PIC24FJ192GA108T-I/PT - 192KB Flash 16-bit MCU 80-TQFP | Microchip
Référence : PIC24FJ192GA108T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $8.86 | $8,86 |
| 10 | $7.97 | $79,70 |
| 100 | $7.08 | $708,00 |
| 500 | $6.21 | $3 105,00 |
| 1 000 | $5.42 | $5 420,00 |
PIC24FJ192GA108T-I/PT Présentation
What is a PIC24F microcontroller? A PIC24F is a 16-bit RISC microcontroller from Microchip that sits in the hierarchy: microcontroller (MCU) -> 16-bit MCU -> flash MCU -> low-power MCU -> PIC24F family. It is the lower-power complement to the dsPIC/PIC24H line, and is engineered for battery-friendly applications where 8-bit PICs lack memory or peripheral bandwidth but the system does not need a DSP engine. The 'F' suffix denotes Flash program memory and the 'J' denotes the nanoWatt XLP-style ultra-low-power process.
Key features include 192 KB self-reprogrammable flash, 16 KB SRAM, an operating voltage range of 2.0 V to 3.6 V with 5.5 V tolerant digital inputs, three I2C, three SPI, four UART, and 23 independent timers. The device supports multiple power management modes (Sleep, Idle, Doze) with fast wake-up, configurable open-drain outputs, and high-current 18 mA sink/source capability on every I/O pin. It also integrates a Parallel Master Port (PMP) for off-chip memory or graphics expansion.
Architecturally, the PIC24FJ192GA108T-I/PT uses a modified Harvard architecture with a 16-bit datapath and 24-bit instruction word. The CIP (Core Independent Peripherals) approach allows hardware state machines to handle timing-sensitive tasks without CPU intervention, reducing active time and current draw. The 32 MHz core delivers 16 MIPS of throughput while operating from as low as 2.0 V.
Typical applications include industrial control and HMI panels, portable medical instrumentation, low-power sensor hubs, USB and serial gateway bridges, and battery-backed telemetry devices. The 16 KB RAM buffer is particularly useful for protocol stacks and audio sample buffering in DSP-lite workloads.
Designers should pay attention to the 2.0-3.6 V supply constraint and avoid 5 V system buses unless using the 5.5 V tolerant digital inputs. Decoupling requires at least one 100 nF ceramic capacitor per VDD/VSS pair plus a bulk 10 µF near the ICSP programming header. For firmware development, MPLAB X IDE with the XC16 compiler is the standard toolchain.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not consolidated on the manufacturer datasheet alone - useful for engineers evaluating long-term availability and second-source options for industrial programs.
Alternatives de remplacement direct pour PIC24FJ192GA108T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FJ192GA108T-I/PT (même facteur de forme et même empreinte) — différant par Package, ADC, Core Architecture, Standby Current, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24FJ192GB108T-I/PT
✅ Remplacement direct✓ En stock
$5.1 / unité
Voir la fiche technique →PIC24FJ192GA108-I/PT
✅ Remplacement direct✓ En stock
$4.91 / unité
