Microchip Technology

SY88773VKG - 3.2Gbps CML Postamplifier | Microchip

Référence : SY88773VKG ✗ Fin de vie
3.3 V or 5 V Vdss Microchip Technology Id 10-MSOP, 0.118 inch x 3.00 mm width Package
MOQ : 1 |

SY88773VKG Présentation

The Microchip Technology SY88773VKG is a 3.3 V or 5 V, 3.2 Gbps CML limiting postamplifier with TTL signal-detect output, supplied in a 10-MSOP surface-mount package. It is designed for high-speed optical-network receiver paths where a photodiode or optical receiver produces a small differential signal that requires limiting, gain, and logic-compatible fault detection before digital processing.

A limiting postamplifier is a high-speed amplifier category that shapes and amplifies weak received signals while limiting their output amplitude. In an optical communication hierarchy, it sits between the optical-to-electrical conversion stage and the clock-and-data-recovery or decision circuitry. Its CML output supports short-distance high-speed interconnects, while the TTL signal-detect output provides a convenient loss-of-signal indication for system monitoring.

The principal identified features of the SY88773VKG include operation from 3.3 V or 5 V, data-rate support to 3.2 Gbps, CML limiting-amplifier functionality, TTL loss-of-signal detection, and low-power operation. Its 10-MSOP package allows a compact surface-mount implementation, although the exposed package dimensions and thermal performance must be considered when operating near the upper limits of the supported environment.

The limiting architecture is appropriate for receiver links where the incoming waveform can vary in amplitude because of optical attenuation, distance, component variation, or connector losses. The amplifier restores usable signal amplitude before downstream circuitry evaluates the data stream. Its integrated signal-detect function can also simplify supervisory logic by indicating whether the received signal meets the device's detection criteria.

Typical uses include optical-network transceivers, optical receiving modules, PON equipment, synchronous data links, telecommunications line cards, and instrumentation requiring a compact CML-to-TTL monitoring path. The device is particularly relevant to legacy 1 Gbps-class links operating at the upper rate supported by the 3.2 Gbps architecture.

Designers should follow the manufacturer datasheet for the exact differential-input topology, input termination, output impedance, signal-detect polarity, bypassing, and layout of the high-speed data path. Maintain short, impedance-controlled connections, use the recommended decoupling close to the supply pins, and avoid long unprotected traces between the amplifier and downstream logic.

This page consolidates the device identity, operating class, package information, lifecycle status, sourcing path, replacement constraints, and practical integration considerations. It also distinguishes the exact ordered SY88773VKG from the broader SY88773V family so engineers can assess compatibility before committing a legacy optical-network design to an alternative.

Alternatives de remplacement direct pour SY88773VKG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

SY88773V

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 10-MSOP
Base-family order code; the SY88773VKG suffix must be confirmed against the manufacturer ordering table for mechanical and lifecycle equivalence

📋 Alternative de référence (hors catalogue)

SY88773VKG Valeurs maximales et caractéristiques électriques

Device Type Limiting postamplifier
Output Interface CML
Signal Detect Output TTL
Loss of Signal Function Yes
Maximum Data Rate 3.2 Gbps
Supply Voltage Options 3.3 V or 5 V
Power Class Low-power
Application Optical networks
Boîtier 10-MSOP, 0.118 inch x 3.00 mm width
Alternate Package Description 10-TFSOP
Type de montage Surface mount
Packaging Tube
Manufacturer Micrel Semiconductor
Current Ownership Microchip Technology
Part Status Obsolete

Guide de configuration des broches du SY88773VKG 10-tfsop

Configuration des broches du SY88773VKG (boîtier 10-tfsop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 10-tfsop pour le SY88773VKG

Aucune donnée de brochage détaillée disponible pour SY88773VKG.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

SY88773VKG convient pour 6 applications: Optical Network Transceiver Receive Path, PON Optical Receiver Module, Telecommunications Line Card, Synchronous Serial Link Receiver, Optical Receiver Monitoring Circuit, Legacy High-Speed Instrumentation.

🌐

Optical Network Transceiver Receive Path

The SY88773VKG fits an optical receiver path that needs a recovered high-speed data signal plus a separate loss-of-signal indication. Its documented 3.2 Gbps CML limiting-postamplifier function can condition the signal after photodetection, while the TTL output supports supervisory logic. Using either a 3.3 V or 5 V rail allows the amplifier to fit systems with different legacy transceiver supply conventions. The principal engineering consideration is preserving the CML link's controlled impedance and keeping supply bypass close to the device. Because the part is obsolete, an existing receiver should also be checked for signal-threshold, detector-polarity, and absolute-maximum limitations before the design is reused in a new platform.

