מעגלים משולבים

R5F21104FP#U0

R5F21104FP#U0 - 16-bit 16MHz R8C MCU | Renesas

Renesas Electronics R5F21104FP#U0 is a 16-bit R8C-series microcontroller with a 16 MHz operating frequency, 16 KB of flash program memory, and a 32-LQFP 7 x 7 mm package. The verified product listings identify it as part of the R8C/1x/10 family and support operation from a 3 V to 5 V supply range. Its compact package and combination of embedded flash and general-purpose microcontroller resources suit compact control systems, industrial equipment, and embedded products. A microcontroller is a semiconductor containing a processor core, program memory, data memory, peripheral interfaces, and dedicated I/O in one integrated circuit. The R8C architecture places this device in the hierarchy of embedded microcontrollers, embedded processors, programmable controllers, and semiconductors. Compared with a discrete processor design, an integrated MCU reduces board area and simplifies the relationship among firmware execution, pin multiplexing, timing, and serial communications. The verified data identifies a 16-bit R8C core operating at up to 16 MHz, with 16 KB of flash organized as 16K x 8. The device is available in a 32-LQFP package measuring 7 x 7 mm and is associated with a 3 V to 5 V operating class. The #U0 ordering suffix and tray packaging are reflected in distributor records, while another distributor description identifies the part as lead-free. The R8C/1x/10 family combines a compact general-purpose microcontroller architecture with embedded flash and dedicated peripheral resources. Its 16 MHz clock rate provides a clear baseline for control-loop, monitoring, human-interface, and communication-management tasks. Flash memory retains application firmware in the device itself, while the 32-LQFP package provides 32 external leads for power, ground, reset, clock, serial interfaces, timers, and general-purpose I/O according to the manufacturer datasheet. Typical uses include industrial controllers, sensor-interface equipment, compact appliance controls, building-control modules, and communication-oriented embedded equipment. A design using this MCU can consolidate a small state machine, periodic sensor sampling, actuator commands, and local diagnostics into one component. For battery- or USB-powered products, the 3 V to 5 V class is especially useful, although the final power budget must be checked against the exact operating conditions. Designers should preserve the decoupling and signal-integrity layout shown in the manufacturer datasheet, provide a stable clock and reset arrangement, and confirm that every peripheral function assigned to a multiplexed pin remains available in the selected package. Firmware should also be validated against the operating temperature range and supply limits before production release. This page consolidates the verified distributor and manufacturer information, distinguishes a documented same-family upgrade from unsupported substitutes, and adds practical selection and design guidance that can be applied without confusing functional alternatives with true pin-compatible drop-in replacements.

RFQ צור קשר

R5F21112FP#U0

R5F21112FP#U0 - 16-bit 20MHz 8KB Flash MCU | Renesas

Renesas Electronics R5F21112FP#U0 is a 16-bit R8C/1x/11 series microcontroller with a 20 MHz operating frequency and 8 KB of flash memory, supplied in a 32-pin LQFP package. It is designed for embedded control applications that require efficient instruction execution, compact packaging and embedded flash. The R8C/Tiny-series core provides a 16-bit processing architecture suitable for industrial, consumer and embedded product control systems. The MCU operates from a 3 V to 5 V supply, with the available product information identifying a 3/5 V device. The R5F21112FP family uses a high-performance silicon gate CMOS process and is packaged as a 32-pin plastic molded LQFP. Its 8 KB flash memory provides on-chip program storage for firmware, while the 16-bit CPU core supports efficient control-loop and peripheral-oriented software execution. Key characteristics include a 20 MHz maximum operating frequency, 8 KB flash memory and a 32-LQFP (7 x 7 mm) package. The available distributor and manufacturer listings identify this part as an R8C/1x/11 microcontroller. The verified product information does not include detailed RAM size, peripheral inventory, ADC specifications, timer resources, I/O count or electrical timing values, so those details should be confirmed in the manufacturer datasheet before final design release. R5F21112FP#U0 is suitable for compact embedded controllers, industrial equipment, appliance controls, instrumentation, serial-interface products and general-purpose embedded control boards. Its small LQFP package can support prototype and moderate-volume production layouts when the required peripheral and pin functions are available. Designers should verify the exact pin assignments, clock requirements, reset behavior and memory map against the official documentation before PCB routing or firmware development. The most important engineering consideration is that the #U0 ordering suffix and 32-LQFP footprint do not, by themselves, establish complete drop-in compatibility with another MCU. Pin assignment, core architecture, memory size, peripheral resources, voltage tolerance and timing must all be compared. This page consolidates the verified distributor and Renesas product information while avoiding unsupported assumptions about missing technical parameters.

RFQ צור קשר

R5F21113FP#U0

R5F21113FP#U0 - 16-Bit 20MHz R8C MCU | Renesas

The Renesas Electronics R5F21113FP#U0 is a 16-bit R8C/1x/11 microcontroller operating at up to 20 MHz with 12 KB of flash memory in a 32-LQFP 7 x 7 mm package. Designed for compact embedded-control systems, the device combines a high-performance R8C CPU core with a 3 V to 5 V operating range and lead-free construction. Its 12K x 8 flash organization supports firmware storage for industrial controllers, consumer equipment, instrumentation, and embedded peripheral controllers. A microcontroller is an integrated circuit containing a processor core, program memory, data memory, peripherals, and I/O on one device. The R8C architecture belongs to the 16-bit microcontroller class and combines relatively high instruction efficiency with a compact instruction set suited to embedded products. Within the broader semiconductor hierarchy, the R5F21113FP#U0 is a general-purpose embedded processor and system-on-chip component rather than a discrete logic or analog device. Key characteristics include a 20 MHz maximum operating frequency, 12 KB of flash program memory, a 3 V to 5 V supply range, and a 32-pin plastic molded LQFP package. The flash-based program architecture allows firmware to be stored directly in the MCU rather than in an external memory device, helping reduce total system complexity. The manufacturer describes the part within its R8C/11 family of 16-bit microcontrollers with R8C CPU cores. The R8C/1x/11 core is intended for applications that require efficient 16-bit processing without the cost and complexity of a high-end application processor. Its compact LQFP footprint remains compatible with conventional surface-mount assembly and reflow processes, while the 7 x 7 mm body allows placement alongside analog, power, communication, and sensing components on a densely populated control board. Typical uses include industrial control modules, appliance controllers, measurement equipment, motor-control peripherals, sensor-hub designs, and compact consumer products. For battery-operated or precision analog systems, designers should confirm supply voltage, peripheral mix, clock requirements, and power-consumption targets against the manufacturer datasheet before committing the MCU to a board architecture. The primary design consideration is firmware portability across the R8C/1x/11 family. Because package suffix codes can identify different temperature, packaging, or ordering options, engineers should compare the exact MPN, pin assignments, peripheral availability, and memory configuration rather than assuming that every family member has identical behavior. This page organizes the principal specifications, sourcing information, family-level drop-in options, application guidance, and practical design notes. It is intended to help engineers identify whether the R5F21113FP#U0 matches a 16-bit embedded-control requirement before schematic capture and PCB layout begin.

