XCKU040-1FFVA1156C - 530K Logic Cell Kintex UltraScale FPGA | AMD
Référence : XCKU040-1FFVA1156C ✓ ActifXCKU040-1FFVA1156C Présentation
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and I/O behavior are configured after manufacture. The XCKU040 device combines configurable logic blocks, block RAM, digital signal processing resources, programmable I/O, high-speed serial transceivers, and dedicated clocking resources. It therefore sits within the programmable-logic hierarchy as an FPGA and within the broader semiconductor category as a high-density adaptive-computing device.
Principal resources include 530,250 system logic cells, 1,920 DSP slices, 21,606 Kb of block RAM, 520 input/output pins, and 520 I/O sites according to product listings. Its -1 speed grade supports deterministic accelerator, networking, signal-processing, and high-throughput data-processing designs. The FFVA1156 package uses a 35 mm by 35 mm FCBGA land pattern and exposes a very large pin count for high-bandwidth board-level connectivity.
The 20 nm Kintex UltraScale architecture supports parallel processing, fixed-function acceleration, and flexible interface adaptation in one device. Its 1,920 DSP slices are particularly useful for filters, transforms, fixed-point arithmetic, and digital communications functions, while its 21,606 Kb of block RAM provides on-chip storage for buffering and lookup-intensive pipelines. The device also offers 520 I/O, allowing compact systems to connect external memory, network transceivers, clocks, sensors, and high-speed data sources without relying exclusively on serial links.
Typical applications include 5G and fixed-network infrastructure, high-speed video processing, industrial machine vision, defense communications, high-performance computing acceleration, test and measurement, and embedded signal-processing systems. The combination of programmable logic, DSP capacity, and a large I/O count makes the device suitable when fixed-function silicon would be inflexible but a processor-only implementation would lack deterministic throughput.
PCB implementation requires careful power delivery, decoupling, thermal management, and escape-routing planning for the FCBGA package. Follow the AMD UltraScale PCB design guidance, use the package-specific power and ground plane construction, validate high-speed transceiver and clock layouts, and verify assembly constraints with the FFVA1156 footprint files before releasing the board design.
This product overview combines the exact device identity, package and resource data with engineering-focused use cases, replacement considerations, and implementation guidance. It is intended to help designers evaluate resource fit, PCB complexity, thermal demands, and migration choices before committing an FFVA1156 design to manufacturing.
Alternatives de remplacement direct pour XCKU040-1FFVA1156C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XCKU040-1FFVA1156C (même facteur de forme et même empreinte) — différant par Speed Grade, Device Type, Package, Logic Cells, Package Type.
XCKU040-2FFVA1156E
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XCKU040-2FFVA1156I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XCKU040-3FFVA1156E
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XCKU040-1FFVA1156I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XCKU035-1FFVA1156C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XCKU040-1FFVA1156C Valeurs maximales et caractéristiques électriques
| Device Type | Kintex UltraScale FPGA |
| System Logic Cells | 530,250 cells |
| DSP Slices | 1,920 slices |
| Block RAM | 21,606 Kb |
| User I/O | 520 I/O |
| Input Pins | 520 pins |
| Boîtier | FFVA1156 FCBGA, 1156 pins |
| Package Body Size | 35 mm x 35 mm |
| Nominal Core Voltage | 0.95 V |
| Process Technology | 20 nm |
| Speed Grade | -1 |
| Commercial Junction Temperature | 0 °C to 85 °C |
| Type de montage | Surface mount |
| Statut RoHS | Compliant |
Guide de configuration des broches du XCKU040-1FFVA1156C 35 mm x 35 mm
Configuration des broches du XCKU040-1FFVA1156C (boîtier 35 mm x 35 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XCKU040-1FFVA1156C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XCKU040-1FFVA1156C convient pour 6 applications: 5G and Network Infrastructure, Video and Image Processing, Industrial Machine Vision, High-Performance Computing Acceleration, Test and Measurement Systems, Communications and Signal Processing.
