STM32U073RCT6 - Ultra-Low-Power Arm Cortex-M0+ MCU | STMicroelectronics
Référence : STM32U073RCT6 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.85 | $4,85 |
| 10 | $4.36 | $43,60 |
| 100 | $3.88 | $388,00 |
| 500 | $3.49 | $1 745,00 |
| 1 000 | $3.1 | $3 100,00 |
STM32U073RCT6 Présentation
What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of embedded systems, enabling control, monitoring, and communication in devices ranging from consumer electronics to industrial automation. The STM32U073RCT6 belongs to the STM32U0 series, which is part of the broader STM32 family of 32-bit microcontrollers known for their performance, efficiency, and extensive peripheral integration.
Key features of the STM32U073RCT6 include an ultra-low-power mode with a typical current consumption of 1.6 µA in standby mode, making it ideal for battery-operated devices. It integrates a 12-bit ADC with up to 16 channels, multiple timers, and a wide range of communication interfaces including I2C, SPI, USART, and LPUART. The device also supports USB 2.0 full-speed device mode, which is essential for many portable applications. The operating voltage range is from 1.65V to 3.6V, allowing flexible power supply design.
From a technical perspective, the STM32U073RCT6 leverages a 90nm process technology that balances performance and power consumption. The Cortex-M0+ core is optimized for low-power operation, and the device includes a flexible power management unit with multiple low-power modes (Sleep, Stop, Standby) to minimize energy usage. The flash memory supports read-while-write, enabling firmware updates without halting the system. The device also includes a hardware cryptographic accelerator for AES-128/256, enhancing security for IoT applications.
Typical applications include smart meters, portable medical devices, IoT sensors, and wearable electronics. The ultra-low-power consumption and rich peripheral set make it suitable for applications that require long battery life and reliable operation. For instance, in a smart meter, the STM32U073RCT6 can handle data acquisition, processing, and communication while maintaining low power consumption.
When designing with this device, it is crucial to pay attention to the power supply decoupling and the layout of the crystal oscillator. Use a 1µF and 100nF capacitor close to each VDD pin, and place the crystal and its load capacitors as close as possible to the OSC pins to ensure stable clock generation. Additionally, configure the GPIO pins appropriately to avoid floating inputs, which can increase power consumption.
Alternatives de remplacement direct pour STM32U073RCT6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32U073RBT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32U073RCT7
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32U073RCT6TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
GD32F303RCT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
APM32F103RCT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32U073RCT6 Valeurs maximales et caractéristiques électriques
| Core | Arm Cortex-M0+ |
| Maximum Frequency | 56 MHz |
| Flash Memory | 256 KB |
| SRAM | 40 KB |
| Boîtier | 64-LQFP (10x10 mm) |
| Operating Voltage | 1.65 V to 3.6 V |
| Standby Current | 1.6 µA (typical) |
| ADC | 12-bit, up to 16 channels |
| Communication Interfaces | I2C, SPI, USART, LPUART |
| USB | USB 2.0 full-speed device |
| Temperature Range | -40 °C to 85/125 °C |
| VBAT Mode Current | 130 nA (with RTC and 9 x 32-bit backup registers) |
| Process Technology | 90 nm |
| Cryptographic Accelerator | AES-128/256 |
| Type de montage | Surface Mount |
Configuration des broches de STM32U073RCT6
| Broche 1 | VBAT — Backup power supply for RTC and backup registers |
| Broche 2 | PC13 — GPIO or RTC output |
| Broche 3 | PC14 — GPIO or OSC32_IN |
| Broche 4 | PC15 — GPIO or OSC32_OUT |
| Broche 5 | PF0 — GPIO |
| Broche 6 | PF1 — GPIO |
| Broche 7 | NRST — Reset (active low) |
| Broche 8 | VDD — Digital power supply |
| Broche 9 | VSS — Ground |
| Broche 10 | PA0 — GPIO or ADC input |
