מוצרים (44,000+)

OPA350PA - 38MHz Low-Noise Rail-to-Rail Op Amp | Texas Instruments
OPA350PA

OPA350PA - 38MHz Low-Noise Rail-to-Rail Op Amp | Texas Instruments

Texas Instruments OPA350PA is a single-amplifier, high-speed CMOS operational amplifier optimized for low-voltage, single-supply operation, with 38 MHz gain-bandwidth product, 22 V/us slew rate, and 5 nV/sqrt(Hz) input noise in an 8-pin PDIP package. It supports rail-to-rail input and rail-to-rail output operation for compact, low-voltage signal-processing systems. A rail-to-rail operational amplifier is an amplifier whose useful input and output ranges extend close to the positive and negative supply rails. This input/output characteristic supports wider signal swing than a conventional amplifier whose linear input range is limited by internal biasing. In the system hierarchy, the OPA350PA belongs to the operational-amplifier class of analog and linear ICs used for buffering, amplification, filtering, and feedback control. The OPA350PA combines 38 MHz gain-bandwidth product with a 22 V/us slew rate, allowing it to process high-frequency signals without requiring a high-voltage supply. Its 5 nV/sqrt(Hz) input-noise specification is particularly useful when low-level signals must be amplified before conversion or measurement. Rail-to-rail output can swing within 10 mV of the relevant output limits under the operating conditions described by the manufacturer. These characteristics make the device suitable for sampling analog-to-digital converter inputs, cell-phone power-amplifier control loops, and other compact, bandwidth-sensitive analog circuits. The OPA350 series uses a CMOS operational-amplifier architecture optimized for single-supply operation over a 2.7 V to 5.5 V supply range. Its combination of wide bandwidth, high slew rate, and low noise provides more design flexibility than either a general-purpose slow amplifier or a high-speed amplifier with higher noise. Gain can be established with conventional external resistors, while signal conditioning is supported by the amplifier's low-noise input stage and broad output-driving capability. Typical uses include driving sampling analog-to-digital converters, closing cell-phone power-amplifier control loops, amplifying sensor signals, buffering high-impedance sources, and implementing active analog filters. The device is especially appropriate when the system operates from a single low-voltage rail and needs both input and output signal range close to the supply limits. When driving a converter, input settling and the converter's acquisition requirements should be checked together. The principal design consideration is power-supply decoupling. Place the supply-bypass capacitor close to the amplifier's power and ground pins, keep feedback components compact, and route high-frequency current in a short loop. Because a fast amplifier can expose poor grounding or long feedback paths, maintain a low-impedance return path and verify the completed circuit with an oscilloscope before relying on calculated phase margin. This page consolidates the manufacturer's functional description, package information, ordering identifiers, practical application guidance, and verified source links. It also distinguishes the electrically and mechanically suitable drop-in alternatives from parts that merely appear in general cross-reference results, helping engineers avoid a replacement that changes the PCB footprint or signal behavior.

RFQ צור קשר
OPA350UA - 38MHz High-Speed Rail-to-Rail Op Amp | TI
OPA350UA

OPA350UA - 38MHz High-Speed Rail-to-Rail Op Amp | TI

Texas Instruments OPA350UA is a single, rail-to-rail CMOS operational amplifier optimized for low-voltage, single-supply operation. It provides a 38 MHz gain-bandwidth product, 22 V/µs slew rate, and 5 nV/√Hz input-noise density in an 8-pin SOIC package. These characteristics place the OPA350UA in the operational-amplifier hierarchy of high-speed analog signal-conditioning ICs for low-voltage precision and signal-chain designs. An operational amplifier is an analog integrated circuit that provides high open-loop gain while processing a differential input signal. The OPA350 family adds rail-to-rail input and output capability, allowing signals to operate close to the supply rails. This rail-to-rail behavior makes it useful in battery-powered equipment, low-voltage sensor interfaces, audio paths, communication equipment, and control systems where conventional non-rail-to-rail amplifiers would clip or restrict headroom. Key features include 5 nV/√Hz noise density, 38 MHz gain-bandwidth product, and 22 V/µs slew rate. The amplifier operates from a 2.7 V to 5.5 V single supply, and its input common-mode range extends approximately 300 mV below ground and 300 mV above the positive supply. The CMOS implementation also supports low-voltage operation while preserving high-speed transient performance needed for ADC drive and active filtering. OPA350 series devices are optimized for driving sampling analog-to-digital converters, cell-phone power-amplifier control loops, and video-processing systems. The manufacturer identifies 75-ohm video-drive capability as an application area. Its combination of low noise, wide bandwidth, and rail-to-rail swing supports signal chains where both small-signal fidelity and large-signal linearity are important. Typical uses include low-voltage ADC input stages, precision current sensing, audio preamplification, active filters, and high-speed control loops. The 38 MHz bandwidth provides useful margin when filtering higher-frequency signals, while the low 5 nV/√Hz noise density helps preserve weak-signal integrity. Slew rate must be checked against the amplitude and bandwidth requirements of the largest intended output waveform. For layout, place input, feedback, and decoupling components close to their associated pins, and use a short, low-inductance ground return. Maintain a stable feedback network and avoid routing high-impedance input traces beside digital or switching-current paths. The low-voltage operating range does not eliminate the need for supply filtering, particularly when the amplifier is used immediately before a sampling ADC. This page combines manufacturer specifications, package and pin information, practical application guidance, and structured comparisons with pin-compatible operational-amplifier alternatives to support faster component selection and board-level implementation.

RFQ צור קשר
OPA353UA - 44 MHz RRIO Op Amp | Texas Instruments
OPA353UA

OPA353UA - 44 MHz RRIO Op Amp | Texas Instruments

The Texas Instruments OPA353UA is a single, high-speed, rail-to-rail input and output operational amplifier with a 5.5 V maximum supply, 44 MHz gain-bandwidth product, 7 nV/√Hz input noise, and 22 V/µs slew rate. It is packaged in an 8-pin SOIC for compact, surface-mount signal-conditioning and low-voltage analog systems. A rail-to-rail input and output operational amplifier, commonly called an RRIO amplifier, accepts input signals near the positive and negative supply rails while maintaining an output that approaches the available supply range. This makes the OPA353 suitable for low-voltage systems in which the useful signal can occupy much of the available analog headroom. It belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. The OPA353 combines a 44 MHz gain-bandwidth product with low input noise of 7 nV/√Hz and a slew rate of 22 V/µs. These characteristics support accurate amplification of small signals while also providing sufficient bandwidth for higher-speed instrumentation. Its rail-to-rail architecture simplifies buffering, level translation, and sensor-amplifier designs operated from a single low-voltage supply. This single-amplifier device is optimized for low-voltage, single-supply operation. When configured with a noise gain of 1 V/V, its closed-loop bandwidth reaches 44 MHz. The 7 nV/√Hz noise density makes the device relevant to low-level analog front ends, while the 22 V/µs slew rate helps preserve large-signal response during fast transitions. Typical applications include sampling analog-to-digital converter input drivers, low-noise signal conditioning, portable instrumentation, audio and communication interface circuits, and general-purpose rail-to-rail buffers. The 8-pin SOIC package supports conventional PCB assembly while keeping the device footprint compact. Designers should verify the input common-mode range, output swing, output-current capability, stability, and noise performance against the actual supply voltage and load. Decoupling and short feedback paths help preserve the intended bandwidth and reduce parasitic effects in high-gain layouts. This page organizes the OPA353UA technical characteristics, drop-in alternatives, application guidance, and design considerations into a practical engineering reference for evaluating the device in low-voltage precision and high-speed analog circuits.

