STM32H742VGT6 - 480MHz Cortex-M7 MCU | STMicroelectronics
Référence : STM32H742VGT6 ✓ ActifSTM32H742VGT6 Présentation
An Arm Cortex-M7 microcontroller is a 32-bit RISC processor optimized for real-time embedded applications. It belongs to the microcontroller hierarchy, combining a CPU core, embedded Flash, SRAM, communication peripherals, analog interfaces, and timing resources on one package. The STM32H742VGT6 also uses double-precision floating-point hardware, accelerating scientific calculations, digital filtering, control algorithms, and DSP workloads without software-emulated arithmetic.
The principal performance features include 480 MHz maximum CPU frequency, 1 MB of program Flash, 692 KB of SRAM, and separate 16 KB instruction and data caches. According to the STM32H742 product page, the processor achieves 2424 CoreMark and 1027 DMIPS when executing from Flash with zero-wait-state operation through the L1 cache. These characteristics support responsive real-time control without moving critical code into external memory.
The STM32H7 architecture combines high-speed internal buses, dedicated cache paths, and external-memory interfaces for high-bandwidth data movement. Its 32-bit architecture supports a wider address space than an 8- or 16-bit controller, while the Cortex-M7 pipeline and hardware floating-point unit improve the execution rate of matrix, filtering, and motor-control workloads. Designers should still verify memory-bandwidth requirements when using external SDRAM, flash, or framebuffer devices.
Typical applications include industrial automation controllers, real-time communications equipment, motor and motion control, professional audio, test and measurement systems, and high-resolution human-machine interfaces. The 1 MB Flash capacity is useful for substantial boot code, application firmware, and configuration data, while 692 KB of SRAM supports buffers, protocol stacks, DSP working sets, and display framebuffer management.
PCB implementation requires careful attention to high-speed clock and memory routing. Follow the manufacturer package, power, decoupling, and layout recommendations in the STM32H742 documentation. In particular, place decoupling capacitors at the supply pins, route clocks over continuous reference planes, and use controlled-impedance routing for external memory and high-speed communication interfaces.
This product record combines the STM32H742 manufacturer specifications, package information, sourcing observations, and engineering guidance. It also distinguishes direct same-family hardware alternatives from broader functional MCU substitutions, helping designers make a package-compatible decision while recognizing that firmware, peripheral-equivalence, qualification, and lifecycle checks remain essential.
Alternatives de remplacement direct pour STM32H742VGT6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32H742VGT6 (même facteur de forme et même empreinte) — différant par Package, Flash Memory, SRAM, ADC Resolution, Communication Interfaces.
STM32H743VGT6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32H750VGT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32H753VGT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32H723VGT6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32H725VGT6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32H742VGT6 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit Arm Cortex-M7 microcontroller |
| Maximum CPU Frequency | 480 MHz |
| CPU Architecture | 32-bit RISC |
| Floating-Point Unit | Double-precision FPU |
| Program Flash | 1 MB |
| SRAM | 692 KB |
| Instruction Cache | 16 KB |
| Data Cache | 16 KB |
| CoreMark Performance | 2424 CoreMark |
| DMIPS Performance | 1027 DMIPS |
| Boîtier | 100-pin LQFP, 14 x 14 mm |
| Type de montage | Surface mount |
| Core | Arm Cortex-M7 |
| External Memory Interface | Present |
| Supported Supply Levels | 1.8 V, 2.5 V, and 3.3 V |
| ADC Resolution | 12-bit and 16-bit |
Guide de configuration des broches du STM32H742VGT6 100-pin lqfp, 14 x 14 mm
Configuration des broches du STM32H742VGT6 (boîtier 100-pin lqfp, 14 x 14 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32H742VGT6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32H742VGT6 convient pour 6 applications: Industrial Automation Controller, High-Speed Data Acquisition, Motor and Motion Control, Professional Audio and DSP, Communications Gateway, Human-Machine Interface Controller.
Industrial Automation Controller
The STM32H742VGT6 fits an industrial controller that combines fast loop control with Ethernet-class communications, data acquisition, and local storage. Its 480 MHz Cortex-M7 core and double-precision FPU can execute filtering and control calculations, while 692 KB of SRAM accommodates protocol buffers and working data. The 1 MB Flash holds application firmware, a boot loader, and configuration logic. External SDRAM can be added when the application requires larger acquisition or display buffers. Engineers should partition slow and real-time tasks carefully, validate the industrial temperature grade, and preserve deterministic bus access for high-priority control traffic.
Recommandé
High-Speed Data Acquisition
The STM32H742VGT6 is suitable for signal-chain control where sampling, filtering, buffering, and communication must operate concurrently. The 480 MHz Cortex-M7 core provides instruction throughput for digital signal processing, while the 16 KB instruction cache and 16 KB data cache improve execution from Flash and reduce bus stalls. With 692 KB of SRAM, the design can hold sizable sample windows and protocol state without immediate external-memory access. Use the ADC and DMA resources according to the reference manual, and confirm acquisition bandwidth against memory and peripheral timing when the sample rate rises.
