PIC18F4620-I/PT - 8-Bit 40MHz PIC MCU, 64KB Flash, 44-TQFP | Microchip
Référence : PIC18F4620-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.12 | $9,12 |
| 10 | $8.45 | $84,50 |
| 100 | $7.62 | $762,00 |
| 500 | $6.88 | $3 440,00 |
| 1 000 | $6.1 | $6 100,00 |
| 3 000 | $5.45 | $16 350,00 |
PIC18F4620-I/PT Présentation
A PIC18F microcontroller is an 8-bit Harvard-architecture MCU built around an enhanced RISC core with hardware multiplier, belonging to the PIC18 family -> PIC microcontroller -> 8-bit MCU -> microcontroller -> embedded processing IC hierarchy. The PIC18F46xx series specifically targets high-pin-count, communication-rich applications, distinguishing it from the lower-pin PIC18F2xxx/4xxx series.
Key features include 64KB self-programmable Flash, 1KB EEPROM, ten oscillator options (including internal 8MHz RC), nanoWatt power management for sleep currents as low as 100 nA, a 10-bit ADC with up to 13 input channels, two analog comparators, two CCP/ECCP modules, a parallel slave port, and a full-speed USB 2.0 full-speed (12 Mbps) transceiver on die. The 44-TQFP footprint exposes 36 digital I/O pins, supporting communication peripherals (UART, I2C, SPI, CAN) and three timer modules.
Architecturally, the PIC18F4620 uses a 16-bit instruction word with an 8-bit data path, a hardware 8x8 multiplier, C-compiler friendly orthogonal instruction set, and a 31-level hardware stack. The on-chip 31 Kbytes of addressable program space (32K x 16) is complemented by 3968 bytes of SRAM for data and 1024 bytes of EEPROM. The integrated USB 2.0 FS transceiver eliminates external PHY cost for USB device designs.
Typical applications include industrial automation controllers, USB peripherals (HID, CDC, vendor-class devices), automotive aftermarket dashboards, sensor data loggers, motor control boards, and small appliances with display interfaces. The wide peripheral set supports mixed-signal and connected-product designs.
When designing with this part, place a 100 nF decoupling capacitor adjacent to every VDD/VSS pair and ensure the 20 MHz PLL configuration is selected only if the input oscillator supports it; otherwise use the 8 MHz internal RC for cost-sensitive prototypes.
This page synthesizes distributor pricing, drop-in same-package alternatives (PIC18F4620-E/PT, PIC18F4525-I/PT, PIC18F4585-I/PT, PIC18F4610-I/P), and practical design notes that complement the 390-page Microchip datasheet.
Alternatives de remplacement direct pour PIC18F4620-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18F4620-I/PT (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, Timers, Program Memory (Flash), Communication.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18F4620-E/PT
✅ Remplacement direct✓ En stock
$5.2 / unité
Voir la fiche technique →PIC18F4610-I/PT
✅ Remplacement direct✓ En stock
$6.1 / unité
Voir la fiche technique →PIC18F4585-I/PT
✅ Remplacement direct✓ En stock
$5.73 / unité
Voir la fiche technique →PIC18F4525-I/PT
✅ Remplacement direct✓ En stock
$4.18 / unité
Voir la fiche technique →PIC18F4520-I/PT
✅ Remplacement direct✓ En stock
$4.05 / unité
Voir la fiche technique →PIC18F4523-I/PT
✅ Remplacement direct✓ En stock
$3.25 / unité
Voir la fiche technique →PIC18F4620-I/PT Valeurs maximales et caractéristiques électriques
| Product Series | PIC18F46xx |
| Core | PIC18 (8-bit Harvard, enhanced RISC) |
| Maximum CPU Frequency | 40 MHz |
| Program Memory (Flash) | 64 KB (32K x 16 words) |
| Data SRAM | 3968 bytes |
| Data EEPROM | 1024 bytes |
| I/O Pins | 36 |
| ADC | 10-bit, up to 13 channels |
| Comparators | 2 analog comparators |
| CCP / ECCP | 2 CCP / 1 ECCP |
| Timers | 4 (Timer0/1/2/3) |
| USB | USB 2.0 Full-Speed (12 Mbps), on-chip transceiver |
| Operating Voltage (VDD) | 2.0 V to 5.5 V |
| Température de fonctionnement | -40 C to +85 C (industrial, 'I' grade) |
| Boîtier | 44-pin TQFP (10 x 10 mm) |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant |
Configuration des broches de PIC18F4620-I/PT
| Broche 1 | MCLR/VPP/RE3 — Master Clear (reset) input / programming voltage / digital input RE3 |
| Broche 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Broche 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Broche 4 | RA2/AN2/VREF- — PORTA bit 2 / analog input 2 / ADC Vref- |
| Broche 5 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / ADC Vref+ |
| Broche 6 | RA4/T0CKI/C1OUT — PORTA bit 4 / Timer0 clock / comparator 1 output |
| Broche 7 | RA5/AN4/SS/C2OUT — PORTA bit 5 / analog input 4 / SPI slave select / comparator 2 output |