RFQ צור קשר
OPA355UA - 200MHz CMOS Op Amp with Shutdown | Texas Instruments
OPA355UA

OPA355UA - 200MHz CMOS Op Amp with Shutdown | Texas Instruments

Texas Instruments OPA355UA is a single-circuit CMOS operational amplifier with a 2.5 V supply capability, 200 MHz gain-bandwidth product, rail-to-rail operation, and a shutdown function, packaged in an 8-pin SOIC. It is designed for video and other applications requiring wide bandwidth, while its high-speed architecture also allows it to serve precision signal-conditioning, filtering, and data-conversion interface duties. An operational amplifier is an active analog signal-processing component that amplifies the voltage difference between two inputs while using negative feedback to control gain, bandwidth, and output behavior. The OPA355 belongs to the CMOS operational-amplifier family and sits within the broader hierarchy of signal-chain ICs, analog ICs, and semiconductor devices. Its wide bandwidth makes it useful when signals must be amplified without severe attenuation, particularly in video, communications, instrumentation, and mixed-signal systems. The 200 MHz gain-bandwidth product is the amplifier's principal headline specification. For a closed-loop amplifier, this value indicates the approximate bandwidth available at unity gain and helps determine how quickly the circuit can respond to changing input signals. Unity-gain stability permits direct use as a buffer, while the rail-to-rail input and output characteristics broaden the usable signal range relative to fixed-headroom implementations. A dedicated shutdown connection can reduce power consumption when the amplifier is not needed. OPA355UA uses a voltage-feedback CMOS architecture intended for high-speed, low-voltage analog systems. As a voltage-feedback amplifier, its closed-loop response is governed by external feedback components, allowing the same device to implement inverting, non-inverting, summing, and filtering circuits. The manufacturer identifies the series as suitable for video and other wide-bandwidth applications and notes that the amplifier is unity-gain stable and capable of driving large output currents. Typical uses include video signal conditioning, high-speed analog filtering, test and measurement front ends, communications interfaces, ADC or DAC driver stages, and precision control loops. Its 2.5 V capability and compact 8-pin SOIC package are especially useful in portable equipment and mixed-signal designs where board area and power budget are constrained. The shutdown feature also supports systems that periodically disable unused analog channels. Circuit design must account for high-speed stability, output loading, input common-mode range, supply bypassing, and the behavior of the shutdown control. Place the bypass capacitor close to the supply pins, keep feedback-loop traces short, and provide a low-impedance reference return. When driving capacitive loads or driving a downstream converter, evaluate output stability and slew-rate requirements rather than relying only on gain-bandwidth product. This product overview combines the manufacturer identification, package information, public technical characteristics, sourcing context, and application-oriented engineering guidance. It also organizes replacement questions and design trade-offs so engineers can evaluate the OPA355UA against other high-speed single CMOS amplifiers before committing to a PCB design.

RFQ צור קשר
OPA364ID - 7 MHz Rail-to-Rail Op Amp | Texas Instruments
OPA364ID

OPA364ID - 7 MHz Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments OPA364ID is a single, low-voltage CMOS operational amplifier with a 1.8 V to 5.5 V supply range, 7 MHz gain-bandwidth product, and rail-to-rail input/output operation in an 8-pin SOIC package. Designed for precision signal conditioning, it accepts bipolar input signals on a single supply while maintaining high common-mode rejection, including a specified 90 dB CMRR. An operational amplifier is a voltage-gain building block that compares two input voltages and drives its output to represent their difference. The OPA364 belongs to the broader operational-amplifier hierarchy within analog signal-chain ICs, where it sits between sensors or input networks and downstream analog-to-digital converters, filters, buffers, and control circuitry. Its rail-to-rail input common-mode range and rail-to-rail output capability make it useful in systems whose signals approach the supply rails. Key features include a 7 MHz gain-bandwidth product, 1.8 V minimum single-supply operation, 5.5 V maximum supply voltage, 90 dB common-mode rejection, and rail-to-rail input and output stages. The CMOS input architecture supports low-voltage operation and is suited to battery-powered instrumentation. The manufacturer identifies sensor amplification and signal conditioning in battery-powered systems as principal applications. The OPA364 and OPA363 families provide excellent common-mode rejection without the crossover associated with traditional complementary input stages. This characteristic is particularly useful when driving analog-to-digital converters because it helps preserve differential linearity and total harmonic distortion performance. The output voltage swing is specified within 10 mV of the relevant supply rail under stated conditions. Typical uses include low-voltage sensor interfaces, portable measurement equipment, analog-to-digital converter input drivers, current and voltage signal conditioners, audio and communication paths, and low-voltage control loops. Because the device supports operation from 1.8 V, it is suitable for systems powered by a single lithium-cell battery or a low-voltage regulated rail. Design the bypass network so a small ceramic capacitor is placed close to each supply pin, and route the input and output tracks to minimize parasitic capacitance and pickup. Check the input common-mode and output-swing limits against the actual signal range at temperature, especially when the amplifier operates near either supply rail. Select gain so closed-loop bandwidth and output-voltage requirements remain consistent with the signal being conditioned. This product page combines the manufacturer device description, package and ordering information, verified distributor references, pin-level implementation guidance, and same-brand drop-in options to support faster component selection and PCB-level implementation.

RFQ צור קשר
OPA378AIDBV - Zero-Drift 900kHz RRIO Op Amp | TI
OPA378AIDBV

OPA378AIDBV - Zero-Drift 900kHz RRIO Op Amp | TI

The Texas Instruments OPA378AIDBV is a low-noise, 900 kHz, rail-to-rail input/output (RRIO), zero-drift precision operational amplifier in a 5-pin SOT-23 (DBV) package. It features 20 uV maximum input offset voltage, 0.1 uV/°C offset voltage drift, and 150 uA maximum quiescent current, with a gain bandwidth product of 900 kHz and a low input voltage noise density suitable for precision signal conditioning. A zero-drift operational amplifier (also called a chopper-stabilized or auto-calibrated amplifier) is a precision amplifier topology that uses internal switching and correction to continuously null its input offset voltage, eliminating the 1/f (flicker) noise and offset drift that limit DC accuracy in conventional CMOS or bipolar op amps. The OPA378 belongs to the broader family of operational amplifiers -> precision amplifiers -> amplifiers -> analog signal-chain ICs -> semiconductor devices. This category is critical whenever a circuit needs to amplify or buffer microvolt-level DC signals without drift across temperature. Key specifications include a 900 kHz gain bandwidth product (GBW), 2.5 V/us typical slew rate, RRIO operation from a 2.7 V to 5.5 V single supply, 150 uA maximum quiescent current, and an input bias current of 200 pA. The combination of low offset (20 uV), near-zero drift (0.1 uV/°C), low noise, and micropower consumption enables high DC accuracy in battery-powered and bridge-sensor applications without auto-zero cycle latency. Internally, the OPA378 uses a proprietary auto-calibration technique that continuously samples and corrects the input stage offset, achieving picoampere-level effective input bias drift over time and temperature. Rail-to-rail input and output stages allow the part to operate with signals that approach either supply rail, maximizing dynamic range in low-voltage single-supply systems. The 5-pin SOT-23 package is footprint-compatible with industry-standard SOT-23-5 single-channel op amps, supporting PCB-level drop-in replacement. Typical applications include precision strain-gauge and thermocouple signal conditioning, transducer excitation amplifiers, battery-powered sensor front-ends, medical instrumentation, handheld test equipment, and current-sense amplifiers. Designers select the OPA378 specifically when sub-100 uV DC error and sub-uV/°C drift are required in systems that cannot tolerate the noise and quiescent current of legacy precision op amps. When designing with this device, ensure the input common-mode range includes the expected signal excursion, since RRIO operation only guarantees linear behavior within the specified input voltage range. Use low-impedance drive sources or a series input resistor to attenuate switching transients from the chopper front-end, and add a small RC filter at the output if any residual clock feedthrough is unacceptable in the target application. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers an actionable reference for sourcing and second-sourcing decisions.