🌐

PON Optical Receiver Module

Passive optical network receiver modules can use the SY88773VKG to condition the burst-mode data returned by a fiber-optic link and report link loss to control logic. The 3.2 Gbps limiting capability provides margin above legacy PON operating rates, while the TTL signal-detect output simplifies loss-of-signal supervision. The compact 10-MSOP format supports transceiver density when the board can maintain the required high-speed return path. Layout should minimize the distance between the amplifier and downstream clock-and-data-recovery circuitry, while decoupling should prevent supply noise from affecting the limiting threshold. Replacement evaluation must confirm the original module's signal polarity, detector logic level, and power-sequencing requirements.

🏭

Telecommunications Line Card

The SY88773VKG can serve as the receive-side limiting stage in legacy telecommunications line cards operating with CML links. Its 3.3 V or 5 V supply flexibility accommodates older and newer rack electronics, and the 3.2 Gbps rate covers established high-speed serial links. The TTL loss-of-signal output allows a supervisory processor to identify a degraded optical path without sampling the high-speed data output directly. For reliable integration, keep the differential traces short, provide a continuous ground reference, and use the manufacturer's recommended bypass network. Because this exact order code is obsolete, maintenance designs should verify component condition and sourcing constraints, while new line-card platforms should qualify a documented successor rather than assuming electrical interchangeability.

🖥️

Synchronous Serial Link Receiver

A synchronous serial receiver can use the SY88773VKG when the source produces a differential signal whose amplitude varies across operating conditions. The limiting function standardizes the signal before it reaches clock-and-data-recovery logic, and the TTL loss-of-signal output provides a separate system-health indication. The documented 3.2 Gbps ceiling supports high-speed legacy links without implying that every board layout will meet that rate. Engineers should review rise-time, jitter, input sensitivity, and output-level requirements in the manufacturer datasheet, then validate the complete channel with eye-diagram measurements. For an obsolete design, preserve the original package footprint and logic definitions to avoid introducing unrelated signal-integrity changes during maintenance.

🔧

Optical Receiver Monitoring Circuit

The SY88773VKG is suitable for an optical-receiver monitoring arrangement where downstream equipment needs a logic-compatible loss-of-signal flag rather than direct access to the high-speed CML waveform. The integrated TTL detector output can connect to supervisory logic while the CML path continues carrying conditioned data. This separation helps simplify health monitoring in modules that must detect link degradation quickly. The designer should confirm detector assertion timing, polarity, and voltage levels in the manufacturer documentation and ensure that the monitor path does not add loading or impedance discontinuities to the data path. Since the order code is obsolete, replacing it with a generic detector amplifier would require a separate design review and complete timing and threshold validation.

🔧

Legacy High-Speed Instrumentation

Laboratory and industrial test equipment built around legacy optical or high-speed copper interconnects can use the SY88773VKG as a compact limiting stage. Its 3.2 Gbps capability is useful when conditioning signals for legacy acquisition or timing circuitry, and the 10-MSOP package supports compact instrument boards. The low-power designation is valuable in multi-channel systems, although the actual channel budget must be calculated from the device's documented supply and quiescent-current characteristics. Keep the signal path away from clock and return-current discontinuities, and provide local high-frequency bypassing. For production continuation, verify availability and condition of the exact MPN; for new instrumentation, consider a currently supported amplifier only after confirming equivalent thresholds, output levels, and detector behavior.

