STM32F446VET6TR - 180MHz Cortex-M4 512KB MCU | STMicroelectronics
Référence : STM32F446VET6TR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
STM32F446VET6TR Présentation
An Arm Cortex-M4 microcontroller combines a 32-bit RISC processor core with tightly coupled peripherals, memory, and interrupt hardware on one integrated circuit. This MCU class is designed for embedded control, real-time signal processing, communications, audio, and industrial applications. The STM32F4 family hierarchy is Cortex-M4 processor, 32-bit RISC core, embedded microcontroller, and semiconductor.
Verified features for STM32F446VET6TR include an Arm Cortex-M4 core, 180 MHz maximum frequency, 512 KB Flash, 128 KB SRAM, 81 I/Os, DSP instructions, and an FPU. STMicroelectronics describes the STM32F446 family as offering 225 DMIPS and enhanced connectivity through dual Quad-SPI, SDRAM, and audio interfaces. The 100-LQFP package provides a substantial pin count for external memory, communication peripherals, and mixed-signal control systems.
The STM32F446 architecture is suited to applications that need more compute performance than general-purpose Cortex-M devices without moving to a higher-complexity microcontroller architecture. Its DSP and FPU resources can accelerate filter, control, and floating-point workloads, while the 512 KB Flash and 128 KB SRAM provide local storage for firmware and working data. Exact electrical limits, peripherals, pin names, and timing values must be taken from the manufacturer datasheet before hardware release.
Typical applications include industrial automation, audio and digital signal processing, communications infrastructure, motor and motion control, test and measurement, and connected embedded equipment. The 180 MHz operating rate and integrated memory make the MCU useful for real-time control tasks, while the 81 I/Os support sensors, actuators, displays, transceivers, and external peripheral devices.
A key design consideration is package-level planning: the 100-LQFP footprint requires careful routing of power, ground, high-speed signals, and decoupling. Firmware compatibility also depends on exact peripheral configuration, clock setup, startup sequence, pin multiplexing, and memory initialization; a same-family or pin-compatible designation alone does not guarantee a complete firmware drop-in replacement.
This product page combines verified manufacturer and distributor information with package, purchasing, comparison, and design guidance. Pricing and availability should be checked against the cited distributor listings as of 2026-10-22 before committing a production BOM.
Alternatives de remplacement direct pour STM32F446VET6TR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32F446VET6TR (même facteur de forme et même empreinte) — différant par Package, Flash Memory, SRAM, Operating Temperature, Communication Interfaces.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32F446VET6
✅ Remplacement direct✓ En stock
$3.6486 / unité
Voir la fiche technique →STM32F446VCT6TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$18.3074 / unité
Voir la fiche technique →STM32F446RET6TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$13.6826 / unité
Voir la fiche technique →STM32F405VGT6TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8.1 / unité
Voir la fiche technique →STM32F429VGT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$10.85 / unité
Voir la fiche technique →STM32F446VET6TR Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum Operating Frequency | 180 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| General-Purpose I/O | 81 I/Os |
| DSP Support | DSP instructions |
| FPU | Floating-point unit |
| Performance | 225 DMIPS |
| Boîtier | 100-LQFP (14 x 14 mm) |
| Type de montage | Surface mount |
| Core Family | STM32F4 |
| Connectivity Features | Dual Quad-SPI, SDRAM, and audio interfaces |
| Development Ecosystem | STM32 development boards, embedded software, and support |
Guide de configuration des broches du STM32F446VET6TR 100-lqfp (14 x 14 mm)
Configuration des broches du STM32F446VET6TR (boîtier 100-lqfp (14 x 14 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32F446VET6TR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32F446VET6TR convient pour 6 applications: Industrial Automation Controller, Audio Signal Processing, Real-Time Motor and Motion Control, Communications Gateway, Test and Measurement Instrument, Embedded Data Acquisition System.
Industrial Automation Controller
STM32F446VET6TR fits an industrial controller that needs deterministic real-time computation alongside substantial local memory. Its verified 180 MHz Cortex-M4 core, 512 KB Flash, 128 KB SRAM, 81 I/Os, DSP instructions, and FPU provide resources for sensor sampling, digital filtering, state-machine control, communications, and actuator sequencing. The 100-LQFP 14 x 14 mm package provides a practical route to connect external sensors, drivers, communications transceivers, and status indicators without moving immediately to a larger package. The main design check is not performance alone: confirm the exact peripheral instances, electrical limits, clock tree, ESD protection, and environmental requirements in the manufacturer documentation.
Recommandé
Audio Signal Processing
STM32F446VET6TR is suitable for audio signal-processing subsystems because the verified Cortex-M4 implementation includes DSP instructions, an FPU, 180 MHz maximum frequency, and 512 KB Flash with 128 KB SRAM. Those resources can support digital filters, mixing, effects, buffer management, control loops, and communication with a codec or digital audio interface. STMicroelectronics identifies audio interfaces as part of the STM32F446 family capability set, making the device more relevant than a basic general-purpose MCU for real-time audio workloads. Actual suitability depends on required sample rate, channel count, latency, DMA behavior, memory footprint, clock accuracy, and analog front-end performance; these details must be validated in the target system.
