STM32F765IIT6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
Référence : STM32F765IIT6 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $14.7006 | $14,70 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
STM32F765IIT6 Présentation
A microcontroller is a programmable system-on-chip that executes firmware, reads sensor and user inputs, controls outputs, and manages communications. The STM32F7 series sits within the hierarchy microcontroller → 32-bit microcontroller → Arm Cortex-M MCU → STM32F7 high-performance MCU. This device is suited to applications requiring substantially more processing capability than basic 8-bit or low-cost Cortex-M controllers while retaining the ecosystem and software model associated with Arm Cortex-M devices.
The verified product information identifies an Arm Cortex-M7 core, a maximum operating frequency of 216 MHz, and 2 MB of Flash organized as 2M × 8. The STM32F765xx family is described by STMicroelectronics as a high-performance Cortex-M7 platform. These headline values support responsive control loops, connected embedded products, and signal-processing workloads where CPU throughput and program storage are important selection criteria.
The STM32F765IIT6 is identified specifically as a 176-LQFP package measuring 24 mm × 24 mm. This large leaded package provides 176 external connection points and is suitable for prototypes, industrial controllers, and equipment where fine-pitch BGA assembly is undesirable. Exact pin functions, electrical limits, memory-map details, and peripheral configurations must be checked against the manufacturer datasheet before final PCB design.
Typical uses include industrial automation, motor and motion control, communications equipment, instrumentation, human-interface systems, and connected embedded products. At 216 MHz, the device can process firmware concurrently with communications and control tasks, while its 2 MB Flash capacity provides room for larger application code. Because detailed peripheral and timing specifications were not included in the verified search data, they should not be inferred without reviewing the official datasheet.
A practical design begins with the STMicroelectronics STM32F765xx datasheet, followed by the device reference manual, pin definitions, electrical characteristics, and package drawing. Confirm the exact suffix temperature range and ordering information, preserve all required power and decoupling connections, and validate the 176-pin land pattern against the official package drawing. Do not substitute another STM32F7 member solely because it uses Cortex-M7; Flash size, pinout, peripheral mix, and qualification must match.
This page consolidates the verified manufacturer and distributor facts for STM32F765IIT6, including the 216 MHz Cortex-M7 core, 2 MB Flash, 176-LQFP package, source links, and design considerations. It is intended to accelerate engineering discovery, but the manufacturer datasheet remains the authoritative source for release timing, electrical limits, and production details.
Alternatives de remplacement direct pour STM32F765IIT6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32F765IIT6
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →STM32F765IIT6 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit microcontroller IC |
| Processor Core | Arm Cortex-M7 |
| Instruction Architecture | 32-bit RISC |
| Maximum CPU Frequency | 216 MHz |
| Flash Memory | 2 MB (2M × 8) |
| Device Series | STM32F7 |
| Boîtier | 176-LQFP |
| Package Dimensions | 24 mm × 24 mm |
| Nombre de broches | 176 pins |
| Type de montage | Surface mount |
| Core Architecture | High-performance Arm Cortex-M7 MCU+FPU family |
| Nominal Supply Voltage | 3.3 V |
Guide de configuration des broches du STM32F765IIT6 24 mm × 24 mm
Configuration des broches du STM32F765IIT6 (boîtier 24 mm × 24 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32F765IIT6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32F765IIT6 convient pour 6 applications: Industrial Automation Controller, Motor and Motion Control, Communications Gateway, Test and Measurement Instrument, Human-Machine Interface, Data Acquisition and Embedded Logging.
Industrial Automation Controller
STM32F765IIT6 fits an industrial controller that combines control logic, communications, and supervisory firmware. Its verified 216 MHz Arm Cortex-M7 core provides substantial throughput, while 2 MB of Flash creates room for a larger application than many basic controllers. The 176-LQFP package exposes a high pin count for sensors, actuators, and interface electronics. Before committing to the design, verify the exact timers, I/O ratings, communication peripherals, and 3.3 V power requirements against the official manufacturer datasheet.
Recommandé
Motor and Motion Control
The STM32F765IIT6 is a candidate for motion-control systems requiring a faster control processor and more code storage than entry-level MCUs. Its 216 MHz Cortex-M7 performance can support complex control algorithms and responsive peripheral servicing, while 2 MB of Flash accommodates application code, configuration, and boot logic. The verified data does not specify PWM channels, encoder interfaces, or timer synchronization, so those functions must be confirmed in the STM32F765xx documentation before selecting the exact device for a motor drive.
