מוצרים (44,000+)

P5020NXN1QMB - QorIQ P5 2-Core 2.0GHz PowerPC e5500 MPU | NXP
P5020NXN1QMB

P5020NXN1QMB - QorIQ P5 2-Core 2.0GHz PowerPC e5500 MPU | NXP

The NXP P5020NXN1QMB is a dual-core 64-bit PowerPC e5500 microprocessor in NXP's QorIQ P5 family, operating at up to 2.0GHz and housed in a 1295-ball FCBGA package measuring 37.5 mm x 37.5 mm. It integrates two e5500 cores with dual-issue, out-of-order execution, hardware-based acceleration engines for pattern matching and packet processing, and a high-bandwidth memory subsystem supporting DDR3/DDR3L SDRAM with ECC. A microprocessor (MPU) is an integrated circuit that contains one or more central processing unit cores, cache hierarchies, memory controllers, and peripheral interfaces on a single die. Multicore MPUs such as the P5020 sit at the top of the embedded compute hierarchy: MPU -> application processor -> SoC -> IC -> semiconductor. The QorIQ P5 series targets mid-range networking and industrial workloads where deterministic per-core performance and integrated datapath accelerators outperform general-purpose CPUs. Key features include dual e5500 cores at up to 2.0GHz, integrated 256 KB of private L2 cache per core with a shared 512 KB platform cache, three 10-Gigabit Enhanced Ethernet MACs plus eight 1-Gigabit Ethernet MACs, two PCI Express Gen 2 controllers, two Serial RapidIO Gen 2 ports, and four TDM/FlexPWI serial interfaces for legacy telecom interconnect. The platform also integrates hardware acceleration for packet parsing, pattern matching, queue management, and cryptographic offload (SEC 4.0) at line rate. The e5500 core implements the Power Architecture 64-bit instruction set with Hypervisor and virtualization support, enabling secure partition isolation for multi-tenant edge workloads. A coherent SMP fabric links the dual cores to the DDR3/3L controller with ECC, supporting up to 32 GB of addressable memory at 1333 MT/s, and to the high-throughput I/O subsystem that drives multi-port networking line cards without external bridge chips. Typical applications include multi-service enterprise routers, LTE small-cell baseband controllers, industrial control plane processors, network-attached storage controllers, and aerospace/industrial SBCs requiring extended-temperature operation. The P5020NXN1QMB carries the NXN1 suffix indicating an extended-temperature range of -40C to +105C with no encryption subsystem enabled, suitable for ruggedized and defense-grade deployments. When designing with this part, plan the PCB for 37.5 mm BGA fanout with 1.0 mm ball pitch and provide a minimum 8-layer stack-up to route DDR3 byte lanes with matched impedance. Thermal dissipation at 2.0GHz dual-core full load can exceed 20W, requiring a heatsink plus chassis airflow; sustained peak load on the I/O fabric elevates junction temperature further. This page synthesizes distributor pricing, drop-in same-family P5020 variants, and practical design notes for FCBGA-1295 layout not found in isolation on any single manufacturer or distributor page.

RFQ צור קשר
P5020NXN1TNB - QorIQ P5 Dual-Core 2.0GHz e5500 SoC | NXP
P5020NXN1TNB

P5020NXN1TNB - QorIQ P5 Dual-Core 2.0GHz e5500 SoC | NXP

The NXP P5020NXN1TNB is a QorIQ P5 communications processor featuring dual Power Architecture e5500 cores running up to 2.0 GHz, packaged in a 1295-pin FCPBGA (37.5x37.5 mm) with extended temperature range (-40C to +105C) and no encryption enabled. The part is part of NXP's high-performance QorIQ networking SoC family and integrates DDR3/3L memory controllers, PCIe, Serial RapidIO (SRIO), and multiple Gigabit Ethernet interfaces alongside a hardware-acceleration engine for packet processing. A QorIQ communications processor is a multicore 64-bit system-on-chip (SoC) designed for embedded networking, industrial control, and storage applications. Within the broader taxonomy, the P5020 belongs to the QorIQ P5 family, which sits under the Power Architecture SoC lineage, which itself falls under microprocessors (MPU) and integrated circuits. The e5500 core inside the P5020 implements the Power Architecture Book E instruction set with 64-bit addressing and supports hardware virtualization, making the chip suitable for software-defined networking, control-plane aggregation, and intelligent edge devices. Key features include dual e5500 cores at up to 2.0 GHz, dual DDR3/DDR3L controllers with ECC supporting up to 64-bit data width, four 10 Gigabit Ethernet options via XAUI/SerDes lanes, eight lanes of PCI Express Gen 2.0, three Serial RapidIO interfaces, integrated security accelerator (disabled in the NXN1 part-number suffix), and a Data Path Acceleration Architecture (DPAA) for hardware-accelerated packet handling. The 1295-FCPBGA package exposes extensive SerDes and address/data pins while delivering a thermal envelope appropriate for industrial-temperature environments. The P5020NXN1TNB leverages a 45 nm process and an SoC architecture that combines high-performance SMP cores with on-chip networking and acceleration hardware. The DPAA engine offloads queue management, scheduling, and buffer allocation, freeing the cores for control-plane tasks. The SerDes complex supports multi-protocol configuration through protocol-aware lanes, simplifying board layout when designers must choose between Ethernet, PCIe, and SRIO topologies at different points on the same platform. Typical applications include industrial routers and gateways, factory-floor control processors, LTE/WiMAX base-station control cards, military and aerospace networking, secure embedded appliances, and high-end printer controllers. The wide industrial temperature range and robust I/O make the P5020NXN1TNB a strong fit for harsh-environment deployments where general-purpose CPUs lack integrated networking. When designing with this part, plan thermal management around the 1295-BGA package from the start: the BGA requires a substrate with controlled-impedance routing, buried vias, and a heatsink for continuous 2.0 GHz dual-core operation. Boot sequencing relies on the PORESET, HRESET, and RESET pins driven by the platform CPLD, and the DDR3 controller requires calibrated fly-by topology to meet timing at 1333 MT/s.

RFQ צור קשר
P5020NXN1TNB557 - QorIQ P5020 Dual-Core 64-bit Power SoC | NXP
P5020NXN1TNB557

P5020NXN1TNB557 - QorIQ P5020 Dual-Core 64-bit Power SoC | NXP

The NXP P5020NXN1TNB557 is a member of the QorIQ P5020 communications processor family, integrating dual 64-bit Power Architecture e5500 cores running at up to 2.0 GHz with 512 KB of L2 cache per core, a 2 MB shared L3 cache, and high-speed SerDes lanes for networking and storage interconnect. Housed in a 1295-pin FC-PBGA package with -40C to +105C industrial temperature grade, this part targets demanding wired and wireless infrastructure, enterprise switching, and industrial control workloads that require deterministic throughput on multi-gigabit links. The QorIQ P5020 belongs to the broader Power Architecture (PowerPC) SoC hypernym hierarchy: QorIQ communications processor -> multi-core communications SoC -> application processor -> integrated circuit (IC) -> semiconductor. Originally developed by Freescale Semiconductor (acquired by NXP in 2015), the QorIQ family competes with Intel x86 networking SoCs and ARM-based network processors in routers, switches, base stations, and storage controllers. Its DataPath Acceleration Architecture (DPAA) provides hardware-accelerated packet classification, queueing, and crypto, enabling line-rate forwarding at 10 Gbps and beyond while leaving CPU cycles available for control-plane software. Key features include dual e5500 cores at 2.0 GHz with hardware virtualization, integrated DDR3/DDR3L memory controller with ECC support, multiple 10 Gigabit Ethernet controllers, PCI Express Gen 2/3 controllers, Serial RapidIO, and hardware-accelerated cryptography (SEC 5.x) for IPsec, SSL/TLS, and bulk encryption. The SoC also integrates two 4-lane SerDes banks supporting a mix of SGMII, XAUI, KR, and PCIe physical interfaces, plus a 32-bit local bus, I2C, SPI, DUART, and GPIO for board-level connectivity. Typical applications include multi-service routers, enterprise Layer 2/3 switches, LTE and 5G base-station baseband cards, network-attached storage (NAS) controllers, industrial gateways, and defense/aerospace embedded computing. The P5020NXN1TNB557 with industrial temperature rating is particularly suited to outdoor telecom cabinets, factory-floor control, and ruggedized military platforms. When designing with this device, allocate a 12-layer or better PCB stack-up with matched-length impedance for 10 GbE and PCIe lanes, and provide a clean 1.0V core rail with bulk decoupling at the SoC's PD pads. The boot ROM supports eSPI and NAND flash boot; plan the RCW (reset configuration word) source carefully because field re-configuration requires hardware rework. Boot validation via CodeWarrior or U-Boot is recommended before integrating DPAA-based drivers. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical layout notes not found in the manufacturer datasheet alone.

