PIC18F6620-I/PT - 8-Bit MCU, 64KB Flash, 25MHz, TQFP-64 | Microchip
Référence : PIC18F6620-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.1 | $9,10 |
| 10 | $8.2 | $82,00 |
| 100 | $7.05 | $705,00 |
| 500 | $6.3 | $3 150,00 |
| 1 000 | $5.55 | $5 550,00 |
PIC18F6620-I/PT Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals. The PIC18 family uses an enhanced 8-bit Harvard RISC architecture with a modified instruction set that is both C-compiler friendly and assembly-efficient. Within the broader semiconductor taxonomy, an MCU sits in the integrated-circuit hierarchy as: microcontroller -> embedded processor -> digital IC -> semiconductor device. PIC18F66xx devices specifically target high-pin-count industrial, instrumentation, and human-machine-interface designs.
Key features include five capture/compare/PWM modules, a 12-channel 10-bit analog-to-digital converter (ADC), two USART modules, an MSSP configurable as either SPI or I2C, two Addressable USARTs, and self-programming flash with In-Circuit Debug (ICD). The part runs from 2.0 V to 5.5 V, accepts an industrial temperature range of -40C to +85C, and supports both internal and external oscillator modes for flexible clocking.
Architecturally, the PIC18F6620 uses a 16-bit instruction word with an 8-bit data path, a hardware multiplier for fast math, a priority-level interrupt controller, and a 31-level hardware stack. Self-programming allows bootloader-based firmware updates in the field, while ICD support enables real-time debugging through two pins without consuming I/O.
Typical applications include industrial control panels, instrumentation, HVAC controllers, automotive body and climate electronics, USB-to-UART bridging via the USART peripherals, and white-goods user interfaces. The 12-bit ADC and generous I/O count make it ideal for sensor aggregation boards.
When designing with this part, ensure decoupling capacitors are placed within 5 mm of the VDD/VSS pairs, that the MCLR pin is pulled high through the recommended 10 kohm resistor, and that the in-circuit debugger is connected only during development. A common pitfall is leaving the LVD (low-voltage detect) disabled when designing for brown-out-sensitive applications.
This page synthesizes drop-in alternatives, application circuits, and design notes not available in the standalone Microchip datasheet, giving engineers a one-stop reference for selecting and applying the PIC18F6620-I/PT.
Alternatives de remplacement direct pour PIC18F6620-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18F6620-I/PT (même facteur de forme et même empreinte) — différant par Package, Core Architecture, I/O Pins, Operating Temperature, EEPROM.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18F6720-I/PT
✅ Remplacement direct✓ En stock
$21.1 / unité
Voir la fiche technique →PIC18F6628-I/PT
✅ Remplacement direct✓ En stock
$5.2 / unité
Voir la fiche technique →PIC18F6680-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F65K90-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F65K80-I/PT
✅ Remplacement direct✓ En stock
$3.62 / unité
Voir la fiche technique →PIC18F65K40-I/PT
✅ Remplacement direct✓ En stock
$1.95 / unité
Voir la fiche technique →PIC18F6620-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC18 enhanced 8-bit Harvard RISC |
| Program Flash | 64 KB (32K x 16) |
| SRAM | 3,840 bytes |
| EEPROM | 1,024 bytes |
| Maximum Clock Speed | 25 MHz (10 MIPS) |
| Supply Voltage (VDD) | 2.0 V to 5.5 V |
| Digital I/O Pins | 52 |
| ADC | 10-bit, 12 channels |
| CCP/PWM Modules | 5 |
| USART Modules | 2 (one enhanced) |
| MSSP | 1 (SPI or I2C configurable) |
| Plage de température de fonctionnement | -40C to +85C (industrial) |
| Boîtier | TQFP-64 (PT) 10x10 mm |
| Type de montage | Surface Mount |
| Self-Programming | Yes |
| In-Circuit Debug | Yes (ICD) |
| Statut RoHS | Compliant |
Configuration des broches de PIC18F6620-I/PT
| Broche 1 | MCLR — Master Clear (reset) input, internal pull-up enabled by configuration |
| Broche 2 | RA0/AN0 — PORTA bit 0 / analog channel 0 |
| Broche 3 | RA1/AN1 — PORTA bit 1 / analog channel 1 |
