Texas Instruments

TMS320C25FNL50 - 50MHz Fixed-Point DSP | Texas Instruments

Référence : TMS320C25FNL50 ✗ Fin de vie
68-pin PLCC Package 50 MHz Speed
MOQ : 1 |

TMS320C25FNL50 Présentation

Texas Instruments TMS320C25FNL50 is a second-generation, fixed-point digital signal processor operating at 50 MHz and housed in a 68-pin PLCC package measuring approximately 24.23 mm by 24.23 mm. The device combines a dedicated DSP architecture with an external-memory interface for implementing real-time signal-processing functions. Its fixed-point architecture is suited to deterministic filtering, modulation, waveform generation, control, and communications algorithms where predictable execution and compact hardware implementation are important.

A digital signal processor, or DSP, is a semiconductor optimized to execute repetitive mathematical operations on sampled signals. In the product hierarchy, the TMS320C25 belongs to the digital signal processor class within integrated circuits, alongside microcontrollers and other programmable processors. Unlike a general-purpose processor, a DSP is designed around a specialized execution architecture intended to accelerate multiply-and-accumulate operations and other signal-processing tasks. The TMS320C25 represents the second generation of the TMS320 processor family.

The TMS320C25FNL50 is identified as a fixed-point DSP with a 50 MHz clock-related product specification. Its second-generation architecture is documented alongside electrical specifications, timing diagrams, architecture information, and mechanical data. The manufacturer documentation also covers NMOS and CMOS device variants, giving designers a consolidated technical reference for clocking, interfaces, timing, and package integration. The PLCC package provides a substantial pin count for address, data, control, and memory-interface connections.

TMS320C25-family processors are appropriate for industrial control, audio and communications signal processing, measurement systems, and embedded DSP modules. Fixed-point arithmetic is particularly useful when the required dynamic range can be represented with integer and fractional binary arithmetic. At 50 MHz, the processor can execute signal-processing algorithms in real time while offloading those workloads from a general-purpose host processor.

Circuit implementation requires careful attention to clock timing, memory-interface layout, supply conditions, decoupling, and the 68-pin PLCC footprint. Because a PLCC package has fine-pitch leads and many externally connected signals, the PCB should use a manufacturer-compatible land pattern, adequate trace spacing, and a stable ground-return structure. Programming and debugging plans should be established during board design rather than after the memory and peripheral connections are fixed.

This page consolidates the available manufacturer and distributor information into a practical engineering reference covering the TMS320C25FNL50 architecture, package characteristics, application fit, comparison points, and PCB design considerations. It also identifies missing technical details that must be confirmed in the manufacturer datasheet before schematic release or production qualification.

Alternatives de remplacement direct pour TMS320C25FNL50 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec TMS320C25FNL50 (même facteur de forme et même empreinte) — différant par Architecture.

Texas Instruments
Architecture: 16/32-bit single-chip digital signal processor
Comparer avec TMS320C25FNL50 →

TMS320C25FNLR

✅ Remplacement direct
Texas Instruments
📦 68-lead PLCC
Fixed-Point Digital Signal Processor (DSP) · 50 MHz · 80 ns · 10 MIPS · 16/32-bit single-chip digital signal processor · 32-bit · 16-bit · 544 words

Contactez-nous pour le prix

Voir la fiche technique →

TMS320C25FNL-50

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 68-lead PLCC
Same 50 MHz clock grade and same 68-PLCC lead arrangement as TMS320C25FNL50; suffix denotes the 50 MHz speed grade, electrically identical

📋 Alternative de référence (hors catalogue)

TMS320C25FNL100

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 68-lead PLCC
Clock speed 100 MHz vs 50 MHz (2x higher instruction rate, -50% cycle time); same 68-PLCC pinout and instruction set, timing margin must be re-verified

📋 Alternative de référence (hors catalogue)

TMS320C25FNL-100

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 68-lead PLCC
Clock speed 100 MHz vs 50 MHz; same 68-PLCC lead assignment and register set, requires oscillator and memory timing re-qualification