| Broche 11 | PA1 — GPIO or ADC input |
| Broche 12 | PA2 — GPIO or USART2_TX |
| Broche 13 | PA3 — GPIO or USART2_RX |
| Broche 14 | PA4 — GPIO or SPI1_NSS |
| Broche 15 | PA5 — GPIO or SPI1_SCK |
| Broche 16 | PA6 — GPIO or SPI1_MISO |
| Broche 17 | PA7 — GPIO or SPI1_MOSI |
| Broche 18 | PB0 — GPIO or ADC input |
| Broche 19 | PB1 — GPIO or ADC input |
| Broche 20 | PB2 — GPIO |
| Broche 21 | PB10 — GPIO or I2C2_SCL |
| Broche 22 | PB11 — GPIO or I2C2_SDA |
| Broche 23 | PB12 — GPIO or SPI2_NSS |
| Broche 24 | PB13 — GPIO or SPI2_SCK |
| Broche 25 | PB14 — GPIO or SPI2_MISO |
| Broche 26 | PB15 — GPIO or SPI2_MOSI |
| Broche 27 | PC6 — GPIO or USART6_TX |
| Broche 28 | PC7 — GPIO or USART6_RX |
| Broche 29 | PC8 — GPIO |
| Broche 30 | PC9 — GPIO |
| Broche 31 | PA8 — GPIO or USB_DP |
| Broche 32 | PA9 — GPIO or USB_DM |
| Broche 33 | PA10 — GPIO or USART1_RX |
| Broche 34 | PA11 — GPIO or USART1_CTS |
| Broche 35 | PA12 — GPIO or USART1_RTS |
| Broche 36 | PA13 — GPIO or SWDIO |
| Broche 37 | PA14 — GPIO or SWCLK |
| Broche 38 | PA15 — GPIO or JTDI |
| Broche 39 | PB3 — GPIO or JTDO |
| Broche 40 | PB4 — GPIO or NJTRST |
| Broche 41 | PB5 — GPIO or I2C1_SMBA |
| Broche 42 | PB6 — GPIO or I2C1_SCL |
| Broche 43 | PB7 — GPIO or I2C1_SDA |
| Broche 44 | BOOT0 — Boot mode selection |
| Broche 45 | PB8 — GPIO or I2C1_SCL |
| Broche 46 | PB9 — GPIO or I2C1_SDA |
| Broche 47 | VDD — Digital power supply |
| Broche 48 | VSS — Ground |
| Broche 49 | PC0 — GPIO or ADC input |
| Broche 50 | PC1 — GPIO or ADC input |
| Broche 51 | PC2 — GPIO or ADC input |
| Broche 52 | PC3 — GPIO or ADC input |
| Broche 53 | PC4 — GPIO or ADC input |
| Broche 54 | PC5 — GPIO or ADC input |
| Broche 55 | PD2 — GPIO |
| Broche 56 | VDD — Digital power supply |
| Broche 57 | VSS — Ground |
| Broche 58 | PH0 — GPIO or OSC_IN |
| Broche 59 | PH1 — GPIO or OSC_OUT |
| Broche 60 | VDD — Digital power supply |
| Broche 61 | VSS — Ground |
| Broche 62 | PC10 — GPIO or USART4_TX |
| Broche 63 | PC11 — GPIO or USART4_RX |
| Broche 64 | PC12 — GPIO or USART5_TX |
Applications typiques
STM32U073RCT6 convient pour 6 applications: Smart Meters, Portable Medical Devices, IoT Sensors, Wearable Electronics, Industrial Automation, Consumer Electronics.
Smart Meters
The STM32U073RCT6 is ideal for smart meters due to its ultra-low power consumption, rich peripheral set, and support for multiple communication interfaces. It can handle data acquisition, processing, and communication while maintaining low power consumption. The 12-bit ADC and multiple timers enable accurate measurement of energy consumption, while the USART and LPUART interfaces allow connectivity to communication modules. The device's low standby current ensures long battery life in battery-powered meters, and its wide operating voltage range accommodates various power supply configurations.
Recommandé
Portable Medical Devices
The STM32U073RCT6 is well-suited for portable medical devices such as glucose monitors, pulse oximeters, and wearable health trackers. Its ultra-low power consumption extends battery life, critical for continuous monitoring. The device's 12-bit ADC can interface with various sensors, and its I2C and SPI interfaces support communication with external sensor modules. The USB 2.0 full-speed interface enables data transfer to a host device for analysis. The small LQFP64 package allows compact device designs, and the wide temperature range ensures reliable operation in clinical environments.
Recommandé
IoT Sensors
The STM32U073RCT6 is an excellent choice for IoT sensors that require long battery life and reliable wireless connectivity. Its ultra-low standby current of 1.6 µA allows sensors to remain in sleep mode for extended periods, waking only to take measurements and transmit data. The device supports multiple communication interfaces, including LPUART and SPI, which can interface with LoRa, Sigfox, or BLE modules. The hardware AES accelerator provides secure communication, essential for IoT applications. The wide operating voltage range allows direct battery operation, simplifying power supply design.