RFQ צור קשר
OPA37GP - 63MHz Ultra-Low-Noise Precision Op Amp | Texas Instruments
OPA37GP

OPA37GP - 63MHz Ultra-Low-Noise Precision Op Amp | Texas Instruments

The Texas Instruments OPA37GP is a single, decompensated precision operational amplifier with 4.5 nV/√Hz input noise, 100 µV offset, 63 MHz gain-bandwidth product, and 11.9 V/µs slew rate, supplied in an 8-pin PDIP package. It is designed for precision signal-processing systems that require low noise, low distortion, high speed, and accurate DC behavior. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs while using negative feedback to set closed-loop gain. Precision operational amplifiers add low offset, low bias current, and stable voltage-noise performance. The OPA37 belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and semiconductor. The OPA37GP combines a 63 MHz gain-bandwidth product with a decompensated architecture, allowing operation at higher closed-loop gains than a unity-gain-stable device. Its 4.5 nV/√Hz noise and 100 µV offset make it suitable for precision audio, instrumentation, sensor-interface, and low-level signal-chain applications. The 11.9 V/µs slew rate supports faster signal transitions while preserving low distortion. The device accepts dual supplies identified in the verified product data as approximately ±4 V to ±22 V, giving a broad operating range for laboratory, industrial, and communications equipment. The OPA37GP is specified for a -40 °C to 85 °C temperature range and is offered in the P package with 8 pins. The manufacturer describes the family as ultra-low-noise and precision, with laser-trimmed thin-film resistor technology cited in retrieved technical material. Typical uses include low-level audio amplification, precision measurement front ends, current-voltage conversion, active filters, and instrumentation signal conditioning. The amplifier is particularly appropriate when low noise and accurate DC performance matter more than minimum power consumption or minimum cost. When laying out an OPA37GP circuit, keep the feedback network and input connections short, preserve the required supply decoupling, and avoid placing long copper paths beside high-gain input nodes. Because this is a decompensated amplifier, verify the minimum stable closed-loop gain before substituting it into a unity-gain circuit. This page combines verified manufacturer and distributor information with practical selection guidance, application context, and replacement checks.

RFQ צור קשר
OPA37GU - 63MHz Ultra-Low-Noise Precision Op Amp | TI
OPA37GU

OPA37GU - 63MHz Ultra-Low-Noise Precision Op Amp | TI

The Texas Instruments OPA37GU is a single, decompensated precision operational amplifier with a 63 MHz gain-bandwidth product, 11.9 V/µs slew rate, and input-voltage noise density of 4.5 nV/√Hz at 1 kHz, housed in an 8-pin SOIC package. It is designed for precision signal-processing applications that require low noise, low offset, and accurate dynamic performance. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. Precision operational amplifiers add low offset, low bias current, high open-loop gain, and common-mode rejection for instrumentation, audio, sensor, and measurement systems. The OPA37 is a decompensated amplifier, so its stable operating-gain requirement must be considered when selecting feedback values. Key verified features include 4.5 nV/√Hz maximum input noise at 1 kHz, 100 µV maximum input offset voltage, 0.4 µV/°C offset drift, 117 dB minimum open-loop gain, 100 dB minimum common-mode rejection, and 94 dB minimum power-supply rejection. The supplied product information identifies a ±4 V to ±22 V supply range and a 59 A device-level rating in distributor search data, although the exact application limits should be confirmed against the manufacturer datasheet. OPA37 family devices use a decompensated architecture intended for higher closed-loop gain than a unity-gain-stable amplifier. The 63 MHz gain-bandwidth product and 11.9 V/µs slew rate support wideband small-signal and precision signal paths, while the low-noise specification is particularly relevant to audio and measurement front ends. Stable feedback-network design remains essential because decompensated amplifiers may require a minimum closed-loop gain. Typical applications include professional audio equipment, low-noise microphone preamplifiers, instrumentation amplifiers, precision measurement front ends, active filters, and signal-conditioning circuits. The 8-pin SOIC package supports conventional surface-mount PCB assembly, while its low offset and noise help reduce calibration burden when the signal source is close to the input noise floor. When laying out an OPA37GU circuit, place input, feedback, and decoupling components close to the relevant pins, maintain short ground-return paths, and verify the required minimum closed-loop gain. Use the manufacturer datasheet for complete electrical limits, compensation guidance, common-mode range, output-drive capability, and package drawings. This page combines verified source data with selection and design guidance intended to support engineering comparison rather than replace the datasheet.

RFQ צור קשר
OPA380AID - 90MHz Precision Transimpedance Amplifier | TI
OPA380AID

OPA380AID - 90MHz Precision Transimpedance Amplifier | TI

The Texas Instruments OPA380AID is a precision, high-speed transimpedance amplifier in an 8-pin SOIC (D) package, combining a 90MHz gain bandwidth product with extremely high DC precision for fast photodiode applications. It converts photodiode currents up to 1mA into voltage signals with transimpedance bandwidth exceeding 1MHz. A transimpedance amplifier (TIA) is a specialized current-to-voltage converter built on an operational amplifier with a feedback resistor, forming the analog front end of optical receivers, barcode scanners, and photodiode-based instruments. Within the signal-chain hierarchy, the TIA sits between the photodetector and the ADC or comparator, and its noise, bandwidth, and offset set the dynamic range of the whole optical link. Key features include 50pA maximum input bias current, 25uV maximum offset voltage, and 0.1uV/C maximum drift, giving 4 to 5 decades of dynamic range. The very low 1/f noise and excellent long-term Vos stability result from an internal auto-zero amplifier cascaded with a high-speed amplifier, rather than a traditional composite approach, improving overload recovery and settling time. The auto-zero plus high-speed composite architecture eliminates the usual precision-versus-speed trade-off: DC accuracy typical of chopper amplifiers is retained while delivering >1MHz transimpedance bandwidth. Quiescent current is 6.5mA per amplifier. Typical applications include high-speed photodiode receivers for optical communications, laser rangefinders and LiDAR receivers, barcode and medical CT scanner photodiode front ends, and precision optical power meters. For stable operation, keep the photodiode capacitance and feedback resistor within the datasheet stability region; a small feedback capacitor is usually required, and the output may need a pull-down resistor to include 0V in the output swing.

