מוצרים (44,000+)

STM8S105K4U6A - 16MHz 8-Bit MCU | STMicroelectronics
STM8S105K4U6A

STM8S105K4U6A - 16MHz 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S105K4U6A is an 8-bit STM8S access-line microcontroller operating at 16 MHz, with 16 KB of Flash program memory and integrated true data EEPROM in a 32-pin UFQFPN package measuring 5 mm by 5 mm. It combines an 8-bit MCU core with a 10-bit ADC, general-purpose timers, UART, SPI, and I2C communication interfaces. An 8-bit microcontroller is a compact embedded-processing device designed to execute firmware, monitor inputs, control outputs, and manage system interfaces. Within the product hierarchy, the STM8S105K4U6A belongs to the STM8S family, STM8 access-line microcontrollers, and the broader category of 8-bit MCU semiconductor devices. The STM8S105x4 and STM8S105x6 access lines cover configurations with 16 KB or 32 KB of Flash memory and provide integrated true EEPROM for parameter storage. The principal features of this device are its 16 MHz maximum operating frequency, 16 KB Flash memory, 10-bit ADC, integrated EEPROM, and extensive serial-interface support. The 5 mm by 5 mm UFQFPN package supports compact PCB layouts where a smaller land pattern is important. Its operating voltage range supports both 3.3 V and 5 V system designs, according to the manufacturer product information. The STM8S105K4U6A uses the STM8 8-bit CISC architecture and belongs to the STM8S medium-density device group identified in reference manual RM0016. Its mixed-signal and communications resources allow one controller to handle analog measurement, timing functions, serial data exchange, and embedded control without requiring separate interface ICs for every function. Typical applications include compact sensor transmitters, appliance controls, small motor controllers, industrial monitoring modules, digital panel controls, and low-cost communication equipment. The combination of ADC, EEPROM, UART, SPI, and I2C is particularly useful in designs that acquire analog measurements, retain configuration data, and communicate with sensors, actuators, or host systems. PCB design should follow the manufacturer's pin and land-pattern guidance, provide the required decoupling close to the supply pins, and route exposed-pad connections according to the package thermal design. Firmware and peripheral configuration should be checked against RM0016 and the STM8S105x4/6 device documentation to avoid errors involving alternate functions, timers, ADC channels, or communication interfaces. This page consolidates the exact orderable MPN, core memory and frequency details, interface capabilities, sourcing information, application guidance, and practical comparison considerations into a focused engineering reference for designers evaluating the STM8S105K4U6A.

RFQ צור קשר
STM8S105K6B6 - 8-Bit 16MHz 32KB MCU | STMicroelectronics
STM8S105K6B6

STM8S105K6B6 - 8-Bit 16MHz 32KB MCU | STMicroelectronics

The STMicroelectronics STM8S105K6B6 is an 8-bit STM8S series microcontroller operating up to 16 MHz, with 32 KB of Flash program memory and a 32-pin SDIP package. The device also provides integrated EEPROM, 25 I/O pins, mixed-signal acquisition, timers, and serial connectivity. It is positioned for compact embedded control, sensing, communications, and motor-control systems requiring an 8-bit MCU with integrated memory and peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, memory, input/output ports, timers, and communication peripherals on one device. The STM8S105K6B6 belongs to the STM8S access-line family: an 8-bit MCU platform intended for compact control systems where deterministic peripheral access, low component count, and simple embedded software development are important. Its 32 KB Flash provides room for application firmware, while integrated data EEPROM supports parameter storage and calibration data. The verified specifications identify a 16 MHz operating frequency, 32 KB Flash organized as 32K × 8, 2K × 8 RAM, 25 I/O pins, and a 10-bit ADC. The verified sources also identify UART, SPI, I2C, timers, and mixed-signal acquisition capabilities. These peripherals allow the MCU to connect sensors, communicate with external controllers, generate timing signals, and perform basic analog measurements without requiring several discrete support devices. The STM8S105K6B6 is packaged in a 32-SDIP through-hole format with a stated 0.400-inch, 10.16 mm package dimension. Through-hole construction can simplify prototype assembly, inspection, and manual rework compared with fine-pitch surface-mount packages. The device is suitable for applications such as compact motor controllers, industrial sensing modules, communication interfaces, and embedded automation products, provided the firmware and board design are verified against the manufacturer datasheet. Designers should verify supply voltage, clock configuration, peripheral pin multiplexing, ADC accuracy, reset behavior, and programming requirements against the manufacturer datasheet before release. The 8-bit architecture and 32 KB Flash footprint are appropriate for focused control tasks, but software memory planning is essential when combining multiple communication protocols and control functions. Verify exact electrical limits and package details before using the device as a drop-in replacement for another MCU. This page consolidates verified distributor specifications, official manufacturer information, pricing context, sourcing links, and engineering guidance. It does not infer unprovided electrical limits, pin names, lifecycle claims, or alternative-device compatibility. For production use, confirm the current manufacturer datasheet, package drawing, programming toolchain, and distributor inventory.

RFQ צור קשר
STM8S105K6T6C - 16MHz 8-Bit MCU, 32KB Flash | STMicroelectronics
STM8S105K6T6C

STM8S105K6T6C - 16MHz 8-Bit MCU, 32KB Flash | STMicroelectronics

The STMicroelectronics STM8S105K6T6C is an 8-bit STM8S access-line microcontroller operating at 16 MHz, with 32 KB of Flash program memory and integrated true data EEPROM in a 32-pin LQFP tray package. It supports operation from 3.3 V to 5 V, making it suitable for compact embedded-control systems that require deterministic performance and a broad peripheral set in a moderate-size surface-mount footprint. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, Flash memory, data memory, I/O ports, and embedded peripherals on one device. The STM8S105 access line belongs to the STM8 family of 8-bit microcontrollers and is positioned between the simpler STM8S105x4 devices with 16 KB of Flash and the STM8S105x6 devices with 32 KB of Flash. This hierarchy provides more application memory without moving to a larger 32-bit MCU architecture. The STM8S105K6T6C combines a 16 MHz maximum clock with 32 KB of Flash program memory in 32 KB × 8 organization. Its integrated true data EEPROM supports nonvolatile data retention directly on the MCU, which is useful for calibration values, configuration records, counters, and serialized product data. The 3.3 V and 5 V operating range also supports both legacy 5 V systems and modern 3.3 V peripherals when the board-level limits are respected. The STM8S105K6 architecture is based on the ST7 core described for the STM8S family and uses an 8-bit CISC instruction set. Compared with a small resource-constrained MCU, the 32 KB Flash option provides more room for application code, drivers, protocol handlers, and field-upgrade logic. Compared with a 32-bit MCU, it remains focused on lower-cost control tasks where an 8-bit CPU and simple embedded toolchain are sufficient. Typical uses include appliance controllers, small sensor-hub nodes, keypad interfaces, LED-control boards, compact motor-control peripherals, and industrial automation modules. The 32-pin LQFP package exposes more I/O than smaller leadless packages and remains practical for prototype boards, automated assembly, and repair workflows where a leaded package improves visual inspection. Designers should preserve the MCU power and decoupling layout shown in the manufacturer datasheet, verify the selected oscillator and reset implementation, and confirm every peripheral pin against the exact package drawing. Use the USB-to-UART programming interface and firmware configuration appropriate to the selected ST8 development toolchain, and allow for the operating-temperature grade denoted by the final order code. This product page organizes the core device identity, verified specifications, sourcing information, engineering guidance, and same-family references in one place. It also highlights the practical differences among temperature-grade and Flash-density order codes so engineers can make a replacement decision without assuming that every STM8S105 variant is electrically interchangeable.

