XC5VLX50T-1FF665I - 46,080-Cell Virtex-5 FPGA | AMD
Référence : XC5VLX50T-1FF665I ✓ ActifXC5VLX50T-1FF665I Présentation
A field-programmable gate array is a semiconductor whose digital logic, interfaces, and signal processing can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides parallel hardware implementation of control, data acquisition, communications, and embedded-processing functions. The Virtex-5 LXT family uses second-generation ASMBL column-based architecture and combines programmable logic with dedicated hardware resources for demanding embedded designs.
The XC5VLX50T combines 46,080 logic cells with 360 I/O sites in a package designed for high-pin-count, board-level systems. Its 65 nm CMOS construction places it in the Virtex-5 generation, while its 1 V nominal operating supply supports power-conscious designs. The -1 performance grade provides a defined timing class for systems operating at compatible clock and I/O specifications.
The part is categorized as a Virtex-5 LXT FPGA, with logic resources and I/O organized for parallel datapath implementation. The 665-ball FCBGA package supports dense PCB routing but requires careful escape-routing, via placement, and power-grid design. Exact programmable I/O counts by bank, supported I/O standards, internal memory resources, and maximum clock specifications should be confirmed in the Virtex-5 family documentation before final board design.
Typical uses include industrial control, communications infrastructure, instrumentation, video and image processing, test equipment, and embedded systems that benefit from parallel hardware acceleration. The FPGA can implement multiple logic functions concurrently, reducing reliance on sequential processor execution for fixed or streaming operations. Its high I/O count is particularly useful when a design must connect external memory, high-speed transceivers, clocks, and control peripherals.
Design planning should focus on package escape routing, multilayer PCB construction, split power planes, and high-speed signal integrity. The AMD/Xilinx package pinout files should be used to assign every ball correctly before schematic capture. Because BGA routing mistakes are difficult to diagnose, stack-up, impedance, via-in-pad policy, thermal relief, and assembly requirements should be reviewed with the board manufacturer early in development.
This page combines the exact ordering information for the XC5VLX50T-1FF665I with practical selection, pinout, package, and comparison guidance. It also identifies same-footprint family alternatives so engineers can distinguish commercial, industrial, and packaging-related options without assuming that a different suffix is automatically a functional replacement.
Alternatives de remplacement direct pour XC5VLX50T-1FF665I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
XC5VLX50T-1FFG665I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC5VLX50T-1FFV665I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC5VLX50T-1FFG665C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC5VLX50T-1FFV665C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC5VLX50T-1FF665C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX50T-1FF665I Valeurs maximales et caractéristiques électriques
| Device Type | Virtex-5 LXT Field Programmable Gate Array |
| Logic Cells | 46,080 cells |
| I/O Count | 360 I/O |
| Architecture | Second-generation ASMBL column-based architecture |
| Process Technology | 65 nm CMOS |
| Nominal Supply Voltage | 1 V |
| Speed Grade | -1 |
| Boîtier | 665-BBGA, FCBGA |
| Package Pin Count | 665 balls |
| Type de montage | Surface Mount |
Guide de configuration des broches du XC5VLX50T-1FF665I 665 balls
Configuration des broches du XC5VLX50T-1FF665I (boîtier 665 balls). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC5VLX50T-1FF665I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC5VLX50T-1FF665I convient pour 6 applications: Industrial Control and Automation, Communications and Network Interface, Test and Measurement Instrumentation, Video and Image Processing, Embedded Data Acquisition, Aerospace and Defense Control.
Industrial Control and Automation
The XC5VLX50T-1FF665I fits industrial control systems that require deterministic parallel logic and extensive external connectivity. Its 46,080 logic cells can implement motion sequencing, interlocks, state machines, and machine-safety monitoring concurrently, while 360 I/O provide connections to sensors, actuators, encoders, and field-bus transceivers. The -1 speed grade supports a defined performance class, and the I suffix identifies the industrial-temperature ordering option. Design the control path around synchronized clock domains, use the manufacturer I/O-standard limits to select interface types, and isolate noisy industrial inputs at the board level. Power sequencing, ground-plane continuity, and isolated isolation barriers also require board-level planning around the 1 V FPGA supply.
Recommandé
Communications and Network Interface
The XC5VLX50T-1FF665I is suitable for communications equipment requiring high parallelism, dedicated I/O capacity, and reconfigurable protocol handling. The 46,080 logic cells can support packet framing, state machines, buffering control, and hardware-assisted protocol functions, while 360 I/O offer connections to transceivers, memories, and control channels. Parallel data paths can be divided into independently clocked regions, provided source-synchronous timing and package delays are constrained correctly. The -1 speed grade provides a defined timing class, but actual interface rates remain dependent on the selected I/O standard, board routing, and external components. Designers should use the released AMD pinout and timing documentation for every 665-ball connection.
