VSC7422XJQ-02 - 25-Port Gigabit Ethernet Switch | Microchip
Référence : VSC7422XJQ-02 ✓ ActifVSC7422XJQ-02 Présentation
A Gigabit Ethernet switch is a semiconductor that receives Ethernet frames on multiple ports, inspects destination addresses, and forwards traffic toward the appropriate attached device. Within the network-equipment hierarchy, the VSC7422XJQ-02 sits between a network processor or system controller and physical copper links. As a Layer 2 switch, it provides the physical and data-plane foundation for Ethernet aggregation, access equipment, industrial gateways, and carrier-facing terminal systems.
The principal integration advantage is the combination of 25 switch ports and 12 copper PHYs in one package. According to the manufacturer datasheet family, pairing the VSC7422 with a VSC8512 or VSC8522 12-port PHY can produce a 25-port switching solution using only two ICs. This approach reduces board area compared with a design assembled from many discrete Ethernet PHYs, while preserving the familiar Layer 2 forwarding function across copper and uplink connections.
The -02 ordering code is associated with the VSC7422-02 datasheet family, which covers the VSC7420-02, VSC7421-02, and VSC7422-02 Gigabit Ethernet switches. The target device is supplied in a 302-TQFP, 24 mm by 24 mm package according to distributor product records. Its large lead count supports the extensive combination of switch ports, SerDes interfaces, copper PHY circuitry, reference clocks, power rails, management signals, and configuration pins required by a carrier-grade multiport Ethernet device.
Typical deployments include telecommunications access equipment, industrial Ethernet aggregation, network-interface appliances, and embedded systems that need many Gigabit Ethernet connections. A companion PHY such as the VSC8512 can extend the number of copper ports, while the switching device handles frame forwarding between the integrated PHYs, additional PHY ports, and uplink links. The design must account for high-speed differential routing, controlled clocking, uninterrupted power delivery, thermal performance, and Ethernet magnetics requirements.
The principal engineering trade-off is package complexity. A 302-pin TQFP offers extensive connectivity in a surface-mount format, but every assigned signal must be mapped carefully because there are many high-speed and power pins. Follow the pin-description table and recommended reference layout in the manufacturer datasheet rather than relying on a generic 302-pin symbol. Decoupling, return paths, clock-source placement, and copper-impedance control are especially important when integrating this switch into a multilayer PCB.
This product overview combines the verified manufacturer family description, package information, architecture, application context, and practical PCB considerations. It also distinguishes the confirmed operating characteristics from detailed electrical parameters that must be taken directly from the official VSC7422-02 datasheet before release to production.
Alternatives de remplacement direct pour VSC7422XJQ-02 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesVSC7422XJQ-02 Valeurs maximales et caractéristiques électriques
| Product Type | Integrated Gigabit Ethernet Layer 2 switch |
| Total Switch Ports | 25 ports |
| Integrated Copper PHY Ports | 12 ports |
| Integrated PHY Data Rate | 1000 Mbps per port |
| Copper PHY Type | 12 integrated copper PHYs |
| Network Layer | Layer 2 Ethernet switching |
| Process Technology | 25 um |
| Product Family | SparX-III |
| Boîtier | 302-pin TQFP |
| Package Dimensions | 24 mm x 24 mm |
| Type de montage | Surface mount |
| Ethernet Media Support | 1000BASE-T copper |
| AEC-Q100 Qualification | not_applicable |
Guide de configuration des broches du VSC7422XJQ-02 24 mm x 24 mm
Configuration des broches du VSC7422XJQ-02 (boîtier 24 mm x 24 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour VSC7422XJQ-02.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
VSC7422XJQ-02 convient pour 6 applications: Telecommunications Access Equipment, Industrial Ethernet Gateway, Enterprise Network-Edge Appliance, Secure Network Appliance, Networked Industrial Control System, Video and Surveillance Aggregation.