RFQ צור קשר

R5F21113FP#W4

R5F21113FP#W4 - 16-Bit 20MHz 12KB Flash MCU | Renesas

The Renesas Electronics R5F21113FP#W4 is a 16-bit R8C/1x/11 family microcontroller with a 20 MHz operating speed, 12 KB of flash program memory, 768 bytes of RAM, and 22 I/O pins. The device is packaged in a 32-pin LQFP measuring 7 mm by 7 mm and is supplied in tray packaging. Its R8C/Tiny-series CPU core uses a high-performance silicon-gate CMOS process to provide an efficient architecture for embedded control applications. An R8C microcontroller is a 16-bit embedded-control component within the broader MCU and microprocessor hierarchy. It combines flash-resident firmware, internal data RAM, timers, serial interfaces, and general-purpose I/O in one device. This integration allows compact control systems to replace separate processor, memory, and peripheral components while keeping firmware, board area, and assembly requirements consolidated. Key features include 12 KB of flash memory organized as 12K by 8 bytes, 768 bytes of RAM, 22 general-purpose I/O lines, and a maximum listed operating frequency of 20 MHz. The internal oscillator reduces the number of external timing components required in many designs. Tray packaging supports volume production and automated PCB assembly when the board geometry and component orientation match the 32-pin LQFP footprint. The R8C/1x/11 architecture is intended for compact embedded controllers that benefit from 16-bit instruction handling and efficient peripheral integration. The manufacturer describes the R8C/11 family as supported primarily for customers that previously adopted these products and recommends the RL78/G14 family for new designs. Legacy-product support status should therefore be considered when planning a long-lived design. Typical uses include industrial control modules, compact instrumentation, appliance controllers, embedded interface products, and small automation equipment. The 22 available I/O pins provide connectivity for sensors, indicators, switches, communications links, and discrete actuators, while the 20 MHz operating rate supports time-sensitive control tasks. PCB planning should follow the manufacturer package drawing and pin-assignment table. Confirm oscillator requirements, supply voltage limits, programming connections, and all peripheral multiplexing before releasing a layout. Because firmware, toolchain, and peripheral behavior are architecture-specific, treat software migration as part of replacement planning rather than assuming electrical similarity alone guarantees interchangeability. This product page consolidates the device identity, memory organization, package characteristics, sourcing information, and replacement constraints into a design-focused reference. It also distinguishes true drop-in interchangeability from merely similar microcontrollers by requiring the same footprint, pin compatibility, suitable electrical parameters, and compatible firmware behavior.

RFQ צור קשר

R5F21114FP#U0

R5F21114FP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

The Renesas Electronics R5F21114FP#U0 is a 16-bit R8C microcontroller with a 20 MHz operating frequency, 16 KB flash program memory and a 32-LQFP 7 x 7 mm package. The device operates from 3 V to 5 V according to Mouser, making it suitable for embedded control systems that use either 3.3 V or 5 V power rails. Its R8C CPU core combines a compact 16-bit architecture with efficient CISC-style instructions. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, peripherals and I/O into one package. The R8C/Tiny family belongs to the broader hierarchy of embedded processors, microcontrollers, semiconductor devices and electronic control components. Renesas describes the R5F21114FP#U0 as a non-promotion member of its 16-bit microcontroller range, and its order page lists the device for procurement. The R5F21114FP#U0 provides 16 KB of flash memory, a 20 MHz maximum clock and 3 V to 5 V supply operation in a 32-LQFP package. Compared with a general-purpose desktop processor, this device is optimized for compact embedded control, where deterministic peripheral access, compact implementation and low board-area requirements matter more than graphics performance or large memory capacity. The 7 x 7 mm LQFP also remains inspectable after soldering and is suitable for conventional PCB assembly processes. The MCU is manufactured using a high-performance silicon-gate CMOS process, as described by the Renesas datasheet information. This implementation supports the R8C/Tiny CPU core and a broad set of embedded-control resources. Exact RAM capacity, peripheral inventory, clock-generation options and electrical limits are not included in the verified excerpts supplied for this page, so those values require confirmation in the complete manufacturer datasheet before final design sign-off. Typical uses include industrial controllers, consumer products, measurement equipment and compact embedded control modules. The 16 KB flash capacity is appropriate for moderate firmware sizes, while the 3 V to 5 V operating range supports common industrial and commercial supply voltages. Designers should confirm peripheral timing, memory availability and pin-level requirements when migrating a board from another Renesas MCU. For PCB implementation, follow the complete Renesas package drawing and pin-assignment documentation. Place bypass capacitors near the supply pins, route sensitive signals away from switching nodes and verify programming, reset and clock connectivity against the manufacturer reference design. Because the supplied excerpts do not provide a complete verified pin table, no pin assignments should be inferred from the package drawing alone. This product record consolidates verified distributor specifications, current pricing information, same-family alternatives and practical sourcing guidance. It is intended to support initial design and procurement decisions while clearly separating confirmed data from parameters that still require review in the full Renesas datasheet.

RFQ צור קשר

R5F21114FP#W4

R5F21114FP#W4 - 16-Bit R8C Microcontroller | Renesas

Renesas Electronics R5F21114FP#W4 is a 16-bit R8C/Tiny-series microcontroller operating at up to 20 MHz, with 16 KB of Flash program memory and 1 KB of RAM. The device is packaged in a 32-LQFP measuring 7 x 7 mm and is supplied in tape-and-reel packaging. Its 22 I/O pins provide a practical interface for embedded control tasks. A microcontroller is a programmable semiconductor that combines a processor core, program memory, data memory, I/O ports, and peripherals on one integrated circuit. Within the embedded-system hierarchy, the R8C/Tiny family belongs to the 16-bit microcontroller class and provides a compact platform for appliance controls, industrial equipment, instrumentation, and embedded products. Its instruction-efficient R8C core is designed for compact systems that require more processing capability than a basic 8-bit controller. The R5F21114FP#W4 combines 16 KB of Flash memory with 1 KB of internal RAM. Flash memory retains programmed firmware when power is removed, while RAM provides volatile working space for stack operations, variables, and intermediate calculations. A 20 MHz operating frequency supports time-sensitive control tasks, and the 22 available I/O pins allow the device to connect directly to switches, sensors, displays, actuators, and interface circuits. The device uses Renesas silicon-gate CMOS technology and an instruction-efficient R8C/Tiny CPU core. Its 32-pin plastic-molded LQFP package is suitable for automated board assembly and provides a conventional 7 x 7 mm footprint. The W4 ordering designation identifies the tape-and-reel configuration, supporting repeatable pick-and-place and manufacturing operations. Pin assignment, signal levels, clock requirements, and peripheral functions should be confirmed against the R8C/11 Group Datasheet before layout release. Typical uses include small appliance controllers, sensor-interfaces, industrial modules, instrument panels, and compact embedded control systems. The device is useful when a design needs a deterministic 16-bit control platform without a large external memory subsystem. Its 16 KB firmware space can hold a compact control routine, startup logic, state machine, and communication handler, although final firmware sizing must be checked after compilation. Layout planning should preserve access to all programming and debug functions and follow the manufacturer’s recommended decoupling and clock arrangements. Confirm the exact pin roles, operating-voltage range, reset behavior, peripheral mix, and programming interface against the applicable Renesas documentation before schematic capture or PCB release. This page organizes the R5F21114FP#W4 core specifications, manufacturing attributes, application context, and design considerations. It also distinguishes verified device characteristics from engineering information that must still be checked in the R8C/11 Group Datasheet and final design documentation.