RFQ צור קשר
STM8S105K6U6 - 16MHz 8-Bit MCU | STMicroelectronics
STM8S105K6U6

STM8S105K6U6 - 16MHz 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S105K6U6 is an access-line 8-bit STM8 microcontroller with a 16 MHz clock, 32 KB of Flash program memory, integrated true data EEPROM, and a 32-pin VFQFPN package measuring 5 x 5 mm. It operates from 2.95 V to 5.5 V, providing a single device for both 3.3 V and 5 V systems. The MCU also provides a 10-bit ADC, 38 I/O ports, UART, SPI, and I2C interfaces. An 8-bit microcontroller is a compact embedded-processing component that combines a CPU core, program memory, data memory, and peripherals on one integrated circuit. The STM8S105K4/6 access-line family belongs to the STM8S microcontroller portfolio and provides up to 32 Kbytes of Flash memory together with true data EEPROM. This combination supports small control systems that require flexible firmware updates, analog measurement, and serial communications without a separate external memory device. The STM8S105K6U6's principal advantages include a 16 MHz operating clock, 32 KB of Flash program memory, 38 I/O ports, and operation across a 2.95 V to 5.5 V supply range. Its integrated 10-bit ADC enables analog sensor inputs to be processed directly, while UART, SPI, and I2C interfaces allow connection to displays, sensors, memory devices, and other embedded controllers. The 5 x 5 mm VFQFPN format supports compact PCB layouts where board area is constrained. As an STM8S-family access-line device, the MCU combines an 8-bit CISC architecture with integrated serial and analog peripherals. The 32 KB Flash region provides room for application firmware and boot or configuration routines, while integrated true data EEPROM supports parameter storage and calibration data retention. Its 38 I/O ports give designers a substantial pin count for digital control, although the exact available functions depend on the device pin configuration and operating modes. Typical uses include compact industrial controllers, temperature and environmental monitoring equipment, appliance control panels, digital sensor interfaces, communication modules, and compact embedded instruments. The combination of UART, SPI, and I2C makes it suitable for systems that must connect several peripheral classes while retaining a small package and a straightforward 8-bit programming model. PCB design should preserve the exposed-pad thermal and electrical requirements of the VFQFPN package. Place input, output, and decoupling capacitors close to their associated pins, route sensitive analog inputs away from fast-switching nodes, and follow the manufacturer pin-definition and land-pattern guidance during layout. Confirm peripheral availability, alternate-function mappings, clock requirements, and reset behavior against the manufacturer datasheet before finalizing the design. This product page combines the STM8S105K6U6 technical characteristics, package information, practical design guidance, and like-for-like alternatives. It helps engineers compare memory, voltage, interface, and package constraints while preserving the original 32-pin 5 x 5 mm footprint when evaluating a replacement.

RFQ צור קשר
STM8S105K6U6A - 16MHz 32KB 8-Bit MCU | STMicroelectronics
STM8S105K6U6A

STM8S105K6U6A - 16MHz 32KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S105K6U6A is an 8-bit STM8S access-line microcontroller with a 16 MHz maximum clock, 32 KB of Flash program memory, 2 KB of RAM, and 25 I/O ports in a 32-pin UFQFPN package measuring 5 mm by 5 mm. The device also includes integrated true data EEPROM, a 10-bit ADC, timers, UART, SPI, and I2C interfaces. An 8-bit microcontroller is a compact embedded computing device that executes firmware from nonvolatile program memory and controls peripherals through configurable input/output pins. In the product hierarchy, the STM8S105K6U6A is an STM8-family microcontroller within STMicroelectronics' broader STM8 access line. This category is suited to cost-sensitive embedded products that need moderate processing performance, serial communication, analog measurement, and deterministic peripheral control without a higher-complexity processor. The principal features of this part include a 16 MHz clock, 32 KB of Flash memory, 2 KB of RAM, 25 available I/O lines, and a 10-bit ADC. Communications and timing resources include UART, SPI, and I2C interfaces, while integrated timers support periodic events, timing functions, and motor or signal-control applications. Its 32-pin UFQFPN package provides a compact surface-mount footprint while exposing a broad collection of digital and analog functions. The STM8S105 architecture provides an economical balance between processing capability and embedded I/O. Flash memory supports firmware storage, RAM supports working data, and integrated EEPROM can retain configuration or calibration information without external memory. The combination of 16 MHz operation, dedicated serial peripherals, and a 10-bit ADC allows one controller to supervise sensors, communicate with external logic, and coordinate timing-sensitive outputs. Typical applications include compact industrial controllers, building and access-control modules, appliance control boards, sensor interfaces, compact motor controllers, and low-cost communication equipment. The UART, SPI, and I2C peripherals allow the MCU to connect to sensors, displays, transceivers, memories, and other digital components while the ADC supports analog inputs within appropriate operating limits. PCB design should preserve the manufacturer's recommended decoupling, exposed-pad, clock, and analog-input layout practices. The exposed pad beneath the UFQFPN package requires an appropriate land pattern and thermal-via arrangement, while power and signal paths should be routed to minimize noise coupling into ADC measurements. This product page combines manufacturer and distributor specifications with focused engineering guidance covering interface selection, PCB implementation, and drop-in replacement constraints. It also distinguishes a true same-footprint replacement from nearby devices that differ in package or memory configuration, helping engineers evaluate redesign risk before committing a component to a new board revision.

RFQ צור קשר
STM8S105S6T3C - 16MHz 32KB 8-Bit MCU | STMicroelectronics
STM8S105S6T3C

STM8S105S6T3C - 16MHz 32KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S105S6T3C is an 8-bit STM8S access-line microcontroller with a 16 MHz clock, 32 KB of Flash program memory, integrated EEPROM, and a 10-bit ADC, housed in a 44-LQFP 10 mm × 10 mm package. The device operates from 2.95 V to 5.5 V, provides 38 I/O ports, and is specified across a -40 °C to +125 °C temperature range. A microcontroller is a programmable control component that integrates a CPU core, nonvolatile program memory, data memory, peripherals, and I/O into one semiconductor package. The STM8S105 belongs to the STM8 medium-density access-line family. Within the STM8 hierarchy, it provides a compact, low-power platform for embedded control while retaining familiar serial interfaces, timers, analog conversion, and watchdog functions. Key features include 16 MHz maximum clock operation, 32 KB of Flash memory, true integrated EEPROM, and a 10-bit analog-to-digital converter. The peripheral set includes TIM1 advanced-control and general-purpose timers, TIM2, TIM3, and TIM4, SPI, I2C, UART, window watchdog, independent watchdog, and the ADC. These resources support compact consumer controllers, industrial controls, sensor nodes, and embedded motor or actuator interfaces without requiring a larger microcontroller. The STM8S105S6T3C combines an 8-bit architecture with 38 I/O ports in the 44-LQFP package. Its 16 MHz operating rate supports time-sensitive control loops, serial communication, and periodic sensor acquisition. The integrated EEPROM provides a distinct area for parameter retention, while Flash stores firmware. For designs requiring analog measurement, the 10-bit ADC converts sensor signals without requiring a separate external converter. Typical uses include temperature controllers, small motor-control boards, communication modules, appliance interfaces, LED-control systems, and compact industrial control products. The STM8S105S6T3C is especially appropriate where a modest processing load, multiple serial peripherals, and a wide operating-temperature range are more important than a high-performance 32-bit CPU or a large memory footprint. PCB design should follow the manufacturer's pin-definition and recommended decoupling guidance. Place the supply bypass capacitors close to their power and ground pins, reserve a stable clock source, and route sensitive analog inputs away from high-current switching nodes. Confirm the exact package dimensions, exposed pad treatment, and pin assignments against the manufacturer datasheet before releasing artwork. This page combines device specifications, interface coverage, replacement guidance, and application-focused design considerations. It also distinguishes genuine package-compatible STM8S105 order-code options from unrelated MCUs, helping engineers narrow a replacement without confusing similar memory sizes with true drop-in compatibility.