| Broche 4 | RA2/AN2/VREF- — PORTA bit 2 / analog channel 2 / ADC negative reference |
| Broche 5 | RA3/AN3/VREF+ — PORTA bit 3 / analog channel 3 / ADC positive reference |
| Broche 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Broche 7 | RA5/AN4/SS — PORTA bit 5 / analog channel 4 / SPI slave select |
| Broche 8 | RE0/RD — PORTE bit 0 / parallel port read control |
| Broche 9 | RE1/WR — PORTE bit 1 / parallel port write control |
| Broche 10 | RE2/CS — PORTE bit 2 / parallel port chip select |
| Broche 11 | VDD — Positive supply voltage (2.0 V to 5.5 V) |
| Broche 12 | VSS — Ground reference |
| Broche 13 | OSC1/CLKI/RA7 — Crystal oscillator input / external clock input |
| Broche 14 | OSC2/CLKO/RA6 — Crystal oscillator output / clock output |
| Broche 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / clock input |
| Broche 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| Broche 17 | RC2/CCP1 — PORTC bit 2 / CCP1 |
| Broche 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Broche 19 | RD0/PSP0 — PORTD bit 0 / parallel slave port bit 0 |
| Broche 20 | RD1/PSP1 — PORTD bit 1 / parallel slave port bit 1 |
| Broche 21 | RD2/PSP2 — PORTD bit 2 / parallel slave port bit 2 |
| Broche 22 | RD3/PSP3 — PORTD bit 3 / parallel slave port bit 3 |
| Broche 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Broche 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| Broche 25 | RC6/TX1/CK1 — PORTC bit 6 / USART1 transmit / clock |
| Broche 26 | RC7/RX1/DT1 — PORTC bit 7 / USART1 receive / data |
| Broche 27 | RD4/PSP4 — PORTD bit 4 / parallel slave port bit 4 |
| Broche 28 | RD5/PSP5 — PORTD bit 5 / parallel slave port bit 5 |
| Broche 29 | RD6/PSP6/TX2/CK2 — PORTD bit 6 / parallel slave port / USART2 TX |
| Broche 30 | RD7/PSP7/RX2/DT2 — PORTD bit 7 / parallel slave port / USART2 RX |
| Broche 31 | VSS — Ground reference |
| Broche 32 | VDD — Positive supply voltage |
| Broche 33 | RB0/INT0/FLT0 — PORTB bit 0 / external interrupt 0 / PWM fault input |
| Broche 34 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| Broche 35 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| Broche 36 | RB3/INT3/CCP2 — PORTB bit 3 / external interrupt 3 / CCP2 alternate |
| Broche 37 | RB4/KBI0 — PORTB bit 4 / interrupt-on-change bit 0 |
| Broche 38 | RB5/KBI1 — PORTB bit 5 / interrupt-on-change bit 1 |
| Broche 39 | RB6/KBI2/PGC — PORTB bit 6 / interrupt-on-change / ICD clock |
| Broche 40 | RB7/KBI3/PGD — PORTB bit 7 / interrupt-on-change / ICD data |
| Broche 41 | VSS — Ground reference |
| Broche 42 | VDD — Positive supply voltage |
| Broche 43 | RF0/AN5 — PORTF bit 0 / analog channel 5 |
| Broche 44 | RF1/AN6 — PORTF bit 1 / analog channel 6 |
| Broche 45 | RF2/AN7 — PORTF bit 2 / analog channel 7 |
| Broche 46 | RF3/AN8 — PORTF bit 3 / analog channel 8 |
| Broche 47 | RF4/AN9 — PORTF bit 4 / analog channel 9 |
| Broche 48 | RF5/AN10/CVREF — PORTF bit 5 / analog channel 10 / comparator voltage reference |
| Broche 49 | RF6/AN11 — PORTF bit 6 / analog channel 11 |
| Broche 50 | RF7 — PORTF bit 7 |
| Broche 51 | RG0/ECCP3 — PORTG bit 0 / enhanced CCP3 |
| Broche 52 | RG1/ECCP4 — PORTG bit 1 / enhanced CCP4 |
| Broche 53 | RG2/ECCP5/C1OUT — PORTG bit 2 / enhanced CCP5 / comparator 1 output |
| Broche 54 | RG3/CCP4/C2OUT — PORTG bit 3 / CCP4 alternate / comparator 2 output |
| Broche 55 | RG4 — PORTG bit 4 |
| Broche 56 | VSS — Ground reference |
| Broche 57 | VDD — Positive supply voltage |
| Broche 58 | RH0/A16 — PORTH bit 0 / external memory address 16 |
| Broche 59 | RH1/A17 — PORTH bit 1 / external memory address 17 |
| Broche 60 | RH2/A18 — PORTH bit 2 / external memory address 18 |
| Broche 61 | RH3/A19 — PORTH bit 3 / external memory address 19 |
| Broche 62 | RH4 — PORTH bit 4 |
| Broche 63 | RH5 — PORTH bit 5 |
| Broche 64 | RH6 — PORTH bit 6 |
Applications typiques
PIC18F6620-I/PT convient pour 6 applications: Industrial Control Panel, HVAC Climate Controller, Automotive Body Electronics, Instrumentation and Data Acquisition, White Goods User Interface, Sensor Aggregation Hub.