RFQ צור קשר

R5F21122FP#U0

R5F21122FP#U0 - 16-Bit 16MHz R8C MCU | Renesas Electronics

The Renesas Electronics R5F21122FP#U0 is a 16-bit R8C/1x/12 embedded microcontroller with a 16 MHz clock, 8 KB of Flash program memory, and a 32-pin LQFP package measuring 7 x 7 mm. It operates from a 3/5 V supply and is designed for compact control systems requiring efficient instruction execution and a small pin count. An R8C microcontroller is a 16-bit CISC-based control device within the broader embedded-microcontroller and semiconductor hierarchy. The R8C Tiny Series core combines compact instruction encoding with a 1 Mb address space, allowing embedded designers to balance processing performance, memory capacity, and board area. The R5F21122FP#U0 is positioned for cost-sensitive industrial, appliance, instrumentation, and general embedded-control applications. Key characteristics include 16-bit processing, an operating clock of 16 MHz, 8 KB of Flash memory, 4 KB of data Flash, and 3/5 V operation. Its R8C/1x/12 group designation identifies the core and device family, while the 32-pin LQFP exposes the required peripheral and power connections in a standard surface-mount footprint. The silicon-gate CMOS process supports integration of the CPU core, program memory, data Flash, timers, serial interfaces, and control peripherals. The manufacturer's product page describes a device built around the R8C Tiny Series CPU core with sophisticated instructions designed for high instruction efficiency. A 1 Mb address space provides substantially more architectural range than the 8 KB physical Flash allocation alone suggests. This addressability supports organized firmware structures and expansion of peripheral or memory mapping within the R8C architecture, although the complete map should be confirmed in the manufacturer datasheet. Typical uses include industrial equipment, consumer appliances, sensor controllers, building controls, motor-control peripherals, and compact embedded instruments. The 32-LQFP package is particularly useful where a smaller footprint than a high-pin-count MCU is desirable while retaining enough I/O for standard control functions. The 3/5 V supply requirement also suits systems built around legacy-compatible embedded-control architectures. Designers should verify the complete peripheral set, interrupt behavior, electrical limits, and exact pin assignments in the manufacturer datasheet before schematic capture. PCB layout must preserve adequate clearance around all 32 leads and route sensitive oscillator and supply connections appropriately. Firmware selection should account for the 8 KB program-memory ceiling, while any use of data Flash requires the appropriate endurance and write-cycle handling from the device documentation. This product page combines manufacturer and distributor technical information, package details, engineering-oriented application guidance, and an honest drop-in replacement assessment. It is intended to help engineers evaluate memory constraints, pin compatibility, supply requirements, and design tradeoffs before committing the R5F21122FP#U0 to an embedded-control design.

RFQ צור קשר

R5F21124FP#U0

R5F21124FP#U0 - 16-bit 16MHz 16KB Flash MCU | Renesas Electronics

The Renesas Electronics R5F21124FP#U0 is a 16-bit R8C/1x/12 series microcontroller with a 16 MHz operating frequency, 16KB of flash program memory, and a 32-pin LQFP package measuring 7 mm by 7 mm. It operates from a 3 V or 5 V supply and is identified as a Pb-Free device. The manufacturer describes this MCU as being built with a high-performance silicon gate CMOS process and using the R8C Tiny Series CPU core. Its architecture combines a compact 16-bit microcontroller with embedded flash memory in a package intended for space-constrained embedded systems. A microcontroller is a semiconductor device that integrates a CPU core, program memory, data memory, peripheral functions, and I/O into one integrated circuit. The R5F21124FP#U0 belongs to the R8C/12 group of Renesas 16-bit microcontrollers, a family positioned between simple 8-bit controllers and more resource-intensive 32-bit application processors. This device is intended for embedded control, where an application program must handle sensor inputs, actuator outputs, communications, timing, and user-interface functions in one compact component. The main engineering characteristics visible for this exact MPN are the 16-bit CPU architecture, 16 MHz maximum clock information identified in the product listing, 16KB flash storage, 3 V or 5 V operation, and 32-LQFP packaging. The R5F21124FP#U0 is marked as Pb-Free. Detailed electrical limits, RAM capacity, peripheral channel assignments, clock-tree options, timer resources, communication interfaces, and absolute maximum ratings must be confirmed in the Renesas datasheet before a design is released. Renesas states that the R8C/12 group is supported for customers that have already adopted these products and recommends the RL78/G14 group for new designs. This lifecycle distinction is important: the R5F21124FP#U0 remains useful for maintenance, continuity, and previously qualified industrial or consumer programs, but engineers should verify roadmap and sourcing conditions before starting a new platform. Existing software, peripheral mapping, and board layouts can make continuity preferable to redesign, provided the product remains suitable for the target application. Typical uses include compact industrial controllers, sensor-conditioning and monitoring equipment, small appliance controls, communication modules, and legacy embedded systems that require a 16-bit core with embedded flash. The 32-LQFP package provides a conventional quad flat-pack footprint suitable for automated PCB assembly and prototype fabrication. Because the exact pin map and peripheral multiplexing are not reproduced in the product-page search result, board designers should use the manufacturer pin-assignment table when assigning ports, power pins, reset, clock, and programming signals. This page summarizes the exact R5F21124FP#U0 identity and technical attributes, compares it with verified catalog information, and provides procurement-oriented guidance without presenting unverified competitor substitutions. For current commercial terms, use the Request a Quote form on this page. For a new design, evaluate the recommended RL78/G14 path; for an existing R8C/12 platform, confirm pin compatibility, software support, lifecycle status, and supply continuity through the manufacturer's product documentation.

RFQ צור קשר

R5F21132FP#U0

R5F21132FP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

Renesas Electronics R5F21132FP#U0 is a 16-bit R8C/13 series microcontroller with a 20 MHz operating frequency, 8 KB flash memory, and a 32-LQFP 7 x 7 mm package. It operates across a 2.7 V to 5.5 V supply range and provides a 10-bit ADC. The device uses an R8C/Tiny Series CPU core and high-performance silicon gate CMOS process. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, timers, serial interfaces, analog peripherals, and interrupt handling into one device. The R8C/13 belongs to the hierarchy of 16-bit embedded processors, microcontrollers, and general-purpose embedded control ICs. Renesas supports this group for customers that have already adopted its products and recommends the RL78/G14 Group for new designs. The principal features include 16-bit processing at 20 MHz, 8 KB of flash organized as 8K x 8, a 2.7 V to 5.5 V operating supply range, and a 10-bit ADC. The 32-pin LQFP package provides a practical surface-mount option for industrial, consumer, and control systems where board area is less constrained than in the smallest plastic packages. The 8K x 8 flash organization supports embedded firmware storage while the 20 MHz clock provides control and peripheral timing headroom. The R8C/Tiny Series core emphasizes instruction efficiency in a compact 16-bit architecture. Its on-chip peripherals reduce the need for external components in designs involving signal acquisition, timing, serial communication, and digital control. The high-performance silicon gate CMOS process supports the device's operating characteristics, while the R8C/13 family provides a common software-oriented platform for compatible members. Typical applications include industrial control panels, sensor-conditioning systems, motor-control support circuitry, programmable timers, data-acquisition modules, and compact consumer appliances. The 10-bit ADC is suitable for many sensor and control tasks where resolution and conversion performance are adequate for monitoring rather than precision measurement. A qualified firmware engineer should confirm the required timers, serial interfaces, analog channels, and interrupt resources against the manufacturer datasheet. Design attention should focus on clocking, decoupling, reset behavior, and firmware migration because this is a non-promotion family intended primarily for previously adopted designs. Confirm pin assignments and peripheral multiplexing on the physical R5F21132FP package before making an engineering change. For new projects, evaluate the manufacturer-recommended RL78/G14 path rather than assuming this legacy device is the optimal architectural choice. This page consolidates the manufacturer's device positioning, verified distributor specifications, package information, practical application guidance, and the limited drop-in replacement landscape. The replacement list is intentionally narrow because a genuine alternative must preserve the 32-LQFP footprint, pin compatibility, operating voltage, and embedded-control requirements rather than merely offer similar clock speed or memory capacity.

