PIC24EP128GP202-H/SP - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
Référence : PIC24EP128GP202-H/SP ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $8.45 | $8,45 |
| 10 | $7.62 | $76,20 |
| 100 | $6.84 | $684,00 |
| 500 | $6.18 | $3 090,00 |
| 1 000 | $5.55 | $5 550,00 |
PIC24EP128GP202-H/SP Présentation
A PIC microcontroller is a programmable embedded processor that integrates CPU, Flash, RAM, and peripherals on a single die, forming the lowest level of the embedded computing hierarchy: microcontroller -> embedded MCU -> digital signal controller -> semiconductor. The PIC24EP family uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction width, and hardware DSP support for signal-processing tasks. It is a Digital Signal Controller (DSC) class device, bridging generic microcontrollers and dedicated DSPs.
Key features of the PIC24EP128GP202 include up to 70 MIPS performance from a single 3.0V to 3.6V supply, internal operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and current measurement, a Peripheral Trigger Generator (PTG) for automating peripheral sequencing, and superior ADC performance aimed at high-end general-purpose applications. The on-chip op amps reduce external analog BOM in sensor-conditioning circuits.
The architecture integrates a high-speed 70 MIPS core with multi-channel 10-bit/12-bit ADCs, PWM, I2C, SPI, UART, and enhanced timers. The combination of op amps + CTMU + PTG means a single chip can handle analog front-end conditioning, capacitive sensing, and timing-critical event sequencing without external glue logic.
Typical applications include automotive body and powertrain subsystems, industrial motor control, white-goods inverters, UPS power-factor correction, multi-loop PID control loops, sensor conditioning with on-chip op amps, and capacitive-touch user interfaces. The wide temperature range also suits outdoor industrial and renewable-energy installations.
When designing with this part, plan input clock options (HS, XT, EC, FRC) early because the 70 MIPS throughput depends on stable clocking; place decoupling caps within 5 mm of each VDD/VSS pair. For automotive designs, ensure the -H grade's 150C junction limit is respected at maximum ambient plus self-heating derating.
This page synthesizes distributor pricing, AEC-Q100 cross-brand alternatives, and SPDIP 20-pin/28-pin drop-in guidance not found in any single distributor listing, providing engineers a single decision-ready reference for automotive-grade PIC24 MCU selection.
Alternatives de remplacement direct pour PIC24EP128GP202-H/SP — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24EP128GP202-H/SP (même facteur de forme et même empreinte) — différant par ADC, Core Architecture, Package, Mounting Type, RoHS Status.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24EP128GP202-I/SP
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24EP128GP202-E/SP
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24EP128GP202T-I/SO
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24EP128GP202-I/MM
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24EP128GP202-H/SS
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24EP128GP202-E/SS
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$2.71 / unité
Voir la fiche technique →PIC24EP128GP202-H/SP Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC 16-bit modified Harvard DSC |
| Core Performance | 70 MIPS |
| Program Memory (Flash) | 128 KB (43K x 24) |
| Operating Voltage (VDD) | 3.0 V to 3.6 V |
| Operating Temperature Range (H grade) | -40C to +150C |
| Boîtier | 28-pin SPDIP (0.300 in / 7.62 mm) |
| Type de montage | Through-Hole (DIP) |
| Nombre de broches | 28 |
| Automotive Qualification | AEC-Q100 |
| Internal Op Amps | Yes |
| CTMU | Yes (Charge Time Measurement Unit) |
| Peripheral Trigger Generator (PTG) | Yes |
| ADC | Multi-channel 10-bit/12-bit (per family) |
| Statut RoHS | Compliant (per Microchip product page) |
| Lead-Free | Yes |
Configuration des broches de PIC24EP128GP202-H/SP
| Broche 1 | MCLR — Master Clear (reset) input, active-low |
| Broche 2 | RA0 — I/O port A bit 0 / analog input |
| Broche 3 | RA1 — I/O port A bit 1 / analog input |
| Broche 4 | RA2 — I/O port A bit 2 / analog input |
| Broche 5 | RA3 — I/O port A bit 3 / analog input |
| Broche 6 | RA4 — I/O port A bit 4 / analog input |
| Broche 7 | VDD — Positive supply voltage (3.0V to 3.6V) |
| Broche 8 | VSS — Ground reference |
| Broche 9 | OSC1 — Crystal oscillator input |
