PIC16F1707-I/SS - 8-bit 32MHz 3.5KB Flash MCU | Microchip
Référence : PIC16F1707-I/SS ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.85 | $1,85 |
| 10 | $1.62 | $16,20 |
| 100 | $1.32 | $132,00 |
| 500 | $1.1 | $550,00 |
| 1 000 | $0.95 | $950,00 |
PIC16F1707-I/SS Présentation
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus that integrates a CPU, RAM, non-volatile program memory, and peripheral IP. The PIC® XLP™ family is positioned in the broader taxonomy: 8-bit MCU -> RISC microcontroller -> flash microcontroller -> PIC® XLP™ -> microcontroller IC -> integrated circuit -> semiconductor. The PIC16F1707 sits at the low-cost, low-power end of the PIC16 mid-range family and adds analog-rich peripherals not commonly found in this segment.
Key differentiating features include on-chip operational amplifiers, Core Independent Peripherals (CIPs) such as Complementary Output Generator (COG) and Zero Cross Detect (ZCD), and Peripheral Pin Select (PPS) that allows flexible signal routing. The device is well suited for applications where both analog front-end conditioning and digital control are required on the same die.
Architecturally, the PIC16F1707 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, supporting C and XC8 compiler workflows. The combination of XLP sleep currents, hardware CIP blocks, and on-chip op-amps enables designers to remove external analog components, reducing BOM cost and PCB area.
Typical applications include consumer appliance control, sensor signal conditioning, LED lighting drivers, low-power IoT edge nodes, and small motor-control signal chains. Designers select this part when they need more analog integration than a basic PIC16F150x, but less memory than a PIC16F171x.
When designing with this device, choose a debug probe compatible with the ICSP™ programming interface and budget at least 2 mA of VDD current for the analog peripherals during full-load ADC sampling.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster PCB reuse and qualified second-source selection for the PIC16F1707-I/SS.
Alternatives de remplacement direct pour PIC16F1707-I/SS — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16F1707-I/SS (même facteur de forme et même empreinte) — différant par Package, ADC, Program Memory (Flash), Core Architecture, Core Independent Peripherals.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16F1707-I/ML
✅ Remplacement direct✓ En stock
$0.72 / unité
Voir la fiche technique →PIC16F1707T-I/SS
✅ Remplacement direct✓ En stock
$0.89 / unité
Voir la fiche technique →PIC16F1709-I/SS
✅ Remplacement direct✓ En stock
$1.1 / unité
Voir la fiche technique →PIC16F15254-I/SS
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$0.55 / unité
Voir la fiche technique →PIC16F15344-I/SS
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$0.79 / unité
Voir la fiche technique →PIC16F1574-I/P
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$0.91 / unité
Voir la fiche technique →PIC16F1707-I/SS Valeurs maximales et caractéristiques électriques
| Core Processor | PIC |
| Core Size | 8-bit |
| Core Architecture | Enhanced Mid-range PIC16 with 14-bit instruction word |
| Program Memory Type | Flash |
| Program Memory Size | 3.5 KB (2K x 14) |
| RAM Size | 256 bytes |
| Maximum CPU Speed | 32 MHz |
| ADC | 10-bit, integrated |
| Température de fonctionnement | -40C to +85C (Industrial) |
| On-chip Op Amps | Yes (per product brief) |
| Core Independent Peripherals | COG (Complementary Output Generator), ZCD (Zero Cross Detect) |
| Peripheral Pin Select (PPS) | Yes |
| Connectivity | I2C, SPI, LIN |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Boîtier | 20-SSOP (0.209", 5.30 mm width) |
| Package Code | SSOP |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de PIC16F1707-I/SS
| Broche 1 | RA5 — GPIO/Analog input |
| Broche 2 | RA4 — GPIO/Analog input |
| Broche 3 | RA3/MCLR — GPIO or Master Clear (Reset) input |
| Broche 4 | RC5 — GPIO |
| Broche 5 | RC4 — GPIO |
| Broche 6 | RC3 — GPIO |
| Broche 7 | RC2 — GPIO |
| Broche 8 | RC1 — GPIO |
| Broche 9 | RC0 — GPIO |
| Broche 10 | VSS — Ground reference |
| Broche 11 | RA2 — GPIO/Analog input |
| Broche 12 | RA1 — GPIO/Analog input/ICSPCLK |
| Broche 13 | RA0 — GPIO/Analog input/ICSPDAT |
| Broche 14 | RB7 — GPIO |
| Broche 15 | RB6 — GPIO |
| Broche 16 | RB5 — GPIO |
| Broche 17 | RB4 — GPIO |
| Broche 18 | RC7 — GPIO |
| Broche 19 | RC6 — GPIO |
| Broche 20 | VDD — Positive supply voltage |
Applications typiques
PIC16F1707-I/SS convient pour 7 applications: Sensor Signal Conditioning, Consumer Appliance Control, LED Lighting Driver, Low-Power IoT Edge Node, Small Motor Control Signal Chain, Industrial Control Logic Module, Battery Charging Controller.
