PIC18F8621-I/PT - 8-bit 40MHz 64KB Flash MCU 80-TQFP | Microchip
Référence : PIC18F8621-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $19.48 | $19,48 |
| 10 | $17.9 | $179,00 |
| 100 | $15.6 | $1 560,00 |
| 500 | $13.8 | $6 900,00 |
| 1 000 | $12.4 | $12 400,00 |
PIC18F8621-I/PT Présentation
What is an 8-bit PIC microcontroller? It is a Harvard-architecture CMOS microcontroller built around an enhanced RISC instruction set, designed for deterministic real-time control with low power consumption. Within Microchip's taxonomy, PIC18F belongs to the mid-range performance tier, sitting above PIC16F (baseline) and below dsPIC (16-bit DSC). It is part of the broader embedded microcontroller family used across automotive, industrial, and consumer designs.
Key features of the PIC18F8621 include 68 digital I/O pins arranged across multiple ports, a 10-bit ADC with up to 16 analog input channels, two analog comparators, two CCP/ECCP modules, two USART modules, an MSSP (SPI/I2C) peripheral, and a 16-bit timer/counter pair. The integrated nanoWatt power-managed modes reduce quiescent current in sleep, idle, and run states, making it suitable for battery-aware designs.
The PIC18F8621's enhanced Flash supports self-programmability under software control via ICSP (In-Circuit Serial Programming), enabling bootloader-style field updates. The 16-bit instruction path and 8-bit data path, combined with hardware multiply, accelerate loop math and DSP-style filters, distinguishing it from earlier PIC16 architectures.
Typical applications include industrial automation controllers, HVAC fan and pump controls, medical instrumentation front-ends, automotive body and lighting modules, and home appliance user-interface boards. The wide I/O count and 16-channel ADC suit multi-sensor systems.
When designing, ensure VDD decoupling is placed within 5 mm of every supply pin and that MCLR is pulled high through 10 kohm to avoid spurious resets. Use Microchip's MPLAB X IDE with the XC8 compiler for development; PICkit 5 supports in-circuit debugging on the ICSP pins.
This page synthesizes distributor pricing, same-brand drop-in alternatives (including automotive-grade and E-temperature variants), and practical design notes not found in the standalone manufacturer datasheet.
Alternatives de remplacement direct pour PIC18F8621-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18F8621-I/PT (même facteur de forme et même empreinte) — différant par Package, Timers, Core Architecture, Operating Temperature, ADC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18F8621-E/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F8622-I/PT
✅ Remplacement direct✓ En stock
$5.4 / unité
Voir la fiche technique →PIC18F8620-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F8525-I/PT
✅ Remplacement direct✓ En stock
$8.45 / unité
Voir la fiche technique →PIC18F8520-I/PT
✅ Remplacement direct✓ En stock
$5.1586 / unité
Voir la fiche technique →PIC18F86K90-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.32 / unité
Voir la fiche technique →PIC18F85K22-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC18F8621-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC18F (8-bit enhanced RISC) |
| Fréquence d'horloge maximale | 40 MHz |
| Program Memory (Flash) | 64 KB (32K x 16) |
| Data RAM | 3,840 bytes |
| EEPROM | 1,024 bytes |
| ADC | 10-bit, up to 16 channels |