USD $1.85 צור קשר
OPA380AID - 90MHz Precision Transimpedance Amplifier | TI
OPA380AID

OPA380AID - 90MHz Precision Transimpedance Amplifier | TI

The Texas Instruments OPA380AID is a precision, high-speed transimpedance amplifier delivered in an 8-pin SOIC package. It combines a 90MHz gain bandwidth (GBW) with extremely high DC precision, providing transimpedance bandwidth above 1MHz for photodiode currents up to 1mA. A transimpedance amplifier (TIA) is a specialized operational amplifier circuit that converts a sensor current, most commonly from a photodiode, into a proportional output voltage. Within the signal-chain hierarchy, the TIA sits between the optical or current-output sensor and the ADC or comparator, and its bandwidth, input bias current, and offset voltage set the system's dynamic range. The OPA380 belongs to the wider family of precision amplifiers and analog front-end ICs in power management of optical receivers. Key features include a maximum input bias current of 50pA, a maximum offset voltage of 25uV with only 0.1uV/degC drift, and 4 to 5 decades of dynamic range. These specs allow direct interface with high-impedance photodiodes without external cancellation circuitry. Architecturally, the OPA380 results from an internal auto-zero amplifier combined with a high-speed amplifier. This composite topology delivers very low 1/f noise and excellent long-term VOS stability while TI's design improves overload recovery and settling time over a traditional discrete composite approach. Typical applications include high-speed photodiode receivers for optical data links, photodiode-based instrumentation such as spectrophotometers and lab photoreceivers, and barcode or LiDAR-style pulse detection where >1MHz transimpedance bandwidth matters. Design tip: the feedback resistor and photodiode capacitance set stability - use the datasheet's feedback capacitor guidance, and note the output swings to within millivolts of ground only on a single supply with load returned to a negative rail or virtual ground.

RFQ צור קשר
OPA388ID - 10 MHz Zero-Drift Precision Op Amp | Texas Instruments
OPA388ID

OPA388ID - 10 MHz Zero-Drift Precision Op Amp | Texas Instruments

The Texas Instruments OPA388ID is a single, 10 MHz, CMOS, zero-drift, zero-crossover, true rail-to-rail input/output precision operational amplifier in an 8-SOIC package. It combines a 0.25 µV offset with 0.005 µV/°C temperature drift, making it suitable for precision analog signal chains where dc accuracy and low-frequency noise are more important than wideband performance alone. A zero-drift operational amplifier is a precision amplifier architecture that continuously corrects its input offset voltage to reduce temperature-dependent drift. The OPA388 family combines this behavior with zero-crossover operation, low-noise performance, fast settling, and true rail-to-rail input and output capability. It belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor devices. The OPA388ID offers 10 MHz gain-bandwidth performance and true rail-to-rail operation at its input and output. Its 0.25 µV offset specification supports accurate sensing of low-level signals, while the 0.005 µV/°C drift specification improves stability across changing ambient temperatures. These characteristics make the device useful in precision measurement, current sensing, sensor interfaces, and buffered analog systems where conventional amplifiers can introduce significant low-frequency error. The CMOS implementation and zero-crossover architecture are intended to reduce distortion during input and output signal transitions. Rail-to-rail input operation permits the common-mode input range to extend close to the supply rails, while rail-to-rail output operation increases usable output swing. The result is a precision amplifier that can operate directly from low-voltage supplies without sacrificing input range or output headroom. Typical applications include precision bridge and strain-gauge signal conditioning, buffered sensor outputs, low-level current measurement, laboratory instrumentation, industrial measurement systems, and analog-to-digital converter input drivers. The OPA388 is especially useful when the signal of interest is small, slowly varying, or monitored over a broad temperature range and requires the amplifier's offset and drift characteristics rather than maximum bandwidth. When designing around the OPA388ID, evaluate the complete signal path rather than the amplifier alone. Sensor excitation, reference voltage, resistor-network tolerance, input bias current, source impedance, ADC input range, and thermal gradients all contribute to system error. Stable layout, careful grounding, appropriate bypass capacitance, and attention to leakage or thermoelectric effects are necessary to preserve the precision promised by the low-offset device. This page combines manufacturer specifications with package, sourcing, application, and design guidance for engineers evaluating the OPA388ID. It also distinguishes confirmed device characteristics from parameters that require the manufacturer datasheet or a current distributor quotation, helping support faster component selection and more reliable PCB design decisions.

RFQ צור קשר
OPA396 - 1MHz 24uA Precision RRIO Op Amp | Texas Instruments
OPA396

OPA396 - 1MHz 24uA Precision RRIO Op Amp | Texas Instruments

The Texas Instruments OPA396 is a single, micropower precision operational amplifier featuring rail-to-rail input and output (RRIO) operation. It combines a 1 MHz gain-bandwidth product with an ultra-low quiescent current of 23.5 uA (24 uA typ), packaged in the tiny SC-70-5 (DCK) surface-mount package for space-constrained portable designs. An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, and is a fundamental building block of analog signal conditioning used for amplification, filtering, and buffering. The OPA396 belongs to the precision op amp category, which prioritizes low offset voltage, low drift, and low input bias current. Within the amplifier hierarchy it is a micropower precision op amp, positioned between general-purpose op amps and ultra-low-power nanopower devices, and its RRIO capability maximizes dynamic range in low-voltage systems. Key differentiating specifications include an ultra-low input bias current of 10 fA (CMOS input stage), a maximum offset voltage of 100 uV, and a low offset drift of 1.2 uV/C over temperature. These parameters deliver high DC accuracy in sensor interfaces and transimpedance applications. The device operates from a 1.7 V to 5.5 V single supply and is specified from -40C to +125C, supporting both single-cell battery systems and industrial environments. Technically, the OPA396 uses a CMOS input stage responsible for its femtoampere-level bias current, and a class-AB rail-to-rail output stage providing solid drive at low supply current. Its high speed-to-power ratio (1 MHz bandwidth at 23.5 uA) is exceptional for battery-powered equipment, and unity-gain stability simplifies design-in. It is a member of the OPAx396 family, which includes single (OPA396), dual (OPA2396), and quad (OPA4396) versions for scalable designs. Typical applications include battery-powered instrumentation, photodiode transimpedance amplification where the 10 fA bias current minimizes dark-current error, portable medical devices, and low-power active filters. The rail-to-rail output swings fully at 1.7 V supplies, allowing direct interfacing with ADCs in IoT sensor nodes and wearable electronics. For design-in, decouple the supply with a 0.1 uF capacitor placed close to the supply pin, and account for the noise-gain versus bandwidth trade-off in high-gain configurations. Prices as of 2026-08-30 reflect distributor single-unit and volume pricing shown below.