5G and Network Infrastructure
The XCKU040-1FFVA1156C fits parallel network functions that combine routing, filtering, packet processing, and fixed-function acceleration. Its 530,250 logic cells provide substantial configurable fabric, while 1,920 DSP slices support filtering and transform operations in parallel. The 520 user I/O allow direct connection to transceivers, network processors, clocks, and control logic without making a separate device mandatory for every interface. In a 5G baseband or fixed-network accelerator, designers can partition traffic across fixed pipelines and programmable control logic to reduce processor bottlenecks. The -1 speed grade is appropriate where the design closes timing within that grade, but final utility depends on required line rates, transceiver allocation, clocking, and external-memory bandwidth.
Recommandé
Video and Image Processing
The XCKU040-1FFVA1156C is appropriate for pixel pipelines, video analytics, optical inspection, and high-throughput image processing because programmable logic and DSP resources can execute stages concurrently. Its 1,920 DSP slices are useful for filtering, correlation, color conversion, and fixed-point transforms, while 21,606 Kb of block RAM supports line buffers, lookup structures, and short local storage. The 520 I/O provide wide parallel interfaces to image sensors, frame grabbers, displays, and external memory. A practical design can place fixed-latency pixel operations in dedicated pipelines and reserve programmable logic for control, metadata, and adaptive functions. The device offers substantial parallelism, but achievable frame rate and channel count depend on sensor interface width, memory bandwidth, clocking, and timing closure in the selected -1 speed grade.
Recommandé
Industrial Machine Vision
The XCKU040-1FFVA1156C supports industrial inspection systems that combine camera acquisition, real-time feature extraction, and programmable decision logic. Programmable logic can implement sensor-format conversion and interface timing, while 1,920 DSP slices accelerate convolution, filtering, and correlation at deterministic throughput. The 530,250 logic cells allow multiple image-processing pipelines to operate concurrently, and 21,606 Kb of block RAM can support tile and line buffering close to the processing fabric. Its 520 user I/O are valuable when connecting cameras, triggers, encoders, storage, and factory-control signals. For production equipment, designers should use deterministic clocks, isolate high-speed data paths, and validate industrial temperature requirements separately because the C suffix identifies the commercial temperature class.
Recommandé
High-Performance Computing Acceleration
The XCKU040-1FFVA1156C can serve as a data-plane accelerator in heterogeneous computing systems where programmable throughput is more valuable than general-purpose software flexibility. Its 530,250 logic cells support parallel control structures and interfaces, 1,920 DSP slices handle multiply-accumulate-heavy kernels, and 21,606 Kb of block RAM enables low-latency local buffering. A designer can map repetitive operations into fixed pipelines, use programmable logic for coordination, and retain host connectivity through high-speed serial or parallel links. Compared with a CPU-only implementation, the FPGA can reduce dependency on software scheduling for deterministic workloads. The practical benefit depends on data-transfer efficiency: the accelerator must keep pipelines supplied with data, avoid unnecessary external-memory traffic, and close timing under realistic clock frequencies before the theoretical parallelism can produce useful application speedup.
Recommandé
Test and Measurement Systems
The XCKU040-1FFVA1156C fits modular test platforms requiring parallel acquisition, protocol execution, pattern generation, and real-time analysis. The 520 user I/O support numerous synchronous channels, while programmable logic can implement counters, timing units, sequence engines, and interface adapters. Its 1,920 DSP slices enable filters, transforms, demodulation, and statistical operations, and 21,606 Kb of block RAM supports waveform and sample buffering. A modular instrument can therefore combine acquisition and analysis without prescribing a fixed processor architecture. For accurate measurements, however, designers must use low-jitter clocks, constrain input timing, isolate sensitive analog sections, and account for package and board behavior. The -1 speed grade may be adequate when the critical path meets its timing limits, but measurement resolution and throughput should be verified with actual routing rather than inferred from DSP count alone.
