Texas Instruments

TUSB6020ZQE - USB 2.0 OTG Controller | Texas Instruments

Référence : TUSB6020ZQE ✓ Actif
1.8 V Vdss 80-ball BGA MICROSTAR JUNIOR Package
MOQ : 1 |

TUSB6020ZQE Présentation

Texas Instruments TUSB6020ZQE is a USB 2.0 high-speed on-the-go dual-role controller with a parallel interface, packaged in an 80-ball BGA MICROSTAR JUNIOR package measuring 5 x 5 mm. It supports USB 2.0 full-speed and high-speed operation and is designed to provide a seamless interface to the VLYNQ serial interface. The device also includes 1.5 V and 1.8 V supply domains identified in the manufacturer datasheet.

A USB controller is an interface integrated circuit that coordinates transactions between a USB host or peripheral and an embedded system. Within the broader hierarchy of interface ICs, USB controllers connect digital peripherals to a standardized bus, while dual-role controllers can support host, device, or on-the-go operating roles. The TUSB6020ZQE places USB connectivity and VLYNQ bridging functions in a compact surface-mount package suitable for space-constrained embedded equipment.

The TUSB6020ZQE supports USB 2.0 high-speed operation, including the 480 Mb/s signaling mode defined by the USB 2.0 specification. Its on-the-go dual-role architecture allows a system to negotiate the appropriate host or peripheral function when both roles are possible. The parallel interface provides a deterministic connection to compatible embedded logic, while the VLYNQ interface supports communication with compatible serial-side devices.

The 80-ball BGA MICROSTAR JUNIOR package supports dense PCB layouts while exposing power, ground, USB, parallel-interface, and VLYNQ connections through a ball-grid footprint. Manufacturer documentation identifies 1.5 V core-related rails and a 1.8 V rail in the power-domain naming. Because all balls carry dense signal assignments, PCB layout should follow the manufacturer footprint, escape-routing guidance, and recommended via and plane configurations without altering the land pattern.

Typical uses include USB-to-VLYNQ interface bridges, embedded test and measurement systems, industrial data-acquisition equipment, portable diagnostic controllers, and compact industrial or medical equipment requiring high-speed USB connectivity. Selection should account for the required USB role, parallel-bus timing, VLYNQ implementation, voltage rails, board area, and the exact 80-ball footprint.

A key implementation consideration is that the package is a large-ball-count BGA intended for controlled manufacturing processes. Inspect assembled joints for voiding, bridging, and solder-ball defects, and verify that the PCB stackup and assembly process support the package geometry. The USB differential pair also needs a controlled layout to preserve signal integrity at high-speed data rates.

This page consolidates the identified package, interface, voltage-domain, and sourcing information with same-footprint replacement analysis and practical PCB guidance. It highlights what must be checked before substituting a controller: the 80-ball footprint, USB role behavior, interface pinout, supply requirements, and application-specific timing.

The TUSB6020ZQE is a compact USB interface controller for systems that combine USB 2.0 connectivity with a parallel-to-VLYNQ interface path. Its 5 x 5 mm 80-ball BGA construction makes it especially relevant to dense industrial, test, communications, and embedded-control designs where connector space is limited.

Alternatives de remplacement direct pour TUSB6020ZQE — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec TUSB6020ZQE (même facteur de forme et même empreinte) — différant par Product Type.

