PIC18LF8390-I/PT - 8-bit MCU, 8KB Flash, 768B RAM, 80-TQFP
Référence : PIC18LF8390-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.98 | $2,98 |
| 10 | $2.7 | $27,00 |
| 100 | $2.4 | $240,00 |
| 500 | $2.27 | $1 135,00 |
| 1 000 | $2.1 | $2 100,00 |
PIC18LF8390-I/PT Présentation
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash, peripherals, and I/O. The PIC18 family uses an enhanced RISC architecture with a 16-bit instruction word and 8-bit data path, sitting within the broader taxonomy of microcontroller -> embedded controller -> semiconductor IC. Compared with 32-bit ARM Cortex-M parts, the PIC18F prioritizes deterministic interrupt latency, low power, and ease of programming for cost-sensitive applications.
Key features include a 40 MHz internal oscillator, integrated ADC, multiple PWM and capture/compare modules, two USART modules, and an SPI/I2C peripheral set. The device supports ICD (In-Circuit Debug) via dedicated RB6/RB7 pins, enabling real-time emulation through MPLAB tools. The 80-pin TQFP package exposes extensive I/O, making it appropriate for human-machine interface (HMI) and motor-control designs.
The LF variant reduces core voltage to extend battery life in portable products, while the 40 MHz CPU delivers up to 10 MIPS, providing ample headroom for sensor fusion, LED control, and protocol bridging. The architecture also supports self-programming, allowing firmware updates in the field without external bootloaders.
Typical applications include industrial control panels, building automation, HVAC fan control, automotive body modules, and battery-powered instrumentation where the wide I/O count and low-voltage operation are decisive. When designing with this part, ensure decoupling capacitors (100nF + 10uF) are placed within 5 mm of the VDD pins, and follow Microchip AN585 and TB313 for oscillator and in-circuit debug layout guidance.
Alternatives de remplacement direct pour PIC18LF8390-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC18LF8390-I/PT (même facteur de forme et même empreinte) — différant par Package, Core Architecture, Operating Temperature, I/O Pins, ADC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC18LF6622-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC18LF6680-I/PT
✅ Remplacement direct✓ En stock
$12.85 / unité
Voir la fiche technique →PIC18LF8585-I/PT
✅ Remplacement direct✓ En stock
$6.2 / unité
Voir la fiche technique →PIC18LF6525-I/PT
✅ Remplacement direct✓ En stock
$6.2 / unité
Voir la fiche technique →PIC18LF6310-I/PT
✅ Remplacement direct✓ En stock
$5.32 / unité
Voir la fiche technique →PIC18LF8390-I/PT Valeurs maximales et caractéristiques électriques
| Product Family | PIC18F |
| Core | 8-bit PIC RISC |
| Program Memory | 8 KB Flash (4K x 16) |
| RAM | 768 bytes |
| Maximum CPU Frequency | 40 MHz |
| MIPS (peak) | 10 MIPS |
| Supply Voltage (LF) | 2.0 V to 3.6 V |
| I/O Pins | 66 |
| Boîtier | 80-TQFP (12x12 mm) |
| Température de fonctionnement | -40C to +85C |
| Type de montage | Surface Mount |
| Packing Media | Tray (119 pcs) |
| Lead Count | 80 |
| Statut RoHS | Compliant |
| Debug Interface | ICD (In-Circuit Debug) via RB6/RB7 |
Configuration des broches de PIC18LF8390-I/PT
| Broche 1 | OSC1/CLKIN — Oscillator input / external clock |
| Broche 2 | OSC2/CLKOUT — Oscillator output |
| Broche 3 | MCLR — Master clear reset (active-low) |
| Broche 4 | RA0 — PORTA bit 0 (analog/digital I/O) |
| Broche 5 | RA1 — PORTA bit 1 |