Recommandé
Communications and Signal Processing
The XCKU040-1FFVA1156C is suitable for communications equipment requiring concurrent modulation, filtering, packet handling, and interface control. Its 530,250 logic cells support protocol state machines and parallel data paths, while 1,920 DSP slices accelerate finite impulse response filtering, correlation, and other multiply-accumulate operations. The 21,606 Kb of block RAM provides dedicated storage for symbol buffers, counters, and lookup tables, and 520 I/O permit broad parallel connectivity. In a communications module, designers can partition fixed datapaths from adaptive control and use independent clock domains for high-rate and management functions. Final performance depends on the transceiver mix, reference-clock architecture, channel utilization, and board-level signal integrity. The FFVA1156 footprint also requires a carefully engineered power grid and escape-routing strategy to maintain dependable performance across all active clock domains.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XCKU040-1FFVA1156C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XCKU040-2FFVA1156E | XCKU040-2FFVA1156I | XCKU040-3FFVA1156E | XCKU040-1FFVA1156I | XCKU035-1FFVA1156C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FFVA1156 FCBGA | FFVA1156 FCBGA - same | FFVA1156 FCBGA - same | FFVA1156 FCBGA - same | FFVA1156 FCBGA - same | FFVA1156 FCBGA - same |
| Device Family | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU035 |
| Speed Grade | -1 | -2 | -2 | -3 | -1 | -1 |
| Temperature Ordering Suffix | C - commercial | E - extended | I - industrial | E - extended | I - industrial | C - commercial |
Principaux différenciateurs
- Higher-density XCKU040 resource tier than XCKU035 (vs XCKU035-1FFVA1156C)
- Commercial-temperature ordering for standard embedded systems (vs XCKU040-1FFVA1156I)
- Lower speed grade offers additional timing margin in the same footprint (vs XCKU040-3FFVA1156E)
Notes de conception
Use the AMD UltraScale power-estimation methodology with the final utilization, clock rates, and enabled resources. The FFVA1156 device contains multiple power rails, so the PCB must provide separately filtered and decoupled supplies for the core, auxiliary, and I/O domains listed in the device documentation. Place high-frequency decoupling close to the package power balls and validate the plane geometry against the AMD PCB-design guide. Re-estimate power after synthesis rather than relying only on nominal device averages.
Plan copper spreading and heat removal for the 35 mm by 35 mm FCBGA before routing escapes. Use the AMD power estimator to calculate activity-dependent dissipation, then verify junction temperature using the package thermal model and the completed board stack-up. Keep high-power routing and memories away from thermally sensitive areas, provide uninterrupted thermal planes where permitted, and use vias or thermal structures recommended by the package documentation. Validate the assembled board across ambient temperature, airflow, and power-utilization conditions.
Generate the PCB footprint and escape routes from the FFVA1156 package files for the XCKU040 device rather than copying a generic 1156-ball symbol. Confirm ball assignments, power and ground balls, reserved pins, and high-speed transceiver pins in UG575 and the device pinout files. Keep simultaneous-switching paths short, provide reference-clock symmetry, and use the recommended length and impedance rules. Run design-rule checks against the actual stack-up before releasing fabrication outputs.
Do not treat a shared FFVA1156 footprint as proof that every migration is functionally transparent. When changing speed grade or device tier, rerun synthesis, placement, timing analysis, power estimation, and DRC because utilization, timing margin, and I/O behavior may change. The XCKU035 alternative also requires proof that the design fits its smaller resource tier. Keep configuration, clocking, power sequencing, and thermal assumptions synchronized with the selected ordering code and its device documentation.
Informations de conformité
The product listing identifies the exact MPN as RoHS compliant. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established. AEC-Q100 is marked not applicable because this is a general-purpose FPGA rather than an automotive-qualified ordering code.