XC6SLX150T-3FG676I - 147K Cell Spartan-6 FPGA | AMD
Référence : XC6SLX150T-3FG676I ✓ ActifXC6SLX150T-3FG676I Présentation
An FPGA is a reconfigurable digital semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic, interfaces, and signal-processing pipelines to be programmed after manufacture. Within the product hierarchy, the XC6SLX150T-3FG676I is a Spartan-6 LXT FPGA, placing it between a general-purpose FPGA and a high-speed programmable logic device. Its 147,443 logic cells provide substantial parallel processing capacity for embedded control, communications, video, and industrial systems.
The -3 suffix identifies the highest Spartan-6 performance grade offered for this family, while the industrial-temperature marking supports operation from -40°C to +100°C junction temperature. The device operates from a 1.14 V to 1.26 V core supply and includes 396 available I/O sites in a 676-FCBGA package with 1 mm pitch. These characteristics suit compact, high-density industrial, telecommunications, instrumentation, and control platforms.
The LXT family architecture combines configurable logic blocks with dedicated block RAM and DSP resources. This allows designers to implement parallel pipelines, data acquisition functions, protocol interfaces, and control logic in one device. The 676-ball package also provides more board-level interconnect capacity than smaller Spartan-6 packages, which is valuable for systems requiring wide parallel buses or numerous high-speed serial links.
Typical applications include industrial automation, telecom and network-interface equipment, test and measurement systems, high-resolution video processing, motor control, and embedded signal processing. A design can use the FPGA for parallel acquisition and filtering while its serial transceivers handle high-speed links. Industrial suitability must still be determined from the complete device specifications and system thermal conditions.
PCB implementation requires careful power-plane integrity, decoupling, BGA fanout, and thermal management. Assign the bank supply voltages required by each I/O standard, keep the high-speed serial lanes impedance-controlled, and verify every ball assignment with the Spartan-6 package pinout file. A dense BGA design also benefits from uninterrupted thermal-via arrays beneath the device and careful examination of solder-mask and pad-stack tolerances.
This page combines package, electrical, lifecycle, application, and replacement information with practical design guidance for engineers evaluating the XC6SLX150T-3FG676I in a new programmable-logic platform.
Alternatives de remplacement direct pour XC6SLX150T-3FG676I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC6SLX150T-3FG676I (même facteur de forme et même empreinte) — différant par Device Type, Package, Lead-Free Status, Speed Grade, Temperature Grade.
XC6SLX150T-3FGG676I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX150T-N3FG676I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX150T-4FG676C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX150T-L1FG676I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX150T-1FG676I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC6SLX150T-3FG676I Valeurs maximales et caractéristiques électriques
| Device Type | Spartan-6 LXT field-programmable gate array (FPGA) |
| Logic Cells | 147,443 cells |
| I/O Sites | 396 I/O |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V nominal |
| Core Supply Voltage Range | 1.14 V to 1.26 V |
| Plage de température de fonctionnement | -40°C to +100°C junction temperature |
| Boîtier | 676-pin FCBGA, 27 x 27 mm |
| Package Pitch | 1.0 mm |
| Type de montage | Surface-mount BGA |
| Speed Grade | -3 performance grade |
| Temperature Grade | Industrial grade |
| Programmable Logic | 147,443 logic cells |
| Lead-Free Status | Lead-free package |
Guide de configuration des broches du XC6SLX150T-3FG676I 1.0 mm
Configuration des broches du XC6SLX150T-3FG676I (boîtier 1.0 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC6SLX150T-3FG676I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC6SLX150T-3FG676I convient pour 6 applications: Industrial Automation and Control, Telecommunications Line-Card Equipment, High-Speed Data Acquisition, Video and Image Processing, Test and Measurement Equipment, Embedded Signal Processing.
Industrial Automation and Control
The XC6SLX150T-3FG676I fits industrial controllers that combine multiple machine-control tasks with extensive sensor and actuator connectivity. Its 147,443 logic cells can implement sequencing, motion-control logic, interlocks, and communication protocols, while 396 I/O sites provide a broad interface to encoders, counters, digital I/O, and industrial buses. The -40°C to +100°C junction-temperature grade supports industrial enclosure environments when the complete system thermal design remains within device limits. Use the AMD pinout file to assign I/O standards by bank, and provide local decoupling and solid power and ground planes to preserve signal integrity across the dense 676-FBGA footprint.
Recommandé
Telecommunications Line-Card Equipment
The XC6SLX150T-3FG676I is suitable for telecom and network-interface equipment requiring parallel processing, programmable serial connectivity, and flexible I/O. The 147,443 logic cells can support packet handling, channel processing, framing, and protocol adaptation, while the LXT family's programmable high-speed transceivers can reduce external component count on suitable interfaces. The 396 I/O sites allow connection to backplanes, memory, status signals, and external converters. Engineering review should verify the exact transceiver count, supported protocols, and bank voltage requirements in the complete AMD family documentation, then constrain high-speed routes with controlled-impedance layout.
