STM32F072C8T6 - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics
Référence : STM32F072C8T6 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $5.4354 | $5,44 |
| 10 | $5.4354 | $54,35 |
| 100 | $5.4354 | $543,54 |
| 500 | $5.4354 | $2 717,70 |
| 1 000 | $5.4354 | $5 435,40 |
STM32F072C8T6 Présentation
The STM32F0 family consists of entry-level 32-bit RISC microcontrollers intended to provide efficient control processing, integrated communications, analog peripherals, and flexible memory options in a small surface-mount package. This hierarchy places the STM32F072C8T6 within the broader category of embedded microcontrollers, where the device executes firmware, controls peripherals, and communicates with external hardware.
Verified source data identifies a 48 MHz maximum CPU frequency, 64 KB of Flash, and a 48-LQFP package. The distributor descriptions also identify USB and CAN support as defining connectivity features. The 48-pin LQFP format provides a conventional leaded surface-mount footprint suitable for designs requiring accessible pins, compact board area, and straightforward assembly. Exact RAM size, voltage limits, peripheral details, and temperature limits are not supplied in the verified excerpts and are therefore not inferred here.
Because the device is an ARM Cortex-M0 microcontroller, software development can use the STM32 family ecosystem and embedded C toolchains. The Cortex-M0 core provides a 32-bit RISC architecture, while the STM32F072x8/xB family description from STMicroelectronics emphasizes high-performance embedded control and integrated peripherals. Toolchain and exact peripheral assignments should be confirmed against the manufacturer datasheet and reference manual for the selected board design.
Typical application areas include USB-connected control devices, CAN-connected industrial or automotive interface modules, compact sensor controllers, embedded instrumentation, and general-purpose 48 MHz embedded products. USB and CAN are especially relevant where a controller must combine local real-time processing with a standardized communications link.
Designers should verify package pin assignments, power requirements, clock configuration, decoupling, and peripheral availability against the official STM32F072C8T6 documentation before layout release. The verified data confirms the 48-LQFP 7 x 7 mm package and 48 MHz Cortex-M0 performance, but does not provide a verified pinout, recommended capacitor values, or full electrical limits.
This product record combines distributor availability information, manufacturer family positioning, interface requirements, package data, and practical selection guidance to support initial design decisions. It is intended to help engineers identify whether the STM32F072C8T6 matches the required microcontroller package, processing speed, Flash capacity, and USB/CAN feature set.
Alternatives de remplacement direct pour STM32F072C8T6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32F072C8T6 (même facteur de forme et même empreinte) — différant par Package, Core, Operating Temperature, ADC, USB.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32F071C8T6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
HK32F072C8T6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32F072C8T7
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →STM32F072CBT6
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →STM32L052C6T6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32F072C8T6 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| CPU Maximum Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Architecture | 32-bit RISC |
| Core | ARM Cortex-M0 |
| Boîtier | 48-LQFP (7 x 7 mm) |
| Communication Interface | USB and CAN |
| Series | STM32F0 |
| Type de montage | Surface mount |
| Supplier Classification | Mainstream ARM Cortex-M0 USB line MCU |
| Nombre de broches | 48 pins |
Guide de configuration des broches du STM32F072C8T6 48-lqfp (7 x 7 mm)
Configuration des broches du STM32F072C8T6 (boîtier 48-lqfp (7 x 7 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32F072C8T6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32F072C8T6 convient pour 6 applications: USB-connected embedded controller, CAN-connected industrial interface module, Compact sensor controller, Embedded instrumentation and measurement device, USB-to-CAN communication gateway, General-purpose embedded control platform.
USB-connected embedded controller
STM32F072C8T6 fits compact USB control products because the verified distributor data identifies USB support alongside a 48 MHz ARM Cortex-M0 core and 64 KB of Flash. The MCU can execute device firmware, manage local inputs and outputs, and expose a USB interface to a host computer or peripheral. Its 48-LQFP 7 x 7 mm package provides 48 accessible pins in a relatively compact footprint. Before finalizing the circuit, verify the required USB mode, power-supply requirements, pin multiplexing, decoupling, firmware stack, and current budget against the official STMicroelectronics documentation. The supplied data does not provide full USB electrical characteristics, so implementation should not rely on unverified assumptions.
Recommandé
CAN-connected industrial interface module
The STM32F072C8T6 is a plausible fit for CAN-connected industrial interfaces because verified source data identifies both CAN and a 48 MHz Cortex-M0 core. An industrial module can use the MCU for local control, status monitoring, diagnostics, and communication with a remote CAN network. The 64 KB Flash figure is suitable for firmware storage in many embedded-control designs, while the 48-LQFP package simplifies access to external memory, sensors, transceivers, and connectors. A production design must confirm the exact CAN controller and transceiver requirements, pin mapping, bus protection, termination, supply voltage, and isolation needs. Verify industrial temperature, EMC, and qualification requirements separately because they are not specified in the supplied excerpts.
Recommandé
Compact sensor controller
STM32F072C8T6 can serve as a compact sensor controller when the system needs deterministic embedded processing and flexible peripheral connectivity. The verified 48 MHz Cortex-M0 core is suitable for sampling, filtering, thresholding, calibration, and communication tasks in a small embedded product. The 64 KB Flash specification provides a defined firmware-memory baseline, while the 48-LQFP package leaves access to a broad set of I/O for sensors, indicators, and external interfaces. The design should assign analog and digital functions carefully, keep sensitive signal paths away from fast digital transitions, and follow the manufacturer’s grounding and decoupling guidance. ADC resolution, ADC accuracy, RAM, sensor interfaces, and electrical timing were not included in the verified data and must be obtained from the manufacturer documentation.