RFQ צור קשר

R5F21133FP#U0

R5F21133FP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

Renesas Electronics R5F21133FP#U0 is a 16-bit R8C/1x/13 microcontroller operating at up to 20 MHz, with 12 KB of flash memory and a 32-LQFP 7 x 7 mm package. The R5F21133FP#U0 is designed for embedded control applications that require deterministic instruction execution, compact integration, and a 32-pin surface-mount footprint. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and I/O into one component. The R8C/1x/13 belongs to the R8C family of 16-bit embedded controllers, which sits within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Renesas positions the R8C/11 Group for designs already based on the family, while recommending RL78/G14 for new projects. Key characteristics include a 16-bit CPU, a 20 MHz operating frequency, and 12 KB of flash memory. The device is identified as the R8C/1x/13 configuration and is offered in a compact 32-LQFP package measuring 7 x 7 mm. The listed operating range includes 3 V and 5 V supply operation, while one distributor specification identifies a 2.7 V to 5.5 V working range for this exact ordered device. The R8C CPU core uses instruction-efficient embedded-control techniques intended to balance processing performance with compact code size. This makes the R5F21133FP#U0 relevant to designs requiring more control capability than an 8-bit MCU while retaining a relatively small 32-pin footprint. The flash-memory capacity provides 12 KB for firmware, constants, and configuration data. Typical uses include industrial automation, embedded measurement equipment, appliance control, consumer-product interfaces, and compact motor or system-control modules. The 20 MHz clock rate is useful for time-critical control loops, while the 7 x 7 mm LQFP package simplifies assembly on conventional surface-mount production lines. PCB design should preserve a clean analog and digital supply path, route oscillator and reset signals away from noisy switching nodes, and follow the package-specific land pattern in the manufacturer datasheet. Firmware migration also requires checking peripheral assignments, interrupt vectors, memory organization, and peripheral-register compatibility rather than assuming software compatibility from the family name alone. This product page combines the exact ordering information, technical identity, sourcing workflow, and engineering considerations for R5F21133FP#U0. It helps designers separate the verified R8C/1x/13 configuration from similarly named family members before committing to a PCB or production release.

RFQ צור קשר

R5F21134FP#U0

R5F21134FP#U0 - 16-bit 20MHz R8C/13 MCU, 16KB Flash, 32-LQFP | Renesas

Renesas Electronics R5F21134FP#U0 is a 16-bit R8C/Tiny Series CMOS microcontroller built on the R8C/13 group core, operating at up to 20 MHz with 16 KB of on-chip Flash memory in a 32-pin plastic molded LQFP (7x7 mm) package. The device runs from a single 2.7 V to 5.5 V supply, provides a 1 MB program address space, and integrates two UART channels plus a watchdog timer for compact embedded control designs. A microcontroller is a single-chip computer that integrates a CPU core, memory, and peripherals such as serial transceivers, timers, and I/O onto one die. The R8C/Tiny family from Renesas sits in the 8/16-bit embedded controller tier of the semiconductor hierarchy: MCU -> embedded controller -> integrated circuit -> semiconductor. Renesas positions the R8C/13 group as a high-efficiency 16-bit architecture aimed at industrial, consumer, and appliance control where code density and peripheral integration matter more than raw clock speed. Key features of the R5F21134FP#U0 include 20 MHz operation from the R8C/Tiny Series CPU core, 16 KB (16K x 8) Flash program memory in a flash-memory-version device, a 1 MB address space, a UART interface, and a watchdog timer. The high-performance silicon gate CMOS process supports the low-power, high-throughput behaviour expected of this family, and the 3/5 V compatibility range allows the same design to run from 3.3 V or 5 V rails. Technically, the R8C/13 core balances instruction efficiency with fast register-to-register execution, which reduces cycle counts for typical control loops. Because the part is a non-promotion device, it is intended for customers who already adopted the R8C/13 group; Renesas recommends the RL78/G14 group for new designs, so supply continuity should be confirmed before starting new platform development. Typical uses include compact motor and relay control, industrial sensor conditioning and monitoring nodes, appliance and instrumentation panels, and UART-connected peripherals such as RS-232 or CAN bridges. The 32-LQFP footprint also makes it attractive for cost-driven designs that need more pins than a small DFN package allows while staying under 8 mm on a side. When designing with this part, budget decoupling close to VCC and AVCC pins, keep the 32-pin LQFP layout free of thermal vias unless required, and confirm the UART peripheral count and pin multiplexing against the datasheet before committing the board. Supply is limited because the R8C/13 group is a non-promotion family, so securing stock early is advisable. This page consolidates distributor pricing, verified pin and package data, structured drop-in alternatives, and practical design guidance that is not assembled in the manufacturer datasheet, giving design engineers a single reference for sourcing decisions.

RFQ צור קשר

R5F21134FP#W4

R5F21134FP#W4 - 16-Bit 20MHz MCU | Renesas Electronics

The Renesas Electronics R5F21134FP#W4 is a 16-bit R8C/13-series microcontroller with a 20 MHz operating frequency, 16 KB of flash program memory, 1 KB of RAM, and 22 I/O pins in a 32-pin LQFP package. It is designed for embedded control applications requiring efficient instruction execution, mixed analog and digital peripheral integration, and a compact surface-mount footprint. The #W4 ordering code denotes the tape-and-reel packaging configuration. A microcontroller is the central control element of an embedded electronic system. It executes firmware, reads sensor inputs, manages actuators, and coordinates communication and timing functions. Within the semiconductor hierarchy, the R5F21134FP#W4 is a general-purpose microcontroller, part of the Renesas R8C/Tiny Series family, and is built around the R8C/13 CPU core. The R8C core uses a 16-bit architecture with instructions designed for efficient embedded-control operation. The principal device characteristics include 16 KB of flash memory, 1 KB of RAM, a maximum stated clock frequency of 20 MHz, and 22 general-purpose I/O pins. Its internal oscillator arrangement provides the timing basis for control firmware without requiring a separate clock source for basic operation. The 32-pin plastic molded LQFP package supports conventional surface-mount assembly and provides a practical upgrade path for compact embedded-control boards. Renesas identifies the R8C/13 Group as being supported for customers that previously adopted these products and recommends the RL78/G14 Group for new designs. That distinction matters during design planning: an existing R8C-based product may benefit from continued software and platform continuity, while a new project should evaluate the manufacturer-recommended RL78/G14 family against current availability, development-tool support, and qualification requirements. Typical implementation areas include industrial equipment controllers, building and environmental control systems, measurement instruments, compact consumer appliances, and embedded peripheral controllers. The 16 KB flash capacity is suitable for focused control firmware, while the 20 MHz operating rate supports responsive multitasking and time-based control logic. The 1 KB RAM and 22 I/O pins make the device most appropriate for designs where external memory or high-pin-count expansion is unnecessary. When designing around this device, verify the complete pin assignment, peripheral multiplexing, electrical limits, and programming procedure against the Renesas R5F21134FP datasheet. Confirm that all required timers, serial interfaces, analog functions, clock sources, and interrupt priorities are available on the selected 32-pin LQFP variant. PCB design should preserve access to programming and debug signals while providing appropriate decoupling and a stable clock arrangement. This product page consolidates the manufacturer family positioning, core specifications, package details, sourcing guidance, and practical selection considerations into one engineering reference. It also distinguishes verified device characteristics from design assumptions and identifies where engineers should consult the official datasheet before schematic release or firmware development.