Recommandé
Real-Time Motor and Motion Control
STM32F446VET6TR provides a strong compute platform for motor-control and motion-control systems that combine fast control calculations with external sensing and power-stage interfaces. The 180 MHz Cortex-M4 core and FPU can execute control loops and filtering, while the DSP instructions support common numerical operations. Its verified 81 I/Os and 100-LQFP package offer access to encoders, position sensors, PWM outputs, capture inputs, communications, and protection signals. The MCU is not a replacement for a dedicated gate driver or power stage, so the complete design must account for current sensing, timing margins, fault shutdown, isolation, thermal conditions, and safe-state behavior. Verify PWM, timer, ADC, and pin multiplexing details directly in the STM32F446 documentation.
Recommandé
Communications Gateway
STM32F446VET6TR can serve as the host processor in a communications gateway when the design needs local protocol handling, buffering, and real-time scheduling. Its verified Cortex-M4 core at 180 MHz, 512 KB Flash, and 128 KB SRAM provide capacity for firmware, protocol state, and data buffers, while the STM32F446 family is described as including dual Quad-SPI, SDRAM, and audio interfaces. The LQFP package can expose multiple serial, timer, debug, and general-purpose signals, although exact alternate-function availability must be checked against the package pinout. A production gateway design must separately verify transceiver interface voltage levels, protocol timing, DMA or cache effects, watchdog behavior, boot loading, cybersecurity requirements, and long-term component availability.
Recommandé
Test and Measurement Instrument
STM32F446VET6TR is a plausible controller for test and measurement equipment requiring precise sequencing, data acquisition, user-interface control, and communication. Its verified 180 MHz Cortex-M4 performance, DSP and FPU support, 512 KB Flash, 128 KB SRAM, and 81 I/Os allow the firmware to combine control logic with measurement processing and instrument communication. The 100-LQFP package offers enough external connectivity for sensors, display interfaces, USB or Ethernet transceivers, relays, and precision analog front ends. Measurement accuracy will depend mainly on the external signal chain, ADC architecture, reference quality, analog layout, calibration, and timing budget; the MCU itself does not establish measurement precision. Check the exact ADC, timer, DMA, and pin capabilities before selecting it.
Recommandé
Embedded Data Acquisition System
STM32F446VET6TR can support embedded data-acquisition systems that collect sensor information, execute filtering, and forward results through a local communications link. The 180 MHz Cortex-M4 core and DSP instructions are useful for time-critical sampling and digital signal conditioning, while the 512 KB Flash and 128 KB SRAM support firmware, calibration data, and short working buffers. The 81 verified I/Os provide a broad interface surface for sensor inputs, trigger signals, status LEDs, storage devices, and communications transceivers. For a production design, confirm the number and speed of usable timer, ADC, DMA, and serial resources; isolate analog and digital grounds appropriately; and budget memory for buffering. External SDRAM or storage may be needed for long captures.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32F446VET6TR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F446VET6 | STM32F446VCT6TR | STM32F446RET6TR | STM32F405VGT6TR | STM32F429VGT6 |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) - requires verification | 100-LQFP (14 x 14 mm) - requires verification | 100-LQFP (14 x 14 mm) - requires verification | 100-LQFP (14 x 14 mm) - requires verification |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
Principaux différenciateurs
- Higher verified compute performance than lower-speed general-purpose alternatives (vs STM32F411RET6TR)
- Larger verified memory resources (vs STM32F407VET6TR)
- Broad verified external interface capacity (vs STM32F429VGT6)
Notes de conception
Use the STM32F446VET6TR datasheet for the exact supply-voltage range, I/O limits, startup sequence, and decoupling requirements; those values are not present in the supplied snippets. Place the required input and output bypass capacitors immediately beside their associated power pins, keep high-current return paths short, and provide clean connections for analog and digital sections where applicable. Check startup and peripheral-load current against the selected regulator before layout release.
The 100-LQFP package has a 0.5 mm class fine-pitch footprint and requires careful fanout, solder-mask design, and assembly planning. Confirm land pattern dimensions from the manufacturer package drawing rather than relying on a generic LQFP footprint. Route oscillator, reset, boot, debug, and high-speed communications signals with short paths and continuous references to the appropriate ground plane. Validate the PCB with the selected assembler because pad length, solder mask, and paste volume can affect yield.
Do not treat a Cortex-M4 label or an LQFP-100 outline as proof of drop-in compatibility. For any substitute, compare pin-by-pin alternate functions, power pins, clock pins, reset and boot behavior, flash and SRAM capacity, peripheral instances, timer mappings, and required firmware initialization. The verified data confirms the STM32F446VET6TR package and core resources but does not provide a complete pin table, so schematic and firmware reviews remain mandatory.
Separate noisy switching or high-current paths from sensitive analog inputs and communication lines. Use a deliberate grounding strategy, keep decoupling return loops compact, and place protection components where their transient current will be diverted through a short, low-impedance path. If the MCU drives external sensors, displays, or transceivers, inspect signal direction and voltage compatibility against the exact alternate-function pin selected in the STM32F446 device documentation.
Informations de conformité
The supplied verified data does not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. No compliance claim is inferred from the STM32F4 family name. Obtain current material and qualification declarations from STMicroelectronics for the exact ordering code.