Texas Instruments

TUSB6020PFC - USB 2.0 OTG Dual-Role Controller | Texas Instruments

Référence : TUSB6020PFC ✓ Actif
3.3 V Vdss 80-pin TQFP Package 1.5 Mb/s Speed
MOQ : 1 |

TUSB6020PFC Présentation

The Texas Instruments TUSB6020PFC is a USB 2.0 high-speed On-The-Go dual-role controller with a VLYNQ serial-interface bridge, supporting USB low-speed at 1.5 Mb/s, full-speed at 12 Mb/s, and high-speed at 480 Mb/s in an 80-pin TQFP package measuring 12 mm by 12 mm.

A USB interface controller is an interface IC that coordinates transactions between a USB host or peripheral and an embedded system. The TUSB6020 belongs to the hierarchy of USB controllers, interface controllers, integrated interface ICs, and semiconductors. Its dual-role architecture supports a USB 2.0 OTG device while providing a local bus bridge to a VLYNQ-compatible device.

The integrated USB 2.0 PHY supports all three standard USB signaling rates, eliminating the need for a separate external USB transceiver in the intended application. The parallel interface and OTG role support make the device useful in portable synchronization, data acquisition, docking, and embedded data-transfer systems where USB connectivity must coexist with a dedicated local serial link.

TUSB6020PFC operates from a 3.3 V supply and is offered in an 80-TQFP package with a 12 mm by 12 mm body. The package exposes a substantial parallel and control interface rather than relying on a compact USB-C or USB 3 connector, making board layout and signal-integrity implementation the main engineering considerations. Verify the complete pin-description table and recommended external circuitry in the manufacturer datasheet before finalizing a PCB.

Typical applications include USB-to-VLYNQ local-bus bridges, portable test and measurement equipment, industrial data-acquisition systems, synchronization products, and embedded systems that need high-speed OTG transfer with device-role support. The controller is particularly relevant where the host processor requires a separate local-bus path while the product also connects to a USB 2.0 host.

Design around the manufacturer's recommended USB transceiver network, impedance-controlled differential routing, supply decoupling, and VLYNQ interface layout. Keep high-speed USB traces short, provide a continuous ground reference, follow the datasheet's differential impedance guidance, and reserve test access for enumeration, suspend, and resume troubleshooting.

This product page combines the controller's USB rates, OTG role, package details, interface use cases, drop-in ordering variants, and practical PCB guidance into an engineering-focused selection reference for USB 2.0 dual-role designs.

Alternatives de remplacement direct pour TUSB6020PFC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec TUSB6020PFC (même facteur de forme et même empreinte) — différant par Local Bus Interface, Package Body Size.

Texas Instruments
Local Bus Interface: VLYNQ serial interface with parallel interface
Package Body Size: 12 mm × 12 mm
Comparer avec TUSB6020PFC →

TUSB6020PFCG4

✅ Remplacement direct
📦 80-TQFP (12x12)
Same 80-TQFP package and stated functional characteristics; 0% difference in the identified package and principal performance ratings.

📋 Alternative de référence (hors catalogue)

TUSB6020PFCR

✅ Remplacement direct
Texas Instruments
📦 80-TQFP (12x12)
USB 2.0 high-speed OTG dual-role controller · USB 2.0 high-speed · VLYNQ serial interface with parallel interface · USB host and USB device dual-role operation · 1.5 V, 1.8 V, and 3.3 V · 78.1 mA · 0 °C to 70 °C · Commercial

Contactez-nous pour le prix

Voir la fiche technique →

TUSB6020PFCRG4

✅ Remplacement direct
📦 80-TQFP (12x12)
Same 80-TQFP package and stated functional characteristics; 0% difference in the identified package and principal performance ratings.

📋 Alternative de référence (hors catalogue)

TUSB6020PFC Spécifications

Product Type USB 2.0 high-speed OTG dual-role controller
Local Bus Interface VLYNQ serial interface
USB Low-Speed Signaling Rate 1.5 Mb/s
USB Full-Speed Signaling Rate 12 Mb/s
USB High-Speed Signaling Rate 480 Mb/s
Host Interface Parallel interface
Tension d'alimentation 3.3 V
Integrated PHY USB 2.0 PHY
USB Role Dual-role OTG controller
Package Type 80-pin TQFP
Package Dimensions 12 mm x 12 mm
Package Body Size 12 mm x 12 mm
Type de montage Surface mount
Datasheet Length 20 pages
Operating-Side Packaging Tray

Guide de configuration des broches du TUSB6020PFC 12 mm x 12 mm

Configuration des broches du TUSB6020PFC (boîtier 12 mm x 12 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 12 mm x 12 mm pour le TUSB6020PFC

Aucune donnée de brochage détaillée disponible pour TUSB6020PFC.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

TUSB6020PFC convient pour 6 applications: Portable USB 2.0 Synchronization Devices, Industrial Data-Acquisition Equipment, USB-to-VLYNQ Local-Bus Bridges, Test and Measurement Instruments, Embedded USB OTG Data Transfer, Industrial Docking and Service Systems.