Texas Instruments
Product Type: USB 2.0 dual-role OTG controller
Comparer avec TUSB6020ZQE →

TUSB6020ZQER

✅ Remplacement direct
Texas Instruments
📦 80-ball BGA MICROSTAR JUNIOR
USB 2.0 dual-role OTG controller · USB 2.0 · Dual-role controller with OTG support · Parallel interface · 80-ball VFBGA · ZQE · 5 x 5 mm · 0.5 mm

Contactez-nous pour le prix

Voir la fiche technique →

TUSB6020ZQE Spécifications

Product Type USB 2.0 high-speed OTG dual-role controller
USB Specification USB 2.0
USB Operating Modes Full-speed and high-speed
Host Interface Parallel interface
Serial Interface VLYNQ serial interface
Boîtier 80-ball BGA MICROSTAR JUNIOR
Package Dimensions 5 x 5 mm
Type de montage Surface mount
Logic Supply VDD_1.8V 1.8 V
Core Supply VDDCM 1.5 V
Core Supply VDD 1.5 V
Analog Supply VDDA 1.5 V
Digital Supply VDDD 1.5 V
I/O Interface Parallel interface
Controller Class OTG dual-role controller
Tray Packaging Tray

Guide de configuration des broches du TUSB6020ZQE 5 x 5 mm

Configuration des broches du TUSB6020ZQE (boîtier 5 x 5 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 5 x 5 mm pour le TUSB6020ZQE

Aucune donnée de brochage détaillée disponible pour TUSB6020ZQE.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

TUSB6020ZQE convient pour 6 applications: USB-to-VLYNQ Interface Bridge, Industrial Test and Measurement Equipment, Portable Diagnostic and Monitoring Controller, Embedded Data-Acquisition System, Industrial Communication Gateway, Programmable Logic Data Bridge.

🔧

USB-to-VLYNQ Interface Bridge

The TUSB6020ZQE fits embedded designs that need to bridge a parallel processor interface to a VLYNQ-connected peripheral. Its USB 2.0 high-speed OTG dual-role capability supports direct USB connectivity while the parallel interface provides a straightforward path to programmable logic or an application processor. The 5 x 5 mm 80-ball BGA preserves board area, but the design must allocate the 1.5 V and 1.8 V rails and implement the manufacturer-recommended USB routing. Validate host and device enumeration, bus timing, VLYNQ protocol behavior, and firmware assumptions before production.

🏭

Industrial Test and Measurement Equipment

TUSB6020ZQE is appropriate for compact test equipment that combines a host computer with embedded acquisition or control logic. USB 2.0 high-speed operation provides the high-speed data path, while the parallel interface can connect to a processor or FPGA and the VLYNQ interface can support a compatible peripheral subsystem. The 80-ball BGA limits connector and routing space in benchtop or portable enclosures. Designers should use the manufacturer pin table for every ball assignment, preserve controlled-impedance USB routing, and verify thermal performance under sustained high-speed traffic.

💊

Portable Diagnostic and Monitoring Controller

The TUSB6020ZQE can support portable diagnostic equipment that needs dual-role USB connectivity and a direct embedded interface. A host computer can recognize the equipment as a peripheral, while OTG capability provides flexibility when the device must act as a USB host for an attached accessory. The parallel and VLYNQ interfaces allow the controller to bridge distinct internal data paths. Its compact 5 x 5 mm BGA is useful for handheld packaging, although low-power operation, wake behavior, ESD protection, cable routing, and battery-rail sequencing require careful system-level validation.

🖥️

Embedded Data-Acquisition System

TUSB6020ZQE suits embedded acquisition systems that transfer records from parallel-side logic to a USB host. The high-speed USB path supports efficient data movement, while the parallel interface gives a processor or FPGA a fixed-width connection to converters and local memory. A VLYNQ side can add compatible serial peripherals without forcing those devices onto the USB bus. Keep the USB differential pair away from noisy analog and switching nodes, follow the recommended ball escapes, and verify sustained transfer throughput because host scheduling, firmware processing, and signal integrity can limit actual performance.

🌐

Industrial Communication Gateway

TUSB6020ZQE can serve as the USB-facing controller in an industrial gateway that bridges an embedded processor to downstream VLYNQ peripherals. USB 2.0 high-speed communication allows the gateway to connect to configuration tools or supervisory software, while the parallel interface supports deterministic integration with local control logic. The dual-role OTG function can assist systems that also need to configure an attached USB device. Because industrial environments can introduce conducted noise and ESD events, use appropriate protection, grounding, isolation, and enclosure strategies without altering the controller's high-speed signal paths.

