PIC24FV32KA304-E/ML - 32KB Flash 16-bit XLP MCU | Microchip
Référence : PIC24FV32KA304-E/ML ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.92 | $4,92 |
| 10 | $4.43 | $44,30 |
| 100 | $3.94 | $394,00 |
| 500 | $3.45 | $1 725,00 |
| 1 000 | $2.96 | $2 960,00 |
| 2 500 | $2.62 | $6 550,00 |
PIC24FV32KA304-E/ML Présentation
What is a 16-bit microcontroller? A 16-bit MCU executes instructions on 16-bit-wide data paths, giving a better balance between code density and arithmetic throughput than 8-bit parts while remaining simpler than 32-bit Cortex-M devices. The PIC24F family from Microchip targets low-power embedded designs and sits in the broader hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> low-power MCU -> power management node. The PIC24FV variant extends the VDD range higher than the standard PIC24F, enabling 5V analog signal interfacing.
Key features include a 16 MIPS 16-bit CPU core with modified Harvard architecture, a 12-bit A/D converter with up to 16 channels, a 16-bit/32-bit timer/counter block, multiple UART/SPI/I2C peripherals, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, and nanoWatt XLP technology that typically draws less than 20 nA in Deep Sleep mode. The 44-pin QFN package exposes up to 17 general-purpose I/O pins on this code.
Typical applications include battery-powered IoT sensor nodes, low-power wireless modules, capacitive touch user interfaces, portable medical monitoring devices, energy harvesting systems, smart meters, and consumer electronics that require long battery life combined with 5V-tolerant analog I/O. The combination of 32 KB Flash and 2 KB RAM fits small RTOS or bare-metal designs.
When designing with this part, ensure the VDD rail stays within the datasheet limits and use the internal LDO mode where supported. For capacitive touch designs, follow the CTMU layout guidelines in the Microchip TB3019 application note. Pricing is shown as of 2026-09-30 from authorized distributors and depends on quantity breaks.
Alternatives de remplacement direct pour PIC24FV32KA304-E/ML — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FV32KA304-E/ML (même facteur de forme et même empreinte) — différant par Core Architecture, Operating Temperature, Package, Timers, Maximum CPU Speed.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC24FV32KA304-I/ML
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24F32KA304-I/ML
✅ Remplacement direct✓ En stock
$3.21 / unité
Voir la fiche technique →PIC24FV32KA304T-I/ML
✅ Remplacement direct✓ En stock
$2.07 / unité
Voir la fiche technique →PIC24FV32KA304-E/MV
✅ Remplacement direct✓ En stock
$2.55 / unité
Voir la fiche technique →PIC24FV32KA302-I/ML
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$2.71 / unité
Voir la fiche technique →PIC24FV32KA304-E/ML Valeurs maximales et caractéristiques électriques
| Family | PIC24F XLP 16-bit Microcontroller |
| Core Architecture | 16-bit PIC24F (modified Harvard) |
| Program Memory (Flash) | 32 KB (11K x 24) |
| RAM Size | 2 KB |
| EEPROM | 512 B |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Supply Voltage (VDD) | 1.8 V to 5.5 V |
| Température de fonctionnement | -40C to +125C (Extended, -E suffix) |
| Boîtier / Format | 44-QFN (8x8 mm) |
| I/O Pins | 17 |
| ADC | 12-bit, up to 16 channels |
| Timers | 16-bit and 32-bit timer/counter modules |
