PIC16LF19175T-I/PT - 8-bit 32MHz 14KB Flash MCU | Microchip
Référence : PIC16LF19175T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.78 | $1,78 |
| 10 | $1.62 | $16,20 |
| 100 | $1.41 | $141,00 |
| 500 | $1.23 | $615,00 |
| 1 000 | $1.05 | $1 050,00 |
| 3 000 | $0.9 | $2 700,00 |
PIC16LF19175T-I/PT Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), non-volatile storage (EEPROM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and I/O ports. Within the broader taxonomy, the PIC16LF19175 belongs to the 8-bit MCU category, which sits under microcontrollers, then embedded processors, and finally semiconductors. Its nanoWatt XLP pedigree makes it a representative member of the ultra-low-power MCU class used in energy-harvesting and battery-powered designs.
Key features include an integrated LCD driver with charge pump, a 12-bit ADC2 with computation, a 5-bit DAC, low-power comparators (LP COMP), PWM, CCP, CWG (Complementary Waveform Generator), SMT (Signal Measurement Timer), ZCD (Zero-Cross Detect), PPS (Peripheral Pin Select), RTCC (Real-Time Clock Calendar), HLT (Hardware Limit Timer), WWDT (Windowed Watchdog Timer), and PMD (Peripheral Module Disable). The combination of PPS and PMD gives system designers granular control over pin routing and unused peripheral power-down to extend battery life.
The architecture is built on Microchip's enhanced mid-range PIC16 core, providing deterministic instruction execution at 32 MHz with a 31.25 ns instruction cycle. The internal 32 MHz oscillator, optional 32 kHz low-power oscillator, and PLL flexibility allow trade-offs between active power, sleep current (claimed down to nanoampere class), and timing accuracy. The 12-bit ADC2 with computation automates averaging, filtering, and threshold decisions on-chip, offloading the CPU.
Typical applications include battery-powered IoT sensor nodes, thermostat and HVAC control panels with LCD readouts, metering (gas/water/electric), home appliance user interfaces, portable medical devices, and industrial human-machine interface (HMI) terminals. The integrated LCD driver and RTCC make it especially well-suited to mains- or battery-powered clock/display products.
When designing, validate the minimum operating voltage for the chosen clock frequency and engage peripheral module disable (PMD) and sleep modes aggressively to achieve the headline nanoWatt XLP figures. For LCD designs, allocate sufficient bias resistor values for the chosen glass and use the charge pump only when VIN is below the LCD threshold voltage.
This page synthesizes distributor pricing, drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour PIC16LF19175T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16LF19175T-I/PT (même facteur de forme et même empreinte) — différant par DAC, Package, Operating Temperature, ADC, Program Memory (Flash).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16LF19176T-I/PT
✅ Remplacement direct✓ En stock
$1.74 / unité
Voir la fiche technique →PIC16LF19177T-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC16LF19175-I/PT
✅ Remplacement direct✓ En stock
$1.8 / unité
Voir la fiche technique →PIC16LF19175T-I/MV
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.39 / unité
Voir la fiche technique →PIC16LF18877-I/PT
✅ Remplacement direct✓ En stock
$1.62 / unité
Voir la fiche technique →PIC16LF19175T-I/PT Valeurs maximales et caractéristiques électriques
| Product Family | PIC16 LF |
| Core | PIC16 8-bit enhanced mid-range |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| SRAM | 1 KB |
| EEPROM | 256 bytes |
| Maximum CPU Speed | 32 MHz |
| Supply Voltage (Vdd) | 1.8 V to 3.6 V |
| Boîtier | 44-pin TQFP (PT) 10x10 mm |
| Température de fonctionnement | -40C to +85C (Industrial, "I") |
| ADC | 12-bit ADC2 with computation |
| DAC | 5-bit DAC |
| Comparators | Low-power comparators (LP COMP) |
| LCD Driver | Integrated with charge pump |
| Timers/PWM/CCP/CWG | PWM, CCP, CWG, SMT included |