Industrial Control Panel
The PIC18F6620-I/PT fits industrial control panel designs that need 52 I/O pins for keypad scanning, LED or LCD drive, and discrete output switching. With 64 KB flash and 3,840 bytes SRAM, it can run a C-compiled state machine that polls inputs, debounces switches, and updates a graphical display at 60 Hz. The 12-channel 10-bit ADC reads potentiometers and 4-20 mA loop sensors directly. The industrial -40C to +85C temperature range tolerates factory-floor environments, and the 2.0 V to 5.5 V supply lets the panel ride through brown-outs on noisy 24 V rails with a simple buck regulator.
Recommandé
HVAC Climate Controller
The PIC18F6620-I/PT is well matched to HVAC climate controllers that aggregate multiple temperature, humidity, and pressure sensors. The 12-channel ADC plus five CCP/PWM modules drive proportional damper and valve actuators directly without an external DAC. The 64 KB flash holds PID loop code and a graphical menu system. Operating from -40C to +85C, the part survives attic and rooftop unit environments. Two USARTs allow simultaneous connection to a room display board and a Modbus master, and self-programming flash supports remote firmware updates from a service tool.
Recommandé
Automotive Body Electronics
Body control modules for lighting, mirror, and seat position benefit from the PIC18F6620-I/PT's 52 I/O count and 5 PWM channels. The PIC drives multiple LED strings, MOSFET H-bridges for mirror adjustment, and stepper-motor drivers via PWM. The MSSP peripheral handles SPI communication with sensor ASICs, while the two USARTs link to a body-control network. Note that for under-hood AEC-Q100 qualified applications, choose the PIC18F6620-I/PT automotive-grade variant or migrate to PIC18F66K80-I/PT. The 2.0 V to 5.5 V supply is compatible with 12 V automotive rails through a regulator.
Recommandé
Instrumentation and Data Acquisition
Bench-top and rack-mount instruments use the PIC18F6620-I/PT to acquire analog signals through its 12-channel 10-bit ADC, condition them digitally, and stream results via UART or USB bridge. The 3,840-byte SRAM is sufficient for circular sample buffers of 4-8 ksps with chunked USB output, and 64 KB flash holds DSP-style filters and a menu system. The in-circuit debugger accelerates firmware bring-up, while self-programming enables calibration tables to be updated in the field. The 25 MHz core delivers 10 MIPS, more than adequate for per-sample polynomial linearization.
Recommandé
White Goods User Interface
Washing machines, ovens, and dishwashers rely on the PIC18F6620-I/PT to drive segmented LCDs, capacitive touch panels, and rotary encoders. The 52 I/O count supports direct keypad and LED matrix drive without external decoders, while five CCP/PWM channels control motor speed via TRIAC or FET drivers. The 64 KB flash stores multilingual UI strings and diagnostic logs, and self-programming allows service technicians to flash new firmware via a service-mode bootloader. The -40C to +85C industrial range covers the thermal envelope of consumer appliance cabinets.