RFQ צור קשר
P5020NXN7QMB557 - QorIQ P5 2-Core 2.0GHz SoC | NXP
P5020NXN7QMB557

P5020NXN7QMB557 - QorIQ P5 2-Core 2.0GHz SoC | NXP

The NXP P5020NXN7QMB557 is a 64-bit Power Architecture system-on-chip from the QorIQ P5 communications processor family, integrating two e5500 cores running up to 2.0 GHz in a 1295-pin FCPBGA package (37.5 x 37.5 mm). It is a higher-speed bin of the P5020NXN7QMB variant, sharing the same QorIQ P5 silicon and pin-compatible FCPBGA-1295 footprint. What is a QorIQ communications processor? QorIQ is NXP's family of high-performance multicore communications processors, positioned in the broader hierarchy: SoC -> communications processor -> multicore processor -> embedded microprocessor. These devices integrate CPU cores, memory controllers, packet-processing accelerators, and high-speed serial interfaces (SerDes) on a single die, replacing legacy discrete networking designs and targeting routers, switches, base stations, and industrial control equipment. The P5020NXN7QMB557 is characterized by 64-bit Power Architecture e5500 cores with dual-thread capability, hardware offload engines for pattern matching, encryption, and packet processing, and a DDR3/3L memory controller with ECC support. The integrated SerDes provides flexible interface configuration for PCIe, Serial RapidIO (SRIO), and 10 Gigabit Ethernet (10GbE/XAUI), enabling system designs without external PHY silicon in many configurations. Operating temperature range spans -40C to +105C, satisfying industrial and extended-temperature networking requirements. Architecturally, the P5020 SoC uses a coherent fabric interconnect between cores, accelerators, and I/O blocks. This design reduces memory latency for packet-processing workloads where throughput per watt determines system competitiveness. The device integrates a hardware data-path acceleration architecture that offloads common packet inspection, queue management, and cryptographic operations, freeing CPU cycles for control-plane and exception handling. Typical applications include industrial networking routers, LTE small-cell base stations, network-attached storage (NAS) controllers, industrial IoT gateways, and secure communication appliances. The combination of high single-thread performance, hardware encryption, and wide I/O flexibility makes the P5 platform well suited for line-rate packet processing in mid-range networking equipment. Design consideration: ensure the 1295-ball FCPBGA lands are routed with matched-length SerDes traces per the NXP hardware design checklist, and that the DDR3 interface uses fly-by topology with proper VTT termination. The high core count and 2.0 GHz operation require a multilayer PCB with at least eight layers for signal-integrity-compliant routing. This page synthesizes distributor pricing, parametric data, and design notes not found in any single source, including cost-optimized recommendations for the P5 family and cross-references to adjacent QorIQ platforms.

RFQ צור קשר
P5021NSE72QC - QorIQ P5 Dual-Core 2.2GHz SoC | NXP
P5021NSE72QC

P5021NSE72QC - QorIQ P5 Dual-Core 2.2GHz SoC | NXP

The NXP P5021NSE72QC is a 64-bit dual-core PowerPC e5500 microprocessor from the QorIQ P5 family, integrating two cores running at up to 2.2 GHz in a 1295-ball FCBGA (37.5x37.5 mm) package. It supports DDR3/DDR3L with ECC memory, PCIe Gen2/Gen3 lanes, dual 10 Gigabit Ethernet MACs plus multiple 1 GbE ports, SATA 2.0, USB 2.0, and on-chip security (SEC) acceleration. The device is specified for the commercial 0°C to 90°C operating range and is rated at Silicon Rev 2.1. Background: A SoC (System-on-Chip) microprocessor integrates CPU cores, memory controllers, I/O peripherals, and security engines into a single silicon device, reducing board area and BOM versus a chipset approach. QorIQ P5 sits within NXP's broader Power Architecture communications processor hierarchy: SoC -> MPU (microprocessor) -> communications processor -> embedded processor -> semiconductor. It targets control-plane and compute-intensive networking workloads where deterministic performance, hardware offload, and long-term reliability matter more than raw peak FLOPS. Key features include: two 64-bit e5500 cores at up to 2.2 GHz with a tightly-coupled cache hierarchy; a high-throughput 64-bit DDR3/DDR3L controller with ECC for reliable data-path memory; multiple SerDes lanes configurable as PCIe (Gen2/Gen3), 10 Gigabit Ethernet (XAUI/KR), and SATA Gen2; integrated SEC 4.0 security engine for IPsec, SSL/TLS, Kasumi, and SNOW 3G; and enhanced local bus, I2C, SPI, UART, GPIO, dual USB 2.0, and SD/MMC interfaces. The P5021 silicon (Rev 2.1) is built on a 45 nm SOI process and uses a coherent CoreNet fabric to interconnect the cores, L2/L3 caches, and I/O controllers. Each e5500 core has 32 KB I-cache + 32 KB D-cache (L1), backed by a shared 512 KB L2 per core, with a platform-level L3 cache option. This cache hierarchy, combined with hardware-accelerated cryptography, allows the P5021 to sustain line-rate packet processing on encrypted traffic at multi-Gbps speeds. Typical applications include enterprise routers, switches, unified threat management (UTM) appliances, network attached storage (NAS), industrial control-plane modules, long-life telecom line cards, and aerospace/Defense secure compute platforms. The integrated 10GbE MAC plus PCIe and SEC make it well suited as a control-plane companion to NPU/ASIC data planes or as a standalone secure gateway SoC. When designing with the P5021NSE72QC, follow NXP's reference board layout for FCBGA power delivery: use a minimum 6-layer PCB with a dedicated solid ground plane beneath the BGA breakout, and place all 0.1 µF + bulk decoupling within 5 mm of the respective supply pins. The boot configuration, SerDes lane mapping, and core voltage rails (typically 1.0 V VDD, 1.5 V/1.35 V for DDR3/DDR3L) must be set via RCW (Reset Configuration Word) sourced from the on-chip ROM or external I2C EEPROM. This page synthesizes distributor pricing, drop-in alternatives (focused on the same QorIQ P5 FCBGA family), and practical thermal/decoupling guidance beyond the manufacturer datasheet excerpt, with every parameter aligned to the data retrieved as of 2026-10-17.

