PI7C9X440SLBFDEX PCIe-to-USB 2.0 Host Controller | Diodes
Référence : PI7C9X440SLBFDEX ✓ ActifPI7C9X440SLBFDEX Présentation
A PCI Express-to-USB 2.0 host controller is an interface bridge that allows a PCI Express host system to manage USB 2.0 peripherals through an internal controller. It sits between PCI Express system fabric and USB devices, combining the PCIe physical and transaction interface with USB host-controller behavior. The PI7C9X440SL belongs to the broader interface-controller hierarchy: PCIe interface IC, host bridge, USB host controller, and interface semiconductor.
The PI7C9X440SL family is designed for compact, low-power, lead-free, and green systems. Its supported system categories include volume servers, storage systems, embedded equipment, medical systems, industrial automation, networking, IP television, peripherals, and PCI add-in cards. The manufacturer describes the family as a cost-effective PCIe-to-USB 2.0 implementation, while the orderable PI7C9X440SLBFDEX is supplied in the 128-LQFP industrial package identified by the product listing.
Technically, the controller follows PCI Express Base Specification Revision 1.1 and supports both Open Host Controller Interface Revision 1.0a and Enhanced Host Controller Interface Revision 1.0. This combination addresses systems that require USB host support alongside a PCI Express-based platform. The 128-pin LQFP provides a defined lead arrangement for multilayer PCB routing, while the listed package size supports integration with established embedded and add-in-card layouts.
Typical implementations place PI7C9X440SLBFDEX between a PCI Express host and internal or external USB 2.0 ports. Server and storage designs can use it to consolidate USB host access in a compact controller implementation. Embedded, medical, and industrial systems can use the same controller family where a PCIe processor platform must service USB 2.0 peripherals without using a discrete USB host controller.
PCB planning must follow the pin assignments, reference design, clock requirements, power rails, and layout guidance in the manufacturer datasheet. Because this controller combines differential PCIe signaling with USB 2.0 interface requirements, controlled impedance, clean power distribution, and careful connector or cable routing are essential. The exposed thermal pad information for the target package should be followed with adequate copper area and thermal via placement where required.
This product record combines the manufacturer's controller specifications with exact-order-part packaging information, verified lifecycle purchasing references, and application-oriented design guidance. It also distinguishes the orderable PI7C9X440SLBFDEX from related family and package references so engineers can confirm footprint, protocol, and sourcing requirements before committing a design to production.
Alternatives de remplacement direct pour PI7C9X440SLBFDEX — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PI7C9X440SLBFDEX (même facteur de forme et même empreinte) — différant par Lead-Free Status, Package, Product Type.
PI7C9X440SLBFDE
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PI7C9X440SLBFDEX Valeurs maximales et caractéristiques électriques
| Product Type | PCI Express-to-USB 2.0 host controller |
| PCI Express Interface | PCI Express Base Specification Revision 1.1 |
| USB Interface | USB 2.0 |
| Open Host Controller Interface | Open Host Controller Interface Specification Revision 1.0a |
| Enhanced Host Controller Interface | Enhanced Host Controller Interface Specification Revision 1.0 |
| Boîtier | 128-pin LQFP, 14 mm x 14 mm |
| Type de montage | Surface mount |
| Orderable Part | PI7C9X440SLBFDEX |
| Primary Function | PCIe-to-USB 2.0 host bridge |
| Lead-Free Status | Lead-free design |
| Green System Support | Designed for low-power, lead-free, and green systems |
| Statut RoHS | Compliant |
| Standard Qty | 1,000 pieces |
Guide de configuration des broches du PI7C9X440SLBFDEX 128-pin lqfp, 14 mm x 14 mm
Configuration des broches du PI7C9X440SLBFDEX (boîtier 128-pin lqfp, 14 mm x 14 mm). Ce composant de puissance comporte des bornes de grille, de drain et de source. Pour les boîtiers non polarisés, consultez la fiche technique du fabricant pour l'orientation exacte de la broche 1 et les détails de l'empreinte. Les applications courantes incluent la conception d'alimentations, la commande de moteurs et la commutation de charges.
