USB2412-DZK - 2-Port USB 2.0 Hub Controller | Microchip
Référence : USB2412-DZK ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
USB2412-DZK Présentation
A USB hub controller is an interface IC that manages traffic between one upstream USB host connection and multiple downstream USB ports. The USB2412 belongs to the USB interface-controller hierarchy, where USB 2.0 connectivity, transaction translation, port management, and embedded system integration combine into a dedicated hub solution. Its single Transaction Translator, or STT, architecture is intended to reduce implementation complexity in compact USB hub designs.
The verified product information identifies two downstream ports, USB 2.0 operation, low-power operation, and support for low-speed, full-speed, and high-speed downstream devices when the hub operates at high speed. The controller is available in a 28-QFN package, while distributor records identify the package as 28-VFQFN with an exposed pad. The USB interface supports system integration with embedded USB host, peripheral, docking, and industrial equipment designs.
The 3 V to 3.6 V operating supply range places the device in a low-voltage digital interface class. USB data integrity depends on correct PCB routing, adequate power distribution, compliant connector implementation, and proper decoupling. The exposed-pad package requires attention to thermal and layout practices, even though the verified snippets do not provide a complete electrical limit table or detailed power-consumption values.
Typical applications include two-port embedded USB hubs, self-powered USB equipment, industrial control systems, test and measurement fixtures, docking equipment, and compact host systems that need USB device expansion. The two-port architecture is useful when a system must connect peripherals without adding multiple independent host controllers.
When selecting a replacement, verify the complete pinout, package dimensions, exposed-pad connection, USB signal routing, clock requirements, and power sequencing against the original design. The USB2412-DZK-TR is a tape-and-reel ordering variant, while other listed controllers or transceivers may provide different functions and must not be treated as drop-in substitutes without manufacturer verification.
This page consolidates the verified manufacturer description, distributor package data, official datasheet link, application guidance, and cross-reference findings to support engineering selection. It distinguishes confirmed USB2412 attributes from parameters that require the manufacturer datasheet or an authorized design review.
Alternatives de remplacement direct pour USB2412-DZK — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
USB2412-DZK-TR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
USB2412
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
USB82642AM-A-000528
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
USB82642AM-A-000528-V02
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
USB82642AM-A-000528-V05
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
USB2412-DZK Spécifications
| Product Type | USB 2.0 hub controller IC |
| Downstream Port Count | 2 ports |
| Upstream Interface | USB 2.0 |
| Supported Downstream Speeds | Low-speed, full-speed, and high-speed |
| Transaction Translator Architecture | Single Transaction Translator (STT) |
| Supply Voltage Range | 3 V to 3.6 V |
| Controller Category | USB hub controller |
| Boîtier | 28-QFN |
| Package Description | 28-VFQFN with exposed pad |
| Package Pin Count | 28 pins |
| Type de montage | Surface mount |
| Interface Classification | USB interface controller |
| Application Category | Embedded USB hub |
Guide de configuration des broches du USB2412-DZK 28 pins
Configuration des broches du USB2412-DZK (boîtier 28 pins). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour USB2412-DZK.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
USB2412-DZK convient pour 6 applications: Embedded Two-Port USB Hub, Industrial Control USB Expansion, Self-Powered USB Peripheral Hub, Test and Measurement USB Fixture, USB Docking and Service Equipment, Compact Embedded Host System.
Embedded Two-Port USB Hub
The USB2412-DZK fits embedded equipment that needs one USB host connection to serve two downstream peripherals. Its confirmed two-port USB 2.0 hub architecture reduces the need for separate hub controllers, while STT operation supports low-speed, full-speed, and high-speed devices when the hub operates at high speed. The 3 V to 3.6 V supply range and 28-QFN package suit compact embedded designs. Designers should allocate connector power, protection, and routing resources around the controller and confirm firmware support for enumeration and device-specific power requirements.
Recommandé
Industrial Control USB Expansion
USB2412-DZK can add peripheral connectivity to industrial control equipment without requiring a separate host interface for each port. The confirmed support for low-speed and full-speed devices is useful for control peripherals, while high-speed support is available when the hub operates as a high-speed hub. In an industrial enclosure, the design should include surge and ESD protection, defined connector current limits, isolation requirements where applicable, and careful separation between USB routing and noisy power or motor circuits. The controller’s 3 V to 3.6 V supply range supports integration into embedded 3.3 V systems.
