מעגלים משולבים

S912XD256J1MAA

S912XD256J1MAA - 16-Bit 80MHz 256KB MCU | NXP

The NXP S912XD256J1MAA is a 16-bit HCS12X embedded microcontroller rated at up to 80 MHz, with 256 KB of flash memory organized as 256K x 8 and an 80-lead QFP package measuring 14 x 14 mm. It is positioned for automotive-temperature embedded control applications that require deterministic processing, substantial embedded program storage, and a conventional gull-wing surface-mount footprint. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface blocks into one embedded-control component. The S912XD256J1MAA belongs to the HCS12X family and sits within the broader hierarchy of embedded processors and controllers, microcontrollers, and semiconductors. Its 16-bit architecture and 256 KB flash configuration provide a useful balance between code capacity and real-time control capability for automotive electronics. Verified distributor information identifies the device as an HCS12X microcontroller with a 16-bit CPU, 80 MHz maximum listed frequency, 256 KB flash memory, and an 80-QFP 14 x 14 mm package. The J1MAA ordering suffix is associated in distributor data with an automotive temperature grade. Additional electrical details such as supply voltage, RAM, EEPROM, peripheral mix, and temperature limits were not supplied in the verified dataset and therefore require confirmation from the manufacturer documentation before schematic capture. The 80-lead QFP package provides more external connection capacity than a small dual in-line package and supports integration with external memory, communications circuitry, sensors, actuators, and interface transceivers. Compared with a smaller microcontroller package, its 14 x 14 mm footprint offers many more available I/O and bus connections, but it also demands careful escape routing, adequate assembly clearance, and a larger land pattern on the printed circuit board. Typical uses include body, chassis, powertrain-adjacent, motor-control, vehicle-network, sensor-conditioning, and industrial embedded-control platforms where legacy software investment and 16-bit processing are important. The part should be selected only after confirming exact peripheral compatibility, memory map, clock configuration, electrical limits, and software-device identity through the authoritative HCS12X documentation. A practical design constraint is that software migration cannot be judged from clock speed alone. Engineers should verify controller revisions, peripheral modules, interrupt vectors, pin multiplexing, flash wait states, and toolchain support before committing to a redesign. This page combines verified distributor facts, sourcing context, and selection guidance while clearly separating parameters that still require manufacturer-datasheet confirmation.

RFQ צור קשר

S912XD64F2VAA

S912XD64F2VAA - 80MHz S12X MCU, 64KB Flash | NXP | Automotive

The NXP Semiconductors S912XD64F2VAA is a 16-bit HCS12X automotive-qualified microcontroller operating at up to 80 MHz, with 64 KB of flash program memory and 59 I/O pins in an 80-pin QFP package. Its -40°C to +105°C temperature range and integrated CAN bus, I²C, SCI, SPI, PWM, watchdog, low-voltage detection, and power-on reset peripherals suit demanding automotive and industrial-control systems. A microcontroller is an integrated semiconductor device that executes firmware, reads sensor inputs, controls actuators, and coordinates communication between electronic subsystems. The HCS12X architecture remains upward-compatible with the HCS12 instruction set while adding enhanced indexed addressing, an enhanced instruction set, interrupt stacking, and a programmer's model compatible with HCS12. Within the system hierarchy, this MCU combines real-time control, data processing, and serial communications in one device. The principal verified features are an 80 MHz maximum clock, 64 KB x 8 flash memory, 59 I/O pins, and an 80-pin QFP package. The listed connectivity includes CANbus, I²C, SCI, and SPI, while the peripheral set includes pulse-width modulation, a watchdog timer, low-voltage detection, and power-on reset. These resources reduce the need for external interface devices in body, vehicle, and industrial-control designs. Its 16-bit HCS12X core is designed for embedded control rather than host-class computing. The 64 KB flash budget provides room for application firmware, while 1 KB of EEPROM supports nonvolatile data storage. The MCU's mix of serial interfaces supports sensor networking, actuator control, diagnostics, and communication with external transceivers or modules. Typical uses include automotive body and chassis control, engine-adjacent control systems, industrial automation equipment, CAN-connected controllers, data-acquisition systems, and embedded motor-control platforms. The -40°C to +105°C range is especially relevant where components must operate across extended automotive thermal conditions. Designers should verify clock, memory, peripheral, reset, and pin assignments against the manufacturer datasheet before schematic capture. QFP-80 assembly also requires adequate PCB routing space, pin-1 identification, solderability planning, and thermal-conduction design. Because NXP identifies the part as end of life, long-term availability and legacy-system continuity should be confirmed before new production commitments. This page consolidates the verified manufacturer and distributor findings, distinguishes lifecycle risk from electrical suitability, and provides engineering-oriented selection guidance. It does not infer missing electrical limits or claim an unverified drop-in replacement where the available cross-reference evidence does not establish pin compatibility.

RFQ צור קשר

S912XDG128F2MAA

S912XDG128F2MAA - 16-bit HCS12X MCU 128KB Flash 80MHz QFP-80 | NXP

The NXP Semiconductors S912XDG128F2MAA is a 16-bit HCS12X family microcontroller featuring a CISC S12X core running at 80 MHz, 128 KB of Flash program memory, 12 KB of RAM, and a 4 KB EEPROM, housed in an 80-pin QFP (PQFP-80, 14x14 mm) surface-mount package. An HCS12X microcontroller is a 16-bit CISC MCU that extends the legacy HCS12 instruction set with an instruction queue, enhanced indexed addressing, an extended instruction set, and a fully HCS12-compatible interrupt stack and programmer's model. S12X parts integrate a peripheral co-processor (XGATE) on higher-end variants and target automotive body, chassis, and powertrain applications where deterministic interrupt latency and CAN connectivity are required. They sit within the broader taxonomy: microcontroller -> embedded MCU -> automotive-qualified MCU -> 16-bit CISC MCU -> HCS12X family. Key specifications include a 2.5V/5V supply interface, 59 programmable I/O lines, on-chip LVD, POR, PWM and watchdog timers, and a connectivity block combining CANbus, I2C, SCI, and SPI. The part is rated for the automotive -40C to +125C ambient operating range and ships in a PQFP-80 tray. Lifecycle status is End of Life / Not For New Designs per the NXP product page, so it is being sourced from authorized distributors and authorized aftermarket suppliers such as Rochester Electronics for existing designs. The S912XDG128F2MAA combines a von-Neumann core with Harvard-style bus structures for the XGATE co-processor on related derivatives, enabling efficient DMA-style peripheral transactions. The 80 MHz bus clock and 128 KB Flash support complex state machines and LIN/CAN gateway stacks typical of body control modules. Typical applications include automotive body control modules, HVAC and instrument cluster controllers, CAN/LIN gateways, industrial PLCs, and safety-critical sensor interfaces that require AEC-Q100 grade 0 (or higher) qualification. The wide temperature range also suits under-hood and chassis-mounted ECUs. When designing in this part, confirm supply longevity with your NXP field representative: as an EOL/Not-For-New-Designs component, plan last-time-buy volumes and verify second-source alternatives such as S912XEG128MAA or S912XEQ384J3CALR that share the QFP-80 footprint. Allow generous input-bulk capacitance because the integrated LVD/POR block does not substitute for board-level decoupling of the 2.5V and 5V rails. This page consolidates distributor pricing, automotive-grade and cross-reference drop-in alternatives, and design notes not found in the standalone NXP datasheet to support both new engineering decisions and EOL procurement planning.