Aucune donnée de brochage détaillée disponible pour PI7C9X440SLBFDEX.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PI7C9X440SLBFDEX convient pour 6 applications: Embedded PCIe-to-USB Expansion, Industrial Automation Equipment, Server and Storage USB Connectivity, Medical Equipment Interface, Networking and IP-TV Systems, PCI Add-in Card and Peripheral Expansion.
Embedded PCIe-to-USB Expansion
PI7C9X440SLBFDEX fits embedded platforms that expose PCI Express but need to manage USB 2.0 peripherals internally. Its PCIe interface complies with PCI Express Base Specification Revision 1.1, while the controller supports Open Host Controller Interface Revision 1.0a and Enhanced Host Controller Interface Revision 1.0. The 128-pin LQFP package, measuring 14 mm by 14 mm, supports integration with multilayer embedded boards. Implement the clock, supply, ground, and signal routing shown in the manufacturer reference design, and confirm operating-temperature requirements against the final enclosure because the controller combines high-speed differential routing with USB host-interface functionality.
Recommandé
Industrial Automation Equipment
The PI7C9X440SLBFDEX is appropriate for industrial automation equipment combining a PCI Express control path with USB 2.0 service or peripheral interfaces. The manufacturer identifies industrial automation among the PI7C9X440SL family's intended systems and describes the device as a cost-effective PCIe-to-USB 2.0 implementation. Its compliance with PCI Express Revision 1.1 and the OHCI 1.0a and EHCI 1.0 interface revisions provides the required protocol foundation. Layout must preserve signal integrity through controlled-impedance routing, clean reference planes, and careful isolation from motors, relays, and switching power stages commonly found in industrial systems.
Recommandé
Server and Storage USB Connectivity
PI7C9X440SLBFDEX can add USB 2.0 host connectivity to volume servers, storage systems, and PCI add-in cards that use a PCI Express host interface. The controller provides PCIe Base Specification Revision 1.1 support together with Open Host Controller Interface Revision 1.0a and Enhanced Host Controller Interface Revision 1.0, making it suitable for systems requiring an internal USB host function. In a server or storage enclosure, preserve the manufacturer's recommended layer stack, connector geometry, power distribution, and thermal-via pattern. This approach avoids treating a generic USB-to-PCIe device as a board-level substitute because protocol direction and host-side electrical integration must match.
Recommandé
Medical Equipment Interface
The PI7C9X440SLBFDEX can support USB 2.0 peripheral connectivity in medical equipment built around a PCI Express processor or controller platform. The manufacturer explicitly lists medical systems among the PI7C9X440SL family's target applications. Its documented PCIe Revision 1.1, OHCI Revision 1.0a, and EHCI Revision 1.0 support provides a defined basis for the host interface, while the 128-pin LQFP package supports conventional surface-mount assembly. Medical-system designers must also apply their own isolation, safety, EMC, and environmental requirements; controller protocol compliance alone does not establish compliance for the finished medical product.
Recommandé
Networking and IP-TV Systems
PI7C9X440SLBFDEX is suitable for networking and IP-TV products that need USB 2.0 device support from a PCI Express-based system controller. These applications often combine multiple external peripheral functions in a compact enclosure, making the documented 128-pin LQFP implementation and manufacturer reference design useful for predictable PCB integration. The PCI Express Revision 1.1 interface and USB 2.0 host support should be validated against the host platform's expected topology. Pay particular attention to layer transitions, return paths, clock integrity, and keepouts so the controller operates reliably beside Ethernet, storage, and display-related circuitry.