| Communication | UART, SPI, I2C |
| Special Features | CTMU (Charge Time Measurement Unit), DSBOR, DSWDT, RTCC in Deep Sleep |
| Low-Power Technology | eXtreme Low Power (XLP) nanoWatt |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de PIC24FV32KA304-E/ML
| Broche 1 | RB0/AN0 — GPIO RB0 / analog input AN0 |
| Broche 2 | RB1/AN1 — GPIO RB1 / analog input AN1 |
| Broche 3 | RB2/AN2 — GPIO RB2 / analog input AN2 |
| Broche 4 | RB3/AN3 — GPIO RB3 / analog input AN3 |
| Broche 5 | VSS — Ground reference |
| Broche 6 | VDD — Positive supply voltage (1.8 V to 5.5 V) |
| Broche 7 | RB4/AN4 — GPIO RB4 / analog input AN4 |
| Broche 8 | RB5/AN5 — GPIO RB5 / analog input AN5 |
| Broche 9 | RB6/AN6/PGEC1 — GPIO RB6 / AN6 / ICSP clock |
| Broche 10 | RB7/AN7/PGED1 — GPIO RB7 / AN7 / ICSP data |
| Broche 11 | RA0 — GPIO RA0 |
| Broche 12 | RA1 — GPIO RA1 |
| Broche 13 | RA2 — GPIO RA2 |
| Broche 14 | RA3 — GPIO RA3 |
| Broche 15 | RA4 — GPIO RA4 |
| Broche 16 | RA5 — GPIO RA5 |
| Broche 17 | RA6 — GPIO RA6 |
| Broche 18 | RA7 — GPIO RA7 |
| Broche 19 | VSS — Ground reference |
| Broche 20 | VCAP — Internal voltage regulator decoupling capacitor |
| Broche 21 | RC0 — GPIO RC0 |
| Broche 22 | RC1 — GPIO RC1 |
| Broche 23 | RC2 — GPIO RC2 |
| Broche 24 | RC3 — GPIO RC3 |
| Broche 25 | RC4 — GPIO RC4 |
| Broche 26 | RC5 — GPIO RC5 |
| Broche 27 | RC6 — GPIO RC6 |
| Broche 28 | RC7 — GPIO RC7 |
| Broche 29 | RC8 — GPIO RC8 |
| Broche 30 | RC9 — GPIO RC9 |
| Broche 31 | VSS — Ground reference |
| Broche 32 | VDD — Positive supply voltage |
| Broche 33 | RD0 — GPIO RD0 |
| Broche 34 | RD1 — GPIO RD1 |
| Broche 35 | RD2 — GPIO RD2 |
| Broche 36 | RD3 — GPIO RD3 |
| Broche 37 | RD4 — GPIO RD4 |
| Broche 38 | RD5 — GPIO RD5 |
| Broche 39 | RD6 — GPIO RD6 |
| Broche 40 | RD7 — GPIO RD7 |
| Broche 41 | RE0 — GPIO RE0 |
| Broche 42 | RE1 — GPIO RE1 |
| Broche 43 | RF0 — GPIO RF0 |
| Broche 44 | VSS — Ground reference (exposed pad) |
Applications typiques
PIC24FV32KA304-E/ML convient pour 6 applications: Battery-Powered IoT Sensor Nodes, Capacitive Touch User Interface, Portable Medical Monitoring Devices, Smart Metering and Energy Harvesting, Industrial Sensor Transmitters, Consumer Remote Controls and HIDs.
Battery-Powered IoT Sensor Nodes
The PIC24FV32KA304-E/ML is ideal for battery-powered IoT sensor nodes because it delivers 16 MIPS of 16-bit processing while drawing less than 20 nA in Deep Sleep mode. Its 32 KB Flash and 2 KB RAM are sufficient for BLE/Zigbee stack snippets or LoRaWAN MAC code, and the 1.8 V to 5.5 V VDD range lets the MCU run directly from a 3.6 V lithium-thionyl chloride primary cell. The unique RTCC that runs in Deep Sleep keeps wall-clock time accurate without waking the core, dramatically extending battery life in remote deployments.
Recommandé
Capacitive Touch User Interface
The on-chip CTMU peripheral enables robust capacitive touch buttons, sliders, and proximity sensing with minimal firmware overhead. Hardware-implemented charge timing removes the need for external touch ICs and provides stable readings even under moisture or noise. The 32 KB Flash is sufficient for mTouch reference firmware plus the application layer, while the 1.8 V to 5.5 V range simplifies operation directly from a USB-powered 5 V rail. Engineers should follow Microchip TB3019 layout guidelines for optimal touch performance.
