XC3S400-4FGG456I - 400K Spartan-3 FPGA | AMD
Référence : XC3S400-4FGG456I ✗ Fin de vieXC3S400-4FGG456I Présentation
An FPGA is a semiconductor device whose digital logic is configured after manufacture. The FPGA category belongs to the broader programmable-logic hierarchy, which includes complex programmable logic devices, field-programmable gate arrays, and programmable system chips. Unlike a fixed application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, memory resources, and input/output blocks within one package. This enables engineers to implement parallel architectures and revise hardware behavior through configuration rather than redesigning a custom silicon device.
The Spartan-3 architecture provides 8,064 logic cells and approximately 400,000 system gates in this device. Its 264 I/O positions provide substantial connectivity for buses, sensors, displays, and external memory interfaces. The 630 MHz figure describes the device's stated clock capability rather than the performance of every implemented circuit. Actual design performance depends on clocking, routing congestion, logic depth, I/O standards, memory usage, and the selected tool version.
The XC3S400-4FGG456I is identified with an industrial temperature designation, while the G suffix denotes a lead-free-related package option within Xilinx's ordering convention. Its 456-pin FBGA package supports high I/O density but requires careful escape routing, plane distribution, and thermal design. The 1.2 V core supply also requires a regulated power rail designed for the device's dynamic current demand.
Typical uses include industrial controller boards, embedded instrumentation, motor and power-system control, test-and-measurement front ends, communications adapters, and general-purpose embedded prototyping. Its large I/O count is particularly useful when the design must connect parallel sensors, converters, memory devices, or legacy peripheral buses. A 630 MHz device clock provides substantial headroom for pipelined digital algorithms.
Design the PCB around the manufacturer's power, decoupling, clock, and differential-pair guidance. Place bypass capacitors close to supply pins, provide a stable ground reference, and maintain the package's thermal-via and solder-mask requirements. Use conservative I/O standards unless the selected bank configuration and signal-integrity analysis confirm otherwise.
This page combines the device's key FPGA specifications, lifecycle context, package-compatible alternatives, and practical implementation guidance. The alternative list focuses on devices that can preserve the 456-pin board footprint, while the design notes clarify the electrical and mechanical constraints that must still be reviewed before replacement.
Alternatives de remplacement direct pour XC3S400-4FGG456I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC3S400-4FGG456I (même facteur de forme et même empreinte) — différant par Device Type, Logic Cells, Package, Package Type, System Gates.
XC3S400-4FGG456C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC3S400-4FG456I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC3S400-4FG456C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC3S400A-4FGG456C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC3S400A-4FGG456I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC3S400A-4FG456I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC3S400-4FGG456I Valeurs maximales et caractéristiques électriques
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 400,000 gates |
| Logic Cells | 8,064 cells |
| Maximum Stated Clock Frequency | 630 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Input/Output Count | 264 I/O |
| Boîtier | 456-pin FBGA |
| Package Designation | 456-BBGA |
| Type de montage | Surface mount |
| Temperature Grade | Industrial |
Guide de configuration des broches du XC3S400-4FGG456I 456-bbga
Configuration des broches du XC3S400-4FGG456I (boîtier 456-bbga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC3S400-4FGG456I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC3S400-4FGG456I convient pour 6 applications: Industrial Control and Automation, Data Acquisition and Instrumentation, Motor and Power-System Control, Communications and Protocol Bridges, Test and Measurement Systems, Embedded Sensor and Edge Processing.
Industrial Control and Automation
The XC3S400-4FGG456I fits industrial controllers that combine multiple machine interfaces with parallel control logic. Its 8,064 logic cells and 264 I/O positions allow designers to connect sensors, encoders, solenoid drivers, digital I/O modules, and communications peripherals without relying on many external components. A 630 MHz device clock supports pipelined motion, sequencing, and diagnostic functions, although the implemented circuit determines the actual timing margin. The 456-pin FBGA provides the necessary I/O density, while its 1.2 V core rail requires a compact, low-impedance power-distribution network and local high-frequency decoupling.
Recommandé
Data Acquisition and Instrumentation
The AMD XC3S400-4FGG456I is suitable for parallel data-acquisition front ends where multiple converter outputs must be sampled, filtered, and transferred. Its 264 I/O positions provide ample connectivity for parallel ADC and DAC interfaces, trigger signals, clock distribution, and status controls, while 8,064 logic cells can implement digital filtering, calibration, and protocol conversion. The stated 630 MHz clock capability permits deeply pipelined sampling paths. Engineers should use the manufacturer pinout for bank assignments and confirm that the selected I/O standard, voltage, timing, and impedance constraints match each converter interface.