Sensor Signal Conditioning
The PIC16F1707-I/SS fits sensor signal conditioning applications because its on-chip op-amps and 10-bit ADC eliminate external analog components. The integrated rail-to-rail op-amps amplify weak sensor signals such as those from thermistors, photodiodes, or bridge-type pressure sensors with adjustable gain through internal resistor networks. The COG peripheral generates excitation waveforms, while ZCD detects AC line crossings for isolated sensor interfaces. Placed in a low-power sensor module, the PIC16F1707's XLP sleep current and 256-byte RAM provide enough working memory for moving-average filters and threshold-detection algorithms before transmitting via I2C to a host MCU.
Recommandé
Consumer Appliance Control
The PIC16F1707-I/SS suits consumer appliance control because of its 32 MHz CPU speed and Core Independent Peripherals that handle timing-critical tasks in hardware. COG produces dead-band-controlled complementary PWM for driving half-bridge motor or heater circuits without CPU intervention, freeing the core for user-interface logic. ZCD synchronizes AC load switching to zero-crossing events, reducing inrush current and EMI in triac-controlled loads. With 3.5 KB of flash and 256 bytes of RAM, it accommodates control logic for small kitchen appliances, fans, or coffee machines while running from a single 3.3V rail.
Recommandé
LED Lighting Driver
The PIC16F1707-I/SS is ideal for LED lighting driver applications because the COG peripheral generates precise complementary PWM with programmable dead-band control, eliminating external MOSFET driver ICs. The on-chip op-amps condition current-sense signals for constant-current regulation across LED strings, while the 10-bit ADC provides sufficient resolution for brightness calibration. Peripheral Pin Select allows flexible PCB layout by remapping PWM outputs to available pins. With 32 MHz operation and industrial temperature range, the PIC16F1707 supports dimming protocols including DALI and 0-10V analog dimming via internal ADC.
Recommandé
Low-Power IoT Edge Node
The PIC16F1707-I/SS is well suited for battery-powered IoT edge sensor nodes because of its XLP technology providing sub-microampere sleep currents and fast wake-up times. The on-chip op-amps amplify sensor signals during active mode, while the 10-bit ADC digitizes readings at programmable sample rates. The PIC16F1707-I/SS is typically paired with a separate radio module via SPI, with the MCU's PPS allowing flexible pin assignment for SPI interface signals. With 3.5 KB flash, it supports small communication stacks, and its -40C to +85C industrial range ensures reliable operation in outdoor and industrial IoT deployments.
Recommandé
Small Motor Control Signal Chain
The PIC16F1707-I/SS fits small motor control signal chain applications because the COG peripheral generates precision complementary PWM with hardware dead-band insertion, simplifying brushless DC and stepper motor commutation. ZCD synchronizes motor control to back-EMF zero crossings for sensorless control algorithms in low-cost BLDC fan or pump designs. The on-chip op-amps condition current-sense signals from low-side shunt resistors, while the 10-bit ADC samples phase currents at the PWM rate. The 32 MHz CPU executes FOC or trapezoidal commutation routines with 200 ns instruction cycles, making the PIC16F1707 a capable choice for sub-100W motor applications.