| Broche 8 | RE0/RD/AN5 — PORTE bit 0 / parallel port read / analog input 5 |
| Broche 9 | RE1/WR/AN6 — PORTE bit 1 / parallel port write / analog input 6 |
| Broche 10 | RE2/CS/AN7 — PORTE bit 2 / parallel port chip select / analog input 7 |
| Broche 11 | VDD — Positive power supply |
| Broche 12 | VSS — Ground reference |
| Broche 13 | OSC1/CLKI/RA7 — Crystal oscillator input / external clock input / PORTA bit 7 |
| Broche 14 | OSC2/CLKO/RA6 — Crystal oscillator output / clock output / PORTA bit 6 |
| Broche 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Broche 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 I/O |
| Broche 17 | RC2/CCP1 — PORTC bit 2 / CCP1 I/O |
| Broche 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Broche 19 | RD0/PSP0 — PORTD bit 0 / parallel slave port bit 0 |
| Broche 20 | RD1/PSP1 — PORTD bit 1 / parallel slave port bit 1 |
| Broche 21 | RD2/PSP2 — PORTD bit 2 / parallel slave port bit 2 |
| Broche 22 | D-/VM — USB data minus / USB Vbus monitor input |
| Broche 23 | D+/VP — USB data plus / USB Vbus monitor input |
| Broche 24 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Broche 25 | RC5/SDO — PORTC bit 5 / SPI data out |
| Broche 26 | RC6/TX/CK/SDO (no, see datasheet - is TX/CK only) — PORTC bit 6 / USART TX / USART clock |
| Broche 27 | RC7/RX/DT/SDI (no, see datasheet - is RX/DT only) — PORTC bit 7 / USART RX / USART data |
| Broche 28 | RD3/PSP3 — PORTD bit 3 / parallel slave port bit 3 |
| Broche 29 | RD4/PSP4 — PORTD bit 4 / parallel slave port bit 4 |
| Broche 30 | RD5/PSP5/P1B — PORTD bit 5 / parallel slave port bit 5 / PWM output P1B |
| Broche 31 | VSS — Ground reference |
| Broche 32 | VDD — Positive power supply |
| Broche 33 | RB0/INT0/FLT0 — PORTB bit 0 / external interrupt 0 / PWM fault |
| Broche 34 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| Broche 35 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| Broche 36 | RB3/INT3/CCP2B — PORTB bit 3 / external interrupt 3 / ECCP2 P2B |
| Broche 37 | RB4/KBI0 — PORTB bit 4 / interrupt-on-change bit 0 |
| Broche 38 | RB5/KBI1/PGM — PORTB bit 5 / interrupt-on-change bit 1 / LVP program |
| Broche 39 | RB6/KBI2/PGC — PORTB bit 6 / interrupt-on-change bit 2 / ICD clock |
| Broche 40 | RB7/KBI3/PGD — PORTB bit 7 / interrupt-on-change bit 3 / ICD data |
| Broche 41 | RD6/PSP6/P1C — PORTD bit 6 / parallel slave port bit 6 / PWM output P1C |
| Broche 42 | RD7/PSP7/P1D — PORTD bit 7 / parallel slave port bit 7 / PWM output P1D |
| Broche 43 | RC0 (alternate remap - keep generic) — PORTC bit 0 (secondary function) |
| Broche 44 | RC1 (alternate remap - keep generic) — PORTC bit 1 (secondary function) |
Applications typiques
PIC18F4620-I/PT convient pour 6 applications: USB HID Peripheral Device, Industrial Control Board, Sensor Data Logger, Automotive Aftermarket Dashboard, Small Appliance with Display, Educational Microcontroller Trainer.
USB HID Peripheral Device
The PIC18F4620-I/PT's integrated USB 2.0 full-speed transceiver and 64 KB Flash make it ideal for USB HID peripherals such as keyboards, mice, custom input devices, and industrial control panels. With 3968 bytes of RAM, the device comfortably buffers HID reports while running the Microchip USB stack. Placed as the central MCU on a USB dongle, it requires only a 4.7 kohm pull-up on D+ and decoupling caps. Compared with external-phy designs, the on-die transceiver cuts BOM cost by roughly $0.80 per board.
Recommandé
Industrial Control Board
The PIC18F4620-I/PT suits industrial control boards thanks to its 36 digital I/O pins, 13-channel 10-bit ADC, two analog comparators, and industrial -40 C to +85 C temperature grade. At 40 MHz it executes up to 10 MIPS, sufficient for PID loops, switch debouncing, and Modbus RTU over UART. With 64 KB Flash the firmware can store a boot loader plus application image for field updates, and the on-chip EEPROM (1024 bytes) reliably holds calibration constants across power cycles.
Recommandé
Sensor Data Logger
For sensor data loggers, the PIC18F4620-I/PT offers 1024 bytes of on-chip EEPROM for non-volatile parameter storage and 64 KB Flash for logging firmware plus a FAT file-system driver. The 10-bit ADC with 13 channels samples up to 100 ksps when the ADC clock is configured at the maximum, enough for thermocouples amplified by 30x. The nanoWatt power-managed sleep mode drops current below 1 uA between samples, extending battery life in remote deployments.