Voir la fiche technique →PIC24FJ192GA108T-E/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24FJ128GA108T-I/PT
✅ Remplacement direct✓ En stock
$4.45 / unité
Voir la fiche technique →PIC24FJ192GA106T-I/PT
✅ Remplacement direct✓ En stock
$4.12 / unité
Voir la fiche technique →PIC24FJ192GA108T-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC 16-bit RISC |
| Family | PIC24FJ192GA108 |
| Core Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory (Flash) | 192 KB (65.5K x 24 words) |
| RAM | 16 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| Digital Input Tolerance | 5.5 V tolerant (digital pins only) |
| I/O Sink/Source Current | 18 mA / 18 mA |
| I2C Interfaces | 3 |
| SPI Interfaces | 3 |
| UART Interfaces | 4 |
| Timers (16-bit) | 23 independent |
| Parallel Master Port (PMP) | Yes |
| Standby Current | <100 nA (typical) |
| Power Management Modes | Sleep, Idle, Doze |
| Boîtier | 80-pin TQFP (12x12 mm) |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +85C (Industrial) |
| Niveau MSL | 3 |
| Statut RoHS | Compliant |
Configuration des broches de PIC24FJ192GA108T-I/PT
| Broche 1 | RE0 — Port E bit 0 (I/O) |
| Broche 2 | RE1 — Port E bit 1 (I/O) |
| Broche 3 | RE2 — Port E bit 2 (I/O) |
| Broche 4 | RE3 — Port E bit 3 (I/O) |
| Broche 5 | RE4 — Port E bit 4 (I/O) |
| Broche 6 | RE5 — Port E bit 5 (I/O) |
| Broche 7 | MCLR — Master Clear (reset, active low) |
| Broche 8 | RA0 — Port A bit 0 (I/O) |
| Broche 9 | RA1 — Port A bit 1 (I/O) |
| Broche 10 | RA2 — Port A bit 2 (I/O) |
| Broche 11 | VDD — Positive supply voltage (2.0 V to 3.6 V) |
| Broche 12 | VSS — Ground reference |
| Broche 13 | RA3 — Port A bit 3 (I/O) |
| Broche 14 | RA4 — Port A bit 4 (I/O) |
| Broche 15 | RA5 — Port A bit 5 (I/O) |
| Broche 16 | RA6 — Port A bit 6 (I/O) |
| Broche 17 | RA7 — Port A bit 7 (I/O) |
| Broche 18 | RB0 — Port B bit 0 (I/O) |
| Broche 19 | RB1 — Port B bit 1 (I/O) |
| Broche 20 | RB2 — Port B bit 2 (I/O) |
| Broche 21 | RB3 — Port B bit 3 (I/O) |
| Broche 22 | RB4 — Port B bit 4 (I/O) |
| Broche 23 | RB5 — Port B bit 5 (I/O) |
| Broche 24 | RB6 — Port B bit 6 (I/O, ICSPCLK programming) |
| Broche 25 | RB7 — Port B bit 7 (I/O, ICSPDAT programming) |
| Broche 26 | RB8 — Port B bit 8 (I/O) |
| Broche 27 | RB9 — Port B bit 9 (I/O) |
| Broche 28 | RB10 — Port B bit 10 (I/O) |
| Broche 29 | RB11 — Port B bit 11 (I/O) |
| Broche 30 | RB12 — Port B bit 12 (I/O) |
| Broche 31 | RB13 — Port B bit 13 (I/O) |
| Broche 32 | VDD — Positive supply voltage |
| Broche 33 | VSS — Ground reference |
| Broche 34 | RB14 — Port B bit 14 (I/O) |
| Broche 35 | RB15 — Port B bit 15 (I/O) |
| Broche 36 | RC0 — Port C bit 0 (I/O) |
| Broche 37 | RC1 — Port C bit 1 (I/O) |
| Broche 38 | RC2 — Port C bit 2 (I/O) |
| Broche 39 | RC3 — Port C bit 3 (I/O) |
| Broche 40 | RC4 — Port C bit 4 (I/O) |
| Broche 41 | RC5 — Port C bit 5 (I/O) |
| Broche 42 | RC6 — Port C bit 6 (I/O) |
| Broche 43 | RC7 — Port C bit 7 (I/O) |
| Broche 44 | RC8 — Port C bit 8 (I/O) |
| Broche 45 | RC9 — Port C bit 9 (I/O) |
| Broche 46 | RC10 — Port C bit 10 (I/O) |
| Broche 47 | RC11 — Port C bit 11 (I/O) |