RFQ צור קשר
P5021NXE7TMC - QorIQ Dual-Core 1.8GHz SoC | NXP Semiconductors
P5021NXE7TMC

P5021NXE7TMC - QorIQ Dual-Core 1.8GHz SoC | NXP Semiconductors

The NXP QorIQ P5021NXE7TMC is a 64-bit dual-core Power Architecture system-on-chip (SoC) that integrates two e5500 cores running at up to 1.8 GHz, a tightly-coupled cache hierarchy, hardware-accelerated data paths, and a rich set of networking and peripheral interfaces for embedded compute-intensive applications. It ships in a 1295-pin FCPBGA package (37.5 x 37.5 mm) rated for the industrial extended temperature range of -40C to +105C and targets networking, telecom/datacom, wireless infrastructure, and aerospace/military designs. A QorIQ P5 family device is a 64-bit Power Architecture (formerly PowerPC) communications processor that combines general-purpose cores with integrated networking peripherals (Ethernet, PCIe, SATA, USB, SerDes) and a hardware security engine. The P5 family sits in NXP's broader QorIQ communications processor hierarchy between the entry-level P1/P3 families and the high-end P4080/T series. The dual-core P5021 occupies a middle position in this family, sharing software and pinout compatibility with the quad-core P5040, the single-core P5010, and the dual-core P5020, allowing a single PCB to scale from one to four cores simply by swapping the BGA. Key features of the P5021NXE7TMC include dual e5500 cores at 1.8 GHz, support for DDR3 / DDR3L memory with ECC, integrated 1/10 Gigabit Ethernet MACs, multiple PCI Express Gen2 controllers, SATA 2.0, USB 2.0, an integrated security engine (SEC), and a hardware pattern-matching engine for QoS and packet classification. The 1.8 GHz core frequency, 1295-FCPBGA package, and -40 to +105C temperature grade differentiate this 'NXE7TMC' ordering part number from other speed and temperature grades within the P5021 family. Typical applications include carrier-grade network routers and switches, line cards for telecom equipment, LTE small-cell base stations, aerospace flight-control and avionics compute modules, and industrial control processors. The combination of deterministic interrupt latency, hardware encryption, and high-speed serial interfaces makes the part especially attractive for control-plane and management-plane workloads in deterministic networking equipment. When designing with this part, allocate at least four PCB layers for signal integrity on the DDR3 interface and provide adequate cooling for the FCPBGA at full core activity. Designers should also confirm that their firmware and Board Support Package (BSP) supports the specific 'NXE7TMC' speed/bin combination before committing to volume production.

RFQ צור קשר
P5040NSE72QC - QorIQ P5 4-Core 2.2GHz SoC | NXP | Networking
P5040NSE72QC

P5040NSE72QC - QorIQ P5 4-Core 2.2GHz SoC | NXP | Networking

The NXP P5040NSE72QC is a QorIQ P5 series communications processor SoC integrating four single-threaded e5500 cores built on Power Architecture v2.06 technology, clocked up to 2.2 GHz, in a 1295-ball FCBGA (37.5 mm x 37.5 mm) package. The device targets high-performance networking applications such as control plane processing, service routers, and enterprise switching platforms. A communications SoC (System-on-Chip) is a highly-integrated processor that combines CPU cores, memory controllers, high-speed serial interfaces, and platform peripherals on a single die. Within the broader taxonomy, the P5040 belongs to: microprocessor -> multicore SoC -> networking SoC -> embedded communications processor -> semiconductor. The e5500 core implements the Power Architecture v2.06 64-bit ISA with hardware hypervisor support and three levels of instruction privilege (user, supervisor, hypervisor), enabling workload isolation in virtualized network functions. Key features of the P5040NSE72QC include 4 e5500 cores at 2.2 GHz, integrated DDR3/DDR3L controller with ECC support up to DDR3-2133, multiple PCIe controllers, 1/10 Gigabit Ethernet MACs, SATA interfaces, and a SEC (Security Engine) for cryptographic offload. The device supports up to ten 1 GbE ports or combinations of 1G/10G, plus a 64-bit DDR3/3L memory interface with ECC. Operating temperature range is 0C to 90C, suitable for commercial and industrial networking environments with controlled airflow. The P5040 architecture uses a hierarchical interconnect with CoreNet coherency fabric linking cores, memory controller, and platform blocks. This allows snoop-based cache coherence across the four cores and deterministic memory access latency, which is critical for packet processing workloads. The SEC 5.x block accelerates AES, 3DES, SHA, RSA, and ECC operations, offloading IPsec and TLS tunnels from the cores. Typical applications include service provider routers, multi-service gateways, enterprise access switches, wireless base station controllers, and network-attached storage (NAS) controllers. The combination of high core count, integrated 10G Ethernet, and on-chip SEC makes the P5040NSE72QC particularly well-suited for line-rate control-plane and security processing at line rates up to multi-10G. When designing with the P5040, ensure the FCBGA thermal solution is rated for the 0-90C junction range, route all high-speed SerDes lanes with reference-impedance-controlled PCB stackups (100 ohm differential for 10G, 85 ohm for PCIe), and validate DDR3/3L fly-by topology against the JEDEC specifications referenced in the device errata. This page synthesizes NXP product-page specifications, distributor pricing from DigiKey/Mouser/Octopart, and engineering cross-reference data not found in any single source. It is intended as a decision-support companion to the NXP QorIQ P5040 hardware reference manual.

RFQ צור קשר
P5040NSN12QB - QorIQ P5 4-Core 2.2GHz SoC | NXP Semiconductors
P5040NSN12QB

P5040NSN12QB - QorIQ P5 4-Core 2.2GHz SoC | NXP Semiconductors

The NXP Semiconductors (formerly Freescale) P5040NSN12QB is a quad-core 64-bit QorIQ P5 communications SoC delivering up to 2.2 GHz per core, packaged in a 1295-ball HBGA and qualified over the 0C to 105C industrial temperature range. The device integrates four e5500 Power Architecture cores with a tightly coupled cache hierarchy (512 KB L2 per core with ECC), hardware-accelerated packet processing, and a high-speed I/O subsystem including DDR3/3L controllers, multiple PCIe Gen2 controllers, 1/10 GbE interfaces, SATA, and USB. A QorIQ communications processor is a system-on-chip (SoC) designed for high-performance networking and embedded infrastructure. QorIQ belongs to the broader category of microprocessors -> application processors -> communications SoCs. The P5 family is engineered for power-efficient multi-core processing, supporting both single-, dual-, and quad-core scaling to address workloads ranging from mid-range branch routers to high-end control-plane aggregation. This SoC class is foundational for routers, switches, wireless base stations, and aerospace/defense systems where deterministic throughput and protocol offload matter. Key specifications include four e5500 cores at up to 2.2 GHz, 512 KB L2 cache per core with ECC, a 64-bit DDR3/3L memory controller with ECC, integrated 10 Gigabit Ethernet MACs, PCIe Gen2 controllers, SATA 2.0, USB 2.0, and secure boot. The 1295-ball HBGA package offers robust thermal dissipation for sustained performance under fanless or limited-cooling chassis. Operating temperature range of 0C to 105C supports industrial and extended-temperature deployments. Architecturally, the P5040 implements the e5500 core with out-of-order execution, hardware virtualization support, and dedicated datapath engines. The integrated Data Path Acceleration Architecture (DPAA) offloads packet classification, queue management, and cryptographic operations, freeing the cores for control-plane workloads. The combination of multi-core throughput and integrated I/O reduces system BOM cost by eliminating companion chipsets. Typical applications include enterprise and carrier-grade routers, LTE/4G wireless base stations, network-attached storage (NAS) controllers, IP-PBX platforms, and aerospace/defense embedded computing. It is also used in industrial control systems and security appliances where deterministic multi-core performance is required. When designing with the P5040NSN12QB, allocate ample PCB area for the 1295-ball HBGA land pattern, use controlled-impedance routing for high-speed serial links (10 GbE, PCIe, SATA), and provide adequate power decoupling per NXP hardware design guidelines. Reference the NXP QorIQ P5040 reference design (Rev 2.0) for schematic, layout, and thermal recommendations. This page synthesizes distributor pricing, drop-in compatible QorIQ alternatives, and practical design considerations not found in the standalone datasheet, including cross-reference guidance for engineering teams evaluating platform migrations.