📋 Alternative de référence (hors catalogue)

TMS320C25FNL-40

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 68-lead PLCC
Clock speed 40 MHz vs 50 MHz (20% slower, +25% cycle time for the same algorithm); same 68-PLCC footprint and pinout

📋 Alternative de référence (hors catalogue)

TMS320C25FNL50 Spécifications

Product Type Fixed-point digital signal processor
Processor Generation Second generation
Clock Frequency 50 MHz
Package Type 68-pin PLCC
Package Body Dimensions 24.23 mm x 24.23 mm
Architecture TMS320 second-generation fixed-point DSP architecture
Arithmetic Format Fixed-point
Type de montage Surface mount

Guide de configuration des broches du TMS320C25FNL50 24.23 mm x 24.23 mm

Configuration des broches du TMS320C25FNL50 (boîtier 24.23 mm x 24.23 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 24.23 mm x 24.23 mm pour le TMS320C25FNL50

Aucune donnée de brochage détaillée disponible pour TMS320C25FNL50.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

TMS320C25FNL50 convient pour 6 applications: Digital Filter Implementations, Industrial Control Systems, Communications Signal Processing, Audio Signal Conditioning, Instrumentation and Measurement, Legacy Embedded DSP Modules.

🔧

Digital Filter Implementations

The TMS320C25FNL50 is suitable for real-time fixed-point filtering when the required filter order and coefficients fit the device's available memory and timing limits. Its 50 MHz second-generation DSP architecture is oriented toward efficient execution of signal-processing algorithms rather than general-purpose software. The implementation should use fixed-point scaling and coefficient quantization carefully, while the design team confirms processor timing against the datasheet. External program or data memory may also be required depending on filter complexity. Before schematic release, verify the memory interface, interrupt timing, clock configuration, and any required I/O connections against the exact pin table.

🏭

Industrial Control Systems

The TMS320C25FNL50 can support embedded fixed-point control calculations in equipment that benefits from deterministic signal processing and dedicated DSP execution. Potential tasks include sensor conditioning, loop calculations, actuator command generation, and filtering of sampled control signals. The 50 MHz processor class can offload these operations from a general-purpose controller, but the control engineer must establish worst-case execution time and verify the device's timer, interrupt, and memory resources. External interface circuitry will determine how the processor connects to sensors and actuators. The manufacturer datasheet should govern pin assignment, timing, and electrical limits.

🌐

Communications Signal Processing

The TMS320C25FNL50 is appropriate for communications-related fixed-point processing in legacy and specialized equipment, including filtering, modulation support, waveform shaping, and receiver or transmitter signal conditioning. Its second-generation TMS320 architecture provides a dedicated implementation path for repetitive numerical operations at a 50 MHz clock-related rating. Designers should match the device's available serial interfaces and memory to the communication protocol, and should evaluate whether modern protocol requirements exceed the peripheral set. Firmware development and interface timing must follow the manufacturer's electrical and pin-description documentation. For new high-throughput links, compare the processor's I/O capabilities before committing the board design.

🎧

Audio Signal Conditioning

The TMS320C25FNL50 can be used for fixed-point audio functions such as equalization, filtering, mixing-related calculations, dynamic processing, and other real-time sample-domain operations. A dedicated DSP architecture is useful when processing deadlines require predictable numerical execution rather than a general-purpose operating system. The audio designer must select an appropriate word length, manage coefficient scaling, and confirm the required sample rate against the 50 MHz processor timing. Analog input and output stages remain separate from the digital processor. Use the device documentation to assign serial, parallel memory, timer, and interrupt signals, and to establish clocking for the complete audio subsystem.

📟

Instrumentation and Measurement

The TMS320C25FNL50 is suitable for embedded measurement systems that acquire samples and perform correction, filtering, calibration, or spectral processing in real time. Its fixed-point arithmetic can represent measured quantities with controlled scaling, provided the engineer defines the dynamic range and coefficient precision for each signal chain. The system integrator should determine whether the on-chip memory and external interface can support the selected acquisition architecture. Timing margins, interrupt latency, and clock jitter are particularly important when processing synchronized sensor channels. Use the manufacturer's timing and electrical tables to select memory devices, interface logic, and termination that preserve correct bus operation across temperature.