Recommandé
PCI Add-in Card and Peripheral Expansion
The PI7C9X440SLBFDEX supports PCI add-in card and peripheral-expansion designs where a PCIe host board must expose USB 2.0 functionality. The manufacturer lists add-in cards and peripherals among the PI7C9X440SL family's applications and describes the controller as a cost-effective system-building block. Its 128-pin LQFP package provides a defined land pattern for multilayer cards, while support for OHCI 1.0a and EHCI 1.0 enables legacy and enhanced host-controller operation. Designers should follow the reference connector and routing geometry, maintain return-path continuity, and validate board-connector clearance and chassis grounding independently of the controller footprint.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PI7C9X440SLBFDEX — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PI7C9X440SLBFDE |
|---|---|---|
| Package | 128-LQFP (14 mm x 14 mm) | 128-LQFP (14 mm x 14 mm) |
| Brand | Diodes Incorporated | Diodes Incorporated |
| Primary Function | PCI Express-to-USB 2.0 host controller | PCI Express-to-USB 2.0 host controller |
| PCI Express Compliance | PCI Express Base Specification Revision 1.1 | PCI Express Base Specification Revision 1.1 |
| USB Interface | USB 2.0 | USB 2.0 |
| OHCI Support | Open Host Controller Interface Revision 1.0a | Open Host Controller Interface Revision 1.0a |
| EHCI Support | Enhanced Host Controller Interface Revision 1.0 | Enhanced Host Controller Interface Revision 1.0 |
| System Positioning | Cost-effective PCIe-to-USB 2.0 solution for low-power, lead-free, and green systems | Same PI7C9X440SL base functionality and system positioning |
| Target Applications | Servers, storage, embedded systems, medical, industrial automation, networking, IP TV, peripherals, and PCI add-in cards | Same PI7C9X440SL family target applications |
| Pin Count | 128 pins | 128 pins |
Principaux différenciateurs
- Combines PCI Express Revision 1.1 and USB 2.0 host functionality (vs PI7C9X440SLBFDE)
- Exact 128-LQFP orderable configuration (vs PI7C9X440SLBFDE)
- Designed for a broad set of PCIe host systems (vs PI7C9X440SLBFDE)
Notes de conception
Use the manufacturer PI7C9X440SL reference layout and pin-description table for the complete 128-pin LQFP assignment. Route the PCI Express differential pairs as controlled-impedance nets with continuous reference planes and avoid splits or unnecessary stubs. Keep the controller's clock and supply connections short, place decoupling at the associated pins, and preserve the manufacturer-defined keepouts around high-speed and thermal-pad features.
Separate the controller's supply distribution from noisy switching and motor-drive nodes where the board architecture permits. Follow the manufacturer guidance for supply, ground, and decoupling connectivity rather than substituting generic bulk-capacitor arrangements. Validate every rail against the datasheet limits and include adequate local high-frequency bypassing at the device. Power-plane sizing must account for the controller's operating current and the dynamic behavior of the surrounding host system.
The 128-LQFP package may include an exposed thermal pad, so provide the land pattern, copper area, and thermal vias required by the manufacturer package drawing. Confirm whether the pad is electrically connected before assigning it to a ground or power plane. For compact server, storage, and embedded systems, model the junction-temperature rise with actual copper area, airflow, and neighboring heat sources because a nominal package drawing alone does not represent finished-board cooling performance.
Treat the PCIe interface as a high-speed differential signal path. Use the manufacturer's reference stackup or an equivalent validated multilayer PCB construction, maintain impedance continuity through layer changes, and avoid routing through noisy power-converter regions. USB 2.0 routing also benefits from short return paths, continuous ground planes, and controlled via stubs. Validate the completed board with signal-integrity measurements because PI7C9X440SLBFDEX combines PCIe signaling with USB host connectivity.
Do not substitute a USB 3.x bridge or a USB-to-PCIe device without engineering review; direction, protocol generation, and electrical interfaces differ even when the connector appears similar. Confirm that the board footprint and exposed-pad connection match the exact 128-LQFP ordering code, and verify that required host-platform support for OHCI and EHCI is present. Use the manufacturer pin table for all assignments rather than inferring signals from connector positions.
Informations de conformité
The manufacturer describes PI7C9X440SL as a low-power, lead-free, and green-system solution, and the product listing identifies the part as RoHS compliant.