PIC18F4423-E/ML - 8-bit MCU, 16KB Flash, 40MHz, 44-VQFN | Microchip
Référence : PIC18F4423-E/ML ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.4431 | $4,44 |
| 10 | $4 | $40,00 |
| 100 | $3.62 | $362,00 |
| 500 | $3.2 | $1 600,00 |
| 1 000 | $2.85 | $2 850,00 |
PIC18F4423-E/ML Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. Within the broader semiconductor hierarchy, an MCU is a sub-category of microprocessors, sitting alongside DSPs, FPGAs, and microcontrollers in the embedded compute taxonomy. PIC microcontrollers from Microchip use a Harvard RISC architecture with separate program and data buses, executing most instructions in a single cycle. The PIC18 family is Microchip's high-performance 8-bit line, providing C-compiler-friendly architecture, hardware multiply, and rich peripheral integration.
The PIC18F4423 operates from 4.2 V to 5.5 V and includes peripherals such as an enhanced USART, MSSP (SPI/I2C), Capture/Compare/PWM modules, 10-bit ADC with up to 13 channels, and nanoWatt features including idle, sleep, and run-time power modes. Its 16 KB flash supports self-programming and ICSP (In-Circuit Serial Programming). The 'F' designation means flash-based program memory, allowing field-upgradeable firmware.
Architecturally, the PIC18F4423 uses a 16-bit instruction word with 8-bit data path, and supports a 31-level hardware stack and software-managed memory model. The 10-bit ADC samples at rates suitable for control loops and slow analog sensing; the PWM/CEC pins support motor, lighting, and switching power control.
Typical applications include industrial control, sensor interfaces, low-end motor control, consumer appliances, and human-machine interfaces (HMI). The 40 MHz clock and 36 I/O lines support moderate-density designs requiring multiple analog inputs and serial communication.
For designers, the extended temperature grade ('-E') allows automotive and industrial environments without special screening, while the 44-VQFN package is footprint-compatible with several other PIC18F44xx devices, easing PCB reuse across variants. Note that PIC18F devices with the same pin count but different memory sizes in the same package are usually drop-in compatible with code adjustments only.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour PIC18F4423-E/ML — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18F4423-E/ML (même facteur de forme et même empreinte) — différant par Operating Temperature, Package, Communication, Core Architecture, Program Memory (Flash).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18F4423-I/ML
✅ Remplacement direct✓ En stock
$4.05 / unité
Voir la fiche technique →PIC18F43K22-E/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F4420-E/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18LF4423-I/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F43K20-E/ML
✅ Remplacement direct✓ En stock
$1.38 / unité
Voir la fiche technique →PIC18F4423-E/ML Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC18 (8-bit Harvard RISC) |
| Program Memory Type | Flash |
| Program Memory Size | 16 KB (8K x 16) |
| RAM Size | 768 bytes |
| EEPROM Size | 256 bytes |
| Maximum CPU Frequency | 40 MHz |
| Performance | 10 MIPS |
| Supply Voltage (VDD) | 4.2 V to 5.5 V |
| I/O Pins | 36 |
| ADC | 10-bit, up to 13 channels |
| Package Type | 44-pin VQFN (8x8 mm) with exposed pad |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +125C (extended grade, '-E') |
| Communication Interfaces | UART, SPI, I2C (MSSP), Enhanced USART |
| Timers/PWM | Capture/Compare/PWM modules |
| Statut RoHS | Compliant |
| Niveau MSL | 3 (168 hours) |
Configuration des broches de PIC18F4423-E/ML
| Broche 1 | RA0/AN0 — Digital I/O / Analog input channel 0 |
| Broche 2 | RA1/AN1 — Digital I/O / Analog input channel 1 |
| Broche 3 | RA2/AN2/VREF- — Digital I/O / Analog input channel 2 / ADC VREF- |
| Broche 4 | RA3/AN3/VREF+ — Digital I/O / Analog input channel 3 / ADC VREF+ |
| Broche 5 | RA4/T0CKI — Digital I/O / Timer0 clock input |
| Broche 6 | RA5/AN4/SS — Digital I/O / Analog input / SPI slave select |
| Broche 7 | RE0/RD — Digital I/O / Parallel port read control |
| Broche 8 | RE1/WR — Digital I/O / Parallel port write control |
