XC9536XL-10CS48C - 36-Macrocell 3.3V CPLD | AMD
Référence : XC9536XL-10CS48C ✓ ActifXC9536XL-10CS48C Présentation
A CPLD, or complex programmable logic device, is a configurable digital semiconductor used to implement combinational and sequential logic. In the product hierarchy, a CPLD belongs to programmable logic devices alongside FPGAs. Unlike a fixed-function logic IC, a CPLD can be programmed, erased, and reprogrammed to support product revisions or board-level customization. The XC9536XL architecture combines multiple function blocks and programmable interconnect resources in a compact device suited to moderate logic-density designs.
Key features include 36 macrocells, 36 I/O pins, in-system programmability, a 3.3 V operating supply, and a 48-ball CSBGA package. The DigChip specification associated with the XC9536XL-10CS48C identifies a minimum of 10,000 program-and-erase cycles, allowing repeatable field updates. The package also supports dense PCB placement where individual leaded packages would occupy excessive board area.
The programmable architecture separates the design into function blocks connected through a programmable interconnect. This structure gives designers reusable logic resources without requiring an FPGA or a discrete gate array. The AMD datasheet identifies the XC9536XL as a high-performance CPLD family with fast propagation delays, making deterministic control and interface functions practical at 10 ns in the selected speed grade.
Typical uses include industrial control, communications equipment, instrumentation, test and measurement systems, peripheral interfacing, and board-level glue logic. In these systems, the CPLD can consolidate address decoding, latches, state-machine control, bus arbitration, and interface adaptation into one configurable logic device while reducing the number of discrete components.
PCB design must account for the dense 48-ball grid, power and ground distribution, and the requirements of the in-system programming interface. Follow the AMD DS058 package, pinout, decoupling, and programming guidance rather than treating this BGA device as a generic programmable logic footprint. Confirm that the assembled board can support programming access and that all unused I/O pins have valid electrical states.
This product page combines the verified device identity, package information, programming characteristics, pin-compatible family alternatives, and practical implementation guidance. It also distinguishes the confirmed XC9536XL options from unverified cross-manufacturer replacements, helping engineers evaluate board reuse without assuming that a similar CPLD is electrically or mechanically interchangeable.
Alternatives de remplacement direct pour XC9536XL-10CS48C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC9536XL-10CS48C (même facteur de forme et même empreinte) — différant par Device Type, Package, RoHS Status, Temperature Grade, Architecture.
XC9536XL-10CSG48C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC9536XL-10CS48I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC9536XL-10CS48C Valeurs maximales et caractéristiques électriques
| Device Type | Complex Programmable Logic Device (CPLD) |
| Programmable Type | In-System Programmable |
| Architecture | XC9536XL High Performance CPLD |
| Tension d'alimentation | 3.3 V |
| Number of Macrocells | 36 macrocells |
| Number of User I/O | 36 I/O |
| Usable Gates | 800 gates |
| Speed Grade | -10, 10 ns class |
| Minimum Program and Erase Cycles | 10,000 cycles |
| Boîtier | 48-ball CSBGA |
| Package Code | CS48 |
| Package Shape | Square |
| Terminal Form | Ball |
| Number of Terminals | 48 terminals |
| Temperature Grade | Commercial |
| Type de montage | Surface Mount |
| Statut RoHS | RoHS Non-Compliant |
| Lead-Free Status | Contains Lead |
| Programmable Logic Type | Flash Programmable Logic Device |
Guide de configuration des broches du XC9536XL-10CS48C square
Configuration des broches du XC9536XL-10CS48C (boîtier square). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC9536XL-10CS48C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC9536XL-10CS48C convient pour 6 applications: Industrial Control Logic, Peripheral Interface Consolidation, Instrumentation Signal Routing, Communications Interface Control, Test and Measurement Control, Embedded System Glue Logic.
Industrial Control Logic
The AMD XC9536XL-10CS48C can consolidate control sequencing, interlocks, state-machine logic, and discrete I/O handling in a 3.3 V industrial system. Its 36 macrocells and 36 user I/O pins provide enough resources for moderate-density functions without requiring a larger FPGA, while the 48-ball CSBGA keeps routing compact on a multilayer board. The -10 speed class supports deterministic logic where propagation timing and external loading must be included in system-level timing analysis. Engineers should select the commercial suffix only when environmental conditions remain inside its specified range; otherwise, the XC9536XL-10CS48I family option is the appropriate industrial-temperature choice. Power distribution, bypass placement, and programming access should be planned according to the AMD DS058 implementation guidance.
Recommandé
Peripheral Interface Consolidation
The XC9536XL-10CS48C is useful for adapting legacy peripherals and combining bus steering, address decode, chip-select generation, latches, and level conversion control in one programmable logic device. Its 36 I/O pins can support multiple interface signals, while 36 macrocells provide substantially more logic density than a collection of simple gate packages. A 3.3 V supply aligns the device with contemporary mixed-signal and embedded systems, although external level-shifting may still be required for legacy signal standards. In-system programming allows interface revisions to be implemented without relocating the component. Engineers should use the AMD pinout and timing tables to assign fixed pins, and should verify external pull states, drive strength, and signal loading rather than assuming every peripheral interface can be implemented directly.
Recommandé
Instrumentation Signal Routing
The AMD XC9536XL-10CS48C can coordinate multiplexing, trigger routing, measurement sequencing, and control signals in instrumentation equipment. With 36 macrocells, the CPLD consolidates logic that might otherwise occupy several counters, latches, and gate packages, while its 36 I/O pins simplify connection to front-panel controls, converters, and status indicators. The 10 ns speed designation provides a defined timing class for short control paths, though cable delay, connector capacitance, and analog settling still require separate analysis. The dense 48-ball package requires careful BGA layout and thermal distribution to avoid assembly defects. Use the manufacturer’s recommended land pattern, verify the BGA assembly process, and keep sensitive analog and reference routing away from fast digital outputs to minimize coupling.