Récapitulatif des produits recommandés

SY88773V Same Micrel limiting-postamplifier family Utilisé dans : Optical Network Transceiver Receive Path, PON Optical Receiver Module, Telecommunications Line Card, Synchronous Serial Link Receiver, Optical Receiver Monitoring Circuit, Legacy High-Speed Instrumentation SY88773VKG Microchip Technology Utilisé dans : Optical Network Transceiver Receive Path, PON Optical Receiver Module, Telecommunications Line Card, Synchronous Serial Link Receiver, Optical Receiver Monitoring Circuit, Legacy High-Speed Instrumentation
What is the SY88773VKG?
The SY88773VKG is a low-power, 3.2 Gbps CML limiting postamplifier with a TTL loss-of-signal output, offered by Microchip Technology in a 10-MSOP package. According to the Micrel Semiconductor datasheet, it is intended for 3.3 V or 5 V optical-network receiver systems. The part combines high-speed signal conditioning with a convenient TTL monitor output in a compact surface-mount package.
What data rate does SY88773VKG support?
The SY88773VKG supports data rates up to 3.2 Gbps. According to the Micrel Semiconductor datasheet, the device is described as a 3.3 V or 5 V, 3.2 Gbps CML low-power limiting postamplifier. This rate capability makes the component applicable to legacy high-speed optical links and telecommunications receiver paths, provided the surrounding link budget and signal-integrity design are also appropriate.
What supply voltage does SY88773VKG operate from?
The SY88773VKG operates from either 3.3 V or 5 V. The Micrel Semiconductor datasheet identifies the part as a 3.3 V or 5 V limiting postamplifier. The appropriate supply selection should follow the system rail, component-level decoupling recommendations, input/output logic compatibility, and the signal integrity required at the selected data rate.
Where can I download the SY88773VKG datasheet PDF?
The SY88773VKG datasheet is available through the Micrel Semiconductor document listing and the SY88773VKG document search page linked on this page. The manufacturer document describes a 3.3 V or 5 V, 3.2 Gbps CML limiting postamplifier with TTL signal detect. Use the complete SY88773VKG order code when checking revisions and package-specific information.
Where can I find the SY88773VKG pinout?
The SY88773VKG pin assignments are defined in the pin-description section of the Micrel Semiconductor SY88773V datasheet. The exact ordered device uses the 10-MSOP package, also described as 10-TFSOP with a 0.118-inch by 3.00 mm width. Use the manufacturer pin-description table when assigning differential inputs, CML outputs, TTL signal-detect connections, supply, ground, and any configuration pins.
Is SY88773VKG suitable for optical network receivers?
Yes, the SY88773VKG is specifically identified for optical-network applications. Its limiting postamplifier stage can condition a received high-speed signal, and the TTL loss-of-signal output can support receiver supervision. According to the Micrel Semiconductor datasheet, the 3.2 Gbps capability and 3.3 V or 5 V operation align with compact optical transceiver and line-card receiver designs.
What is the difference between CML output and TTL signal detect on SY88773VKG?
The CML output carries the conditioned high-speed data, while the TTL signal-detect output indicates the receiver's loss-of-signal status. According to the Micrel Semiconductor datasheet, the SY88773VKG combines a 3.2 Gbps CML limiting postamplifier with TTL loss-of-signal detection. The two outputs therefore serve different signal paths and should not be treated as interchangeable data outputs.
What is the best drop-in replacement for SY88773VKG?
No verified drop-in replacement was identified for the exact SY88773VKG order code. The broader SY88773V family is the only directly related device identified, and its pin and parameter compatibility must be confirmed against the manufacturer datasheet before substitution. A functional limiting postamplifier in the same package is not automatically drop-in compatible because input thresholds, output levels, enable logic, and signal-detect polarity must also match.
Can another limiting postamplifier replace SY88773VKG without PCB changes?
A replacement can be used without PCB changes only if it has the same 10-MSOP footprint, identical pin functions, compatible 3.3 V or 5 V supply operation, suitable CML output characteristics, and equivalent TTL loss-of-signal behavior. No verified cross-manufacturer part satisfying all of those conditions was identified. Validate the complete pinout and dynamic performance rather than relying on package name or data rate alone.
SY88773VKG vs SY88773V: which part should I select?
Select SY88773VKG when the exact Microchip order code, package suffix, and documented lifecycle behavior are required for an existing design. The SY88773V denotes the broader Micrel family and may appear in family-level documentation, but it does not by itself establish the exact packaging suffix of the KG order code. Use the manufacturer ordering table to confirm the mechanically and electrically correct full MPN.
When should I choose SY88773VKG over a generic limiting amplifier?
Choose the SY88773VKG when the design specifically requires its documented combination of 3.2 Gbps CML limiting, 3.3 V or 5 V operation, TTL loss-of-signal detection, and 10-MSOP packaging. A generic amplifier may match the speed requirement but omit the required detector function, logic levels, or pin assignments. For legacy equipment, retaining the established family often reduces qualification and board-layout risk.
Is SY88773VKG still active?
The SY88773VKG is listed as obsolete in the product information shown on this page. Lifecycle status matters because an obsolete device may not receive further design changes, and replacement sourcing can require a careful pin, electrical, and signal-integrity comparison. For maintenance of existing equipment, use the exact obsolete part where appropriate; for new designs, evaluate a fully documented alternative and complete the necessary qualification.
How do I lay out the high-speed SY88773VKG signal path?
Route the high-speed differential path with short traces, continuous reference planes, controlled impedance, and minimized stubbing, following the manufacturer layout guidance. Place required bypass capacitors close to the supply pins and keep the signal-detect route separate from sensitive high-speed nodes where practical. The SY88773VKG can operate to 3.2 Gbps, so connector transitions, return paths, and test-point geometry can materially affect signal integrity.
Where can I buy SY88773VKG and check current availability?
Use the Request a Quote form on this page to ask for SY88773VKG availability, minimum order quantity, and current lead time. Because the component is marked obsolete and no qualifying live quantity-break listing is shown, procurement status should be confirmed for each order rather than assumed from a catalog page. The requested MPN must remain the complete SY88773VKG order code.
What is the price of SY88773VKG?
Request the current SY88773VKG price through the Request a Quote form on this page. The device is listed as obsolete, and no current USD listing with explicit quantity breaks is available for the exact order code. The quote process allows current availability and quantity conditions to be checked together, which is especially important for legacy and obsolete integrated circuits.
What is the lead time for SY88773VKG?
The current lead time for SY88773VKG should be requested through the Request a Quote form on this page. The exact order code is marked obsolete, so standard catalog lead-time assumptions may not apply. A complete request should include the required quantity, target delivery date, and permitted alternative condition or approved manufacturer-change policy if the program can accommodate a substitution.
Are the key specifications of SY88773VKG suitable for a legacy 1 Gbps optical link?
The identified 3.2 Gbps rating, CML data output, and 3.3 V or 5 V supply operation make the SY88773VKG technically applicable to legacy 1 Gbps-class optical links. Suitability still depends on the receiver's differential signal levels, clocking architecture, return loss, loss-of-signal requirements, and board layout. Review the complete manufacturer electrical characteristics before releasing a production replacement.