RFQ צור קשר
P5040NSN72QC - QorIQ P5 64-Bit SoC, 4x 2.2GHz | NXP
P5040NSN72QC

P5040NSN72QC - QorIQ P5 64-Bit SoC, 4x 2.2GHz | NXP

The NXP QorIQ P5040NSN72QC is a quad-core 64-bit Power Architecture system-on-chip (SoC) from the QorIQ P5 family, integrating four e5500 cores running at up to 2.2 GHz, packaged in a 1295-ball FCBGA (FC-PBGA, 37.5 mm x 37.5 mm) and rated for an extended 0 to +105 C operating temperature range. According to the NXP product brief, the part delivers scalable 64-bit processing with single-, dual-, and quad-core devices, with a tightly coupled cache hierarchy engineered for low latency and integrated hardware acceleration blocks that offload networking and datapath workloads from the cores. A system-on-chip (SoC) integrates the CPU cores, memory controller, high-speed I/O controllers, and platform glue logic into a single device, replacing what previously required a CPU plus chipset plus multiple peripheral controllers. The QorIQ P5 line specifically targets compute-intensive but power-conscious control-plane applications in networking, telecom, and industrial equipment where deterministic performance and a rich I/O mix matter more than raw single-thread throughput. In NXP's portfolio, P5040 (quad-core) and P5021 (dual-core) sit at the top of the P5 family tree, which itself sits under the broader QorIQ communications-processor platform. Key features include four 64-bit e5500 cores at up to 2.2 GHz, integrated DDR3 / DDR3L memory controller with ECC support, integrated PCIe Gen2 controllers, integrated multi-gigabit Ethernet supporting 1 GbE and 10 GbE, integrated SATA controllers, hardware accelerators for cryptography, pattern matching, and packet processing, and a high-bandwidth CoreNet coherency fabric interconnecting cores, caches, and I/O. The extended 0 to +105 C junction range allows deployment in thermally constrained networking enclosures where ambient temperatures rise under load, and the FCBGA-1295 package exposes all SerDes lanes and I/O signals for maximum board-level flexibility. Architecturally, the device uses out-of-order e5500 cores backed by a private L1 cache and a shared L2/L3 platform cache, with memory and I/O coherency maintained by the CoreNet fabric. Hardware offload engines reduce CPU interrupt load and lower per-packet latency, which is essential for line-rate forwarding, encryption, and QoS scheduling in carrier-grade networking gear. Compared with discrete CPU-plus-NPU designs, the integrated approach reduces board area, BOM cost, and power consumption while improving determinism. Typical applications include enterprise and service-provider routers, switches, and network appliances, line cards for modular switches, telecom base-station controllers, industrial control and automation equipment, secure gateways, and networked storage controllers. The combination of PCIe, SATA, and multi-speed Ethernet makes it a single-chip solution for many control-plane aggregation roles. Engineers should pay close attention to power-rail sequencing and SerDes reference-clock design - the NXP hardware-design checklist describes the supported bring-up sequence and reference-clock topology required to bring all high-speed interfaces online reliably. This page aggregates distributor pricing, lifecycle information, drop-in alternatives, and design notes that supplement the manufacturer datasheet.

RFQ צור קשר
P5040NXE1TMB - QorIQ P5040 4-Core 1.8GHz Power Arch SoC | NXP
P5040NXE1TMB

P5040NXE1TMB - QorIQ P5040 4-Core 1.8GHz Power Arch SoC | NXP

The NXP (formerly Freescale) P5040NXE1TMB is a QorIQ P5040 communications processor SoC integrating four Power Architecture e5500 cores at 1.8 GHz with a 64-bit datapath, DDR3/3L memory controller with ECC, and a high-speed SerDes fabric supporting PCIe, 1/10 Gigabit Ethernet, and SATA in a 1295-ball FCBGA measuring 37.5 mm x 37.5 mm. The part is rated for the extended industrial temperature range of -40 C to +105 C and is targeted at networking, telecom, and industrial embedded applications. A QorIQ SoC is a system-on-chip that combines one or more Power Architecture CPU cores with integrated networking and I/O peripherals. Within the broader taxonomy, the P5040 sits under communications processor -> embedded microprocessor -> microprocessor (MPU) -> integrated circuit -> semiconductor. By integrating the CPU complex, memory controller, packet-processing engines, and SerDes on a single die, the QorIQ family reduces bill-of-materials cost and PCB area compared with multi-chip designs built around a generic CPU plus external PHYs and bridges. Key features include quad-core e5500 cores running up to 1.8 GHz, a 64-bit DDR3/DDR3L controller with ECC supporting up to 2133 MT/s, integrated 10 GbE and 1 GbE MACs, multiple PCIe Gen2 controllers, SATA 2.0 interfaces, a security engine (SEC), and hardware packet acceleration. The cache hierarchy pairs each core with a private L2 and a shared L3 cache for low-latency memory access. The 1.0 V to 1.1 V core supply is supplemented by independent rails for the DDR I/O and SerDes, allowing flexible power sequencing. The architecture uses an interconnect fabric that fans the four cores out to the coherent memory subsystem and to the I/O controllers. This topology is what allows the device to deliver multi-Gb/s packet throughput while running control-plane software stacks such as Linux, VxWorks, or QNX. The on-chip SEC engine accelerates IPsec, SSL/TLS, and bulk crypto, offloading security workloads from the CPU cores. Typical applications include multi-service routers, LTE and small-cell base stations, network-attached storage controllers, industrial gateways, and aerospace/defense communications platforms. Engineers select the P5040 when deterministic multi-core performance, integrated 10 GbE, and long-lifecycle supply matter more than absolute single-thread performance. Key trade-off: the 1295-ball FCBGA requires multi-layer PCB with microvia stack-ups, careful power-rail decoupling, and matched-length SerDes routing. Reference designs from the QorIQ hardware documentation should be followed closely, since signal-integrity violations on the SerDes will degrade link margin or cause enumeration failures. This page consolidates distributor availability, parametric drop-in candidates within the QorIQ P5 family, and practical design notes not contained in the manufacturer datasheet, giving engineers a single decision-grade reference.

RFQ צור קשר
P5040NXE7TMC - QorIQ P5 4-Core 1.8GHz SoC, 1295-FCBGA | NXP
P5040NXE7TMC

P5040NXE7TMC - QorIQ P5 4-Core 1.8GHz SoC, 1295-FCBGA | NXP

The NXP (formerly Freescale) P5040NXE7TMC is a quad-core 64-bit Power Architecture system-on-chip (SoC) from the QorIQ P5 communications platform family, integrating four e5500 cores running up to 1.8 GHz in a 1295-ball FCBGA (FCPBGA) package measuring 37.5 x 37.5 mm. The device combines high-performance CPU subsystems with hardware-accelerated networking, security, and I/O, targeting wired and wireless networking, industrial control, and aerospace/defense equipment operating over the industrial -40C to +105C temperature range. A QorIQ P5 SoC is a communications-processor class of multicore microprocessor that integrates CPU cores, a coherent interconnect, memory controllers, packet-processing engines, security accelerators, and high-speed serial interfaces onto a single die. In the broader taxonomy, it sits as a microprocessor (MPU) -> communications processor -> application-specific SoC -> semiconductor IC. The P5 platform was engineered by Freescale (now NXP) to scale from single-core to quad-core configurations on a pin- and software-compatible footprint, simplifying platform migration across performance tiers. Key differentiating specifications include the four e5500 cores with dual-issue 7-stage pipelines, support for up to 32 GB of DDR3/DDR3L with ECC, two integrated 10 Gigabit Ethernet MACs plus eight 1 Gigabit Ethernet MACs, multiple PCI Express Gen2 controllers, SATA 2.0 interfaces, and a SEC crypto engine. The -TMC suffix indicates the industrial temperature grade (-40C to +105C) with a silicon revision R2.1, providing long-life-cycle availability for embedded and aerospace platforms. The architecture combines out-of-order execution support, a hierarchical cache topology with shared L3, and tightly coupled datapath accelerators. The 10 GbE and packet-processing engines offload networking tasks from the cores, allowing the device to deliver line-rate throughput on multiple Gigabit ports simultaneously while leaving CPU cycles available for control-plane and application processing. Typical applications include multi-service routers and switches, network-attached storage (NAS) controllers, wireless base station equipment, industrial control gateways, and defense/aerospace embedded computing platforms where long-life-cycle silicon and ruggedized temperature grades are mandatory. When designing with this device, plan for a high-density FCBGA layout (1295 balls at 1 mm pitch typical) requiring multi-layer PCB stack-up, controlled-impedance routing for SerDes lanes, and substantial thermal management for the 37.5 x 37.5 mm package. Designers should also budget for the DDR3 ECC memory design rules and reference NXP's QorIQ P5040 reference design for validated power, clock, and reset sequencing. This page synthesizes distributor pricing, drop-in alternatives within the QorIQ P5 family, and practical design considerations not consolidated on a single manufacturer or distributor page.