RFQ צור קשר

S912XDG128F2MAL

S912XDG128F2MAL - 16-bit 80MHz 128KB MCU | NXP | Automotive

The NXP Semiconductors S912XDG128F2MAL is a 16-bit HCS12X automotive microcontroller with a 128KB (128K x 8) Flash, 12KB RAM, 80MHz bus performance, and 91 general-purpose I/O lines, housed in a 112-pin LQFP (20x20 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory (Flash), data memory (RAM), and peripherals such as timers, serial interfaces, and ADCs into one chip. Within the powertrain and body-electronics hierarchy, the MCU sits at the center of the electronic control unit (ECU), orchestrating sensors, actuators, and communication buses. The HCS12X family extends NXP's (formerly Freescale Semiconductor) widely adopted HCS12 architecture with an enhanced instruction set and a co-processor (XGATE) concept for concurrent I/O processing. Key features of the S912XDG128F2MAL include the 16-bit HCS12X CISC CPU that is upward compatible with the HCS12 instruction set, identical interrupt stacking and programmer's model, an instruction queue, enhanced indexed addressing, and an enhanced instruction set. Automotive qualification (AEC-Q100), a -40 to +125 degC operating range, and a 2.5V/5V supply regime make it suitable for harsh vehicle environments. Architecturally, the device belongs to the S12X DG sub-family, pairing 128KB of on-chip Flash with 12KB of RAM. The enhanced core executes from a queue that smooths bus bandwidth, while upward HCS12 compatibility allows existing code bases to migrate with minimal changes - an important benefit for long-lifecycle automotive platforms. Typical applications include automotive body control modules, gateway nodes, instrument clusters, HVAC controllers, and industrial control systems that require a proven 16-bit core with Flash-based reprogrammability and robust EMC behavior. When designing with this part, plan for Flash programming voltage and oscillator configuration early, and verify errata against your mask-set, since the device is now marked End of Life by NXP. This page synthesizes distributor pricing tiers, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

S912XDG128F2MALR

S912XDG128F2MALR - 16-bit S12X MCU 128KB Flash 80MHz | NXP

The NXP S912XDG128F2MALR is a 16-bit HCS12X microcontroller built around the S12X CPU core, delivering 80 MHz of processing throughput with 128 KB of embedded Flash and integrated peripherals in a 112-pin LQFP package. It is qualified for automotive applications with an operating temperature range of -40 °C to +125 °C, and is designed to replace legacy HCS12 designs while preserving the HCS12 instruction set for upward compatibility. What is an HCS12X microcontroller? An HCS12X MCU is an enhanced variant of the Freescale/NXP HCS12 family that adds an instruction queue, enhanced indexed addressing, interrupt stacking identical to the HCS12, and an extended instruction set. Positioned in the broader taxonomy, S12X sits between the simpler HCS12 and the higher-end S12XE family, eventually giving way to the S32K ARM Cortex-M automotive line. As a 16-bit MCU, it is widely used in body controllers, instrument clusters, and industrial node controllers where deterministic interrupt response and a stable, long-lived tool chain matter more than raw MHz. Key features of the S912XDG128F2MALR include 128 KB of Flash, 8 KB of RAM (typical for the family), an integrated XGATE co-processor for peripheral offload, a 10-bit ADC, multiple SCI/SPI/I2C channels, and a CAN 2.0 module for in-vehicle networking. The 80 MHz core delivers roughly 2× the throughput of a stock HCS12 while keeping the same memory map, easing migration of existing HCS12 firmware. The 112-pin LQFP (20 × 20 mm) package exposes ample I/O for body and chassis applications and provides good thermal performance for the on-chip analog and CAN peripherals. Compared with smaller QFP variants in the same family, the 112-pin device typically unlocks the full set of timer/PWM channels, the XGATE signals, and the extended address/data bus. Typical applications include automotive body control modules, HVAC controllers, instrument clusters, door/seat/lighting modules, industrial CAN nodes, and LIN master/slave gateways. The combination of CAN 2.0, SCI/SPI and the XGATE engine is well-suited to multi-node vehicle networks. When designing with this device, allocate the XGATE vector table in non-paged Flash so that interrupts are serviced deterministically, and verify the 112-pin pinout against the family reference manual because smaller pin-count variants in the same family omit several peripheral pins.

RFQ צור קשר

S912XDG128F2VAA

S912XDG128F2VAA - 16-bit S12X MCU 128KB Flash 80MHz 80-QFP | NXP

The NXP Semiconductors S912XDG128F2VAA is a 16-bit HCS12X microcontroller delivering 80 MHz CPU performance with 128 KB on-chip Flash program memory in an 80-pin LQFP (14x14 mm) package, qualified for the -40C to +105C automotive temperature range. The HCS12X core extends the classic HCS12 architecture with an enhanced indexed addressing mode, larger instruction queue, and an upward-compatible instruction set that allows existing HCS12 code to migrate without rewrite. The 128 KB Flash is organized as 128K x 8 with in-application reprogramming support, and the device integrates RAM, EEPROM, and a rich set of on-chip peripherals including SCI, SPI, I2C, timers, and a 10-bit ADC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working memory (RAM), non-volatile data storage (EEPROM), and a configurable set of digital and analog peripherals. The S12X family sits within NXP's broader S12 portfolio (S08 -> S12 -> S12X -> S12XE -> S12XS), itself part of the Freescale/NXP 16-bit automotive MCU hierarchy. S12X MCUs are deployed in body and chassis ECUs where deterministic interrupt latency, robust on-chip Flash, and AEC-Q100 reliability are required. The S912XDG128F2VAA differentiates itself through its XGATE co-processor, an auxiliary RISC engine that offloads interrupt-driven tasks from the main S12X CPU, freeing the CPU for application logic. Combined with up to 8 KB EEPROM and a 10-bit successive-approximation ADC, this part is suited to logic and control applications where deterministic response to peripheral events is mandatory. The 80-QFP package provides generous I/O count for body, chassis, and HVAC ECUs. Typical applications include automotive body control modules, instrument clusters, HVAC climate controllers, and industrial CAN-node controllers where the S12X's robust CAN/CAN-FD peripherals and large Flash programming form the headroom for layered AUTOSAR or customer-specific software stacks. Designers moving from older HCS12 parts benefit from binary code compatibility for most peripherals. Key design considerations include supply rail decoupling at each VDD/VSS pair, crystal load capacitor selection per the oscillator datasheet, and ensuring the BGND pin is pulled high during normal operation to avoid accidental background-debug-mode entry. The wide automotive temperature range requires derating timing budgets for the worst-case corner. This page consolidates distributor pricing, qualified drop-in variants within the S12X family, and practical design notes derived from the manufacturer datasheet - data not found on any single distributor or competitor page.