Recommandé
Portable Medical Monitoring Devices
The PIC24FV32KA304-E/ML fits portable medical monitors such as pulse oximeters, glucose meters, and wearable patches. Its 12-bit ADC with up to 16 channels can read multiple biosensors simultaneously, and the extended -40C to +125C temperature grade covers sterilization and skin-contact thermal ranges. The Deep Sleep current under 20 nA allows multi-month battery life on coin cells. The wide VDD range simplifies direct connection to a single lithium primary or rechargeable cell.
Recommandé
Smart Metering and Energy Harvesting
In smart electricity, gas, or water meters, the PIC24FV32KA304-E/ML provides the computation headroom for metering algorithms plus the low sleep current required for 10+ year battery life. The on-chip DSBOR and DSWDT allow brown-out recovery and watchdog operation even in Deep Sleep, which is critical for unattended endpoints. The 12-bit ADC can read shunt current sensors or temperature transducers, and the RTCC keeps accurate time-of-use billing data.
Recommandé
Industrial Sensor Transmitters
For 4-20 mA loop-powered or industrial wireless transmitters, the PIC24FV32KA304-E/ML delivers industrial temperature operation and 5 V tolerance for analog sensor interfacing. The CTMU can measure RTD or thermistor resistance accurately through charge-time methods, eliminating some analog front-end components. The 32 KB Flash holds wireless stack snippets such as WirelessHART or IO-Link device firmware, while 2 KB RAM handles protocol state buffers.
Recommandé
Consumer Remote Controls and HIDs
The PIC24FV32KA304-E/ML is a strong fit for TV remote controls, air-conditioner remotes, game controllers, and other human-interface devices that spend most of their life asleep. Its sub-20 nA Deep Sleep preserves coin-cell life for years, while the IR timer/counter and CTMU enable capacitive buttons plus IR transmit on a single chip. The 32 KB Flash fits full HID descriptor tables and wake-on-touch or wake-on-IR routines.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FV32KA304-E/ML — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FV32KA304-I/ML | PIC24F32KA304-I/ML | PIC24FV32KA304T-I/ML | PIC24FV32KA304-E/MV | PIC24FV32KA302-I/ML |
|---|---|---|---|---|---|---|
| Package | 44-QFN (8x8) | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| EEPROM | 512 B | 512 B | 512 B | 512 B | 512 B | 512 B |
| Max CPU Speed | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Operating Temperature | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) |
| CTMU Capacitive Touch | Yes | Yes | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Extended -40C to +125C temperature grade (vs PIC24FV32KA304-I/ML)
- Wide 1.8 V to 5.5 V VDD range (FV variant) (vs PIC24F32KA304-I/ML)
- 44-pin QFN (8x8 mm) with 17 GPIO and CTMU (vs PIC24FV32KA302-I/ML)
Notes de conception
Estimated: Deep Sleep current is typically less than 20 nA with RTCC and DSWDT disabled. Enable only the peripherals required for wake (DSBOR, DSWDT, RTCC) to minimize sleep current. Use Idle mode when CPU clock can stop but peripherals must run; Sleep when the entire core may stop. Refer to the PIC24F Family Reference Manual DS39708 for sleep configuration.
Place a 100 nF decoupling capacitor as close as possible to each VDD pin and a single bulk capacitor (4.7 uF to 10 uF) on the main VDD rail. The VCAP pin requires a low-ESR 1 uF to 10 uF capacitor to ground for internal regulator stability. The QFN package exposed pad must be soldered to a continuous ground plane for thermal dissipation.
Do not exceed 5.5 V on any VDD pin or the absolute maximum ratings. Configure unused I/O as outputs low to minimize current. When migrating from PIC24F to PIC24FV variants, confirm 5 V analog tolerance is required, since both share pinouts but differ in VDD range. Use Microchip's MPLAB X IDE and XC16 compiler for proper configuration bit programming.
Keep analog input traces short and routed away from digital switching lines to minimize ADC noise coupling. Provide a ground ring around the CTMU touch electrodes and keep the sensor traces of similar length for matched charge timing. Follow Microchip application note TB3019 for capacitive touch PCB layout recommendations.
Informations de conformité
RoHS and REACH compliance confirmed on Microchip product page and DigiKey listing. AEC-Q100 qualification not stated; not designed for automotive safety-critical use. Lead-free reflow profile per JEDEC J-STD-020.