RFQ צור קשר
STM8S105S6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics
STM8S105S6T6

STM8S105S6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics

The STM8S105S6T6 is an 8-bit microcontroller from STMicroelectronics' STM8S access line, featuring a high-performance STM8 core running at up to 16 MHz. It integrates 32 Kbytes of Flash program memory, 2 Kbytes of RAM, and true data EEPROM, making it suitable for a wide range of embedded control applications. The device operates from a 3.3V or 5V supply and is available in a 44-pin LQFP package. An 8-bit microcontroller is a single-chip computer with an 8-bit data bus, designed for cost-sensitive control applications. It typically integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals such as timers, UART, SPI, and ADC on a single die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers lower cost, lower power consumption, and simpler development, making it ideal for applications like home appliances, industrial control, and consumer electronics. Key features of the STM8S105S6T6 include a 10-bit ADC with up to 10 channels, multiple 16-bit timers, a UART, SPI, and I2C interfaces, and an integrated EEPROM for data storage. The STM8 core is CISC-based with a pipeline architecture, achieving 16 MIPS at 16 MHz. The device supports a wide operating voltage range of 2.95V to 5.5V, ensuring compatibility with both 3.3V and 5V systems. The STM8S105S6T6 is part of the STM8S105xx medium-density family, which offers from 16 to 32 Kbytes of Flash. It is pin-compatible with other STM8S105 devices, allowing easy migration between memory sizes. The integrated EEPROM eliminates the need for external EEPROM chips, reducing BOM cost and board space. The device also features robust ESD protection and a wide operating temperature range of -40°C to +85°C. Typical applications include home appliances (washing machines, air conditioners), industrial control (motor control, sensors), and consumer electronics (remote controls, power tools). The rich peripheral set and low cost make it a popular choice for high-volume applications. The 44-pin LQFP package provides a good balance between I/O count and board space. When designing with this MCU, ensure proper decoupling of the power supply with 100nF and 10uF capacitors close to the VDD pins. The STM8S105S6T6 supports in-circuit programming and debugging via SWIM, simplifying firmware development. For low-power applications, use the HALT and WAIT modes to reduce current consumption.

RFQ צור קשר
STM8S207C6T3 - 24MHz 32KB 8-Bit MCU | STMicroelectronics
STM8S207C6T3

STM8S207C6T3 - 24MHz 32KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207C6T3 is a 24 MHz, 8-bit STM8S performance-line microcontroller with 32 KB of Flash program memory, integrated EEPROM, and a 48-LQFP package. The device includes a 10-bit ADC, timers, two UARTs, SPI, I²C, and CAN interfaces, providing a compact embedded-control platform for industrial, consumer, communications, and automotive-adjacent equipment. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, and peripherals onto one package. The STM8S207 belongs to the STM8S family and the broader hierarchy of microcontroller → embedded processor → semiconductor. Its performance-line positioning combines a 24 MHz clock with multiple serial interfaces, making it useful where moderate control processing and system connectivity matter more than the processing power of a 32-bit Cortex-M device. Key features include 32 KB of Flash memory, an integrated 10-bit analog-to-digital converter, two UARTs, SPI, I²C, and CAN connectivity, plus 38 I/O ports according to the retrieved product data. The 3 V to 5.5 V supply range supports conventional embedded equipment, while the 48-pin LQFP package exposes enough interface pins for external memories, sensors, actuators, and communications transceivers. The STM8S207C6T3 belongs to STMicroelectronics' STM8S20xxx performance line, whose devices span program-memory configurations from 32 KB to 128 KB. This particular ordering code provides the 32 KB configuration and 24 MHz maximum operating frequency. Its combination of EEPROM and Flash supports firmware storage and nonvolatile parameter retention without requiring an external memory component in designs that remain within the available memory budget. Typical applications include industrial sensor nodes, CAN-connected equipment, motor and relay controllers, building-control interfaces, compact communication modules, and low-cost embedded control panels. The CAN interface is especially useful in systems that need deterministic network participation, while SPI and I²C allow the controller to connect sensors and external transceivers. The two UARTs also support legacy serial peripherals, diagnostics ports, or service interfaces. Designers should verify the exact pin assignment, alternate-function mapping, clock configuration, and peripheral electrical limits in the manufacturer datasheet before layout release. The LQFP package also requires attention to thermal dissipation when the device operates continuously at 24 MHz or drives I/O loads at the maximum specified levels. Because public snippets do not provide a complete verified pin list, no unverified pin assignments are asserted here. This page consolidates verified distributor and manufacturer information, practical integration guidance, package-specific comparisons, and honest drop-in alternative constraints. It distinguishes confirmed values from missing details and avoids presenting generic cross-reference results as guaranteed replacements.