RFQ צור קשר

R5F21142SP#U0

R5F21142SP#U0 16-Bit 20MHz 8KB MCU | Renesas Electronics

Renesas Electronics R5F21142SP#U0 is a 16-bit single-chip microcomputer in the R8C/14 family, operated at up to 20 MHz and supplied in a 20-pin LSSOP package. The verified product information identifies 8 KB of flash memory, a 16-bit R8C CPU core, and 3/5 V operation. The part is intended for embedded control applications that require a compact surface-mount microcontroller, modest on-chip flash, and a 20 MHz processing capability. It is a non-promotion R8C/14 Group device, so it is primarily relevant to systems already using the R8C platform. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, peripherals, and input/output functions in one package. The R8C/Tiny Series CPU core used by this device provides the execution environment for embedded control logic, while the 8 KB flash provides program storage for firmware. This MCU belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors used in industrial, consumer, and communication equipment. The R5F21142SP#U0 combines a 20 MHz maximum operating frequency with 16-bit processing and 8 KB flash in a 20-LSSOP package. Verified distributor information identifies the R8C/1x/14 family and describes the device as a 16-bit MCU with 8K x 8 flash. The package is identified as 20-LSSOP with a stated width of 4.40 mm. The available verified data does not specify RAM size, peripheral details, pin names, operating temperature, or electrical limits, so those values should be confirmed in the manufacturer datasheet before design release. The manufacturer describes the R8C/14 Group as using a high-performance silicon-gate CMOS process and an R8C/Tiny Series CPU core. It also states that the group is supported for customers that have already adopted these products, while recommending the RL78/G12 Group for new designs. This lifecycle statement is important when selecting a replacement for an existing R8C design because migration to a different MCU family may require software, toolchain, and board-level changes. Typical uses for this device include compact industrial controllers, peripheral controllers, instrumentation, and legacy embedded platforms where the existing R8C software and 20-LSSOP footprint are already established. The 3/5 V operating capability can support systems that need compatibility with conventional 3.3 V or 5 V logic environments. The available information does not identify a specific reference design or application circuit, so those applications should be treated as general application categories rather than manufacturer-qualified examples. For PCB design, confirm the exact 20-pin LSSOP land pattern, exposed-pad requirements, recommended decoupling, programming interface, and pin multiplexing against the official datasheet. Do not infer missing pin functions from the package outline. Because this is a non-promotion MCU, production planning should also verify lifecycle status, software-tool availability, and the availability of a suitable replacement before committing to new platform designs. This page consolidates the verified distributor and manufacturer information for R5F21142SP#U0, including pricing, package details, lifecycle context, sourcing links, and practical selection considerations. It distinguishes documented R8C/14 characteristics from parameters that remain unavailable in the supplied data, helping engineers make an evidence-based sourcing decision.

RFQ צור קשר

R5F21142SP#W4

R5F21142SP#W4 - 16-Bit 20MHz MCU | Renesas

Renesas Electronics R5F21142SP#W4 is a 16-bit R8C/1x/14 microcontroller operating at up to 20 MHz, with 8 KB of flash program memory, 512 x 8 bits of RAM, and 13 I/O ports in a 20-pin LSSOP package. The operating voltage range is 3 V to 5 V, and the device is supplied in tape-and-reel packaging for automated assembly. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, timers, and communication peripherals on one integrated circuit. The R5F21142SP belongs to the R8C/Tiny family of 16-bit embedded processors. It provides the basic control functions needed for compact industrial, consumer, appliance, and embedded-control products without requiring a separate processor and external interface components. Key features include a 20 MHz R8C CPU core, 8 KB of flash memory for program storage, 512 x 8 bits of SRAM, and 13 general-purpose I/O ports. The 3 V to 5 V supply range supports both 3.3 V and 5 V system architectures. An internal oscillator is specified, while the 20-LSSOP package measures approximately 4.40 mm in width and supports compact, surface-mount PCB construction. The silicon-gate CMOS implementation combines the R8C/Tiny CPU core with embedded flash memory and a low pin count. Its 16-bit architecture and instruction set are intended for embedded-control workloads where deterministic control, compact firmware, and low board area are more important than application-processor graphics performance. Program storage is sufficient for boot logic, state machines, communication handling, and peripheral coordination. Typical uses include small motor and actuator controllers, sensor-conditioning systems, appliance control panels, industrial sequencers, temperature controllers, and compact embedded-control modules. The 13 available I/O ports can support digital inputs, output functions, and external interfaces where the selected board configuration does not require more pins. Firmware and peripheral allocation must be checked against the complete manufacturer datasheet before assigning functions. Designers should follow the manufacturer’s recommended application circuit for power, decoupling, reset, clock, and programming connections. The 3 V to 5 V operating range and 20 MHz speed limit must both be respected when selecting external components and programming tools. Because this R8C/1x/14 group is intended for customers already using the product family, new projects should evaluate the manufacturer-recommended RL78/G12 series rather than assuming a feature-equivalent pin-compatible replacement. This product page consolidates the confirmed R5F21142SP#W4 specifications, sourcing information, package details, lifecycle guidance, and design considerations. It also distinguishes the verified 20-LSSOP device from recommended new-design families, helping engineers assess fit without implying that a cross-family controller is a drop-in replacement.

RFQ צור קשר

R5F21143SP#U0

R5F21143SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

The Renesas Electronics R5F21143SP#U0 is a 16-bit R8C/1x/14-series microcontroller operating at up to 20 MHz, with 12 KB of flash memory, in a 20-pin LSSOP package. It is designed for 3 V and 5 V embedded-control systems that require efficient instruction execution, compact packaging, and dedicated firmware support. The R8C/1x/14 group is a legacy product line recommended only for customers that have already adopted it. An R8C microcontroller is a single-chip embedded controller combining a processor core, flash program memory, data memory, timers, serial interfaces, and I/O resources. The R8C/1x/14 family belongs to the broader Renesas M16C and R8C/Tiny lineage of 16-bit microcomputers. Its CISC-style instruction architecture provides compact code execution for embedded products, while the 20 MHz operating rate supports responsive control of peripherals and communication tasks. The target device provides 12 KB of flash memory and a maximum clock frequency of 20 MHz. These characteristics make it suitable for compact consumer products, industrial controllers, instrument subsystems, and legacy equipment in which a modest code-memory budget and low pin count are more important than a large application-specific peripheral set. The manufacturer describes the family as using a high-performance silicon-gate CMOS process and an R8C/Tiny Series CPU core. The R5F21143SP#U0 is offered in a 20-pin plastic molded LSSOP package, which supports compact PCB construction while exposing the microcontroller's principal ports and control signals. Its operating supply range is 3 V to 5 V according to distributor product information, allowing integration into conventional embedded-control rails. Exact RAM, peripheral, timing, and electrical-limit details should be confirmed against the manufacturer datasheet before schematic capture or firmware qualification. Typical applications include small appliance controllers, sensor-conditioning systems, industrial automation modules, programmable control panels, and communication-enabled embedded products. Because this MCU belongs to a non-promotion family, it is most appropriate for maintaining an established design rather than starting a new platform when a currently promoted Renesas MCU family can satisfy the requirements. Engineers should preserve the established R8C/1x/14 board layout, clock configuration, memory map, and development-tool workflow when replacing an existing component. Review the pin-description table and electrical characteristics in the manufacturer datasheet before assigning I/O, selecting bypass capacitors, or changing the 3 V or 5 V supply configuration. This page consolidates the exact orderable MPN, core operating parameters, package identity, application guidance, lifecycle considerations, and same-family replacement options into an engineering-focused reference for legacy R8C/1x/14 designs.

