מוצרים (44,000+)

MT4LC4M16R6TG-5 - 4M x 16 EDO DRAM, 50-pin TSOP | Micron
MT4LC4M16R6TG-5

MT4LC4M16R6TG-5 - 4M x 16 EDO DRAM, 50-pin TSOP | Micron

The Micron MT4LC4M16R6TG-5 is a 4 Meg x 16 Extended Data-Out (EDO) dynamic random-access memory organized as 67,108,864 words of 16 bits each, packaged in a 50-pin TSOP (Type II) form factor and designed for a single +3.3V ±0.3V power supply. It features a -5 speed grade, indicating a 50 ns RAS access time, and uses a high-performance CMOS silicon-gate process that delivers low-power consumption suitable for extended battery-life applications. An EDO DRAM is a dynamic random-access memory variant that holds the output data valid longer than a standard Fast Page Mode DRAM by extending the column-address latch, enabling the next cycle to begin without waiting for a full precharge. EDO sits in the historical hierarchy between FPM DRAM and synchronous SDRAM, and was widely adopted in graphics frame buffers, set-top boxes, and PC peripherals before SDRAM displaced it in the late 1990s. EDO parts remain in use today in industrial, instrumentation, and legacy embedded designs where compatibility and long-term supply outweigh bandwidth. Key features include an industry-standard x16 pinout, timing, functions, and package that simplify second-sourcing; 12 row by 10 column addressing for the R6 revision; TTL-compatible inputs, outputs, and clocks; and CMOS-compatible standby current. The device supports read, write, read-write, and read-modify-write cycles, plus EDO page mode for high-bandwidth sequential access. Self-refresh and auto-refresh modes reduce system power by maintaining data without CPU intervention. Architecturally, the MT4LC4M16R6TG-5 integrates four internal memory banks that share the 16-bit data I/O, with multiplexed address inputs, /RAS, /CAS, /WE, and /OE control signals. Refresh is performed via /RAS-only refresh, /CAS-before-/RAS refresh, or hidden refresh, with a 64 ms refresh interval distributed across 4096 refresh cycles. The 50-pin TSOP-II package is optimized for surface-mount assembly on standard 0.8 mm pitch footprints. Typical applications include video frame buffers, laser-printer engines, networking line cards, industrial control panels, set-top box graphics memory, and legacy PC graphics adapters. The wide data bus and EDO page mode make the part especially effective for sequential block transfers such as pixel read/write in graphics subsystems and bit-mapped LCD controllers. The -5 speed grade suits mid-frequency microcontroller and embedded-MPU buses operating in the 25-40 MHz range. When designing with this device, ensure that the host controller generates proper EDO timing with /CAS held low through consecutive cycles and that the supply rail stays within 3.0V to 3.6V. Decouple VCC with a 0.1 µF ceramic capacitor placed within 5 mm of the VCC pin, and respect the 4096-cycle / 64 ms refresh requirement to preserve data integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the original Micron datasheet.

RFQ צור קשר
MT53B128M32D1NP-062 - 4Gbit LPDDR4 SDRAM 1.6GHz | Micron
MT53B128M32D1NP-062

MT53B128M32D1NP-062 - 4Gbit LPDDR4 SDRAM 1.6GHz | Micron

The Micron Technology MT53B128M32D1NP-062 is a 4 Gbit Mobile LPDDR4 SDRAM organized as 128M x 32, operating at a 1.6 GHz clock frequency from a 1.1V supply, housed in a 200-ball WFBGA (10 x 14.5 mm) package. LPDDR4 (Low Power Double Data Rate 4) SDRAM is a member of the JEDEC-defined DDR SDRAM family optimized for mobile and power-sensitive embedded systems. Compared with DDR3L or DDR4, LPDDR4 achieves higher bandwidth per watt by lowering the core supply voltage to 1.1V and using a point-to-point channel architecture. In the memory hierarchy it sits under DRAM -> synchronous DRAM -> mobile SDRAM, and it is the dominant main-memory technology in smartphones, tablets, automotive infotainment, and edge AI platforms. Key features of this device include 4 Gbit density in a single 32-bit channel organization (128M x 32), 1.6 GHz operation (3200 MT/s data rate class), a low 1.1V core supply, and extended industrial or automotive temperature variants (the AUT:A grade is specified from -40C to +125C TC and qualified to AEC-Q100). The -062 speed grade defines the maximum clock frequency of the part. The WFBGA package uses a ball grid array for improved signal integrity and thermal performance relative to wire-bonded alternatives. Technically, the MT53B128M32D1NP family integrates Micron's LPDDR4 core with bank-group architecture, enabling fast random row access and efficient burst interleaving. Low-power features such as partial-array self-refresh, deep power-down, and per-bank refresh reduce standby current, which directly extends battery life in portable designs. The 32-bit single-die organization simplifies controller mapping for mid-density systems that do not require a full 64-bit dual-die configuration. Typical applications include automotive infotainment and instrument cluster memory, industrial human-machine interfaces, edge AI accelerators, networking line cards, and embedded vision systems where 4 Gbit of bandwidth-efficient DRAM is sufficient. When designing with this device, ensure your memory controller supports the JEDEC LPDDR4 protocol, and account for trace-length matching and termination on the high-speed data bus to meet signal-integrity requirements at 1.6 GHz operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-02.

RFQ צור קשר
MT53D512M32D2NP-046 - 16Gbit LPDDR4 2133MHz DRAM | Micron
MT53D512M32D2NP-046

MT53D512M32D2NP-046 - 16Gbit LPDDR4 2133MHz DRAM | Micron

The Micron Technology MT53D512M32D2NP-046 is a 16Gbit Mobile LPDDR4 SDRAM memory IC organized as 512M x 32, operating at a 2.133 GHz data rate from a 1.1V core supply, housed in a 200-ball WFBGA package measuring 10 mm x 14.5 mm. LPDDR4 (Low Power Double Data Rate 4) is a JEDEC-defined class of DRAM optimized for mobile and power-sensitive embedded systems. Within the memory hierarchy, it sits below DDR4 server DIMMs in density per channel but far above them in power efficiency, using a low-voltage interface, deep power-down modes, and per-bank refresh to minimize energy per bit transferred. Key features include the high 16Gbit density in a single package, a 32-bit wide data bus that simplifies controller interfaces for application processors, and the -046 speed grade supporting 2133 MHz operation. Micron's D2NP NP (non-stack, single-die-planar) configuration offers a straightforward signal integrity profile compared with multi-die stacked alternatives. Architecturally, the device uses a standard LPDDR4 core with bank groups, burst length 8 and 16 access modes, and dynamic frequency scaling that lets the host processor reduce the clock in idle periods to cut quiescent power. The 1.1V VDD rail, combined with separate VDDQ I/O domain, allows fine-grained power management in battery-driven designs. Typical applications include mobile smartphone and tablet main memory, automotive infotainment and ADAS platforms (using the AIT/AUT automotive-grade variants), networking appliances, and industrial embedded computing where a compact footprint and low standby current matter. When designing with this device, pay careful attention to the 200-WFBGA fly-by routing topology, length-matched address/command lines, and reference voltage (VREFCA/VREFDQ) decoupling, as LPDDR4 timing budgets are tighter than DDR3L predecessors. On-die termination (ODT) settings should be validated across the full temperature range. This page synthesizes distributor pricing and availability, same-package drop-in alternatives including the MT53E LPDDR4X successor, and practical layout guidance not found in the manufacturer datasheet.