Telecommunications Access Equipment
The VSC7422XJQ-02 fits access and aggregation equipment that needs many Gigabit Ethernet connections without implementing every copper interface as a separate PHY. Its confirmed 25-port Layer 2 switching architecture and 12 integrated 1000BASE-T PHYs provide a centralized forwarding fabric close to the line cards. A companion VSC8512 or VSC8522 can extend copper-port capacity while preserving a two-IC switching approach. The design must provide clean supplies, controlled clocks, and careful high-speed return-path routing to sustain reliable frame forwarding across all ports.
Recommandé
Industrial Ethernet Gateway
The VSC7422XJQ-02 is appropriate for an industrial gateway that combines upstream connectivity with numerous local copper Ethernet interfaces. The 25-port switch allows multiple sensors, controllers, and service equipment to share a Layer 2 forwarding domain, while the 12 integrated copper PHYs reduce the number of separate Ethernet interface ICs on the board. For industrial deployment, verify the selected temperature grade and isolation requirements against the manufacturer datasheet, and reserve copper for robust Ethernet magnetics and surge-protection components.
Recommandé
Enterprise Network-Edge Appliance
A network-edge appliance can use the VSC7422XJQ-02 to aggregate numerous 1000BASE-T service connections behind a higher-speed uplink. The integrated Layer 2 switch provides a single packet-forwarding point for attached devices, and the 12 on-package copper PHYs shorten the path between the switch fabric and board-level connectors. The principal engineering consideration is that a 302-pin TQFP demands meticulous signal assignment, multilayer stack-up planning, and validated impedance control for every high-speed differential route.
Recommandé
Secure Network Appliance
The VSC7422XJQ-02 can serve as the Ethernet switching foundation in a firewall, secure gateway, or surveillance appliance with many internal and external ports. Its 25-port switch architecture allows local traffic to be forwarded efficiently while uplinks connect the appliance to a broader network. The 12 integrated copper PHYs simplify board partitioning around connector locations. Designers should follow the manufacturer layout guidance for clocking, power distribution, and high-speed differential routing to minimize signal-integrity risk in a security-focused platform.
Recommandé
Networked Industrial Control System
The VSC7422XJQ-02 is suitable for centralized control equipment that must connect programmable controllers, vision systems, motion modules, and supervisory computers over Gigabit Ethernet. Its 12 integrated copper PHYs reduce repeated PHY circuitry, while the 25-port switch capacity supports substantial local topology flexibility. Use the official reference design to plan the 302-TQFP footprint and maintain continuous power and ground distribution. Environmental and operational-temperature requirements should be checked separately for the intended control cabinet and operating environment.
Recommandé
Video and Surveillance Aggregation
The VSC7422XJQ-02 can support a high-port-count surveillance or video aggregation platform by connecting multiple cameras and recording systems through integrated Gigabit copper interfaces. The Layer 2 fabric forwards frames among attached endpoints while uplink bandwidth can connect the aggregation node to storage or a core network. The device offers 12 integrated PHYs in one package, helping simplify a dense connector layout. Validation should include clock jitter, thermal behavior, Ethernet compliance, and signal-integrity testing on every layer transition.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour VSC7422XJQ-02 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Notes de conception
Use the official 302-TQFP land pattern and pin table rather than a generic 302-pin CAD symbol. Assign every power, ground, clock, management, and high-speed signal before routing begins. Confirm the exposed or thermal requirements associated with the exact package drawing, and use a multilayer stack-up capable of maintaining controlled differential impedance for the switch's high-speed links.
Follow the manufacturer reference layout for clock inputs and high-speed differential pairs. Keep clock traces short, provide continuous return paths, avoid stubs and unnecessary test-point structures, and observe the documented spacing and length-matching guidance. Validate the final board with the intended Ethernet PHY, magnetics, connectors, and switching traffic because package placement alone cannot guarantee interoperable signal integrity.
Plan separate power-distribution treatment for the switch core and I/O domains using the values and sequencing requirements in the official datasheet. Place decoupling capacitors at the associated package pins with short, low-inductance paths, and provide adequate plane or pour area for the device's switching load. Confirm ripple, transient response, and startup behavior across every intended power configuration before production release.
Informations de conformité
The verified sources identify the device as a networking IC and provide no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declaration. AEC-Q100 is marked not applicable because this Ethernet switch is not an automotive component.