TPA302D - 300mW Stereo Class-AB Amplifier | Texas Instruments
Référence : TPA302D ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
TPA302D Présentation
A Class-AB audio amplifier is a linear power-amplifier category that combines an analog input signal with transistor output stages capable of driving speakers and other finite loads. The TPA302D belongs to the broader hierarchy of audio amplifiers, audio ICs, analog signal-conditioning ICs, and semiconductor devices. Its stereo architecture supports two audio channels while its analog inputs permit direct connection to conventional audio sources.
Key features include shutdown control, internal mid-rail generation, thermal protection, and short-circuit protection. The device is also identified as a functional equivalent of the LM4880 in the supplied technical data. Its 8-pin SOIC package reduces board space and supports automated surface-mount assembly. The verified product information specifically identifies the amplifier as a 300 mW stereo Class-AB device with analog input.
The TPA302 architecture uses separate left and right amplification paths to provide stereo output from analog input signals. The internal mid-rail feature can support single-supply audio architectures, while shutdown control allows the system to place the amplifier in a lower-power state when audio is not required. The datasheet and product listing also indicate compatibility with 5 V and 3.3 V operation, which makes the device relevant to portable equipment, small consumer audio products, and low-voltage embedded systems.
Typical applications include compact stereo speakers, portable audio equipment, auxiliary audio products, USB or docking-system audio paths, and small embedded audio subsystems. The 8-ohm speaker-load target and 250 mW continuous average capability are suitable for low-to-moderate listening levels, although the available output power depends on supply voltage, load impedance, channel balance, thermal conditions, and signal level.
Designers should verify the SOIC footprint, supply decoupling, output-filter requirements, speaker wiring, thermal rise, and shutdown polarity against the manufacturer datasheet before layout release. The device is not a Class-D switching amplifier, so its output-stage dissipation and analog signal integrity should be checked carefully in continuous-use designs.
Alternatives de remplacement direct pour TPA302D — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec TPA302D (même facteur de forme et même empreinte) — différant par Package, Product Type, Short-Circuit Protection, Thermal Protection.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
TPA302DR
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →TPA302DG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TPA152D
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TPA112DGN
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TPA302D Valeurs maximales et caractéristiques électriques
| Product Type | Stereo analog-input audio power amplifier |
| Amplifier Class | Class-AB |
| Number of Channels | 2 channels |
| Rated Output Power | 300 mW |
| Continuous Average Output Power | 250 mW per channel into 8 ohm |
| Low-Power Output Specification | 60 mW at less than 0.06% THD+N |
| Supply Compatibility | 5 V and 3.3 V specified operation |
| Input Type | Analog input |
| Shutdown Control | Yes |
| Mid-Rail Generation | Internal |
| Thermal Protection | Internal |
| Short-Circuit Protection | Internal |
| Boîtier | 8-pin SOIC (D) |
| Type de montage | Surface mount |
| Functional Reference | LM4880 functional equivalent |
| DigiKey Classification | 2-channel stereo Class-AB amplifier IC |
| Manufacturer Product Page | TPA302 family |
Guide de configuration des broches du TPA302D 8-pin soic (d)
Configuration des broches du TPA302D (boîtier 8-pin soic (d)). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour TPA302D.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
TPA302D convient pour 6 applications: Compact Stereo Speaker, Portable Audio Product, USB or Docking Audio, Low-Power Embedded Audio, Auxiliary Audio Accessory, Small Portable Speaker.
Compact Stereo Speaker
The TPA302D fits compact stereo speakers because the verified device is a 300 mW, two-channel Class-AB amplifier with 250 mW continuous average output per channel into an 8-ohm load. Place the amplifier after the stereo analog source and drive the left and right speaker channels through the manufacturer-recommended output network. The 8-pin SOIC package helps reduce board area, while shutdown control can turn the amplifier off when the enclosure is inactive. Verify output filtering, speaker impedance, thermal rise, and maximum channel imbalance before production.