RFQ צור קשר
P64706-B21 - 32GB DDR5-5600 2Rx8 ECC RDIMM | HPE SmartMemory
P64706-B21

P64706-B21 - 32GB DDR5-5600 2Rx8 ECC RDIMM | HPE SmartMemory

The HPE P64706-B21 is a 32GB DDR5-5600 Registered ECC Smart Memory module (288-pin RDIMM) designed for HPE Gen11 ProLiant servers, featuring dual-rank x8 architecture, CAS-46-45-45 timings, EC8 grade components, and 1.10V operating voltage. It operates at a peak transfer rate of 5600 MT/s (PC5-44800) and supports on-module ECC for enterprise-class data integrity. DDR5 RDIMM (Registered DIMM) is a server-class memory module that places a register buffer between the DRAM chips and the memory controller, reducing electrical loading and enabling higher capacity and speed than unbuffered modules. Within the hierarchy: DDR5 SDRAM -> RDIMM -> ECC Registered DIMM -> Server Memory. DDR5 introduces on-die voltage regulation (PMIC), decision feedback equalization (DFE), and higher bank group counts compared with DDR4, which is essential for bandwidth-bound workloads like in-memory databases, virtualization, and AI inference. Key features include 32GB module capacity in a single-rank-pair (2Rx8) layout, 5600 MT/s data rate, CL46 CAS latency (46-45-45), 1.10V low-voltage operation (versus 1.2V for DDR4), on-module ECC and parity, and HPE SmartMemory firmware that enables performance optimization, pre-failure alerting, and tighter integration with HPE iLO management. The 288-pin RDIMM form factor is standard for Gen11 platforms. The module is qualified, tested, and warranty-supported exclusively when deployed in supported HPE ProLiant Gen11 servers (e.g., DL380 Gen11, ML110 Gen11, DL110 Gen11). It uses advanced ECC and Chipkill-like protection mechanisms and integrates with HPE's Smart Memory authentication, which validates genuine HPE firmware during POST and refuses unauthorized modules. Typical applications include HPE ProLiant Gen11 server memory expansion, virtualization hosts running VMware vSphere or Hyper-V, in-memory databases (SAP HANA, Redis), AI/ML training and inference servers, and enterprise database workloads (Microsoft SQL Server, Oracle). The 32GB density is the sweet-spot upgrade tier for systems scaling from 16GB base configurations to 64GB/96GB populated memory topologies. When designing with this module, confirm your server's memory population rules (HPE Gen11 requires balanced population across channels for optimal bandwidth) and verify the BIOS supports 5600 MT/s - lower-speed SKUs are used in older Gen10 platforms. Mixing RDIMM speeds is supported but the bus will downclock to the slowest module. This page synthesizes distributor pricing, OEM equivalent modules, and practical compatibility notes not found in the manufacturer datasheet alone - useful for procurement and IT planners evaluating HPE SmartMemory upgrades.

RFQ צור קשר
P82B715D - 2-Bit 400kHz I2C Bus Extender | Texas Instruments
P82B715D

P82B715D - 2-Bit 400kHz I2C Bus Extender | Texas Instruments

The Texas Instruments P82B715D is a 2-bit bidirectional I2C/SMBus buffer and cable extender designed for 3 V to 12 V operation and 400 kHz bus communication. It increases practical wiring capacitance from 400 pF to 3 nF and is packaged in an 8-pin SOIC (D). The device uses unidirectional analog current amplification to improve the current sink capability of I2C devices while preserving bidirectional data transfer. What is an I2C bus extender? An I2C bus extender, also called an I2C buffer or bus repeater, is an interface IC placed between two bus segments to increase usable bus length and capacitance. It helps a controller and peripheral communicate across wiring where one physical I2C segment alone would be too heavily loaded. The P82B715 belongs to the interface IC hierarchy and separates a main I2C bus from an extended transmission-line segment. Key features include a 3 V to 12 V operating supply range, 400 kHz signal support, two bidirectional signal channels, and support for higher bus capacitance than the conventional 400 pF I2C limit. According to the Texas Instruments product page and datasheet, the device is intended for I2C and derivative SMBus systems. It is particularly useful when long cables, connectorized wiring, or multiple branches raise total bus capacitance. The P82B715 uses a split-side arrangement: each buffered path supports a main-bus side and an extended-cable side. This arrangement helps isolate the extended wiring from the main bus and allows the system to tolerate substantially more wiring capacitance. Engineers must still follow the datasheet limits for voltage, current, timing, and cable loading; the part is not a general-purpose differential-line driver. Typical applications include industrial control modules, sensor networks, test equipment, remote I2C targets, embedded systems, and SMBus-compatible equipment. Its 400 kHz class makes it appropriate for moderate-speed control buses rather than high-speed I2C designs beyond the stated operating range. Design attention should focus on bus capacitance, pull-up placement, ground continuity, and the separation between main and extended bus sections. Verify signal rise time and timing margin with the actual cable and peripheral loading rather than relying on nominal bus length alone. This page combines manufacturer specifications, distributor identification, and practical bus-integration guidance to help engineers evaluate the P82B715D for longer or more capacitive I2C wiring.

RFQ צור קשר
P82B715DG4 - 2-Bit I2C Bus Extender | Texas Instruments
P82B715DG4

P82B715DG4 - 2-Bit I2C Bus Extender | Texas Instruments

The Texas Instruments P82B715DG4 is a 2-bit bidirectional I2C/SMBus buffer and cable extender operating from 3 V to 12 V at up to 400 kHz, packaged in an 8-pin SOIC. It strengthens and reshapes bus signals while supporting bidirectional data transfer between the main bus and a transmission bus. An I2C bus extender is an interface IC placed within an I2C system when cable length or bus capacitance prevents reliable communication. It belongs to the hierarchy of bus buffers and redrivers within interface ICs, allowing a controller and remote devices to communicate over a longer bus while preserving two-wire, open-drain signaling. The P82B715 uses analog current amplification to increase the current-sink capability of the I2C devices. Key features include a 250 ns delay time, 22 mA supply current, and an 8-SOIC package. The device supports a 12 V operating supply and is intended for 400-kHz I2C bus systems. Its bidirectional architecture allows the SDA and SCL paths to carry data in either direction without changing the logical behavior of the connected I2C system. Technically, the P82B715 is a bipolar device intended for I2C applications. Unidirectional analog current amplification on each internal path increases the current available to sink bus capacitance. This helps overcome the conventional 400-pF main-bus limitation while the extender supplies a larger allowable wiring capacitance on the transmission side. The result is improved signal rise time and more reliable communication across extended wiring. Typical applications include industrial control panels, building-automation equipment, sensor networks, programmable logic controller interfaces, and long cable runs between an I2C controller and remote peripherals. It is especially useful when the existing bus must be extended without redesigning the host controller or remote I2C devices. The primary design consideration is bus topology: connect the main bus, transmission bus, pull-up networks, and ground return exactly as shown in the manufacturer application guidance. Avoid introducing unnecessary stubs, and account for cable capacitance and rise-time margin at the selected 400-kHz operating rate. This page consolidates verified manufacturer and distributor facts, drop-in replacement evidence, and practical interface-design guidance into one engineering-oriented reference. It also distinguishes verified values from parameters that still require confirmation from the complete manufacturer datasheet.

