Texas Instruments

THS1031CPW - 10-Bit 30-MSPS ADC | Texas Instruments

Référence : THS1031CPW ✓ Actif
3 V to 5.5 V Vdss 28-pin TSSOP Package
MOQ : 1 |

THS1031CPW Présentation

The Texas Instruments THS1031CPW is a single-input, 10-bit, 30-MSPS pipelined CMOS analog-to-digital converter housed in a 28-pin TSSOP package. It operates from a 3 V to 5.5 V supply and presents its conversion result through a parallel digital interface, making it suitable for compact data-acquisition and signal-processing systems.

An ADC is an interface IC that converts a continuously varying analog voltage into a numeric code for processing by a microcontroller, DSP, FPGA, or digital system. A 10-bit converter provides 1,024 possible output codes, while a 30-MSPS sampling rate allows up to 30 million samples to be captured each second. The THS1031CPW therefore serves as the bridge between an analog sensor or signal chain and a parallel digital acquisition architecture.

The principal specifications are 10-bit resolution, a 30 MSPS conversion rate, one analog input, a 3 V to 5.5 V analog supply range, parallel output, and a 28-pin TSSOP package. Its pipelined architecture separates sampling and conversion into internal stages, supporting high sampling throughput. The parallel interface avoids adding a serial link between the converter and a directly connected digital processor.

At the system level, the converter can be paired with an analog front end that performs amplification, filtering, level shifting, and signal conditioning before conversion. The supply range supports both 3 V and 5 V system architectures, but the external front end must keep the converter input within its allowable analog-input range. Clock timing, output timing, reference voltage, and input settling remain important implementation constraints.

Typical applications include industrial process monitoring, communications infrastructure, consumer instrumentation, medical signal acquisition, digital oscilloscope or waveform-capture systems, and embedded data-acquisition equipment. In these systems, the 30-MSPS sampling rate supports rapidly changing waveforms, while the 10-bit output resolution provides a practical balance between conversion throughput, digital interface width, and implementation cost.

The primary design consideration is ensuring that the analog front end can drive the ADC input sufficiently during each sampling interval. Layout should preserve short, controlled signal paths and minimize digital switching noise near the analog input. Follow the pin-description and application-circuit tables in the Texas Instruments datasheet for supply decoupling, clock routing, and output-interface assignments.

This product page combines the key converter specifications with package guidance, sourcing instructions, application engineering notes, and a comparison framework. It also distinguishes verified drop-in options from parts that differ in resolution or package, helping engineers avoid replacements that require PCB or interface changes.

Alternatives de remplacement direct pour THS1031CPW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec THS1031CPW (même facteur de forme et même empreinte) — différant par Architecture, Package, RoHS Status.

Texas Instruments
Architecture: Pipelined CMOS ADC
Package: 28-TSSOP
RoHS Status: unknown
Comparer avec THS1031CPW →
Texas Instruments
Architecture: Pipelined
RoHS Status: Compliant
Comparer avec THS1031CPW →

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

THS1031CPW Valeurs maximales et caractéristiques électriques

Converter Type Single-input pipelined ADC
Résolution 10 bit
Fréquence d'échantillonnage 30 MSPS
Analog Input Count 1 input
Supply Voltage Range 3 V to 5.5 V
Digital Output Interface Parallel
Process Technology CMOS
Boîtier 28-pin TSSOP
Type de montage Surface mount

Guide de configuration des broches du THS1031CPW 28-pin tssop

Configuration des broches du THS1031CPW (boîtier 28-pin tssop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 28-pin tssop pour le THS1031CPW

Aucune donnée de brochage détaillée disponible pour THS1031CPW.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

THS1031CPW convient pour 6 applications: Industrial Process Monitoring, Communications Signal Capture, Digital Oscilloscope Front End, Medical Signal Acquisition, Consumer Test and Measurement, Embedded Data Acquisition.

🏭

Industrial Process Monitoring

The THS1031CPW is appropriate for process-measurement systems that convert sensor outputs into digital data for a controller or supervisory computer. Its 10-bit resolution creates 1,024 quantization levels, while the 30 MSPS conversion capability can oversample relatively slow process signals and support diagnostic waveform checks. A transducer, amplifier, and anti-alias filter should condition the input before it reaches the converter. The parallel interface allows the result to be captured efficiently by nearby programmable logic or a digital signal controller.

🌐

Communications Signal Capture

The THS1031CPW can serve as the sampling element in communications equipment that observes IF or other analog signals for demodulation, monitoring, or diagnostics. The 30 MSPS rate provides temporal resolution for waveform analysis, while 10-bit output resolution can capture envelope and timing information with 1,024 available codes. A practical implementation needs an RF or IF conditioning chain, suitable gain, an anti-alias filter, and a clock source whose timing uncertainty does not degrade the sampled signal.

📺

Digital Oscilloscope Front End

The THS1031CPW is suitable for entry-level digital oscilloscope and waveform-capture front ends where a 30 MSPS sampling rate and 10-bit resolution provide a practical balance between bandwidth, data volume, and processing cost. The parallel interface can feed a capture FPGA or processor, while the pipelined converter supports repeated waveform acquisition. Performance depends on the amplifier, input attenuation, bandwidth, reference stability, and memory acquisition pipeline feeding the converter.