Recommandé
Communications Gateway
STM32F765IIT6 can serve as the processing center of a communications gateway when firmware must combine protocol handling, data buffering, and local control. Its verified 216 MHz Cortex-M7 core offers more compute margin than low-speed microcontroller families, and the 2 MB Flash capacity supports larger protocol and management components. The 176-LQFP package provides extensive routing options, but verified Ethernet, USB, UART, and other interface details were not included in the supplied excerpts and must be checked directly against the manufacturer datasheet.
Recommandé
Test and Measurement Instrument
The STM32F765IIT6 is appropriate for an embedded measurement instrument where display handling, acquisition coordination, communications, and user-interface code must coexist. A 216 MHz Cortex-M7 core provides processing headroom, and 2 MB of Flash allows a more capable firmware image than smaller general-purpose MCUs. Its 176-LQFP package is also convenient for prototypes because it avoids requiring a compact BGA assembly process. Exact analog channels, ADC performance, DAC resources, and timing accuracy remain to be verified from the official documentation.
Recommandé
Human-Machine Interface
STM32F765IIT6 can support a graphical or networked human-machine interface by combining application firmware, communications, and control logic in one 216 MHz Cortex-M7 processor. Its verified 2 MB Flash capacity is useful for menu structures, protocol stacks, and asset data, while the large 176-LQFP package offers many external signal options. Display timing, SDRAM, external graphics, and touch-controller requirements are not stated in the verified data, so engineers should validate board resources and firmware support before finalizing the display architecture.
Recommandé
Data Acquisition and Embedded Logging
STM32F765IIT6 is a plausible controller for embedded data-acquisition systems that must sample, process, and transfer information locally. Its 216 MHz Cortex-M7 core offers enough performance for control and buffering tasks, while 2 MB of Flash can store firmware and configuration data. The 176-LQFP package exposes numerous I/O pins for sensors and storage interfaces. Because the verified excerpts do not specify ADC counts, memory interfaces, or supported communication peripherals, the final signal chain must be mapped directly to the official STM32F765xx pin and peripheral tables.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32F765IIT6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F765IIT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 176-LQFP | 176-LQFP |
| Processor Core | Arm Cortex-M7 | Arm Cortex-M7 |
| Maximum CPU Frequency | 216 MHz | 216 MHz |
| Flash Memory | 2 MB (2M × 8) | 2 MB (2M × 8) |
| Architecture | 32-bit RISC | 32-bit RISC |
| Package Dimensions | 24 mm × 24 mm | 24 mm × 24 mm |
| Pin Count | 176 pins | 176 pins |
Principaux différenciateurs
- High verified CPU frequency (vs STM32F765IIT6 candidate alternatives were not verified)
- Large verified program-memory capacity (vs STM32F765IIT6 candidate alternatives were not verified)
- Accessible 176-LQFP package (vs STM32F765IIT6 candidate alternatives were not verified)
Notes de conception
Use the official STM32F765xx package drawing to create the 176-LQFP land pattern and verify it against the distributor-confirmed 24 mm × 24 mm body. The supplied data does not provide pad dimensions, courtyard limits, pin numbering, or exposed-pad details, so those values must not be inferred. Check every signal against the manufacturer pin table before routing, especially power, reset, clock, debug, and communication pins.
The verified distributor description identifies the part as a 3.3 V MCU, but it does not provide the complete voltage tolerances, I/O limits, regulator sequencing requirements, or decoupling values. Before powering the board, obtain the electrical characteristics from the STMicroelectronics datasheet and design the supply for the worst-case load and startup sequence. Do not assume that a nominal 3.3 V rail alone satisfies all analog, digital, and external-interface requirements.
Treat clock, high-speed memory, and communication routes as constrained signals after confirming their functions in the datasheet. Keep traces short where possible, provide a continuous return path, and place bypass and termination networks according to the manufacturer recommendations for the selected operating mode. Because the verified data does not list GPIO drive strength, edge-rate limits, external-memory topology, or peripheral pin assignments, those details require document-level review.
Informations de conformité
Compliance claims were not present in the supplied verified search data. The product page, datasheet, and distributor records should be checked for the exact order code and applicable declarations.