RFQ צור קשר
STM8S207C8T3 - 24MHz 8-Bit MCU with 64KB Flash | ST
STM8S207C8T3

STM8S207C8T3 - 24MHz 8-Bit MCU with 64KB Flash | ST

The STMicroelectronics STM8S207C8T3 is an 8-bit STM8 performance-line microcontroller with a 24 MHz clock, 64 KB of Flash program memory, and a 48-LQFP 7 x 7 mm package. The supplied distributor data identifies an 8-bit architecture and confirms 64 KB Flash; Mouser additionally lists 4 KB RAM. Designed as a compact embedded-control MCU, it combines mixed-signal measurement, communications, timing, and general-purpose I/O capabilities for cost-sensitive industrial and consumer equipment. An STM8S microcontroller belongs to the 8-bit MCU hierarchy: microprocessor core, embedded controller, and programmable digital control component. Unlike a discrete logic controller, an MCU integrates firmware memory, data memory, peripherals, and I/O in one package. This integration lets a design acquire sensor inputs, execute control logic, drive outputs, and exchange data with other assemblies without requiring several separate logic devices. Confirmed features include 24 MHz operation, 64 KB Flash, 4 KB RAM, 38 I/O ports, and a 3 V to 5.5 V supply range. The STM8S207 family description also identifies a 10-bit ADC, timers, two UARTs, SPI, I2C, and CAN. These interfaces support analog measurement, actuator control, serial peripherals, industrial networking, and service communications. The exact pin assignments and complete electrical limits require confirmation against the manufacturer documentation. At a maximum 24 MHz clock, the 8-bit MCU provides useful processing throughput without an external memory interface. Its 64 KB Flash supports embedded application code, while 4 KB RAM handles working data and stack operations. The 48-LQFP package exposes substantially more I/O than smaller packages, making the device suitable for connectorized control boards that need numerous digital, analog, and communications signals. Typical uses include industrial control modules, motor and relay-control boards, sensor acquisition units, CAN-connected equipment, communication bridges, and compact consumer appliances. A design can place the MCU beside sensors and power stages, then use its ADC and serial interfaces to acquire measurements while timers and GPIO control the system. Firmware and external circuitry still require validation for timing, analog accuracy, and EMC requirements. The principal layout consideration is careful decoupling and signal grouping around the 48-LQFP device. Keep the MCU supply path compact, place stable bypass capacitance at its supply pins, reserve adjacent routing for sensitive analog inputs, and separate high-current switching returns. Before layout approval, verify every ball-and-pad-style LQFP pin assignment against the official pinout and confirm oscillator, debug, reset, and communications routing requirements. This page consolidates verified distributor specifications, sourcing information, family capabilities, and practical selection considerations. It distinguishes confirmed STM8S207C8T3 values from unavailable details rather than estimating electrical limits, package pricing tiers, pin functions, or lifecycle compliance claims.

RFQ צור קשר
STM8S207C8T6 - 24MHz 8-bit MCU, 64KB Flash | STMicroelectronics
STM8S207C8T6

STM8S207C8T6 - 24MHz 8-bit MCU, 64KB Flash | STMicroelectronics

The STM8S207C8T6 is a performance-line 8-bit microcontroller from STMicroelectronics, built around a high-performance STM8 core running at up to 24 MHz. It integrates 64 KB of Flash program memory, 4 KB of RAM, and 2 KB of EEPROM, along with a rich peripheral set including a 10-bit ADC, multiple timers, two UARTs, SPI, I2C, and CAN. Housed in a 48-pin LQFP package, this MCU is designed for cost-sensitive industrial and consumer applications requiring robust performance and a wide operating voltage range of 2.95V to 5.5V. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus that integrates a processor core, memory (Flash, RAM, EEPROM), and programmable peripherals (timers, ADC, communication interfaces) on one die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers lower cost, simpler architecture, and lower power consumption, making it ideal for control-oriented tasks. The STM8S207C8T6 belongs to the STM8 family from STMicroelectronics, positioned between the low-cost STM8S value line and the 32-bit ARM-based STM32 MCUs. Key features include a 24 MHz CPU clock (20 MIPS), 64 KB Flash with read-while-write capability, 2 KB of true EEPROM rated for up to 300k write/erase cycles, and a 10-bit ADC with up to 10 multiplexed channels. Communication interfaces cover two UARTs, one SPI, one I2C, and a CAN 2.0B controller. Operation from 2.95V to 5.5V supports both 3.3V and 5V systems, with low-power modes reducing consumption below the 5.4 mA typical running current at 24 MHz. Technically, the STM8 core is a CISC architecture with a 3-stage pipeline and a single-wire debug interface (SWIM) supporting ICP and IAP programming. The LQFP-48 package provides 38 I/O pins, most with multiple alternate functions for flexible board design. Typical applications include industrial control systems, home appliances, motor control, sensor interfaces, and CAN-networked nodes in automotive and industrial systems, where the rich timer set supports PWM generation. Design tip: decouple VDD/VDDA with 100nF capacitors placed close to the device, add a pull-up on SWIM, and use an external transceiver (e.g., TJA1050) with 120-ohm bus termination for CAN.

RFQ צור קשר
STM8S207C8T6TR - 24MHz 8-bit MCU, 64KB Flash | STMicroelectronics (Tape & Reel)
STM8S207C8T6TR

STM8S207C8T6TR - 24MHz 8-bit MCU, 64KB Flash | STMicroelectronics (Tape & Reel)

The STM8S207C8T6TR is a performance-line 8-bit microcontroller from STMicroelectronics, built around a high-performance STM8 core running at up to 24 MHz. It integrates 64 KB of Flash program memory, 4 KB of RAM, and 2 KB of EEPROM, along with a rich peripheral set including a 10-bit ADC, multiple timers, two UARTs, SPI, I2C, and CAN. Housed in a 48-pin LQFP package, this MCU is designed for cost-sensitive industrial and consumer applications requiring robust performance and a wide operating voltage range of 2.95V to 5.5V. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus that integrates a processor core, memory (Flash, RAM, EEPROM), and programmable peripherals (timers, ADC, communication interfaces) on one die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers lower cost, simpler architecture, and lower power consumption, making it ideal for control-oriented tasks. The STM8S207C8T6TR belongs to the STM8 family from STMicroelectronics, positioned between the low-cost STM8S value line and the 32-bit ARM-based STM32 MCUs. Key features include a 24 MHz CPU clock (20 MIPS), 64 KB Flash with read-while-write capability, 2 KB of true EEPROM rated for up to 300k write/erase cycles, and a 10-bit ADC with up to 10 multiplexed channels. Communication interfaces cover two UARTs, one SPI, one I2C, and a CAN 2.0B controller. Operation from 2.95V to 5.5V supports both 3.3V and 5V systems, with low-power modes reducing consumption below the 5.4 mA typical running current at 24 MHz. Technically, the STM8 core is a CISC architecture with a 3-stage pipeline and a single-wire debug interface (SWIM) supporting ICP and IAP programming. The LQFP-48 package provides 38 I/O pins, most with multiple alternate functions for flexible board design. Typical applications include industrial control systems, home appliances, motor control, sensor interfaces, and CAN-networked nodes in automotive and industrial systems, where the rich timer set supports PWM generation. Design tip: decouple VDD/VDDA with 100nF capacitors placed close to the device, add a pull-up on SWIM, and use an external transceiver (e.g., TJA1050) with 120-ohm bus termination for CAN.

RFQ צור קשר
STM8S207CBT3 - 24MHz 8-Bit MCU, 128KB Flash | STMicroelectronics
STM8S207CBT3

