SKY66122-11 - 863-928MHz Wi-SUN RF Front End | Skyworks
Référence : SKY66122-11 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $3.72 | $3,72 |
| 10 | $3.42 | $34,20 |
| 100 | $3.15 | $315,00 |
| 500 | $2.95 | $1 475,00 |
| 1 000 | $2.78 | $2 780,00 |
SKY66122-11 Présentation
An RF front-end module is a subsystem sitting between the radio transceiver IC and the antenna in a wireless signal chain. It typically combines a transmit-path power amplifier, a receive-path low-noise amplifier, RF switches for TX/RX switching, and a power detector for closed-loop output power control, all matched to 50 ohms so the system designer does not need external RF matching components. FEMs belong to the broader hierarchy of RF ICs, which includes transceivers, amplifiers, switches, and filters within the radio-frequency semiconductor family.
Key features of the SKY66122-11 include fully matched 50 ohm RF input and output that eliminate external matching networks, digital control interfaces compatible with 1.6 V to 3.6 V CMOS logic levels for direct connection to common sub-GHz transceivers, an integrated RF switch for TX/RX path selection, and an integrated power detector that enables output power monitoring and closed-loop control. LCSC-listed features also cite an ultra-low 0.05 uA shutdown current, critical for battery-powered Wi-SUN and mesh nodes that sleep for most of their duty cycle.
The integration of PA, LNA, switch, and coupler/detector in a single 6x6 mm MCM dramatically reduces board area compared with a discrete chain, and the internal inter-stage matching and harmonic filtering simplify compliance design for regional sub-GHz regulations in the 863-928 MHz band. The module is designed for ease of use and maximum flexibility, per the Skyworks product page.
Typical applications include Wi-SUN mesh network routers and border routers, high-power ISM band telemetry, long-range Meshtastic and LoRa-style nodes (the part is used with the Semtech SX1262 in WisMesh high-power booster designs), smart metering, and street lighting control networks.
Design consideration: as a high-power PA module, the SKY66122-11 requires attention to thermal pad grounding and supply decoupling; consult the manufacturer datasheet for the recommended PCB land pattern and thermal via array.
This page synthesizes distributor pricing, availability, application context, and practical design notes not found in a single manufacturer datasheet.
Alternatives de remplacement direct pour SKY66122-11 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesSKY66122-11 Valeurs maximales et caractéristiques électriques
| Fonction | RF Front-End Module (LNA + PA + Switch + Power Detector) |
| Frequency Range | 863 MHz to 928 MHz |
| Application Standard | Wi-SUN, ISM band, IoT |
| RF Input/Output Impedance | 50 ohms (fully matched) |
| Control Interface | Digital, CMOS compatible 1.6 V to 3.6 V |
| Courant d'arrêt | 0.05 uA |
| Integrated LNA | Yes |
| Integrated RF Switch | Yes |
| Integrated Power Detector | Yes |
| Boîtier | 36-MCM (6x6 mm) |
| Type de montage | Surface Mount |
Guide de configuration des broches du SKY66122-11 36-mcm (6x6 mm)
Configuration des broches du SKY66122-11 (boîtier 36-mcm (6x6 mm)). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour SKY66122-11.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
SKY66122-11 convient pour 6 applications: Wi-SUN Mesh Network Routers, Long-Range LoRa / Meshtastic Nodes, Smart Metering and AMI, Industrial IoT Telemetry and SCADA, Street Lighting Control Networks, High-Power ISM Band Point-to-Point Links.
Wi-SUN Mesh Network Routers
Wi-SUN field-area networks used in smart utility and smart-city infrastructure operate in the 863-928 MHz sub-GHz band and require high transmit power for multi-kilometer mesh hops. The SKY66122-11 fits this application directly: its 863-928 MHz coverage matches Wi-SUN regional channel plans, and its integrated PA boosts transceiver output to the high-power levels needed for router and border-router duty. Because the RF ports are fully matched to 50 ohms, the module connects to a SAW filter and antenna switch with no additional matching design, shortening regulatory qualification. The integrated power detector supports closed-loop output power control, keeping radiated power within regional limits across temperature and supply variation, while the 0.05 uA shutdown current preserves battery life in sleep-dominated mesh duty cycles.
Recommandé
Long-Range LoRa / Meshtastic Nodes
Community and industrial long-range mesh nodes, such as Meshtastic devices, benefit from amplifying a standard sub-GHz transceiver to extend link budget. The SKY66122-11 is proven in this role in the WisMesh High Power Booster Starter Kit, where it amplifies the Semtech SX1262 output with a dedicated SAW filter for extended range. The module's 50 ohm matched input and output let designers insert it between transceiver and filter without RF tuning, and the 1.6-3.6 V CMOS control interface connects directly to the SX1262 GPIO for TX/RX switching. The integrated power detector allows firmware to monitor and cap output power, which is valuable for regulatory compliance across regional 863-928 MHz allocations, and the integrated LNA improves receive sensitivity on the return path for bidirectional mesh traffic.