| Broche 9 | RE2/CS — Digital I/O / Parallel port chip select |
| Broche 10 | VDD — Positive power supply (4.2V to 5.5V) |
| Broche 11 | VSS — Ground reference |
| Broche 12 | OSC1/CLKI — Crystal oscillator input / external clock |
| Broche 13 | OSC2/CLKO — Crystal oscillator output |
| Broche 14 | RC0/T1OSO — Digital I/O / Timer1 oscillator output |
| Broche 15 | RC1/T1OSI/CCP2 — Digital I/O / Timer1 oscillator input / Capture/Compare/PWM 2 |
| Broche 16 | RC2/CCP1 — Digital I/O / Capture/Compare/PWM 1 |
| Broche 17 | RC3/SCK/SCL — Digital I/O / SPI clock / I2C clock |
| Broche 18 | RD0/PSP0 — Digital I/O / Parallel slave port bit 0 |
| Broche 19 | RD1/PSP1 — Digital I/O / Parallel slave port bit 1 |
| Broche 20 | RD2/PSP2 — Digital I/O / Parallel slave port bit 2 |
| Broche 21 | RD3/PSP3 — Digital I/O / Parallel slave port bit 3 |
| Broche 22 | RC4/SDI/SDA — Digital I/O / SPI data in / I2C data |
| Broche 23 | RC5/SDO — Digital I/O / SPI data out |
| Broche 24 | RC6/TX/CK — Digital I/O / USART TX / clock |
| Broche 25 | RC7/RX/DT — Digital I/O / USART RX / data |
| Broche 26 | RD4/PSP4 — Digital I/O / Parallel slave port bit 4 |
| Broche 27 | RD5/PSP5 — Digital I/O / Parallel slave port bit 5 |
| Broche 28 | RD6/PSP6 — Digital I/O / Parallel slave port bit 6 |
| Broche 29 | RD7/PSP7 — Digital I/O / Parallel slave port bit 7 |
| Broche 30 | VSS — Ground reference |
| Broche 31 | VDD — Positive power supply (4.2V to 5.5V) |
| Broche 32 | RB0/INT0 — Digital I/O / External interrupt 0 |
| Broche 33 | RB1/INT1 — Digital I/O / External interrupt 1 |
| Broche 34 | RB2/INT2 — Digital I/O / External interrupt 2 |
| Broche 35 | RB3/INT3/CCP2 — Digital I/O / External interrupt 3 / CCP2 alternate |
| Broche 36 | RB4 — Digital I/O / interrupt-on-change |
| Broche 37 | RB5 — Digital I/O / interrupt-on-change |
| Broche 38 | RB6/PGC — Digital I/O / ICSP clock |
| Broche 39 | RB7/PGD — Digital I/O / ICSP data |
| Broche 40 | MCLR/VPP — Master clear reset / programming voltage |
| Broche 41 | RA6 — Digital I/O |
| Broche 42 | RA7 — Digital I/O |
| Broche 43 | VSS — Ground reference |
| Broche 44 | VDD — Positive power supply (4.2V to 5.5V) |
Applications typiques
PIC18F4423-E/ML convient pour 6 applications: Industrial Sensor Interface, Low-End Motor Control, Consumer Appliance Control, Automotive Body Electronics (Non-AEC-Q100), Human-Machine Interface (HMI) Controller, Smart Energy / Metering.
Industrial Sensor Interface
The PIC18F4423-E/ML's 13-channel 10-bit ADC and 36 I/O lines let it interface to multiple analog sensors (temperature, pressure, flow) and digital actuators in industrial control panels. Its extended -40C to +125C temperature grade supports factory-floor environments, while the 40 MHz core handles PID control loops at sub-millisecond intervals. The UART/SPI/I2C peripherals connect to HMIs, displays, and supervisory PLCs without external transceivers.
Recommandé
Low-End Motor Control
The PIC18F4423-E/ML's Capture/Compare/PWM modules and 10-bit ADC make it suitable for BLDC, stepper, and DC motor control at moderate speeds. The 40 MHz CPU executes FOC or trapezoidal commutation routines with adequate headroom, while the 16 KB flash holds lookup tables and PID parameters. Industrial grade temperature rating supports motor housings exposed to high ambient heat.
Recommandé
Consumer Appliance Control
The PIC18F4423-E/ML's 36 I/O and nanoWatt power management suit white-goods controllers (washing machines, dishwashers, ovens) where multiple relays, keypads, and display drivers interface to a single MCU. The 10-bit ADC reads temperature probes, while PWM outputs control valve actuators. Extended temperature operation tolerates steam and heat near oven enclosures.
Recommandé
Automotive Body Electronics (Non-AEC-Q100)
The PIC18F4423-E/ML with extended temperature grade is used in non-safety automotive body electronics such as seat controllers, mirror adjusters, and interior lighting. Its PWM outputs drive LED backlights and motor actuators, while the ADC reads potentiometers and current shunts. Note: For AEC-Q100-qualified automotive designs, the equivalent automotive-grade PIC18F variant must be selected.
