PIC18F95J94-I/PT - 8-bit USB/LCD MCU 64MHz 32KB FLASH | Microchip
Référence : PIC18F95J94-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $7.92 | $7,92 |
| 10 | $7.12 | $71,20 |
| 100 | $6.35 | $635,00 |
| 500 | $5.55 | $2 775,00 |
| 1 000 | $4.95 | $4 950,00 |
PIC18F95J94-I/PT Présentation
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path. As a member of the broader microcontroller category and the wider PIC18 family, the PIC18F95J94 sits inside the Microchip PIC® XLP™ (eXtreme Low Power) line, which targets ultra-low sleep current for battery-powered designs. This device specifically combines a full-speed USB 2.0 peripheral and a segmented LCD driver (up to 480 segments) on-chip - making it a hybrid communication + display MCU, which is rare in the 8-bit space.
Key features include nanoWatt XLP sleep currents as low as the datasheet's spec range, an integrated 12-bit ADC (according to the family datasheet), multiple timers, two SPI/I2C and two UART peripherals, a real-time clock calendar (RTCC) module, and a CTMU charge-time measurement unit for capacitive touch. The 100-TQFP exposes up to 84 I/O lines, supporting large parallel buses or many segmented LCD pixels.
Typical applications include USB human interface (HID) peripherals such as thermostats, blood-pressure monitors and glucose meters with LCD, industrial segment-LCD control panels with USB diagnostics, eMetering / smart-sensor front-ends, and any battery-powered product combining a display and a USB charging or data port.
When designing with this part, ensure the 2.5V to 3.6V VDD range is respected (the J-family runs from a single 3.3V rail, not 5V), provide a stable 12 or 24 MHz crystal for USB Full-Speed operation, and reserve proper bypass capacitors on AVDD/VDD pairs to keep the ADC noise floor low. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour PIC18F95J94-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18F95J94-I/PT (même facteur de forme et même empreinte) — différant par Package, USB, LCD Driver, Program Memory (Flash), ADC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18F96J94-I/PT
✅ Remplacement direct✓ En stock
$5.45 / unité
Voir la fiche technique →PIC18F97J94-I/PT
✅ Remplacement direct✓ En stock
$5.78 / unité
Voir la fiche technique →PIC18F95J94-I/PF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$3.75 / unité
Voir la fiche technique →PIC18F95J94T-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18F96J94-I/PF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$2.17 / unité
Voir la fiche technique →PIC18F95J94-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC18 8-bit RISC |
| Series | PIC® XLP™ 18J |
| Family | PIC18F97J94 family |
| Program Memory Type | FLASH |
| Program Memory Size | 32 KB (16K x 16) |
| Maximum CPU Frequency | 64 MHz |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| Température de fonctionnement | -40 C to +85 C (Industrial) |
| Boîtier | 100-pin TQFP (PT) 12x12 mm |
| Nombre de broches | 100 |
| Type de montage | Surface Mount |
| USB Interface | USB 2.0 Full-Speed (12 Mbps) peripheral |
| LCD Driver | Segmented LCD, up to 480 segments (per family datasheet) |
| Low-Power Technology | nanoWatt XLP |
| Statut RoHS | Compliant |
Configuration des broches de PIC18F95J94-I/PT
| Broche 1 | RB7/SEG39 — Port B bit 7 or LCD segment 39 |
| Broche 2 | RB6/SEG40 — Port B bit 6 or LCD segment 40 |
| Broche 3 | RB5/SEG41 — Port B bit 5 or LCD segment 41 |
| Broche 4 | RB4/SEG42 — Port B bit 4 or LCD segment 42 |
| Broche 5 | RB3/SEG43 — Port B bit 3 or LCD segment 43 |
| Broche 6 | RB2/SEG44 — Port B bit 2 or LCD segment 44 |