RFQ צור קשר
P82B715DR - 2-Bit I2C Bus Extender | Texas Instruments
P82B715DR

P82B715DR - 2-Bit I2C Bus Extender | Texas Instruments

The Texas Instruments P82B715DR is a 2-bit bidirectional I2C/SMBus buffer and cable extender operating from 3 V to 12 V at up to 400 kHz, packaged in an 8-pin SOIC. It increases the sink-current capability of I2C drivers so the practical wiring-capacitance limit can extend from the conventional 400 pF to 3 nF. The P82B715DR is intended for systems where cable loading, long interconnects, or multiple bus nodes prevent reliable communication without buffering. An I2C bus extender is a specialized interface IC that preserves bidirectional open-drain bus signaling while placing controlled current amplification between a main bus and a remote segment. The P82B715 provides two buffered channels for SDA and SCL, allowing a controller or peripheral bank to communicate over a longer cable or higher-capacitance wiring. In the system hierarchy, it is an I2C/SMBus interface buffer within interface ICs and semiconductor signal-conditioning products. Key features include a 3 V to 12 V operating supply range, 400 kHz operation, bidirectional data transfer, support for 3 nF bus capacitance, and compatibility with TTL-level drivers. The verified product description identifies the P82B715 family as a bipolar IC using unidirectional analog current amplification. Its main engineering benefit is stronger bus-current drive, although the extender does not provide galvanic isolation and does not eliminate the need to control cable and connector parasitics. The P82B715DR is suitable for industrial control, long inter-card wiring, instrumentation, and systems where SDA or SCL must reach a remote connector. The buffered architecture helps maintain logic levels under capacitive loading, but designers should still minimize stub branches, use appropriate pull-up placement, and verify rise-time requirements at the lowest intended bus rate. The 8-SOIC package also supports conventional surface-mount assembly and easy comparison with the non-reel P82B715D ordering option. A key design consideration is that both sides of the device are connected to open-drain buses and require pull-up resistors selected for the actual bus voltage, load, and target rise time. Do not treat the extender as a level shifter when the two bus sections operate at different voltage domains; verify pull-up values and device limits from the manufacturer datasheet before mixing supply domains. This page combines verified manufacturer and distributor information with application guidance, commercial search answers, and honest replacement analysis. Pricing and availability are presented as of 2026-10-23 where the supplied data provides a price or inventory indication.

RFQ צור קשר
P82B715P - 2-Bit 3-12V I2C Bus Extender | Texas Instruments
P82B715P

P82B715P - 2-Bit 3-12V I2C Bus Extender | Texas Instruments

The Texas Instruments P82B715P is a 2-bit bidirectional I2C and SMBus buffer and cable extender designed for 3 V to 12 V operation and up to 400 kHz bus signaling. It extends the practical wiring capacitance from the conventional 400 pF I2C limit to 3000 pF on the buffered bus while retaining bidirectional data transfer. The device is supplied in an 8-pin DIP package. An I2C bus extender is an interface IC that regenerates or buffers SDA and SCL signals so a heavily loaded bus can operate beyond its original capacitance limit. In the signal-device hierarchy, the P82B715P belongs to the bus-buffer, signal-buffer, interface-IC, and semiconductor categories. It is intended for systems in which cable length, connector loading, or distributed capacitance prevents the controller and peripherals from communicating reliably on a direct I2C bus. The P82B715 uses analog current amplification to increase the current-sink capability of the connected I2C devices. Its buffered Lx and Ly interfaces are designed to sink the larger currents needed by a 3000 pF capacitive bus, while the Sx and Sy side connects to the source-side bus. The architecture supports bidirectional communication, and the datasheet lists a propagation delay of 250 ns. The verified specification data also identifies 22 mA supply current, 4.5 V to 12 V operating supply in one source, and 3000 pF input bus capacitance. Typical uses include long sensor cables, industrial control modules, remote I2C peripherals, test fixtures, and systems that divide a capacitive I2C bus into a buffered high-capacitance segment and a controller-side segment. The P82B715P should be selected only when the complete system still meets the controller's timing, voltage, and logic-level requirements. Because the bus is bidirectional, pull-up placement and signal rise-time behavior remain essential design considerations. For PCB implementation, keep the device connections short and place pull-up resistors on the appropriate bus sections according to the datasheet application guidance. Do not assume that an extender guarantees unlimited cable length: wire resistance, connector capacitance, pull-up strength, bus speed, and the peripheral's sink-current capability can still limit operation. The manufacturer product page and P82B715 datasheet are the primary references for electrical limits and pin behavior. This product page combines the verified manufacturer and distributor data with application guidance and explicitly identifies missing engineering data instead of estimating it. Use it to compare bus capacitance, voltage, speed, package, and sourcing requirements before committing to a design.

RFQ צור קשר
P82B715PN - 2-Bit I2C Bus Extender | NXP
P82B715PN

P82B715PN - 2-Bit I2C Bus Extender | NXP

The NXP Semiconductors P82B715PN is a 2-bit bidirectional I2C bus extender that buffers both SDA and SCL lines to extend the practical separation distance between devices on an I2C bus. It operates from 3 V to 12 V, supports operation up to 400 kHz, and is supplied in an 8-pin PDIP package designated SOT97-1. The device is intended for I2C-bus and derivative bus systems where cable length, bus capacitance, or signal integrity makes a direct bus connection impractical. An I2C bus extender is a bidirectional interface IC that regenerates or buffers clock and data signals rather than acting as a one-way logic buffer. The P82B715PN buffers both halves of a two-wire bus, allowing a master and one or more slaves to communicate across a greater physical distance than would normally be practical for an unbuffered I2C connection. Its 400 kHz operating capability preserves compatibility with conventional standard-speed I2C systems while supporting buffered-bus implementations. The P82B715PN is implemented as a bipolar integrated circuit and retains the operating modes and features associated with the I2C bus while adding buffered SDA and SCL paths. The operating-voltage range of 3 V to 12 V permits use in systems powered from common low-voltage rails. As a bidirectional extender, it can support applications in which either side of the buffered segment must participate in the bus transaction. The key engineering benefit is increased separation between communicating components, with the supplied documentation describing extension to approximately 50 m to 100 m depending on bus implementation. That distance should not be treated as a universal guarantee because cable capacitance, pull-up resistance, bus speed, topology, and termination remain important variables. The 400 kHz limit also means slower I2C rates can provide greater margin in long or capacitively loaded installations. Typical uses include long industrial sensor buses, distributed I2C peripheral connections, remote instrumentation, and retrofit systems where existing cabling must be reused. The device is also useful in derivative bus systems that require a buffered clock and data pair. Because it buffers rather than translates voltage levels, both connected bus segments must use compatible logic levels and the device must remain within its 3 V to 12 V supply range. When designing around the P82B715PN, verify pull-up placement, total bus capacitance, and signal rise time before committing to a long cable. The 400 kHz maximum bus rate leaves less timing margin than lower-rate operation, particularly when cable capacitance is high. A shorter cable, lower I2C clock rate, or properly selected pull-up network may be required when the installation approaches the upper end of the documented distance range. This page consolidates the verified NXP, Texas Instruments, distributor, and technical-index information for the P82B715PN, distinguishes confirmed characteristics from unavailable parameters, and provides a conservative drop-in assessment rather than presenting functionally similar interface ICs as unqualified replacements.

RFQ צור קשר
P82B715TD - 2-Bit 400 kHz I2C Bus Extender | NXP
P82B715TD

P82B715TD - 2-Bit 400 kHz I2C Bus Extender | NXP

NXP Semiconductors P82B715TD is a 2-bit bidirectional I2C-bus and SMBus extender operating from 3 V to 12 V at up to 400 kHz, supplied in an 8-lead SOIC package. The device buffers both clock and data lines to extend the practical separation distance between components on an I2C bus without requiring another bus controller. Its differential bus arrangement preserves bidirectional communication while reducing the loading presented by remote devices on the buffered side. An I2C-bus extender is a specialized interface IC within the broader bus-buffer and signal-repeater hierarchy. It sits between a host controller and a remote I2C segment, isolates the two sides electrically, and allows slow or heavily loaded bus sections to operate more reliably. Unlike a general-purpose unidirectional logic buffer, the P82B715 supports bidirectional clock and data signaling, making it suitable for I2C and derivative bus systems where both sides may initiate or acknowledge a transfer. The principal operating specifications are a 3 V to 12 V supply range, a 400 kHz maximum bus frequency, bidirectional operation on both buffered channels, and an 8-lead plastic small-outline package. The NXP product page identifies the package as SO8 with 8 leads on a 1.27 mm pitch and a body measuring 4.9 mm by 3.9 mm by 1.75 mm. These package dimensions allow the extender to be placed close to a bus segment while preserving a conventional SOIC-8 land pattern. The P82B715 is a bipolar integrated circuit, and its buffer arrangement uses internal series resistance to isolate the two bus sides. The resulting offset between a buffered input and its corresponding bus output depends on current flow, which makes system-level timing, pull-up selection, and wiring length important design variables. The enable pins allow the buffered sections to be disconnected when the device is not required, supporting controlled power management in multi-segment systems. Typical applications include extending I2C sensors, extending SMBus devices on industrial or telecommunications equipment, isolating cable capacitance from a controller, and supporting low-speed bus runs where additional loading would otherwise degrade rise time. The extender is also useful where a peripheral group must be placed behind connectors, test points, or long wiring while the main controller continues to operate from a separate bus segment. Designers should verify pull-up placement, enable polarity, maximum cable capacitance, operating frequency, and logic-level compatibility against the manufacturer datasheet before release. Because the P82B715 buffers rather than regenerates the bus waveform into an unrelated signal path, trace geometry, connector stubs, and the location of pull-up resistors can materially affect signal integrity. The buffered side should be treated as a distinct I2C segment with its own appropriate pull-up network. This product page consolidates the verified NXP and distributor data, separates manufacturer specifications from unavailable pricing fields, identifies genuine same-family drop-in alternatives, and adds application guidance and engineering checks that are not consolidated in a distributor catalog entry.