💊

Medical Signal Acquisition

The THS1031CPW can be used in diagnostic and monitoring equipment for low- or moderate-bandwidth physiological signals after appropriate amplification and filtering. Its 10-bit resolution supplies 1,024 codes, and the 30 MSPS rate is considerably above the bandwidth required by many conventional sensor signals. The analog front end must provide the required input range, common-mode behavior, noise performance, and patient-signal isolation; interface timing and data capture must be designed to preserve the converter measurements.

🔧

Consumer Test and Measurement

The THS1031CPW fits portable or desktop test instruments that digitize low-frequency and mid-band analog test signals. The 3 V to 5.5 V operating range supports compact mixed-voltage systems, and the parallel output permits direct connection to a display controller, DSP, or FPGA. A practical instrument also needs a precision reference, stable clocking, input protection, calibration, and enough analog bandwidth to preserve waveform accuracy rather than merely sampling it.

🖥️

Embedded Data Acquisition

The THS1031CPW can form the conversion stage of an embedded acquisition card connected to a real-time processor or programmable logic. Its single-input architecture simplifies channel routing, while the 10-bit parallel result provides a straightforward bus interface. At 30 MSPS, sustained operation requires careful consideration of output timing, board-level bus loading, clock distribution, and data-capture bandwidth. The converter should be placed close to the conditioned input to minimize sensitive analog traces and reduce susceptibility to digital switching noise.

What is the resolution and sampling rate of the THS1031CPW?
The THS1031CPW provides 10-bit resolution and a 30 MSPS sampling rate. According to the Texas Instruments datasheet, it is a single-input, pipelined CMOS analog-to-digital converter with a parallel digital output. The 10-bit format yields 1,024 quantization levels, while the 30 MSPS rate is suitable for acquisition systems that must sample rapidly changing analog waveforms.
What is the supply voltage range of THS1031CPW?
The THS1031CPW operates from 3 V to 5.5 V. The Texas Instruments datasheet identifies the device as a CMOS analog-to-digital converter for 3 V to 5.5 V operation, allowing it to fit both 3 V and 5 V equipment architectures. The analog and digital supply pins should still be decoupled according to the application circuit and layout instructions in the datasheet.
What interface does the THS1031CPW use?
The THS1031CPW uses a parallel digital output interface. According to the Texas Instruments datasheet and product listings, it is a 10-bit, 30-MSPS converter with parallel data output rather than a serial interface. This makes it appropriate for systems in which the ADC connects directly to a digital processor and sufficient logic routing and board space are available.
What package does the THS1031CPW use?
The THS1031CPW is packaged in a 28-pin TSSOP. Texas Instruments identifies the device as a 28-TSSOP analog-to-digital converter, and the corresponding package drawing is used for the package pinout. Confirm orientation, exposed thermal requirements, and land-pattern dimensions against the Texas Instruments package drawing before placing the part on a PCB.
Where can I download the THS1031CPW datasheet PDF?
The THS1031CPW datasheet PDF can be obtained through the Texas Instruments product documentation or the datasheet link listed on this page. The manufacturer document identifies the device as a 3 V to 5.5 V, 10-bit, 30-MSPS CMOS analog-to-digital converter and provides the authoritative pin descriptions, electrical characteristics, timing information, and recommended application circuit.
Where can I find the THS1031CPW pinout?
The THS1031CPW pinout is defined by the Texas Instruments datasheet and its 28-pin TSSOP package drawing. Use the pin-description table to assign analog inputs, supply rails, reference connections, clock signals, digital data outputs, and control pins. The package image on this page identifies the physical footprint, while the datasheet remains the controlling document for electrical meaning.
Is THS1031CPW suitable for high-speed signal acquisition?
The THS1031CPW is suitable for many high-speed acquisition tasks because it samples at up to 30 MSPS and converts in a pipelined architecture. Its 10-bit resolution provides 1,024 output codes per conversion. Whether it is adequate depends on the required dynamic range, noise performance, analog bandwidth, and acquisition system architecture.
THS1031CPW vs THS1230CPWR — which converter has higher resolution?
The THS1230CPWR has 12-bit resolution, compared with the 10-bit resolution of the THS1031CPW. Both devices are listed as 30-MSPS converters in a 28-pin TSSOP package. Resolution and package similarity alone do not establish pin-to-pin interchangeability, so verify the complete pin description, timing, input range, and reference configuration in the relevant datasheets.
When should I choose THS1031CPW over a higher-resolution converter?
Choose the THS1031CPW when a 30 MSPS sampling rate and 10-bit resolution are sufficient for the measurement. It can simplify processing because each sample contains 10 bits rather than the 12 bits produced by a 12-bit alternative. Confirm that the required signal-to-noise ratio, input bandwidth, and conversion accuracy can still be met by the complete analog front end and acquisition chain.
Is THS1031CPW suitable for industrial or embedded measurement systems?
The THS1031CPW is functionally suitable for embedded and industrial measurement systems that require a 3 V to 5.5 V supply, 10-bit conversion, and 30 MSPS acquisition. Its parallel interface works well when a processor or logic device is physically close. Final qualification also depends on temperature grade, isolation, EMC requirements, and the complete front-end design.
What can replace THS1031CPW without redesigning the PCB?
A true drop-in replacement for the THS1031CPW must use the same 28-pin TSSOP footprint and preserve the pin functions, supply requirements, input range, clocking, and output timing. THS1031CPWR has closely related ordering information, while THS1230CPWR changes resolution to 12 bits. Neither should be treated as automatically interchangeable without a complete datasheet comparison.
Is THS1031CPW the same as THS1031CPWR?
THS1031CPW and THS1031CPWR refer to closely related 10-bit, 30-MSPS, 28-pin TSSOP versions of the converter, with the suffix generally distinguishing the orderable packaging or shipment configuration. Check the Texas Instruments ordering table for the exact mechanical and reel-or-tube details before treating one as a purchasing substitute for the other.
Where can I buy THS1031CPW and check current availability?
Use the Request a Quote form on this page to request THS1031CPW availability, commercial terms, and a current quotation. The form allows the request to be tied to the exact Texas Instruments MPN and its 28-pin TSSOP configuration, reducing the risk of confusing it with a different package, resolution, or orderable suffix.
What is the lead time for THS1031CPW?
The current lead time for THS1031CPW should be requested through the Request a Quote form on this page. Lead time can depend on the exact orderable suffix, package shipment configuration, order quantity, and manufacturer inventory at the time of quotation. The Request a Quote workflow provides a current purchasing response for the selected MPN.
Is THS1031CPW in stock?
Current THS1031CPW inventory should be confirmed through the Request a Quote form on this page. The exact manufacturer suffix and quantity are important because inventory can vary by packaging configuration and order volume. Submitting the MPN through the quote workflow returns a current commercial availability response rather than an unverified stock count.
What are the key specifications of THS1031CPW that engineers should know?
The key THS1031CPW specifications are 10-bit resolution, 30 MSPS operation, one analog input, a 3 V to 5.5 V supply range, a parallel output, CMOS construction, and a 28-pin TSSOP package. According to the Texas Instruments datasheet, the pipelined converter architecture supports high sampling throughput. Its main design implications are parallel-bus routing, clock control, and careful analog input conditioning.

