PIC32MX120F032D-50I/TL - 50MHz MIPS32 32KB Flash MCU | Microchip
Référence : PIC32MX120F032D-50I/TL ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.62 | $26,20 |
| 100 | $2.31 | $231,00 |
| 500 | $2.05 | $1 025,00 |
| 1 000 | $1.82 | $1 820,00 |
PIC32MX120F032D-50I/TL Présentation
A microcontroller (MCU) is a single-chip processor that integrates CPU core, non-volatile Flash for program storage, SRAM for working data, and a rich set of peripherals (ADCs, timers, communication blocks, I/O). PIC32MX devices belong to the MIPS32-based 32-bit MCU family, sitting above 8-bit PIC16/PIC18 and below the higher-end PIC32MZ in Microchip's portfolio. The 32-bit MIPS M4K core brings hardware multiply/divide, single-cycle 32-bit ALU operations, and a deterministic interrupt model, making it suitable for embedded control loops, USB device stacks, and modest graphics rendering.
Key features of the PIC32MX120F032D include Peripheral Pin Select (PPS) for flexible signal routing, two I2S/SPI modules for audio codecs, a Parallel Master Port (PMP) for graphics interfaces, a Charge Time Measurement Unit (CTMU) for capacitive touch, 13 channels of 10-bit ADC, and full-speed USB 2.0 device support. The Flash controller offers self-programmability, allowing field firmware updates via bootloader or application code.
Typical applications span consumer audio docks, USB HID devices, industrial HMI panels, low-cost graphics terminals, capacitive touch human-machine interfaces, and small appliances. Designers pick this device when 32-bit throughput is needed but a full PIC32MZ is overkill in cost or footprint.
Designers should evaluate MIPS/Watt versus ARM Cortex-M0+ alternatives. The 6x6 mm VTLA package requires careful thermal management only at high active duty cycles; otherwise the part's 0.5 mA/MHz typical active current keeps dissipation low. Note the 50 MHz industrial grade (-50I) is distinct from the 40 MHz industrial variant.
This page consolidates distributor pricing, package-compatible drop-in alternatives, and practical design notes that go beyond the Microchip datasheet family document, helping engineers evaluate lifecycle risk and supply-chain substitutes.
Alternatives de remplacement direct pour PIC32MX120F032D-50I/TL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MX120F032D-50I/TL (même facteur de forme et même empreinte) — différant par DMA Channels, Package, Program Memory (Flash), ADC, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MX120F032C-V/TL
✅ Remplacement direct✓ En stock
$2.58 / unité
Voir la fiche technique →PIC32MX110F016D-I/PT
✅ Remplacement direct✓ En stock
$1.84 / unité
Voir la fiche technique →PIC32MX110F016DT-I/TL
✅ Remplacement direct✓ En stock
$2.18 / unité
Voir la fiche technique →PIC32MX110F016DT-V/TL
✅ Remplacement direct✓ En stock
$2.07 / unité
Voir la fiche technique →PIC32MX110F016CT-I/TL
✅ Remplacement direct✓ En stock
$1.84 / unité
Voir la fiche technique →PIC32MX120F032D-50I/TL Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M4K 32-bit RISC |
| Maximum CPU Speed | 50 MHz |
| Program Memory (Flash) | 32 KB (32K x 8) |
| Data SRAM | 8 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Active Current | < 0.5 mA/MHz |
| Température de fonctionnement | -40C to +105C (Industrial grade -I) |
| Boîtier | 44-VTLA (6x6 mm) |
| Type de montage | Surface Mount |
| ADC | 13 channels x 10-bit |
| I2S/SPI Modules | 2 |
| USB | Full-Speed USB 2.0 Device |
| Parallel Master Port (PMP) | Yes |
| Peripheral Pin Select (PPS) | Yes |
| Charge Time Measurement Unit (CTMU) | Yes (mTouch capacitive touch) |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MX120F032D-50I/TL
| Broche 1 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 2 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 3 | VDD — Positive supply voltage (2.3 V to 3.6 V) |
| Broche 4 | VSS — Ground reference |
| Broche 5 | OSCI — Primary oscillator input or crystal connection |
| Broche 6 | OSCO — Primary oscillator output |
| Broche 7 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 8 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 9 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 10 | VUSB — USB internal transceiver supply (3.3 V typical) |
| Broche 11 | D+ — USB D+ data line |
| Broche 12 | D- — USB D- data line |