Recommandé
Communications Interface Control
The XC9536XL-10CS48C is suitable for protocol-aware front ends that need framing, command parsing, FIFO control, status reporting, and programmable routing between communication devices. Its 36 macrocells support moderate amounts of state-machine and combinational logic, while 36 I/O pins provide connectivity for clock, data, handshake, and fault signals. The in-system-programmable architecture is particularly useful when firmware revisions require changes to communication control logic without a board respin. Designers should establish clocking and timing constraints in the implementation environment and ensure that external transceiver interfaces have appropriate drive strength, termination, and isolation. Because the device is a 3.3 V part, voltage compatibility must be confirmed for every attached transceiver, connector, and processor interface.
Recommandé
Test and Measurement Control
In automated test equipment, the AMD XC9536XL-10CS48C can implement sequencer logic, pattern control, instrument arbitration, limit handling, and pass/fail signal generation. The device’s 36 macrocells allow a compact implementation of coordinated control functions, and its 36 user I/O pins can connect test points, relays, fixtures, and measurement instruments. The 48-ball CSBGA improves density over leaded PLD packages, supporting smaller front panels and higher connector density. Timing closure should include instrument acquisition delay, relay control requirements, and board propagation rather than relying on the 10 ns device speed class alone. Designers should reserve the in-system programming path for production programming and field updates, follow the AMD decoupling recommendations, and validate the finished assembly with appropriate BGA inspection methods.
Recommandé
Embedded System Glue Logic
The XC9536XL-10CS48C can serve as glue logic between a processor, memory, sensors, and external connectors by handling chip selects, address decoding, bus arbitration, interrupt routing, and reset sequencing. Its 36 macrocells are appropriate for moderate glue-logic density, while in-system programmability simplifies board bring-up and product revisions. The 3.3 V architecture supports integration with many embedded systems, but designers must confirm pin-level voltage limits and avoid using a programmable I/O as a substitute for a dedicated input, output, or bidirectional buffer. A compact BGA layout improves routing density but requires careful escape routing, continuous power planes, and manufacturing control. Confirm programming signals remain accessible after final assembly and use the AMD DS058 pin table when mapping processor, sensor, and connector signals.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC9536XL-10CS48C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC9536XL-10CSG48C | XC9536XL-10CS48I |
|---|---|---|---|
| Brand | AMD | AMD | AMD |
| Package | 48-ball CSBGA (CS48) | 48-ball CSBGA (CS48) | 48-ball CSBGA (CS48) |
| Device Type | CPLD | CPLD | CPLD |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Macrocells | 36 macrocells | 36 macrocells | 36 macrocells |
| User I/O | 36 I/O | 36 I/O | 36 I/O |
| Usable Gates | 800 gates | 800 gates | 800 gates |
| Speed Grade | -10, 10 ns class | -10, 10 ns class | -10, 10 ns class |
| Programming | In-System Programmable | In-System Programmable | In-System Programmable |
Principaux différenciateurs
- Commercial-temperature orderable variant with dense 36-I/O integration (vs XC9536XL-10CS48I)
- Same-family CS48 alternative without changing logic resources (vs XC9536XL-10CSG48C)
- In-system programmability for field updates (vs XC9536XL-10CS48I)
- 800 usable gates in a compact 48-ball package (vs XC9536XL-10CSG48C)
Notes de conception
Use the 48-ball CSBGA land pattern and escape-routing method specified in the AMD DS058 package documentation. A conventional 48-pin DIP-style schematic symbol is not a physical footprint: power, ground, configuration, clock, and I/O balls must be assigned from the official ball table. Keep the programming interface accessible, maintain short return paths for switching currents, and follow the manufacturer’s via and solder-mask guidance so that the BGA can be assembled and inspected reliably.
Provide a stable 3.3 V supply and place the required bypass capacitors close to their associated power balls, following the AMD DS058 decoupling guidance. Separate high-current output returns from quiet logic returns where practical, and avoid placing sensitive analog traces beneath switching nodes. Check the complete design for simultaneous switching current at the package pins, because the 10 ns speed class does not remove the need for adequate power-plane geometry and low-impedance connections.
Do not treat related XC9536XL orderable suffixes as automatically identical. XC9536XL-10CS48C is identified as commercial grade, XC9536XL-10CS48I as industrial grade, and XC9536XL-10CSG48C uses a different ordering suffix. Before substitution, compare the exact package drawing, ball map, terminal finish, temperature limits, programming configuration, and lifecycle requirements. Never convert the device to a generic PLD symbol or 48-pin package without checking the manufacturer’s electrical and mechanical documentation.
Reserve programming and configuration access throughout the product lifecycle. If the CPLD is programmed in production, confirm that the programming fixture can reach the required signals without removing surrounding components. If field updates are required, provide the specified interface and ensure that reset or configuration behavior cannot place outputs into hazardous states. In systems with external relays, power stages, or motor controls, define safe output states before power is applied.
Apply timing constraints to every external path rather than comparing signal propagation only with the nominal 10 ns device class. Include package, board propagation, connector, load, and receiver delay in the analysis. Use controlled-impedance routing for high-speed or externally exposed signals, provide the required termination at the correct endpoint, and keep programming, configuration, and clock lines away from noisy switching nets. Complete worst-case timing analysis across all supported voltage and temperature conditions.
Informations de conformité
The associated DigChip specification identifies XC9536XL-10CS48C as RoHS non-compliant and containing lead. AEC-Q100 status is not applicable to this commercial-temperature CPLD, while REACH, halogen-free, and conflict-minerals status remain unconfirmed.