Recommandé
Sensor Aggregation Hub
The PIC18F6620-I/PT serves as a low-cost sensor aggregation hub for industrial IoT nodes, reading 12 analog sensors via its built-in ADC and dozens of digital sensors via SPI or I2C on the MSSP. The 64 KB flash supports wireless protocol stacks (custom or simple proprietary) and 3,840 bytes SRAM holds short data buffers before Modbus or USART transmission. The two USARTs allow simultaneous connection to a local HMI and an upstream gateway. Operating at 25 MHz, the part can poll 50 sensors at 100 Hz while leaving margin for housekeeping.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18F6620-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18F6720-I/PT | PIC18F6628-I/PT | PIC18F6680-I/PT | PIC18F65K90-I/PT | PIC18F65K80-I/PT | PIC18F65K40-I/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same |
| Program Flash | 64 KB | 128 KB | 64 KB | 64 KB | 32 KB | 32 KB | 32 KB |
| SRAM | 3,840 bytes | 3,840 bytes | 3,936 bytes | 3,328 bytes | 2,048 bytes | 2,048 bytes | 2,048 bytes |
| EEPROM | 1,024 bytes | 1,024 bytes | 1,024 bytes | 1,024 bytes | 1,024 bytes | 1,024 bytes | 1,024 bytes |
| Maximum Clock | 25 MHz (10 MIPS) | 25 MHz (10 MIPS) | 25 MHz (10 MIPS) | 25 MHz (10 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) |
| Digital I/O | 52 | 52 | 54 | 52 | 53 | 53 | 58 |
| ADC | 10-bit, 12 channels | 10-bit, 12 channels | 10-bit, 12 channels | 10-bit, 12 channels | 12-bit, 16 channels | 12-bit, 12 channels | 12-bit, 36 channels |
| Special Feature | Self-programming + ICD | Self-programming + ICD | Self-programming + ICD + 2nd USART | Self-programming + ICD + CAN | Self-programming + ICD + 12-bit ADC | Self-programming + ICD + 12-bit ADC + CAN | Self-programming + ICD + CIP peripherals |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Same footprint, doubled flash memory for future growth (vs PIC18F6720-I/PT)
- Industrial-grade same-footprint upgrade with newer peripherals (vs PIC18F65K90-I/PT)
- CAN-enabled same-footprint option for networked industrial systems (vs PIC18F6680-I/PT)
Notes de conception
Place a 100 nF decoupling capacitor within 5 mm of every VDD/VSS pair (the TQFP-64 has multiple VDD pins: 11, 32, 42, 57). Add a bulk 10 uF tantalum or ceramic capacitor at the board's main VDD entry. The PIC18F6620 has multiple VSS pins (12, 31, 41, 56); ensure all are connected to a low-impedance ground plane, not just one of them, to prevent ground bounce on high-current switching outputs. Avoid routing high-speed signals across the VDD/VSS split to prevent noise injection into the analog reference.
The TQFP-64 has 0.5 mm pitch and is best laid out on a 4-layer PCB with a continuous ground plane beneath the part. Use 0.15 mm trace/space rules for fanout and length-match differential SPI traces. If the board has external analog signals, dedicate one VDD/VSS pair (e.g., pin 11/12) to the analog AVDD/AVSS rail with a ferrite bead or LC filter from the digital VDD. The MCLR pin (pin 1) should pull up to VDD through a 10 kohm resistor and have a 100 nF cap to ground for decoupling; do not leave MCLR floating or the part will intermittently reset.
Three common pitfalls: (1) The MSSP peripheral can be SPI or I2C, but the same pins (RC3/SCK/SCL, RC4/SDI/SDA, RC5/SDO) are shared - configure the peripheral mode in firmware before driving these pins as GPIO or you will get unintended SPI/I2C activity. (2) Many PORTF analog pins (RF0-RF7) default to analog input at reset; if you want them as digital GPIO, set PCFG bits in ADCON1. (3) The CCP2 function is multiplexed between RC1 and RB3; configure the CCP2MX configuration bit correctly before designing the PCB, otherwise your PWM output will not appear on the pin you expect.
The PIC18F6620-I/PT typically dissipates less than 100 mW even at 25 MHz full I/O switching, well below thermal limits for the TQFP-64 package (junction-to-ambient typically around 50 C/W with a 4-layer PCB). However, when designing for sustained 5.5 V operation at industrial temperatures up to +85C, ensure ambient derating does not push junction temperature beyond +125C. In sealed enclosures with no airflow, consider lowering the clock or using sleep modes during idle periods to reduce self-heating.
Informations de conformité
Industrial-grade (-I) part, not AEC-Q100 qualified. For automotive designs, use PIC18F6620-E/PT or PIC18F6620T-I/PT variants per Microchip automotive portfolio. RoHS and REACH compliance per Microchip product declaration.