RFQ צור קשר
MT53E1G32D2FW-046 AUT:C - 32Gb LPDDR4X SDRAM | Micron Automotive
MT53E1G32D2FW-046 AUT:C

MT53E1G32D2FW-046 AUT:C - 32Gb LPDDR4X SDRAM | Micron Automotive

The Micron MT53E1G32D2FW-046 AUT:C is a 32 Gbit Mobile LPDDR4X SDRAM memory IC organized as 1G x 32, delivering a parallel data interface at 2.133 GHz clock frequency (3.5 ns access time) in a 200-ball TFBGA (10x14.5 mm) surface-mount package. The device operates from 0.6V/1.1V supplies and is AEC-Q100 qualified for automotive applications, targeting the -40C to +125C automotive grade-2 temperature range. LPDDR4X SDRAM is a low-power double data rate synchronous DRAM standard defined by JEDEC, optimized for mobile, automotive, and embedded platforms. Within the memory hierarchy, LPDDR4X sits between LPDDR4 and LPDDR5: it lowers the I/O voltage from 1.1V to 0.6V versus LPDDR4 while maintaining the same internal VDD of 1.1V, reducing dynamic power by roughly 20% at equivalent throughput. Micron's Mobile LPDDR4X family is widely deployed in automotive infotainment, ADAS controllers, and telematics modules where high density, low power, and AEC-Q100 qualification converge. Key features include a 32 Gbit density in a single die, 32-bit data width per channel, a maximum clock of 2.133 GHz (data rate 4266 MT/s), on-die temperature sensor with auto self-refresh, ZQ calibration, write leveling, auto precharge, asynchronous reset, and data mask function. The 200-TFBGA package (10 x 14.5 mm) integrates the full 32 Gbit on a single chip, eliminating the need for multi-chip packaging at this density. Typical applications include automotive infotainment head units, advanced driver-assistance systems (ADAS) controllers, digital instrument clusters, in-vehicle networking gateways, and ruggedized telematics control units. The wide operating temperature range (automotive grade 2: -40C to +105C with peak support up to +125C) and AEC-Q100 qualification make this part suitable for under-hood and outdoor-mounted automotive modules. When designing with this LPDDR4X, ensure the host SoC supports LPDDR4X (not just LPDDR4), since the 0.6V VDDQ requirement is not backward compatible. Route the high-speed command/address and DQ lanes as impedance-controlled 80-ohm differential or 40-ohm single-ended traces, with length matching within 25 mils across the byte lane.

RFQ צור קשר
MT53E1G32D2FW-046 WT:B - 32Gb LPDDR4 SDRAM | Micron
MT53E1G32D2FW-046 WT:B

MT53E1G32D2FW-046 WT:B - 32Gb LPDDR4 SDRAM | Micron

The Micron MT53E1G32D2FW-046 WT:B is a 32 Gbit Mobile LPDDR4 SDRAM organized as 1G x 32, supplied in a 200-ball TFBGA package measuring 10 mm x 14.5 mm, and clocked at 2.133 GHz (4266 MT/s data rate) with a 3.5 ns clock access time. It supports the LPDDR4 protocol (LPDDR4X-compatible VDDQ/VDD2 combination as published by Micron) and runs from a 1.1 V/1.8 V dual-rail supply, making it a standard-density option for memory-down mobile and embedded designs. What is LPDDR4? LPDDR4 (Low Power Double Data Rate 4) is a JEDEC-standard low-power volatile memory (LPDRAM) category that evolved from DDR SDRAM with the goals of higher bandwidth per watt and lower I/O voltage. It sits in the hierarchy LPDDR4 -> LPDDR -> Mobile DRAM -> Volatile Memory -> DRAM -> Semiconductor IC. Compared with LPDDR3, LPDDR4 introduces a 16-bit-per-channel architecture, lower VDDQ (1.1 V vs 1.2 V), deeper power-down states, and command/address on-package training, all of which raise both frequency headroom and energy efficiency for smartphones, tablets, and AI edge SoCs. The MT53E1G32D2FW-046 WT:B integrates the standard LPDDR4 feature set: auto precharge, data mask, ZQ calibration, write leveling, an on-die temperature sensor, and an asynchronous reset pin. The dual-die-package (DDP) construction delivers 32 Gb (4 GB) in the 200-ball TFBGA while staying within a thin mobile-style footprint, and the -046 speed bin maps to a 2133 MHz clock with 3.5 ns tCK - this matches the JEDEC 4266 MT/s peak data rate for x32, single-channel configurations. Typical applications are 4 GB main memory in smartphones and tablets, automotive infotainment and ADAS memory-down subsystems, AI edge / inference SoC working memory, and always-on companion tiles for wearable and IoT gateways. The wide operating temperature range and AEC-Q100-ready process node also make the device a strong fit for industrial HMI and ruggedized tablets. When designing with this device, follow Micron's reference PCB layout, place the 0.1 uF + 1 uF decoupling network within 1 mm of the balls, and provide a clean 1.1 V/1.8 V rail with low ripple. Use the on-die temperature sensor output to throttle the host SoC and to drive ZQ calibration timing. This page synthesizes distributor pricing, same-package Micron speed-bin and capacity variants, cross-brand pin-to-pin equivalents, and PCB-aware design guidance not bundled in the manufacturer datasheet.

USD $98.44 במלאי
MT53E2G32D4DE-046 - 64Gbit LPDDR4X SDRAM 2133MHz | Micron
MT53E2G32D4DE-046

MT53E2G32D4DE-046 - 64Gbit LPDDR4X SDRAM 2133MHz | Micron

The Micron Technology MT53E2G32D4DE-046 is a 64Gbit mobile LPDDR4X SDRAM organized as 2G x 32, operating at 2133 MHz (3.5 ns cycle) in a 200-ball TFBGA package measuring 10 x 14.5 mm. As an LPDDR4X device, it uses low-VDDQ I/O (1.06 V to 1.17 V supply) to cut interface power versus standard LPDDR4. LPDDR4X (Low Power Double Data Rate 4X) is a JEDEC-defined mobile DRAM interface optimized for battery-powered and bandwidth-hungry systems. In the memory hierarchy it sits as high-density, high-speed working memory: DRAM -> synchronous DRAM -> mobile LPDRAM -> LPDDR4X, providing the main volatile working storage between the application processor and nonvolatile flash storage. Key features include the 64Gbit density in a single die, x32 I/O width, 2133 Mbps data rate per pin, auto precharge, write leveling, ZQ calibration, a built-in temperature sensor, auto self-refresh, data mask (DM) function, and an asynchronous reset input. The temperature sensor enables autonomous self-refresh rate adjustment, protecting data retention while minimizing refresh power across the operating range. Technically, the device is a high-speed CMOS dynamic random-access memory with a 16n-bank architecture and quarter-density bank grouping, transferring on both clock edges at 2.133 GHz effective. The -046 speed bin defines the 3.5 ns clock cycle. Available temperature grades include WT (-25C to +85C), AIT (-40C to +95C, industrial), and AUT (-40C to +125C, automotive), all sharing the same die and 200-ball footprint. Typical applications include AI edge accelerators, NVIDIA Jetson-class modules, automotive infotainment and ADAS domains, 5G network equipment, and industrial HMI systems requiring 8GB-class DRAM with LPDDR4X power efficiency. Design consideration: LPDDR4X fly-by routing requires per-byte write leveling and careful length matching; verify VDD2/VDDQ rail sequencing per the manufacturer datasheet power-up procedure to avoid latch-up. This page synthesizes distributor pricing, temperature-grade alternatives, cross-reference guidance, and practical design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר
MT53E2G32D4DE-046 WT:A - 64Gb LPDDR4X SDRAM 2G×32 | Micron
MT53E2G32D4DE-046 WT:A