RFQ צור קשר
OPA404KP - Quad Difet Op Amp 6.4MHz 35V/us | Texas Instruments
OPA404KP

OPA404KP - Quad Difet Op Amp 6.4MHz 35V/us | Texas Instruments

The Texas Instruments OPA404KP is a quad high-speed precision Difet operational amplifier delivering 6.4MHz bandwidth, 35V/us slew rate, and a maximum offset voltage of +/-750uV in a 14-pin PDIP package. Its input cascode architecture combines FET-class input bias current of +/-4pA maximum with uncompromised high-speed performance, making it one of the few quad precision amplifiers to merge these traits in a single DIP footprint. An operational amplifier (op amp) is a high-gain differential voltage amplifier used to perform analog signal conditioning tasks such as amplification, buffering, filtering, and integration. The OPA404 belongs to the precision amplifier hierarchy: operational amplifier -> precision JFET/Difet amplifier -> analog front-end IC. Quad devices integrate four matched amplifiers on one die, cutting board area and improving channel matching versus four single amplifiers. Key features include 6.4MHz gain-bandwidth, 35V/us slew rate, +/-4pA maximum input bias current, +/-750uV maximum offset voltage, and 0.01% settling performance. The Difet (dielectrically isolated FET) process yields input bias currents orders of magnitude below bipolar designs while retaining wideband dynamics, so the part serves both precision DC and fast AC signal paths simultaneously. The input cascode design maintains precision input specifications at high speed, unlike JFET parts such as the TL074 family, which trade precision for cost. Total supply voltage spans 10V to 36V, supporting +/-15V analog rails and single-supply operation from higher-voltage buses. The standard quad pinout allows direct upgrades of existing TL074/TL084 sockets to higher performance. Typical applications include data acquisition front ends, active filters, photodiode transimpedance amplifiers, and test instrumentation signal chains where four channels must share consistent precision characteristics. Design consideration: with 35V/us slew rate, layout and supply decoupling matter - place 0.1uF ceramic capacitors close to each supply pin, and watch output current limits when driving capacitive loads. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet, as of 2026-09-13.

RFQ צור קשר
OPA404KU - Quad 6.4MHz Precision Difet Op-Amp | Texas Instruments
OPA404KU

OPA404KU - Quad 6.4MHz Precision Difet Op-Amp | Texas Instruments

The Texas Instruments OPA404KU is a quad high-speed precision Difet (dielectrically-isolated FET) operational amplifier delivering 6.4 MHz bandwidth, 35 V/us slew rate, and a maximum input offset voltage of +/-750 uV, housed in a 16-pin SOIC package with the industry-standard quad op-amp pinout. A Difet operational amplifier is a precision op-amp built on dielectrically isolated FET process technology. Within the signal-chain hierarchy, the OPA404 belongs to the class of precision amplifiers: operational amplifier -> precision op-amp -> high-speed precision amplifier -> analog front-end IC. Unlike JFET-input op-amps fabricated on standard junction-isolated processes, Difet technology couples extremely low input bias current with wideband dynamics, a combination historically difficult to achieve in a single monolithic device. Key differentiating specifications include the 6.4 MHz wide bandwidth, 35 V/us high slew rate, +/-750 uV maximum offset voltage, +/-4 pA maximum input bias current, and 0.01% low settling time. This combination makes the device suitable when engineers need FET-input precision without sacrificing the speed of general-purpose high-speed amplifiers. Supply operation spans +/-5V to +/-18V (10 V to 36 V total), covering most analog instrumentation rails. Architecturally, the dielectrically isolated FET inputs contribute picoampere-level bias currents, which preserve accuracy when the amplifier is driven from high-impedance sources such as photodiodes, piezoelectric sensors, and high-value resistor networks. The standard quad pinout allows designers to drop the part into existing quad op-amp layouts originally designed around devices like the TL074 or TLC274, upgrading precision without PCB redesign. Typical applications include data acquisition front ends, precision integrators and active filters, photodiode transimpedance amplifiers, test and measurement instrumentation, and multi-channel audio or industrial signal processing where four matched channels in one package save board area and improve channel-to-channel matching. Design considerations: because input bias current is only a few picoamperes, use guard rings and clean board layout to prevent leakage paths from dominating the input error budget. Verify stability with capacitive loads and set gain appropriately for the 6.4 MHz bandwidth. This page synthesizes distributor pricing, verified alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet, providing a one-stop engineering reference for the OPA404KU.

RFQ צור קשר
OPA404KU/1K - Quad 6.4MHz Precision Difet Op Amp | TI
OPA404KU/1K

OPA404KU/1K - Quad 6.4MHz Precision Difet Op Amp | TI

The Texas Instruments OPA404KU/1K is a quad high-speed precision Difet (dielectrically-isolated FET) operational amplifier delivering 6.4 MHz bandwidth, 35 V/us slew rate, and +/-750 uV maximum offset voltage in a 16-pin SOIC (DW) package rated 0C to +70C. A precision operational amplifier is a differential-input, high-gain voltage amplifier built around a FET or bipolar input stage that minimizes DC error terms such as offset voltage and input bias current. Within the signal-chain hierarchy, op amps sit between sensors/ADCs and the wider analog front end, making their DC accuracy and dynamic performance critical to overall system precision. The Difet process uses dielectric isolation of the input FETs, which reduces input bias current far below what junction-isolated JFET processes achieve. Key features include an unusually low maximum input bias current of +/-4 pA, 0.01% settling to fast accuracy levels, unity-gain stability, and a standard quad op amp pinout that allows direct upgrading of existing designs. The combination of low bias current with wide bandwidth and fast slew rate in a single quad package is rare and eliminates matching multiple singles. Technically, the dielectrically isolated FET input stage keeps bias current low over temperature and input range, while the internal compensation guarantees stability down to unity gain without external capacitors. The standard quad pin configuration (outputs on pins 1, 7, 8, 14) preserves compatibility with legacy quad sockets. Typical applications include precision instrumentation, optoelectronics, sonar and ultrasound front ends, professional audio equipment, medical equipment, and detector arrays. Design consideration: as a quad device, ensure each amplifier channel has proper supply decoupling, and account for the 0C to +70C commercial operating range - the industrial-range variant OPA404KU/1KE4-grade equivalents should be evaluated for extended temperature designs. This page synthesizes distributor pricing, verified drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר
OPA404SG - Quad 6.4MHz Precision Difet Op Amp | Texas Instruments
OPA404SG

OPA404SG - Quad 6.4MHz Precision Difet Op Amp | Texas Instruments

The Texas Instruments OPA404SG is a quad high-speed precision Difet (dielectrically isolated FET) operational amplifier delivering 6.4 MHz bandwidth, 35 V/us slew rate, and a maximum input offset voltage of +/-750 uV in a 14-pin CDIP (ceramic dual-in-line) package. An operational amplifier is a high-gain differential voltage amplifier that forms the foundational building block of the analog signal chain, sitting within the broader hierarchy of linear amplifiers and amplifier ICs in power management and signal conditioning systems. Quad op amps integrate four independent amplifier channels on a single die, sharing supply pins while keeping inputs and outputs independent, which reduces board area and improves channel-to-channel matching in multi-channel analog designs. Key features of the OPA404 include a wide 6.4 MHz bandwidth, a fast 35 V/us slew rate, low input bias current of +/-4 pA max enabled by the Difet input cascode architecture, 0.01% settling to fast accuracy, and a standard quad op amp pin configuration that allows direct upgrading of existing designs. The Difet (dielectrically isolated FET) process eliminates the junction-isolation leakage and parasitic capacitance of conventional processes, combining precision input specifications with uncompromised high-speed performance. The input cascode design keeps the drain-source voltage of the input FETs constant, stabilizing input bias current over temperature and common-mode range while preserving bandwidth. The SG suffix denotes the military-grade temperature rating in a hermetic ceramic package, supporting extended-temperature operation where plastic packaging is unacceptable, such as defense and aerospace instrumentation. Typical applications include high-speed data acquisition front ends, active filters in test and measurement equipment, precision integrators, photodiode transimpedance amplifiers, and multichannel buffer stages in industrial instrumentation. The quad configuration is particularly efficient in filter topologies such as state-variable designs that require four amplifiers per channel set. Design consideration: although the 4 pA bias current permits very large feedback resistors, resistor values above approximately 10 megaohm should be evaluated against parasitic capacitance effects on stability; use short feedback traces and consider a small feedback capacitor. This page synthesizes distributor availability, drop-in alternative analysis, and practical design guidance beyond what the manufacturer datasheet provides.