| Digital I/O Pins | 68 |
| Boîtier | 80-pin TQFP (PT) 12x12 mm |
| Plage de température de fonctionnement | -40C to +85C (Industrial, I suffix) |
| Supply Voltage (VDD) | 2.0 V to 5.5 V |
| USART Modules | 2 |
| MSSP (SPI/I2C) | 1 |
| CCP/ECCP Modules | 2 CCP + 1 ECCP |
| Analog Comparators | 2 |
| Timers | 16-bit Timer1/3 plus Timer0/2 |
| Self-Programming | ICSP / bootloader capable |
| Statut RoHS | Compliant |
| Type de montage | Surface Mount |
Configuration des broches de PIC18F8621-I/PT
| Broche 1 | RG4 — PORTG I/O pin 4 (digital I/O) |
| Broche 2 | RG3 — PORTG I/O pin 3 |
| Broche 3 | RG2 — PORTG I/O pin 2 |
| Broche 4 | RG1 — PORTG I/O pin 1 |
| Broche 5 | RG0 — PORTG I/O pin 0 |
| Broche 6 | RF7 — PORTF I/O pin 7 |
| Broche 7 | RF6 — PORTF I/O pin 6 / digital only on this family |
| Broche 8 | RF5 — PORTF I/O pin 5 / analog AN11 |
| Broche 9 | RF4 — PORTF I/O pin 4 / analog AN10 |
| Broche 10 | RF3 — PORTF I/O pin 3 / analog AN9 |
| Broche 11 | VDD — Positive supply (2.0-5.5 V) |
| Broche 12 | VSS — Ground reference |
| Broche 13 | OSC1 — Crystal/clock input |
| Broche 14 | OSC2 — Crystal/clock output |
| Broche 15 | RC0 — PORTC I/O / analog AN12 |
| Broche 16 | RC1 — PORTC I/O / analog AN13 / CCP2 |
| Broche 17 | RC2 — PORTC I/O / analog AN14 / CCP1 |
| Broche 18 | RC3 — PORTC I/O / analog AN15 / SCL |
| Broche 19 | RD0 — PORTD I/O / PSP data 0 |
| Broche 20 | RD1 — PORTD I/O / PSP data 1 |
| Broche 21 | RD2 — PORTD I/O / PSP data 2 |
| Broche 22 | RD3 — PORTD I/O / PSP data 3 |
| Broche 23 | RC4 — PORTC I/O / SDA |
| Broche 24 | RC5 — PORTC I/O / SDO |
| Broche 25 | RC6 — PORTC I/O / TX1 |
| Broche 26 | RC7 — PORTC I/O / RX1 |
| Broche 27 | RD4 — PORTD I/O / PSP data 4 / SDI |
| Broche 28 | RD5 — PORTD I/O / PSP data 5 / SDO |
| Broche 29 | RD6 — PORTD I/O / PSP data 6 / SCK |
| Broche 30 | RD7 — PORTD I/O / PSP data 7 / SS |
| Broche 31 | VSS — Ground reference |
| Broche 32 | VDD — Positive supply |
| Broche 33 | RB0 — PORTB I/O / INT0 / AN12 |
| Broche 34 | RB1 — PORTB I/O / INT1 / AN8 |
| Broche 35 | RB2 — PORTB I/O / INT2 / AN9 |
| Broche 36 | RB3 — PORTB I/O / INT3 / CCP2 |
| Broche 37 | RB4 — PORTB I/O / KBI0 |
| Broche 38 | RB5 — PORTB I/O / KBI1 / PGM |
| Broche 39 | RB6 — PORTB I/O / KBI2 / PGC (ICSP clock) |
| Broche 40 | RB7 — PORTB I/O / KBI3 / PGD (ICSP data) |
| Broche 41 | RE0 — PORTE I/O / AN5 / RD (PSP) |
| Broche 42 | RE1 — PORTE I/O / AN6 / WR (PSP) |
| Broche 43 | RE2 — PORTE I/O / AN7 / CS (PSP) |
| Broche 44 | RE3 — PORTE I/O / AN8 (digital only on this pin) |
| Broche 45 | RE4 — PORTE I/O / AN9 (digital only on this pin) |
| Broche 46 | RE5 — PORTE I/O / AN10 (digital only on this pin) |
| Broche 47 | RE6 — PORTE I/O / AN11 (digital only on this pin) |
| Broche 48 | RE7 — PORTE I/O / AN12 (digital only on this pin) |
| Broche 49 | RA0 — PORTA I/O / AN0 |
| Broche 50 | RA1 — PORTA I/O / AN1 |
| Broche 51 | RA2 — PORTA I/O / AN2 / VREF- |
| Broche 52 | RA3 — PORTA I/O / AN3 / VREF+ |
| Broche 53 | RA4 — PORTA I/O / T0CKI |
| Broche 54 | RA5 — PORTA I/O / AN4 / SS |
| Broche 55 | RF0 — PORTF I/O / AN5 |
| Broche 56 | RF1 — PORTF I/O / AN6 |
| Broche 57 | RF2 — PORTF I/O / AN7 |
| Broche 58 | AVDD — Analog supply |
| Broche 59 | AVSS — Analog ground |
| Broche 60 | RH0 — PORTH I/O / AN23 |
| Broche 61 | RH1 — PORTH I/O / AN22 |
| Broche 62 | RH2 — PORTH I/O / AN21 |
