SI3210M-FT 38-TSSOP 5V Legacy SLIC Codec | Skyworks
Référence : SI3210M-FT ✗ Fin de vieSI3210M-FT Présentation
A Subscriber Line Interface Concept, or SLIC, is an integrated analog telephone interface that connects a central-office line to a voice codec. In the system hierarchy, the SI3210M-FT combines line-interface functions with signal conversion to provide a compact solution for legacy voice equipment. Its long availability history makes it especially relevant to sustaining legacy telephony, voice-over-IP, PBX, fax, and embedded telephone designs rather than new mixed-signal platforms.
The principal device characteristics are its 38-pin TSSOP package, 3.3V or 5V operation, 88 mA supply current, 700 mW power rating, and 0°C to +70°C temperature range. It performs SLIC and codec functions on one IC, reducing the number of discrete interface components required around the telephone line. The manufacturer classifies the product as a legacy telecom interface IC, which is an important qualification consideration for long-lived industrial or telecommunications equipment.
At the circuit level, the SI3210M-FT integrates the functions needed to interface voice-band signals through a subscriber line and convert the analog voice signal for digital processing elsewhere in the equipment. Its external circuit requirements, line-side component values, bypass capacitors, and supported operating region should be implemented directly from the manufacturer’s reference design and pin-description tables. Legacy SLIC designs are particularly sensitive to component tolerances and line-side network selection because those choices influence gain, balance, impedance, and voice quality.
Typical applications include analog telephone adapters, simple voice-over-IP terminals, PBX line cards, fax machines, legacy voicemail equipment, and embedded communications controllers. The SI3210M-FT is most appropriate where an established 38-TSSOP SLIC/codec design already exists and a second-source or continuity solution is needed. For a new design, engineers should also evaluate modern integrated SLIC devices with different pinouts, interfaces, or lifecycle positioning before committing the board layout.
Design the supply rails and decoupling around the 3.3V or 5V operating requirement, and keep analog line-side traces away from switching supplies, clocks, and high-current return paths. Validate the complete telephone network, including ring voltage, line current, codec clocking, and off-hook behavior, under worst-case conditions. Because this is a legacy interface IC, procurement continuity and firmware or system compatibility may matter more than headline performance.
This product record combines package, electrical, environmental, sourcing, and cross-reference information with practical selection guidance. It also identifies the differences between catalog suffixes and emphasizes the need to distinguish electrically useful alternatives from reel-ordering variants that add no engineering benefit.
Alternatives de remplacement direct pour SI3210M-FT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
SI3210M-BT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
SI3210M-FT Spécifications
| Product Type | Subscriber Line Interface Concept (SLIC) and codec IC |
| Number of Channels | 1 channel |
| Tension d'alimentation | 3.3V or 5V |
| Courant d'alimentation | 88 mA |
| Power Rating | 700 mW |
| Température de fonctionnement | 0°C to +70°C |
| Boîtier | 38-pin TSSOP |
| Nombre de broches | 38 pins |
| Type de montage | Surface mount |
| Product Classification | Telecom interface IC |
| Legacy Status | Legacy SLIC |
| Statut RoHS | RoHS compliant |
| Input Supply Voltage | 3.3V to 35V through the DC-DC controller input |
| Battery Tracking | Supported by the DC-DC controller |
| Functional Integration | SLIC and codec functions in one IC |
Guide de configuration des broches du SI3210M-FT 38-pin tssop
Configuration des broches du SI3210M-FT (boîtier 38-pin tssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour SI3210M-FT.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
SI3210M-FT convient pour 6 applications: Analog Telephone Adapter, PBX Line Card, Voice-over-IP Terminal, Legacy Fax Machine, Embedded Voicemail Controller, Legacy Voice Communication Appliance.
Analog Telephone Adapter
The SI3210M-FT fits a one-channel analog telephone adapter because it combines the subscriber-line interface and codec functions in one 38-pin TSSOP. Its 3.3V or 5V operating capability and 88mA supply current support conventional telecom hardware, while the integrated codec reduces the number of separate analog voice components. A designer should preserve the established reference network, codec timing, and line-side layout because changing passive values can alter gain, balance, and voice quality. Validate ring, off-hook, and speech-path behavior across the intended telephone network.
Recommandé
PBX Line Card
A legacy PBX line card can use the SI3210M-FT when each subscriber requires one analog voice channel and the surrounding circuitry matches its SLIC/codec architecture. The 0°C to +70°C commercial range is suitable for many indoor telecommunications products, and the 38-pin TSSOP simplifies board-area planning compared with separate line-interface and codec devices. Designers should verify ringing voltage, line current, codec clocking, and system control compatibility with the complete equipment specification. Thermal review should include the 88mA device current together with external line-side dissipation.
