PIC24FJ96GA010T-I/PT - 16-bit MCU, 96KB Flash, 100-TQFP | Microchip
Référence : PIC24FJ96GA010T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $5.62 | $5,62 |
| 10 | $5.05 | $50,50 |
| 100 | $4.49 | $449,00 |
| 500 | $3.92 | $1 960,00 |
| 1 000 | $3.46 | $3 460,00 |
PIC24FJ96GA010T-I/PT Présentation
A 16-bit PIC microcontroller (MCU) is a microcontroller built around a 16-bit data path and instruction word, offering roughly twice the throughput and code density of common 8-bit MCUs while remaining simpler and more deterministic than 32-bit Cortex-M parts. Within the Microchip taxonomy, PIC24F devices sit in the PIC24 family (16-bit), targeting low-power general-purpose and consumer applications with rich peripheral integration including USB, RTCC, and 10/12-bit ADC. PIC MCUs fit into the broader hierarchy: microcontroller -> embedded MCU -> semiconductor -> integrated circuit.
Key features of this part include 16 MIPS CPU throughput at 32 MHz, 96 KB self-programmable Flash, 8 KB RAM, an enhanced parallel master/slave port (PMP/PSP), multiple UART/SPI/I2C interfaces, a 16-channel 10-bit ADC, and five 16-bit timers. The PIC24FJ96GA010 is a general-purpose member of the GA010 subgroup and supports Microchip's standard development ecosystem including MPLAB X IDE, MPLAB XC16 compiler, and PICkit programmers.
Architecturally, the PIC24FJ core uses a 24-bit instruction word with a 16-bit data path, Harvard-style bus architecture, and a vectored interrupt controller with configurable priorities. The wide Flash and RAM resources, combined with the PMP peripheral, make the GA010 sub-family suitable for graphical LCD, USB, and external memory interfaces in 100-pin designs.
Typical applications include industrial control panels, building automation, USB peripherals, HVAC controllers, consumer appliances, and graphical HMI systems. The 100-pin footprint supports the larger I/O count required by these use cases. This part is well-suited to designs needing the larger code space and rich peripherals of the GA010 group without the analog-intensive features of later FJ-GA1xx families.
When designing with this device, ensure VDD decoupling is robust (typically 10 uF bulk + 100 nF per pin pair), reference the family datasheet's I/O multiplexing tables for alternate pin functions, and confirm the JTAG/ICSP programming connections match your in-circuit programmer layout. Code density on PIC24 is approximately 1.4x-2x that of PIC18, simplifying migration from 8-bit designs.
This page synthesizes distributor pricing, drop-in alternatives from the same PIC24FJ GA010/GA006 family, and practical design notes drawn from Microchip's family datasheet - information not consolidated on any single distributor page.
Alternatives de remplacement direct pour PIC24FJ96GA010T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FJ96GA010T-I/PT (même facteur de forme et même empreinte) — différant par Package, Maximum CPU Speed, Program Memory (Flash), ADC, Timers.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24FJ96GA010-I/PT
✅ Remplacement direct✓ En stock