MT53E2G32D4DE-046 WT:A - 64Gb LPDDR4X SDRAM 2G×32 | Micron

The Micron MT53E2G32D4DE-046 WT:A is a 64-Gbit Mobile LPDDR4X SDRAM organized as 2G × 32 bits, housed in a 200-ball TFBGA (10 × 14.5 mm) package and specified for the -046 speed grade (2133 MHz clock / 3.5 ns tCK). It operates from a 1.06 V to 1.17 V supply and targets mobile, automotive-cockpit, and ultra-compact embedded designs where low DRAM power and high bandwidth density are critical. The part carries an operating temperature range of -25 °C to +85 °C, suiting commercial and mildly harsh environments. LPDDR4X SDRAM is the low-power double-data-rate successor to LPDDR4, designed for smartphones, tablets, AI edge inference modules, and Always-On mobile platforms. The "X" suffix denotes a reduced I/O voltage (0.6 V VDDQ versus 1.1 V in plain LPDDR4), which lowers interface power by up to ~40% at the same data rate. LPDDR4X inherits LPDDR4's 16n prefetch architecture and PoD/HSUL signaling, and Micron's MT53E family extends this lineage with higher per-die density (up to 64 Gb) and additional low-power states such as Deep Power-Down and Per-Pin VRCG. Key features of the MT53E2G32D4DE-046 WT:A include a 2133 MHz data clock (4266 MT/s effective), dual-channel / dual-rank device organization, on-die temperature sensor, programmable refresh, and a parallel command/address interface compatible with standard LPDDR4X controllers. The 200-ball TFBGA footprint supports 1.0 mm ball pitch and integrates a single die-stack package (SDP) configuration, simplifying PCB layout versus multi-die variants. Architecturally, this device uses Micron's 1y/1z-class DRAM process with internal bank-grouping of 8 banks per channel. Dual-rank operation enables higher capacity without increasing the package ball count, while the 0.6 V HSUL_12 interface reduces I/O power dramatically compared with LPDDR4. The result is a memory well suited to sustained data rates (4266 MT/s peak) while maintaining sub-1 W active power for 64-bit channel bandwidth. Typical applications include smartphone application processors, tablet main memory, AI accelerator edge inference cards (e.g. wearables, smart cameras), and automotive infotainment ECUs requiring -40 °C to +85 °C tolerances. It also fits portable gaming devices, AR/VR head-mounted display buffers, and IoT gateways with on-device AI. When designing in this part, verify controller compatibility with the 0.6 V VDDQ rail and ensure PCB trace matching for the 4266 MT/s data rate. Decoupling must be sized for LPDDR4X burst current (consult Micron TN-46 series for reference). The 200-ball TFBGA requires assembly under JEDEC J-STD-020 MSL-3 profile. This page synthesizes distributor pricing, drop-in alternatives within the MT53E family, and practical PCB / thermal guidance drawn from Micron datasheets and TN-series technical notes - information not bundled on any single distributor page.

RFQ צור קשר
MT53E768M64D4HJ-046 - 48Gbit LPDDR4X SDRAM | Micron
MT53E768M64D4HJ-046

MT53E768M64D4HJ-046 - 48Gbit LPDDR4X SDRAM | Micron

The Micron Technology MT53E768M64D4HJ-046 is a 48Gbit Mobile LPDDR4X SDRAM memory IC organized as 768M x 64, operating at 2133 MHz (2133 Mbps/pin data rate, 3.5 ns access time) with an LVSTL I/O interface, housed in a 556-ball WFBGA (12.4 mm x 12.4 mm) package. LPDDR4X (Low Power Double Data Rate 4X) is a JEDEC-defined high-bandwidth, low-voltage mobile DRAM standard used as the main-system memory in smartphones, tablets, automotive infotainment, and edge-AI compute platforms. LPDDR4X sits within the mobile DRAM hierarchy alongside LPDDR4 and below LPDDR5, and is distinguished from LPDDR4 by a lower VDDQ I/O supply that significantly reduces interface power at the same data rate. Key features of this device include its 48Gbit (6 GB) density in a single package, a wide 64-bit data bus, 2133 MHz clock rate with 3.5 ns access latency, and the ultra-compact 556-ball fine-pitch BGA (FBGA/WFBGA) footprint suited to space-constrained PCBs. Micron offers this die in multiple temperature and status suffixes (AAT, AUT, AIT, WT) covering commercial and automotive-grade operating conditions. The MT53E LPDDR4X family uses a CMOS dynamic memory core with bank-group architecture supporting burst accesses over a parallel interface, and quad-die package (QDP) variants are referenced by distributors (FBGA QDP coding on the B-suffix speed bins). Signals use LVSTL (Low Voltage Swing Terminated Logic) terminated I/O for signal integrity at 2133 Mbps/pin. Typical applications include automotive digital cockpits and ADAS platforms, high-resolution mobile displays and handsets, networking and edge-AI compute modules, and embedded systems requiring multi-gigabyte memory bandwidth in a small footprint. Design consideration: LPDDR4X routing demands strict length matching of the 64-bit data bus, on-die-termination configuration during controller initialization, and a regulated VDD2/VDDCA power rail with fast transient response; consult the Micron datasheet and controller compatibility list before layout. This page synthesizes distributor listings, temperature-suffix variants, and drop-in same-die alternatives not consolidated in the manufacturer part catalog.

RFQ צור קשר
MT58L64L32FT-10 - 2Mb Sync Burst SRAM 10ns 66MHz | Micron
MT58L64L32FT-10

MT58L64L32FT-10 - 2Mb Sync Burst SRAM 10ns 66MHz | Micron

The Micron Technology MT58L64L32FT-10 is a 2-Mbit flow-through synchronous burst SRAM organized as 64K x 32/36 (also configurable as 128K x 18), delivering a fast 10 ns clock/access time at clock rates up to 66 MHz in a 100-lead TQFP (14 x 20.1 mm) package. A synchronous burst SRAM is a static random-access memory that synchronizes address, data, and control inputs to an external clock and generates burst addresses internally, making it a key member of the memory IC family that sits within the broader semiconductor hierarchy (SRAM -> static RAM -> volatile memory -> memory IC -> integrated circuit). Unlike asynchronous SRAMs, burst-mode devices such as the MT58L64L32FT-10 prefetch sequential addresses, reducing effective access time for cache-like workloads and pipelined bus masters. Key features include single +3.3 V power supply (VDD, +0.3 V/-0.165 V tolerance), a separate isolated +2.5 V or 3.3 V output buffer supply (VDDQ) for I/O voltage flexibility, fast clock-to-output and OE# access times, individual BYTE WRITE enable controls, and SNOOZE MODE for reduced-power standby. Common data input/output pins simplify bus routing on 32-bit and 36-bit (byte-parity) systems. Architecturally, the flow-through (non-pipelined) SyncBurst design presents data on the same cycle the address is captured, eliminating pipeline latency and simplifying timing closure for controllers that expect zero-wait-state reads and writes. Registered outputs driven by the internal burst address counter support linear, interleaved, and alternate burst sequences per industry-standard processor burst orders. Typical applications include network router and switch line-card buffering, FPGA and DSP external memory expansion, telecom equipment control-plane memory, industrial controllers, and test instrumentation where deterministic 10 ns access and 66 MHz burst throughput are required. Design considerations: tie VDDQ to the host bus I/O voltage (2.5 V or 3.3 V), use SNOOZE MODE (asserting ZZ) to cut standby power during idle periods, and verify burst-order configuration straps against the host processor (linear vs. interleaved) before layout freeze. This page synthesizes distributor availability data, same-family drop-in speed/temperature variants, and practical design guidance not consolidated in the manufacturer datasheet.

RFQ צור קשר
MT60B2G8HB-48B:A - 2.4 GHz DDR5 16Gb 2Gx8 SDRAM | Micron
MT60B2G8HB-48B:A

MT60B2G8HB-48B:A - 2.4 GHz DDR5 16Gb 2Gx8 SDRAM | Micron

The Micron MT60B2G8HB-48B:A is a 16 Gbit DDR5 SDRAM organized as 2G x 8 (256M x 8 logical bank groups), housed in an 82-ball VFBGA (9x11) package with POD (Pseudo Open Drain) 1.1 V signaling. It operates at a 2400 MHz data clock (4800 MT/s effective), supports on-die ECC, and is qualified for the 0 to 95 °C commercial temperature range. DDR5 SDRAM represents the fifth generation of Double Data Rate synchronous DRAM and follows the JEDEC JESD79-5 standard. Each DDR5 channel now operates as two independent 32-bit sub-channels with on-module voltage regulation, on-die termination, and decision feedback equalization (DFE). This shift from DDR4 more than doubles peak bandwidth per pin, drops VDDQ to 1.1 V for power efficiency, and embeds features that previously required external components, making DDR5 the default memory for server, desktop, and high-performance computing platforms built around Intel Alder Lake/Raptor Lake and AMD Zen 4/5 architectures. Key features of the MT60B2G8HB-48B:A include a 2400 MHz clock with 16 ns tCK minimum, 1.1 V VDD/VDDQ supply, a 16-bit bank-group architecture, internal VrefDQ training, and write/read preamble support. The 82-ball VFBGA (9x11 mm) footprint is the standard JEDEC DDR5 x8 monolithic package and is drop-in compatible across Micron's 8 Gb/16 Gb density options in the same speed grade. Typical applications are DDR5 UDIMM and SODIMM modules, server RDIMM for Intel Sapphire Rapids and AMD Genoa, embedded compute platforms, AI inference accelerators, and high-throughput networking equipment where 4800 MT/s peak bandwidth is required. Design consideration: route the DDR5 channel as two matched 40-ohm sub-channel fly-by topologies with length matching within 5 mils on the host PCB, and follow JEDEC JESD79-5 reference decoupling guidance. POD signaling requires careful VrefDQ capacitor placement within 200 mils of the device. This page synthesizes distributor pricing, drop-in alternatives from the same Micron DDR5 family, and practical design notes that complement - but do not replace - the Micron datasheet.