STM8S207CBT3 - 24MHz 8-Bit MCU, 128KB Flash | STMicroelectronics

STMicroelectronics STM8S207CBT3 is a 24 MHz, 8-bit performance-line STM8S microcontroller with 128 KB of Flash program memory, 38 I/O ports, a 3 V to 5.5 V supply range, and a 48-pin LQFP package. It combines an 8-bit CPU, embedded Flash memory, general-purpose I/O, and integrated peripherals in one surface-mount device for compact embedded-control systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O, and peripherals into a single component. Within the electronics hierarchy, the STM8S207CBT3 belongs to the STM8S family of 8-bit microcontrollers and sits below general-purpose MCU, embedded processor, and semiconductor categories. Its internal Flash memory allows firmware, configuration data, and application constants to be stored directly on the chip, reducing the component count of a standalone controller board. The manufacturer identifies this device as a performance-line member operating at 24 MHz with 128 KB of Flash. The 128 KB total is organized as 128K x 8, according to the distributor listing. Its stated 3 V to 5.5 V supply range supports conventional embedded systems, while 38 I/O ports provide connections for digital control signals, switches, indicators, and peripheral interfaces. The STM8S20xxx family is intended for applications requiring more performance and memory than smaller STM8 devices. That positioning makes the STM8S207CBT3 useful in industrial controllers, compact automation equipment, sensor nodes, motor-control systems, and consumer products. Its 48-LQFP package exposes a comparatively generous pin count while remaining compatible with standard surface-mount assembly and inspection processes. Typical design choices include using the 3.3 V or 5 V rail within the stated 3 V to 5.5 V range, programming the internal Flash through the manufacturer-supported development interface, and assigning I/O according to the pin-description table in the datasheet. Designers should preserve the device-specific pin multiplexing, oscillator, reset, and debug connections when laying out a new PCB. For new designs, confirm the complete electrical limits, peripheral configuration, startup behavior, and package drawing in the manufacturer datasheet before committing the footprint. The 48-LQFP land pattern should be checked against the official mechanical drawing, and unused I/O pins should be treated according to the device guidance rather than assigned automatically. This product page organizes the verified identity, core specifications, sourcing paths, same-package alternatives, and design considerations for STM8S207CBT3. It also identifies where additional engineering data must be consulted, helping engineers move from general MCU selection to a verified schematic and layout review.

RFQ צור קשר
STM8S207CBT6 - 24MHz 128KB Flash 8-Bit MCU | STMicroelectronics
STM8S207CBT6

STM8S207CBT6 - 24MHz 128KB Flash 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207CBT6 is a 24 MHz, 8-bit STM8S performance-line microcontroller with 128 KB of embedded Flash program memory in an LQFP-48 package. The device is designed for industrial control, communications equipment, data acquisition, and embedded control systems that need more memory and peripheral integration than entry-level 8-bit microcontrollers. An 8-bit microcontroller is a compact computing platform that integrates a CPU core, program Flash, data RAM, I/O ports, timers, communication interfaces, and reset and clock circuitry on one package. Within the product hierarchy, the STM8S207CBT6 belongs to the STM8S high-density performance line, combining an 8-bit architecture with a 24 MHz clock and extended peripheral resources for control-oriented embedded products. Key features include 24 MHz maximum CPU frequency, 128 KB of Flash memory organized as 128 K x 8, a multi-pin LQFP package, and the STM8S peripheral set. According to the manufacturer STM8S20xxx datasheet, the family covers devices with 32 KB to 128 KB of Flash and is intended for applications requiring a balance of processing speed, memory, and low-cost integration. The STM8S207CBT6 is ordered in the temperature range indicated by the T6 suffix and ships in a tape-and-reel format for automated assembly. The STM8S architecture supports embedded control workloads such as keypad and display management, industrial communication, sensor acquisition, and supervisory control. Its 24 MHz performance provides additional timing headroom for interrupt-driven control loops, while 128 KB of Flash allows larger application code, lookup tables, and protocol stacks than smaller STM8 devices. Designers should still verify peripheral availability, pin multiplexing, clock limits, and electrical limits against the device-specific sections of the STM8S20xxx datasheet. Because the STM8S207CBT6 uses the STM8S peripheral architecture, existing STM8 code, driver structures, and tool-chain workflows can be reused. STMicroelectronics tools such as ST-LINK, STM8CubeProgrammer, and STM8CubeMX support the programming and configuration workflow. Confirm the exact debugger, bootloader, and application-note requirements for the deployed firmware before layout sign-off. When planning the PCB, reserve the LQFP-48 footprint with the manufacturer-recommended pad dimensions and land pattern, connect all supply pins, and place decoupling capacitors close to each supply pin. This page consolidates verified part identity, memory and speed data, same-family alternatives, and practical design guidance for engineers evaluating a second source or redesign around the STM8S207CBT6.

RFQ צור קשר
STM8S207K6T3C - 24MHz 8-Bit MCU | STMicroelectronics
STM8S207K6T3C

STM8S207K6T3C - 24MHz 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207K6T3C is a 24 MHz, 8-bit STM8S performance-line microcontroller with 32 KB of Flash memory, integrated EEPROM, and communication peripherals including two UARTs, SPI, I²C, and CAN. It operates from 3 V to 5.5 V and is packaged in a 48-pin LQFP (LFQP) surface-mount package. An STM8 microcontroller is an 8-bit embedded controller in the semiconductor and microcontroller hierarchy. The STM8S207K6T3C combines an advanced STM8 Harvard-architecture core with integrated analog and communications functions, allowing a compact control design to avoid adding separate interface ICs. Its 24 MHz operating frequency and zero-wait-state operation at 16 MHz support responsive control tasks, while the Harvard architecture separates program and data access paths. The device combines a 10-bit ADC with timers, two UARTs, SPI, I²C, and CAN connectivity. A 3 V to 5.5 V supply range allows use in industrial, consumer, instrumentation, communications, and embedded-control equipment. Its 38 I/O ports provide external connections for sensors, actuators, human-interface devices, status indicators, and bus nodes. The integrated EEPROM supports nonvolatile parameter storage without requiring an external memory component. The K6 configuration provides 32 KB of Flash program memory, distinguishing it from higher-density members of the STM8S207 family. The manufacturer identifies the STM8S20x family as a performance line spanning 32 KB to 128 KB of Flash memory. This balance of memory, connectivity, and processing speed makes the part appropriate for compact products that need multiple serial interfaces without the footprint and cost of a larger general-purpose MCU. Typical uses include CAN-connected industrial controllers, motor and actuator control systems, instrumentation, communication equipment, and compact embedded platforms. Two UARTs can support diagnostic or configuration links, SPI can accommodate faster peripherals or memory, and I²C supports sensors and configuration devices. CAN is useful when the controller must participate in a multidrop industrial network or communicate with another embedded subsystem. When laying out the board, follow the manufacturer’s pin-description table and package drawing when assigning the 38 I/O ports and power pins. Keep decoupling capacitors close to the supply pins, route high-current returns directly to the ground plane, and confirm clock, reset, programming, and communication signal routing against the device documentation. Adequate exposed-board area around the LQFP package improves heat transfer. This product page combines the manufacturer’s family information with practical interface-selection guidance, verified lifecycle information, same-package replacement analysis, and engineering guidance for evaluating the STM8S207K6T3C in embedded-control systems.

RFQ צור קשר
STM8S207K6T6 - 24MHz 8-bit MCU, 32KB Flash | STMicroelectronics
STM8S207K6T6