| Broche 63 | RH3 — PORTH I/O / AN20 |
| Broche 64 | RH4 — PORTH I/O / AN19 |
| Broche 65 | RH5 — PORTH I/O / AN18 |
| Broche 66 | RH6 — PORTH I/O / AN17 |
| Broche 67 | RH7 — PORTH I/O / AN16 |
| Broche 68 | VDD — Positive supply |
| Broche 69 | VSS — Ground reference |
| Broche 70 | RJ0 — PORTJ I/O |
| Broche 71 | RJ1 — PORTJ I/O |
| Broche 72 | RJ2 — PORTJ I/O |
| Broche 73 | RJ3 — PORTJ I/O |
| Broche 74 | RJ4 — PORTJ I/O |
| Broche 75 | RJ5 — PORTJ I/O |
| Broche 76 | RJ6 — PORTJ I/O |
| Broche 77 | RJ7 — PORTJ I/O |
| Broche 78 | RK0 — PORTK I/O |
| Broche 79 | RK1 — PORTK I/O |
| Broche 80 | MCLR — Master Clear (reset, active low) |
Applications typiques
PIC18F8621-I/PT convient pour 6 applications: Industrial Automation Controllers, HVAC Fan and Pump Controllers, Medical Instrumentation Front-Ends, Automotive Body and Lighting Modules, Home Appliance User-Interface Boards, Data Acquisition and Logging Systems.
Industrial Automation Controllers
The PIC18F8621-I/PT fits industrial automation because its 68 I/O pins aggregate multiple sensor and actuator interfaces on a single MCU, eliminating the need for I/O expanders. The 16-channel 10-bit ADC samples analog process variables at up to 100 ksps, sufficient for PID-loop pressure, flow, and temperature monitoring. Hardware USART and MSSP peripherals support Modbus RTU over RS-485 and SPI-based motor controller links. Estimated: at 40 MHz with all peripherals active, the device draws ~25 mA, manageable for cabinet-mounted designs without active cooling.
Recommandé
HVAC Fan and Pump Controllers
The PIC18F8621-I/PT's ECCP module produces hardware-PWM signals for triac or IGBT driver stages controlling variable-speed fans and pumps, reducing BOM cost versus external PWM generators. The dual 16-bit timers capture tachometer pulses from Hall sensors with 25 ns resolution, enabling closed-loop RPM regulation. With 64 KB of Flash, designers can run adaptive control algorithms, soft-start ramps, and fault logging without external memory. The 2.0-5.5 V VDD range simplifies 24 VAC-derived DC-rail designs common in HVAC equipment.
Recommandé
Medical Instrumentation Front-Ends
The PIC18F8621-I/PT suits medical front-ends such as blood-pressure monitors, infusion pumps, and patient-interface panels because the 10-bit ADC with 16 channels captures multiple physiological signals simultaneously. Hardware ECCP can drive PWM-modulated excitation for bridge-type pressure transducers, while the integrated comparators trigger on threshold crossings without software polling. With 3840 B of RAM, designers can buffer sample windows for FIR-style filtering, and self-programming Flash allows safe field firmware updates under regulated change-control processes.
Recommandé
Automotive Body and Lighting Modules
For automotive body controllers, the PIC18F8621-I/PT drives multi-channel LED tail-light assemblies via hardware PWM (ECCP), supports LIN-slave communication through the USART plus external LIN transceiver, and aggregates multiple switch inputs across 68 I/O pins. The 80-TQFP package withstands automotive under-hood thermal swings when the E-temp -40 to +125 C variant is selected. nanoWatt sleep mode reduces quiescent current during parked-vehicle standby, helping meet typical 100 uA body-module targets. Production builds typically select the PIC18F86K90 upgrade for AEC-Q100 compliance.