RFQ צור קשר
MT60B2G8RZ-64B-IT-H - 16Gb DDR5 SDRAM 3.2 GHz 78-FBGA | Micron
MT60B2G8RZ-64B-IT-H

MT60B2G8RZ-64B-IT-H - 16Gb DDR5 SDRAM 3.2 GHz 78-FBGA | Micron

The Micron MT60B2G8RZ-64B-IT-H is a 16 Gbit DDR5 SDRAM memory IC organized as 2G × 8, operating at up to 3.2 GHz data rate in a 78-ball Fine-pitch Ball Grid Array (FBGA) measuring 7.5 mm × 11 mm, in industrial temperature grade (IT). It is a JEDEC-compliant DDR5 SDRAM component designed for high-bandwidth, low-voltage memory subsystems in mainstream server, client, and embedded platforms. What is a DDR5 SDRAM? DDR5 (Double Data Rate 5) Synchronous DRAM is the fifth generation of DDR memory, succeeding DDR4. Compared with DDR4, DDR5 doubles the peak data rate (starting at 3200 MT/s with on-die termination and decision feedback equalization), halves the channel voltage (1.1 V VDD, 1.1 V VDDQ), introduces on-die ECC, and doubles bank group counts to improve parallelism. In the broader taxonomy: DRAM -> volatile memory -> semiconductor memory -> integrated circuit. The MT60B2G8RZ-64B-IT-H therefore sits in the volatile main-memory tier of any computing platform. Key features include a maximum operating supply current of 363 mA, an industrial operating temperature range of 0 °C to +95 °C, a 1.1 V nominal supply (VDD/VDDQ), on-die termination (ODT), and a 78-ball FBGA package that supports high-speed signaling at 3200 MT/s. The 7.5 mm × 11 mm outline is shared across Micron's 16 Gb DDR5 ×8 family, enabling drop-in compatibility across density, speed, and temperature grades. The device uses a fly-by topology for command, address, control, and clock signals, and integrates an on-DIMM voltage regulator (PMIC interface) for client DIMM-style deployments. Decision Feedback Equalization (DFE) and Write Leveling maintain signal integrity at 3200 MT/s, while the 16n prefetch and bank-group architecture double the effective page size compared to DDR4. Typical applications include DDR5 UDIMM and SODIMM modules for desktop and notebook platforms, embedded computing platforms requiring industrial-grade memory, single-board computers (SBC) and edge AI accelerators, networking line cards with high packet buffer demand, and entry-level server memory modules. The IT grade makes it suitable for harsher thermal envelopes than commercial-grade DRAM. When designing with this part, follow JEDEC JESD79-5 PCB layout and routing rules for DDR5: keep the byte-group DQ/DQS lengths matched within 5 mil, maintain a 100 Ω differential impedance on DQ/DQS pairs, and use a reference termination scheme compliant with the host memory controller's RTT selections. The DRAM does not require an external PMIC on the component itself but expects a 1.1 V rail in system designs. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, all verified as of 2026-10-05.

RFQ צור קשר
MT62F1536M32D4DS-023 - 48Gbit LPDDR5X SDRAM | Micron Technology
MT62F1536M32D4DS-023

MT62F1536M32D4DS-023 - 48Gbit LPDDR5X SDRAM | Micron Technology

The Micron Technology MT62F1536M32D4DS-023 is a 48Gbit Mobile LPDDR5X SDRAM memory IC organized as 1.5G x 32, operating at up to 4.266 GHz with LVSTL (Low Voltage Swing Terminated Logic) interface signaling, supplied in a 315-ball TFBGA (12.4 mm x 15 mm) surface-mount package. LPDDR5X (Low Power Double Data Rate 5X) is the extended-speed evolution of the LPDDR5 DRAM standard defined by JEDEC, engineered for mobile and power-constrained computing. As a volatile SDRAM within the broader memory hierarchy (DRAM -> mobile DRAM -> LPDRAM), it stores working data for application processors while minimizing power per bit transferred, making it the dominant main-memory technology in smartphones, tablets, and AI edge devices. Key features of this component include the 48 Gbit (6 GB) density in a single package, the 1.5G x 32 organization that supports wide 32-bit memory channels, and the LPDDR5X speed grade supporting a 4.266 GHz clock rate - a substantial bandwidth uplift over LPDDR5 (3.2 GHz, as seen in the related WT:B variant). The LVSTL interface reduces I/O swing to lower simultaneous-switching noise and I/O power at multi-gigahertz data rates. The device operates from a supply voltage of 1.01 V to 1.12 V (VDDQ domain), reflecting the reduced core and I/O voltages that define the LPDDR5X generation. The 315-TFBGA package (12.4 x 15 mm) uses a fine-pitch ball grid array to accommodate the high ball count required by the 32-bit data bus, address/control, and power delivery - a footprint intended for HDI (high-density interconnect) mobile-class PCB stackups. Typical applications include flagship smartphone main memory, AI accelerator and edge-inference modules that stream large weight arrays, automotive infotainment and ADAS domains (the AEC-Q100-qualified AUT:C variant of this same die serves that market), and high-performance portable compute such as tablets and XR headsets. High bandwidth at low power per gigabyte is the common requirement across all of these. Design consideration: LPDDR5X signal integrity demands strict length matching of the data groups, careful controller training for read/write eye margins, and following the power-rail sequencing and termination guidance in the manufacturer datasheet; reuse a validated reference layout rather than improvising the fly-by topology. This page synthesizes distributor pricing and availability, drop-in same-die variant comparisons (WT, AUT, AAT, AIT speed/temperature options), and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
MT62F1G32D2DS-026 WT:C - 32Gb LPDDR5 SDRAM 3.2GHz 315-TFBGA | Micron
MT62F1G32D2DS-026 WT:C