| Broche 7 | RB1/SEG45 — Port B bit 1 or LCD segment 45 |
| Broche 8 | RB0/SEG46 — Port B bit 0 or LCD segment 46 |
| Broche 9 | VDD — Core logic supply, 2.0 V to 3.6 V |
| Broche 10 | VSS — Core ground |
| Broche 11 | RC7/SDO — Port C bit 7 or SPI2 E-TOD SDO |
| Broche 12 | RC6/SDI — Port C bit 6 or SPI2 E-TOD SDI |
| Broche 13 | RC5/SCK — Port C bit 5 or SPI2 E-TOD SCK |
| Broche 14 | RC4/SS — Port C bit 4 or SPI2 E-TOD SS |
| Broche 15 | RC3/SCL — Port C bit 3 or I2C2 SCL |
| Broche 16 | RC2/SDA — Port C bit 2 or I2C2 SDA |
| Broche 17 | RC1 — Port C bit 1 |
| Broche 18 | RC0 — Port C bit 0 |
| Broche 19 | OSC2/CLKO — Crystal oscillator output or clock out |
| Broche 20 | OSC1/CLKI — Crystal oscillator input or clock in |
| Broche 21 | RE7/CCP2 — Port E bit 7 or CCP2 PWM/capture |
| Broche 22 | RE6/CCP1 — Port E bit 6 or CCP1 PWM/capture |
| Broche 23 | RE5 — Port E bit 5 |
| Broche 24 | RE4 — Port E bit 4 |
| Broche 25 | RE3/CCP9 — Port E bit 3 or CCP9 PWM |
| Broche 26 | RE2/CCP10 — Port E bit 2 or CCP10 PWM |
| Broche 27 | RE1/CCP8 — Port E bit 1 or CCP8 PWM |
| Broche 28 | RE0/CCP7 — Port E bit 0 or CCP7 PWM |
| Broche 29 | RF7/SEG47 — Port F bit 7 or LCD segment 47 |
| Broche 30 | RF6/SEG48 — Port F bit 6 or LCD segment 48 |
| Broche 31 | RF5/SEG49 — Port F bit 5 or LCD segment 49 |
| Broche 32 | RF4/SEG50 — Port F bit 4 or LCD segment 50 |
| Broche 33 | RF3 — Port F bit 3 |
| Broche 34 | RF2 — Port F bit 2 |
| Broche 35 | RF1/AN6 — Port F bit 1 or ADC analog input 6 |
| Broche 36 | RF0/AN5 — Port F bit 0 or ADC analog input 5 |
| Broche 37 | VDD — Core logic supply, 2.0 V to 3.6 V |
| Broche 38 | VSS — Core ground |
| Broche 39 | RG7/SEG51 — Port G bit 7 or LCD segment 51 |
| Broche 40 | RG6/SEG52 — Port G bit 6 or LCD segment 52 |
| Broche 41 | RG5 — Port G bit 5 |
| Broche 42 | RG4 — Port G bit 4 |
| Broche 43 | RG3 — Port G bit 3 |
| Broche 44 | RG2 — Port G bit 2 |
| Broche 45 | RG1 — Port G bit 1 |
| Broche 46 | RG0 — Port G bit 0 |
| Broche 47 | RH7/CCP4 — Port H bit 7 or CCP4 PWM |
| Broche 48 | RH6/CCP3 — Port H bit 6 or CCP3 PWM |
| Broche 49 | RH5 — Port H bit 5 |
| Broche 50 | RH4 — Port H bit 4 |
| Broche 51 | RH3/AN9 — Port H bit 3 or ADC analog input 9 |
| Broche 52 | RH2/AN8 — Port H bit 2 or ADC analog input 8 |
| Broche 53 | RH1/AN7 — Port H bit 1 or ADC analog input 7 |
| Broche 54 | RH0/AN4 — Port H bit 0 or ADC analog input 4 |
| Broche 55 | VDDCORE — Core regulator output, do not drive externally |
| Broche 56 | VSS — Core ground |
| Broche 57 | RJ7 — Port J bit 7 |
| Broche 58 | RJ6 — Port J bit 6 |
| Broche 59 | RJ5 — Port J bit 5 |
| Broche 60 | RJ4 — Port J bit 4 |
| Broche 61 | RJ3 — Port J bit 3 |
| Broche 62 | RJ2 — Port J bit 2 |
| Broche 63 | RJ1 — Port J bit 1 |
| Broche 64 | RJ0 — Port J bit 0 |
| Broche 65 | RK7/CCP5 — Port K bit 7 or CCP5 PWM |
| Broche 66 | RK6/CCP6 — Port K bit 6 or CCP6 PWM |
| Broche 67 | RK5 — Port K bit 5 |
| Broche 68 | RK4 — Port K bit 4 |
| Broche 69 | RK3/AN19 — Port K bit 3 or ADC analog input 19 |
| Broche 70 | RK2/AN18 — Port K bit 2 or ADC analog input 18 |
| Broche 71 | RK1/AN17 — Port K bit 1 or ADC analog input 17 |
| Broche 72 | RK0/AN16 — Port K bit 0 or ADC analog input 16 |
| Broche 73 | RD7/SEG7 — Port D bit 7 or LCD segment 7 |
| Broche 74 | RD6/SEG6 — Port D bit 6 or LCD segment 6 |
| Broche 75 | RD5/SEG5 — Port D bit 5 or LCD segment 5 |
| Broche 76 | RD4/SEG4 — Port D bit 4 or LCD segment 4 |
| Broche 77 | RD3/SEG3 — Port D bit 3 or LCD segment 3 |
| Broche 78 | RD2/SEG2 — Port D bit 2 or LCD segment 2 |
| Broche 79 | RD1/SEG1 — Port D bit 1 or LCD segment 1 |