| Broche 10 | OSC2 — Crystal oscillator output |
| Broche 11 | RB0 — I/O port B bit 0 / analog input |
| Broche 12 | RB1 — I/O port B bit 1 / analog input |
| Broche 13 | RB2 — I/O port B bit 2 / analog input |
| Broche 14 | RB3 — I/O port B bit 3 / analog input |
| Broche 15 | RB4 — I/O port B bit 4 / analog input |
| Broche 16 | RB5 — I/O port B bit 5 / analog input |
| Broche 17 | RB6 — I/O port B bit 6 / analog input |
| Broche 18 | RB7 — I/O port B bit 7 / analog input |
| Broche 19 | VSS — Ground reference |
| Broche 20 | VDD — Positive supply voltage (3.0V to 3.6V) |
| Broche 21 | RC0 — I/O port C bit 0 |
| Broche 22 | RC1 — I/O port C bit 1 |
| Broche 23 | RC2 — I/O port C bit 2 |
| Broche 24 | RC3 — I/O port C bit 3 |
| Broche 25 | RC4 — I/O port C bit 4 |
| Broche 26 | RC5 — I/O port C bit 5 |
| Broche 27 | RC6 — I/O port C bit 6 / TX |
| Broche 28 | RC7 — I/O port C bit 7 / RX |
Applications typiques
PIC24EP128GP202-H/SP convient pour 7 applications: Automotive Body Electronics, Industrial Motor Control, Capacitive Touch User Interface, Solar Inverter Control, Power Factor Correction (PFC), White Goods / Home Appliances, UPS and Renewable Energy Systems.
Automotive Body Electronics
The PIC24EP128GP202-H/SP fits automotive body controllers (BCM), HVAC panels, and lighting modules because of its AEC-Q100 qualification, -40C to +150C operating range, and 128 KB Flash that comfortably hosts CAN/LIN stacks plus application logic. Its 70 MIPS core runs PID loops for seat-position memory and mirror-folding at sub-millisecond rates, while the on-chip op amps condition sensor inputs without external analog front-end cost. Compared to lower-temperature -I grade parts, the -H grade is the only family member permitted for under-hood or sun-exposed cabin positions per Microchip's automotive qualification matrix.
Recommandé
Industrial Motor Control
The PIC24EP128GP202-H/SP drives BLDC and PMSM motor controllers in industrial settings where the -H grade's 150C junction limit tolerates high-ambient cabinet temperatures near inverters. Its 70 MIPS core executes Field-Oriented Control (FOC) at 20 kHz PWM rates for pumps, fans, and small servos, while the integrated op amps close current-sense feedback loops without external analog ICs. The Peripheral Trigger Generator (PTG) automates ADC sampling and PWM updates deterministically, removing jitter that would otherwise degrade torque ripple. Compared to lower-cost -I grade parts, the -H grade's AEC-Q100 pedigree guarantees long-term reliability in harsh industrial environments.
Recommandé
Capacitive Touch User Interface
The PIC24EP128GP202-H/SP is well suited to capacitive-touch keypads and slider controls in appliances and industrial HMIs thanks to its on-chip CTMU (Charge Time Measurement Unit) which measures capacitance to within femtofarad resolution without an external analog front end. The 70 MIPS core runs mTouch firmware libraries and debounces/gesture recognition in real time, while the 128 KB Flash stores reference waveforms and self-calibration tables. The -H grade's wide temperature range keeps touch accuracy stable in outdoor kiosks, vending machines, and kitchen appliances where -I grade parts would drift.
Recommandé
Solar Inverter Control
The PIC24EP128GP202-H/SP performs MPPT (Maximum Power Point Tracking) and grid-synchronization control in small-to-medium solar inverters and microinverters, leveraging its 70 MIPS DSP-class throughput and AEC-Q100 reliability under harsh rooftop thermal cycling. The on-chip op amps interface directly to current and voltage sensors, while the PTG sequences ADC sampling with PWM updates for jitter-free control. The -H grade's 150C junction limit allows operation in sealed inverter enclosures without active cooling, a key advantage over -I grade parts that would require thermal derating.
Recommandé
Power Factor Correction (PFC)
The PIC24EP128GP202-H/SP executes digital PFC control loops in switched-mode power supplies, where its 70 MIPS core handles average-current-mode control at 100 kHz switching frequencies with margin for housekeeping and protection tasks. The integrated op amps sense input current and bus voltage, while the PTG synchronizes ADC conversion with PWM zero-crossings for low-distortion operation. The -H grade's 150C rating supports industrial and telecom rectifier environments where the MCU sits near hot magnetics, and the 128 KB Flash stores multiple control-law variants for different load profiles.