Données de référence d'ingénierie pour THS1031CPW — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the THS1031CPW when the design needs a 10-bit ADC capable of 30 MSPS operation from a 3 V to 5.5 V supply and can accommodate a 28-pin TSSOP parallel interface. It is especially useful when 1,024 quantization levels are sufficient and the priority is a straightforward conversion path rather than maximum resolution. Review THS1230CPWR when 12-bit resolution would improve the measurement, but do not assume it is drop-in compatible because pin assignments, timing, and electrical limits must match. Related THS1031CPWR ordering options may serve procurement needs where the manufacturer identifies the same electrical device in a different shipment configuration. Confirm package orientation, clocking, reference design, input range, and temperature requirements against the appropriate Texas Instruments datasheet before committing the layout.

Notes de conception

Route the analog input as a short, controlled-impedance trace directly from the conditioning network to the converter. Keep switching clocks, parallel outputs, and digital return currents away from the input and reference paths. Place input and supply bypass capacitors near their associated pins using the shortest practical connections, and follow the Texas Instruments land-pattern and layout examples when defining the board stack-up.

Design the clock and output interface for predictable timing at 30 MSPS. Account for output timing relative to the sampling clock, board propagation delay, input settling, and the acquisition device's input capacitance. If the 10-bit parallel bus is long, use controlled routing and terminate or buffer signals according to the complete system architecture. Avoid relying on rounded timing margins when the sampling interval is only about 33 ns.

Do not treat a converter with the same package as automatically interchangeable. THS1230CPWR changes resolution from 10 bits to 12 bits, while related ordering suffixes may differ in shipment format. Before substitution, compare every pin, the analog input range, reference connection, supply sequencing, clock polarity, output coding, and timing specifications. Also verify that the receiving logic has enough input count and acquisition bandwidth for the selected converter.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance declarations are not stated in the available product information. Confirm RoHS, REACH, lead-free, halogen-free, AEC-Q100, and conflict-minerals status with the manufacturer for the exact orderable MPN before regulatory qualification.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

THS1031CPW datasheet THS1031CPW pinout THS1031CPW datasheet pdf THS1031CPW specifications THS1031CPW price THS1031CPW stock THS1031CPW equivalent THS1031CPW replacement THS1031CPW footprint THS1031CPW application circuit THS1031CPW vs THS1230CPWR Texas Instruments THS1031CPW

Composants & termes associés

Texas Instruments THS1031CPW THS1031CPWR THS1230CPWR analog-to-digital converter ADC single-input ADC pipelined ADC data converter interface IC semiconductor 10-bit resolution 30 MSPS parallel digital interface CMOS 3 V to 5.5 V supply TSSOP-28 surface mount industrial process monitoring medical signal acquisition digital oscilloscope embedded data acquisition anti-alias filter signal conditioning
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