MT62F1G32D2DS-026 WT:C - 32Gb LPDDR5 SDRAM 3.2GHz 315-TFBGA | Micron

The Micron MT62F1G32D2DS-026 WT:C is a 32 Gbit Mobile LPDDR5 SDRAM memory IC organized as 1G x 32 bits, operating at a 3.2 GHz parallel clock and housed in a 315-ball TFBGA (12.4 x 15 mm) surface-mount package. According to Micron's LPDDR5 part catalog, this device is qualified for the JEDEC LPDDR5 standard and targets power-constrained mobile platforms. LPDDR5 (Low-Power Double Data Rate 5) is the fifth generation of JEDEC-standardized low-power DRAM, succeeding LPDDR4/LPDDR4X. As a Mobile SDRAM, it belongs to the hierarchy volatile memory -> DRAM -> SDRAM -> Mobile SDRAM -> LPDDR5, and is engineered for applications where both high bandwidth and very low standby power are mandatory. LPDDR5 introduces per-channel decision feedback equalization (DFE), data-copy and write-X features that reduce SoC-to-DRAM traffic, and a deep sleep mode that cuts refresh current. The MT62F1G32D2DS is a dual-channel (32-bit I/O width) part aimed at flagship smartphone APs, AI edge accelerators, and thin-and-light notebooks. Key features include a 32 Gbit density (8 banks per channel × 2 channels), a 3.2 GHz data-rate clock (6400 MT/s per pin in the -026 speed grade), 1.05 V typical VDD supply voltage, and 0.9 V/1.2 V selectable VDDQ. The device supports on-die ECC for single-bit error correction in automotive and industrial workloads, and integrates a temperature-compensated refresh engine. The -026 speed bin corresponds to a 3.2 Gb/s/pin transfer rate in this part numbering scheme. The MT62F1G32D2DS-026 WT:C uses a 315-ball TFBGA package with a 0.5/0.8 mm pitch, optimized for high-density mobile PCB layouts. Two 16-bit channels share the package balls, with dedicated clock, command, and data byte lanes per channel. The package's 12.4 x 15 mm footprint and 1.0 mm max height make it compatible with smartphone motherboard stack-ups that include the application processor, the PMIC, and a discrete Wi-Fi/Bluetooth module on the same PCB. Typical applications include flagship smartphones and tablets, ultra-thin notebooks, AR/VR headsets, AI edge inference modules, automotive infotainment platforms, and 5G mmWave modem sub-assemblies. This MT62F1G32D2DS-026 WT:C variant (commercial temperature range, WT designator) is the mainstream consumer-grade SKU, while the WT:B and WT:A suffix variants target industrial/automotive-grade qualification. When designing with this part, ensure the SoC's LPDDR5 PHY supports the 6400 MT/s data rate and the 32-bit dual-channel configuration. The PCB layout must match Micron's reference 4-layer or 6-layer stack-up to keep the channel loss under 6 dB at 3.2 GHz; use 100 ohm differential impedance for the clock pair and CA/CS signals. Decoupling must follow Micron's Mobile LPDDR5 PCB design guide.

RFQ צור קשר
MT62F512M64D4EK-031 AIT:B - 32Gb LPDDR5 SDRAM 512Mx64 3.2GHz | Micron
MT62F512M64D4EK-031 AIT:B

MT62F512M64D4EK-031 AIT:B - 32Gb LPDDR5 SDRAM 512Mx64 3.2GHz | Micron

The Micron MT62F512M64D4EK-031 AIT:B is a 32 Gbit Mobile LPDDR5 SDRAM organized as 512M x 64 in a 441-TFBGA (14x14) surface-mount package, operating up to 3.2 GHz with a maximum per-channel bandwidth of 12.8 GB/s. It is qualified to AEC-Q100 standards and ships in an industrial temperature grade suitable for harsh-environment automotive and embedded platforms. An LPDDR5 SDRAM is a fifth-generation low-power double data rate synchronous DRAM designed for mobile and power-constrained systems. LPDDR5 improves on LPDDR4X by introducing multi-clock command/address inputs, deeper prefetch (16n-bit or 32n-bit), higher per-pin bandwidth via CKR (Clock Request) support, and on-die error correction code (ECC). LPDDR5 sits within the SDRAM family -> DRAM -> volatile memory -> integrated circuit taxonomy, and is the dominant low-power main memory in smartphones, automotive infotainment, AI edge accelerators, and always-on embedded SoCs. Key features of the MT62F512M64D4EK-031 AIT:B include a 4 KB page size with 8-bank mode (or 2 KB page with 16-bank / bank group mode), ZQ calibration, on-chip ECC, asynchronous reset, data mask function, and optional CKR support. Differential command clock (CK_t/CK_c) and data clock (WCK_t/WCK_c) signaling improve signal integrity at high data rates. The QDP (Quad Die Package) configuration stacks four 8 Gb dies to reach 32 Gb density. Architecturally the device uses a 16n prefetch datapath feeding four 8 Gb LPDDR5 dies in a single 441-ball TFBGA, providing x64 channel width across two channels. The 031 speed bin denotes 6400 MT/s operation per pin, achieving the 12.8 GB/s peak per-channel bandwidth figure quoted by Micron. Typical applications include automotive ADAS compute platforms, in-vehicle infotainment (IVI), AI edge inference modules, premium smartphone application processors, and ruggedized industrial tablets. Designers choose this part for its AEC-Q100 qualification, large 32 Gb density, and the high bandwidth density per watt that LPDDR5 delivers versus LPDDR4X. When designing in this device, allocate adequate PCB area for the 14 mm x 14 mm BGA and route the differential CK/WCK pairs with length matching within the JEDEC LPDDR5 skew tolerance. Use Micron's reference PCB design guide for impedance and decoupling. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
MT62F6G24D156A-001 - 96Gbit Mobile LPDDR5 SDRAM | Micron
MT62F6G24D156A-001

MT62F6G24D156A-001 - 96Gbit Mobile LPDDR5 SDRAM | Micron

The Micron MT62F6G24D156A-001 is a high-density Mobile LPDDR5 SDRAM memory IC in the Micron LPDDR5 family. Decoding the Micron naming convention, the device integrates 96 Gbit of storage in a 563-ball fine-pitch BGA package, organized across multiple die stacks to deliver the bandwidth required by advanced mobile, automotive, and edge-AI platforms. A Mobile LPDDR5 (Low-Power Double Data Rate 5) SDRAM is a JEDEC-standard volatile memory that operates at low voltage (typically 1.05–1.1 V VDD and 0.9–1.0 V VDDQ) while delivering high data rates through a 16n prefetch architecture and double-data-rate I/O. LPDDR5 sits above LPDDR4X in the low-power DRAM taxonomy, trading slightly higher complexity for substantially higher bandwidth per pin and improved refresh management. It belongs to the wider class of synchronous DRAM, which itself is a subset of volatile memory ICs used as main system memory in compute platforms. Key features of the MT62F6G24D156A-001 family include high per-pin data rates (up to 6400 MT/s in LPDDR5X-class extensions), deep command/address scrambling for link robustness, on-die ECC for soft-error mitigation, and per-byte VDDQ voltage scaling that minimizes platform power. The device supports both single-rank and multi-rank channel topologies, and the 563-ball BGA exposes a wide 64-bit data interface (x64) for parallel data transfer at multi-GHz effective rates. The MT62F6G24D156A-001 is built on Micron's advanced 1y/1z-class DRAM process with Through-Silicon-Via (TSV) or wire-bond multi-die stacking in a single package, which yields a small PCB footprint relative to its capacity. The 563-ball BGA integrates ground/VDD/VDDQ decoupling balls, command/address balls, and the data DQ/DQS balls. This architecture is engineered for sustained high-bandwidth operation while keeping DRAM-array refresh current low — critical for always-on and thermally constrained platforms. Typical applications include high-end smartphone main memory, automotive infotainment and ADAS platforms, AI PC and edge inference accelerators, and 5G mmWave baseband subsystems. The combination of high density (96 Gbit), wide x64 channel width, and LPDDR5 power efficiency makes it particularly suited to designs that require multi-gigabyte system memory in a thermally constrained enclosure. When designing with this device, follow the Micron LPDDR5/LPDDR5X reference PCB layout for the 563-ball BGA: matched-length routing on the data byte lanes, proper VDD/VDDQ decoupling, and tight skew control on CK_t/CK_c. Confirm thermal headroom under sustained write workloads, as multi-gigabyte transfers at 6400 MT/s can push junction temperature above the commercial-grade limit if airflow is limited. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the official Micron datasheet and PCB-layout application notes.