🖥️

Legacy Embedded DSP Modules

The TMS320C25FNL50 is a practical choice for repairing or extending embedded modules that were originally designed around the TMS320C25 family's fixed-point architecture and 68-pin PLCC footprint. Retaining the processor can preserve existing firmware, memory organization, and board investment. A replacement decision should still account for availability, lifecycle status, tool compatibility, and long-term maintenance. Before populating a new assembly, compare the exact orderable suffix, clock grade, temperature range, and package against the original schematic. The manufacturer's ordering information and datasheet are the controlling references for any drop-in substitution.

What is the TMS320C25FNL50?
The TMS320C25FNL50 is a Texas Instruments second-generation, fixed-point digital signal processor clocked at 50 MHz and packaged in a 68-pin PLCC. According to the Texas Instruments TMS320C25 product documentation, the processor belongs to the TMS320 family and is intended for real-time signal-processing workloads. Its fixed-point architecture emphasizes efficient execution of digital filtering, control, communications, and related mathematical algorithms.
What are the key specifications of TMS320C25FNL50 that engineers should know?
The key TMS320C25FNL50 specifications are a 50 MHz clock frequency, fixed-point digital signal processing, second-generation TMS320 architecture, and a 68-pin PLCC package measuring approximately 24.23 mm by 24.23 mm. Texas Instruments documents the processor in a datasheet covering architecture, electrical specifications, timing diagrams, and mechanical data. Memory capacity, pin-level functions, and electrical limits should be confirmed from the device pin-description and electrical-specification tables.
Where can I download the TMS320C25FNL50 datasheet PDF?
The TMS320C25FNL50 datasheet can be obtained from the Texas Instruments TMS320C25 product page or from the datasheet PDF archived for the exact device. The manufacturer product page is the preferred starting point because it links current documentation and ordering information. Use the TMS320C25FNL50 documentation for the 50 MHz grade and the 68-pin PLCC mechanical drawing when releasing the PCB footprint.
Where can I find the TMS320C25FNL50 pinout?
The TMS320C25FNL50 pinout is found in the pin-description and mechanical-data sections of the Texas Instruments TMS320C25 datasheet. The component uses a 68-pin PLCC package, so the land pattern must follow the 68-lead PLCC dimensions and pin numbering defined by the manufacturer. Do not infer individual signal names from generic PLCC libraries; assign every power, ground, clock, memory, and control connection from the device-specific pin table.
Is TMS320C25FNL50 suitable for digital filtering and real-time control?
The TMS320C25FNL50 is suitable for fixed-point digital filtering and real-time control when the algorithm's arithmetic range and execution timing meet the system requirements. Its 50 MHz second-generation DSP architecture is specifically oriented toward signal-processing tasks rather than general-purpose control. Designers should confirm instruction-cycle timing, memory-interface limits, coefficient precision, and available RAM before committing to a control loop or filter implementation.
What can replace TMS320C25FNL50?
No verified drop-in replacement for the TMS320C25FNL50 was identified in the available manufacturer, distributor, and cross-reference results. A genuine replacement must match the 68-pin PLCC footprint, pin functions, clock characteristics, memory interface, supply requirements, and software compatibility. A device with similar instruction-set performance is not automatically a drop-in replacement, so any substitution should be validated against the exact datasheet and existing firmware.
Is TMS320C25FNL50 the same as TMS320C25FNL?
The TMS320C25FNL and TMS320C25FNL50 appear to be ordering representations within the same TMS320C25F device family, with the latter identifying the 50 MHz grade in its full MPN. However, suffix interpretation must be confirmed against the Texas Instruments ordering information for the exact device. Verify the clock grade, temperature range, package, and any qualification marking before treating the two strings as interchangeable.
TMS320C25FNL50 vs TMS320C25FNL - which should be selected?
Select the TMS320C25FNL50 when the design requires the explicitly identified 50 MHz TMS320C25F grade and uses the 68-pin PLCC package. Treat TMS320C25FNL as a related orderable designation whose clock and temperature suffix must be confirmed from the manufacturer ordering table. The deciding factors are the required clock rate, environmental grade, package, lifecycle status, and whether existing firmware and board documentation are already fixed.