RFQ צור קשר

R5F21144SP#U0

R5F21144SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

Renesas Electronics R5F21144SP#U0 is a 16-bit R8C/14 microcontroller operating at up to 20 MHz with 16 KB of flash program memory in a 20-pin LSSOP package. The device operates from 2.7 V to 5.5 V, provides a 10-bit four-channel ADC, and offers 13 general-purpose I/O pins. These characteristics make it suitable for compact embedded control systems requiring efficient 16-bit processing, on-chip flash storage, and mixed-signal measurement. A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripheral interfaces, and I/O ports on one integrated circuit. The R5C family belongs to the embedded-processor hierarchy and uses the R8C/Tiny Series CPU core. Compared with an 8-bit MCU, a 16-bit controller can perform arithmetic and address larger data structures more efficiently, while retaining the low cost, low power, and real-time control characteristics expected from a dedicated embedded controller. Key features include a 20 MHz maximum operating frequency, 16 KB flash program memory organized as 16K x 8, a four-channel 10-bit ADC, and an operating temperature range of -20°C to +85°C. Flash memory allows firmware to be programmed and updated without an external programmable memory device. The 20-LSSOP outline also supports compact PCB layouts where component density and a moderate pin count are important. The R8C/14 architecture is implemented using a silicon-gate CMOS process and incorporates a high-performance R8C/Tiny Series CPU core with instruction-efficient 16-bit operations. The target includes 13 I/O pins according to its listed device data, leaving sufficient interface capacity for digital control, communications, and analog monitoring. Exact clock, timer, and peripheral configurations should be confirmed against the manufacturer datasheet before final clock-tree and peripheral allocation. Typical uses include compact industrial controllers, consumer appliances, sensor-interfaces, programmable timers, and embedded equipment requiring modest computation and local data acquisition. The four ADC channels are useful for monitoring temperature, position, pressure, or analog control signals, while the 13 I/O pins support switches, indicators, actuators, and serial or bus-connected peripherals. Designers should plan decoupling, clock routing, programming access, and mixed-signal grounding carefully. Place input and output capacitors close to the supply pins, route analog inputs away from switching nodes, and preserve clear programming access. Because this R8C/14 group is a non-promotion family for existing adopters, new projects should also evaluate Renesas's recommended RL78/G12 path when long-term new-design support is a priority. This product page consolidates the verified device specifications, package information, lifecycle position, application guidance, and same-family drop-in options into a practical engineering reference. It also highlights the trade-off between preserving an installed R8C/14 design and moving a completely new design to the manufacturer-recommended RL78/G12 family.

RFQ צור קשר

R5F21152SP#U0

R5F21152SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

Renesas Electronics R5F21152SP#U0 is a 16-bit R8C microcontroller IC operating at up to 20 MHz, with 8 KB of flash memory organized as 8K x 8 and housed in a 20-pin LSSOP package. The device supports 3 V to 5 V operation and uses the R8C/Tiny-series CPU core. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device dedicated to embedded control. The R5C family belongs to the broader hierarchy of embedded processors and microcontrollers, allowing one compact component to execute control logic and manage digital interfaces, timing, communications, and system inputs. The R5F21152SP#U0 combines a 16-bit processing architecture with a 20 MHz operating speed and 8 KB of flash memory. Its 3 V to 5 V operating range supports both lower-voltage and 5 V industrial or consumer equipment. The 20-pin LSSOP outline offers a gull-wing, surface-mount format with a body width of approximately 4.40 mm, making it suitable for compact embedded-control boards. The R5C is a high-performance CISC core with an instruction set designed for efficient embedded operation and uses a silicon-gate CMOS process. Compared with a general-purpose processor, the device concentrates control-oriented functions into a smaller package, reducing the number of external components needed for basic sequencing, signal handling, and programmable logic tasks. Typical uses include industrial controllers, sensor-conditioning systems, motor-control interfaces, appliance control boards, and compact data-acquisition products. A designer can select the R5F21152SP#U0 when an application requires a 16-bit control architecture, 20 MHz performance, 8 KB of embedded flash, and a compact 20-pin package. Before finalizing the PCB, verify the complete pin assignment, clock configuration, programming interface, and external-component requirements against the manufacturer datasheet. Pay particular attention to supply decoupling and unused-pin handling, because correct implementation at these constraints is essential for reliable operation and repeatable firmware behavior. This page combines the core R5F21152SP#U0 specifications, package characteristics, sourcing guidance, and drop-in replacement analysis to support faster engineering decisions. It also highlights what must be checked when considering a substitute, particularly pin compatibility, flash capacity, operating voltage, clock rate, and peripheral configuration.

RFQ צור קשר

R5F21153SP#U0

R5F21153SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

Renesas Electronics R5F21153SP#U0 is a 16-bit R8C/Tiny Series microcontroller operating at up to 20 MHz, with 12 KB of Flash memory and 768 bytes of RAM, packaged in a 20-pin plastic molded LSSOP. Designed for compact embedded control systems, it combines a high-performance silicon gate CMOS implementation with an efficient instruction set and a 10-bit A/D converter. A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripherals, and input/output circuitry into one package. The R8C/Tiny Series core belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. It provides a compact implementation for industrial controls, sensor interfaces, appliances, instrumentation, and other applications requiring low-cost local processing. The R5F21153SP#U0 operates from a 3 V or 5 V supply and provides 12 KB of program Flash plus 768 bytes of RAM. Its 10-bit A/D converter supports analog measurements required by sensor and control systems. The 20-pin LSSOP package reduces board area compared with larger leaded packages, although its narrow lead pitch requires careful PCB layout and manufacturing controls. The device uses Renesas high-performance silicon gate CMOS technology and the R8C/Tiny Series CPU core. Sophisticated instructions improve execution efficiency, while the integrated Flash, RAM, analog conversion, and serial I/O support a compact embedded design without requiring several external devices. Typical system benefits include lower component count, reduced board area, and deterministic peripheral control. R5F21153SP#U0 is particularly suitable for small control panels, temperature-measurement equipment, motor and actuator controllers, simple instrument interfaces, and appliance control boards. The analog inputs can measure potentiometers, resistive sensors, and other slowly varying signals when paired with suitable external conditioning circuitry. For PCB implementation, place the decoupling capacitor at the supply pins with the shortest possible trace, maintain clearances appropriate for the LSSOP lead pitch, and route analog inputs away from switching nodes. Confirm oscillator, reset, programming, and peripheral configurations in the manufacturer datasheet before releasing production artwork. This page consolidates the Renesas product information, distributor identification, lifecycle guidance, and application-focused design guidance for engineers evaluating the R5F21153SP#U0. Renesas supports this R8C/15 device for customers that previously adopted it and recommends the RL78/G12 Group for new designs.

RFQ צור קשר

R5F21154SP#U0

R5F21154SP#U0 - 16-Bit 20MHz Flash MCU | Renesas Electronics

Renesas Electronics R5F21154SP#U0 is a 16-bit R8C/1x/15 flash microcontroller operating at up to 20 MHz with 16 KB of internal flash memory and a 20-pin LSSOP package. The device uses the R8C/Tiny Series CPU core, provides a 1 MB address space, and operates from a 3 V to 5 V supply according to the distributor and manufacturer information provided. Its flash version supports programming from a single power source, making it suitable for compact embedded-control designs that require deterministic 16-bit processing and on-chip program storage. A microcontroller is a semiconductor device that integrates a CPU core, memory, and peripheral functions into one package. The R8C/15 belongs to the R8C family of 16-bit embedded controllers, combining an embedded CPU, flash program memory, and general-purpose I/O in a compact surface-mount device. This hierarchy places the part within embedded processing while keeping the external component count and board area below that of a discrete processor design. Key verified features include a maximum operating frequency of 20 MHz, 16 KB organized as 16K x 8 flash, 16-bit CPU architecture, 1 MB memory space, 3 V to 5 V operation, and a 20-pin LSSOP package. The high-performance silicon gate CMOS process supports an efficient implementation, while single-power-source flash programming simplifies production programming and field firmware updates. The package is identified by distributor sources as 20-LSSOP, also described elsewhere as a 20-pin plastic molded LSSOP. Typical uses include compact industrial controllers, appliance-control boards, sensor-conditioning equipment, communication modules, and small consumer products. The 20 MHz R8C core provides useful processing headroom for protocol handling, state-machine control, and supervisory logic, while the integrated 16 KB flash eliminates a separate program-memory component in suitable designs. When designing around this MCU, verify the complete pin assignments, peripheral mix, and electrical limits in the Renesas datasheet before finalizing the PCB. Pay particular attention to supply decoupling, programming interface requirements, clock configuration, and unused-pin handling. Existing firmware should also be checked for clock, timer, and memory-map assumptions before replacing another MCU. This page consolidates verified distributor specifications, manufacturer product information, package details, sourcing links, and replacement guidance. It distinguishes the electrically and mechanically verified R5F21154SP family option from unverified substitutes so engineers can make a conservative, footprint-aware decision.