RFQ צור קשר
MT65B12G16080A00QG-92:A - 24GB HBM3E 2.3GHz X1088 WFPGA | Micron
MT65B12G16080A00QG-92:A

MT65B12G16080A00QG-92:A - 24GB HBM3E 2.3GHz X1088 WFPGA | Micron

The Micron MT65B12G16080A00QG-92:A is a 24 GB HBM3E (High Bandwidth Memory 3E) stacked DRAM device organized as X1088 with a 2.3 GHz data-rate specification, supplied in a WFPGA package. It is the latest generation of Micron's HBM family targeted at AI accelerators, GPU compute dies, and high-performance computing SoCs that require terabyte-per-second aggregate bandwidth from a compact, vertically stacked memory sub-system. HBM (High Bandwidth Memory) is a JEDEC-standardized 3D-stacked DRAM architecture that places multiple DRAM dies atop a base logic die through TSV (Through-Silicon Via) interconnects. It belongs to the wider hierarchy: stacked DRAM -> graphics DRAM -> volatile memory -> semiconductor memory. Compared with conventional GDDR, HBM uses a wide 1024-bit per stack interface and a 3D package to deliver far higher bandwidth at lower power-per-bit, making it the preferred memory for AI training and inference engines. Key specifications for this part include a 24 GB density per stack, an X1088 channel organization, a 2.3 GHz effective data rate, a wide I/O interface, and operation over the standard HBM3E voltage range. The WFPGA package integrates the stacked die and the base logic die into a single customer-facing footprint that mates to a host accelerator or GPU silicon through a fine-pitch BGA-style interconnect. Architecturally, HBM3E increases per-pin data rates and tightens timing margins over HBM3, while keeping the same 1024-bit interface per stack and the same channel/row-bank structure. The device is used in multi-stack configurations (typically 4H, 6H, 8H, or 12H) to scale bandwidth up to roughly 1 TB/s and beyond, with independent channels allowing concurrent read/write across multiple processing units. Typical applications include AI/ML training accelerators (NVIDIA H200-class GPUs, custom ASICs), high-end inference platforms, HPC simulation, and advanced graphics. The 24 GB density per stack enables very large model weights to be co-located with compute, reducing off-chip traffic. When designing with this device, follow JEDEC HBM3E thermal and signal-integrity guidelines, including controlled-impedance routing, decoupling, and a heatsink or cold-plate to manage the high sustained bandwidth power profile.

RFQ צור קשר
MT8816AP1 - 8x16 Analog Crosspoint Switch IC | Microchip
MT8816AP1

MT8816AP1 - 8x16 Analog Crosspoint Switch IC | Microchip

The Microchip Technology MT8816AP1 is an 8x16 analog crosspoint switch IC housed in a 44-pin PLCC (16.59x16.59 mm) package, originally designed by Zarlink (now Microchip) in ISO-CMOS technology. It provides 128 bilateral analog switches arranged as an 8-row by 16-column array, controlled by a built-in 7-to-128 line decoder and transparent data latches. The device supports a wide analog signal range of ±12 V peak-to-peak across the switch array while operating from a single supply. An analog crosspoint switch is a semiconductor device that allows any of M input channels to be connected to any of N output channels through a programmable matrix, forming the switching core of telecom test equipment, audio routing systems, and instrumentation. The MT8816 family belongs to the broader category of analog switches and multiplexers, which sit hierarchically under interface ICs in the signal-chain taxonomy: analog crosspoint switch -> analog switch -> multiplexer -> interface IC -> integrated circuit. ISO-CMOS technology refers to a dielectrically-isolated CMOS process that yields low leakage, high latch-up immunity, and excellent analog signal integrity for audio-frequency and baseband signal routing. Key specifications include a maximum on-resistance of 65 ohm at VDD and 100 ohm at lower supply rails, low distortion full-CMOS switching, low feedthrough, and short set-up and hold times for the digital control interface. The 7-to-128 decoder means only seven address lines plus one data line are required to control all 128 crosspoints, simplifying host-ASIC or microcontroller glue logic. The integrated latch retains the last selected switch state without continuous address-bus activity, lowering software overhead in PCM/telecom and ATE designs. Typical applications include telecommunications line cards (T1/E1 switching, time-slot interchange), PCM test access, video and audio signal routing, automated test equipment (ATE) pin electronics, and PBX/key-system line selection. The wide ±12 V analog headroom makes it suitable for codec loopback and subscriber-line interface circuits. When designing with the MT8816AP1, observe absolute maximum analog signal ratings and provide adequate VDD decoupling to keep digital switching transients out of the analog path. Use the EN pin and address latches to implement broadcast or sequential-scan patterns and minimize channel-to-channel charge injection in measurement paths. This page consolidates distributor pricing, drop-in alternative candidates, and practical design guidance that supplements the manufacturer datasheet and accelerates your component selection.

RFQ צור קשר
MT88L70AS1 - 3V DTMF Receiver SOIC-18 | Microchip Technology
MT88L70AS1

MT88L70AS1 - 3V DTMF Receiver SOIC-18 | Microchip Technology

The Microchip Technology MT88L70AS1 is a complete 3V DTMF (Dual-Tone Multi-Frequency) receiver IC integrating both a bandsplit filter and a digital decoder in a single 18-pin SOIC package. It features internal gain-setting amplifier, adjustable guard time, central-office-quality DTMF decoding, power-down mode, inhibit mode, and low power consumption, and is functionally compatible with the Zarlink MT8870D. A DTMF receiver is a tone-decoding interface IC used in telephone and VoIP systems, security panels, remote control, and industrial command decoders to detect standard 16-tone DTMF pairs transmitted on the audio path. It belongs to the broader class of telecom interface ICs (hypernymy: DTMF receiver -> tone decoder -> telecom interface IC -> interface IC -> integrated circuit). DTMF receivers remain relevant in legacy PSTN endpoints, two-way radio signalling, and any audio-band command channel where robust in-band signalling is required. The MT88L70AS1 operates from a 3V supply, making it well suited to battery-powered and portable equipment. Key features include switched-capacitor band-split filters for the standard high-group and low-group DTMF frequencies, a digital counting decoder that outputs a 4-bit code for the 16 DTMF pairs, and an internal gain-setting amplifier that allows direct connection to the line. An adjustable guard time minimises false decoding on transient tones, while power-down and inhibit modes reduce quiescent current in standby. Architecturally, the device combines analog switched-capacitor filtering with digital decoding, allowing the entire DTMF receiver function with minimal external components. The MT88L70AS1 is the 18-pin SOIC variant of the MT88L70 family (also available in 20-pin SSOP as MT88L70AN1 and in 20-pin SSOP tape-and-reel). The original part was developed by Mitel/Zarlink; Microchip acquired the product line and continues to manufacture it as an active legacy part. Typical applications include telephone answering machines, remote control decoders, security alarm panels, two-way radio signalling, industrial command-over-audio links, and any system that needs to detect 16-tone DTMF signalling from a 3V supply rail. Designers of new low-power consumer or industrial products that interface to legacy PSTN or audio-band command channels frequently select the MT88L70AS1 for its 3V operation, central-office decoding quality, and proven pin-out. When designing with this device, ensure the input audio level is within the specified range and add adequate supply decoupling near the VDD pin. Use the standard crystal or external clock as documented in the datasheet to maintain filter accuracy, and adjust the external RC for the desired guard time and minimum tone duration. This page synthesises distributor pricing, drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet alone, helping engineers select the right DTMF receiver for new and legacy designs.