⚡

Programmable Logic Data Bridge

TUSB6020ZQE is suitable for a programmable-logic-centered bridge in which an FPGA accepts parallel transactions and exposes a USB path while coordinating compatible VLYNQ peripherals. The fixed parallel interface can simplify the FPGA-side transaction layer, while OTG role support expands deployment flexibility. The 80-ball BGA supports dense routing, but the design must comply with ball pitch, escape-routing, via-in-pad, solder-mask, and assembly requirements for reliable assembly. Validate timing margins, USB compliance, power sequencing, and thermal conditions across the intended operating range before releasing the PCB.

What is the TUSB6020ZQE?
The TUSB6020ZQE is a Texas Instruments USB 2.0 high-speed on-the-go dual-role controller with a parallel host interface and a VLYNQ serial interface. It is packaged in an 80-ball BGA MICROSTAR JUNIOR package measuring 5 x 5 mm. According to the manufacturer datasheet, the device supports USB full-speed and high-speed operation and is intended to provide a seamless interface between the parallel and VLYNQ sides of an embedded system.
What are the key specifications of TUSB6020ZQE that engineers should know?
The TUSB6020ZQE is a USB 2.0 full-speed and high-speed OTG dual-role controller with a parallel interface, VLYNQ serial interface, and 80-ball BGA package. Manufacturer documentation identifies 1.5 V VDDCM, VDD, VDDA, and VDDD rails along with a 1.8 V VDD_1.8V rail. Its 5 x 5 mm MICROSTAR JUNIOR package is the primary mechanical constraint when planning routing, assembly, and board layout.
Where can I download the TUSB6020ZQE datasheet PDF?
The TUSB6020ZQE datasheet PDF can be accessed through the Texas Instruments documentation link listed on this page. It describes the USB 2.0 high-speed OTG dual-role controller, VLYNQ interface, supply rails, package information, and connection details. The document is also mirrored by Datasheets.com and AllDataSheet, where the same part is indexed under TUSB6020ZQE.
Where can I find the TUSB6020ZQE pinout?
The TUSB6020ZQE pin assignments and ball map are located in the pin-configuration section of the manufacturer datasheet. The device uses an 80-ball BGA MICROSTAR JUNIOR package, so each numbered ball must be checked against the land pattern before PCB routing. Use the package drawing, pin table, and recommended footprint together; connector labels alone do not fully describe the ball-grid interface.
Is TUSB6020ZQE suitable for high-speed USB applications?
Yes, TUSB6020ZQE is suitable for applications requiring USB 2.0 high-speed operation because the manufacturer identifies it as a USB 2.0 high-speed on-the-go dual-role controller. Its parallel interface connects to embedded logic, while the VLYNQ interface supports compatible serial-side devices. Signal integrity still depends on correct differential-pair routing, controlled impedance, clean power delivery, and assembly quality.
What interface does TUSB6020ZQE use?
TUSB6020ZQE uses a parallel interface on the embedded-host side and a VLYNQ serial interface on the connected device side. The manufacturer describes the controller as providing a seamless interface between these interfaces. This division of duties makes it useful in systems where a parallel processor or programmable logic device must communicate with a peripheral implementation behind a VLYNQ link.
What supply voltages does TUSB6020ZQE use?
The manufacturer datasheet identifies VDD_1.8V at 1.8 V and VDDCM, VDD, VDDA, and VDDD at 1.5 V. These domains support the controller's internal USB, logic, analog, and digital functions and must be generated according to the timing and decoupling recommendations in the manufacturer documentation. Incorrect rail sequencing or inadequate decoupling can compromise USB operation.
Where can I buy TUSB6020ZQE online?
Use the Request a Quote form on this page to request TUSB6020ZQE availability, current commercial terms, and the correct package and shipping configuration. The manufacturer suffix ZQE denotes the specified 80-ball BGA MICROSTAR JUNIOR configuration. Confirm the complete MPN, tray or reel preference, quantity, and delivery location before authorizing an order.
What is the price of TUSB6020ZQE?
