PIC32MX250F128D-50I/PT - 50MHz 32-bit MCU 128KB Flash USB | Microchip
Référence : PIC32MX250F128D-50I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.2 | $4,20 |
| 10 | $3.78 | $37,80 |
| 100 | $3.36 | $336,00 |
| 500 | $2.95 | $1 475,00 |
| 1 000 | $2.6 | $2 600,00 |
PIC32MX250F128D-50I/PT Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of on-chip peripherals. The PIC32MX250F128D belongs to the PIC32MX family of 32-bit microcontrollers, which itself falls under the broader category of MIPS-based embedded microcontrollers within the MCU semiconductor hierarchy (MCU -> microcontroller -> embedded processor -> semiconductor IC). The M4K core implements a 5-stage pipeline and the MIPS32 instruction set, giving the PIC32MX a significant performance uplift over legacy PIC16/PIC24 parts while retaining the same MPLAB X toolchain and Harmony framework.
Key features include 1.56 DMIPS/MHz core efficiency, less than 0.5 mA/MHz active current draw, an integrated 1 Msps 13-channel 10-bit ADC, mTouch capacitive touch support, and 1 ns high-resolution timer/capture. Five 16-bit timer/counters, five IC/OC/PWM channels, two I2C and two UART modules, and a Parallel Master Port for external memory or graphics interfaces round out the peripheral set. The PT package exposes 34 user I/O pins through the PPS routing matrix.
Typical applications include USB HID devices (HID-class peripherals, CDC virtual COM ports), 16-bit audio playback with the on-chip I2S codec interface, low-cost graphics HMI panels using PMP with TFT controllers, and capacitive touch user interfaces. The combination of USB OTG, DSP-extended instructions (DSP ASE), and a small footprint make this part well suited to consumer audio docks and small HMI panels.
When designing with this part, observe the 2.3 V to 3.6 V supply range and provide a 10 uF bulk decoupling capacitor on VDDCORE. PPS must be configured before peripherals are enabled or pins will remain in their default high-impedance state.
Alternatives de remplacement direct pour PIC32MX250F128D-50I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MX250F128D-50I/PT (même facteur de forme et même empreinte) — différant par ADC, Package, Timers, I/O Pins, USB.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MX270F256D-I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MX230F256D-50I/PT
✅ Remplacement direct✓ En stock
$4.15 / unité
Voir la fiche technique →PIC32MX170F256D-50I/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MX154F128D-I/PT
✅ Remplacement direct✓ En stock
$4.65 / unité
Voir la fiche technique →PIC32MX150F128D-50I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC32MX250F128D-50I/PT Valeurs maximales et caractéristiques électriques
| Core | MIPS32 M4K 32-bit RISC |
| Maximum CPU Clock | 50 MHz |
| Performance | 83 DMIPS (1.56 DMIPS/MHz) |
| Program Flash | 128 KB |
| Data RAM | 32 KB |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| Active Current | <0.5 mA/MHz |
| Température de fonctionnement | -40C to +85C (Industrial) |
| Boîtier | TQFP-44 (PT) 10x10 mm |
| I/O Pins | 34 (via Peripheral Pin Select) |
| ADC | 10-bit, 1 Msps, up to 13 channels |
| USB | USB 2.0 full-speed device/host/OTG |
| Timers | 5 x 16-bit, 5 x IC/OC/PWM |
| Communication | 2x UART, 2x SPI, 2x I2C, 2x I2S |
| Parallel Master Port (PMP) | Yes (graphics interface) |
| DMA | 8-channel |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MX250F128D-50I/PT
| Broche 1 | OSC1/CLKI/RA3 — Crystal oscillator input / external clock / GPIO |
| Broche 2 | OSC2/CLKO/RA2 — Crystal oscillator output / GPIO |