Recommandé
Motor and Power-System Control
The XC3S400-4FGG456I can implement deterministic parallel control for inverters, motor drives, battery systems, and power-conversion equipment. Its logic resources support PWM generation, fault interlocks, current and voltage sampling, state machines, and communication handling, while 264 I/O positions simplify connections among gate drivers, sensors, protection circuits, and supervisory controllers. The 630 MHz clock capability allows high-frequency sampling and computational loops when the architecture is pipelined appropriately. Keep high-current switching paths separate from sensitive FPGA signals, and use careful ground partitioning and decoupling to prevent switching transients from corrupting control logic.
Recommandé
Communications and Protocol Bridges
The Spartan-3 XC3S400-4FGG456I is suitable for legacy protocol converters, serial framing engines, and communications adapters requiring programmable parallel logic. Its 8,064 cells can handle state machines, buffers, checksums, timing, and channel multiplexing, while 264 I/O positions allow simultaneous access to multiple buses and data sources. The stated 630 MHz device clock supports parallel transmit and receive paths, but external transceiver interfaces still determine achievable line rates. Validate voltage-tolerance, pull-up, clocking, and I/O-standard requirements for every connected transceiver, and keep high-speed routing over controlled impedances.
Recommandé
Test and Measurement Systems
The XC3S400-4FGG456I can implement timing generation, pattern control, trigger logic, and parallel measurement processing in compact test-and-measurement equipment. Its 264 I/O positions support DUT connections, synchronization channels, counters, and capture logic, while the 630 MHz stated clock capability is useful for high-rate pattern generation and sampling pipelines. The 456-pin FBGA makes the device suitable for dense instrument electronics but requires escape routing from a very small package. Preserve signal integrity with short paths, solid return planes, controlled impedance where required, and separate analog, clock, and digital power distribution.
Recommandé
Embedded Sensor and Edge Processing
The XC3S400-4FGG456I fits sensor gateways and edge-processing modules that must combine acquisition, filtering, feature extraction, and local control. Its 8,064 logic cells provide parallel capacity for digital filters and event handling, while 264 I/O positions allow simultaneous connection of sensor interfaces, memory devices, status indicators, and network or serial transceivers. The 630 MHz clock rating supports pipelined preprocessing, although system latency depends on the selected architecture and I/O path. Design the board with local bypass capacitance, defined clock distribution, and ample ground connectivity so high-density sensor processing remains deterministic and electrically quiet.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC3S400-4FGG456I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC3S400-4FGG456C | XC3S400-4FG456I | XC3S400A-4FGG456C | XC3S400A-4FGG456I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 456-pin FBGA | 456-pin FBGA | 456-pin FBGA | 456-pin FBGA | 456-pin FBGA |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3A | Spartan-3A |
| Temperature Grade | Industrial | Commercial | Industrial | Commercial | Industrial |
Principaux différenciateurs
- Retains the original industrial-temperature Spartan-3 identity (vs XC3S400-4FGG456C)
- Matches the original device's core FPGA resource ratings (vs XC3S400-4FG456I)
- Provides a package-compatible path away from an end-of-life device (vs XC3S400A-4FGG456C)
- Combines 264 I/O with 8,064 logic cells in a 456-pin FBGA (vs XC3S400A-4FGG456I)
Notes de conception
Design the 1.2 V core rail for the FPGA's dynamic current rather than a nominal static load alone. Place bulk capacitance near the supply entry and high-frequency bypass capacitance directly at the applicable power balls, following the decoupling values and placement rules in DS099-1. Keep the regulator output impedance low at switching frequencies and provide a clean return path through multiple ground connections. Verify power-up, settling, and maximum supply-current conditions before finalizing the power architecture.
The 456-pin FBGA requires a dense escape-routing strategy and exact land-pattern compliance. Use the manufacturer's package drawing for ball locations, solder-mask definition, and footprint tolerances, and preserve all required thermal vias beneath the device. Separate routing for sensitive clocks and differential pairs from noisy switching nodes. Do not infer the footprint from a generic 456-pin drawing because ball numbering and pad geometry determine whether the board can accept the device.
Estimate junction temperature from actual configured activity, core current, ambient temperature, and the board's effective thermal resistance rather than using the device clock rating as a power indicator. Check the 630 MHz operating point with realistic switching activity because clock and I/O loading can materially change dissipation. Provide continuous copper and thermal-via paths into the PCB, and use the manufacturer power-dissipation guidance to establish the maximum acceptable ambient temperature for the enclosure.
A matching 456-pin package does not by itself guarantee a drop-in replacement. Confirm that the commercial or industrial suffix meets the ambient-temperature requirement, that configuration pins and startup behavior remain acceptable, and that Spartan-3 versus Spartan-3A differences do not alter memory, I/O, clock, or auxiliary functions. For XC3S400A candidates, recompile the design, compare pin constraints, verify timing, and perform board-level validation before approving the migration.
Informations de conformité
The G suffix and an industrial-temperature ordering designation are visible in the part-number information, but no definitive RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for this exact MPN. AEC-Q100 qualification is not applicable to this general-purpose FPGA.