RFQ צור קשר
MT8LSDT1664AG10E - 128MB PC100 SDRAM DIMM | Micron
MT8LSDT1664AG10E

MT8LSDT1664AG10E - 128MB PC100 SDRAM DIMM | Micron

The Micron MT8LSDT1664AG10E is a 128 MB (16 Meg x 64) unbuffered 168-pin SDRAM Dual In-Line Memory Module (DIMM) organized as 16M x 64 in the PC100/PC133 JEDEC-standard form factor. It operates from a single +3.3V ±0.3V power supply and uses fully synchronous SDRAM components clocked at 125 MHz (PC100) and 133 MHz (PC133), delivering the bandwidth and latency required by late-1990s desktop systems, Pentium III/early Athlon motherboards, and legacy industrial SBCs. A SDRAM (Synchronous Dynamic Random-Access Memory) module is a type of volatile memory that synchronizes data transfers with the system clock, allowing burst-mode reads and writes at one operation per clock cycle. SDRAM DIMMs sit at the base of the PC memory hierarchy (registers/cache → DRAM → storage), and unbuffered (UDIMM) variants like the MT8LSDT1664AG10E are intended for desktops and workstations where the chipset drives the address/command bus directly without a register buffer. This Micron part is part of the legacy MT8LSDT1664A/MT16LSDT3264A DIMM family that defined the PC100/PC133 era. Key features of the MT8LSDT1664AG10E include a 6 ns access time (the "-10E" speed grade), CL2 CAS Latency support at 100 MHz, gold edge-finger contacts (the "G" suffix), operation from 0°C to +70°C (commercial temperature range), fully synchronous operation with all signals referenced to the rising clock edge, and JEDEC-standard pinout that allows drop-in replacement across compliant 168-pin UDIMM sockets. The 168-pin DIMM format uses a 64-bit data bus without ECC, which matches the bandwidth requirements of the Intel 440BX, VIA Apollo Pro, and SiS 630/633 chipset families. Typical applications for the MT8LSDT1664AG10E include legacy desktop PC memory upgrades, industrial single-board computer main memory, factory-floor PC/104 systems, test-and-measurement instrumentation that requires PC-compatible memory, refurbished legacy server base memory, and older point-of-sale terminals. The unbuffered, non-ECC organization makes it unsuitable for registered ECC server platforms; for those systems, the MT9LSDT1672AG (registered, ECC) variant is the recommended replacement. When designing or servicing with this module, observe the JEDEC initialization sequence: hold CKE low, apply stable VDD/VDDQ simultaneously, wait 100 µs, then issue a PRECHARGE-ALL and two AUTO-REFRESH commands before normal operation. Mixed-speed modules in the same bank may force the system to the slowest CAS latency, so populate banks with matched speed grades where possible. The module has reached end-of-life from Micron and is now sourced primarily through the secondary/aftermarket channel. For procurement, verify the full Micron datasheet and confirm the exact speed grade (-10E = 6 ns / 100 MHz CL2) and the gold-finger ("G") contact option. Note that the MT8LSDT1664AG10EE1 variant adds an additional testing/qualification suffix; the -10E base part is the canonical PC100 128 MB reference. This page synthesizes distributor availability, drop-in alternatives, and practical legacy-DIMM design notes not found in the standalone manufacturer datasheet.

RFQ צור קשר
MTA18ASF2G72PZ-2G6E1 - 16GB DDR4-2666 ECC RDIMM | Micron
MTA18ASF2G72PZ-2G6E1

MTA18ASF2G72PZ-2G6E1 - 16GB DDR4-2666 ECC RDIMM | Micron

The Micron MTA18ASF2G72PZ-2G6E1 is a 16 GB DDR4-2666 ECC Registered DIMM (RDIMM) module organized as a single-rank x4 (1Rx4) configuration, operating at 1.2 V and built on a 288-pin form factor designed for server and enterprise workloads. It delivers a peak transfer rate of 2666 MT/s (PC4-21300) with a CAS latency of 19 clocks and integrated ECC for error correction in mission-critical environments. The module is now in Micron's obsolete RDIMM catalog per the manufacturer product page. A DDR4 RDIMM is a type of registered dual in-line memory module that places a register buffer between the DRAM chips and the memory controller, reducing the electrical load on the controller and enabling higher capacity and reliability per channel. Within the broader hierarchy, RDIMMs belong to the DRAM module category, which itself falls under memory modules, memory ICs, and ultimately semiconductors. RDIMMs are the standard memory form for two-socket and four-socket x86 servers, where ECC and registered buffering are required for data integrity and platform stability. The MTA18ASF2G72PZ-2G6E1 features on-module thermal sensors, parity checking on command/address signals through the register, and 1.2 V operation that reduces module power by approximately 20% versus DDR3 LRDIMMs. The x4 data organization maximizes error-correction granularity, allowing single-bit correctable errors to be detected and fixed without affecting adjacent data lanes. Rank count and organization make this module compatible with platforms validated for 16 GB 1Rx4 DDR4-2666 RDIMMs. Typical applications include HPE ProLiant Gen10 servers such as the BL460c, DL160, DL180, and DL325 platforms, virtualization hosts running VMware ESXi or Hyper-V, in-memory database servers for SAP HANA or Redis Enterprise, and high-performance computing nodes. The 2666 MT/s speed and ECC support make it well-suited for transactional database workloads where predictable latency and data integrity are critical. When deploying this module, ensure the server platform supports 1Rx4 16 GB DDR4-2666 RDIMMs at the rated speed; some older platforms will down-clock to 2400 MT/s. Always populate identical MPNs per memory channel to avoid mixed-rank compatibility issues. Given its obsolete status per Micron, designers should verify long-term availability before specifying this part in new designs.

RFQ צור קשר
MTA18ASF4G72PZ-3G2E1 - 32GB DDR4-3200 ECC RDIMM | Micron
MTA18ASF4G72PZ-3G2E1

MTA18ASF4G72PZ-3G2E1 - 32GB DDR4-3200 ECC RDIMM | Micron

The Micron MTA18ASF4G72PZ-3G2E1 is a 32 GB registered DDR4 SDRAM memory module (RDIMM) operating at 3200 MT/s (PC4-25600) in a 288-pin DIMM form factor. According to Micron's RDIMM catalog page, the module is built from 1Rx4 (single-rank) x4 DRAM components and supports an industry-standard 1.2 V VDD supply, with on-module ECC for error correction in mission-critical server and workstation platforms. A Registered DIMM (RDIMM) is a type of computer memory module that adds a register buffer between the DRAM chips and the memory controller. This buffer reduces the electrical load on the memory controller, allowing more DIMM slots per channel and higher memory density in enterprise servers. RDIMMs belong to the broader category of DDR4 SDRAM modules, which themselves are a generation of double data rate synchronous DRAM used as system main memory. DDR4 RDIMMs are the workhorse memory form factor for rack-mount servers, workstations, and high-end computing platforms. The key specifications that define this module are: 32 GB total capacity in a single-rank configuration (1Rx4), 3200 MT/s data rate (PC4-25600, CL22), 1.2 V supply voltage (per JEDEC DDR4 standard), and ECC support enabled by an on-module register and parity. The module uses standard 288-pin gold-finger edge contacts and is populated in the Micron server-memory line that drops into Intel Xeon Scalable and AMD EPYC server platforms. In practice, the module integrates a register clock driver (RCD) that buffers command, address, and control signals to the DRAM devices, reducing the capacitive load seen by the host CPU's memory controller. This buffering is what enables four-, six-, and eight-DIMM-per-channel configurations that are typical of dual-socket servers. The ECC capability detects and corrects single-bit errors on-the-fly, which is essential for virtualization, in-memory databases, and other workloads where silent memory corruption would cause data loss. Typical applications for the MTA18ASF4G72PZ-3G2E1 include enterprise servers (Dell PowerEdge, HPE ProLiant, Lenovo ThinkSystem), high-performance workstations (single and dual-CPU), virtualization hosts running VMware vSphere or Hyper-V, and in-memory analytics platforms such as SAP HANA. The 32 GB capacity strikes a balance between per-DIMM density and cost, making it a popular choice for memory upgrades and for replacing failed modules in legacy DDR4 server fleets. When deploying this module, verify that the host platform's memory controller supports DDR4-3200 (or falls back gracefully to a lower speed). Mixed-rank or mixed-capacity populations across channels are supported by JEDEC but should follow the platform's population guidelines for best performance. The module is hot-swap-friendly on most server backplanes but should be inserted only with full power removed to avoid damaging the gold-finger contacts. This page synthesizes distributor pricing, drop-in alternatives from the same Micron OEM family, and practical design notes not found on a single manufacturer datasheet, giving engineers a complete sourcing reference for the MTA18ASF4G72PZ-3G2E1.

