TPS1689 - 9-80V 20A Stackable eFuse PMBus | Texas Instruments
Référence : TPS1689 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.68 | $2 340,00 |
| 1 000 | $4.21 | $4 210,00 |
TPS1689 Présentation
An eFuse is an electronic circuit protection device that guards against overloads, short circuits, and excessive inrush current. Unlike traditional one-time fuses, eFuses are resettable and offer programmable current limits, making them essential for hot-swap applications where boards are inserted into live backplanes. The TPS1689 belongs to the hot-swap controller / integrated eFuse family within the broader power management IC hierarchy.
Key features include a PMBus interface for telemetry, control, and configuration, enabling real-time monitoring of voltage, current, and temperature. The integrated FET with RON of 3.65mOhm typ (3.5mOhm in newer datasheet revisions) minimizes conduction losses at 20A. Stackable operation allows multiple TPS1689x devices to be paralleled for higher current, with IMON pins tied together to report total current. The output withstands negative transient voltages up to -5V.
Technically, the integrated power FET eliminates external FET driving complexity of discrete hot-swap controllers, while PMBus-programmable current limits, slew rates, and fault responses provide design flexibility. Multiple protection modes cover overcurrent, overvoltage, undervoltage, and thermal shutdown, improving system-level reliability in power distribution trees.
Typical applications include 48V backplane hot-swap power, server and datacenter power distribution, telecom equipment, and industrial automation. The 9V-80V operating range fits 48V rails with transient headroom up to the 92V absolute maximum rating.
Design with the TPS1689 requires attention to thermal management: PCB copper area and thermal vias are essential at 20A continuous load. Configure PMBus registers so current-limit and fault-response settings match the application protection requirements.
Alternatives de remplacement direct pour TPS1689 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec TPS1689 (même facteur de forme et même empreinte) — différant par Absolute Maximum Input Voltage, Protection Modes.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
TPS1689x-Q1
✅ Remplacement direct✓ En stock
$3.36 / unité
Voir la fiche technique →TPS1685x
⚡ Même boîtier📋 Alternative de référence (hors catalogue)
TPS1663x
⚡ Même boîtier ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
TPS25990
⚡ Même boîtier ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ADP1048
⚡ Même boîtier ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
TPS1689 Spécifications
| Input Operating Voltage Range | 9 V to 80 V |
| Absolute Maximum Input Voltage | 92 V |
| Negative Output Transient Withstand | -5 V |
| Continuous Output Current | 20 A |
| Integrated FET ON-Resistance | 3.5 mOhm (typ) / 3.65 mOhm (typ, rev A) |
| Digital Interface | PMBus (telemetry, control, configuration) |
| Protection Modes | Overload, short circuit, inrush, overvoltage, undervoltage, thermal shutdown |
| Stackable / Parallel Operation | Yes (IMON pins tied together for total current reporting) |
| Telemetry Parameters | Voltage, current, temperature |
| Configuration | Programmable current limit, slew rate, fault response via PMBus |
| Type de montage | Surface Mount |
| Evaluation Module | TPS1689EVM |
Configuration des broches de TPS1689
| Broche [DATA_NEEDED] | IN — Input supply voltage (9V-80V) |
| Broche [DATA_NEEDED] | OUT — Protected output, withstands -5V transients |
| Broche [DATA_NEEDED] | GND — Ground reference |
| Broche [DATA_NEEDED] | IMON — Current monitor output, tie together for parallel total current |
| Broche [DATA_NEEDED] | PMBus SDA/SCL — PMBus telemetry, control, configuration interface |
| Broche [DATA_NEEDED] | EN/UVLO — Enable and undervoltage lockout programming |
Applications typiques
TPS1689 convient pour 6 applications: 48V Backplane Hot-Swap Power, Server and Datacenter Power Distribution, Telecom Equipment Protection, Industrial Automation Power Trees, Base Station and Radio Unit Power, Battery Test and Energy Storage Systems.