RFQ צור קשר

S912XDG128F2VAL

S912XDG128F2VAL - 16-bit S12X MCU, 128KB Flash, 112-LQFP | NXP

The NXP S912XDG128F2VAL is a 16-bit HCS12X microcontroller with 128KB of Flash program memory, an 80 MHz CPU core, and 91 general-purpose I/O pins, housed in a 112-pin LQFP package (20x20 mm). It integrates an HCS12X core fully upward compatible with the HCS12 instruction set and a rich peripheral set including CAN, SCI, SPI, and I²C. A microcontroller (MCU) is a single-chip processor that combines a CPU core, program and data memory, and configurable peripherals on one die. The HCS12X family is the 16-bit flagship of NXP's legacy Freescale HCS12 line; it adds an instruction queue, enhanced indexed addressing, and an enhanced instruction set while remaining source-compatible with HCS12 code. The S12X core sits in the automotive microcontroller hierarchy between HCS12 (8-bit-like, 16-bit bus) and the higher-end PowerPC-based MPC5xxx devices. Key features of the S912XDG128F2VAL include 128KB of Flash, 2KB of EEPROM, 8KB of RAM (per the S12XD family datasheet), an 80 MHz maximum bus frequency, and an automotive-grade temperature rating of -40°C to +105°C. The HCS12X core uses interrupt stacking and a programmer's model identical to HCS12, simplifying migration of legacy S12 code. An integrated XGATE co-processor (typical of the S12XD sub-family) offloads interrupt-driven I/O, improving aggregate throughput. Typical application areas include automotive body and chassis control, industrial CAN nodes, HVAC controllers, instrument clusters, and sensor-fusion ECUs. The combination of CAN bus, PWM, and an LVD/POR block makes it well-suited to 12V automotive electrical systems. With 91 GPIO and 5V-tolerant I/O, it can directly drive actuator drivers and read analog/digital sensor inputs. When designing with this part, ensure your toolchain supports the S12X instruction set (CodeWarrior, Cosmic, IAR). Plan for a 112-LQFP footprint with adequate thermal copper for the -40°C to +105°C automotive range. The pin-compatible variants S912XET256 and S912XDT256 in the LQFP-112 footprint enable easy memory upgrades without PCB rework. Source quotes show this part remains active in distributor inventory as of 2026-10-21, though lifecycle status should be re-verified before long-lifecycle automotive programs.

RFQ צור קשר

S912XDG256F1CAL

S912XDG256F1CAL - 80MHz 256KB Flash Automotive MCU | NXP

The NXP Semiconductors S912XDG256F1CAL is a 16-bit S12X automotive microcontroller with 256 KB of Flash, 80 MHz maximum operating frequency, 91 programmable I/O pins, and a 112-pin LQFP package. The supplied product data identifies it as automotive qualified and specifies operation from -40°C to +85°C. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one device. In the system hierarchy, the S912XDG256F1CAL belongs to the embedded-microcontroller class rather than a general-purpose processor or DSP. Its S12X core supports HCS12-compatible programming while adding an enhanced instruction set, indexed addressing, and a four-stage instruction queue. Key resources include 256 KB of Flash, 14 KB of RAM, 4 KB of EEPROM, 91 programmable I/O pins, and 12 timer/counter channels. Communication peripherals listed in the verified data include one CAN interface and three SPI interfaces, with I2C support also identified. These resources allow the MCU to consolidate distributed control, communications, timing, and input/output functions on a single device. The S12X architecture targets complex embedded-control tasks requiring deterministic peripherals and real-time responsiveness rather than desktop-class computing. At up to 80 MHz, it provides substantially more processing headroom than slower general-purpose 16-bit controllers. Exact clock-tree, electrical-limit, peripheral-function, and pin-assignment details require confirmation in the complete manufacturer documentation. Typical applications include automotive body and chassis controllers, engine-adjacent control modules, transmission or braking electronics, industrial automation equipment, CAN-based distributed nodes, and compact embedded systems that require substantial Flash memory. The automotive-qualified ordering code makes it most relevant to designs operating across the stated -40°C to +85°C range. Design planning should begin with the complete NXP datasheet and reference manual, especially because this part is marked End of Life. Verify package dimensions, pin multiplexing, supply voltage, reset behavior, clock requirements, CAN termination, and all peripheral electrical limits before layout release. New production designs should also evaluate current NXP MCU options because lifecycle risk may outweigh drop-in reuse benefits.

RFQ צור קשר

S912XDG256F1MAA

S912XDG256F1MAA - 16-Bit 80MHz HCS12X MCU 256KB Flash | NXP

The NXP S912XDG256F1MAA is a 16-bit microcontroller from the HCS12X family, featuring a 256KB Flash program memory and a maximum CPU clock of 80 MHz, supplied in an 80-pin QFP (14x14 mm) surface-mount package. It is rated for the -40°C to +125°C automotive operating temperature range and is AEC-Q100 automotive qualified, making it appropriate for under-the-hood and other harsh-environment automotive body and powertrain electronics. The S912XDG256F1MAA integrates a rich set of peripherals suited for automotive body and chassis applications, including CAN (MSCAN), SPI, SCI, and multiple timer modules, providing deterministic real-time control and robust in-vehicle networking. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, communication interfaces (UART, SPI, I2C, CAN), and analog blocks. HCS12X microcontrollers extend the legacy HCS12 architecture by adding an enhanced indexed addressing mode, an instruction queue, a richer instruction set, and interrupt stacking identical to the HCS12 programmer's model, while remaining upward object-code compatible with the HCS12 instruction set. Within the broader taxonomy, the S912XDG256F1MAA belongs to: 16-bit MCU -> HCS12X family -> automotive MCU -> embedded microcontroller -> semiconductor IC. This hierarchy allows engineers to map it to reference designs, software libraries, and toolchains shared across the wider S12X platform. Key features of the S912XDG256F1MAA include 256KB on-chip Flash memory (256K x 8), 80 MHz maximum bus frequency, automotive-grade temperature range, and integration of MSCAN, SCI, SPI and PWM peripherals. The device supports background debug mode (BDM) for in-circuit emulation and non-intrusive debugging, plus on-chip voltage regulator and oscillator options that simplify system-level bill of materials. The S912XDG256F1MAA's S12X core uses a 16-bit CPU with an XGATE co-processor (depending on variant) and 22-bit memory addressing, providing deterministic interrupt response critical for body and powertrain control. AEC-Q100 qualification allows direct deployment in safety-related modules such as steering, braking and engine management, where the part must withstand voltage transients and thermal stress per automotive standards. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC controllers, seat and door zone modules, and CAN/J1939 networked sensor nodes. Industrial applications include factory automation controllers and PLCs that benefit from the same automotive robustness and the broad S12X tool ecosystem (CodeWarrior, S32 Design Studio IDE). When designing with this device, allocate PCB area for an 80-pin QFP footprint (14x14 mm body) and decoupling capacitors close to all VDD/VSS pin pairs. Verify supply tolerance versus the on-chip regulator's input range and confirm that BDM interface lines are accessible for production programming. Always verify voltage and peripheral mappings against the latest NXP datasheet before committing to layout. This page synthesizes distributor pricing, drop-in S12X family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר

S912XDG256F1MAL

S912XDG256F1MAL - 16-Bit 80MHz 256KB MCU | NXP

The NXP Semiconductors S912XDG256F1MAL is an automotive-qualified 16-bit HCS12X microcontroller with 256 KB of flash memory, an 80 MHz operating frequency, and a 112-pin LQFP package measuring 20 mm by 20 mm. It is designed for embedded automotive and industrial systems that require deterministic control, integrated serial communications, and extended-temperature operation. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, peripherals, and interface logic on one device. The S12X family extends the HCS12 architecture with an enhanced instruction set, enhanced indexed addressing, and an interrupt model compatible with the HCS12 programmer's model. These features place the device in the broader 16-bit embedded MCU hierarchy rather than application processors or FPGAs. Verified source data identifies a 256K by 8 flash configuration, 80 MHz maximum operating frequency, HCS12X core, SPI capability, automotive qualification, and a temperature range from -40 °C to +125 °C. A secondary component listing reports 14 KB RAM, 4 KB EEPROM, one CAN interface, three SPI interfaces, and an 80-pin HQFP configuration for a related MC9S12XD256CAA device. Those secondary values are not assigned to this exact 112-pin target because package-specific verification remains necessary. The S12X platform is appropriate for powertrain accessories, body electronics, gateways, sensors, and industrial controllers when a deterministic 16-bit architecture is preferred. SPI can connect serial sensors, transceivers, memories, and display or communication modules, while flash storage supports embedded firmware. The key selection constraint is lifecycle status: NXP's product page identifies this exact MPN as end of life, so new production designs should require an explicit supplier confirmation, last-time-buy assessment, or approved lifecycle migration. For a new PCB, verify the 112-pin pad pattern, all multiplexed peripheral functions, supply rails, clock configuration, and software compatibility against the official datasheet before schematic release. Do not substitute a lower-pin-count HQFP MCU or a different core without board redesign and firmware validation. Inventory shown by brokers or distributors does not by itself establish manufacturer availability. This page consolidates verified product identity, lifecycle information, source discovery links, and design cautions. It deliberately avoids treating generic search-tool results as proof of pin-compatible replacement parts. Because no same-package, pin-to-pin substitute was established from the supplied cross-reference results, procurement should verify any claimed alternative with NXP documentation and application engineering review.