$5.45 / unité
Voir la fiche technique →PIC24FJ128GA010-I/PT
✅ Remplacement direct✓ En stock
$4.95 / unité
Voir la fiche technique →PIC24FJ64GA010-I/PT
✅ Remplacement direct✓ En stock
$4.63 / unité
Voir la fiche technique →PIC24FJ96GA006-I/MR
✅ Remplacement direct✓ En stock
$2.78 / unité
Voir la fiche technique →PIC24FJ96GA010T-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | PIC24F 16-bit |
| Program Memory (Flash) | 96 KB |
| Data Memory (RAM) | 8 KB |
| CPU Performance | 16 MIPS |
| Operating Frequency | Up to 32 MHz (8 MHz internal with 4x PLL) |
| Operating Voltage Range | 2.0 V to 3.6 V |
| Nombre de broches | 100 |
| Boîtier | 100-pin TQFP (PT) |
| Type de montage | Surface Mount |
| I/O Pins | Up to 85 (typical for 100-pin GA010) |
| ADC | 10-bit, up to 16 channels |
| Timers | 5 x 16-bit |
| Communication Interfaces | UART, SPI, I2C |
| Parallel Port | Enhanced PMP/PSP |
| Plage de température de fonctionnement | -40C to +85C (industrial, -I) |
| Niveau MSL | 3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant |
Configuration des broches de PIC24FJ96GA010T-I/PT
| Broche 1 | RG15 — I/O pin / port G bit 15 |
| Broche 2 | VDD — Positive supply voltage (2.0V-3.6V) |
| Broche 3 | RG0 — I/O pin / port G bit 0 |
| Broche 4 | RG1 — I/O pin / port G bit 1 |
| Broche 5 | RG2 — I/O pin / port G bit 2 |
| Broche 6 | RG3 — I/O pin / port G bit 3 |
| Broche 7 | RF13 — I/O pin / port F bit 13 |
| Broche 8 | RF12 — I/O pin / port F bit 12 |
| Broche 9 | VDD — Positive supply voltage (2.0V-3.6V) |
| Broche 10 | VSS — Ground reference |
| Broche 11 | RF5 — I/O pin / port F bit 5 / USBID |
| Broche 12 | RF4 — I/O pin / port F bit 4 / USBVBUS |
| Broche 13 | RD15 — I/O pin / port D bit 15 |
| Broche 14 | RD14 — I/O pin / port D bit 14 |
| Broche 15 | RD13 — I/O pin / port D bit 13 |
| Broche 16 | RD12 — I/O pin / port D bit 12 |
| Broche 17 | RD11 — I/O pin / port D bit 11 / PSP |
| Broche 18 | RD10 — I/O pin / port D bit 10 / PSP |
| Broche 19 | RD9 — I/O pin / port D bit 9 / PSP |
| Broche 20 | RD8 — I/O pin / port D bit 8 / PSP |
| Broche 21 | RD7 — I/O pin / port D bit 7 / PSP |
| Broche 22 | RD6 — I/O pin / port D bit 6 / PSP |
| Broche 23 | RD5 — I/O pin / port D bit 5 / PMP |
| Broche 24 | RD4 — I/O pin / port D bit 4 / PMP |
| Broche 25 | RD3 — I/O pin / port D bit 3 / PMP |
| Broche 26 | RD2 — I/O pin / port D bit 2 / PMP |
| Broche 27 | RD1 — I/O pin / port D bit 1 / PMP |
| Broche 28 | RD0 — I/O pin / port D bit 0 / PMP |
| Broche 29 | VSS — Ground reference |
| Broche 30 | OSC1/CLKI/RC12 — Oscillator crystal input / external clock |
| Broche 31 | OSC2/CLKO/RC15 — Oscillator crystal output / clock out |
| Broche 32 | RC13/SOSCI — I/O pin / secondary oscillator input |
| Broche 33 | RC14/SOSCO — I/O pin / secondary oscillator output |
| Broche 34 | RA14 — I/O pin / port A bit 14 |
| Broche 35 | RA15 — I/O pin / port A bit 15 |
| Broche 36 | RA0 — I/O pin / port A bit 0 |
| Broche 37 | RA1 — I/O pin / port A bit 1 |
| Broche 38 | RA2 — I/O pin / port A bit 2 |
| Broche 39 | RA3 — I/O pin / port A bit 3 |