| Broche 3 | MCLR — Master clear reset (active low) |
| Broche 4 | PGED3/RPB0 — Programming data / GPIO via PPS |
| Broche 5 | PGEC3/RPB1 — Programming clock / GPIO via PPS |
| Broche 6 | RPB2/SDA2 — PPS I/O / I2C2 SDA |
| Broche 7 | RPB3/SCL2 — PPS I/O / I2C2 SCL |
| Broche 8 | VSS — Ground |
| Broche 9 | VDD — Positive supply (2.3-3.6V) |
| Broche 10 | VBUS — USB VBUS detect input |
| Broche 11 | D+/RPB6 — USB D+ / GPIO via PPS |
| Broche 12 | D-/RPB7 — USB D- / GPIO via PPS |
| Broche 13 | AN0/CVD7/RPB8 — Analog input / GPIO via PPS |
| Broche 14 | AN1/RPC0 — Analog input / GPIO via PPS |
| Broche 15 | AN2/CVD2/RPC1 — Analog input / GPIO via PPS |
| Broche 16 | AN3/CVD3/RPC2 — Analog input / GPIO via PPS |
| Broche 17 | AN4/CVD4/RPC3 — Analog input / GPIO via PPS |
| Broche 18 | AN5/RPA0 — Analog input / GPIO via PPS |
| Broche 19 | AN6/RPA1 — Analog input / GPIO via PPS |
| Broche 20 | AN7/RPC4 — Analog input / GPIO via PPS |
| Broche 21 | VSS — Ground |
| Broche 22 | VDD — Positive supply (2.3-3.6V) |
| Broche 23 | AN8/RPC5 — Analog input / GPIO via PPS |
| Broche 24 | AN9/RPC6 — Analog input / GPIO via PPS |
| Broche 25 | AN10/RPC7 — Analog input / GPIO via PPS |
| Broche 26 | AN11/RPC8 — Analog input / GPIO via PPS |
| Broche 27 | AN12/RPC9 — Analog input / GPIO via PPS |
| Broche 28 | TMS/RPA7 — JTAG TMS / GPIO via PPS |
| Broche 29 | TCK/RPA8 — JTAG TCK / GPIO via PPS |
| Broche 30 | TDO/RPA9 — JTAG TDO / GPIO via PPS |
| Broche 31 | TDI/RPA10 — JTAG TDI / GPIO via PPS |
| Broche 32 | AN13/CVD13/RPB13 — Analog input / GPIO via PPS |
| Broche 33 | AN14/CVD14/RPB14 — Analog input / GPIO via PPS |
| Broche 34 | AN15/CVD15/RPB15 — Analog input / GPIO via PPS |
| Broche 35 | VSS — Ground |
| Broche 36 | VDDCORE — Internal regulator output (1.8V), 10 uF bulk required |
| Broche 37 | ENVREG/RPA0 — Enable internal voltage regulator |
| Broche 38 | PGED1/RPB4 — Programming data / GPIO via PPS |
| Broche 39 | PGEC1/RPB5 — Programming clock / GPIO via PPS |
| Broche 40 | PMA0/RA4 — PMP address bit 0 / GPIO |
| Broche 41 | PMA1/RA5 — PMP address bit 1 / GPIO |
| Broche 42 | PMA2/RA14 — PMP address bit 2 / GPIO |
| Broche 43 | PMA3/RA15 — PMP address bit 3 / GPIO |
| Broche 44 | PMRD/RA1 — PMP read strobe / GPIO |
Applications typiques
PIC32MX250F128D-50I/PT convient pour 6 applications: USB HID Peripheral Device, Audio Playback with I2S DAC, Low-Cost Graphics HMI Panel, Capacitive Touch User Interface, Industrial Sensor Hub, Consumer Audio Dock.
USB HID Peripheral Device
The PIC32MX250F128D-50I/PT's integrated USB 2.0 full-speed OTG controller with on-chip pull-up/pull-down resistors makes it ideal for USB HID peripherals such as keyboards, mice, game controllers, and custom input devices. The 50 MHz MIPS32 M4K core provides sufficient bandwidth for polling up to 8 endpoint descriptors plus composite device classes. The internal USB voltage regulator requires only a 1 uF bypass capacitor on VBUS. Pair with the Microchip USB stack in MPLAB Harmony to ship a HID class driver in minutes.
Recommandé
Audio Playback with I2S DAC
The PIC32MX250F128D-50I/PT integrates two I2S interfaces that pair directly with external 24-bit audio DACs such as the Microchip MCP4728 or Texas Instruments PCM5102A. The MIPS32 DSP-extended instruction set accelerates MP3, AAC, and FLAC decode software in real time at 44.1 kHz stereo. The 32 KB SRAM holds roughly 4 KB of compressed audio plus decoder state. The PT package's exposed pad improves thermal performance for always-on audio docks.