Recommandé
Self-Powered USB Peripheral Hub
The USB2412-DZK is suitable for self-powered equipment that exposes two USB ports to external devices. Its two downstream ports allow the host system to manage peripherals such as keyboards, storage, communications adapters, or service interfaces. Because the verified data does not specify USB power-current limits or operating current, the power supply must be sized from the system’s actual device-load requirements and the applicable USB standard. The controller should be paired with protection and filtering appropriate to exposed connectors, while preserving controlled-impedance differential routing from the QFN pins to the connectors.
Recommandé
Test and Measurement USB Fixture
USB2412-DZK can be used in test and measurement fixtures that need to bring two external USB devices onto one embedded host interface. The controller’s two downstream ports provide a straightforward expansion path for instrumentation, configuration adapters, and service peripherals. The USB 2.0 specification and low-, full-, and high-speed support make the device broadly adaptable, but the host software must handle enumeration, driver loading, and bus-power limits. Layout should minimize USB trace length and discontinuities, while grounding and shielding should follow the enclosure and connector implementation.
Recommandé
USB Docking and Service Equipment
USB2412-DZK is applicable to docking and service equipment that consolidates two external USB connections around an embedded controller. Its two-port architecture can simplify mechanical and firmware planning compared with two unrelated host interfaces, while the 28-QFN package supports compact board construction. Dock designs should account for connector insertion forces, ESD exposure, cable faults, device-disconnect events, and power-cycle behavior. Firmware must also support the intended operating-system USB stack and validate any device classes that may be connected through either downstream port.
Recommandé
Compact Embedded Host System
USB2412-DZK can expand USB connectivity in compact embedded host systems that require peripherals beyond the host processor’s direct port budget. The single Transaction Translator architecture and two downstream ports provide a focused USB 2.0 hub function without requiring a larger multi-port hub controller. The 3 V to 3.6 V operating range is compatible with common embedded digital rails, although the complete power and timing requirements must be checked in the official datasheet. Board-level validation should include hot-plug behavior, suspend and resume, device brownout behavior, and simultaneous-load testing.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour USB2412-DZK — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | USB2412-DZK-TR | USB2412 | USB82642AM-A-000528 | USB82642AM-A-000528-V02 | USB82642AM-A-000528-V05 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Ordering Suffix | USB2412-DZK | Tape-and-reel suffix | Base device listing | -000528 | -V02 | -V05 |
Principaux différenciateurs
- Confirmed two-port embedded USB hub architecture (vs USB82642AM-A-000528)
- Explicit STT hub implementation (vs USB2412-DZK-TR)
- Verified low-power 3 V to 3.6 V operating range (vs USB82642AM-A-000528-V02)
- Confirmed support for low-, full-, and high-speed downstream devices (vs USB82642AM-A-000528-V05)
Notes de conception
Route the USB high-speed differential pairs as controlled-impedance traces with continuous reference planes and minimize stubs, vias, and unnecessary copper changes. Keep the USB data pairs away from switching nodes and high-current power paths. Place connector-side protection and filtering close to the connector, while maintaining the return-current path so that common-mode noise is not injected into the USB data pairs.
Confirm the complete electrical current, power-state, and USB bus-power requirements in the manufacturer datasheet before selecting the system supply and connector protection. The verified data confirms a 3 V to 3.6 V controller supply range but does not provide a full current table. Decoupling should follow the datasheet recommendations and be placed close to the supply pins, with additional bulk energy storage placed according to the load-transient profile.
Use the exposed pad according to the official 28-QFN land-pattern guidance. Provide thermal vias and a suitable copper area without compromising USB return paths or isolation clearances. Thermal performance depends on the PCB stackup, copper area, via arrangement, and enclosure airflow, so estimate junction temperature with the manufacturer’s package data rather than relying only on nominal package size.
Do not treat USB2412-DZK, USB2412-DZK-TR, or the base USB2412 listing as interchangeable solely because their names are similar. Verify the exact ordering code, package, pinout, firmware assumptions, and electrical characteristics. Likewise, do not assume that another USB controller is a drop-in replacement: the supplied data explicitly says USB2412-DZK is not pin-to-pin compatible with TUSB2046B because the package and integration differ.
Informations de conformité
The supplied verified results identify the manufacturer, USB function, supply range, package, and official datasheet, but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance fields therefore remain unknown rather than inferred.