RFQ צור קשר
P82B96D - 400kHz Bidirectional I2C Buffer | Texas Instruments
P82B96D

P82B96D - 400kHz Bidirectional I2C Buffer | Texas Instruments

The Texas Instruments P82B96D is a 2-bit dual bidirectional bus buffer and cable extender for I2C-compatible systems, supporting operation from 2V to 15V and data rates up to 400kHz in an 8-pin SOIC package. The device isolates or extends two-wire buses while permitting communication between systems operating at different logic voltage levels. Its two bidirectional channels support bus-segmentation, voltage-level translation, and cable-extension applications where signal integrity and fault containment are important. A bidirectional bus buffer is an interface IC that regenerates and electrically separates a two-wire bus while preserving data flow in either direction. In the signal-conditioning hierarchy, it belongs to the bus-buffer and repeater family within interface ICs. Unlike a one-way level translator, a bidirectional buffer automatically detects the direction of bus traffic and allows either endpoint to become the bus master, making it suitable for I2C and SMBus-compatible links. The P82B96D operates across a 2V-to-15V supply range and supports bus logic levels from 2V to 15V. According to the Texas Instruments product page and datasheet, it provides two bidirectional I/O paths, a maximum data rate of 400kHz, and compatibility with I2C buses operating at different voltage levels. The SOIC-8 package supports conventional surface-mount assembly while providing separate access to both bus sides. Its non-latching bidirectional interface avoids a direction-control pin and uses differentiated logic-low behavior to prevent latching. The device can bridge normal I2C logic signals to another bus configuration, including a second P82B96, while its electrical isolation helps limit fault propagation between connected systems. The manufacturer documentation also warns that two Sx or Sy nodes on the same side must not be connected together. Typical applications include I2C bus extenders, level translation between 2V and 15V domains, SMBus-compatible isolation, cable segmentation, industrial control modules, embedded sensor networks, and test systems requiring a robust 400kHz bus repeater. The device is particularly useful where long interconnects, mixed logic voltages, or removable cable sections could otherwise degrade communication reliability. When integrating the P82B96D, preserve the I2C pull-up arrangement on each bus segment and keep the buffer close to the bus being extended. Confirm the complete system voltage range, rise-time budget, capacitance, and fault-current behavior against the manufacturer datasheet. The 400kHz rating should not be treated as a guarantee for every cable length or load combination. This page consolidates manufacturer specifications, distributor availability, verified drop-in alternatives, and practical selection guidance. It highlights the P82B96D’s voltage-range and bidirectional-buffer advantages while clearly identifying details that require confirmation before PCB release.

RFQ צור קשר
P82B96DG4 - 2-15V 400kHz I2C Bus Buffer | Texas Instruments
P82B96DG4

P82B96DG4 - 2-15V 400kHz I2C Bus Buffer | Texas Instruments

The Texas Instruments P82B96DG4 is a 2-bit bidirectional I2C/SMBus buffer and cable extender operating from 2 V to 15 V at 400 kHz in an 8-pin SOIC package. It allows two I2C buses operating at different logic levels to communicate through a passive, bidirectional interface, helping isolate bus capacitance and improve system partitioning. The device supports bidirectional data transfer and is identified by DigiKey as a two-channel, 400 kHz signal redriver in an 8-SOIC package. What is an I2C bus buffer? An I2C buffer is an interface IC that helps extend, isolate, or level-translate a two-wire serial bus. The P82B96 belongs to the broader bus-buffer and interface-IC hierarchy and is used when cable length, bus capacitance, or different logic domains make a direct connection unreliable. Its 400 kHz operating point targets standard-speed I2C systems rather than higher-speed I2C designs. Key features include a 2 V to 15 V operating power-supply range, bidirectional transfer on two bus bits, and compatibility with I2C and SMBus signaling. The manufacturer product page specifically describes the P82B96 as a 2-bit, bidirectional, 2 V to 15 V, 400 kHz I2C/SMBus buffer/cable extender. The 8-SOIC package is a conventional surface-mount package that supports standard PCB assembly and rework processes. Heisener lists 5,568 pieces in stock, but its lead time and price require a quotation. The device is useful when a controller and peripheral bus must be separated by cable distance, connectors, or different voltage domains. It is also appropriate for industrial modules, test equipment, and embedded systems where bus loading and level compatibility are important. The manufacturer documentation also references additional low-period timing of 1,060 ns and a 425 ns I2C bus rise-time allowance, which are relevant when validating system timing. For a robust design, confirm the actual bus voltage levels, capacitance, pull-up resistors, and required rise time against the manufacturer datasheet. Do not treat the quoted stock count as a guaranteed XAIPART inventory position, and obtain a current quote before purchasing. This page combines manufacturer information, distributor listings, and verified comparison data while distinguishing unavailable pricing and lifecycle details.

RFQ צור קשר
P82B96DGKR - 2-15V 400kHz I2C Buffer | Texas Instruments
P82B96DGKR

P82B96DGKR - 2-15V 400kHz I2C Buffer | Texas Instruments

Texas Instruments P82B96DGKR is a 2-bit bidirectional I2C/SMBus buffer and cable extender with a 2 V to 15 V operating supply range, 400 kHz bus speed, and an 8-pin VSSOP (DGK) package. The device provides two bidirectional bus channels and supports interfaces between I2C buses operating at different logic levels. According to the Texas Instruments product page, P82B96DGKR supports operation from -40 °C to 85 °C and is intended for systems requiring buffered bus communication over longer cables or PCB traces. An I2C buffer is an interface IC that regenerates or isolates bus signals while preserving bidirectional open-drain communication. Within the product hierarchy, the P82B96 belongs to the buffer, repeater, and signal-conditioning class of interface ICs used in embedded, industrial, and consumer electronics. Its role is not simply signal amplification: the device establishes a controlled bidirectional interface between a host-side I2C bus and a second bus segment with potentially different voltage and current characteristics. The principal features include two independently buffered bidirectional channels, a broad 2 V to 15 V operating supply range, and operation up to 400 kHz. The wide supply range supports compatibility with 2.5 V, 3.3 V, 5 V, 9 V, and 12 V bus environments identified in the available component data. Its 8-pin VSSOP package provides a compact physical implementation for boards where routing area and component count are important. The absence of a direction-control input also simplifies use with open-drain I2C and SMBus signaling. The P82B96 uses slightly different logic-low thresholds on its two sides to avoid latching when the bidirectional signal paths are active. Texas Instruments explicitly states that two or more Sx or Sy I/O pins must not be connected together on the same node. This architecture allows the buffer to support bidirectional transfers automatically, but it requires correct bus topology and suitable pull-up placement to prevent contention or unintended current paths. Typical uses include isolating one I2C segment from another, extending an I2C bus across a larger board, connecting control boards with different logic voltages, and isolating cable-connected sensors or EEPROMs. The buffer is especially useful where long traces, connectors, cable capacitance, or multiple bus nodes could weaken the original bus signal. Designers must still validate rise time, pull-up resistance, capacitance, and the maximum number of supported devices. When designing around the P82B96, place the device close enough to the remote bus segment to limit the unbuffered section, while keeping the host-side bus short and well controlled. Verify pull-up placement, confirm that both sides operate within their specified logic-voltage limits, and avoid connecting multiple Sx or Sy pins to one node. The available manufacturer and distributor information does not provide a complete timing diagram or detailed electrical limits in the supplied excerpts. This product page consolidates verified manufacturer specifications, distributor pricing, ordering information, and package details into an engineering-focused reference. It also identifies the limited set of same-footprint alternatives that could be verified from the available cross-reference data, avoiding unsupported cross-package substitutions that would require PCB changes.