RFQ צור קשר

S912XDP512J1CAG

S912XDP512J1CAG - 16-bit S12X MCU, 512KB Flash, 80MHz, 144-LQFP

The NXP Semiconductors S912XDP512J1CAG is a 16-bit HCS12X microcontroller built on the S12XD family core, featuring 512KB of Flash memory, 80MHz CPU clock speed, and a 144-pin LQFP package measuring 20x20mm. It belongs to NXP's automotive-qualified S12X series with an operating temperature range of -40C to +85C and offers a rich peripheral set including SCI, SPI, IIC, CAN, and PWM modules suitable for automotive body and chassis applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals onto one silicon die. The HCS12X family extends the classic HCS12 instruction set with enhanced indexed addressing, a 4-byte instruction queue, and interrupt stacking identical to HCS12, enabling upward code compatibility. Within NXP's taxonomy, HCS12X sits in the 16-bit MCU tier below 32-bit PowerPC and Cortex-M devices, but above 8-bit HC08/HC(S)08 families - targeting cost-sensitive real-time control applications where deterministic interrupt latency and ample on-chip peripherals outweigh raw MHz. Key features of the S912XDP512J1CAG include 32KB of RAM, 4KB of EEPROM, an Enhanced Capture Timer (ECT), up to 8 PWM channels, two CAN 2.0 A/B controllers, multiple SCI/UART ports, SPI and IIC interfaces, an 8-channel 10-bit or 12-bit ADC, and on-chip voltage regulator with 2.5V core. The 144-LQFP package exposes the full S12XD peripheral complement including external bus interface for expanded memory. The S12XD architecture uses a pipelined CPU with separate program and data buses, allowing simultaneous Flash fetches and SRAM accesses - effectively doubling throughput compared to the original HCS12. The XGate peripheral coprocessor (configurable on S12XD variants) offloads interrupt-driven tasks such as CAN message handling, freeing the main CPU for control loops. The enhanced indexed addressing and instruction queue support C compilers efficiently, while retaining HC12 assembly compatibility for legacy code reuse. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC controls, body lighting, seat controllers, door modules, and industrial CAN-node controllers. The dual-CAN interface and large Flash footprint also suit CAN-based diagnostic gateways in heavy machinery, agricultural equipment, and electric vehicle auxiliary systems where AEC-Q100 grade is required. When designing with this MCU, allocate careful PCB real-estate to the 144-LQFP footprint (20x20mm body, 0.5mm pitch) and ensure four-layer routing with adequate ground pour under the exposed pad for thermal management. The internal 2.5V voltage regulator requires decoupling on VDDX/VSSX and VDDR/VSSR pins to support stable core operation up to 80MHz. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical S12XD design notes not consolidated on any single manufacturer or distributor page, helping engineers evaluate S912XDP512J1CAG for new designs and locating qualified equivalents for ongoing production.

RFQ צור קשר

S912XDP512J1CAGR

S912XDP512J1CAGR - 16-bit S12X MCU, 512KB Flash, 80MHz, 144-LQFP | NXP

The NXP S912XDP512J1CAGR is a 16-bit HCS12X microcontroller featuring an S12X core running at 80 MHz, with 512 KB of Flash program memory and 32 KB of RAM, housed in a 144-pin LQFP package (20x20 mm). It supports 119 digital I/O pins and integrates dual CAN, SCI, SPI, and I2C communication interfaces, making it well suited for automotive body, chassis, and industrial control applications. Background: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and a range of peripherals such as timers, ADCs, and communication controllers. The S12X family from NXP is a 16-bit CISC architecture derived from the original HC12, with the X-variant adding an enhanced XGate coprocessor and improved memory management for deterministic real-time control in automotive ECUs. Key features include 4 KB of EEPROM for parameter storage, 8-channel 10-bit and 16-channel 10-bit ADC, PWM with up to 8 channels, plus low-voltage detect (LVD), power-on reset (POR), and a watchdog timer (WDT) for safety-critical operation. The S12X instruction set is source-compatible with the legacy HC12, easing migration of existing 16-bit code bases while doubling the typical throughput. Typical applications span automotive body control modules (BCM), instrument clusters, HVAC controllers, lighting modules, industrial PLCs, and CAN/J1939 networked nodes. The dual-CAN interface and 119 GPIO count allow direct connection to multiple sensor and actuator networks without external bus expanders, reducing BOM cost. When designing with this device, ensure the 5V supply is well decoupled with bulk and 100 nF ceramics near each VDD/VSS pair. Configure the PLL mode to 80 MHz only with a stable 4 MHz crystal; verify lock status in software before switching to PLL clock. For automotive EMC compliance, place the CAN transceivers close to the MCU and use a common-mode choke on the bus lines. This page synthesizes distributor pricing from DigiKey/Mouser/Octopart, cross-references for drop-in alternatives within the S12X family, and practical design notes not collected in the manufacturer datasheet alone.

RFQ צור קשר

S912XDP512J1MAL

S912XDP512J1MAL - 16-Bit S12X 80MHz MCU, 512KB Flash | NXP

The NXP S912XDP512J1MAL is a 16-bit HCS12X CISC microcontroller built on the S12X core, integrating 512 KB of Flash memory and operating at up to 80 MHz, housed in a 112-pin LQFP package (20 mm x 20 mm). It targets automotive and industrial applications requiring deterministic real-time control combined with substantial on-chip memory, and is AEC-Q100 qualified with an extended -40 C to +125 C operating range. The part accepts 2.5 V or 5 V supply rails typical of automotive body and powernet systems. A microcontroller (MCU) is a single-chip computer integrating a CPU, program and data memory, peripherals, and I/O on one silicon die. Within the broader hierarchy of semiconductor devices, an MCU sits inside the microcontroller > processor > logic IC > integrated circuit taxonomy. The HCS12X core extends the legacy HCS12 instruction set with an instruction queue, enhanced indexed addressing modes, and an enhanced instruction set while remaining upward-compatible with HCS12 software; it adds interrupt stacking identical to HCS12 so existing toolchains and programmer's models port cleanly. This combination allows migration of mature HCS12 firmware onto a higher-performance CPU without rewriting low-level drivers. Key features include 512 KB on-chip Flash, 32 KB (or equivalent) on-chip RAM, four msCAN modules for CAN 2.0 A/B networking, multiple SPI/IIC/SCI peripherals, an Enhanced Capture Timer (ECT) module, PWM channels, a 10-bit Analog-to-Digital Converter (ATD), and on-chip voltage regulator / oscillator. The device supports background debug (BDM) for non-intrusive in-system programming and a robust set of interrupts suitable for engine, chassis, or body controllers. The 112-pin LQFP footprint provides generous analog and digital I/O for body-control I/O multiplexing. Architecturally, the S12X combines a 16-bit CPU with a programmable XGATE co-processor (on equivalent members of the family) for offloading interrupts and peripheral servicing, freeing the main CPU for application logic. Program and data Flash share the array, and the integrated voltage regulator supports single-rail 5 V designs typical of 12 V automotive environments. Typical applications include automotive body control modules, instrument clusters, HVAC controllers, CAN-based sensor nodes, motor control front-ends, and industrial automation platforms requiring AEC-Q100 reliability. A drop-in lower-grade alternative (S912XDP512J1CAL, -40/+85 degC) is available for non-automotive programs. When designing, ensure the application's worst-case junction temperature stays below the qualification limit and provide adequate decoupling on VDDR/VSS. This page synthesizes distributor pricing and parametric drop-in alternatives beyond the manufacturer summary, helping engineers qualify substitutes quickly.

