SY89536LHC - 500MHz Clock Synthesizer | Microchip
Référence : SY89536LHC ✗ Fin de vieSY89536LHC Présentation
A programmable PLL clock synthesizer is a clock-and-timing IC that multiplies or divides a reference frequency and distributes the resulting clock to multiple circuit domains. The SY89536LHC belongs to Microchip's Precision Edge family and combines frequency synthesis with differential and single-ended clock translation. This integration allows a common reference to support several incompatible clock-interface standards without requiring a separate translator for each destination.
The device supports a 3.3 V supply and an operating output-frequency range of 33 MHz to 500 MHz. Its LVPECL and HSTL outputs suit high-speed backplanes, processor interfaces, communications equipment, and test systems. The flexible reference-input architecture permits use with multiple logic families, while the integrated fanout section reduces the number of discrete clock components needed around the PLL. Divider and translator functions add further design flexibility in multi-rate systems.
Technically, the principal benefit is system timing consolidation. Combining PLL synthesis, fanout, division, and translation in one package can shorten routing paths and reduce clock-tree complexity. The flexible input stage supports both single-ended and differential sources, allowing a system designer to select the reference format that best matches the upstream timing device. Exact PLL multiplication ratios, divider values, jitter, skew, output count, and electrical limits should be taken from the manufacturer datasheet for the selected operating configuration.
Typical uses include networking and communications backplanes, processor clock generation, data-converter instrumentation, industrial control electronics, and high-speed test equipment. The LVPECL outputs are appropriate for point-to-point links carrying high-frequency clock signals, while HSTL outputs support compatible single-ended clock networks. Differential clock routing and controlled termination remain important when signal integrity is critical.
Design the SY89536LHC reference and clock-output network according to the manufacturer's recommended termination and decoupling arrangements. Keep high-speed clock traces short, controlled-impedance, and away from noisy switching nodes. Confirm output frequency, reference ratio, jitter, supply tolerance, and unused-pin treatment for the exact configuration before releasing a PCB layout.
This product overview combines the device function, operating limits, interface options, application guidance, package information, and qualification constraints for engineering selection. It also distinguishes documented capabilities from parameters that require schematic-level review in the manufacturer datasheet.
Alternatives de remplacement direct pour SY89536LHC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesSY89536LHC Spécifications
| Product Type | Programmable bus-clock synthesizer |
| Tension d'alimentation | 3.3 V |
| Output Frequency Range | 33 MHz to 500 MHz |
| Output Logic Families | LVPECL and HSTL |
| Input Logic Families | Single-ended LVTTL/CMOS, SSTL; differential LVPECL, LVDS, HSTL, and CML |
| PLL | Present |
| Bypass Input | Available |
| Input-to-Output Ratio | 1:13 |
| Differential Input | Supported |
| Differential Output | Supported |
| Integrated Functions | Synthesizer, fanout buffers, clock dividers, and translator |
| Boîtier | 64-pin TQFP |
| Type de montage | Surface mount |
Guide de configuration des broches du SY89536LHC 64-pin tqfp
Configuration des broches du SY89536LHC (boîtier 64-pin tqfp). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour SY89536LHC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
SY89536LHC convient pour 6 applications: High-Speed Communications Backplanes, Processor and Data-Converter Clocks, Industrial Timing Control, Test and Measurement Equipment, Network and Communications Equipment, Semiconductor Test Systems.
High-Speed Communications Backplanes
The SY89536LHC fits communications equipment that distributes a common clock across several high-speed interfaces. Its programmable 33 MHz to 500 MHz LVPECL output range supports point-to-point clock links, while HSTL outputs address compatible single-ended networks. Integrating PLL synthesis, dividers, fanout buffers, and translation reduces the number of separate timing components required around the backplane. Designers should preserve controlled impedance, use the recommended termination network, and keep clock routing short to limit edge degradation and part-to-part skew.
Recommandé
Processor and Data-Converter Clocks
The SY89536LHC is applicable where a processor, data converter, or digital acquisition block needs a locally generated clock synchronized to a shared reference. Its PLL synthesizer can produce programmable output frequencies from 33 MHz to 500 MHz, and the integrated dividers and fanout stages can serve multiple clock destinations. The LVPECL outputs suit short, point-to-point links into capable receiver logic. The HSTL outputs support compatible single-ended infrastructure. Exact input ratios and divider combinations must be selected from the manufacturer configuration guidance for the intended clock tree.