RFQ צור קשר
OPA4137P - Quad 36V 1MHz FET Op Amp | Texas Instruments
OPA4137P

OPA4137P - Quad 36V 1MHz FET Op Amp | Texas Instruments

The Texas Instruments OPA4137P is a four-channel, J-FET-input operational amplifier with rail-to-rail input capability, a 1 MHz gain-bandwidth product, and a 3.5 V/µs slew rate, packaged in a 14-pin PDIP. It operates from ±2.25 V to ±18 V, giving the device a 36 V maximum total supply range for precision analog signal-chain designs that require low input bias current and broad supply-voltage flexibility. An operational amplifier is a high-gain differential amplifier used to amplify voltage differences while providing feedback-defined gain, filtering, buffering, or signal conditioning. The OPA4137 belongs to the FET-input operational-amplifier family within the broader analog IC and power-management signal-chain hierarchy. Its four amplifiers share a common package while providing independent channels for instrumentation, converters, and active filtering. The OPA4137P uses low-input-bias-current J-FET input stages, making it suitable for high-impedance sources that would load conventional bipolar transistor inputs. The series documentation identifies input bias current around 10 pA, quiescent current around 120 µA per channel, and open-loop gain around 145 dB for applicable family configurations. The 1 MHz gain-bandwidth product supports moderate-bandwidth precision applications rather than high-speed video or RF signal chains. Each channel combines low-noise J-FET inputs with a 3.5 V/µs slew rate. The family is intended for low-cost and miniature applications where low bias current, low quiescent current, and compact implementation are important. Because all four channels are integrated into one 14-pin PDIP, designers can reduce external interconnections in multi-channel filters, sensor front ends, and signal-conditioning boards. Typical applications include low-frequency precision filters, current-to-voltage conversion, audio and instrumentation signal conditioning, sensor amplification, and analog control loops. It is particularly appropriate when source impedances are high enough that input bias current could create an unacceptable DC error. It is less suitable for demanding high-speed, high-output-current, or unity-gain-stable high-voltage applications without careful review of the complete electrical characteristics. For PCB implementation, place each bypass capacitor close to the associated supply pins, keep feedback components close to their channel pins, and provide a quiet ground reference. Avoid long high-impedance traces because leakage, contamination, and parasitic capacitance can degrade the low-bias-current advantage. Confirm output swing, input common-mode range, noise, distortion, and stability against the actual gain and load before releasing the design. This page combines manufacturer specifications, package and pin information, sourcing guidance, verified cross-reference results, and practical design notes. It also identifies where an alternative requires explicit engineering review rather than assuming that a similar amplifier function guarantees a board-level drop-in replacement.

RFQ צור קשר
OPA4137U - Quad 36V 1MHz FET Op Amp | Texas Instruments
OPA4137U

OPA4137U - Quad 36V 1MHz FET Op Amp | Texas Instruments

Texas Instruments OPA4137U is a quad FET-input operational amplifier designed for low-cost instrumentation and precision signal-chain applications. The device supports a 36 V supply, operates with 1 MHz gain-bandwidth product, and provides four amplifiers in a 14-SOIC package. Its defining electrical characteristics include 5 pA low input bias current, 220 µA quiescent current per channel, and 94 dB open-loop gain. A FET-input operational amplifier is an analog signal-conditioning device that uses field-effect-transistor input stages to provide very low input bias current. Within the signal-chain hierarchy, the OPA4137U belongs to the operational amplifier, analog amplifier, and signal-conditioning IC categories. This low-bias architecture is particularly useful when the amplifier must measure weak currents or signals without loading the source appreciably. The OPA4137 family combines low-cost construction with precision-oriented performance. Its 5 pA input bias current reduces DC error when sensing high-impedance sources, while the 94 dB open-loop gain supports accurate closed-loop amplification. The 1 MHz gain-bandwidth product is suitable for general-purpose instrumentation operating below the amplifier's higher-frequency limits. A low quiescent current of 220 µA per channel also benefits compact and low-power systems. The quad configuration integrates four FET-input amplifiers into one package, reducing board area compared with four separate single or dual devices. The OPA4137U is supplied in the 14-SOIC package identified by Texas Instruments as suitable for surface-mount assembly. Its monolithic circuit architecture supports consistent operation across the four channels while providing common supply rails for compact analog front ends. Typical uses include precision current measurement, photodiode and sensor interfaces, laboratory instrumentation, audio signal conditioning, and low-frequency active filters. The very low bias current is especially advantageous for source impedances in the gigaohm range. The 1 MHz bandwidth also permits practical operation in audio-frequency and general signal-conditioning networks when appropriate feedback and stability components are selected. PCB design should preserve a low-impedance ground return and place compensation, feedback, and input components close to the relevant amplifier pins. Input bias-current error should be evaluated against source impedance, and unused channels should be configured according to the manufacturer datasheet rather than left floating. Supply bypassing should follow the datasheet guidance and place a ceramic capacitor close to the supply pins. This product page combines the Texas Instruments device description, ordering information, package details, and manufacturer datasheet with practical application guidance. It also distinguishes verified drop-in alternatives from related amplifier families, helping engineers make package, bandwidth, supply-voltage, and precision decisions before committing to a PCB revision.

RFQ צור קשר
OPA4140 - Quad 11MHz Low-Noise JFET Precision Op Amp | Texas Instruments
OPA4140

OPA4140 - Quad 11MHz Low-Noise JFET Precision Op Amp | Texas Instruments

The Texas Instruments OPA4140 is a quad-channel, 11-MHz, low-noise, high-precision JFET-input operational amplifier with rail-to-rail output swing, available in 14-pin SOIC and 14-pin TSSOP packages. It delivers 5.1 nV/√Hz input voltage noise density, 11 MHz gain-bandwidth product, and 20 V/µs slew rate while operating from a single supply of 4.5 V to 36 V or dual supplies of ±2.25 V to ±18 V. The JFET input stage provides 0.5 pA typical input bias current and ±1.5 µV/°C low offset drift, making it suitable for high-impedance sensor front-ends. An operational amplifier (op amp) is an active analog building block that amplifies the difference between two input voltages and drives the result through an output stage. The op-amp hierarchy sits within analog ICs, then linear ICs, then signal-conditioning and power-management ICs. JFET-input op amps form a sub-family that uses a junction field-effect transistor at the differential input pair, giving extremely low input bias current and high input impedance - critical for photodiode, pH-electrode, and high-impedance transducer front-ends that bipolar input stages cannot load correctly. Key features include 0.5 pA input bias current, 0.5 mV maximum input offset voltage (A-grade), unity-gain stability, output swing to within 50 mV of either rail at 10 kΩ load, and short-circuit protection (rated ±18 mA). The device operates across -40 °C to +125 °C and is unity-gain stable for purely resistive or moderate-capacitive loads, eliminating the need for external compensation. Architecturally, the OPA4140 combines a JFET input differential pair with a bipolar second stage and a rail-to-rail class AB output stage. This hybrid topology achieves the low bias current of JFET, the low noise and precision of bipolar, and the wide output swing that lets a single 5 V rail power ADC drivers and reference buffers without external level shifters. Typical applications include precision analog front-ends (weigh scales, strain gauges, temperature loggers), battery-powered instrumentation, photodiode transimpedance amplifiers, and active filters or integrators in test equipment. Designers choose the OPA4140 over bipolar alternatives when the source impedance exceeds 10 kΩ. When routing the PCB, place 0.1 µF ceramic bypass capacitors within 5 mm of each supply pin and keep input traces short to preserve the 5.1 nV/√Hz noise floor. Use a ground plane under the package to shield inputs from digital noise, and respect the input common-mode range that extends to the negative rail. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that complement the manufacturer datasheet.