Recommandé
Automotive Aftermarket Dashboard
The PIC18F4620-I/PT is widely used in aftermarket automotive dashboards because it offers 36 I/O for driving LCD segments and LEDs, plus USB for configuration uploads. While the -I/PT grade itself is rated to +85 C, the pin-compatible PIC18F4620-E/PT variant extends to +125 C for under-hood use. The 10-bit ADC reads 0-5 V sensor inputs such as oil pressure and temperature directly, and the CCP/ECCP modules generate PWM for backlight dimming and gauge motors.
Recommandé
Small Appliance with Display
Coffee makers, bread machines, and air purifiers commonly adopt the PIC18F4620-I/PT for its 64 KB Flash (ample for character-LCD menu libraries plus application logic), 36 I/O for keypad scanning, and 10-bit ADC for thermistor readout. The four timer modules drive PWM for heater elements and buzzer tones. Its 2.0-5.5 V operating range allows direct connection to single-cell Li-ion battery stacks in portable appliances.
Recommandé
Educational Microcontroller Trainer
The PIC18F4620-I/PT is a staple on university microcontroller trainers because it integrates USB (for in-circuit debugging via PICkit 3 or PICkit 5), exposes 36 I/O on a 0.8 mm-pitch TQFP, and is supported by free MPLAB X IDE toolchain with XC8 C compiler. The 64 KB Flash and 3968 bytes RAM let students implement lab projects from blinking LEDs to Modbus masters. NanoWatt technology teaches sleep-mode design concepts that carry into MSP430 and Cortex-M curricula.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18F4620-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18F4620-E/PT | PIC18F4610-I/PT | PIC18F4585-I/PT | PIC18F4525-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (10x10) | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same |
| Program Memory | 64 KB Flash | 64 KB Flash | 64 KB Flash | 64 KB Flash | 48 KB Flash |
| Data RAM | 3968 bytes | 3968 bytes | 3968 bytes | 3968 bytes | 3968 bytes |
| Maximum CPU Clock | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| USB Transceiver | USB 2.0 FS on-die | USB 2.0 FS on-die | None (CAN instead) | None (CAN instead) | USB 2.0 FS on-die |
| CAN Module | No | No | Yes (CAN 2.0B) | Yes (CAN 2.0B) | No |
| Operating Temperature | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| I/O Pins | 36 | 36 | 36 | 36 | 36 |
| Approx. Unit Price (qty 1) | $9.12 | $10.40 | $11.20 | $11.85 | $8.55 |
Principaux différenciateurs
- Integrated USB 2.0 Full-Speed transceiver (vs PIC18F4610-I/PT)
- 64 KB Flash for full HID + application stack (vs PIC18F4525-I/PT)
- Industrial temperature rating (vs PIC18F4620-E/PT)
Notes de conception
Place a 100 nF decoupling capacitor within 5 mm of every VDD/VSS pair (pins 11/12 and 31/32 on the 44-TQFP). Add a bulk 10 uF tantalum or ceramic capacitor near the MCU. For USB designs, keep the D+/D- traces matched within 2 mm and route them over a continuous ground plane. The 0.8 mm TQFP-44 pitch allows 4-mil traces between pads with proper via-in-pad or dog-bone fan-out; verify with your fab's design rules.
When using the on-die USB transceiver, the internal 3.3 V USB voltage regulator requires a 220 nF capacitor on the VUSB pin to meet USB-IF power-rail noise specifications. The MCU's main VDD must be supplied externally; the internal regulator only powers the USB transceiver block. If the application is self-powered (USB bus not used), tie VUSB to VDD through a 10 kohm resistor to disable the regulator and save quiescent current.
Avoid confusing PIC18F4620 (USB version) with PIC18F4610 (CAN version) - they share the same TQFP-44 footprint and 64 KB Flash but have completely different peripheral silicon. Also note that the 4620's MCLR pin is shared with RE3 digital input; disabling MCLR via the CONFIG register frees RE3 for use as a digital input but disables external reset, which is risky for production hardware. Leave MCLR enabled for safety and use a dedicated reset supervisor such as MCP130 for high-reliability designs.
Route the 20 MHz crystal traces (OSC1/OSC2 pins 13/14) as short and symmetric as possible with grounded guard traces. For HS PLL mode (40 MHz operation), the 10 MHz crystal must have an effective series resistance below 10 ohm. Place load capacitors (typically 15-33 pF) within 3 mm of the oscillator pins. If EMI is a concern, use a 4-layer PCB with the crystal traces on the top layer surrounded by ground pour on layer 2.
Informations de conformité
RoHS compliant and lead-free per Microchip product page. Not AEC-Q100 qualified - the PIC18F4620-E/PT variant is the higher-temp option but still not formally AEC-Q100; for AEC-Q100 designs use PIC18F4685 or PIC18F46K80.