Recommandé
Motor and Motion Control
The STM32H742VGT6 can serve as the central processor in a motor-control system requiring deterministic computation alongside communications and diagnostics. Its 480 MHz Cortex-M7 core and hardware double-precision FPU support current-loop calculations, observers, transforms, and filtering, while 692 KB of SRAM is available for control state and logging. The microcontroller's external-memory interface can support larger data structures where required. Validate PWM synchronization, analog-interface accuracy, update latency, and fault-handling behavior in the final power stage; high processing speed alone does not establish control-loop accuracy.
Recommandé
Professional Audio and DSP
The STM32H742VGT6 fits professional audio processing, mixing, or interface applications where filtering, matrix operations, and low-latency data movement benefit from a high-performance 32-bit core. Its double-precision FPU accelerates transform and filter calculations, while the 1 MB Flash can hold a substantial real-time application. The 692 KB SRAM allows multiple audio buffers and working sets, and the external-memory interface can extend capacity for larger PCM streams. Audio designs should use the supported high-speed peripherals and DMA channels, isolate sensitive clocking, and verify sustained throughput without input or output buffer overruns.
Recommandé
Communications Gateway
The STM32H742VGT6 is well matched to a communications gateway that terminates one or more high-speed links and translates data for an embedded control system. Its 480 MHz core can service packet processing, compression, cryptography overhead, and protocol-state management, while 692 KB of SRAM supports queues and routing tables. External memory can be introduced for larger frame buffers or logging. The key design consideration is sustained I/O throughput: confirm that the selected Ethernet or serial peripherals, DMA channels, memory bus, and cache configuration avoid contention and maintain deterministic packet latency.
Recommandé
Human-Machine Interface Controller
The STM32H742VGT6 can act as the central controller in an advanced display, touch interface, or industrial human-machine interface. The high-performance Cortex-M7 core handles graphics acceleration support, input handling, communications, and application logic, while 692 KB of SRAM provides space for framebuffer management and interface state. Its external-memory interface allows a larger framebuffer to be connected when required, and 1 MB of Flash accommodates the application and graphics resources. Designers should optimize DMA transfers, avoid cache coherency surprises, and validate display timing against the selected panel interface.
Recommandé
Données de référence d'ingénierie pour STM32H742VGT6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32H743VGT6 | STM32H750VGT6 | STM32H753VGT6 | STM32H723VGT6 | STM32H725VGT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-pin LQFP, 14 x 14 mm | 100-pin LQFP, 14 x 14 mm | 100-pin LQFP, 14 x 14 mm | 100-pin LQFP, 14 x 14 mm | 100-pin LQFP, 14 x 14 mm | 100-pin LQFP, 14 x 14 mm |
| CPU Core | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Maximum CPU Frequency | 480 MHz | 480 MHz | 480 MHz | 480 MHz | 480 MHz | 480 MHz |
| Program Flash | 1 MB | 2 MB | 2 MB | 2 MB | 552 KB | 512 KB |
| SRAM | 692 KB | 1 MB | 1 MB | 1 MB | 564 KB | 564 KB |
| Instruction Cache | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Data Cache | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Floating-Point Unit | Double-precision FPU | Double-precision FPU | Double-precision FPU | Double-precision FPU | Double-precision FPU | Double-precision FPU |
| External Memory Interface | Present | Present | Present | Present | Present | Present |
Principaux différenciateurs
- Matches the 1 MB Flash configuration with 692 KB of SRAM and the 480 MHz Cortex-M7 performance class (vs STM32H723VGT6)
- Avoids the unnecessary 1 MB Flash expansion of the higher-memory STM32H7 options (vs STM32H743VGT6)
- Maintains a leaded, inspectable 100-pin LQFP footprint for assembly and inspection (vs STM32H753VGT6)
- Combines 480 MHz execution with a double-precision FPU and separate 16 KB caches (vs STM32H725VGT6)
Notes de conception
Implement the complete power tree from the manufacturer reference circuit, including the required internal and external supply rails, decoupling capacitors, startup sequencing, and power-supervisor or reset strategy. Place each decoupling capacitor directly beside its associated supply pin and keep high-current return paths short. The listed 1.8 V, 2.5 V, and 3.3 V supply levels must be mapped to the correct rail and I/O domain rather than applied generically to every supply pin.
Route clocks and external-memory signals over continuous reference planes with controlled impedance and avoid splits or stubs. Keep sensitive analog and oscillator paths away from high-speed memory and switching nodes. Because the Cortex-M7 can execute from Flash at zero wait states through L1 cache, placement of hot code and data can materially affect timing; benchmark the actual linker map and use the manufacturer's memory-access recommendations before increasing the operating frequency.
Treat external-memory, Ethernet, and other high-speed interfaces as constrained channels rather than general-purpose routing. Match trace lengths where the peripheral requires it, observe the documented reference-impedance values, provide the recommended termination, and keep return paths continuous. Verify setup and hold margins with the actual board stack-up and external-device timing. Cache-line placement and DMA ownership also require validation to prevent stale-data effects.
Do not assume that another STM32H7 in the LQFP-100 package is firmware-compatible without checking its memory map, clock configuration, pin multiplexing, and peripheral instance set. Update the linker script and startup configuration for the selected memory sizes, then regression-test every interrupt, communication peripheral, and boot path. Also verify the exact temperature grade, ordering suffix, and package documentation before committing a replacement to production.
Informations de conformité
The available manufacturer and distributor listing information does not state the requested compliance or material-status values. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations using the current manufacturer product documentation or declaration of compliance.