📱

Portable USB 2.0 Synchronization Devices

The TUSB6020PFC fits portable synchronization products that exchange high-volume data with a USB 2.0 host while retaining a dedicated VLYNQ local-bus connection. Its integrated PHY supports 1.5 Mb/s, 12 Mb/s, and 480 Mb/s signaling, allowing the same controller to cover low-speed control traffic and full-speed or high-speed bulk transfers. The 3.3 V operating supply and 80-pin TQFP package simplify integration into compact, multilayer products. Designers should use a short controlled-impedance USB differential pair, place the required PHY network close to the controller, and route the VLYNQ interface away from switching and high-current power paths.

🏭

Industrial Data-Acquisition Equipment

TUSB6020PFC is appropriate for industrial data-acquisition systems that need a reliable USB 2.0 OTG connection and a separate local serial path to an acquisition or processing engine. The 480 Mb/s high-speed mode supports large data transfers, while dual-role operation can simplify cable-driven field-service and commissioning workflows. Its parallel host interface provides direct connectivity to suitable embedded processors, and the VLYNQ bridge provides a deterministic local-bus option. Layout should preserve continuous grounds, separate USB routing from switching converters, and use the manufacturer's recommended power and signal-conditioning networks. Confirm timing, operating limits, and isolation requirements for the final industrial system.

🔧

USB-to-VLYNQ Local-Bus Bridges

The TUSB6020PFC is designed around the USB-to-VLYNQ bridge use case, combining a USB 2.0 OTG dual-role controller with a local serial-interface controller. This makes it suitable for equipment that must move data between a USB host and a VLYNQ-compatible peripheral while preserving a dedicated local connection. Supporting all standard USB 2.0 rates provides flexibility for control and bulk-transfer workloads. The design should follow the datasheet's recommended USB transceiver network and VLYNQ termination or routing details. Controlled-impedance USB routing, short parallel-interface traces, and a low-impedance supply distribution network are essential to reliable operation across the supported signaling range.

📺

Test and Measurement Instruments

TUSB6020PFC can serve as the host-facing USB interface in programmable test and measurement equipment that also needs an embedded local-bus path. High-speed mode at 480 Mb/s is useful for transferring waveforms, configuration data, and large result files, while the OTG role adds flexibility when the instrument changes between host and peripheral operating arrangements. The parallel interface allows a compatible processor to manage enumeration and data transactions directly. Keep the USB differential pair away from analog inputs and relay-driver return currents, provide solid grounding around the PHY, and follow the manufacturer's layout recommendations to minimize coupling into precision measurement circuitry.

🧩

Embedded USB OTG Data Transfer

TUSB6020PFC supports embedded products that need to move data through USB 2.0 OTG and communicate locally over VLYNQ. The dual-role controller can support a design in which the product operates as a USB peripheral during synchronization and as a USB host during an alternative operating mode. Its integrated USB 2.0 PHY avoids adding a separate physical-layer device, while 3.3 V operation supports conventional embedded rails. The implementation should account for the different current and signal demands of host and peripheral roles. Validate the host-power path, protection devices, firmware state transitions, and USB enumeration sequence before production, and follow the datasheet for exact pin and timing requirements.

🖥️

Industrial Docking and Service Systems

TUSB6020PFC fits docking and service equipment that exchanges data with a USB 2.0 host and coordinates operations with an embedded peripheral over VLYNQ. The device's high-speed signaling can shorten transfers of configuration packages and service logs, while its local interface allows the system to preserve a direct path to attached hardware. The 80-pin TQFP package requires careful fanout on compact boards, so verify escape routing and avoid long stubs on the parallel interface. Apply controlled-impedance USB routing, maintain uninterrupted ground planes, and isolate connector transients with an appropriately engineered protection network. The exact external components and layout dimensions must follow the manufacturer reference design.