Recommandé
Test and Measurement Instrumentation
The XC5VLX50T-1FF665I can serve as the programmable control core in high-performance test and measurement equipment where acquisition, timing, and pattern generation must operate in parallel. Its 46,080 logic cells support counters, timing generators, trigger logic, and digital pattern engines, while 360 I/O allow dense connections to converters, memory, and front-end circuitry. The 65 nm CMOS implementation and 1 V nominal supply make it suitable for compact multi-board instruments, although careful decoupling and thermal design remain essential. Use synchronous interfaces when possible to reduce timing uncertainty, constrain acquisition paths, and maintain consistent clock distribution across the 665-ball device.
Recommandé
Video and Image Processing
The XC5VLX50T-1FF665I is applicable to video and image-processing systems that benefit from parallel pipeline execution. The 46,080 logic cells can implement pixel pipelines, color conversion, thresholding, and frame-control functions, while 360 I/O support connections to image sensors, memory devices, and display or interface controllers. A hardware pipeline avoids the serial overhead of performing routine operations in a general-purpose processor, although system timing depends on the selected I/O standards and external memory interface configuration. The -1 speed grade helps define device timing, while the industrial suffix supports designs requiring the corresponding temperature grade. Layout should separate sensitive clock and data paths and provide continuous supply distribution across the large BGA footprint.
Recommandé
Embedded Data Acquisition
The XC5VLX50T-1FF665I suits embedded acquisition systems that must collect and process multiple channels concurrently. Its 46,080 logic cells can combine parallel ADC interfaces, digital filtering, data formatting, buffering control, and communication framing in one configurable device, while 360 I/O reduce the need for multiple external routing components. The 1 V nominal supply supports compact power-conscious implementations, but dynamic current and thermal behavior must be evaluated from the family documentation for the selected configuration. Engineers should budget timing closure for input capture, use registered interfaces where appropriate, and validate the 665-ball footprint against the released AMD assembly data before committing the PCB.
Recommandé
Aerospace and Defense Control
The XC5VLX50T-1FF665I can be evaluated for aerospace and defense control functions that require extensive programmable logic, deterministic behavior, and high I/O density. The 46,080 logic cells support redundant control channels, telemetry formatting, command decoding, and fault-management logic, while 360 I/O permit direct integration with sensors, transceivers, and monitoring circuits. The I suffix identifies an industrial-grade ordering option, but aerospace deployment may require program-specific qualification, traceability, screening, or radiation analysis beyond the standard device ordering information. Confirm the exact temperature range, life-cycle status, quality plan, and configuration requirements before design freeze. Synchronous clocking, controlled state transitions, and comprehensive hardware verification are particularly important.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC5VLX50T-1FF665I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC5VLX50T-1FFG665I | XC5VLX50T-1FFV665I | XC5VLX50T-1FFG665C | XC5VLX50T-1FFV665C | XC5VLX50T-1FF665C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT |
| Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| I/O Count | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Nominal Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Package | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA |
| Speed Grade | -1 | -1 | -1 | -1 | -1 | -1 |
| Temperature Grade | Industrial | Industrial | Industrial | Commercial | Commercial | Commercial |
Principaux différenciateurs
- Maintains the industrial-grade ordering option within the same 665-ball device family (vs XC5VLX50T-1FFG665C)
- Provides full Virtex-5 LXT logic and I/O density in the target package configuration (vs XC5VLX50T-1FFV665I)
- Uses the established 65 nm CMOS Virtex-5 LXT resource structure (vs XC5VLX50T-1FF665C)
Notes de conception
Use the released AMD 665-ball FCBGA package drawing and pinout file as the authority for land patterns, ball assignments, and assembly clearances. Do not substitute a generic BGA footprint because pad diameter, solder-mask opening, paste geometry, and thermal-via requirements can differ. Review the PCB stack-up and escape-routing strategy with the assembler, and establish a keepout for configuration pins and any package-specific assembly features before schematic-to-layout release.
Plan the 1 V core rail and all package-specific supply inputs as a low-impedance distribution network. Use the manufacturer power-decoupling and power-sequence recommendations from the Virtex-5 documentation for capacitor selection and placement. Place high-frequency bypass capacitors at the appropriate package power balls, preserve uninterrupted return paths, and verify voltage sequencing during configuration. Estimated: no power-dissipation value is calculated here because the design-specific core voltage, current, utilization, and temperature are required.
Treat clock and high-speed I/O nets as constrained transmission paths rather than general routing. Develop source-synchronous interfaces with matched-length or package-delay compensation, keep clock references short, and avoid plane splits beneath sensitive routes. Account for the 665-ball package escape delay and the difference between external trace length and on-package routing. Validate interface-level constraints with the released AMD timing and I/O guidance for the selected speed grade.
A 665-ball FCBGA can require deliberate thermal design even when the nominal logic-cell count appears moderate. Check the actual utilization, switching activity, I/O load, core voltage, and ambient conditions for the finished design, then apply the manufacturer's power and junction-temperature guidance. Use a multilayer PCB with uninterrupted ground planes and an appropriate thermal-via pattern. Estimated: junction temperature and dissipation require design-specific input values and therefore are not stated as fixed component specifications.
Informations de conformité
The device is an industrial-temperature FPGA rather than an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current AMD product declaration or quality documentation.