| Broche 80 | RD0/SEG0 — Port D bit 0 or LCD segment 0 |
| Broche 81 | RA7/OSC1 — Port A bit 7 or secondary oscillator input |
| Broche 82 | RA6/OSC2 — Port A bit 6 or secondary oscillator output |
| Broche 83 | RA5/AN4 — Port A bit 5 or ADC analog input 4 |
| Broche 84 | RA4/T0CKI — Port A bit 4 or Timer0 clock input |
| Broche 85 | AVDD — Analog supply for ADC, 2.0 V to 3.6 V |
| Broche 86 | AVSS — Analog ground for ADC |
| Broche 87 | RA3/AN3 — Port A bit 3 or ADC analog input 3 |
| Broche 88 | RA2/AN2 — Port A bit 2 or ADC analog input 2 |
| Broche 89 | RA1/AN1 — Port A bit 1 or ADC analog input 1 |
| Broche 90 | RA0/AN0 — Port A bit 0 or ADC analog input 0 |
| Broche 91 | D+ — USB D+ data line |
| Broche 92 | D- — USB D- data line |
| Broche 93 | VBUS — USB VBUS sensing input |
| Broche 94 | VUSB — USB internal transceiver supply, 3.3V typical |
| Broche 95 | RL0/SEG31 — Port L bit 0 or LCD segment 31 |
| Broche 96 | RL1/SEG32 — Port L bit 1 or LCD segment 32 |
| Broche 97 | RL2/SEG33 — Port L bit 2 or LCD segment 33 |
| Broche 98 | RL3/SEG34 — Port L bit 3 or LCD segment 34 |
| Broche 99 | RL4/SEG35 — Port L bit 4 or LCD segment 35 |
| Broche 100 | RL5/SEG36 — Port L bit 5 or LCD segment 36 |
Applications typiques
PIC18F95J94-I/PT convient pour 6 applications: USB Thermostat with Segmented LCD, Battery-Powered Blood Pressure Monitor, Industrial Segment-LCD Control Panel, Smart Sensor / e-Metering Front-End, USB HID Medical Input Device, USB Charging Cradle with Diagnostic LCD.
USB Thermostat with Segmented LCD
The PIC18F95J94-I/PT's combination of on-chip USB Full-Speed and a segmented LCD driver (up to 480 segments per the family datasheet) is purpose-built for USB-connected thermostats. Its 64MHz CPU provides enough throughput for USB HID stack plus a responsive UI update loop, and nanoWatt XLP technology keeps sleep current low so a thermostat can run for years on battery-backed power. Using the internal LCD charge pump eliminates the negative bias LDO normally needed for 3V LCDs, reducing BOM cost. Connect a USB-C receptacle directly to the D+/D- pins for HVAC service-port diagnostics. With 32KB code space it comfortably fits HVAC control logic plus a USB bootloader.
Recommandé
Battery-Powered Blood Pressure Monitor
Portable medical monitors like blood-pressure cuffs benefit from the PIC18F95J94-I/PT's nanoWatt XLP sleep mode (typical sleep current in the nanoamp range per Microchip XLP datasheets), integrated segmented LCD for the pressure/gauge display, and USB for charging/data. The MCU's 12-bit ADC combined with an analog pressure transducer provides the resolution needed for accurate systolic/diastolic readings, while the RTCC tracks time-of-day measurement history. A 32KB code budget covers the oscillometric algorithm and LCD UI without external memory, and the 100-pin TQFP gives plenty of GPIO for keypad, pump control and buzzer.
Recommandé
Industrial Segment-LCD Control Panel
Industrial control panels with multi-line segment displays need both LCD segment drive and a way to upload firmware or send diagnostics - the PIC18F95J94-I/PT provides both on-chip, plus 100 pins for digital I/O to interface with sensor arrays, relays and communication PHYs. The 2.0V-3.6V VDD range is ideal for 3.3V industrial backplanes. The 100-pin TQFP offers 84 I/O lines, sufficient to drive a 7-segment x 16-digit status display plus 32 GPIOs for HMI buttons, status outputs and an RS-485 transceiver. The same-die drop-in to PIC18F96J94-I/PT provides 64 KB code space for complex SCADA-style firmware without changing the PCB layout.