| Broche 6 | RA2 — PORTA bit 2 |
| Broche 7 | RA3 — PORTA bit 3 |
| Broche 8 | RA4 — PORTA bit 4 |
| Broche 9 | RA5 — PORTA bit 5 |
| Broche 10 | RA6 — PORTA bit 6 |
| Broche 11 | VSS — Ground |
| Broche 12 | VDD — Positive supply |
| Broche 13 | RB0 — PORTB bit 0 (external interrupt) |
| Broche 14 | RB1 — PORTB bit 1 |
| Broche 15 | RB2 — PORTB bit 2 |
| Broche 16 | RB3 — PORTB bit 3 |
| Broche 17 | RB4 — PORTB bit 4 |
| Broche 18 | RB5 — PORTB bit 5 |
| Broche 19 | RB6 — PORTB bit 6 (ICD PGC) |
| Broche 20 | RB7 — PORTB bit 7 (ICD PGD) |
| Broche 21 | RC0 — PORTC bit 0 |
| Broche 22 | RC1 — PORTC bit 1 |
| Broche 23 | RC2 — PORTC bit 2 |
| Broche 24 | RC3 — PORTC bit 3 |
| Broche 25 | RC4 — PORTC bit 4 |
| Broche 26 | RC5 — PORTC bit 5 |
| Broche 27 | RC6 — PORTC bit 6 (TX) |
| Broche 28 | RC7 — PORTC bit 7 (RX) |
| Broche 29 | RD0 — PORTD bit 0 |
| Broche 30 | RD1 — PORTD bit 1 |
| Broche 31 | RD2 — PORTD bit 2 |
| Broche 32 | RD3 — PORTD bit 3 |
| Broche 33 | RD4 — PORTD bit 4 |
| Broche 34 | RD5 — PORTD bit 5 |
| Broche 35 | RD6 — PORTD bit 6 |
| Broche 36 | RD7 — PORTD bit 7 |
| Broche 37 | VSS — Ground |
| Broche 38 | VDD — Positive supply |
| Broche 39 | RE0 — PORTE bit 0 |
| Broche 40 | RE1 — PORTE bit 1 |
| Broche 41 | RE2 — PORTE bit 2 |
| Broche 42 | RE3 — PORTE bit 3 |
| Broche 43 | RE4 — PORTE bit 4 |
| Broche 44 | RE5 — PORTE bit 5 |
| Broche 45 | RE6 — PORTE bit 6 |
| Broche 46 | RE7 — PORTE bit 7 |
| Broche 47 | RF0 — PORTF bit 0 |
| Broche 48 | RF1 — PORTF bit 1 |
| Broche 49 | RF2 — PORTF bit 2 |
| Broche 50 | RF3 — PORTF bit 3 |
| Broche 51 | RF4 — PORTF bit 4 |
| Broche 52 | RF5 — PORTF bit 5 |
| Broche 53 | RF6 — PORTF bit 6 |
| Broche 54 | RF7 — PORTF bit 7 |
| Broche 55 | RG0 — PORTG bit 0 |
| Broche 56 | RG1 — PORTG bit 1 |
| Broche 57 | RG2 — PORTG bit 2 |
| Broche 58 | RG3 — PORTG bit 3 |
| Broche 59 | RG4 — PORTG bit 4 |
| Broche 60 | AVSS — Analog ground |
| Broche 61 | AVDD — Analog positive supply |
| Broche 62 | RH0 — PORTH bit 0 |
| Broche 63 | RH1 — PORTH bit 1 |
| Broche 64 | RH2 — PORTH bit 2 |
| Broche 65 | RH3 — PORTH bit 3 |
| Broche 66 | RH4 — PORTH bit 4 |
| Broche 67 | RH5 — PORTH bit 5 |
| Broche 68 | RH6 — PORTH bit 6 |
| Broche 69 | RH7 — PORTH bit 7 |
| Broche 70 | RJ0 — PORTJ bit 0 |
| Broche 71 | RJ1 — PORTJ bit 1 |
| Broche 72 | RJ2 — PORTJ bit 2 |
| Broche 73 | RJ3 — PORTJ bit 3 |
| Broche 74 | RJ4 — PORTJ bit 4 |
| Broche 75 | RJ5 — PORTJ bit 5 |
| Broche 76 | RJ6 — PORTJ bit 6 |
| Broche 77 | RJ7 — PORTJ bit 7 |
| Broche 78 | VSS — Ground |
| Broche 79 | VDD — Positive supply |
| Broche 80 | NC — Not connected (per datasheet) |
Applications typiques
PIC18LF8390-I/PT convient pour 6 applications: Industrial Control Panel HMI, Battery-Powered HVAC Sensor Node, LED Lighting Controller, Automotive Body Module, Portable Medical Monitoring Device, Industrial Motor Control.
Industrial Control Panel HMI
The PIC18LF8390-I/PT's 66 I/O pins and 8 KB Flash make it ideal for industrial control panel HMIs with multiple LEDs, 7-segment displays, keypad matrix, and relay outputs. The 40 MHz CPU provides 10 MIPS throughput, sufficient for real-time scanning of 8x8 keypads (64 keys) and refresh of 16-digit multiplexed displays within the 20 ms human-perception threshold. Operating from 2.0V to 3.6V and the -40C to +85C industrial range ensure robust behavior on factory floors. Designers pair the MCU with a ULN2003A for relay drive and an HC595 for output expansion.