When should I choose TMS320C25FNL50 instead of a newer DSP?
Choose TMS320C25FNL50 when an existing design already uses its 68-pin PLCC footprint, memory interface, and software toolchain, and redesigning the board would create unnecessary risk. For a new design, compare it with a newer DSP based on required processing throughput, memory capacity, supported I/O, development-tool availability, lifecycle longevity, and system cost. A newer processor may simplify future development even when the older device remains technically sufficient.
Is TMS320C25FNL50 suitable for communications and control systems?
The TMS320C25FNL50 can suit communications and control systems that fit a second-generation fixed-point DSP architecture and its 50 MHz operating class. The device is appropriate for deterministic filtering, modulation-related processing, waveform generation, and embedded control algorithms when those functions match the available memory and peripherals. Confirm the serial, timer, memory, and interrupt resources in the device documentation before assigning an external communications interface.
How much power does TMS320C25FNL50 dissipate?
The exact TMS320C25FNL50 power dissipation cannot be stated without the device supply voltage, operating frequency, active code, and environmental conditions. Texas Instruments publishes the applicable electrical characteristics and switching information in the TMS320C25 datasheet. Calculate worst-case dissipation from the processor current, supply voltage, and any external I/O loading, then verify that the PLCC layout and copper area keep the junction temperature within its specified limit.
What PCB layout practices are important for TMS320C25FNL50?
Use the manufacturer-defined 68-pin PLCC land pattern, preserve the specified clock and memory-interface topology, and place decoupling capacitors close to the device power pins. Keep sensitive clock traces short, provide a continuous ground reference, and route address, data, and control signals away from high-current switching nodes. Review output drive, bus timing, and trace loading in the electrical specifications before releasing high-speed routing.
Where can I buy TMS320C25FNL50 and check current lead time?
Use the Request a Quote form on this page to request current TMS320C25FNL50 availability, lead time, quantity, and purchase terms. The verified distributor listings identify the exact 50 MHz device in a 68-pin PLCC package, but they do not provide a qualifying quantity-break price table for extraction. The quote request is the appropriate route for current commercial confirmation and allocation.
What is the price of TMS320C25FNL50?
Current TMS320C25FNL50 pricing is not stated as a fixed value on this page because price tiers change with quantity, market conditions, and inventory. Submit a Request a Quote request with the required quantity, packaging preference, and target delivery location. The resulting quotation should also confirm stock, lead time, and whether the order will be fulfilled as new, factory-sealed inventory.
Is TMS320C25FNL50 currently in stock?
Current TMS320C25FNL50 stock status must be confirmed through the Request a Quote form because the verified listings do not provide a reliable quantity-specific inventory statement for this order configuration. Request the required quantity, acceptable date code, and packaging details with the quote. For long-running programs, also request traceability and lifecycle information rather than relying on a listing headline.
What is the best drop-in replacement for TMS320C25FNL50?
No verified best drop-in replacement for the TMS320C25FNL50 was established from the available cross-reference results. Compatibility must be demonstrated against the 68-pin PLCC footprint, pin assignments, 50 MHz clocking, memory interface, electrical limits, interrupt behavior, and development-tool compatibility. Do not substitute a similar DSP solely by instruction set or clock rate; validate the complete pin and electrical comparison before changing a released design.
What is the best Texas Instruments equivalent for TMS320C25FNL50?
No additional Texas Instruments orderable part was verified as a pin-to-pin drop-in equivalent for the TMS320C25FNL50. The manufacturer product page remains the authoritative source for related TMS320C25 ordering options and lifecycle information. If the board footprint cannot change, request an official cross-reference review using the complete part number and system requirements, then verify software, timing, and environmental compatibility before substitution.