| Broche 48 | RC12 — Port C bit 12 (I/O) |
| Broche 49 | RC13 — Port C bit 13 (I/O) |
| Broche 50 | RC14 — Port C bit 14 (I/O) |
| Broche 51 | RC15 — Port C bit 15 (I/O) |
| Broche 52 | RD0 — Port D bit 0 (I/O) |
| Broche 53 | RD1 — Port D bit 1 (I/O) |
| Broche 54 | VDD — Positive supply voltage |
| Broche 55 | VSS — Ground reference |
| Broche 56 | RD2 — Port D bit 2 (I/O) |
| Broche 57 | RD3 — Port D bit 3 (I/O) |
| Broche 58 | RD4 — Port D bit 4 (I/O) |
| Broche 59 | RD5 — Port D bit 5 (I/O) |
| Broche 60 | RD6 — Port D bit 6 (I/O) |
| Broche 61 | RD7 — Port D bit 7 (I/O) |
| Broche 62 | RD8 — Port D bit 8 (I/O) |
| Broche 63 | RD9 — Port D bit 9 (I/O) |
| Broche 64 | RD10 — Port D bit 10 (I/O) |
| Broche 65 | RD11 — Port D bit 11 (I/O) |
| Broche 66 | RD12 — Port D bit 12 (I/O) |
| Broche 67 | RD13 — Port D bit 13 (I/O) |
| Broche 68 | RD14 — Port D bit 14 (I/O) |
| Broche 69 | RD15 — Port D bit 15 (I/O) |
| Broche 70 | RF0 — Port F bit 0 (I/O) |
| Broche 71 | RF1 — Port F bit 1 (I/O) |
| Broche 72 | RF2 — Port F bit 2 (I/O) |
| Broche 73 | RF3 — Port F bit 3 (I/O) |
| Broche 74 | RF4 — Port F bit 4 (I/O) |
| Broche 75 | RF5 — Port F bit 5 (I/O) |
| Broche 76 | VDD — Positive supply voltage |
| Broche 77 | VSS — Ground reference |
| Broche 78 | RF6 — Port F bit 6 (I/O) |
| Broche 79 | RF7 — Port F bit 7 (I/O) |
| Broche 80 | RF8 — Port F bit 8 (I/O) |
Applications typiques
PIC24FJ192GA108T-I/PT convient pour 6 applications: Industrial HMI Control Panels, Portable Medical Instrumentation, Battery-Backed Sensor Hubs, Serial Protocol Bridges and Gateways, Automotive Body and Comfort Modules, Consumer Audio and Display Peripherals.
Industrial HMI Control Panels
The PIC24FJ192GA108T-I/PT's 192 KB Flash and 16 KB RAM comfortably host full graphical HMI state machines, while the Parallel Master Port interfaces directly to TFT LCD drivers or external SRAM for framebuffering. Its four UART channels support simultaneous RS-232/RS-485 field-bus links, and three SPI buses drive digital potentiometers, DACs, and isolated comms. Industrial-grade -40C to +85C operation suits factory floor deployment without extra thermal hardening.
Recommandé
Portable Medical Instrumentation
Sub-100 nA standby and fast wake-up Sleep/Idle modes let the PIC24FJ192GA108T-I/PT run on coin-cell or Li-ion packs for pulse oximeters, glucose meters, and bedside monitors. The 16 KB RAM holds raw sensor sample buffers, while the 18 mA I/O drive directly energizes LED arrays, piezo buzzers, and segmented LCDs. Five-volt-tolerant digital inputs simplify interfacing with legacy hospital bus transceivers without level shifters.
Recommandé
Battery-Backed Sensor Hubs
The PIC24FJ192GA108T-I/PT is ideal for wireless sensor hubs aggregating data from multiple SPI or I2C sensor chains. Its 32 MHz throughput and DMA-driven peripherals can sample multi-axis IMUs, environmental sensors, and gas sensors concurrently while leaving CPU bandwidth for stack processing. The 192 KB Flash hosts full 6LoWPAN or BLE HCI host code, and 5.5 V tolerant inputs ease integration with industrial 5 V sensor rails.