RFQ צור קשר
OPA4140AID - Quad 11MHz 36V JFET Op Amp | Texas Instruments
OPA4140AID

OPA4140AID - Quad 11MHz 36V JFET Op Amp | Texas Instruments

The Texas Instruments OPA4140AID is a quad-channel, 11-MHz, low-noise, 36-V JFET precision operational amplifier with rail-to-rail output, housed in a 14-pin SOIC (D) package. It features 5.1 nV/√Hz input voltage noise density, 1 pA typical input bias current (JFET input stage), 20 V/µs slew rate, and operates from ±2.25 V to ±18 V dual supplies or 4.5 V to 36 V single supply. A JFET input operational amplifier is a precision analog building block that uses a junction field-effect transistor at its input stage instead of a bipolar transistor. This architecture delivers very low input bias current (picoampere range) and high input impedance, which is critical when amplifying signals from high-impedance sensors, photodiodes, or transducer bridges without loading the source. The OPAx140 family (single, dual, quad) extends this JFET topology into a low-power, low-noise, rail-to-rail-output design suited for modern single-supply precision instrumentation. Key differentiating features include 5.1 nV/√Hz voltage noise density, 11 MHz gain-bandwidth product, 20 V/µs slew rate, ±18 V (36 V) supply operation, true rail-to-rail output swing, low 1.8 mA per-channel quiescent current, and excellent DC precision with 5 µV typical offset voltage. The JFET input stage eliminates the high input bias currents seen in bipolar amplifiers, making the OPA4140 ideal for high-impedance sensor signal chains. Technically, the OPA4140 uses TI's proprietary JFET-input dielectrically-isolated process combined with a precision laser-trimmed input stage. The architecture provides unity-gain stability, integrated EMI/RFI rejection filtering, and shutdown-free always-on operation. Each channel draws a low 1.8 mA quiescent current, enabling multi-channel precision designs without thermal concerns in compact 14-SOIC layouts. Typical applications include precision instrumentation amplifiers, multi-channel data acquisition systems, medical and analytical instrumentation, high-impedance transducer front-ends, professional audio line drivers, active filters, and precision ATE reference buffers. The four channels in one package support dense PCB layouts for multi-sensor or multi-axis measurement systems. When designing with this device, route input traces as guarded differential pairs and use a solid ground plane to preserve the JFET input's high-impedance advantage. Add 100 nF ceramic bypass capacitors close to each supply pin to maintain PSRR and prevent oscillation under capacitive loads above 1 nF. This page synthesizes distributor pricing, drop-in quad-channel alternatives, and practical design notes for the OPA4140AID that are not collated in the manufacturer datasheet alone.

RFQ צור קשר
OPA4140AIPW - Quad 11MHz JFET Precision Op Amp | Texas Instruments
OPA4140AIPW

OPA4140AIPW - Quad 11MHz JFET Precision Op Amp | Texas Instruments

The Texas Instruments OPA4140AIPW is a quad-channel, 11-MHz, low-noise, 36-V JFET-input precision operational amplifier with rail-to-rail output, packaged in a 14-pin TSSOP (PW) bulk format. The OPAx140 family features 5.1 nV/√Hz voltage noise density, 1 µV/°C maximum offset drift, 120 µV maximum input offset voltage, and 10 pA maximum input bias current over the full operating temperature range. With a 20 V/µs slew rate and 11 MHz gain-bandwidth product, the device delivers high-speed precision for demanding signal-chain applications. A JFET-input operational amplifier is a class of analog amplifier that uses junction field-effect transistors at the input stage to deliver very high input impedance (giga-ohm range) and exceptionally low input bias current. JFET op amps sit within the broader hierarchy of operational amplifiers -> linear amplifiers -> analog ICs -> semiconductor devices. Compared to bipolar-input op amps, JFET inputs avoid the picoamp-to-nanoamp bias currents of BJT inputs and excel in high-impedance sensor interfaces, transimpedance amplifiers, and precision integrators. Key features include rail-to-rail swing that allows designers to maximize dynamic range on low-voltage single supplies (down to 4.5 V), an input common-mode range that includes the negative supply (V-), and a quiescent current of approximately 1.8 mA per channel. The combination of 5.1 nV/√Hz noise and 1 µV/°C drift positions this part as a premium choice for instrumentation where temperature stability and source-impedance robustness matter. Typical applications include precision analog front-ends for industrial sensors, audio preamplifiers and DAC output buffers, photodiode transimpedance stages, medical instrumentation signal conditioning, and active filters in test-and-measurement equipment. The 36-V absolute-maximum supply also permits ±18 V dual-rail designs in professional audio and industrial process control. When designing with the OPA4140AIPW, choose feedback resistors between 2 kΩ and 100 kΩ to minimize Johnson noise contribution and bias-current offset error. Use 0.1 µF ceramic bypass capacitors within 5 mm of each supply pin to suppress oscillation in high-gain configurations. This page synthesizes verified distributor pricing, drop-in same-package and cross-brand alternatives, and practical design guidance not available from any single distributor listing or datasheet abstract.

RFQ צור קשר
OPA4192IPW - 36V Quad Precision RRIO Op Amp | Texas Instruments
OPA4192IPW