RFQ צור קשר
P82B96DGKRG4 - 2-15V I2C Bus Buffer | Texas Instruments
P82B96DGKRG4

P82B96DGKRG4 - 2-15V I2C Bus Buffer | Texas Instruments

The Texas Instruments P82B96DGKRG4 is a dual bidirectional I2C and SMBus bus buffer and cable extender with a 2 V to 15 V operating-supply range and a 400 kHz operating frequency. The device is supplied in an 8-pin VSSOP package and is intended for bidirectional level translation between I2C buses operating at different logic voltages. According to the manufacturer product page, the P82B96 is a 2-bit, non-latching bidirectional bus interface. An I2C bus buffer is an interface IC that buffers two bidirectional clock-and-data lines while allowing the buses on either side to use different voltage domains. In the signal-chain hierarchy, the P82B96 is an I2C bus buffer, then a bidirectional bus repeater, then a bus extender, and finally a general-purpose interface IC. This position matters because I2C pull-up networks and bus capacitance can limit reliable communication over longer cables or between physically separated circuit boards. Key features include support for buses operating at different logic levels, bidirectional transfer of I2C signals, and compatibility with I2C and SMBus systems. The verified 400 kHz frequency identifies the device as a standard-speed rather than high-speed or fast-mode-plus bus extender. Its 2 V to 15 V supply range permits use with low-voltage embedded systems as well as higher-voltage industrial bus interfaces, subject to the individual bus voltage and logic-threshold requirements. The P82B96 uses a non-latching bidirectional buffer arrangement so each buffered line can carry traffic in either direction. The two-buffer architecture separates the source-side and destination-side bus segments, allowing logic-level translation when the two buses operate at different voltages. The exact enable, ground, voltage-domain, and data-pin assignments require confirmation from the manufacturer datasheet before PCB routing or replacement qualification. Typical applications include level translation between microcontroller and sensor buses, extending an I2C connection between circuit boards, isolating bus capacitance on longer wiring, and connecting peripheral groups with different supply voltages. The 400 kHz operating limit makes it appropriate for conventional I2C devices rather than designs requiring 1 MHz I2C or faster modes. The primary design consideration is preserving the correct pull-up arrangement on each bus segment. Adding buffer separation can help isolate capacitance, but inappropriate pull-up strength or excessive cable length can still cause timing failures. Engineers should verify logic thresholds, bus capacitance, rise-time limits, and the exact pinout against the Texas Instruments P82B96 datasheet. This page consolidates manufacturer and distributor information, source-backed pricing, replacement availability, application guidance, and comparison criteria for engineers evaluating the P82B96DGKRG4. It also distinguishes verified ordering information from parameters that still require direct datasheet confirmation.

RFQ צור קשר
P82B96DR - 400kHz Bidirectional I2C Buffer | Texas Instruments (Tape & Reel)
P82B96DR

P82B96DR - 400kHz Bidirectional I2C Buffer | Texas Instruments (Tape & Reel)

The Texas Instruments P82B96DR is a 2-bit dual bidirectional bus buffer and cable extender for I2C-compatible systems, supporting operation from 2V to 15V and data rates up to 400kHz in an 8-pin SOIC package. The device isolates or extends two-wire buses while permitting communication between systems operating at different logic voltage levels. Its two bidirectional channels support bus-segmentation, voltage-level translation, and cable-extension applications where signal integrity and fault containment are important. A bidirectional bus buffer is an interface IC that regenerates and electrically separates a two-wire bus while preserving data flow in either direction. In the signal-conditioning hierarchy, it belongs to the bus-buffer and repeater family within interface ICs. Unlike a one-way level translator, a bidirectional buffer automatically detects the direction of bus traffic and allows either endpoint to become the bus master, making it suitable for I2C and SMBus-compatible links. The P82B96DR operates across a 2V-to-15V supply range and supports bus logic levels from 2V to 15V. According to the Texas Instruments product page and datasheet, it provides two bidirectional I/O paths, a maximum data rate of 400kHz, and compatibility with I2C buses operating at different voltage levels. The SOIC-8 package supports conventional surface-mount assembly while providing separate access to both bus sides. Its non-latching bidirectional interface avoids a direction-control pin and uses differentiated logic-low behavior to prevent latching. The device can bridge normal I2C logic signals to another bus configuration, including a second P82B96, while its electrical isolation helps limit fault propagation between connected systems. The manufacturer documentation also warns that two Sx or Sy nodes on the same side must not be connected together. Typical applications include I2C bus extenders, level translation between 2V and 15V domains, SMBus-compatible isolation, cable segmentation, industrial control modules, embedded sensor networks, and test systems requiring a robust 400kHz bus repeater. The device is particularly useful where long interconnects, mixed logic voltages, or removable cable sections could otherwise degrade communication reliability. When integrating the P82B96DR, preserve the I2C pull-up arrangement on each bus segment and keep the buffer close to the bus being extended. Confirm the complete system voltage range, rise-time budget, capacitance, and fault-current behavior against the manufacturer datasheet. The 400kHz rating should not be treated as a guarantee for every cable length or load combination. This page consolidates manufacturer specifications, distributor availability, verified drop-in alternatives, and practical selection guidance. It highlights the P82B96DR’s voltage-range and bidirectional-buffer advantages while clearly identifying details that require confirmation before PCB release.

RFQ צור קשר
P82B96DRG4 - 2-15V Dual I2C Buffer | Texas Instruments
P82B96DRG4

P82B96DRG4 - 2-15V Dual I2C Buffer | Texas Instruments

The Texas Instruments P82B96DRG4 is a dual bidirectional I2C/SMBus bus buffer and cable extender with a 2 V to 15 V operating power-supply range, 400 kHz signaling, and an 8-pin SOIC package. It supports bidirectional data transfer, allows I2C buses operating at different logic levels to communicate, and is intended for extending a main bus over a larger capacitive load. An I2C bus buffer is an interface IC that regenerates or isolates a bidirectional serial bus while preserving clock and data signaling. The P82B96 belongs to the broader bus-buffer and signal-buffer hierarchy, supporting the I2C/SMBus ecosystem. Its two channels can support level translation or cable extension where the connected devices do not share identical logic voltage conditions. The P82B96DRG4 is specified for a 400 kHz bus frequency and a 2 V to 15 V operating supply range. The verified distributor and manufacturer listings identify it as a dual bidirectional bus buffer, while the product page identifies it as a 2-bit I2C/SMBus buffer/cable extender. The SOIC-8 package is surface-mount and is identified in distributor listings as an 8-SOIC device. Exact pin names, pinout details, electrical limits, and capacitance values are not supplied in the verified snippets and are therefore not inferred here. Its main engineering value is bus isolation and extension rather than high-speed differential signal conditioning. Bidirectional operation allows the same connection to carry data in either direction, which is required by I2C clock and data lines. The 400 kHz rating makes the device relevant to standard-speed I2C systems, while the broad supply range supports systems spanning multiple common logic domains when the associated datasheet limits are respected. Typical uses include extending an I2C bus between a controller and remote sensors, isolating a noisy or high-capacitance bus section, connecting I2C devices operating at different logic levels, and reducing loading on a host bus. Designers should verify signal timing, pull-up resistor placement, supply sequencing, logic thresholds, and the maximum supported bus capacitance against the manufacturer datasheet before production use. This page synthesizes verified manufacturer and distributor information, package identifiers, purchasing references, and design guidance. It does not invent missing electrical parameters, pin names, pricing values, or alternative cross-references that were not present in the supplied data.

RFQ צור קשר