Recommandé
Smart Metering and AMI
Advanced metering infrastructure (AMI) in sub-GHz ISM bands demands both high transmit power for long links from basements and vaults, and ultra-low sleep current for battery-powered endpoints. The SKY66122-11 addresses both requirements: the integrated PA delivers the boosted output power needed to overcome enclosure and siting losses, while the 0.05 uA shutdown current ensures the front end adds negligible load during the multi-second to multi-minute sleep intervals typical of metering duty cycles. Its fully matched 50 ohm ports simplify the RF front-end layout inside compact meter housings, and the integrated power detector enables firmware-level TX power calibration, reducing unit-to-unit variation and easing certification across the 863-928 MHz regional band allocations.
Recommandé
Industrial IoT Telemetry and SCADA
Industrial telemetry links - tank levels, pump stations, remote I/O - commonly use proprietary FSK or LoRa modulation in the 863-928 MHz ISM band, where link distances of several kilometers and metal-rich environments demand high ERP. The SKY66122-11 provides the transmit amplification and receive LNA gain to close those links, with the PA, LNA, and TX/RX switch integrated in one 6x6 mm MCM that reduces RF layout complexity on crowded industrial control boards. The 1.6-3.6 V CMOS-compatible digital controls interface directly with industrial microcontrollers, and the power detector output supports telemetry self-test, allowing firmware to report front-end health and output power drift as part of predictive maintenance regimes in unattended field installations.
Recommandé
Street Lighting Control Networks
Sub-GHz mesh networks for street-light control rely on pole-top nodes that must cover long inter-node distances with no wired backhaul, making transmit power the dominant link-budget term. The SKY66122-11 boosts the radio's output through its integrated PA in the 863-928 MHz band, while the integrated LNA preserves uplink sensitivity from distant nodes. Its 50 ohm matched ports allow a simple direct connection to a pole-top antenna through a SAW filter, and the integrated power detector supports per-node TX power calibration to stay within regional EIRP limits. The module's 0.05 uA shutdown current matters here because lighting nodes typically transmit briefly at dusk and dawn schedules and sleep otherwise, often on limited energy-harvesting budgets.
Recommandé
High-Power ISM Band Point-to-Point Links
Point-to-point data links in the 863-928 MHz ISM band - for example, between buildings or across industrial campuses - need maximum radiated power to achieve reliable throughput at range with modest antennas. The SKY66122-11 is explicitly characterized for high-power ISM band operation per the Skyworks product page. Its integrated PA raises transceiver output to the regulatory ceiling, the power detector allows precise control of conducted power so the system can legally maximize EIRP, and the integrated LNA plus switch support bidirectional half-duplex links through a single antenna. The fully matched 50 ohm interface means the link designer can focus on filter and antenna selection rather than impedance matching at 900 MHz.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour SKY66122-11 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | SKY66112-11 | SKY66122-11T |
|---|---|---|---|
| Brand | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Frequency Range | 863 MHz to 928 MHz | 2.4 GHz (Zigbee/Thread/Bluetooth) | 863 MHz to 928 MHz |
| Target Standard | Wi-SUN, ISM band, IoT | Zigbee, Thread, Bluetooth | Wi-SUN, ISM band, IoT |
| Integrated Blocks | PA + LNA + Switch + Power Detector | PA + LNA + inter-stage matching + harmonic filter | PA + LNA + Switch + Power Detector (same die) |
| Control Voltage | 1.6 V to 3.6 V CMOS | 1.6 V to 3.6 V CMOS | 1.6 V to 3.6 V CMOS |
Principaux différenciateurs
- Sub-GHz 863-928 MHz coverage with integrated power detector (vs SKY66112-11)
- Higher integration for high-power designs (vs Discrete PA + LNA + switch chain)
- Proven in long-range mesh booster designs (vs Generic sub-GHz PAs)
Notes de conception
The SKY66122-11 is a high-power PA module in a 36-pin 6x6 mm MCM, so its bottom ground pad and ground pins must bond to a continuous, unbroken ground plane through an array of thermal vias (follow the land pattern in the official Skyworks datasheet). Poor grounding raises the ground impedance in the PA return path, degrading output power, harmonics, and EVM simultaneously. Keep the 50 ohm transmission lines from module to SAW filter and antenna as short as possible, and follow the datasheet-recommended microstrip geometry for the module's stackup assumptions.
Decouple the PA supply pin with low-ESR ceramics (typical practice: 100 pF, 100 nF, and 10 uF in parallel) placed as close to the supply pins as the land pattern allows, because PA supply current pulses at the RF envelope rate can cause rail sag that shows up as spectral re-growth. Verify the PA supply voltage range in the manufacturer datasheet before rail design; the verified data confirms only the 1.6-3.6 V CMOS control levels, not the PA rail.
Use the integrated power detector to implement closed-loop TX power control in firmware: output power of a PA module drifts with temperature and supply, and regional 863-928 MHz EIRP limits are legally binding. Calibrate the detector at production against a conducted measurement at band edges (863, 902-928 MHz), not just mid-band. Also do not leave the module enabled while the transceiver is in receive mode - the TX/RX control pins must switch the front end correctly to avoid transmitting into the LNA path.
Informations de conformité
Compliance status not stated in the verified web data; verify on the official Skyworks SKY66122-11 product page or datasheet before RoHS/REACH-mandated builds.