STM8S207K6T6 - 24MHz 8-bit MCU, 32KB Flash | STMicroelectronics

The STM8S207K6T6 is a performance-line 8-bit microcontroller from STMicroelectronics, featuring a 24 MHz STM8 core with up to 32 Kbytes of Flash program memory. It integrates 2 Kbytes of data EEPROM, a 10-bit ADC, multiple timers, two UARTs, SPI, I²C, and CAN interfaces, all in a 32-pin LQFP package. This MCU is designed for cost-sensitive industrial and consumer applications requiring robust communication and control capabilities. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, executing instructions on 8-bit words. It integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals (timers, ADC, communication interfaces) on one die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers lower cost, simpler architecture, and lower power consumption, making it ideal for control-oriented tasks like motor control, sensor interfacing, and human-machine interfaces. The STM8S207K6T6 belongs to the STM8S20xxx performance line, which balances performance and peripheral richness for mid-range embedded applications. Key features include a 24 MHz CPU clock, 32 Kbytes of Flash, 2 Kbytes of RAM, 2 Kbytes of EEPROM, a 10-bit ADC with up to 10 channels, two 16-bit timers, one 8-bit timer, two UARTs, SPI, I²C, and a CAN 2.0B controller. The device operates from 2.95V to 5.5V, making it suitable for 3.3V and 5V systems. It also features a low-power mode with typical current consumption of 5.4 mA at 24 MHz, and a halt mode with 1.5 µA typical current. The STM8S207K6T6 uses a Harvard architecture with a 3-stage pipeline, achieving up to 20 MIPS at 24 MHz. It includes an embedded debug module (SWIM) for in-circuit debugging and programming, and a single-wire interface for firmware updates. The CAN controller supports CAN 2.0B active mode, enabling robust industrial networking. The device is manufactured using ST's proprietary 130nm process, balancing performance and power efficiency. Typical applications include industrial control systems, home appliances, automotive body electronics (non-safety), sensor nodes, and communication gateways. The CAN interface makes it particularly suitable for automotive and industrial CAN bus networks, while the multiple UARTs and SPI/I²C support diverse peripheral connectivity. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100nF capacitors placed close to the pins. The SWIM pin should be pulled up with a 10kΩ resistor for reliable programming. For CAN applications, an external CAN transceiver (e.g., TJA1050) is required, and the bus termination resistor should be 120Ω at each end of the CAN bus.

RFQ צור קשר
STM8S207K6T6C - 24MHz 32KB 8-Bit MCU | STMicroelectronics
STM8S207K6T6C

STM8S207K6T6C - 24MHz 32KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S207K6T6C is an 8-bit STM8S performance-line microcontroller with a 24 MHz maximum CPU frequency, 32 KB of Flash program memory, and a 32-pin LQFP package. It combines an advanced STM8 CISC core with integrated EEPROM, a 10-bit ADC, timers, two UARTs, SPI, I²C, and CAN interfaces. The device operates from a 3.3 V or 5 V supply, making it suitable for embedded control, communications, sensing, and industrial automation systems. An 8-bit microcontroller is a compact programmable controller that integrates a CPU, memory, and peripheral interfaces into one semiconductor package. The STM8S207 belongs to the STM8 performance line, a branch of the STM8 8-bit MCU family within the broader embedded-controller and semiconductor hierarchy. Its Harvard-style memory organization separates program execution from data access, supporting efficient control-loop operation while allowing firmware and working data to use separate memory spaces. The STM8S207K6T6C reaches 24 MHz with zero wait states at 16 MHz, according to the manufacturer documentation. Its 32 KB Flash capacity provides room for application firmware, while integrated EEPROM supports nonvolatile parameter storage. The 10-bit ADC permits analog measurements, and the two UARTs, SPI, I²C, and CAN interfaces support multiple communication topologies without requiring entirely separate serial controller ICs. A broad timer complement is useful for periodic tasks, motor timing, input capture, and pulse-width-related control. The advanced STM8 core uses a Harvard architecture and a three-stage pipeline, balancing predictable interrupt-driven behavior with modest instruction-level parallelism. This architecture is particularly effective in real-time embedded designs where deterministic peripheral servicing is more valuable than maximum software throughput. On-chip communications and analog conversion also reduce board complexity and help preserve package space in compact controllers. Typical uses include industrial sensor nodes, CAN-connected equipment, motor-control peripherals, keypad interfaces, building-control modules, and compact communication bridges. The CAN and RS-485-oriented UART resources are useful for industrial networking, while SPI and I²C suit sensors, displays, memory devices, and board-level expansion. The 32-pin LQFP is easy to assemble and inspect during prototype rework. PCB design should preserve clean decoupling around VDDA and VSSA, route high-current and communication interfaces away from sensitive analog inputs, and provide test access to reset and programming signals. Confirm the exact clock, reset, and peripheral-pin assignments in the manufacturer pin-description table before final routing because firmware configuration determines which functions can be assigned to a given pad. This product page consolidates the core device characteristics, same-family replacement options, interface-level application guidance, and practical PCB considerations. It supports faster component selection by organizing clock, memory, analog, communications, package, and substitution information in one engineering-oriented reference.

RFQ צור קשר
STM8S207K8T6C - 24MHz 64KB 8-Bit MCU | STMicroelectronics
STM8S207K8T6C

STM8S207K8T6C - 24MHz 64KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207K8T6C is a 24 MHz 8-bit STM8S performance-line microcontroller with 64 KB of Flash program memory in a 32-pin LQFP package. The device combines an integrated EEPROM, a 10-bit ADC, two UART interfaces, SPI, I2C, CAN, and timer resources for compact embedded control designs. An STM8S performance-line microcontroller belongs to the 8-bit MCU hierarchy and provides economical control for industrial equipment, communications modules, motor-control subsystems, and consumer products. Unlike application-specific controllers, the STM8S207K8T6C integrates programmable digital interfaces and analog conversion in one device, allowing a compact design to handle sensing, communications, timing, and actuator control without requiring a separate host processor. The 24 MHz clock supports faster instruction execution than many entry-level 8-bit MCUs, while the 64 KB Flash configuration provides room for a larger application program than the smallest STM8 devices. Integrated EEPROM supports nonvolatile parameter storage, and the 10-bit ADC enables direct analog measurement. Two UARTs, SPI, I2C, and CAN provide options for sensor access, external peripherals, data logging, and network-connected equipment. The STM8S207K8T6C belongs to the STM8S20xxx performance line, which supports devices from 32 to 128 KB of Flash. Its 32-pin LQFP package exposes the MCU's GPIO, communication, timer, debug, reset, clock, and power functions on a conventional leaded surface-mount footprint. This package is easier to inspect and solder than very fine-pitch packages, making it suitable for prototypes, serviceable equipment, and moderate-production assemblies. Typical applications include industrial sensor controllers, CAN-connected equipment, UART-based data concentrators, SPI peripheral controllers, motor and valve-control modules, and compact consumer appliances. The combination of CAN and multiple serial interfaces is especially useful when a board must monitor sensors while communicating with a higher-level controller or service network. PCB design should preserve clean supply decoupling near the power pins, route sensitive analog and clock signals away from high-current switching nodes, and follow the manufacturer datasheet for alternate-function assignment and unused-pin treatment. Firmware replacement must also account for the exact Flash density, bootloader assumptions, peripheral configuration, and pin multiplexing of the selected device. This product page consolidates the key MCU capabilities, verified source links, comparison parameters, application guidance, and design considerations needed to plan an STM8S207K8T6C-based board efficiently.