RFQ צור קשר

R5F21162SP#U0

R5F21162SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

Renesas Electronics R5F21162SP#U0 is a 16-bit R8C-series microcontroller operating at 20 MHz with 8 KB of flash memory in a 20-pin LSSOP package. Its 3/5 V operating class and 2.7 V to 5.5 V supply range make it appropriate for embedded control systems operating from standard low-voltage rails. The R8C/1x/16 architecture combines a compact 16-bit instruction set with dedicated microcontroller peripherals, making the device suitable for control, monitoring, signal processing, and communication-oriented designs. A microcontroller is an integrated semiconductor containing a processor core, program memory, data memory, timers, serial interfaces, and I/O circuitry on one package. Within the broader semiconductor hierarchy, the R5F21162SP#U0 belongs to the embedded-processing category and uses the R8C family of 16-bit microcontroller ICs. This integration reduces the component count required for a standalone controller while keeping the design centered on programmable firmware rather than fixed hardware logic. Three primary characteristics define this device: a 16-bit CPU, a 20 MHz operating frequency, and 8 KB of flash program memory. The 20 MHz clock provides useful processing headroom for responsive control loops and interrupt-driven tasks, while flash retains firmware when power is removed. The package is identified as 20-LSSOP, also marketed as 20-SSOP in distributor listings, and the lead-free marking identifies a Pb-free production configuration. The R5F21162SP#U0 is positioned for compact embedded systems where a small package, low-voltage operation, and dedicated microcontroller resources are more important than the storage capacity or peripheral scale of a high-end application processor. Its 8 KB flash capacity is best suited to firmware with tightly bounded functionality, such as dedicated appliance controllers, simple sensor nodes, industrial control modules, and compact peripheral interfaces. Typical design work involves assigning the available digital and analog functions, establishing a stable clock and reset path, and implementing firmware around the R8C core. Brownout monitoring, watchdog behavior, and power-consumption requirements should be evaluated in the final system because operating modes and firmware execution can materially affect the power budget. The principal layout consideration is the 20-LSSOP footprint, whose closely spaced leads demand careful track routing and reliable solder bridging control. Follow the pin-description and land-pattern tables in the manufacturer datasheet when assigning ports, supply pins, reset, clock, and programming signals. Confirm startup behavior and firmware timing with the configured operating frequency rather than treating the maximum clock rate as an automatic system setting. This page combines the exact ordering information, package identity, operating-class details, memory configuration, and practical design considerations for engineers evaluating the R5F21162SP#U0 in a new embedded-control design.

RFQ צור קשר

R5F21163SP#U0

R5F21163SP#U0 - 16-Bit R8C MCU, 12KB Flash | Renesas

The Renesas Electronics R5F21163SP#U0 is a 16-bit R8C/Tiny Series microcontroller with a 2.7 V to 5.5 V operating range, 12 KB of flash memory, and a 20-pin plastic molded LSSOP package. It is built with a high-performance silicon-gate CMOS process and uses the R8C/Tiny Series CPU core to provide instruction-efficient embedded control. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripherals into one compact device. The R8C/Tiny architecture belongs to the broader microcontroller hierarchy, where a general-purpose processor core is combined with embedded resources for control-oriented products. Its 16-bit architecture and compact package make the R5F21163SP#U0 suitable for industrial equipment, appliance controls, sensor interfaces, and compact automation modules. The R5F21163SP#U0 combines a 16-bit CPU core, 12 KB flash program memory, and a 3 V/5 V operating class in a 20-pin LSSOP package. The 2.7 V to 5.5 V operating range allows operation across common 3.3 V and 5 V systems. A lead-free 20-SSOP form factor also supports conventional surface-mount manufacturing and compact PCB layouts. Renesas describes the device as using sophisticated instructions developed for high instruction efficiency. The R8C/Tiny Series core is suitable for embedded products that need more control than a simple logic device but do not require the resources of a general-purpose application processor. The silicon-gate CMOS process provides the manufacturing foundation for the integrated low-power control functions. Typical applications include industrial control panels, motor and machine controllers, building equipment, appliance interfaces, and compact sensor nodes. The 20-pin package limits external connectivity, so projects requiring many I/O pins, high-speed communications, or large memory capacities should be evaluated against other members of the Renesas portfolio. The R8C/16 Group is positioned for continued support of existing designs rather than broad adoption in new projects. When designing around this MCU, preserve the voltage limits of every connected signal and decouple each applicable supply rail close to the device. Review the pin-description table in the manufacturer datasheet before assigning board functions because package availability alone does not establish pin compatibility. Firmware, peripheral configuration, startup behavior, and software tools should also be reviewed against the target revision. This product page combines the manufacturer’s device description with focused engineering guidance for sourcing, PCB implementation, lifecycle planning, and family selection. It also distinguishes true pin-compatible options from devices that merely share a similar package or memory size, helping engineers avoid replacements that require firmware, board, or connector changes.

RFQ צור קשר

R5F21164SP#U0

R5F21164SP#U0 - 16-Bit 20MHz Flash MCU | Renesas

Renesas Electronics R5F21164SP#U0 is a 16-bit R8C/1x/16 embedded microcontroller operating at up to 20 MHz, with 16 KB of flash memory and a 20-pin plastic molded LSSOP package. It operates from 3 V to 5 V and is built with a high-performance silicon gate CMOS process. These characteristics position it for compact embedded control, monitoring, communications, and general-purpose industrial designs that require efficient 16-bit instruction execution and integrated nonvolatile program memory. A microcontroller is a semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. In the product hierarchy, the R5F21164SP#U0 is an MCU, part of the broader embedded-processing and semiconductor category. Its R8C CPU core supports compact, instruction-efficient control software, while flash memory permits the programmed firmware to remain resident without an external memory chip. The 20-LSSOP package also keeps the footprint suitable for space-constrained boards. The device's principal specifications include a 16-bit R8C/1x/16 core, a 20 MHz maximum operating frequency, 16 KB of internal flash memory, and a 3 V to 5 V operating supply. Renesas describes the R8C/16 group as a non-promotion series supported for customers that previously adopted these products, with the RL78/G12 group recommended for new designs. This makes the MCU particularly relevant to maintenance and lifecycle-extension programs for established R8C platforms rather than first-generation greenfield projects. The R8C architecture emphasizes instruction efficiency and provides a practical balance between processing capability, memory organization, and low-cost embedded integration. Flash-programmable firmware storage simplifies field updates and avoids the need for a parallel external program-memory device in designs that fit within the internal memory capacity. The silicon gate CMOS process supports integration of the CPU, memory, and control peripherals in a compact molded package suitable for industrial electronics. Typical applications include industrial control panels, small motor and actuator controllers, sensor-interface nodes, programmable instruments, communication modules, and compact consumer or building-control products. In these systems, the MCU can execute control logic, monitor digital and analog inputs, manage outputs, and coordinate communications through its integrated peripherals. Its small package also helps reduce board area when compared with larger microcontroller packages. Designers should begin by checking the complete peripheral allocation, interrupt structure, memory map, and electrical limits in the manufacturer datasheet before assigning pins or designing the PCB. The 20-pin package constrains the number of simultaneously available I/O functions, so multiplexed peripheral assignments and board-level interface requirements deserve early validation. Software compatibility with existing R8C tools and established firmware should also be confirmed during component planning. This product page consolidates the manufacturer positioning, distributor identification, package information, verified operating characteristics, and practical selection guidance for engineers maintaining R8C-based equipment. It also distinguishes legacy-support considerations from the manufacturer's recommendation for RL78/G12 in new designs, helping procurement and engineering teams make an informed decision without confusing a functional MCU alternative with a verified pin-compatible replacement.