Recommandé
Industrial Timing Control
The SY89536LHC can support industrial control, instrumentation, and data-acquisition systems that need several synchronized clocks derived from one stable reference. Its flexible reference input accepts single-ended LVTTL, CMOS, or SSTL sources and differential LVPECL, LVDS, HSTL, or CML sources. The integrated translator and fanout functions help organize incompatible clock levels within one timing subsystem. Industrial implementations should verify operating-temperature limits, supply tolerances, isolation requirements, and regulatory obligations before production release, because those details are not established by the abbreviated catalog information.
Recommandé
Test and Measurement Equipment
The SY89536LHC is relevant to test and measurement equipment requiring programmable clock generation with selectable output standards. Its 33 MHz to 500 MHz operating range, integrated PLL, fanout buffers, dividers, and logic translators can support multiple instrument sections that require correlated timing. LVPECL provides a differential option for point-to-point interconnections, while HSTL supports compatible single-ended clock distribution. Laboratory designs should evaluate jitter, deterministic jitter, skew, output amplitude, and termination against the measurement specification before choosing the final clock configuration.
Recommandé
Network and Communications Equipment
The SY89536LHC fits network-interface and line-card designs that require a common reference to become several synchronized operating clocks. Its integrated synthesis, division, fanout, and translation functions can reduce the size of a clock tree compared with separate PLL, divider, buffer, and translator devices. Programmable LVPECL outputs are useful for high-speed serial-interface clocking, while HSTL can serve compatible parallel logic. Board-level design must minimize clock jitter accumulation, maintain return paths in multilayer stack-ups, and follow the manufacturer's recommendations for bypass capacitors and output termination.
Recommandé
Semiconductor Test Systems
The SY89536LHC can serve as the central clock element in automated semiconductor test equipment, where several instruments must share a deterministic frequency relationship. Programmable outputs from 33 MHz to 500 MHz support probing, interface, and stimulus subsystems operating with LVPECL or HSTL requirements. Combining the PLL and fanout functions on one board reduces the number of separately clocked stages and can simplify synchronization. The obsolete lifecycle status requires careful sourcing planning, while functional substitution must be proven against every package pin and the exact clock ratios used by the test platform.
Recommandé
Données de référence d'ingénierie pour SY89536LHC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Microchip Technology |
| Package | 64-pin TQFP |
| Product Type | Programmable bus-clock synthesizer |
| Supply Voltage | 3.3 V |
| Output Frequency Range | 33 MHz to 500 MHz |
| Output Logic | LVPECL and HSTL |
| Reference Input Support | LVTTL, CMOS, SSTL, LVPECL, LVDS, HSTL, and CML |
| Integrated Functions | Synthesizer, fanout buffers, clock dividers, and translator |
| Input-to-Output Ratio | 1:13 |
| Lifecycle Status | Obsolete |
Principaux différenciateurs
- Combines several clock functions in one device (vs Basic single-output clock generator)
- Supports multiple reference standards (vs Single-input-format clock generator)
- Provides differential and single-ended outputs (vs Single-logic-family clock buffer)
- Covers a wide programmable operating range (vs Fixed-frequency clock oscillator)
Notes de conception
Follow the manufacturer reference layout and pin-assignment table when assigning all 64 TQFP terminals. Place required bypass capacitors close to their specified supply and ground pins, use a continuous ground reference beneath the device where the package allows, and route differential clock outputs as short matched pairs. Do not infer unused or reserved terminals from generic TQFP conventions.
Treat LVPECL and HSTL clock paths as high-speed controlled-impedance nets. Keep traces short, avoid unnecessary stubs, provide the recommended source and load termination, and maintain return-path continuity across layer transitions. Account for connector and package parasitics when the clock rate approaches the upper end of the 33 MHz to 500 MHz operating range.
Do not select a replacement from frequency range and package appearance alone. The SY89536LHC integrates a PLL, fanout buffers, dividers, and a translator, so a substitute must preserve the relevant pin functions, reference formats, output standards, divider architecture, and programmable operating range. Review the manufacturer cross-reference results and the original datasheet before approving any new source.
Separate reference-input, PLL-sensitive, and clock-output routing to reduce coupling from switching circuitry. Keep the reference path compact and away from noisy power converters or high-current traces. Because the device supports differential and single-ended sources, preserve the source-specific reference topology and termination recommended for the selected input rather than applying a generic termination network.
Informations de conformité
The catalog information identifies the device as obsolete but does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this general-purpose clock synthesizer.