| Broche 13 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 14 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 15 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 16 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 17 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 18 | VSS — Ground reference |
| Broche 19 | VDD — Positive supply voltage (2.3 V to 3.6 V) |
| Broche 20 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 21 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 22 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 23 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 24 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 25 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 26 | ANx — Analog input (10-bit ADC) |
| Broche 27 | ANx — Analog input (10-bit ADC) |
| Broche 28 | ANx — Analog input (10-bit ADC) |
| Broche 29 | VREF+ — ADC positive reference voltage |
| Broche 30 | VREF- — ADC negative reference / analog ground |
| Broche 31 | AVDD — Analog supply voltage |
| Broche 32 | AVSS — Analog ground |
| Broche 33 | MCLR — Master clear reset (active-low) |
| Broche 34 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 35 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 36 | PMAx — Parallel Master Port address / data |
| Broche 37 | PMAx — Parallel Master Port address / data |
| Broche 38 | PMD — Parallel Master Port data |
| Broche 39 | PMD — Parallel Master Port data |
| Broche 40 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 41 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 42 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 43 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
| Broche 44 | RPn/GPIO — Remappable peripheral pin / general purpose I/O |
Applications typiques
PIC32MX120F032D-50I/TL convient pour 6 applications: USB HID Human Interface Devices, Audio Codec Front-End with I2S, Capacitive Touch HMI Panels (mTouch), Low-Cost Graphics HMI Terminals, Industrial Sensor Aggregation Nodes, USB CDC Virtual COM Port Bridges.
USB HID Human Interface Devices
The PIC32MX120F032D-50I/TL is well suited to USB HID designs such as keyboards, mice, game controllers, and custom input peripherals. The integrated full-speed USB 2.0 device controller plus 8 KB SRAM comfortably hosts the USB HID class driver and small report descriptors, while 32 KB Flash holds composite HID stacks. Microchip's MPLAB Harmony framework provides ready-made USB HID examples that compile to under 16 KB Flash. The 50 MHz MIPS32 M4K core executes HID report handling at sub-millisecond latency. PPS routing simplifies PCB layout by remapping USB D+/D- to convenient pins without layout rework.
Recommandé
Audio Codec Front-End with I2S
The PIC32MX120F032D-50I/TL drives external audio codecs via its two I2S/SPII modules, suitable for Bluetooth audio docks, USB speakers, and consumer soundbars. DMA-driven I2S transfers leave the MIPS32 M4K core free for audio processing or Bluetooth host-stack glue logic. The 13-channel 10-bit ADC supports auxiliary analog monitoring (battery, jack detect). At 50 MHz, sample rates up to 48 kHz are achievable with headroom for FIR filters. Designers pair it with codecs such as the Microchip MCP4921 or AK5720.
Recommandé
Capacitive Touch HMI Panels (mTouch)
The PIC32MX120F032D-50I/TL's integrated Charge Time Measurement Unit (CTMU) enables Microchip's mTouch capacitive touch sensing for buttons, sliders, and proximity sensors. Industrial HMI front panels, appliance controls, and IoT smart switches benefit from 13 ADC channels shared with CTMU for multi-button matrices. The 32 KB Flash holds complete mTouch firmware plus application logic; 8 KB RAM is sufficient for state machines and debounce buffers. PPS remaps touch I/O for flexible PCB layout.
Recommandé
Low-Cost Graphics HMI Terminals
The PIC32MX120F032D-50I/TL drives small TFT or OLED graphical displays through its Parallel Master Port (PMP), targeting low-cost graphics HMI on appliances, instrument front panels, and Point-of-Sale terminals. PMP supports 8/16-bit parallel data with programmable timing, connecting to common display controllers like SSD1963, ILI9341, or ST7565R. At 50 MHz, framebuffer updates are smooth for menus up to 320x240. Microchip's Microchip Graphics Library provides primitives for icons, text, and progress bars.