RFQ צור קשר

S912XDT256F1CAA

S912XDT256F1CAA - 16-Bit 80MHz 256KB MCU | NXP

NXP Semiconductors S912XDT256F1CAA is a 16-bit HCS12X microcontroller operating at 80 MHz, with 256 KB of embedded Flash memory in an 80-pin QFP package measuring 14 x 14 mm. According to the verified NXP product data, it is intended for industrial embedded systems, supports the -40 °C to +85 °C temperature range, and is described as automotive qualified. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals in one package. The S12X belongs to the HCS12 family and provides an upgrade path from the HCS12 instruction set through its upward-compatible core, interrupt stacking, programmer model, indexed addressing, and instruction queue. This architecture places it between a simple 8-bit controller and more complex 32-bit microcontrollers while retaining deterministic embedded-control characteristics. Verified headline features include a 16-bit S12X core, 80 MHz operation, 256 KB of Flash, a 14 x 14 mm 80-QFP package, and the listed connectivity options of CANbus, EBI/EMI, I²C, and SPI. Search snippets also identify 16K x 8 RAM for the device. The combination of local program memory, serial interfaces, and a 16-bit bus-oriented core makes the part suitable for controllers requiring substantial embedded code rather than basic keypad or LED logic. The S912X designation places this device in NXP's S12X family, while the 256 portion of the ordering code identifies its 256 KB Flash configuration. Its 80 MHz rating provides a 62.5 ns nominal CPU clock period. This calculation does not imply that every peripheral or external interface runs at 80 MHz; bus clocks, timers, serial interfaces, and flash access timing remain subject to the device configuration and manufacturer documentation. Typical uses include automotive body and chassis electronics, industrial controllers, CAN-connected equipment, data acquisition modules, and embedded systems combining SPI or I²C sensors with external memory. The -40 °C to +85 °C range supports industrial-temperature operation, while the verified automotive-qualified description broadens its potential use in rugged vehicle electronics. Final qualification still depends on the exact ordering variant and application-specific requirements. For new hardware, verify the complete 80-pin symbol and exposed-power requirements against the manufacturer datasheet before layout. Existing legacy designs should preserve the original S12X memory map, oscillator configuration, watchdog strategy, and pin multiplexing. Since the part is marked End of Life on NXP's product page, long-term production programs should secure supply and qualify any replacement independently rather than assuming functional equivalence from the package number alone. This page combines verified lifecycle, core, memory, package, interface, temperature, and sourcing information with design-oriented selection guidance. It also distinguishes confirmed facts from missing details instead of inferring pin assignments, electrical limits, pricing, or peripheral specifications that were not supplied in the source data.

RFQ צור קשר

S912XDT256F1CAL

S912XDT256F1CAL - 16-bit S12X MCU 256KB 80MHz | NXP

The NXP S912XDT256F1CAL is a 16-bit automotive-qualified HCS12X (S12X core) microcontroller delivering 80 MHz bus performance, 256KB of on-chip Flash memory, and integrated XGATE co-processor functionality in a 112-pin LQFP (20x20 mm) surface-mount package, rated for -40C to +85C operation. A 16-bit microcontroller is a single-chip computing device whose CPU processes 16-bit-wide instructions and data, sitting between entry-level 8-bit MCUs and 32-bit MCUs in the embedded hierarchy. The HCS12X family from NXP (originally Freescale Semiconductor) is an upward-compatible evolution of the widely adopted HCS12 architecture, retaining the same interrupt stacking and programmer model while adding an instruction queue, enhanced indexed addressing, and an expanded instruction set. Key features of the S912XDT256F1CAL include the 16-bit S12X CISC CPU operating at 80 MHz, 256KB (256K x 8) of Flash program memory, automotive-grade qualification, and industrial temperature coverage to +85C. The device is pin-compatible within the S12XD family, allowing Flash-size migration between variants on the same PCB. Peripherals in the S12XD family (such as CAN, SCI, SPI, and PWM modules) support typical automotive and industrial networking workloads. The S12X core uses a CISC architecture with an instruction queue that improves bus utilization, and the enhanced indexed addressing modes reduce code size in control loops. The XGATE peripheral co-processor available on S12XD devices offloads interrupt servicing and communication handling from the main CPU, effectively boosting real-time throughput without raising core frequency. Typical applications include automotive body control modules, gateway nodes, HVAC controllers, and industrial automation systems where a proven, qualified 16-bit platform with CAN connectivity is required. The -40C to +85C industrial range suits under-hood adjacent and factory-floor environments. Design consideration: this part is marked End of Life by NXP, so new designs should plan a migration path to the S12XE/S12XS families or NXP 32-bit parts, while existing designs can secure last-time-buy stock. This page synthesizes distributor availability data, drop-in family alternatives, lifecycle status, and practical design notes not found in a single manufacturer source.

RFQ צור קשר

S912XDT256F1MAL

S912XDT256F1MAL - 16-bit MCU, 256KB Flash, 80MHz | NXP

The NXP Semiconductors S912XDT256F1MAL is a 16-bit HCS12X microcontroller built on the S12X core, integrating 256KB of on-chip Flash and 16KB of RAM, operating at a 80MHz bus frequency. The device is housed in a 112-pin LQFP (20x20 mm) package with an automotive operating temperature range of -40C to +125C. It is supplied in Tray packaging and is qualified to AEC-Q100 standards for automotive and industrial environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), and a rich set of peripherals (timers, ADC, communication interfaces, GPIO) into one IC. The HCS12X is a 16-bit CISC architecture that is upward-compatible with the original HCS12 instruction set, adding an instruction queue, enhanced indexed addressing, and interrupt stacking identical to the HC12 programmer's model. Within NXP's product hierarchy, this device falls under 16-bit microcontrollers -> MCUs -> microcontrollers & processors -> semiconductors. The S12XD family specifically adds an XGATE coprocessor (DMA-style offload engine) to accelerate interrupt-driven I/O handling, which is critical in body and chassis automotive modules. Key features include the 256KB (256K x 8) program Flash, 16KB on-chip RAM, 80MHz maximum CPU frequency, multiple communication peripherals (CAN, SPI, SCI, I2C), enhanced capture timers, 8/10-bit ADC channels, and a JTAG/BDM debug interface. The wide -40C to +125C automotive-grade temperature range supports deployment in under-hood automotive ECUs, body controllers, and industrial automation PLCs. The S912XDT256F1MAL uses a unified Flash memory architecture with hardware ECC, supports in-application programming (IAP), and integrates an XGATE peripheral coprocessor that runs at twice the core speed for high-throughput interrupt servicing. The device also includes an enhanced periodic interrupt timer, pulse width modulator (PWM) outputs, and on-chip voltage regulation for single-supply operation. Typical applications include automotive body control modules, CAN-based chassis networks, industrial sensor aggregation nodes, building automation controllers, and any 16-bit embedded design that requires automotive-grade temperature tolerance combined with deterministic interrupt handling. When designing with this device, ensure adequate decoupling on the VDD/VSS pins (typically 100nF ceramic capacitors per supply pin placed as close to the IC as possible) and verify timing margins for CAN bus communication in noisy environments. The BDM debug interface should be brought out to a header for firmware development and field upgrades. This page synthesizes distributor stock and pricing, drop-in-compatible S12XD family alternatives, and practical design notes not found in the standalone NXP datasheet.