| Broche 40 | RA4 — I/O pin / port A bit 4 |
| Broche 41 | RA5 — I/O pin / port A bit 5 |
| Broche 42 | RA6 — I/O pin / port A bit 6 |
| Broche 43 | RA7 — I/O pin / port A bit 7 |
| Broche 44 | VSS — Ground reference |
| Broche 45 | VDD — Positive supply voltage (2.0V-3.6V) |
| Broche 46 | RB0 — I/O pin / port B bit 0 / PGED1 |
| Broche 47 | RB1 — I/O pin / port B bit 1 / PGEC1 |
| Broche 48 | RB2 — I/O pin / port B bit 2 |
| Broche 49 | RB3 — I/O pin / port B bit 3 |
| Broche 50 | RB4 — I/O pin / port B bit 4 |
| Broche 51 | RB5 — I/O pin / port B bit 5 |
| Broche 52 | RB6 — I/O pin / port B bit 6 |
| Broche 53 | RB7 — I/O pin / port B bit 7 |
| Broche 54 | RB8 — I/O pin / port B bit 8 |
| Broche 55 | RB9 — I/O pin / port B bit 9 |
| Broche 56 | RB11 — I/O pin / port B bit 11 |
| Broche 57 | RB12 — I/O pin / port B bit 12 |
| Broche 58 | RB13 — I/O pin / port B bit 13 |
| Broche 59 | RB14 — I/O pin / port B bit 14 |
| Broche 60 | RB15 — I/O pin / port B bit 15 |
| Broche 61 | VSS — Ground reference |
| Broche 62 | VDD — Positive supply voltage (2.0V-3.6V) |
| Broche 63 | RC1 — I/O pin / port C bit 1 |
| Broche 64 | RC2 — I/O pin / port C bit 2 |
| Broche 65 | RC3 — I/O pin / port C bit 3 |
| Broche 66 | RC4 — I/O pin / port C bit 4 |
| Broche 67 | RG6 — I/O pin / port G bit 6 |
| Broche 68 | RG7 — I/O pin / port G bit 7 |
| Broche 69 | RG8 — I/O pin / port G bit 8 |
| Broche 70 | RG9 — I/O pin / port G bit 9 |
| Broche 71 | RA8 — I/O pin / port A bit 8 |
| Broche 72 | RA9 — I/O pin / port A bit 9 |
| Broche 73 | RA10 — I/O pin / port A bit 10 |
| Broche 74 | RA11 — I/O pin / port A bit 11 |
| Broche 75 | RF0 — I/O pin / port F bit 0 |
| Broche 76 | RF1 — I/O pin / port F bit 1 |
| Broche 77 | RF2 — I/O pin / port F bit 2 |
| Broche 78 | RF3 — I/O pin / port F bit 3 |
| Broche 79 | RF6 — I/O pin / port F bit 6 |
| Broche 80 | RF7 — I/O pin / port F bit 7 |
| Broche 81 | RF8 — I/O pin / port F bit 8 |
| Broche 82 | RF9 — I/O pin / port F bit 9 |
| Broche 83 | VSS — Ground reference |
| Broche 84 | VDD — Positive supply voltage (2.0V-3.6V) |
| Broche 85 | RG13 — I/O pin / port G bit 13 |
| Broche 86 | RG12 — I/O pin / port G bit 12 |
| Broche 87 | RG11 — I/O pin / port G bit 11 |
| Broche 88 | RG10 — I/O pin / port G bit 10 |
| Broche 89 | RF14 — I/O pin / port F bit 14 |
| Broche 90 | RF15 — I/O pin / port F bit 15 |
| Broche 91 | RB10 — I/O pin / port B bit 10 |
| Broche 92 | RC0 — I/O pin / port C bit 0 |
| Broche 93 | RE0 — I/O pin / port E bit 0 |
| Broche 94 | RE1 — I/O pin / port E bit 1 |
| Broche 95 | RE2 — I/O pin / port E bit 2 |
| Broche 96 | RE3 — I/O pin / port E bit 3 |
| Broche 97 | RE4 — I/O pin / port E bit 4 |
| Broche 98 | RE5 — I/O pin / port E bit 5 |
| Broche 99 | RE6 — I/O pin / port E bit 6 |
| Broche 100 | RE7 — I/O pin / port E bit 7 |
Applications typiques
PIC24FJ96GA010T-I/PT convient pour 6 applications: USB Human Interface Devices (HID), Industrial Control Panels, Building Automation & HVAC, Graphical HMI Displays, Consumer Appliances with USB Diagnostics, Data Acquisition & Logging.