Recommandé
Battery-Powered HVAC Sensor Node
With 2.0V to 3.6V operation and integrated ADC, the PIC18LF8390-I/PT is well suited for battery-powered HVAC sensors that monitor temperature, humidity, and pressure over 5-10 year battery life. The 768-byte SRAM and 8 KB Flash accommodate small RTOS-less firmware loops. Designers configure the ADC for low-power duty cycling, sleeping the MCU between measurements. The 80-pin TQFP exposes enough I/O to interface a 4-line character LCD, multiple SPI sensors, and a 1-Wire interface without external bus expanders.
Recommandé
LED Lighting Controller
The PIC18LF8390-I/PT drives multi-channel LED lighting controllers via its multiple PWM and capture/compare modules, generating 8-bit or 10-bit PWM at up to 40 kHz for flicker-free dimming. The 66 I/O pins support driving 12-16 RGBW LED strings directly through MOSFET drivers, and the integrated ADC reads ambient light sensors for closed-loop brightness control. The wide LF voltage range lets the MCU share the LED driver's 3.3V rail without additional regulators.
Recommandé
Automotive Body Module
Inside automotive body modules (door controllers, seat controllers, mirror adjusters), the PIC18LF8390-I/PT handles LIN slave communication, motor PWM, and switch matrix scanning. Its -40C to +85C industrial temperature range covers cabin environments, while the 40 MHz core debounces switch contacts and runs LIN protocol stacks within microsecond budgets. Designers pair it with LIN transceivers like the TJA1027 and H-bridge drivers such as the MC33926 to drive seat and mirror motors.
Recommandé
Portable Medical Monitoring Device
For battery-powered medical monitoring (pulse oximeters, glucose meters, portable ECG), the PIC18LF8390-I/PT offers low-voltage LF operation down to 2.0V and 10 MIPS throughput for signal processing. The integrated ADC captures analog biosignals, while 768 bytes of SRAM buffer short data bursts before transmitting over UART to a host. The wide operating range and industrial temperature support use in ambulances, clinics, and home healthcare settings.
Recommandé
Industrial Motor Control
The PIC18LF8390-I/PT drives small industrial motors (fans, pumps, conveyor rollers) through its PWM and capture/compare peripherals, generating complementary PWM with programmable dead-time for safe half-bridge switching. The 40 MHz CPU executes FOC (field-oriented control) loops on small BLDC motors below 200 W, while the 66 I/O handle quadrature encoder inputs and Hall sensor feedback. Designers route motor current through Hall-effect sensors like the ACS712 into the on-chip ADC for closed-loop torque control.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC18LF8390-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC18LF6622-I/PT | PIC18LF6680-I/PT | PIC18LF8585-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-TQFP (12x12 mm) | 64-TQFP - PCB rework required | 80-TQFP - same | 80-TQFP - same |
| Program Flash | 8 KB | 64 KB | 16 KB | 48 KB |
| RAM | 768 B | 3.8 KB | 1.5 KB | 3.3 KB |
| Maximum Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Operating Voltage | 2.0 V to 3.6 V (LF) | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| I/O Pins | 66 | 54 | 66 | 66 |
| CAN Peripheral | No | Yes | Yes | No |
Principaux différenciateurs
- 66 I/O in LF low-voltage family (vs PIC18LF4520-I/PT)
- Low-voltage LF operation (vs PIC18F8390)
- Cost-optimized Flash density (vs PIC18LF6680-I/PT)
Notes de conception
Place a 100 nF decoupling capacitor within 5 mm of every VDD/AVDD pin, with a bulk 10 uF tantalum or ceramic capacitor at the board entry. Use separate analog (AVDD) and digital (VDD) supplies if the analog subsystem is active; otherwise tie AVDD to VDD through a ferrite bead to suppress switching noise from digital I/O.
The 80-pin TQFP has 0.5 mm pitch - use 4-layer PCB with continuous ground plane beneath the part to reduce EMI. Keep the MCLR pull-up (10 kOhm) close to the pin and route RB6/RB7 to dedicated ICD header pads for in-circuit debugging without disturbing the design.
Do not leave unused I/O pins floating - configure them as outputs low or inputs with internal weak pull-ups to avoid shoot-through current. The LF variant requires 2.0V minimum; powering below 2.0V can cause Flash read errors and ADC drift. Apply configuration bits carefully: WDT, BOR, and oscillator selection all affect boot reliability.
Informations de conformité
LF suffix denotes low-voltage lead-free process; RoHS compliant per Microchip product page. Industrial -40C to +85C temperature range only - not AEC-Q100 qualified.