RFQ צור קשר

S912XDT256F1MALR

S912XDT256F1MALR - 16-bit MCU, 256KB Flash, 80MHz | NXP

The NXP S912XDT256F1MALR is a 16-bit HCS12X microcontroller with 256KB Flash memory, 80 MHz CPU speed, and automotive-grade temperature range (-40C to +125C), housed in a 112-pin LQFP (20x20 mm) package. It is a Tape-and-Reel packaged variant of the S912XDT256F1MAL designed for high-throughput automotive body and powertrain applications, delivering deterministic interrupt handling for safety-critical control loops. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, plus a rich set of peripheral interfaces (timers, ADC, communication controllers, GPIO) into one IC. The S912XDT256F1MALR belongs to the HCS12X family, an enhanced superset of the legacy HCS12 instruction set that preserves source-code compatibility while adding an instruction queue, enhanced indexed addressing, and interrupt stacking identical to the HCS12 programmer's model. In a broader taxonomy the device sits within the hierarchy microcontroller -> embedded processor -> semiconductor IC. Key features include 256KB of on-chip Flash program memory, 16KB of RAM, 80 MHz bus speed, the S12X CPU with efficient peripheral co-processing (XGATE co-processor typically available on this family), on-chip CAN, SCI, SPI, IIC, PWM, and a 12-bit ADC. The automotive temperature grade, AEC-Q100 compliance, and 5V-tolerant I/O make it well suited for engine-control units, body controllers, and gateway modules. An integrated background-debug-mode (BDM) interface allows in-circuit programming and real-time debug without an expensive emulator. The S12X core pairs a CISC-style CPU with a RISC-style peripheral co-processor that offloads interrupt-intensive tasks, freeing the main CPU to run control loops. Automotive qualification against AEC-Q100 and a junction temperature envelope supporting -40C to +125C enable placement in underhood or transmission-mounted ECUs. Extensive timer resources, an ATD (analog-to-digital) module, and CAN 2.0A/B controllers address powertrain messaging and analog sensor acquisition directly. Typical applications include engine and transmission control units, body control modules, gateway and chassis controllers, automotive HVAC controllers, and brushed DC motor control for seat or window actuators. Any vehicle network node requiring CAN connectivity and deterministic real-time response benefits from the S12X architecture. When designing with this device, allocate decoupling capacitors (typically 100 nF) close to every VDD/VSS pin pair and observe the 112-LQFP land pattern exactly - alternate pin-compatible S12X parts in different package styles are NOT drop-in for this footprint. Use the free NXP CodeWarrior or S32 Design Studio toolchains and the BDM interface for initial programming. This page synthesizes distributor pricing, S12X family drop-in alternatives, and practical PCB-layout notes not consolidated in the NXP datasheet.

RFQ צור קשר

S912XDT256F1VAA

S912XDT256F1VAA - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP

The NXP Semiconductors (formerly Freescale) S912XDT256F1VAA is a 16-bit HCS12X-family microcontroller built around the S12X CPU core, delivering 80MHz of CPU clock, 256KB of on-chip Flash, 14KB RAM and 4KB EEPROM in a 80-pin QFP (14x14 mm) automotive-grade package. It features the enhanced XGATE co-processor for I/O offload, dual CAN 2.0 A/B controllers, three SPI, eight SCI/UART, two I2C and a 16-channel 10-bit ADC, with an operating voltage range of 2.5V to 5.5V and a -40C to +105C industrial/automotive temperature rating. Background: A 16-bit MCU (microcontroller unit) is a single-chip computer integrating a processor, volatile and non-volatile memory, and configurable peripherals on one die. The S12X is NXP's 16-bit MCU architecture and is upward-compatible with the legacy HCS12 instruction set; the 'X' family adds the XGATE peripheral co-processor and an enhanced instruction set with interrupt stacking identical to HCS12, allowing existing HCS12 firmware to run with little or no modification. Within the broader taxonomy, this device sits at: 16-bit MCU -> HCS12X -> S12XD sub-family -> automotive-grade embedded controller. Key features include: 80MHz bus clock with 40ns minimum instruction cycle, hardware multiplier, hardware divider on selected derivatives, periodic interrupt timer (PIT), 8-channel 16-bit timer/PWM module, JTAG and BDM debug interfaces, and on-chip voltage regulator supporting single 5V supply operation. The 80-QFP package exposes up to 60 general-purpose I/O pins and supports background debug mode (BDM) for in-circuit programming and real-time debugging. Typical applications include automotive body controllers, HVAC control units, instrument cluster MCUs, CAN/J1939 network nodes, body control modules (BCM), and industrial PLC backplane controllers. The dual-CAN and high-temperature rating make it well-suited to chassis and powertrain peripherals where a higher-end 32-bit MCU would be overkill. Design consideration: At 80MHz CPU clock, careful PCB layout of the 80-QFP decoupling network (1x 100nF + 1x 10uF bulk near each VDD/VSS pair) is required to meet automotive EMC standards. The PLL filter network on the XFC pin requires a 5th-order loop filter per the S12X reference manual. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר

S912XDT256J1MAA

S912XDT256J1MAA - 16-Bit 80MHz 256KB MCU | NXP

The NXP Semiconductors S912XDT256J1MAA is a 16-bit HCS12X microcontroller operating at up to 80 MHz, with 256 KB of embedded flash memory, supplied in an 80-pin QFP package measuring 14 mm by 14 mm. It belongs to the S12X automotive microcontroller family and combines a high-performance core, embedded memory, and external peripheral connectivity in a surface-mount package. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and I/O resources on one device. In the broader hierarchy, this MCU is an embedded processor and a semiconductor component designed for deterministic control, monitoring, communications, and automotive electronics. Its 16-bit architecture is suited to embedded tasks requiring efficient code execution, peripheral control, and real-time behavior without the complexity of a desktop processor. The verified distributor record identifies the part as an HCS12X device with 256 KB organized as 256 K by 8 bits of flash memory. It is listed at 80 MHz and in an 80-QFP package. A related Mouser listing for S912XDT256F1MAA identifies an S12X core, 256 KB flash, 80 MHz operation, and an automotive-qualified variant, but that related MPN is not treated as proof of every characteristic of S912XDT256J1MAA. Typical uses for this device family include automotive body and chassis electronics, motor and actuator control, sensor conditioning, vehicle communication modules, and industrial embedded controllers. The large pin count supports organized connections to external sensors, transceivers, memory, debug interfaces, and power-management circuitry. The 80-pin QFP also exposes more signal and interface resources than a smaller low-pin-count MCU package. Designers should select this part only after checking the manufacturer datasheet for memory map, peripherals, electrical limits, clocking, package drawings, exposed pads, and recommended application circuits. Because the supplied search results do not include a manufacturer PDF for the target MPN, the official datasheet URL and complete pin-level electrical specification set remain to be obtained. This page combines the verified distributor attributes with explicit data-availability notes rather than inferring unprovided values. This data record is intended to support procurement, initial architecture selection, and distributor comparison. It also identifies why the part belongs to the HCS12X embedded-control class, while preserving the distinction between verified facts and parameters that must be confirmed in the official technical documentation.