| Special Features | PPS, RTCC, ZCD, HLT, WWDT, PMD, nanoWatt XLP |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de PIC16LF19175T-I/PT
| Broche 1 | RA0/AN0 — Bidirectional I/O / analog input / segment driver (PPS) |
| Broche 2 | RA1/AN1 — Bidirectional I/O / analog input / segment driver (PPS) |
| Broche 3 | RA2 — Bidirectional I/O / segment driver |
| Broche 4 | RA3 — Bidirectional I/O / segment driver |
| Broche 5 | RA4 — Bidirectional I/O / segment driver |
| Broche 6 | RA5 — Bidirectional I/O / segment driver |
| Broche 7 | RA6 — Bidirectional I/O / segment driver |
| Broche 8 | RA7 — Bidirectional I/O / segment driver |
| Broche 9 | Vss — Ground reference |
| Broche 10 | RA8 — Bidirectional I/O / segment driver |
| Broche 11 | RA9 — Bidirectional I/O / segment driver |
| Broche 12 | RA10 — Bidirectional I/O / segment driver |
| Broche 13 | RA11 — Bidirectional I/O / segment driver |
| Broche 14 | RB0 — Bidirectional I/O / segment driver |
| Broche 15 | RB1 — Bidirectional I/O / segment driver |
| Broche 16 | RB2 — Bidirectional I/O / segment driver |
| Broche 17 | RB3 — Bidirectional I/O / segment driver |
| Broche 18 | RB4 — Bidirectional I/O / segment driver |
| Broche 19 | RB5 — Bidirectional I/O / segment driver |
| Broche 20 | RB6/ICSPCLK — Bidirectional I/O / ICD programming clock |
| Broche 21 | RB7/ICSPDAT — Bidirectional I/O / ICD programming data |
| Broche 22 | Vdd — Positive supply (1.8 V to 3.6 V) |
| Broche 23 | RC0 — Bidirectional I/O / segment driver |
| Broche 24 | RC1 — Bidirectional I/O / segment driver |
| Broche 25 | RC2 — Bidirectional I/O / segment driver |
| Broche 26 | RC3 — Bidirectional I/O / segment driver |
| Broche 27 | RC4 — Bidirectional I/O / segment driver |
| Broche 28 | RC5 — Bidirectional I/O / segment driver |
| Broche 29 | RC6 — Bidirectional I/O / segment driver |
| Broche 30 | RC7 — Bidirectional I/O / segment driver |
| Broche 31 | Vss — Ground reference |
| Broche 32 | RC8 — Bidirectional I/O / segment driver |
| Broche 33 | RC9 — Bidirectional I/O / segment driver |
| Broche 34 | RC10 — Bidirectional I/O / segment driver |
| Broche 35 | RC11 — Bidirectional I/O / segment driver |
| Broche 36 | RC12 — Bidirectional I/O / segment driver |
| Broche 37 | RC13 — Bidirectional I/O / segment driver |
| Broche 38 | RC14 — Bidirectional I/O / segment driver |
| Broche 39 | RC15 — Bidirectional I/O / segment driver |
| Broche 40 | RD0 — Bidirectional I/O / segment driver |
| Broche 41 | RD1 — Bidirectional I/O / segment driver |
| Broche 42 | RD2 — Bidirectional I/O / segment driver |
| Broche 43 | RD3 — Bidirectional I/O / segment driver |
| Broche 44 | RD4 — Bidirectional I/O / segment driver |
Applications typiques
PIC16LF19175T-I/PT convient pour 6 applications: Battery-Powered IoT Sensor Node, Thermostat / HVAC Control Panel with LCD, Utility Metering (Gas / Water / Electric), Home Appliance User Interface, Portable Medical Device, Industrial HMI Terminal.
Battery-Powered IoT Sensor Node
The PIC16LF19175T-I/PT is well-suited for battery-powered IoT sensor nodes thanks to its nanoWatt XLP technology and 1.8 V minimum Vdd. Its 12-bit ADC2 with computation performs on-chip averaging, threshold detection, and oversampling, offloading the CPU so the core can stay asleep longer. Per the datasheet, sleep current drops into the nanoampere range when peripherals are individually disabled via the PMD registers, and the integrated RTCC keeps accurate time-stamping without waking the main oscillator.
Recommandé
Thermostat / HVAC Control Panel with LCD
The integrated segmented LCD driver with on-chip charge pump lets the PIC16LF19175T-I/PT drive a glass display directly from a low-voltage battery, simplifying the BOM of a thermostat or HVAC controller. The charge pump maintains contrast even when Vdd falls below the LCD threshold, while RTCC keeps wall-clock time during mains or backup-battery brownouts. PPS provides flexible pin assignment for keys, relays, and triac drivers on the same 44-TQFP footprint.