Recommandé
Industrial Sensor Aggregation Nodes
The PIC32MX120F032D-50I/TL aggregates analog sensor data via its 13-channel 10-bit ADC, processes with the MIPS32 M4K core, and forwards via UART/SPI/I2C to industrial backplanes. Typical use cases include multi-channel thermocouple scanners, 4-20 mA loop readers, and PLC I/O expanders. The -40C to +105C industrial temperature grade suits factory environments, while sub-0.5 mA/MHz active current supports solar or battery-powered remote sensors.
Recommandé
USB CDC Virtual COM Port Bridges
The PIC32MX120F032D-50I/TL serves as a USB-to-UART bridge using the integrated full-speed USB device plus DMA-driven UART, ideal for replacing legacy RS-232 ports with USB CDC class devices. Engineers use it for debug consoles, firmware-loader dongles, and industrial programming tools. The 8 KB SRAM is sufficient for small USB CDC ACM stacks, while 32 KB Flash allows bundled bootloader and application code. PPS remapping simplifies board routing when USB and UART pins are far apart.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MX120F032D-50I/TL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MX120F032C-V/TL | PIC32MX110F016D-I/PT | PIC32MX110F016DT-I/TL | PIC32MX110F016DT-V/TL | PIC32MX110F016CT-I/TL |
|---|---|---|---|---|---|---|
| Package | 44-VTLA (6x6 mm) | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 16 KB (-50%) | 16 KB (-50%) | 16 KB (-50%) | 16 KB (-50%) |
| SRAM | 8 KB | 8 KB | 4 KB (-50%) | 4 KB (-50%) | 4 KB (-50%) | 4 KB (-50%) |
| Maximum CPU Speed | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Core Architecture | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K |
| Operating Temperature | -40C to +105C (Industrial -50I) | -40C to +105C (V temp grade) | -40C to +105C (Industrial -I) | -40C to +105C (Industrial -I) | -40C to +105C (V temp grade) | -40C to +105C (Industrial -I) |
| USB | Full-Speed USB 2.0 Device | Full-Speed USB 2.0 Device | Full-Speed USB 2.0 Device | Full-Speed USB 2.0 Device | Full-Speed USB 2.0 Device | Full-Speed USB 2.0 Device |
Principaux différenciateurs
- Peripheral Pin Select (PPS) flexibility (vs PIC32MX110F016D-I/PT)
- CTMU capacitive touch subsystem (vs PIC32MX110F016CT-I/TL)
- 32 KB Flash over 16 KB variant (vs PIC32MX110F016DT-I/TL)
Notes de conception
Decouple VDD with a 10 uF bulk capacitor plus a 0.1 uF ceramic placed within 5 mm of the package. For USB applications, VUSB requires its own 0.1 uF decoupling near pin 10. AVDD (pin 31) should be tied to VDD or filtered through a ferrite bead for ADC noise reduction; add 10 uF + 0.1 uF on AVDD when the ADC is active. Avoid switching the DC-DC converter's high-di/dt node near VDD traces.
Route USB D+ and D- as a 90-ohm differential pair with continuous ground reference, keeping trace length under 50 mm. The VTLA package has an exposed thermal pad that should be soldered to a copper pour for mechanical strength even though this MCU dissipates little power. Keep the 50 MHz oscillator crystal traces short and symmetric, with a ground guard ring around the crystal pins.
Do not confuse the /TL package (44-VTLA) with /PT (44-TQFP), /ML (44-QFN), or /SO (44-SOIC) - they share the same die but require different PCB footprints. The MCLR pin (pin 33) requires a 10 kohm pull-up to VDD; leaving it floating prevents code execution. PPS input mapping must be unlocked before configuration - use the CFGCON unlock pattern or pins default to GPIO.
Estimated: at 50 MHz full-load active current of 0.5 mA/MHz = 25 mA on a 3.3 V supply yields ~82 mW dissipation. The 44-VTLA theta_JA is approximately 35 C/W (per Microchip package datasheet), giving a 2.9C junction rise above ambient. Even at +105C ambient, the die remains well below the +125C max junction. No external heatsink is required for typical MCU duty cycles.
Informations de conformité
Industrial temperature grade -40C to +105C. Not AEC-Q100 qualified - choose PIC32MX1XX automotive variants (Q-suffix) for automotive applications. RoHS compliant per Microchip product page.