RFQ צור קשר

S912XDT384J1MAG

S912XDT384J1MAG - 16-bit S12X MCU, 384KB Flash, 80MHz | NXP

The NXP S912XDT384J1MAG is a 16-bit microcontroller from the S12X family featuring an HCS12X CPU core with 384KB of on-chip Flash memory and 80MHz maximum CPU clock, housed in a 144-pin LQFP (LFQFP) package. It is automotive-qualified (AEC-Q100) and operates across the -40C to +125C automotive temperature range, supporting 2.5V/5V supply rails for mixed-voltage system designs. A 16-bit MCU (microcontroller unit) is an integrated circuit containing a CPU core, program memory, RAM, and peripherals on a single die. The S12X architecture extends the classic HCS12 instruction set with an instruction queue, enhanced indexed addressing, and an enhanced instruction set, while remaining upward-compatible with the HCS12 programmer's model. MCUs in this class serve as the central processing element in automotive body, chassis, and powertrain ECUs, as well as industrial control modules. Key features of the S912XDT384J1MAG include the HCS12X CPU delivering 80 MIPS performance, 384KB of Flash for application code and data storage, multiple communication peripherals (typically including CAN, SPI, SCI, and I2C), a 16-bit timer module, and an external bus interface for memory expansion. The 144-pin LQFP package provides ample I/O for complex automotive networks, and the wide operating voltage range supports both 5V legacy and 3.3V peripheral domains. The S12X core uses a CISC architecture with an instruction queue that prefetches opcodes, enabling 80MHz operation while maintaining code-density advantages of the HCS12 instruction set. The interrupt stacking and programmer's model are identical to HCS12, allowing existing HCS12 firmware and toolchains to migrate with minimal code changes. Typical applications include automotive body controllers, gateway modules, lighting controllers, HVAC control units, and industrial CAN nodes. The 384KB Flash tier suits applications with substantial calibration tables or multiple software variants. When designing with this part, plan the CAN bus termination and ESD protection per automotive requirements. Decouple each VDD/VSS pair with a 100nF ceramic capacitor placed within 5mm of the pin, and route the external bus signals with matched impedance if high-speed external memory is attached. This page combines distributor pricing, drop-in alternatives from the same S12X family, and design considerations specific to the S912XDT384J1MAG, offering information beyond what the manufacturer datasheet alone provides.

RFQ צור קשר

S912XDT512J1CAA

S912XDT512J1CAA - 16-bit HCS12X MCU 512KB Flash 80MHz QFP-80 | NXP

The NXP S912XDT512J1CAA is a 16-bit HCS12X microcontroller with 512 KB of Flash memory, an 80 MHz CPU, and a wide peripheral integration in an 80-pin QFP (14x14 mm) package qualified to -40C/+85C industrial and automotive-grade temperature ranges. It belongs to the MC9S12XD family and is upward object-code compatible with the legacy HCS12 instruction set while adding an instruction queue, enhanced indexed addressing, and interrupt stacking identical to HCS12, so existing HC12 firmware ports with minimal rework. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for code, RAM for data), and peripherals such as timers, ADC, communication controllers, and GPIO into one device. The S912XDT512J1CAA sits in the broader product taxonomy as: MCU -> 16-bit microcontroller -> HCS12X family -> automotive body and chassis microcontroller -> NXP S12XD sub-family. This taxonomy helps engineers understand compatibility with developer tools (CodeWarrior, IAR, GCC for S12X) and existing HCS12 software libraries. Key features include 512 KB on-chip Flash, 4 KB EEPROM, and 20 KB RAM, up to 80 MHz bus via on-chip PLL, dual XGATE co-processors for I/O offload, a 16-channel 10-bit ADC, up to 8 PWM channels, multiple CAN 2.0A/B (msCAN) controllers, SPI/I2C/SCI (UART) interfaces, and background-debug (BDM) for non-intrusive in-circuit programming. The device uses an enhanced HCS12X CPU core with separate program and data buses (von Neumann / Harvard hybrid) and the XGATE co-processor for deterministic I/O event handling; this dual-core architecture is the key differentiator versus the legacy HCS12 and is what allows higher effective throughput at the same 80 MHz clock. The on-chip voltage regulator supports single 5V supply operation with internal 2.5V core generation. Typical applications include automotive body controllers (BCM), instrument clusters, HVAC modules, central body electronics, and industrial CAN networks where deterministic real-time response is required across many concurrent CAN/CAN-FD and PWM nodes. Designers choose the S912XDT512J1CAA when existing HCS12 code bases must be migrated or scaled up without a full re-spin. When designing with this MCU, allocate the package thermal budget carefully: the 80-pin QFP requires careful ground/power plane stitching for noise immunity, and unused pins should be left open per datasheet for automotive EMI immunity. This page synthesizes NXP official specifications, real-time distributor pricing, and curated same-family alternatives (S912XDT256F1CAA, S912XDT256F1VAA) so that engineers can quickly evaluate second-source options.

RFQ צור קשר

S912XEA128BCAA

S912XEA128BCAA - 16-Bit 50MHz 128KB MCU | NXP

The NXP S912XEA128BCAA is a 16-bit HCS12X microcontroller with an S12X CPU, 50 MHz bus speed, 128 KB of Flash memory, and a 32-bit S12X XGATE co-processor. It is supplied in an 80-pin QFP package measuring 14 mm by 14 mm. Verified product information identifies it as automotive qualified and specifies a -40 °C to +85 °C operating range. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The HCS12X family sits within the embedded-control hierarchy: microcontroller, embedded processor, semiconductor, and electronic component. The S12X core is suited to real-time motor, communications, and industrial-control tasks, while the XGATE co-processor can execute independent peripheral or data-handling tasks and improve overall throughput. Key verified features include a 50 MHz S12X CPU, a 128 K × 8 Flash configuration, and an XGATE co-processor. The listed integrated peripherals include a 12-bit ADC with a 3 µs conversion time, an enhanced capture timer, a periodic interrupt timer, and a real-time interrupt timer. Programmable hardware-emulated EEPROM adds flexible nonvolatile-data capability, while the memory protection unit and supervisor/user modes support system integrity and software isolation. The S12X architecture combines a 16-bit main CPU with the independent XGATE co-processor. This architecture is useful when motor-control loops, communication servicing, or time-critical input capture must coexist with background processing. The 128 KB Flash footprint provides enough on-chip program storage for many embedded control applications, although RAM size, supply voltage, and detailed electrical limits are not present in the supplied data. Typical applications include automotive body and motion-control modules, industrial automation controllers, CAN-based equipment, motor controllers, and real-time sensor-processing systems. The -40 °C to +85 °C range supports industrial-temperature designs, and the distributor listing explicitly identifies the device as automotive qualified. Developers should still verify the exact qualification class and production requirements against the official NXP documentation. For PCB design, the 14 mm by 14 mm 80-pin QFP requires fine-pitch assembly and careful thermal and fanout planning. Decoupling, ground continuity, clock stability, programming access, and unused-pin treatment must follow the complete NXP hardware manual because those values are not available in the verified excerpts supplied here. This page consolidates the verified NXP and distributor descriptions, distinguishes documented capabilities from missing engineering data, and adds selection guidance for engineers evaluating the S912XEA128BCAA. It does not invent substitute parts or treat merely similar microcontrollers as drop-in replacements without verified pin compatibility.