Recommandé
Wearable Electronics
The STM32U073RCT6 is ideal for wearable electronics such as fitness trackers, smartwatches, and smart clothing. Its ultra-low power consumption and small package size make it perfect for space-constrained designs. The device's low-power modes, including standby current of 1.6 µA, enable extended battery life, which is critical for wearables. The integrated USB 2.0 full-speed interface allows for easy charging and data synchronization. The 12-bit ADC can interface with various sensors, such as accelerometers and heart-rate monitors, while the I2C and SPI interfaces support communication with peripheral sensors.
Recommandé
Industrial Automation
The STM32U073RCT6 is suitable for industrial automation applications such as sensor nodes, motor control, and process monitoring. Its wide operating temperature range (-40°C to 125°C) ensures reliable operation in harsh industrial environments. The device's multiple timers and PWM outputs enable precise motor control, while the 12-bit ADC can interface with various industrial sensors. The USART and SPI interfaces support communication with industrial networks such as Modbus. The device's low power consumption is beneficial for remote sensor nodes powered by batteries or energy harvesting.
Recommandé
Consumer Electronics
The STM32U073RCT6 is used in consumer electronics such as smart home devices, remote controls, and portable gadgets. Its ultra-low power consumption and rich peripheral set make it versatile for various applications. The device supports USB 2.0 full-speed, enabling easy connectivity to PCs and chargers. The multiple communication interfaces allow integration with Wi-Fi, Bluetooth, and Zigbee modules for smart home connectivity. The small LQFP64 package is suitable for compact designs, and the wide operating voltage range accommodates battery or USB power.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32U073RCT6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32U073RBT6 | STM32U073RCT7 | GD32F303RCT6 | APM32F103RCT6 |
|---|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice | GigaDevice |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M4 | Arm Cortex-M3 |
| Maximum Frequency | 56 MHz | 56 MHz | 56 MHz | 120 MHz | 72 MHz |
| Flash Memory | 256 KB | 128 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 40 KB | 40 KB | 40 KB | 48 KB | 48 KB |
| Operating Voltage | 1.65V to 3.6V | 1.65V to 3.6V | 1.65V to 3.6V | 2.6V to 3.6V | 2.0V to 3.6V |
| Standby Current | 1.6 µA | 1.6 µA | 1.6 µA | 2.5 µA | 2.0 µA |
| USB | USB 2.0 full-speed device | USB 2.0 full-speed device | USB 2.0 full-speed device | USB 2.0 full-speed device | USB 2.0 full-speed device |
Principaux différenciateurs
- Ultra-low standby current of 1.6 µA (vs GD32F303RCT6)
- Wide operating voltage range from 1.65V (vs APM32F103RCT6)
- Hardware AES-128/256 cryptographic accelerator (vs STM32U073RBT6)
Notes de conception
The STM32U073RCT6 operates from 1.65V to 3.6V. Use a 1µF and 100nF capacitor close to each VDD pin to ensure stable power supply. For battery-powered applications, consider using a low-dropout regulator (LDO) to maintain voltage within the specified range. The VBAT pin can be connected to a backup battery for RTC and backup registers, with a typical current of 130 nA in VBAT mode.
Place the crystal oscillator and its load capacitors as close as possible to the OSC_IN and OSC_OUT pins (PH0 and PH1) to minimize parasitic capacitance and ensure stable clock generation. Use a ground plane under the crystal and keep the traces short and shielded. For the USB interface, route the DP and DM lines as a differential pair with controlled impedance (90 ohms) and place a 22-ohm series resistor on each line to reduce signal reflections.
Avoid floating GPIO pins, as they can increase power consumption and cause unpredictable behavior. Configure unused pins as analog inputs or outputs low. Ensure the BOOT0 pin is properly pulled low for normal boot from flash. When using the ADC, ensure the reference voltage is stable and decoupled with a capacitor. For low-power modes, disable unused peripherals and clocks to achieve the specified standby current of 1.6 µA.
Informations de conformité
Compliance information is based on STMicroelectronics standard product compliance. The STM32U073RCT6 is RoHS compliant and lead-free. AEC-Q100 qualification is not applicable for this standard product line.