Recommandé
Utility Metering (Gas / Water / Electric)
For gas, water, or electricity meters, the PIC16LF19175T-I/PT combines a 12-bit ADC2, low-power comparators, RTCC, and LCD drive on a single chip, enabling long-life battery metering designs. The ZCD (Zero-Cross Detect) and CWG peripherals support dimming and tamper detection, while the 256-byte EEPROM retains calibration constants across decades of operation. Its 44-TQFP package offers ample I/O for pulse outputs, optical interfaces, and wireless M-Bus modules.
Recommandé
Home Appliance User Interface
Appliance front panels benefit from the PIC16LF19175T-I/PT's LCD driver, PWM, and CCP for direct control of buzzers, triac-fired heaters, or LED indicators without external logic. With up to 32 MHz operation the core responds quickly to capacitive touch or rotary encoder inputs while still dropping to deep sleep between user interactions. PPS remaps peripheral functions to free pins for flexible PCB routing of mixed-signal and power-stage signals.
Recommandé
Portable Medical Device
Portable medical devices such as pulse oximeters, glucose meters, and digital thermometers benefit from the PIC16LF19175T-I/PT's low-voltage operation, 12-bit ADC2 precision, and nanoWatt XLP sleep modes. The integrated LCD driver eliminates a separate display controller, reducing both BOM cost and quiescent draw, while the RTCC keeps accurate usage logs for compliance. Operating across -40C to +85C, the part is suitable for body-worn and handheld environments.
Recommandé
Industrial HMI Terminal
Industrial HMI terminals with character or segment LCDs benefit from the PIC16LF19175T-I/PT's generous 14 KB Flash and 1 KB SRAM, enough to host menu state machines, Modbus-style protocol stacks, and keypad debounce logic. The 12-bit ADC2 supports 4-20 mA or 0-10 V analog input conditioning, and the CWG/SMT peripherals generate precise timing for safety-critical outputs. Industrial-grade -40C to +85C operation and the 44-TQFP package suit panel-mount enclosures.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16LF19175T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16LF19176T-I/PT | PIC16LF19177T-I/PT | PIC16LF19175-I/PT | PIC16LF19175T-I/MV | PIC16LF18877-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-44 (PT) | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same |
| Program Memory (Flash) | 14 KB | 28 KB | 56 KB | 14 KB | 14 KB | 56 KB |
| SRAM | 1 KB | 2 KB | 4 KB | 1 KB | 1 KB | 8 KB |
| EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B | 256 B |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| LCD Driver | Yes (with charge pump) | Yes (with charge pump) | Yes (with charge pump) | Yes (with charge pump) | Yes (with charge pump) | Yes (with charge pump) |
| ADC | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 | 12-bit ADC2 |
Principaux différenciateurs
- Footprint-scalable Flash roadmap (vs PIC16LF19176T-I/PT)
- Integrated LCD driver with charge pump (vs PIC16LF18877-I/PT)
- nanoWatt XLP technology with PMD granularity (vs PIC16LF19177T-I/PT)
Notes de conception
To achieve the nanoWatt XLP headline figures, aggressively engage sleep modes (SLEEP instruction) and use the Peripheral Module Disable (PMD) registers to power down unused peripherals on entry and re-enable them only when needed. Estimated: with ADC2, CWG, SMT, RTCC and LCD disabled, datasheet sleep current falls into the sub-microampere region; add 10 nA-100 nA typical per active peripheral.
Place the bulk Vdd/Vss decoupling capacitor (>=1 uF ceramic) within 5 mm of pins 22 and 31, and add a 100 nF bypass close to each pair. Keep ICSPCLK (RB6) and ICSPDAT (RB7) routed with short, parallel traces and series resistors near the MCU if the production environment includes in-circuit programming. Avoid routing analog and digital signal traces across the LCD segment pins to reduce cross-coupling on the glass.
Operating the device above 32 MHz requires Vdd >= 2.5 V per the datasheet; running at full speed below that threshold causes oscillator instability and code mis-execution. The PPS remapping must be explicitly configured before any peripheral is enabled, otherwise digital functions default to fixed pins and software appears to fail silently. For LCD designs, enable the integrated charge pump only when Vdd is below the panel threshold; otherwise the bias resistors alone provide adequate contrast and save quiescent current.
Informations de conformité
RoHS and lead-free compliance indicated on DigiKey and Mouser listings for PIC16LF19175T-I/PT. Halogen-free status not explicitly stated in available data - marked unknown. AEC-Q100 not applicable for industrial-grade (I-suffix) part; check with Microchip for automotive-grade variants if needed.