USB Human Interface Devices (HID)
The PIC24FJ96GA010T-I/PT's integrated full-speed USB 2.0 peripheral and 96 KB Flash make it well-suited for USB HID-class devices such as keyboards, mice, game controllers, and custom input peripherals. The PIC24F USB module supports device, host, and OTG modes, providing direct connection to a USB connector with no external PHY required. With 8 KB RAM, the part can host the USB stack plus HID report buffers and application logic without external memory. Its 16 MIPS performance comfortably handles HID polling at 1 kHz with margin for debounce, LED control, and macro processing. The 100-pin TQFP exposes the USB D+/D- pins, VBUS sense, and sufficient GPIO for matrix-scanned key arrays. Recommended companion MPNs: PIC24FJ128GA010-I/PT (more Flash for complex macros) and the MCP2200 USB-UART bridge for diagnostic output during bring-up.
Recommandé
Industrial Control Panels
The PIC24FJ96GA010T-I/PT delivers the I/O count and processing throughput required for industrial control panels with keypads, displays, and sensor inputs. The 100-pin package exposes up to 85 GPIO pins suitable for matrix-scanned keypads, LED drivers, and discrete I/O channels. Its enhanced Parallel Master Port (PMP) peripheral directly interfaces graphical LCDs and external memory, while multiple UART, SPI, and I2C channels connect to sensors and isolated fieldbus bridges. The 16 MIPS CPU easily runs PID loops, state machines, and Modbus RTU stacks concurrently. With industrial temperature grade (-40C to +85C, -I suffix), the part is rated for factory-floor environments. Recommended companion MPNs: PIC24FJ64GA010-I/PT (cost-down for smaller panels) and the MCP2515 CAN controller for fieldbus expansion.
Recommandé
Building Automation & HVAC
Building automation and HVAC controllers benefit from the PIC24FJ96GA010T-I/PT's combination of low-power operation, ample Flash for protocol stacks, and rich peripherals. The part runs Modbus RTU, BACnet MS-TP, and proprietary HVAC protocols while simultaneously sampling temperature, humidity, and pressure sensors via the 10-bit ADC. Its 5 x 16-bit timers support triac-based phase-angle or zero-crossing dimming of lighting loads, and its PMP peripheral drives character or graphical LCDs for wall thermostats. With industrial temperature range and 3.3V operation, the device integrates directly into 24V-sourced control boards with buck regulators. Recommended companion MPNs: the PIC24FJ64GA010-I/PF (100-pin TQFP, 64 KB Flash) and the MCP9808 temperature sensor for high-accuracy thermal monitoring.
Recommandé
Graphical HMI Displays
The PIC24FJ96GA010T-I/PT is well-matched to graphical HMI designs with TFT or OLED displays up to 320x240 resolution. The enhanced Parallel Master Port (PMP) provides 8/16-bit parallel interface to common display controllers (ILI9341, SSD1963, ST7789) at sufficient throughput for full-screen refreshes at 30 fps. Its 96 KB Flash holds graphics tables, font assets, and menu structures while 8 KB RAM provides frame buffering in some configurations. The 16 MIPS CPU handles touch input decoding and animation effects without taxing the main application. The 100-pin TQFP package exposes the data bus, control signals, backlight PWM, and a separate SPI channel for touch controllers. Recommended companion MPNs: PIC24FJ128GA010-I/PT (more Flash for full graphical stacks) and the FT813 EVE graphics controller for higher-resolution HMI.
Recommandé
Consumer Appliances with USB Diagnostics
Consumer appliances - coffee machines, white goods, smart kitchen devices - often include USB ports for firmware updates, diagnostics, or media-card interfaces. The PIC24FJ96GA010T-I/PT's integrated USB peripheral and 96 KB Flash handle USB CDC, MSD, and vendor-class stacks for diagnostic interfaces and product data uploads. Its multiple UART channels support Wi-Fi/BLE module command interfaces, while PWM-driven timers drive motor control and heating element regulation. The 100-pin TQFP provides the GPIO count and alternate peripheral functions needed to multiplex user-interface buttons, rotary encoders, displays, and actuators. Recommended companion MPNs: the PIC24FJ64GA010-I/PF (cost-down for simpler appliances) and the RN4871 Bluetooth module for wireless diagnostics.