Recommandé
Embedded instrumentation and measurement device
STM32F072C8T6 is applicable to compact instrumentation where a 32-bit Cortex-M0 MCU performs measurement control, calibration, user-interface updates, and data handling. Verified data confirms a maximum 48 MHz operating frequency and USB communication capability, which can support a host-connected measurement instrument or configuration interface. The MCU’s 64 KB Flash allows a defined application and bootloader space, although the available RAM is not supplied and must be checked before sizing buffers. For analog measurement designs, use separate analog and digital supply planning, local decoupling, controlled reference routing, and short high-impedance traces. The exact ADC performance, input channels, timer resources, and analog voltage range must be confirmed from official STMicroelectronics sources before committing to an instrumentation architecture.
Recommandé
USB-to-CAN communication gateway
The STM32F072C8T6 is well aligned with a compact USB-to-CAN communication bridge because verified distributor information identifies both USB and CAN interfaces. A gateway can expose a USB connection to a host while formatting and managing frames for a CAN network, with the Cortex-M0 core handling protocol state and peripheral coordination. The 48-LQFP package provides access to communication and control pins, and the 64 KB Flash specification supports embedded gateway firmware. Engineering validation should include CAN transceiver selection, bus termination, fault protection, bus timing, USB enumeration, firmware timing margins, and connector grounding. The supplied results do not specify CAN speed, transceiver details, USB class support, or exact peripheral pin assignments, so these values must be confirmed before design release.
Recommandé
General-purpose embedded control platform
STM32F072C8T6 is useful as a general-purpose embedded control MCU when a product needs more processing capability than an 8-bit controller without requiring a larger high-end MCU. Verified data confirms a 32-bit ARM Cortex-M0 core, 48 MHz maximum frequency, 64 KB Flash, and a 48-LQFP package. These characteristics support real-time control loops, communication handling, status logic, and peripheral coordination in educational, industrial, and consumer-adjacent products. The design should use the exact manufacturer pinout and reference manual to assign alternate functions, debug signals, clocks, resets, and power pins. Because RAM, voltage range, temperature range, and detailed peripheral inventory are not present in the verified excerpts, verify them before using this part as a platform baseline.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32F072C8T6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F071C8T6 | HK32F072C8T6 | STM32F072C8T7 | STM32L052C6T6 |
|---|---|---|---|---|---|
| CPU | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit | Compatibility claimed; exact core specification not supplied | Related STM32F072C8 part; exact CPU not supplied | Related STM32L0 part; exact CPU not supplied |
| Maximum Frequency | 48 MHz | 48 MHz | Not supplied | Not supplied | Not supplied |
| Flash Memory | 64 KB | 64 KB | Not supplied | 64 KB | Not supplied |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP | 48-LQFP | 48-LQFP | 48-LQFP |
| USB | Supported | Not fully verified in supplied data | Compatibility claimed; exact support not supplied | Related STM32F072 part; exact support not supplied | Not fully verified in supplied data |
| CAN | Supported | Not fully verified in supplied data | Compatibility claimed; exact support not supplied | Related STM32F072 part; exact support not supplied | Not fully verified in supplied data |
| Brand | STMicroelectronics | STMicroelectronics | Hua Hong Semiconductor | STMicroelectronics | STMicroelectronics |
Principaux différenciateurs
- Verified USB and CAN feature positioning (vs STM32F071C8T6)
- Documented compatibility candidate (vs HK32F072C8T6)
- STMicroelectronics family support (vs STM32F072C8T7)
Notes de conception
Use the official STM32F072C8T6 electrical documentation to define the complete power-supply and decoupling network. Place required bulk and high-frequency capacitors close to the relevant power pins, maintain a low-impedance ground return, and verify the regulator’s startup and transient behavior across USB, CAN, and maximum processor activity. The supplied verified excerpts confirm 48 MHz operation and USB/CAN features but do not provide voltage limits, current limits, or manufacturer capacitor values, so these items must not be inferred.
Design the PCB around the verified 48-LQFP 7 x 7 mm package and preserve access to all required pins. Keep clock, reset, debug, USB, and communication routing deliberate, and separate sensitive analog or sensor paths from switching nodes and high-current return paths. Because the exact pinout and alternate-function matrix are not included in the verified data, freeze the layout only after checking the official STM32F072C8 documentation and the selected peripheral configuration.
Do not treat a same-package comparison part as a guaranteed replacement without checking every used pin and firmware dependency. The supplied cross-reference data specifically identifies ADC, clock, and low-power behavior as areas requiring review for HK32F072C8T6. Also verify the exact STM32F072C8T6 ordering suffix, operating-temperature grade, voltage range, USB mode, CAN timing, and toolchain support before releasing a production BOM.
Informations de conformité
Compliance information was not included in the supplied verified web excerpts. Confirm RoHS, REACH, automotive qualification, lead-free, halogen-free, and conflict-minerals status using the exact STMicroelectronics product documentation or distributor compliance records.