RFQ צור קשר
MTC10F1084S1RC56BD1 - 16GB DDR5-5600 ECC RDIMM 1Rx8 | Micron
MTC10F1084S1RC56BD1

MTC10F1084S1RC56BD1 - 16GB DDR5-5600 ECC RDIMM 1Rx8 | Micron

The Micron MTC10F1084S1RC56BD1 is a 16 GB DDR5-5600 ECC Registered DIMM (RDIMM) server memory module in a 288-pin RDIMM form factor with a 1Rx8 single-rank x8 organization. Operating at a 5600 MT/s data rate (PC5-44800) and a nominal 1.1 V VDD, the module is fully compliant with the JEDEC DDR5 RDIMM standard and is targeted at enterprise server and workstation platforms. The S1 product family designation denotes Micron's server-grade DRAM modules with on-board ECC and register/buffer functions for signal integrity in high-density memory channels. A DDR5 Registered DIMM is a server-class memory module that uses a register clock driver (RCD) to buffer command, address, and control signals between the host memory controller and the DRAM devices, enabling higher capacity and better signal integrity than unbuffered modules. RDIMMs also include ECC (Error-Correcting Code) capability to detect and correct single-bit errors, making them the dominant form factor for mission-critical servers, cloud datacenters, and HPC workloads. DDR5 represents the current generation of synchronous DRAM, doubling peak transfer rates over DDR4 while introducing on-module voltage regulation (PMIC), decision feedback equalization (DFE), and improved refresh schemes. The MTC10F1084S1RC56BD1 features a CAS Latency of CL46, an on-module PMIC for power management, and Micron's 1Rx8 single-rank architecture using 16 Gb DDR5 SDRAM components. The module supports on-die ECC, side-band ECC transparency via the host chipset, and operates within the JEDEC-standard 0 to 95 °C ambient temperature range for server deployment. Thermal sensors on the SPD hub allow real-time monitoring via the system's BMC. Typical applications include enterprise rack servers (1U/2U), hyperconverged infrastructure nodes, AI training/inference GPU servers (as CPU-attached memory), virtualization hosts, in-memory databases, and high-performance computing clusters. The 1Rx8 single-rank organization is preferred for workloads sensitive to memory latency and for systems that populate DIMM slots one-per-channel for maximum bandwidth. When designing with this module, confirm host platform compatibility on the server OEM's memory compatibility list (QVL) before deployment. DDR5-5600 (native speed) typically requires a 12th-gen Intel Xeon Scalable or AMD EPYC 9004/9005 platform; lower-rated platforms may down-clock the module. Always populate modules in matched sets per channel to maintain full bandwidth. This page synthesizes distributor pricing, cross-reference drop-in alternatives (including other Micron SKU variants and OEM-compatible equivalents), and practical server-deployment design notes not consolidated on the manufacturer product page.

RFQ צור קשר
MTC10F1084S1RC56BD1-TR - 16GB DDR5-5600 ECC RDIMM 1Rx8 | Micron
MTC10F1084S1RC56BD1-TR

MTC10F1084S1RC56BD1-TR - 16GB DDR5-5600 ECC RDIMM 1Rx8 | Micron

The Micron MTC10F1084S1RC56BD1-TR is a 16 GB DDR5-5600 ECC Registered DIMM (RDIMM) server memory module organized as 1Rx8 (single-rank, x8 data width), supplied in Tape & Reel packaging as indicated by the "-TR" suffix. The module conforms to the JEDEC DDR5 standard, operates at a 5600 MT/s transfer rate (PC5-44800), uses a 1.1 V supply, and is built on a 288-pin RDIMM edge connector. A server-class DDR5 RDIMM is a buffered, error-correcting memory module that places a registered clock driver on the address and command signals between the host CPU and the DRAM devices. Within the broader hierarchy, RDIMMs belong to the DRAM family -> volatile system memory -> server/workstation memory tier. They are used in multi-socket servers and enterprise platforms where signal integrity, capacity scaling, and data integrity (via ECC) are required. Key features of this module include 16 GB capacity per module, 5600 MT/s peak transfer rate (PC5-44800), on-die ECC plus sideband ECC for end-to-end data integrity, a registered buffer for high-rank scalability, 1Rx8 organization for balanced cost-per-GB, 1.1 V operation for lower power versus DDR4, and a 288-pin edge connector keyed for RDIMM slots. Micron's server DRAM SKUs are also DID-agnostic, allowing Micron to substitute equivalent compatible parts at shipment when inventory shifts occur. The MTC10F1084S1RC56BD1-TR is designed for OEM server platforms that list a Supermicro cross-reference or equivalent DDR5-5600 1Rx8 16 GB RDIMM. The "-TR" suffix denotes Tape & Reel packaging rather than tray, which is typically used for system integrators and OEM assembly lines. Typical applications include single- and dual-socket Xeon / EPYC servers, virtualization hosts, in-memory database nodes, AI inference edge servers, and enterprise storage controllers. The 1Rx8 configuration provides a balance of capacity and channel rank population that suits mainstream server workloads. When designing with this module, confirm that the server's memory controller and BIOS support DDR5-5600 (PC5-44800) RDIMMs at 1.1 V. For multi-module-per-channel configurations, verify the populated rank count is within the platform's validated compatibility list. Mixing RDIMMs of different ranks or speeds will force the memory bus to fall back to the slowest module's timing.

RFQ צור קשר
MTC20C2085S1EC56BR - 32GB DDR5-5600 ECC UDIMM 2Rx8 CL46 | Micron
MTC20C2085S1EC56BR

MTC20C2085S1EC56BR - 32GB DDR5-5600 ECC UDIMM 2Rx8 CL46 | Micron

The Micron MTC20C2085S1EC56BR is a 32 GB DDR5-5600 ECC Unbuffered DIMM (UDIMM) memory module organized as 2Rx8 with a CL46 CAS latency, supplied in a 288-pin DIMM form factor and operating at 1.1 V. Engineered on Micron's 16 Gb DDR5 die generation, the module delivers 5600 MT/s (PC5-44800) peak transfer rate while consuming the lower idle/active power envelope that defines the DDR5 standard versus DDR4. A DRAM module (sometimes called a memory module, DIMM, or SDRAM module) is a printed-circuit board that aggregates multiple DRAM devices into a single, addressable unit accessed through a parallel data bus. In the system hierarchy, a DIMM sits beneath the memory controller, above the individual DRAM die, and is governed by the JEDEC DDR5 standard for electrical, timing, and command-protocol compliance. UDIMM stands for Unbuffered DIMM, meaning the address and control signals from the host memory controller reach the DRAM devices directly without an intermediate register, trading some signal-integrity margin for lower latency and lower cost relative to RDIMM. Key features of the MTC20C2085S1EC56BR include on-module ECC for single-bit error correction and multi-bit error detection, integrated PMIC (power management IC) support that brings 5 V from the slot and generates all required DDR5 rails on-module, dual-rank organization (2R) that boosts per-channel capacity, and JEDEC-standard 1.1 V operation. The module is rated at DDR5-5600 PC5-44800 with a CL46 timing and 2Rx8 rank/x8-device configuration. Technically, the module aggregates multiple 16 Gb DDR5 devices to reach 32 GB, with on-board SPD/EEPROM storing the JEDEC Serial Presence Detect configuration so the host BIOS recognizes speed, timing, voltage, and organization at POST. The on-module PMIC handles voltage regulation, while the on-die ECC engine and ECC scrubbing protect against bit errors common in dense server-class workloads. Typical applications include edge-compute servers, low-VM-density virtualization hosts, SMB and branch-office servers, AMD EPYC Genoa / Threadripper PRO workstations (TRX50/WRX90 platforms), and Intel Xeon W-2500 entry workstations that specify ECC UDIMM. The module is also used in general-purpose entry servers and content-creation workstations where 32 GB of ECC-protected DDR5-5600 memory is appropriate. When designing with this module, confirm the host board's QVL (qualified vendor list) lists 32 GB 2Rx8 DDR5-5600 ECC UDIMM support, and ensure the memory controller supports 5600 MT/s (some platforms fall back to 4800 MT/s or 5200 MT/s when a faster module is populated). Mixing 2Rx8 and 1Rx8 modules in the same channel can force speed derating; identical rank organization per channel is recommended. This page synthesizes Micron's official product documentation, cross-brand third-party memory module offerings, and practical compatibility notes that are not consolidated in the manufacturer datasheet.

RFQ צור קשר