OPA4192IPW - 36V Quad Precision RRIO Op Amp | Texas Instruments

The Texas Instruments OPA4192IPW is a 36V, low-noise, low-quiescent-current, rail-to-rail input/output (RRIO) precision operational amplifier with e-trim technology, supplied in a 14-pin TSSOP (PW) package. It belongs to the OPAx192 family (OPA192 single, OPA2192 dual, OPA4192 quad) and delivers 10 MHz unity-gain bandwidth, 20 V/µs slew rate, and ±5 µV typical input offset voltage in a quad-channel configuration. The device operates from 8V (4.5V single-supply equivalent) to 36V (single supply) or ±4V to ±18V (dual supplies). An operational amplifier (op amp) is a high-gain DC-coupled electronic voltage amplifier with differential inputs and a single-ended output that uses external feedback components to set transfer characteristics. Precision op amps form a sub-category optimized for low offset, low drift, low bias current, and low noise, and they sit within the broader hierarchy: operational amplifier -> analog amplifier -> linear IC -> power management & signal chain. The OPAx192 e-trim family improves offset and drift during final test, eliminating the need for the user to null the offset externally. Key differentiating specifications include 5.5 nV/√Hz input voltage noise density at 1 kHz, 1.8 mV maximum input offset voltage over temperature, 5 pA typical input bias current, 1 mA quiescent current per channel, and a robust 36V absolute-maximum supply rating. The RRIO topology swings within a few millivolts of both rails on input and output, simplifying single-supply designs and maximizing dynamic range when powering low-voltage ADCs from higher analog rails. The OPA4192 uses TI's e-trim trimming process combined with a CMOS input stage, providing low input bias current (5 pA typical) and low noise without the drawbacks of traditional JFET or bipolar input stages. Its MUX-friendly input architecture prevents input over-voltage back-flow to the supply when the input exceeds the rails, allowing the device to sit on the same signal bus as switched-capacitor multiplexers without interaction. Typical applications include precision analog input modules for industrial PLCs, multi-channel data acquisition front ends, instrumentation signal conditioning, active filters and buffers for test & measurement equipment, and transducer amplifiers for pressure, strain-gauge, and thermocouple sensors. The quad channel count is well suited for bridge-type sensors that need excitation buffering plus three instrument amplifiers per channel, or for four-channel analog input modules on factory-automation backplanes. Design considerations include adequate PCB thermal relief for 36V operation, input protection when the source impedance is high, and supply decoupling within 5 mm of each supply pin. The MUX-friendly input eliminates the need for additional series input resistors in many multiplexed applications, simplifying the BOM and reducing board area. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a typical DigiKey or Mouser product page, giving engineers a one-stop technical summary for the OPA4192IPW.

RFQ צור קשר
OPA4209AIPWR - Quad 2.2nV/rtHz 18MHz 36V Precision Op Amp | TI
OPA4209AIPWR

OPA4209AIPWR - Quad 2.2nV/rtHz 18MHz 36V Precision Op Amp | TI

The Texas Instruments OPA4209AIPWR is a quad-channel, 2.2 nV/√Hz, 18 MHz, precision, rail-to-rail output (RRO) operational amplifier supplied in a 14-pin TSSOP (PW) package, specified for operation from -40 °C to +125 °C. It supports supply voltages from 4.5 V to 36 V single-supply (or ±2.25 V to ±18 V dual-supply), delivering a maximum supply current of 2.5 mA per channel while achieving very low voltage noise density. The combination of low noise, wide bandwidth, low offset, and rail-to-rail output swing makes it ideal for high-resolution signal acquisition. An operational amplifier is a high-gain DC-coupled electronic voltage amplifier with differential inputs and a single-ended output, forming the fundamental building block of analog signal chains. Precision op amps in particular target low offset voltage, low input bias current, low noise, and high open-loop gain so they can amplify millivolt-level signals without adding meaningful error. The OPA4209 belongs to the precision low-noise op-amp family (precision op amp -> low-noise amplifier -> operational amplifier -> analog IC -> semiconductor), bridging sensor/transducer signal conditioning and downstream ADC drivers. Key features include 2.2 nV/√Hz input voltage noise density at 1 kHz, 18 MHz unity-gain bandwidth, 6.5 V/µs slew rate, 130 dB open-loop gain (AOL), 150 µV typical input offset voltage, and rail-to-rail output swing. The device is unity-gain stable and accepts capacitive loads up to 1 nF, simplifying its use as a buffer or transducer interface without external compensation. The TSSOP-14 surface-mount package has a thermal resistance (θJA) of approximately 130 °C/W, requiring attention to total dissipation in multi-channel operation at high ambient temperature. The OPA4209AIPWR uses TI's proprietary precision bipolar process with a trimmed input stage to deliver 130 dB AOL and low offset drift across the full -40 °C to +125 °C range. Its CMOS-compatible input bias current (~ 1 nA typical) simplifies interface to high-impedance sensors and photodiode front ends. The RRO architecture eliminates the need for negative rails in single-supply systems, maximizing dynamic range in low-voltage 5 V or 12 V designs. Typical applications include precision data acquisition front ends, 16-bit and 18-bit SAR ADC drivers, industrial process-control analog I/O, multi-channel sensor signal conditioning (strain gauge, RTD, thermocouple), medical instrumentation, test-and-measurement equipment, and active filters. The wide 36 V supply range also makes it suitable for ±15 V pro-audio and industrial automation boards. When designing with this amplifier, observe the input common-mode range which extends to the negative rail but stays approximately 1.5 V below the positive rail (it is not a true RRIO). For 5 V single-supply designs, this is usually not a problem; for 36 V designs, ensure VCM stays within the linear input range to avoid distortion. This page synthesizes distributor pricing, drop-in alternatives (including same-brand TSSOP-14 quads from the OPAx209 family and cross-brand equivalents), comparison parameters, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
OPA4374AIDR - Quad 6.5MHz RRIO Op Amp | Texas Instruments
OPA4374AIDR

OPA4374AIDR - Quad 6.5MHz RRIO Op Amp | Texas Instruments

The Texas Instruments OPA4374AIDR is a quad-channel, 5.5V, 6.5MHz, rail-to-rail input and output (RRIO) CMOS operational amplifier supplied in a 14-pin SOIC package, designed for low-power, low-cost precision signal conditioning across industrial, portable, and consumer systems. It delivers a 6.5 MHz gain-bandwidth product and 5 V/us slew rate while consuming only 585 uA of quiescent current per channel, giving designers a strong speed-to-power ratio in a small surface-mount footprint. An operational amplifier (op amp) is a high-gain differential DC-coupled amplifier that uses external feedback to set gain, bandwidth, and transfer characteristics; it is the foundational building block of analog signal chains. Quad op amps integrate four independent amplifiers into a single package, reducing board area and channel-to-channel matching error in multi-channel systems such as sensor arrays, audio front-ends, and active filters. The OPA4374 extends this topology into the CMOS process node, achieving rail-to-rail input and output swing on a single supply up to 5.5V, which maximizes dynamic range in low-voltage designs. Key specifications include a maximum input offset voltage of 5 mV, a low input bias current of 10 pA maximum, 6.5 MHz unity-gain bandwidth, 5 V/us slew rate, 585 uA per-channel quiescent current, and a CMOS input stage that extends 200 mV beyond both supply rails. The output swings to within 25 mV of either rail at moderate load, and the device operates from a single 2.7V to 5.5V supply, or +/-1.35V to +/-2.75V from split rails. The OPA4374AIDR is specified across the -40C to +125C industrial temperature range and is offered in a 14-pin SOIC (D) package with RoHS-compliant lead-free (Pb-free) matte-tin plating. Architecturally, the OPA4374 uses a CMOS input differential pair followed by a class-AB output stage that delivers ~30 mA of short-circuit output current and supports capacitive loads up to ~1 nF in unity-gain configurations. The RRIO topology uses complementary N- and P-channel input stages that combine in a summing node to extend the common-mode range beyond the rails, while the output stage uses charge-pump-free rail-sensing to maintain output swing close to both rails. EMI rejection is enhanced by the small input-stage capacitance and the wide GBW relative to typical industrial noise frequencies. Typical applications include multi-channel sensor signal conditioning, battery-powered instrumentation, active filters, transimpedance amplifiers for photodiodes, and low-side or high-side current sensing. Designers often choose the OPA4374 when four channels, low power, and rail-to-rail swing must coexist in a small industrial footprint. When designing with this device, verify that the input common-mode voltage stays within the specified 200 mV beyond-rail range and ensure the output stage sees a load no smaller than ~2 kOhm to preserve linearity, especially at the top end of the supply.

RFQ צור קשר