Recommandé
High-Speed Data Acquisition
The XC6SLX150T-3FG676I can implement parallel ADC and DAC acquisition, digital filtering, calibration, and real-time data reduction in one programmable device. Its 147,443 logic cells provide substantial capacity for multiple acquisition channels and fixed-function signal-processing pipelines, while the 396 I/O sites simplify connections to converters, clocks, trigger logic, and test equipment. Block RAM and DSP resources should be assigned according to the target sample rate and channel count from the complete device tables. Clocking, input timing, and output timing are especially important in acquisition systems, so the design should use dedicated clock-capable pins and validate setup and hold requirements after placement and routing.
Recommandé
Video and Image Processing
The XC6SLX150T-3FG676I supports parallel pixel pipelines, color processing, scaling, filtering, and interface bridging where deterministic logic and abundant I/O are more important than a hardwired function. The 147,443-cell device can implement multiple parallel lanes, while 396 I/O sites can connect sensors, memory, and display-interface components without an external FPGA when system density permits. Video designs must carefully budget block RAM, DSP resources, and external memory bandwidth. Place high-speed interfaces in appropriate banks, keep routing away from sensitive inputs, and use the official package files to verify every high-speed and power ball before fabrication.
Recommandé
Test and Measurement Equipment
The XC6SLX150T-3FG676I is well suited to modular test and measurement systems requiring configurable acquisition, pattern generation, timing control, and instrumentation processing. A single FPGA can combine parallel data capture, correction tables, sequencing, and communication logic, using its 147,443 programmable cells and 396 I/O sites to create a compact instrument architecture. The industrial temperature grade is useful when the instrument operates in temperature-chamber or factory environments, although enclosure temperatures must remain within the device limits. Use clock-capable inputs, isolate analog sections, and apply controlled-impedance routing to avoid coupling measurement-clock noise into sensitive front ends.
Recommandé
Embedded Signal Processing
The XC6SLX150T-3FG676I can implement FIR and IIR filters, correlation, modulation, demodulation, and fixed-point algorithms as parallel programmable pipelines. Its 147,443 logic cells support substantial parallelism, and the LXT family includes programmable logic, block RAM, and DSP resources for signal-processing designs. Designers should map arithmetic operations to DSP slices where appropriate, pipeline stages to meet clock targets, and use the AMD device tables to confirm resource availability. Because BGA power delivery and clock distribution strongly affect realization, the PCB should provide continuous planes, carefully placed decoupling, and a low-skew clock network before fine timing closure is attempted.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC6SLX150T-3FG676I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC6SLX150T-3FGG676I | XC6SLX150T-N3FG676I | XC6SLX150T-4FG676C | XC6SLX150T-L1FG676I | XC6SLX150T-1FG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FBGA, 27 x 27 mm, 1.0 mm pitch | 676-FBGA | 676-FBGA | 676-FBGA | 676-FBGA | 676-FBGA |
| Speed Grade | -3 | -3 | -3N | -4 | -1L | -1 |
Principaux différenciateurs
- Matches the closest same-speed same-package listing across the published core resource values (vs XC6SLX150T-3FGG676I)
- Retains the industrial temperature range while the -4 option changes qualification conditions (vs XC6SLX150T-4FG676C)
- Uses the highest listed -3 performance class rather than a lower family speed designation (vs XC6SLX150T-L1FG676I)
Notes de conception
Use the official AMD Spartan-6 package pinout file to assign all 676 balls. Create a clean fanout for the dense 1.0 mm-pitch FCBGA, maintain the required pad and solder-mask geometry, and verify layer-transition via structures with the fabricator. Treat power and ground as dedicated plane structures rather than routing them through general-purpose signal layers.
Design the core and I/O supplies as separate power domains and confirm every bank voltage before assigning pins. Decoupling locations and component values must follow the AMD power-supply recommendations because incorrect bank voltage can permanently damage an I/O. Separate noisy and quiet supply paths where practical, provide continuous reference planes, and verify startup sequencing across every powered bank.
Place clock-capable inputs at their assigned balls and keep clock routes short, symmetric, and isolated from high-current outputs. Route high-speed serial interfaces as controlled-impedance differential pairs with matched length and via structures. Recheck the ball assignments after placement because moving a constrained pin can invalidate both the package footprint and timing constraints.
The 676-FBGA package needs a deliberate thermal path even when logic utilization is moderate. Provide an uninterrupted copper area under the device where the package and PCB rules permit, add thermal-via arrays, and model the assembly with the actual PCB stack-up. Validate the enclosure temperature so that the calculated junction temperature remains below the device's +100°C industrial limit.
Do not assume that a similarly named Spartan-6 ordering code is interchangeable solely because the package pin count matches. Compare speed grade, temperature grade, voltage, I/O standards, configuration behavior, and the complete package pinout. The -3, -3N, -4, -1L, and -1 designations can affect timing closure and qualification even when the FPGA family and package are unchanged.
Informations de conformité
The package is identified as lead-free, but explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not established for this exact ordering code.