RFQ צור קשר
STM8S207MBT6B - 24MHz 128KB 8-Bit MCU | STMicroelectronics
STM8S207MBT6B

STM8S207MBT6B - 24MHz 128KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207MBT6B is a 24 MHz performance-line 8-bit STM8 microcontroller with 128 KB of Flash program memory, integrated EEPROM, a 10-bit ADC, communication peripherals, and an 80-pin LQFP package measuring 14 x 14 mm. It is designed for embedded control systems requiring broad connectivity, moderate processing performance, and ample program storage. An 8-bit microcontroller is a compact semiconductor containing a processor core, program memory, data memory, peripherals, and clock circuitry on one integrated circuit. The STM8S207MBT6B belongs to the STM8S performance line, where the STM8S family serves as the product family, the 8-bit MCU is the product type, and the microcontroller is the broader category within the semiconductor hierarchy. Its architecture is suitable for industrial controls, embedded equipment, communications equipment, and compact automation systems. The device operates at up to 24 MHz and provides 128 KB of Flash memory. Integrated resources include EEPROM, a 10-bit analog-to-digital converter, timers, two UART interfaces, SPI, I²C, and CAN. These interfaces allow the MCU to connect sensors, actuator drivers, transceivers, displays, and industrial communication networks while retaining a relatively small 80-pin LQFP footprint. The STM8S performance line combines an 8-bit CISC-oriented embedded architecture with performance reaching 20 MIPS at 24 MHz according to the manufacturer product listing. Integrated EEPROM supports nonvolatile parameter and calibration storage, while the 10-bit ADC supports analog measurement. The two UARTs provide asynchronous serial connectivity, and SPI and I²C support peripheral expansion and sensor integration; CAN makes the device especially relevant to industrial and embedded networking designs. Typical applications include industrial control panels, motor and actuator control systems, CAN-connected equipment, data acquisition modules, communication controllers, instrumentation, and compact consumer or industrial controllers. Its 128 KB Flash capacity is useful for protocol stacks, control firmware, diagnostics, and field-updatable embedded functions. The 80-pin LQFP also provides more I/O and peripheral options than smaller packages, reducing the need for external interface expanders. PCB design should preserve access to all 80 package pins and follow the manufacturer’s pin, decoupling, clock, and exposed-resource recommendations. Because the exact numbered pin assignment is not reproduced on this page, use the manufacturer datasheet pin-description table when assigning tracks and connectors. Validate the external clock configuration, reset circuit, supply bypassing, and programming interface before releasing the PCB. This page combines the manufacturer’s 24 MHz and 128 KB headline specifications with interface-level application guidance, engineering design notes, and same-family drop-in comparisons. These details help engineers distinguish memory-capacity variants while confirming package, peripheral, and firmware-migration implications before selecting a replacement.

RFQ צור קשר
STM8S207R6T6 - 24MHz 8-Bit MCU 32KB Flash LQFP-64 | STMicroelectronics
STM8S207R6T6

STM8S207R6T6 - 24MHz 8-Bit MCU 32KB Flash LQFP-64 | STMicroelectronics

The STMicroelectronics STM8S207R6T6 is a performance-line 8-bit STM8S microcontroller built around a CISC Harvard architecture core running at 24 MHz (20 MIPS) with 32 KB of on-chip Flash program memory and up to 2 KB of SRAM plus an integrated EEPROM data area. It integrates a 10-bit ADC, two 16-bit timers plus one 8-bit timer, two UARTs, SPI, I2C, and CAN, all in a 64-pin LQFP (T6 suffix) package operating from 2.95 V to 5.5 V. The device is positioned in the STM8S20xxx family which scales from 32 KB to 128 KB Flash and is intended for cost-sensitive motor-control, appliance, and industrial-control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripherals onto one silicon die. The STM8 family uses a CISC 8-bit core with a 16-bit instruction word, giving higher code density than legacy 8051 cores while retaining the predictable interrupt latency and deterministic timing that embedded control designers prefer. The STM8S207 series specifically belongs to the STM8S "performance line," sitting above the access-line STM8S103 and below the value-line STM8S105, and is paired with ST's Cosmic, IAR, and Raisonance toolchains plus the free STVD development environment. Key features of the STM8S207R6T6 include a 20 MIPS peak instruction throughput at 24 MHz, integrated CAN 2.0B interface, a 1 Mbyte linear address space, a single-wire SWIM debug interface, and an embedded bootloader stored in ROM for in-application Flash programming. The device offers 38 GPIOs with 5 V tolerance on most pins and supports up to 16 external interrupts. Watchdog, auto-wakeup, and a 4-level low-power run/wait/slow/halt scheme allow the device to drop quiescent current below 5 uA in Halt with full RAM retention. Architecturally, the STM8S core pairs a 32-bit program address bus with a 24-bit data address bus and supports up to 16 Mbytes of linear addressing for data, while code is read from a separate Flash bus. This Harvard split removes fetch-decode stalls that plague older 8-bit Von Neumann designs and is the reason the family reaches 20 MIPS at 24 MHz without wait states. A 32 KB Flash variant such as the STM8S207R6 sits at the low-memory end of the family, sharing the same peripheral set as the larger 64 KB (R8) and 128 KB (RB) siblings. Typical applications include BLDC/PMSM motor control in appliances, HVAC fan and pump control, smart metering, lighting ballast control, industrial sensor hubs, and CAN-connected remote I/O nodes. The integrated CAN controller, combined with 32 KB Flash, makes the part a good fit for distributed industrial nodes that need deterministic on-chip comms without an external transceiver MCU. When designing with the STM8S207R6T6, pay attention to the 5 V I/O tolerance (most pins are true 5 V tolerant, but a few high-current pins are FT-compat only) and to the SWIM pin shared with NRST; the debug probe needs a tri-state buffer on the SWIM line for in-circuit debugging without disabling reset. The internal 16 MHz HSI RC is accurate to about 1 percent after user trimming, but designs that need CAN bit-time accuracy must select the external HSE crystal option. This page synthesizes distributor pricing, drop-in LQFP-64 alternatives, and practical hardware design notes not found in the manufacturer datasheet alone.

RFQ צור קשר
STM8S207R6T6TR - 24MHz 8-Bit MCU 32KB Flash LQFP-64 | STMicroelectronics (Tape & Reel)
STM8S207R6T6TR

STM8S207R6T6TR - 24MHz 8-Bit MCU 32KB Flash LQFP-64 | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM8S207R6T6TR is a performance-line 8-bit STM8S microcontroller built around a CISC Harvard architecture core running at 24 MHz (20 MIPS) with 32 KB of on-chip Flash program memory and up to 2 KB of SRAM plus an integrated EEPROM data area. It integrates a 10-bit ADC, two 16-bit timers plus one 8-bit timer, two UARTs, SPI, I2C, and CAN, all in a 64-pin LQFP (T6 suffix) package operating from 2.95 V to 5.5 V. The device is positioned in the STM8S20xxx family which scales from 32 KB to 128 KB Flash and is intended for cost-sensitive motor-control, appliance, and industrial-control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripherals onto one silicon die. The STM8 family uses a CISC 8-bit core with a 16-bit instruction word, giving higher code density than legacy 8051 cores while retaining the predictable interrupt latency and deterministic timing that embedded control designers prefer. The STM8S207 series specifically belongs to the STM8S "performance line," sitting above the access-line STM8S103 and below the value-line STM8S105, and is paired with ST's Cosmic, IAR, and Raisonance toolchains plus the free STVD development environment. Key features of the STM8S207R6T6TR include a 20 MIPS peak instruction throughput at 24 MHz, integrated CAN 2.0B interface, a 1 Mbyte linear address space, a single-wire SWIM debug interface, and an embedded bootloader stored in ROM for in-application Flash programming. The device offers 38 GPIOs with 5 V tolerance on most pins and supports up to 16 external interrupts. Watchdog, auto-wakeup, and a 4-level low-power run/wait/slow/halt scheme allow the device to drop quiescent current below 5 uA in Halt with full RAM retention. Architecturally, the STM8S core pairs a 32-bit program address bus with a 24-bit data address bus and supports up to 16 Mbytes of linear addressing for data, while code is read from a separate Flash bus. This Harvard split removes fetch-decode stalls that plague older 8-bit Von Neumann designs and is the reason the family reaches 20 MIPS at 24 MHz without wait states. A 32 KB Flash variant such as the STM8S207R6 sits at the low-memory end of the family, sharing the same peripheral set as the larger 64 KB (R8) and 128 KB (RB) siblings. Typical applications include BLDC/PMSM motor control in appliances, HVAC fan and pump control, smart metering, lighting ballast control, industrial sensor hubs, and CAN-connected remote I/O nodes. The integrated CAN controller, combined with 32 KB Flash, makes the part a good fit for distributed industrial nodes that need deterministic on-chip comms without an external transceiver MCU. When designing with the STM8S207R6T6TR, pay attention to the 5 V I/O tolerance (most pins are true 5 V tolerant, but a few high-current pins are FT-compat only) and to the SWIM pin shared with NRST; the debug probe needs a tri-state buffer on the SWIM line for in-circuit debugging without disabling reset. The internal 16 MHz HSI RC is accurate to about 1 percent after user trimming, but designs that need CAN bit-time accuracy must select the external HSE crystal option. This page synthesizes distributor pricing, drop-in LQFP-64 alternatives, and practical hardware design notes not found in the manufacturer datasheet alone.