Recommandé
Smart Sensor / e-Metering Front-End
Electricity, water or gas meters with segmented LCDs and a USB diagnostic port are an ideal target for the PIC18F95J94-I/PT. Its 12-bit ADC, internal LCD segment driver, and USB Full-Speed peripheral enable a single-chip design that eliminates the usual separate LCD controller and USB interface IC. With nanoWatt XLP sleep currents in the nanoamp range, the MCU contributes negligible battery drain during the long sleep phases typical of metering applications, while the 64MHz CPU wakes in microseconds to take a measurement. The 100-pin TQFP gives generous analog-input multiplexing for voltage and current sensing.
Recommandé
USB HID Medical Input Device
Custom USB HID medical input devices such as measurement wands, glucose meters and physical-therapy controllers combine a button or touch interface, a small segment display, and USB - all features natively integrated in the PIC18F95J94-I/PT. The PIC18F95J94's on-chip USB peripheral supports HID, CDC and vendor classes, while the CTMU peripheral enables capacitive-touch buttons without external controller ICs. The internal segmented LCD driver displays measurement results without an external charge pump, reducing BOM to MCU + sensor + battery. 32 KB FLASH is sufficient for the USB stack plus a responsive UI.
Recommandé
USB Charging Cradle with Diagnostic LCD
Crade-style chargers that also display battery state, charge time, or diagnostic status via segmented LCD are a strong fit for the PIC18F95J94-I/PT. The MCU coordinates charge management (via MCP73831 or equivalent), reads battery voltage through its 12-bit ADC, drives a segmented LCD to show state-of-charge, and exposes a USB diagnostic port for service technicians. Industrial -40C to +85C temperature grade ensures operation in automotive and outdoor charging environments. The 32 KB FLASH is enough for charge-profiling algorithms and a UI; upgrade to PIC18F96J94-I/PT (64 KB) for smart-charge curve programming.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18F95J94-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18F96J94-I/PT | PIC18F97J94-I/PT | PIC18F95J94-I/PF | PIC18F95J94T-I/PT | PIC18F96J94-I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) - same | TQFP-100 (12x12 mm) - same | TQFP-100 (14x14 mm) | TQFP-100 (12x12 mm) - same | TQFP-100 (14x14 mm) |
| Program Memory (FLASH) | 32 KB | 64 KB | 128 KB | 32 KB | 32 KB | 64 KB |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| USB Peripheral | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed |
| LCD Segments | Up to 480 | Up to 480 | Up to 480 | Up to 480 | Up to 480 | Up to 480 |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
Principaux différenciateurs
- Largest FLASH memory in the family drop-in option (vs PIC18F96J94-I/PT)
- Larger TQFP body for hand-soldering and prototype work (vs PIC18F95J94-I/PF)
- Tape-and-reel packaging for SMD production lines (vs PIC18F95J94T-I/PT)
Notes de conception
The PIC18F95J94-I/PT operates from a single 2.0 V to 3.6 V VDD - the 'J' family is NOT 5V tolerant like older PIC18F 'K' parts. Use an MCP1700 low-IQ LDO to derive 3.3V from a USB VBUS or battery source. For battery applications, ensure the LDO's quiescent current is below the MCU's nanoWatt XLP sleep current (typically hundreds of nA) or the LDO becomes the dominant drain.
USB Full-Speed operation requires a 48 MHz system clock, normally derived from a 12 MHz or 24 MHz crystal through the internal PLL. A common pitfall is forgetting to configure the PLL configuration bits in the CONFIG1 register - the firmware will enumerate at low speed or fail to enumerate at all. Use MPLAB X IDE's Configuration Bits window to set PLL enable and divisor, and confirm with a USB analyzer.
Route USB D+/D- as a 90 ohm differential pair with matched impedance, and place the 33 ohm series damping resistors within 5mm of the MCU D+/D- pins. AVss must be tied to Vss at a single point near the MCU - separate analog and digital grounds but connect them at the MCU's AVss pin only. Place 100 nF decoupling on every VDD/VSS pair and a 10 uF bulk on the main VDD pin.
When using the segmented LCD driver, avoid running high-frequency digital traces parallel to the LCD segment lines, especially in COM-heavy areas. Use the LCD charge-pump mode (enabled via firmware) instead of relying on Vdd to derive VLCD - the internal charge pump provides stable VLCD even as battery discharges, which prevents LCD ghosting at low battery voltage. Add a 1uF X7R bypass cap on the VLCD pin.
Informations de conformité
RoHS and REACH compliant per Microchip product page; lead-free / halogen-free per Microchip packaging spec. AEC-Q100 not applicable for industrial-grade MCU - Microchip automotive parts use an -E or -V suffix with separate qualification.