Recommandé
Data Acquisition & Logging
The PIC24FJ96GA010T-I/PT's 16-channel 10-bit ADC, multiple serial interfaces, and ample RAM support low-to-mid-speed data acquisition and logging applications. The part can sample sensors at up to 500 ksps aggregate, buffer readings in its 8 KB RAM, and write records to SPI Flash or SD cards via the PMP/PSP peripherals. Industrial temperature grade and 3.3V operation suit factory and laboratory environments. The 96 KB Flash accommodates FAT file system drivers, sensor calibration tables, and command interpreters. Recommended companion MPNs: PIC24FJ128GA010-I/PT (more Flash for FAT stacks) and the 25LC1024 SPI EEPROM for non-volatile log storage.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FJ96GA010T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FJ96GA010-I/PT | PIC24FJ128GA010-I/PT | PIC24FJ64GA010-I/PT | PIC24FJ96GA006-I/MR |
|---|---|---|---|---|---|
| Package | 100-pin TQFP (PT) | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 64-pin QFN (MR) - differs |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 96 KB | 96 KB | 128 KB (+33%) | 64 KB (-33%) | 96 KB (same) |
| Data Memory (RAM) | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| CPU Performance | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz |
| Operating Voltage | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V |
| Pin Count | 100 | 100 | 100 | 100 | 64 (different) |
| USB Peripheral | Full-speed USB 2.0 OTG | Full-speed USB 2.0 OTG | Full-speed USB 2.0 OTG | Full-speed USB 2.0 OTG | Full-speed USB 2.0 OTG |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Packaging Format | Tape & Reel (-T suffix) | Tray (no -T suffix) | Tray | Tray | Tray |
Principaux différenciateurs
- USB 2.0 OTG integrated in silicon (vs PIC24FJ64GA004-I/PT (smaller 64-pin variant))
- Larger Flash and RAM resources (vs PIC24FJ64GA010-I/PT (64 KB Flash variant))
- Cost-effective upgrade path within same family (vs PIC24FJ128GA010-I/PT (128 KB Flash variant))
Notes de conception
The PIC24FJ96GA010T-I/PT operates from 2.0V to 3.6V on its VDD pins. Place one 10 uF bulk capacitor near each VDD/VDDCORE pair and 100 nF ceramic decoupling on every VDD pin (multiple VDD pins are spread across the TQFP-100 package per datasheet Table 1-1). For USB applications, the MCU has dedicated USB voltage regulator pins that require their own 1 uF and 100 nF capacitors for stable 3.3V transceiver supply.
When laying out the 100-pin TQFP, route the high-speed USB D+/D- traces as a 90-ohm differential pair with matched length, kept under 50 mm where possible. Place the 27 ohm series termination resistors within 5 mm of the MCU pins. Keep the USB trace away from switching regulators and noisy digital lines; per Microchip application note AN592, ground the USB shield to the digital ground at one point only.
A common pitfall on PIC24FJ GA010 designs is leaving the MCLR pin floating - it must be tied to VDD through a 10 kohm pull-up for normal operation, with a capacitor to ground only if hardware reset time delay is desired. Another frequent issue is forgetting the CONFIG words: PGED1/PGEC1 (RB0/RB1) must be configured correctly for ICSP programming, and unused I/O pins should be configured as outputs and tied low to minimize current draw. Brown-out reset (BOR) should be enabled for reliable industrial operation.
The TQFP-100 footprint is 12x12 mm with 0.4 mm pitch and approximately 0.15 mm trace width between pads. Use 0.4 mm via-in-pad or dog-bone fanout routing. For thermal performance, the die is well-bonded to the lead frame - thermal resistance theta_JA is typically 50 C/W on a standard 4-layer JEDEC test board, sufficient for industrial applications without a heatsink. Place ground vias on all four corners to maximize thermal dissipation.
Informations de conformité
RoHS and REACH compliant per Microchip product page (microchip.com/en-us/product/PIC24FJ96GA010). Not AEC-Q100 qualified - PIC24FJ is a general-purpose industrial/consumer family, not automotive grade. MSL-3 per JEDEC J-STD-020.