Use the Request a Quote form on this page for the current TUSB6020ZQE commercial price. Pricing can vary with order quantity, availability, and the requested delivery configuration, so the page does not publish a static price claim. Include the exact MPN, quantity, target date, and shipping location in the request to obtain a current quotation.
What is the lead time for TUSB6020ZQE?
The current lead time should be requested through the Request a Quote form on this page because it depends on stock, order quantity, package configuration, and manufacturing status. The exact TUSB6020ZQE ordering code must be confirmed before scheduling production. Submit the planned order quantity and required arrival date so the commercial response can reflect the actual demand.
Is TUSB6020ZQE in stock?
Current TUSB6020ZQE inventory should be confirmed through the Request a Quote form on this page. Stock status can change with order volume, incoming supply, and packaging requirements, particularly for an 80-ball BGA device. State the required quantity, tray or reel format, inspection level, and target delivery date to receive an availability confirmation.
What is the best drop-in replacement for TUSB6020ZQE?
TUSB6020ZQER is the identified same-footprint drop-in candidate for TUSB6020ZQE. It retains the 80-VFBGA package and is described as having consistent main performance parameters, functional characteristics, terminals, and packages, allowing replacement without modification. Production use should still verify rail sequencing, firmware support, USB enumeration behavior, and every ball assignment against the manufacturer documentation.
Can TUSB6020ZQER replace TUSB6020ZQE?
Yes, TUSB6020ZQER can serve as a drop-in replacement candidate because the comparison identifies consistent terminals and packages with no PCB modification required. Both parts use the 80-ball BGA class of package, so the existing land pattern can be retained. Confirm the exact package drawing, pin functions, electrical limits, temperature range, and ordering information before production substitution.
What can replace TUSB6020ZQE?
TUSB6020ZQER is the closest identified replacement because it uses the same 80-ball footprint and is reported to maintain consistent terminals, packages, performance parameters, and functional characteristics. A valid engineering substitution also requires checking USB host/device role behavior, parallel-bus timing, VLYNQ compatibility, firmware or driver assumptions, and power sequencing. PCB changes are not expected from the identified comparison.
TUSB6020ZQE vs TUSB6020ZQER - which is better for a new design?
TUSB6020ZQER is the direct same-footprint option when its ordering format and supply terms fit the new design, because the comparison reports consistent terminals, packages, performance parameters, and functional characteristics. TUSB6020ZQE remains the reference configuration for a design that specifically calls out that MPN. The decision should also account for procurement status, assembly format, thermal requirements, and any firmware restrictions.
When should I choose TUSB6020ZQE instead of another USB interface controller?
Choose TUSB6020ZQE when the design specifically needs a USB 2.0 high-speed OTG dual-role controller, a parallel embedded interface, a VLYNQ serial interface, and the 80-ball BGA MICROSTAR JUNIOR footprint. It is less suitable when a simpler USB transceiver, Type-C controller, or USB hub is required without VLYNQ and OTG role support. Confirm the system architecture and pin-level requirements before selecting the controller.

Données de référence d'ingénierie pour TUSB6020ZQE — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose TUSB6020ZQE when the design requires USB 2.0 full-speed and high-speed OTG dual-role operation together with both parallel and VLYNQ interfaces in an 80-ball BGA MICROSTAR JUNIOR package. TUSB6020ZQER is the preferred same-footprint substitute when procurement or assembly format favors that ordering code, because its terminals, package, and main performance characteristics are reported as consistent. Neither alternative should be selected solely by package name: verify the complete ball map, power sequencing, USB enumeration behavior, parallel timing, and VLYNQ firmware assumptions. If the system needs only a USB hub, Type-C controller, or conventional USB transceiver without VLYNQ bridging, choose the corresponding dedicated device instead of imposing the additional BGA and interface complexity of TUSB6020ZQE.