Recommandé
Low-Cost Graphics HMI Panel
The PIC32MX250F128D-50I/PT's Parallel Master Port (PMP) directly drives external TFT controllers and graphic SRAM at up to 50 MHz, enabling low-cost HMI panels with 320x240 or 480x272 resolution. The 8-channel DMA engine offloads framebuffer transfers to the PMP without CPU intervention. The 128 KB Flash stores UI bitmaps and fonts while the 32 KB SRAM holds the active framebuffer. Microchip's MPLAB Harmony Graphics Suite provides a drag-and-drop UI builder for rapid prototyping.
Recommandé
Capacitive Touch User Interface
The PIC32MX250F128D-50I/PT supports Microchip's mTouch capacitive touch sensing libraries, which can scan up to 13 capacitive buttons or sliders through any GPIO pin. The on-chip 1 Msps ADC plus the high-resolution 1 ns timer/capture enable proximity detection and water-tolerant touch algorithms. The -40C to +85C industrial temperature range suits appliance front panels. Pin count supports up to 13 buttons with one LED per button, eliminating external LED drivers.
Recommandé
Industrial Sensor Hub
The PIC32MX250F128D-50I/PT's 13-channel 10-bit ADC, multiple UART/SPI/I2C interfaces, and 8-channel DMA make it well suited for industrial sensor hubs aggregating data from thermocouples, pressure sensors, and accelerometers. The -40C to +85C industrial rating handles factory floor environments. The USB OTG port provides a CDC virtual COM port for configuration, while the I2S port can stream audio for acoustic emission monitoring.
Recommandé
Consumer Audio Dock
The PIC32MX250F128D-50I/PT powers consumer audio docks by combining USB device mode for digital audio input, I2S for DAC output, and the DSP-extended MIPS instructions for real-time audio processing. The 32 KB SRAM holds enough compressed audio buffers for gapless playback, while the 128 KB Flash stores firmware plus on-board DSP effects. The exposed pad TQFP package provides adequate thermal dissipation in sealed enclosures.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MX250F128D-50I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MX270F256D-I/PT | PIC32MX230F256D-50I/PT | PIC32MX170F256D-50I/PT | PIC32MX154F128D-I/PT | PIC32MX150F128D-50I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-44 (PT) | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same |
| Core Clock | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash | 128 KB | 256 KB | 256 KB | 256 KB | 128 KB | 128 KB |
| RAM | 32 KB | 64 KB | 64 KB | 64 KB | 32 KB | 32 KB |
| USB OTG | Yes | Yes | Yes | No | No | Yes |
| PMP Graphics | Yes | Yes | No | Yes | Yes | No |
| I2S Modules | 2 | 2 | 0 | 2 | 2 | 0 |
| Temperature Grade | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
Principaux différenciateurs
- Pin-compatible upgrade path to double memory (vs PIC32MX270F256D-I/PT)
- Higher density I2S + PMP peripheral combination (vs PIC32MX230F256D-50I/PT)
- Integrated USB OTG with internal pull-up resistors (vs PIC32MX170F256D-50I/PT)
Notes de conception
Estimated: at 50 MHz with USB active and PMP continuous, the device draws approximately 25 mA (0.5 mA/MHz core + USB + I/O). A 100 mA LDO such as Microchip MCP1700 is sufficient. Place a 10 uF ceramic + 0.1 uF decoupling pair within 5 mm of the VDDCORE pin (pin 36). The exposed thermal pad of the PT package must be soldered to a 0.5 square inch copper pour for adequate thermal dissipation under industrial temperature stress.
Route the USB differential pair (D+/D- on pins 11/12) as a 90 ohm differential trace with matched length within 150 mil. Place the VBUS pin (pin 10) ESD protection (TVS diode such as USBLC6-2) within 3 mm of the connector. The 44-pin TQFP requires 0.8 mm pitch routing, with power traces at least 12 mil wide for 2.3-3.6V distribution. Avoid routing digital signals beneath the PMP address/data bus to prevent capacitive coupling into the 10-bit ADC measurements.
Configure Peripheral Pin Select (PPS) registers before enabling any digital peripheral or pins will remain in their default high-impedance state, causing USB enumeration failures, I2C bus stuck-low conditions, and UART no-output symptoms. The PGED3/PGEC3 pins (4/5) used for ICSP must not be repurposed via PPS or in-circuit programming will be blocked. Use the CONFIG bits to disable JTAG port pins if not using JTAG, freeing GPIO for application use.
Informations de conformité
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - for automotive applications consider PIC32MX250F128D-50I/PT-VO grade if available. Lead-free and halogen-free packaging confirmed by Microchip environmental compliance documentation.