Données de référence d'ingénierie pour SY88773VKG — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the exact SY88773VKG when maintaining an existing optical-network receiver whose schematic specifies the Micrel 10-MSOP limiting postamplifier and its established CML and TTL interfaces. The base SY88773V is useful for understanding the device family, but the manufacturer ordering table must confirm whether its package suffix, orderability, and lifecycle status exactly match the installed device. Do not select a generic 10-pin limiting amplifier unless its complete pinout, input threshold, CML output levels, TTL detector polarity, supply range, and high-speed performance have been verified as equivalent. For new production designs, an obsolete status should encourage evaluation of a currently supported device with a documented qualification plan. For legacy maintenance, preserving the exact MPN is generally the lowest-risk path when suitable component condition and supply can be secured.

Comparaison avec les alternatives

Paramètre Ce produit SY88773V
Brand Microchip Technology Microchip Technology
Package 10-MSOP 10-MSOP
Device Type Limiting postamplifier Limiting postamplifier
Maximum Data Rate 3.2 Gbps 3.2 Gbps
Supply Voltage 3.3 V or 5 V 3.3 V or 5 V
High-Speed Output CML CML
Signal Detect Output TTL TTL
Power Class Low-power Low-power
Primary Application Optical networks Optical networks

Principaux différenciateurs

  • Combines high-speed CML data output with TTL loss-of-signal detection (vs SY88773V)
  • Supports two legacy optical-link supply rails (vs SY88773V)
  • Designed specifically for optical-network receiver signal conditioning (vs SY88773V)

Notes de conception

Treat the CML data path as a controlled-impedance interconnect rather than a general-purpose logic route. Use the shortest practical connection from the input source to the amplifier and from the amplifier to the receiving circuit, maintain a continuous reference plane, and avoid long stubs or test-point branches. The 3.2 Gbps capability makes trace geometry, return-current continuity, and connector transitions important contributors to eye closure.

Place the manufacturer's recommended bypass capacitors immediately adjacent to the supply and ground pins, with short, low-inductance connections. Keep the high-speed output and signal-detect routing away from switching-regulator nodes and other noisy sources. Validate supply ripple, ground bounce, and startup behavior at both identified 3.3 V and 5 V operating conditions before using the device in a new receiver design.

Do not substitute a generic postamplifier solely because it has a 10-pin MSOP package and a similar data-rate rating. Verify every pin function, differential input threshold, CML output level, TTL signal-detect polarity, supply range, and enable or configuration behavior against the manufacturer pin and electrical tables. The exact SY88773VKG suffix and its obsolete status must also be reviewed before approving a drop-in replacement.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this obsolete Micrel Semiconductor device.

Données vérifiées le : 2026-11-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

SY88773VKG datasheet SY88773VKG pinout SY88773VKG datasheet pdf SY88773VKG equivalent SY88773VKG replacement SY88773VKG cross reference SY88773VKG price SY88773VKG stock Microchip SY88773VKG 3.2Gbps CML limiting postamplifier 10-MSOP optical postamplifier SY88773VKG optical receiver SY88773VKG vs SY88773V SY88773V application circuit

Composants & termes associés

Microchip Technology Micrel Semiconductor SY88773VKG SY88773V limiting postamplifier high-speed amplifier CML TTL loss of signal 3.2 Gbps 3.3 V 5 V optical networks optical transceiver PON telecommunications line card 10-MSOP 10-TFSOP surface mount signal integrity controlled impedance power supply rejection RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