Recommandé
Industrial Control Logic Module
The PIC16F1707-I/SS serves industrial control logic module applications requiring reliable 8-bit processing with on-chip analog integration. The 32 MHz CPU executes ladder-logic-style decision trees and PID loops at high enough rates for thermal, flow, or pressure control loops. Brown-out detection, power-on reset, and watchdog timer provide robust reset management for unattended industrial deployments. The -40C to +85C industrial temperature range qualifies the device for factory-floor environments, while its 20-SSOP package is footprint-compatible with the PIC16F1709-I/SS upgrade path for firmware expansions.
Recommandé
Battery Charging Controller
The PIC16F1707-I/SS works as a battery charging controller because its on-chip op-amps condition voltage and current sense signals without external instrumentation amplifiers. The 10-bit ADC samples battery voltage and charge current at rates suitable for CC-CV (constant-current constant-voltage) charging algorithms. COG generates timing-controlled PWM to drive a synchronous buck converter's gate driver, while ZCD synchronizes the converter to a rectified AC source in offline charger designs. With 3.5 KB of flash and 256 bytes of RAM, the PIC16F1707 supports Li-ion, lead-acid, and NiMH charge profiles in small consumer charger products.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16F1707-I/SS — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16F1707-I/ML | PIC16F1707T-I/SS | PIC16F1709-I/SS | PIC16F15254-I/SS |
|---|---|---|---|---|---|
| Package | 20-SSOP | 20-QFN (different footprint, same die) | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 3.5 KB | 3.5 KB - same | 3.5 KB - same | 7.25 KB | 7 KB |
| RAM | 256 bytes | 256 bytes - same | 256 bytes - same | 512 bytes | 512 bytes |
| Maximum CPU Speed | 32 MHz | 32 MHz - same | 32 MHz - same | 32 MHz - same | 32 MHz - same |
| On-chip Op-amps | Yes | Yes - same | Yes - same | Yes - same | No |
| COG Peripheral | Yes | Yes - same | Yes - same | Yes - same | No |
| ADC Resolution | 10-bit | 10-bit - same | 10-bit - same | 10-bit - same | 10-bit - same |
| Temperature Range | -40C to +85C | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same |
| RoHS | Compliant | Compliant | Compliant | Compliant | Compliant |
Principaux différenciateurs
- Integrated op-amps, COG, and ZCD peripherals in PIC16 mid-range family (vs PIC16F1705-I/SS)
- More flash and RAM than PIC16F1707 for firmware upgrades (vs PIC16F1707-I/SS)
- Same package, modern peripheral set (vs PIC16F15254-I/SS)
Notes de conception
Place a 100 nF decoupling capacitor as close as possible to the VDD pin (pin 20) and a bulk capacitor of at least 10 uF on the supply rail. The PIC16F1707's on-chip analog peripherals (op-amps, ADC) draw current in short bursts during conversion; insufficient decoupling will inject switching noise into the analog readings. For battery-powered designs, leverage the XLP sleep modes (Sleep, Doze, Idle) to achieve sub-microampere quiescent current when the application is idle between measurements.
Route the ICSPDAT (RA0) and ICSPCLK (RA1) signals to a 6-pin header or Tag-Connect footprint for in-circuit programming and debugging. Keep these traces short (under 50 mm) and avoid routing near high-current switching nodes. For PPS-enabled designs, document the pin mapping in firmware comments to facilitate PCB layout reuse across PIC16F170x variants.
Estimated: The MCLR pin (RA3) must be tied to VDD through a 10 kohm pull-up resistor for normal operation; leaving it floating prevents code execution. Do not exceed the absolute maximum rating of 6.5V on any pin (including VDD), as the PIC16F1707 is not 5V-tolerant on all I/O. When using Peripheral Pin Select, unlock the PPS registers in the correct sequence per the datasheet INTCON and APFCON register descriptions; failure to do so causes the peripheral outputs to remain mapped to default pins.
Informations de conformité
RoHS compliance confirmed per Microchip product page. Not AEC-Q100 qualified - automotive applications should evaluate PIC16F1707-E/SS extended temperature variants or AEC-Q100 qualified PIC16F equivalents.