Recommandé
Serial Protocol Bridges and Gateways
Three I2C, three SPI, and four UART channels let the PIC24FJ192GA108T-I/PT act as a multi-protocol bridge between Modbus RTU, I2C sensor clusters, SPI displays, and Ethernet or cellular modems. The 16 KB RAM supports protocol translation buffers, while the 32 MHz core runs Modbus, MQTT-SN, and proprietary protocols in parallel. CIP (Core Independent Peripherals) handle UART framing and CRC without CPU load.
Recommandé
Automotive Body and Comfort Modules
Although not AEC-Q100 qualified, the PIC24FJ192GA108T-I/PT's industrial -40C to +85C range and CIP peripherals are used in non-safety body modules such as seat controllers, mirror adjusters, and ambient lighting. The 18 mA I/O drive directly powers LED drivers and small relays, while three SPI buses drive CAN-transceiver-equipped peripherals. For AEC-Q100 requirements, designers migrate to the PIC24HJ or dsPIC33 families.
Recommandé
Consumer Audio and Display Peripherals
The PIC24FJ192GA108T-I/PT's high-current 18 mA I/O lines can source LED strings and segmented LCD bias rails directly, while the three SPI ports drive audio DACs, AMOLED controllers, and SD cards. 16 KB RAM buffers audio sample frames for software codecs, and the 32 MHz core handles UI rendering with a small TFT. The PMP (Parallel Master Port) interfaces to 8/16-bit parallel LCDs without external glue logic.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FJ192GA108T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FJ192GB108T-I/PT | PIC24FJ192GA108-I/PT | PIC24FJ192GA108T-E/PT | PIC24FJ128GA108T-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin TQFP (12x12 mm) | 80-pin TQFP - same | 80-pin TQFP - same | 80-pin TQFP - same | 80-pin TQFP - same |
| Core Architecture | PIC24F 16-bit RISC | PIC24F 16-bit RISC | PIC24F 16-bit RISC | PIC24F 16-bit RISC | PIC24F 16-bit RISC |
| Core Frequency | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| Flash Memory | 192 KB | 192 KB | 192 KB | 192 KB | 128 KB (-33%) |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| USB Peripheral | None | USB 2.0 OTG | None | None | None |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C (extended) | -40C to +85C |
Principaux différenciateurs
- Best balance of Flash density and RAM in 80-pin TQFP PIC24F family (vs PIC24FJ128GA108T-I/PT)
- Non-USB variant avoids USB peripheral overhead (vs PIC24FJ192GB108T-I/PT)
- Industrial temperature grade with extended variant option (vs PIC24FJ192GA108T-E/PT)
Notes de conception
The PIC24FJ192GA108T-I/PT requires four VDD/VSS pairs (pins 11/12, 32/33, 54/55, 76/77) properly decoupled with 100 nF X7R ceramic capacitors placed within 3 mm of each pair. Add a bulk 10 uF tantalum or ceramic capacitor near the ICSP programming header to suppress inrush during flash programming. The 2.0 V to 3.6 V supply must remain within tolerance during Sleep-mode wake-up transients, where the FRC stabilizes within 10 us.
Do not apply voltages above 3.6 V to VDD even though digital inputs tolerate 5.5 V. A common mistake is powering the MCU from a 3.3 V LDO and switching 5 V signal lines - this works for inputs but the absolute maximum on any analog pin (AVDD) is still 3.6 V. Use the ADC only with 0 to VDD analog rails, and configure the band-gap reference selection carefully if using external VREF+.
Route the ICSP pins (RB6/ICSPCLK and RB7/ICSPDAt) as a dedicated 2-wire bus with no series resistors above 100 ohm and keep traces under 50 mm to ensure reliable in-circuit programming. Avoid routing high-speed signals under the MCU's exposed pad (note: TQFP-80 has no EP, but DQFN variants do). The 80-pin TQFP allows 0.5 mm pitch routing on a 4-layer board with 4 mil traces and 4 mil spacing.
Informations de conformité
RoHS compliant per Microchip product page; lead-free TQFP package. Not AEC-Q100 qualified - use dsPIC33 or PIC24HJ AEC-Q100 variants for automotive.