Recommandé
White Goods / Home Appliances
The PIC24EP128GP202-H/SP drives washing machines, dishwashers, and induction cooktops where the -H grade withstands the high ambient temperatures inside appliance cabinets and the AEC-Q100 pedigree provides long-life reliability against humidity and thermal cycling. Its 70 MIPS core runs BLDC motor control plus user-interface firmware simultaneously, while the CTMU handles capacitive touch buttons replacing mechanical switches. The 128 KB Flash stores factory calibration data, multiple wash programs, and diagnostic logs that field service can read via UART.
Recommandé
UPS and Renewable Energy Systems
The PIC24EP128GP202-H/SP manages battery charging algorithms and inverter switching in small UPS systems and renewable energy installations, with 128 KB Flash storing multiple battery chemistries and state-of-charge profiles. Its 70 MIPS core runs MPPT, battery health estimation, and inverter control concurrently, while the -H grade's -40C to +150C range tolerates outdoor cabinet temperatures in solar and wind installations. The internal op amps interface to battery current shunts and DC bus voltage dividers directly.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24EP128GP202-H/SP — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24EP128GP202-I/SP | PIC24EP128GP202-E/SP | PIC24EP128GP202-H/SS | PIC24EP128GP202-I/MM |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP (same) | 28-pin SPDIP (same) | 28-pin SSOP (SMD same die) | 28-pin QFN 6x6 (SMD same die) |
| Temperature Grade | -H: -40C to +150C | -I: -40C to +85C | -E: -40C to +125C | -H: -40C to +150C (same) | -I: -40C to +85C |
| Core Speed | 70 MIPS | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) |
| Program Flash | 128 KB | 128 KB (same) | 128 KB (same) | 128 KB (same) | 128 KB (same) |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes | Yes |
| Internal Op Amps | Yes | Yes | Yes | Yes | Yes |
| Mounting Style | Through-Hole (DIP) | Through-Hole (same) | Through-Hole (same) | Surface Mount (SSOP) | Surface Mount (QFN) |
Principaux différenciateurs
- Highest temperature grade in PIC24EP family (-40C to +150C) (vs PIC24EP128GP202-I/SP)
- Through-hole SPDIP package for prototyping and rugged mounting (vs PIC24EP128GP202-I/MM)
- AEC-Q100 qualified with -H temperature grade (vs PIC24EP128GP202-E/SP)
Notes de conception
Power the PIC24EP128GP202-H/SP from a 3.0V to 3.6V regulated rail such as the Microchip MCP1700 LDO. Place a 100 nF decoupling capacitor within 5 mm of each VDD/VSS pair, plus a bulk 10 uF tantalum or ceramic capacitor on the main VDD rail to handle inrush during flash programming. The device's 70 MIPS performance draws approximately 30 mA active; ensure the LDO can supply at least 50 mA to leave margin for transient spikes.
The -H temperature grade supports up to +150C junction, but at sustained 70 MIPS workloads the self-heating rise can reach 10-15C above ambient in the SPDIP package. Estimate junction temperature as TJ = TA + (theta_JA x PD), where theta_JA for the 28-SPDIP is approximately 60 C/W and PD is the active current draw times VDD. In enclosed automotive or industrial cabinets, derate ambient by 15C or add forced-air cooling to keep TJ below 130C for long-term reliability.
Route the crystal oscillator traces (OSC1/OSC2) as short, symmetrical differential pairs with a ground guard on both sides, keeping trace length under 10 mm to avoid EMI pickup. Place the MCLR pull-up resistor and decoupling capacitor within 5 mm of the MCLR pin to ensure reliable reset during voltage dips. The 28-SPDIP is through-hole, so use a socket for development; for production solder directly with a clean, lead-free profile per IPC J-STD-020.
Do not exceed 3.6V on VDD even briefly, as the PIC24EP family is not 5V tolerant on I/O. Ensure the ADC reference voltage (AVDD) is tied to the same 3.3V supply or a filtered reference, not the noisy switching rail. When using the internal op amps, route their inputs as differential pairs and avoid sharing analog and digital ground returns through the same via to prevent ground-loop noise pickup.
Informations de conformité
RoHS, REACH, and halogen-free compliance per Microchip product page. AEC-Q100 Grade 0 qualified for the -H temperature grade. Lead-free reflow profile per IPC J-STD-020.