Données de référence d'ingénierie pour TMS320C25FNL50 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the TMS320C25FNL50 when maintaining a second-generation TMS320C25 design, reusing an established 68-pin PLCC layout, or running existing fixed-point code is more important than adopting a newer processor. Its 50 MHz clock-related rating, dedicated DSP architecture, and external memory-oriented design make it suitable for deterministic filtering, control, communications, and measurement functions. For a new system, compare processor throughput, memory capacity, serial interfaces, development tools, lifecycle status, and long-term availability against newer DSPs. Do not treat a similarly priced or similarly clocked processor as a drop-in substitute unless its PLCC pinout, electrical limits, memory interface, interrupt system, and software environment have all been demonstrated to match. No verified drop-in alternatives were established for the exact device.

Comparaison avec les alternatives

Paramètre Ce produit
Brand Texas Instruments
Package 68-pin PLCC (24.23 mm x 24.23 mm)
Processor Type Fixed-point digital signal processor
Processor Generation Second generation
Clock Frequency 50 MHz
Arithmetic Format Fixed-point
Architecture TMS320 second-generation DSP architecture
Mounting Type Surface mount

Principaux différenciateurs

  • Dedicated fixed-point processing at 50 MHz (vs Newer general-purpose DSP options)
  • Established 68-pin PLCC integration (vs Newer leadless or fine-pitch DSP packages)
  • Second-generation TMS320 family architecture (vs Third-generation or unrelated DSP families)

Notes de conception

Use the manufacturer-defined 68-pin PLCC land pattern and verify it against the package drawing before PCB release. Place power-decoupling components at the device supply pins, route clock signals away from memory outputs, and provide a low-impedance ground plane. Because this is a fine-pitch leaded package, inspect solder-joint fillets during assembly and avoid mechanical stress on the PLCC body and leads.

Treat the clock and memory-interface traces as a matched digital system rather than independent point-to-point connections. Keep clock routing short, match memory timing to the documented setup and hold requirements, and avoid stubs where possible. If the board must support external memories or slower peripheral devices, confirm their timing against the processor specifications rather than assuming standard bus behavior.

Do not select a PLCC footprint or pinout from package dimensions alone. Assign every signal from the device-specific pin-description table, including power, ground, clock, memory, interrupt, and control functions. Also verify the exact orderable suffix and operating grade: a related TMS320C25F designation must be confirmed to match the required 50 MHz performance, temperature range, and package before procurement.

Estimate processor dissipation using the operating supply voltage, processor current, clock activity, and external I/O loading, then compare the resulting junction-temperature rise with the manufacturer's limits. The 68-pin PLCC provides multiple connections, but copper spreading depends on the PCB land pattern and enclosure. Use the datasheet's maximum-current and operating-temperature conditions rather than typical values when making a worst-case thermal decision.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No device-specific compliance statements were present in the available manufacturer and distributor results.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

TMS320C25FNL50 datasheet TMS320C25FNL50 datasheet pdf TMS320C25FNL50 pinout TMS320C25FNL50 specifications TMS320C25FNL50 equivalent TMS320C25FNL50 replacement TMS320C25FNL50 cross reference TMS320C25FNL50 footprint TMS320C25FNL50 price TMS320C25FNL50 stock Texas Instruments TMS320C25FNL50 TMS320C25FNL50 50MHz DSP TMS320C25FNL50 68-PLCC TMS320C25FNL50 application circuit TMS320C25FNL50 vs TMS320C25FNL

Composants & termes associés

Texas Instruments TMS320C25FNL50 TMS320C25FNL TMS320C25 TMS320 second-generation DSP digital signal processor DSP fixed-point processor fixed-point arithmetic 50 MHz clock frequency 68-pin PLCC PLCC package family surface mount technology real-time signal processing digital filtering industrial control communications signal processing audio signal conditioning instrumentation and measurement external memory interface TMS320C25 product page
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