48V Backplane Hot-Swap Power
The TPS1689 fits 48V backplane hot-swap directly: its 9V-80V operating range covers 48V rails with surge headroom to the 92V absolute maximum, and the integrated 3.5mOhm FET minimizes conduction drop at 20A. Inserted between the backplane 48V feed and the load board, it limits inrush during card insertion and clears faults without mechanical fuses. PMBus telemetry reports live current and voltage, enabling predictive maintenance at rack level.
Recommandé
Server and Datacenter Power Distribution
In datacenter power trees, the TPS1689 acts as a protection and monitoring stage on 48V distribution rails feeding server sleds. The integrated FET at 3.5mOhm typ keeps conduction loss to roughly 1.4W at 20A, preserving energy efficiency, while programmable current limit and fault response coordinate with upstream DC-DC stages. The stackable parallel mode scales current beyond 20A, and IMON tie-together reporting gives fleet managers total current visibility over PMBus.
Recommandé
Telecom Equipment Protection
Telecom -48V systems benefit from the TPS1689 wide input range and -5V negative transient withstand at the output, guarding against ring transients and reverse events common on telecom power buses. The eFuse replaces discrete hot-swap FET plus controller solutions, saving board area while PMBus configuration lets field engineers adjust current limits remotely. Thermal shutdown and overvoltage lockout protect line cards during fault conditions on live backplanes.
Recommandé
Industrial Automation Power Trees
Industrial control cabinets and automation modules use the TPS1689 on 48V intermediate buses feeding PLC I/O and drive electronics. Programmable inrush limiting via PMBus allows safe capacitor charging on high-capacitance loads, while short-circuit protection clears wiring faults in milliseconds. The device active status enables design-in with standard industrial temperature hardware; verify exact operating range in the datasheet ordering table for the selected suffix.
Recommandé
Base Station and Radio Unit Power
Remote radio units and 5G base station power stages draw tens of amps from -48V/48V feeds, where the TPS1689 provides resettable protection with PMBus visibility for unmanned sites. The 80V rating tolerates lightning-induced surge margin per widebus input designs, and paralleling multiple TPS1689x devices scales to radio peak loads while tying IMON pins reports aggregate draw. Fast overcurrent trip protects expensive PA and digital sections from shorted line events.
Recommandé
Battery Test and Energy Storage Systems
High-voltage battery test racks and 48V energy storage systems use the TPS1689 to protect charge/discharge paths. The 9V-80V window spans common 48V battery bus variants, PMBus telemetry streams voltage and current for state monitoring, and programmable fault response distinguishes overload from inrush during contactor switching. Negative transient withstand (-5V) handles reverse events during battery reversal tests, improving instrumentation robustness.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TPS1689 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TPS1689x-Q1 | TPS1685x | ADP1048 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Stackable Parallel Operation | Yes (IMON tie-together) | Yes | Yes (shares IMON scheme with TPS1689x) | No |
Principaux différenciateurs
- PMBus digital telemetry on a 20A eFuse (vs TPS1663x)
- Stackable parallel operation with aggregate current reporting (vs TPS25990)
- Automotive grade sibling available (vs ADP1048)
Notes de conception
At 20A continuous load, conduction loss in the 3.5mOhm integrated FET is approximately I^2 x R = 1.4W. Provide generous PCB copper area under the exposed pad and an array of thermal vias to the inner layers to keep junction temperature within limits. Confirm theta_JA for the specific package suffix from the TI datasheet thermal table and verify worst-case ambient in the rack or cabinet environment.
Route the high-current IN-to-OUT path with wide traces or copper pours sized for 20A. Place input and output bulk capacitors close to the device to handle inrush events and to support the fast current-limit response. Keep the PMBus SDA/SCL traces short and away from the power loop to preserve telemetry signal integrity.
Do not exceed the 92V absolute maximum input rating; 48V rails with line transients require input TVS clamping with adequate margin. When paralleling multiple TPS1689x or TPS1685x devices, tie IMON pins together per the datasheet so total current is reported correctly, and ensure each device shares the same current-limit configuration to avoid current hogging.
Informations de conformité
Compliance not stated in reviewed sources; verify on TI product page. The TPS1689x-Q1 variant is automotive qualified.