What is the TUSB6020PFC?
The TUSB6020PFC is a Texas Instruments USB 2.0 high-speed On-The-Go dual-role controller that bridges USB to a VLYNQ serial interface. According to the manufacturer datasheet, it includes an on-chip USB 2.0 PHY supporting 1.5 Mb/s, 12 Mb/s, and 480 Mb/s signaling. The device is intended for systems that need USB OTG connectivity alongside a local serial-bus link.
What USB speeds does TUSB6020PFC support?
The TUSB6020PFC supports all three USB 2.0 signaling rates: 1.5 Mb/s low speed, 12 Mb/s full speed, and 480 Mb/s high speed. According to the manufacturer datasheet, the USB 2.0 PHY is integrated on-chip, allowing the controller to handle USB physical signaling without the external PHY normally required by a host-side USB interface solution.
What package does TUSB6020PFC use?
The TUSB6020PFC uses an 80-pin TQFP package with a 12 mm by 12 mm body. Texas Instruments lists the part as a surface-mount USB interface controller, and distributor records identify the package as 80-TQFP. The package key used on this page is the default diagram because the available package library does not contain a dedicated 80-pin TQFP entry.
Where can I download the TUSB6020PFC datasheet PDF?
The official TUSB6020PFC datasheet PDF is available from the Texas Instruments product documentation link on this page. The datasheet is the primary source for the complete 80-pin description, electrical limits, timing values, application circuit, and VLYNQ interface details. Use the manufacturer's PDF rather than a third-party mirror when laying out a new design.
Where can I find the TUSB6020PFC pinout?
The TUSB6020PFC pinout is documented in the pin-configuration section of the manufacturer datasheet. The device has 80 TQFP pins and includes USB, VLYNQ, power, ground, control, and configuration functions. Because an exact verified pin-name list is not reproduced on this page, use the datasheet pin-description table when assigning every PCB net and checking reserved or unused terminals.
What is the TUSB6020PFC used for?
The TUSB6020PFC is used to add USB 2.0 OTG dual-role connectivity and a VLYNQ local-bus bridge to an embedded system. Typical uses include portable synchronization equipment, data-acquisition products, industrial controllers, and test systems that exchange data with a USB host while maintaining a separate local serial connection. Its 480 Mb/s high-speed mode supports demanding peripheral transfers.
Can TUSB6020PFC replace TUSB6020PFCG4?
TUSB6020PFCG4 is identified by the manufacturer-part cross-reference listing as a complete replacement for TUSB6020PFC, with consistent terminals, package, and main performance characteristics. Both use the 80-pin TQFP package. Confirm the exact ordering suffix, package drawing, and approved vendor list for production before treating the two orderable variants as interchangeable.
What can replace TUSB6020PFC?
The verified drop-in choices for TUSB6020PFC are the same-family Texas Instruments variants TUSB6020PFCG4, TUSB6020PFCR, and TUSB6020PFCRG4, all listed as using the same TQFP package and consistent functional characteristics. Their differences are ordering or packaging variants rather than major electrical redesigns. Verify the suffix against your purchasing and assembly requirements before substitution.
When should I choose TUSB6020PFC instead of TUSB6020PFCR?
Choose TUSB6020PFC when the required assembly format matches that exact suffix, and choose TUSB6020PFCR when its reel-oriented ordering format is specified for your production process. The manufacturer cross-reference describes both as pin- and package-consistent with the same main performance characteristics. The decision is therefore primarily an ordering, packing, and supply-planning issue rather than an electrical capability choice.
Is TUSB6020PFC suitable for a USB-to-VLYNQ bridge?
Yes, TUSB6020PFC is specifically suited to a USB-to-VLYNQ local-bus bridge because it combines a USB 2.0 OTG dual-role controller with the VLYNQ interface. It can operate at USB low, full, or high speed according to the connected host and device. Board-level suitability still depends on correct PHY layout, VLYNQ wiring, power distribution, and compliance with the interface timing requirements.
How should the TUSB6020PFC USB traces be routed?
Route the USB 2.0 differential pair as a controlled-impedance, continuously referenced pair on the same PCB layer, and minimize vias and branch stubs. Keep the USB PHY area away from switching nodes and high-current return paths, and follow the manufacturer's recommended passive network. These practices reduce reflections and radiated interference while preserving reliable operation at the 480 Mb/s high-speed signaling rate.
What power and thermal considerations apply to TUSB6020PFC?
The TUSB6020PFC operates from a 3.3 V supply. Place the manufacturer-recommended supply and bypass capacitors close to the relevant power pins, with particular attention to high-current return paths and ground-plane continuity. The 80-pin TQFP offers substantial lead area for thermal conduction, but actual dissipation and junction-temperature limits must be checked against the datasheet and the final board's copper and airflow conditions.
Is TUSB6020PFC in stock and what is its lead time?
Current stock, minimum order quantity, and production lead time for TUSB6020PFC should be confirmed through the Request a Quote form on this page. Distributor catalog records indicate that the part is offered, but a catalog listing alone does not guarantee immediately available inventory. Submit the required quantity, target date, and packaging suffix with the quote request for a current sourcing commitment.
Where can I buy TUSB6020PFC and check its price?
Use the Request a Quote form on this page to request the current TUSB6020PFC price, stock position, lead time, and orderable packaging quantity. The form allows the request to include the exact PFC suffix, production quantity, target date, and shipment destination. This approach avoids publishing stale pricing and supports purchasing against the specific assembly format required by the project.
What are the key specifications of TUSB6020PFC that engineers should know?
The key TUSB6020PFC specifications are USB 2.0 high-speed OTG operation, 1.5 Mb/s low-speed support, 12 Mb/s full-speed support, 480 Mb/s high-speed support, an integrated USB 2.0 PHY, a parallel host interface, a VLYNQ serial-interface bridge, 3.3 V operation, and an 80-pin 12 mm by 12 mm TQFP package. The manufacturer datasheet remains the controlling source for timing, limits, and pin assignments.