Recommandé
Voice-over-IP Terminal
The SI3210M-FT is suitable for a voice-over-IP terminal that retains an analog telephone-line interface rather than using a purely digital headset. Its integrated SLIC and codec functions can simplify the analog front end, while 3.3V or 5V operation supports common telecom supply rails. The 88mA supply current and 700mW power rating require adequate local decoupling and thermal margin. Firmware and hardware must coordinate codec timing, line supervision, ring detection, and off-hook control; use the manufacturer’s reference circuit to preserve signal integrity and network compatibility.
Recommandé
Legacy Fax Machine
The SI3210M-FT can support a legacy fax machine or fax interface card when the original equipment used a compatible one-channel SLIC/codec solution. The commercial 0°C to +70°C range covers typical indoor operating conditions, and the 38-pin TSSOP package matches established board-space requirements. Its 5V compatibility and 88mA supply current make it straightforward to retain in a proven design, but the exact pin configuration and codec data format must match. Test transmission quality, line seizure, and ring handling before substituting a different ordering code.
Recommandé
Embedded Voicemail Controller
An embedded voicemail controller can use the SI3210M-FT when it requires one analog line and already supports the corresponding codec and supervision signals. Integrating SLIC and codec functions in a single 38-pin TSSOP reduces component count in space-constrained equipment. The 3.3V or 5V supply options allow alignment with existing telecom power architecture, while the 88mA operating current must be included in rail and thermal budgets. Keep sensitive line-side routing separated from processor and switching circuitry, and validate message-playback gain, hook-switch behavior, and loop-current handling.
Recommandé
Legacy Voice Communication Appliance
The SI3210M-FT is appropriate for sustaining a legacy voice communication appliance whose motherboard was designed around a 38-pin TSSOP SLIC/codec. Its 5V operating compatibility, 88mA supply current, and 0°C to +70°C range align with many established commercial products. Because the device is categorized as a legacy telecom interface, procurement continuity and exact ordering-code control are more important than for a current-generation component. Before redesign, compare the complete functional block against modern interface ICs; a functional alternative with another package would require layout changes and is not a drop-in replacement.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour SI3210M-FT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | SI3210M-BT |
|---|---|---|
| Package | 38-pin TSSOP | 38-pin TSSOP |
| Brand | Skyworks Solutions | Skyworks Solutions |
| Product Type | Subscriber Line Interface Concept (SLIC) and codec IC | Telecom line-management IC |
| Channel Count | 1 channel | 1 channel |
| Supply Voltage | 3.3V or 5V | 5V |
| Power Rating | 700 mW | 700 mW |
Principaux différenciateurs
- Integrated one-channel SLIC and codec in the established 38-pin TSSOP footprint (vs SI3210M-BT)
- Compatible with conventional 3.3V or 5V telecom supply arrangements (vs SI3210M-BT)
- Defined commercial operating range (vs SI3210M-BT)
Notes de conception
Keep the subscriber-line side physically separated from codec clocks, digital control signals, switching-regulator nodes, and high-current return paths. Route sensitive analog nets over a continuous ground plane, minimize loop area, and place line-side protection and network components close to their associated pins. Although the public listing confirms a 38-pin TSSOP, use the manufacturer pin-description and reference-layout figures before assigning every connection.
Design the 3.3V or 5V supply network for the stated 88mA device current and place the required bypass capacitors at the device supply pins. Estimated: a 5V rail at 88mA dissipates 0.44W in the supply path before external circuitry is included; use that figure for rail-current and thermal-budget calculations. Confirm capacitor type, voltage rating, and reference-layout placement against the manufacturer application circuit.
Do not treat every SI3210M orderable suffix as an automatic drop-in replacement. The SI3210M-FTR listing is a reel-packaging form and should not be counted as a separate electrical alternative, while the SI3210M-BT has a different ordering suffix that may encode configuration or temperature differences. Confirm pin functions, temperature grade, codec interface, line-side limits, and package drawing before substitution or production release.
Include the SI3210M-FT and its surrounding line-interface circuitry in the enclosure thermal review. Estimated: at 5V and 88mA, the device’s supply-input power is 0.44W; compare that value with the listed 700mW power rating rather than assuming the rating is an allowable board-level dissipation target. Provide copper area, ventilation, and adjacent heat-source spacing appropriate to the final product temperature rise.
Informations de conformité
RoHS compliance is identified in the component listing. The SI3210M-FT is a commercial-temperature legacy telecom interface IC, not an automotive-qualified device.