RFQ צור קשר

R5F21172SP#U0

R5F21172SP#U0 - 16-Bit 20MHz MCU, 8KB Flash | Renesas

Renesas Electronics R5F21172SP#U0 is a 16-bit R8C/1x/17-series microcontroller operating at up to 20 MHz with 8 KB of flash memory in a 20-pin plastic molded LSSOP package. It uses the R8C/Tiny Series CPU core, is manufactured using a high-performance silicon gate CMOS process, and operates from a 3 V to 5 V supply according to its distributor product classification. A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripheral interfaces, and control logic on one integrated circuit. The R8C family is designed for embedded control applications where compact code size, deterministic operation, low-power peripheral handling, and efficient 16-bit instruction processing are important. The R5F21172SP#U0 belongs to the R8C/17 group, which Renesas positions primarily for customers that have already adopted these products; the manufacturer recommends the RL78/G12 group for new designs. The device combines a 20 MHz maximum clock frequency with 8 KB, or 8K x 8 bits, of flash program memory. Its R8C/Tiny Series core uses a sophisticated CISC-style instruction set intended to improve execution efficiency. The 20-pin LSSOP format provides a relatively compact surface-mount package for embedded systems requiring digital control, serial communication, timing, and discrete input or output handling. The main architectural consideration is the balance between processing capability and resource constraints. At 20 MHz, the core supports responsive control-loop execution, while the 8 KB flash capacity constrains firmware size and encourages efficient peripheral integration. Because the R8C/17 group is a non-promotion family, engineers should avoid expanding its use in newly designed platforms unless an existing product lineage and software ecosystem justify continuing with it. Typical uses include compact industrial controllers, sensor-conditioning systems, appliance-control modules, programmable timers, and embedded serial-control equipment. A designer can use the MCU to coordinate analog front ends, digital sensors, communication peripherals, and actuator outputs while keeping the assembly small enough for a 20-pin surface-mount footprint. Design work should account for the limited 8 KB program space, the 3 V to 5 V operating range, and the vendor's non-promotion position. Firmware should be sized before PCB layout, and the selected development toolchain and peripheral configuration should be checked against the R8C/17 family documentation. Renesas directs new-product development toward the RL78/G12 group. This product overview consolidates the confirmed processor, memory, speed, voltage, package, and lifecycle information with design guidance, sourcing questions, and alternative-selection considerations. It also highlights the practical distinction between maintaining an existing R8C/17 design and selecting a currently recommended MCU platform for a new project.

RFQ צור קשר

R5F21174SP#U0

R5F21174SP#U0 - 16-Bit 20MHz MCU, 16KB Flash | Renesas

The Renesas Electronics R5F21174SP#U0 is a 16-bit R8C/Tiny Series microcontroller with a 20 MHz operating frequency, 16 KB of flash program memory, and 15 I/O ports, housed in a 20-pin plastic molded LSSOP package. It is designed for compact embedded-control systems requiring efficient instruction execution, broad I/O access, and operation from a 3.0 V to 5.5 V supply range. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces on one die. The R8C/17 Group belongs to Renesas's R8C/Tiny Series family of 16-bit embedded processors. Its architecture emphasizes instruction efficiency, making it useful for industrial controls, instruments, appliances, and compact automation products where deterministic control, modest memory requirements, and low component count are important. The R5F21174SP#U0 is aimed at systems already based on the R8C/17 platform. The device combines a 20 MHz R8C/Tiny CPU core with 16 KB of flash memory organized as 16K x 8 and 15 general-purpose I/O ports. The 3.0 V to 5.5 V operating range permits use in both 3.3 V and 5 V equipment. Its 20-pin LSSOP outline measures approximately 4.40 mm by 6.50 mm with a 0.65 mm lead pitch, supporting compact PCB layouts while preserving readily inspectable lead spacing. The manufacturer identifies the silicon implementation as high-performance silicon-gate CMOS. Renesas classifies this R8C/17 Group as supported for customers that have already adopted these products, while recommending the RL78/G12 Group for new designs. Consequently, R5F21174SP#U0 is primarily a continuation choice for established products rather than a preferred platform for greenfield development. Before extending an existing design, confirm software-tool support, peripheral availability, timing, and lifecycle plans against the current Renesas documentation. Typical applications include compact industrial controllers, sensor-conditioning systems, laboratory instruments, appliance control boards, data-acquisition modules, and embedded automation products. The small package, 16-bit processing capability, and moderate flash capacity make the MCU practical for single-board products with moderate computation and modest firmware size. A migration to another MCU may require changes to the startup code, peripheral configuration, memory map, and board layout. When designing around this MCU, reserve every supply pin for adequate decoupling and route high-current outputs carefully. Confirm oscillator, reset, and I/O constraints against the manufacturer datasheet before finalizing the PCB. Because this member is not promoted for new R8C/17 designs, evaluate lifecycle continuity and toolchain availability before committing to a new production program. This product page combines the manufacturer device characteristics, package information, lifecycle position, and a focused comparison of the closest identified same-package alternatives. It also adds selection guidance for maintaining an existing R8C/17 design while highlighting the need to verify pin, peripheral, and software compatibility before any substitution.

RFQ צור קשר

תת-קטגוריות

מוצרים (38,000+)

R5F21104FP#U0 - 16-bit 16MHz R8C MCU | Renesas

R5F21112FP#U0 - 16-bit 20MHz 8KB Flash MCU | Renesas

R5F21113FP#U0 - 16-Bit 20MHz R8C MCU | Renesas

R5F21113FP#W4 - 16-Bit 20MHz 12KB Flash MCU | Renesas

R5F21114FP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

R5F21114FP#W4 - 16-Bit R8C Microcontroller | Renesas

R5F21122FP#U0 - 16-Bit 16MHz R8C MCU | Renesas Electronics

R5F21124FP#U0 - 16-bit 16MHz 16KB Flash MCU | Renesas Electronics

R5F21132FP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

R5F21133FP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

R5F21134FP#U0 - 16-bit 20MHz R8C/13 MCU, 16KB Flash, 32-LQFP | Renesas

R5F21134FP#W4 - 16-Bit 20MHz MCU | Renesas Electronics

R5F21142SP#U0 16-Bit 20MHz 8KB MCU | Renesas Electronics

R5F21142SP#W4 - 16-Bit 20MHz MCU | Renesas

R5F21143SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

R5F21144SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

R5F21152SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

R5F21153SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

R5F21154SP#U0 - 16-Bit 20MHz Flash MCU | Renesas Electronics

R5F21162SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

R5F21163SP#U0 - 16-Bit R8C MCU, 12KB Flash | Renesas

R5F21164SP#U0 - 16-Bit 20MHz Flash MCU | Renesas

R5F21172SP#U0 - 16-Bit 20MHz MCU, 8KB Flash | Renesas

R5F21174SP#U0 - 16-Bit 20MHz MCU, 16KB Flash | Renesas