Données de référence d'ingénierie pour TUSB6020PFC — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose TUSB6020PFC when the project requires a USB 2.0 high-speed OTG dual-role controller with an integrated PHY, parallel host interface, and VLYNQ local-bus bridge. Choose TUSB6020PFCG4 when its manufacturer ordering designation is the approved configuration for the product. Choose TUSB6020PFCR or TUSB6020PFCRG4 when the corresponding ordering and packing format better matches the assembly process. The listed alternatives share the 80-pin TQFP package and are described as having consistent terminals and main performance characteristics, so selection should focus on approved ordering configuration rather than a functional redesign. Before release, verify the exact suffix, environmental limits, pin assignments, timing, compliance requirements, and lifecycle notices against the manufacturer datasheet. Do not replace the device with a generic USB controller unless the parallel interface, OTG behavior, VLYNQ function, PHY implementation, and software requirements are independently confirmed.

Comparaison avec les alternatives

Paramètre Ce produit TUSB6020PFCG4 TUSB6020PFCR TUSB6020PFCRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 80-TQFP (12x12) TQFP, 80 pins TQFP, 80 pins TQFP, 80 pins
Product Type USB 2.0 HS OTG dual-role controller USB 2.0 HS OTG dual-role controller USB 2.0 HS OTG dual-role controller USB 2.0 HS OTG dual-role controller

Principaux différenciateurs

  • Integrated OTG dual-role control with three USB 2.0 rates (vs TUSB6020PFCG4)
  • VLYNQ bridge function is retained across the ordering variants (vs TUSB6020PFCR)
  • No PCB conversion for listed ordering alternatives (vs TUSB6020PFCRG4)

Notes de conception

Implement the USB differential pair as a short, continuously referenced route with matched geometry and no unnecessary vias. Place the USB PHY passive network close to the controller according to the manufacturer application circuit, and keep connector transient-protection devices near the USB connector. A continuous ground reference beneath the pair is essential for controlling impedance and minimizing common-mode noise at the 480 Mb/s signaling rate.

Separate the USB and VLYNQ routing from noisy or high-current paths in the power system. Keep switching-regulator copper and inductors away from the controller's analog and interface areas, maintain a solid ground plane beneath signal routes, and avoid splitting the reference plane under high-speed signals. If the board requires a plane split, define a controlled return-current transition rather than routing the differential pair across an uncontrolled void.

Do not substitute a generic USB interface controller solely because it also supports USB 2.0. The TUSB6020PFC combines a parallel host interface, integrated USB 2.0 PHY, OTG dual-role operation, and a VLYNQ local-bus bridge in an 80-pin TQFP. Before replacing it, confirm pin mapping, local-bus functionality, operating limits, firmware expectations, and package geometry rather than relying on the USB protocol version alone.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No definitive compliance declarations were identified for the exact TUSB6020PFC ordering suffix. Check the manufacturer product page and current material declaration before qualification.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

TUSB6020PFC datasheet TUSB6020PFC pinout TUSB6020PFC datasheet pdf TUSB6020PFC equivalent TUSB6020PFC replacement TUSB6020PFC cross reference TUSB6020PFC vs TUSB6020PFCG4 TUSB6020PFC footprint TUSB6020PFC price TUSB6020PFC stock Texas Instruments TUSB6020PFC TUSB6020PFC USB OTG controller

Composants & termes associés

Texas Instruments TUSB6020PFC TUSB6020PFCG4 TUSB6020PFCR TUSB6020PFCRG4 USB 2.0 USB controller USB interface controller On-The-Go OTG dual-role controller integrated USB PHY VLYNQ serial interface parallel interface low speed full speed high speed 480 Mb/s 3.3 V 80-pin TQFP surface-mount package industrial data acquisition test and measurement portable synchronization embedded USB interface
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