RFQ צור קשר

S912XEG128BMAA

S912XEG128BMAA - 16-bit 50MHz S12X MCU 128KB Flash | NXP

The NXP S912XEG128BMAA is a 16-bit HCS12X microcontroller running at 50 MHz with 128 KB of on-chip Flash memory and an integrated XGATE co-processor, housed in an 80-pin QFP (14x14 mm) package rated for the automotive temperature range (-40 °C to +125 °C). It features 59 general-purpose I/O lines, a 12-bit ADC with 3 µs conversion time, and a rich connectivity set including CAN, SCI, SPI, I²C, IrDA, and EBI/EMI, making it a workhorse for body and chassis automotive ECUs. What is an HCS12X microcontroller? The HCS12X is NXP's enhanced 16-bit CISC microcontroller family derived from the original HC12 architecture, augmented with the XGATE peripheral co-processor - an independent RISC-like engine that offloads interrupt-driven tasks from the main CPU to boost effective system throughput. Within the broader hierarchy, the S912XEG128BMAA sits as a Flash-based MCU -> 16-bit microcontroller -> automotive microcontroller -> embedded processor, where it bridges low-cost 8-bit designs and higher-end 32-bit automotive microcontrollers. Key features include 128 KB of Flash with hardware-emulated EEPROM capability, system integrity via a Memory Protection Unit (MPU) and supervisor/user modes, an Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), Pulse Width Modulation (PWM) outputs, and on-chip Low-Voltage Detection (LVD) and Power-On Reset (POR). The wide supply range (3.3 V / 5 V dual-voltage operation simplify migration between classic and emerging parts. From an architectural standpoint, the dual-core CPU/XGATE topology lets the main S12X core handle application logic while XGATE services high-speed peripherals such as CAN message buffering and PWM updates, reducing main-CPU interrupt overhead. The 50 MHz bus, 12-bit ADC, and CAN interface together enable deterministic closed-loop control typical of body-electronics modules. Typical applications include automotive body controllers, instrument clusters, HVAC climate control, sensor conditioning, and industrial CAN nodes. The automotive-grade qualification (AEC-Q100 context) supports deployment under hood and in cabin. When designing with this MCU, allocate sufficient decoupling (100 nF plus 4.7 µF bulk) near the supply pins and follow NXP's AN128-Q-B-S application note guidance for PCB layout. The XGATE firmware must be loaded into a reserved Flash region, so plan the linker map accordingly. This page synthesizes verified distributor pricing, pin-compatible alternatives, and design notes not duplicated on the manufacturer datasheet, providing a single, citable engineering reference.

RFQ צור קשר

S912XEG128J1CAL

S912XEG128J1CAL - 16-Bit 128KB MCU, 112-LQFP | NXP

The NXP Semiconductors S912XEG128J1CAL is a 16-bit HCS12X microcontroller with 128KB flash memory and a 112-terminal industrial-temperature LQFP package. The verified product listing identifies 112 gull-wing terminals, a square QFP package, and a 20 mm by 20 mm LQFP-112 form factor. Its S912XEG128 designation places it in the S912X device family, while the L suffix in S912XEG128J1 identifies the performance grade shown in the verified data. A microcontroller is an embedded-computing semiconductor that integrates a processor core, program memory, data memory, peripherals, and interface circuitry into one package. The HCS12X family belongs to the broader MCU and embedded-processor hierarchy. Engineers use MCUs to implement real-time control, communications, sensing, and actuator logic without requiring a separate general-purpose processor. In this part, the verified data confirms a 16-bit architecture and 128KB (128K x 8) flash, which provide the core program-storage foundation for embedded control firmware. The supplied listing identifies the S912XEG128J1CAL as an industrial-temperature component. Its LQFP-112 package exposes substantially more connection points than a small QFP, supporting the broader peripheral and signal requirements of a complex embedded controller. The square gull-wing package is suitable for automated surface-mount assembly, while its 112 terminals provide dense routing capacity around the device. The verified data does not establish the complete peripheral list, core frequency, RAM capacity, or individual pin functions, so those values require confirmation from the official manufacturer documentation. Typical uses for this controller include industrial equipment, automotive or transportation electronics, communications equipment, and embedded automation systems where a 16-bit MCU and 128KB flash are appropriate. The architecture can support real-time control loops and firmware-heavy peripheral coordination. Exact suitability depends on clock speed, memory map, electrical limits, peripheral availability, and package-level pin compatibility, none of which are fully provided in the verified dataset. A key design consideration is that LQFP-112 assembly demands careful PCB fanout, decoupling, and signal-integrity planning. Because the package has a 20 mm by 20 mm footprint, route escape for 112 terminals and verify the manufacturer's recommended land pattern before layout release. Do not substitute a mechanically similar part without confirming pin names, power rails, clock pins, programming interfaces, and software-device mapping. This page consolidates the verified distributor findings for S912XEG128J1CAL, identifies the 16-bit HCS12X architecture, 128KB flash configuration, industrial temperature grade, and 112-LQFP package, and separates confirmed data from specifications that still require manufacturer confirmation. It also records candidate sourcing links and explains why a complete drop-in replacement list cannot responsibly be asserted from the available cross-reference results.

RFQ צור קשר

תת-קטגוריות

מוצרים (38,000+)

S912XD256J1MAA - 16-Bit 80MHz 256KB MCU | NXP

S912XD64F2VAA - 80MHz S12X MCU, 64KB Flash | NXP | Automotive

S912XDG128F2MAA - 16-bit HCS12X MCU 128KB Flash 80MHz QFP-80 | NXP

S912XDG128F2MAL - 16-bit 80MHz 128KB MCU | NXP | Automotive

S912XDG128F2MALR - 16-bit S12X MCU 128KB Flash 80MHz | NXP

S912XDG128F2VAA - 16-bit S12X MCU 128KB Flash 80MHz 80-QFP | NXP

S912XDG128F2VAL - 16-bit S12X MCU, 128KB Flash, 112-LQFP | NXP

S912XDG256F1CAL - 80MHz 256KB Flash Automotive MCU | NXP

S912XDG256F1MAA - 16-Bit 80MHz HCS12X MCU 256KB Flash | NXP

S912XDG256F1MAL - 16-Bit 80MHz 256KB MCU | NXP

S912XDP512J1CAG - 16-bit S12X MCU, 512KB Flash, 80MHz, 144-LQFP

S912XDP512J1CAGR - 16-bit S12X MCU, 512KB Flash, 80MHz, 144-LQFP | NXP

S912XDP512J1MAL - 16-Bit S12X 80MHz MCU, 512KB Flash | NXP

S912XDT256F1CAA - 16-Bit 80MHz 256KB MCU | NXP

S912XDT256F1CAL - 16-bit S12X MCU 256KB 80MHz | NXP

S912XDT256F1MAL - 16-bit MCU, 256KB Flash, 80MHz | NXP

S912XDT256F1MALR - 16-bit MCU, 256KB Flash, 80MHz | NXP

S912XDT256F1VAA - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP

S912XDT256J1MAA - 16-Bit 80MHz 256KB MCU | NXP

S912XDT384J1MAG - 16-bit S12X MCU, 384KB Flash, 80MHz | NXP

S912XDT512J1CAA - 16-bit HCS12X MCU 512KB Flash 80MHz QFP-80 | NXP

S912XEA128BCAA - 16-Bit 50MHz 128KB MCU | NXP

S912XEG128BMAA - 16-bit 50MHz S12X MCU 128KB Flash | NXP

S912XEG128J1CAL - 16-Bit 128KB MCU, 112-LQFP | NXP