Recommandé
Portable Audio Product
TPA302D is relevant to portable audio products because the verified information specifies 3.3 V and 5 V operation, shutdown control, and low-power Class-AB output. The internal mid-rail function supports a compact single-supply signal path, which can simplify system partitioning around a codec or digital audio source. A design should still budget output-current capability, battery transient response, speaker efficiency, and heat dissipation. Shutdown can reduce consumption when playback is stopped, but the exact control voltage and timing must be taken from the datasheet.
Recommandé
USB or Docking Audio
The TPA302D can serve as the analog output stage in a docking speaker or USB-audio accessory when the upstream device provides left and right analog signals. Its two-channel architecture matches common stereo source formats, and the 8-pin SOIC package supports compact auxiliary boards. The verified 250 mW per-channel 8-ohm rating is appropriate for near-field listening at modest levels, not for high-volume consumer speakers. Add input filtering and decoupling close to the amplifier, and verify ground return paths to prevent channel crosstalk or audible noise.
Recommandé
Low-Power Embedded Audio
TPA302D is suitable for small embedded audio subsystems that need local speaker drive without a high-power switching amplifier. The specified 3.3 V compatibility, shutdown function, internal mid-rail generation, and internal protection features make it practical for embedded control products with intermittent audio use. System designers should confirm the amplifier’s supply-current behavior, startup timing, speaker startup transients, and thermal behavior. The device is an analog Class-AB amplifier, so the source and power rails must be quiet enough for the intended audio quality.
Recommandé
Auxiliary Audio Accessory
The TPA302D can be used in a small auxiliary audio accessory that accepts analog stereo input and drives two 8-ohm speakers. The verified product classification explicitly identifies a 2-channel stereo Class-AB amplifier in an 8-pin SOIC package. This arrangement is useful for desktop audio, educational kits, and simple control-panel speakers where the enclosure limits heat dissipation. Keep the analog input path short, provide the manufacturer-required bypass capacitors, and test both channels at the intended supply voltage. Use the verified 8-ohm rating as the design reference.
Recommandé
Small Portable Speaker
TPA302D is a practical choice for small portable speakers requiring more drive than a headphone output but not the power of a Class-D booster. Its 250 mW continuous average rating into 8 ohms and 60 mW low-distortion operating point support compact stereo products. The Class-AB topology avoids the switching characteristics of Class-D amplification but can dissipate more power from a DC supply, so battery and thermal design should be evaluated carefully. Confirm speaker sensitivity and enclosure limits before selecting this amplifier for a target maximum SPL.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TPA302D — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TPA302DR | TPA302DG4 | TPA152D | TPA112DGN |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SOIC-8 | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same |
Principaux différenciateurs
- Documented stereo output rating (vs TPA302D vs TPA112DGN)
- Specified low-voltage operation (vs TPA302D vs TPA302DR)
- Integrated fault protection (vs TPA302D vs TPA152D)
Notes de conception
The verified TPA302D rating is 250 mW continuous average power per channel into an 8-ohm load, while the family description identifies a 300 mW stereo output rating. Check the supply voltage, speaker impedance, channel loading, and thermal conditions against the datasheet before selecting the device. Place the required bypass capacitors close to the supply pins and route high-current output returns with low impedance.
Because the TPA302D is a Class-AB power amplifier in an 8-pin SOIC package, continuous stereo operation can generate heat in the output stages. Estimate power dissipation from the actual supply voltage, output voltage, and load current rather than relying only on the headline 300 mW rating. Use the manufacturer thermal information and provide adequate PCB copper, while leaving no assumption that internal thermal protection eliminates the need for thermal validation.
Keep analog input traces short and away from speaker-output and switching-node traces. Confirm the exact pin assignments from the official TPA302 datasheet before routing because the supplied data confirms the 8-pin SOIC package but does not include a verified pin table. Use a stable analog ground strategy, minimize return-loop area, and place input and supply bypass components close to their associated pins.
Do not treat the functional LM4880 equivalence as proof of a drop-in replacement. Functional equivalence can describe the intended audio role without guaranteeing identical pin mapping, supply limits, shutdown polarity, biasing, output topology, or thermal behavior. Verify the manufacturer datasheets and, when necessary, prototype the alternate part before redesigning an existing board.
Informations de conformité
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These values remain unknown rather than being inferred from the manufacturer or package.