Recommandé
Human-Machine Interface (HMI) Controller
The PIC18F4423-E/ML drives character LCD or simple graphic OLED displays through SPI, scans keypads via I/O expansion, and reads rotary encoders through timer-capture inputs. Its 40 MHz core refreshes displays at 60 Hz without flicker, while the 768-byte RAM holds UI strings and screen buffers. The 16 KB flash accommodates multi-language menus and state machines.
Recommandé
Smart Energy / Metering
The PIC18F4423-E/ML's 10-bit ADC samples current and voltage from shunt resistors and potential dividers for basic single-phase energy metering. Its UART connects to GSM/GPRS or LoRa modules for AMI backhaul, while EEPROM stores calibration constants and tariff tables. Extended temperature rating allows outdoor meter enclosures under direct sunlight.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18F4423-E/ML — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18F4423-I/ML | PIC18F43K22-E/ML | PIC18F4420-E/ML | PIC18LF4423-I/ML | PIC18F43K20-E/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-VQFN (8x8 mm) | 44-VQFN (8x8 mm) - same | 44-VQFN (8x8 mm) - same | 44-VQFN (8x8 mm) - same | 44-VQFN (8x8 mm) - same | 44-VQFN (8x8 mm) - same |
| Flash Memory | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 8 KB (-50%) |
| RAM Size | 768 bytes | 768 bytes | 1.5 KB | 768 bytes | 768 bytes | 512 bytes |
| Maximum Clock Speed | 40 MHz | 40 MHz | 64 MHz | 40 MHz | 40 MHz | 64 MHz |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 2.3 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 3.6 V | 2.3 V to 5.5 V |
| Temperature Grade | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) |
| ADC Resolution | 10-bit | 10-bit | 12-bit | 10-bit | 10-bit | 10-bit |
| Low-Power Mode | nanoWatt | nanoWatt | XLP (<50 nA sleep) | Standard | nanoWatt | XLP (<50 nA sleep) |
Principaux différenciateurs
- Extended industrial temperature grade (-40C to +125C) (vs PIC18F4423-I/ML)
- nanoWatt power management features (vs PIC18F4420-E/ML)
- Pin-compatible upgrade path to XLP family (vs PIC18F43K22-E/ML)
Notes de conception
Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 3 mm of each VDD pin (the PIC18F4423-E/ML has three VDD pins on pins 10, 31, and 44). Add a bulk 10 uF tantalum or aluminum-polymer capacitor on the main supply rail. For noise-sensitive analog designs, separate analog VDD (AVDD) and digital VDD (DVDD) planes with ferrite beads, and use star-ground routing for the ADC reference pins (RA2/VREF- and RA3/VREF+).
The 44-VQFN package requires a 0.5 mm pitch land pattern with a central thermal pad. The exposed pad (EP) must be soldered to a copper pour on the PCB for thermal dissipation and ground integrity. Connect the EP to the ground plane with at least 9 thermal vias (0.3 mm drill) to reduce thermal resistance. Per IPC-7351, follow Microchip's recommended land pattern document for proper solder joint reliability.
Do not connect the MCLR pin (pin 40) directly to VDD. Use a 10 kohm pull-up resistor and a 100 nF capacitor to ground for proper reset behavior. For ICSP programming, leave RB6/PGC and RB7/PGD accessible. Avoid using PORTC<3:0> as inputs during reset - they default to analog mode and may cause excessive current draw if left floating. Configure unused I/O pins as outputs driving low to minimize quiescent current.
Estimated: at maximum operating frequency (40 MHz) and 5.5 V supply, the PIC18F4423-E/ML core current is approximately 16 mA, plus peripheral current (ADC, timers). With the 44-VQFN thermal pad connected to 1 square inch of copper pour, theta_JA is approximately 35 C/W, allowing 0.7 W dissipation at 25 C ambient. At 125 C ambient, derate by 70% to maintain reliability. Use the exposed pad to maximize heat dissipation.
Route the crystal traces (OSC1, OSC2) short and direct, with guard traces to ground on both sides. Keep ADC analog signals (AN0-AN13) away from switching digital lines; if cross-over is unavoidable, use perpendicular routing. Place the voltage reference bypass capacitor (100 nF) within 5 mm of the VREF+/VREF- pins. Follow Microchip AN1254 (ADC design) for optimal 10-bit ADC performance.
Informations de conformité
RoHS and REACH compliant per Microchip product declarations and LCSC/Heisener distributor listings. Not AEC-Q100 qualified; use PIC18F automotive-grade variants for full automotive compliance. Lead-free terminations, MSL-3 (168 hours) per JEDEC J-STD-020.