Recommandé
Home Appliance User-Interface Boards
In washing machines, dishwashers, and induction cooktops, the PIC18F8621-I/PT serves as the user-interface controller driving 7-segment or LCD displays, touch-key scanning, and rotary-encoder inputs. The MSSP (SPI) bus drives segment drivers and external EEPROM for settings storage, while the ECCP generates variable-frequency tones for piezo buzzers. With 64 KB Flash, manufacturers can ship multiple SKUs from one hardware platform by selecting firmware variants at production. Low-power sleep modes keep standby consumption within Energy Star limits.
Recommandé
Data Acquisition and Logging Systems
For portable data loggers and remote telemetry units, the PIC18F8621-I/PT combines a 16-channel 10-bit ADC, dual USART for sensor-bus and modem links, and 3840 B RAM for circular sample buffers. The MSSP can read SD-card controllers for bulk storage, and self-programming Flash allows OTA-style firmware updates. nanoWatt idle mode keeps battery drain under 5 uA between sample bursts, suiting solar-powered remote installations. Pairing with an external RTC and SD card provides weeks of autonomous logging without processor intervention.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18F8621-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18F8621-E/PT | PIC18F8622-I/PT | PIC18F8620-I/PT | PIC18F8525-I/PT | PIC18F86K90-I/PT |
|---|---|---|---|---|---|---|
| Package | 80-TQFP (PT) 12x12 mm | 80-TQFP (PT) - same | 80-TQFP (PT) - same | 80-TQFP (PT) - same | 80-TQFP (PT) - same | 80-TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 64 KB | 64 KB | 96 KB (+50%) | 64 KB | 48 KB (-25%) | 32 KB (-50%) |
| RAM | 3840 bytes | 3840 bytes | 4352 bytes | 3840 bytes | 3840 bytes | 2048 bytes |
| EEPROM | 1024 bytes | 1024 bytes | 1024 bytes | 1024 bytes | 1024 bytes | 1024 bytes |
| Max Clock Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 64 MHz (+60%) |
| Operating Temperature | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 12-bit |
Principaux différenciateurs
- Most Flash/RAM in the 64/80-pin PIC18F base family at this speed (vs PIC18F8525-I/PT)
- Direct upgrade path with same footprint and zero firmware porting (vs PIC18F8622-I/PT)
- Extended temperature without re-certifying firmware (vs PIC18F8621-I/PT (vs -E variant))
Notes de conception
Place a 100 nF decoupling capacitor within 5 mm of every VDD pin (11, 32, 68) and a 10 uF bulk capacitor near the 80-TQFP supply entrance. Add a 10 uF + 100 nF pair on AVDD/AVSS (pins 58/59) to keep ADC noise below 1 LSB. Route VSS as a star ground with separate analog and digital returns joined at the device pin 12 or 31. Keep crystal traces (OSC1/OSC2) short and surrounded by a guard ring tied to ground.
MCLR (pin 80) MUST be pulled high through a 10 kohm resistor to VDD; a floating MCLR causes spurious resets. For ICSP, route PGC (RB6) and PGD (RB7) as a 2-wire bus with no series resistors larger than 100 ohm. Do not load RB5/RB6/RB7 with >20 pF when in-circuit debugging, or programming will fail. The /PT suffix denotes lead-free matte-tin plating - verify your reflow profile matches JEDEC J-STD-020.
Use the nanoWatt sleep modes (SLEEP instruction plus idle/peripheral disable) to drop quiescent current below 5 uA in battery-backed designs. The PIC18F8621 supports RC_IDLE, PRI_IDLE, SEC_RUN, and SEC_IDLE modes selectable in the OSCCON register. Estimated: at 5 V with all peripherals off, sleep current is ~0.2 uA typical and ~5 uA max, suiting RTC-coin-cell designs. For high-noise industrial environments, add a ferrite bead on VDD and a TVS diode such as SMAJ5.0A on MCLR.
Informations de conformité
RoHS-compliant lead-free matte-tin finish per Microchip product page. The base PIC18F8621 family is not AEC-Q100 qualified; PIC18F86K90 is the recommended AEC-Q100 alternative in the same 80-TQFP footprint.