Comparaison avec les alternatives

Paramètre Ce produit TUSB6020ZQER
Package 80-ball BGA MICROSTAR JUNIOR 80-ball BGA MICROSTAR JUNIOR
Brand Texas Instruments Texas Instruments
Controller Type USB 2.0 OTG dual-role controller USB 2.0 OTG dual-role controller
USB Speed Support Full-speed and high-speed Full-speed and high-speed
Host Interface Parallel interface Parallel interface
Serial Interface VLYNQ serial interface VLYNQ serial interface
Supply Rails 1.5 V and 1.8 V 1.5 V and 1.8 V
Package Dimensions 5 x 5 mm 5 x 5 mm
Footprint Compatibility Reference 80-ball MICROSTAR JUNIOR footprint Same terminals and package; no modification required
Ordering Format TUSB6020ZQE TUSB6020ZQER

Principaux différenciateurs

  • Pin-compatible same-family replacement path (vs TUSB6020ZQER)
  • Combined OTG and VLYNQ connectivity (vs TUSB6020ZQER)
  • Space-efficient integration for embedded systems (vs TUSB6020ZQER)

Notes de conception

Route the USB differential pair as a controlled-impedance pair directly between the TUSB6020ZQE and the external connector or transceiver, following the manufacturer layout guidance. Keep the pair continuous, minimize vias and stubs, and avoid placing switching nodes or high-current return paths nearby. Confirm the PCB stackup and impedance calculation before fabrication because the high-speed USB performance depends on physical geometry as well as controller operation.

Implement separate 1.5 V and 1.8 V supply networks exactly as identified in the manufacturer power-domain documentation. Place local decoupling capacitors at the corresponding power balls with short ground returns, and use the datasheet's recommended capacitance, voltage rating, and ESR limits. Also verify power-up and power-down sequencing for all domains, since incorrect sequencing can create transient current or prevent reliable startup.

The 80-ball BGA requires deliberate escape routing between dense pitch and the host parallel interface, VLYNQ signals, and USB pins. Follow the manufacturer footprint and land-pattern dimensions without changing pad geometry, and validate the assembly process against the selected ball pitch and board density. Run DRC and connectivity reviews against the complete pin table because one mistaken ball assignment can affect multiple power, interface, or ground domains.

Do not treat a matching BGA outline as proof of interchangeability. For a TUSB6020ZQER substitution, verify ball functions, USB role behavior, electrical limits, temperature range, supply sequencing, and the exact package drawing. Also check whether host software, firmware, or driver assumptions depend on the TUSB6020ZQE ordering code. A production substitution should be approved against the manufacturer documentation and tested with the intended peripheral set.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance attributes were not identified in the product documentation excerpts. AEC-Q100 status is reported as unknown rather than not_applicable because the qualification status of this exact MPN was not established.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

TUSB6020ZQE datasheet TUSB6020ZQE datasheet pdf TUSB6020ZQE pinout TUSB6020ZQE specifications TUSB6020ZQE equivalent TUSB6020ZQE replacement TUSB6020ZQE cross reference TUSB6020ZQE vs TUSB6020ZQER Texas Instruments TUSB6020ZQE TUSB6020ZQE 80 BGA TUSB6020ZQE USB 2.0 OTG TUSB6020ZQE VLYNQ interface TUSB6020ZQE price TUSB6020ZQE stock

Composants & termes associés

Texas Instruments TUSB6020ZQE TUSB6020ZQER USB 2.0 USB controller on-the-go controller OTG dual-role controller VLYNQ parallel interface high-speed USB full-speed USB 80-ball BGA MICROSTAR JUNIOR 5 x 5 mm package surface-mount package interface IC semiconductor 1.5 V power rail 1.8 V power rail USB differential pair embedded data acquisition industrial communication programmable logic bridge
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