RFQ צור קשר
STM8S207R8T3 - 24 MHz 64 KB 8-Bit MCU | STMicroelectronics
STM8S207R8T3

STM8S207R8T3 - 24 MHz 64 KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S207R8T3 is an 8-bit STM8S performance-line microcontroller operating at up to 24 MHz with 64 KB of Flash program memory in a 64-pin LQFP package. It is designed for embedded control applications requiring a compact 8-bit core, integrated communication peripherals, and mixed-signal measurement capability. The device includes a 10-bit ADC, two UART interfaces, SPI, I2C, CAN, and multiple timers according to the STM8S207R8T3 family documentation. An STM8 microcontroller is an 8-bit embedded controller within the broader microcontroller and semiconductor hierarchy. It combines a CPU, program memory, data memory, peripherals, and general-purpose I/O in one integrated circuit. The STM8S207 performance line is aimed at applications that need more connectivity and mixed-signal resources than basic 8-bit controllers, while retaining the simple programming model and peripheral set associated with the STM8 family. The headline operating specifications are a 24 MHz maximum clock speed, 64 KB of Flash memory, and a 64-pin LQFP package. The MCU supports a 3 V to 5.5 V supply range, as identified in the STM8S207R8T3 technical listing, and provides 38 I/O ports in the same listing. Its integrated 10-bit ADC enables analog sensor acquisition, while the CAN, UART, SPI, and I2C interfaces support industrial communication, external peripherals, data logging, and actuator-control systems. The STM8S207R8T3 belongs to the STM8S207 family, whose 64-pin members provide a practical balance of processing speed, memory, connectivity, and package size. The 8-bit architecture is suitable for real-time control tasks that do not require a high-performance 32-bit CPU. Typical embedded applications include motor and relay control, industrial interfaces, instrumentation, environmental monitoring, communication gateways, and compact consumer controllers. Design work should account for the device’s supply-voltage limits, clock configuration, peripheral pin multiplexing, and ADC input requirements. Use the manufacturer’s pinout and application information when assigning communication and analog functions, and include appropriate decoupling and signal-conditioning arrangements around the MCU. Because the STM8S207R8T3 is a high-pin-count LQFP device, careful PCB layout is important for reliable soldering, short return paths, and stable peripheral operation. This product page combines the core STM8S207R8T3 specifications, package information, application guidance, and verified replacement candidates. It is intended to help engineers compare the MCU with same-package family options, plan PCB and peripheral assignments, and identify the technical differences that matter before approving a substitution.

RFQ צור קשר
STM8S207R8T6 - 24MHz 8-Bit MCU 64KB Flash | STMicroelectronics
STM8S207R8T6

STM8S207R8T6 - 24MHz 8-Bit MCU 64KB Flash | STMicroelectronics

The STMicroelectronics STM8S207R8T6 is a 24 MHz, 8-bit STM8S20xxx performance-line microcontroller with 64 KB of Flash program memory, integrated EEPROM, and a 64-pin LQFP package. It executes up to 20 MIPS at 24 MHz and combines an advanced 10-bit ADC with timers, two UARTs, SPI, I²C, and CAN connectivity. An 8-bit microcontroller is a compact processor optimized for embedded control, measurement, communications, and automation. The STM8S207R8T6 belongs to STMicroelectronics' STM8S family and is positioned as a high-density performance-line device. Its combination of EEPROM, serial peripherals, and CAN support allows designers to consolidate control logic that would otherwise require several discrete components. Principal features include a 24 MHz maximum CPU frequency, 64 KB of Flash memory, integrated EEPROM, and 10-bit analog-to-digital conversion. The device also provides 38 I/O ports, two UART interfaces, SPI and I²C serial buses, and CAN capability. A 3 V to 5.5 V operating-voltage range supports both 3.3 V and 5 V system architectures while allowing integration across industrial controls, communications equipment, and consumer products. The STM8 architecture provides a direct execution path for embedded firmware without an external instruction-memory interface. Hardware peripherals support serial data exchange, analog measurement, timing, and bus communication, reducing external component count and helping consolidate application logic. Maximum CPU operation at 24 MHz provides 20 MIPS of nominal instruction throughput, which is useful for responsive control loops and protocol handling. Typical applications include industrial automation controllers, CAN-connected equipment, serial data concentrators, motor and process control, programmable logic controllers, and compact consumer appliances. Its three principal bus and communication resources—UART, SPI, and I²C—support sensors, displays, transceivers, and external nonvolatile storage, while the 10-bit ADC supports analog monitoring. Design the PCB with short, terminated clock routes, decoupled supply pins, and a continuous ground plane. Confirm peripheral multiplexing, alternate-function assignments, and the 64-pin package pinout against the manufacturer documentation before finalizing routing. Firmware validation should include startup timing, watchdog behavior, bus contention, and CAN termination requirements for the selected system topology. This page consolidates the device's principal specifications, same-package replacement options, application guidance, and design considerations into a practical engineering reference. It also distinguishes verified electrical attributes from parameters that still require confirmation from the official STM8S207x datasheet and reference manual.

RFQ צור קשר
STM8S207RBT3 - 24MHz 128KB 8-Bit MCU | STMicroelectronics
STM8S207RBT3

STM8S207RBT3 - 24MHz 128KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207RBT3 is an 8-bit STM8S performance-line microcontroller with a 24 MHz CPU, 128 KB of Flash program memory and a 64-LQFP package measuring 10 x 10 mm. It belongs to the STM8S207RB device family and is positioned for embedded control applications requiring embedded Flash memory, a broad peripheral set and an established 8-bit architecture. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, communication peripherals and general-purpose I/O. The STM8S family follows the hierarchy microcontroller > embedded controller > semiconductor. STM8 devices combine an 8-bit CPU with peripherals that can control motors, read sensors, operate communication interfaces and manage digital equipment without requiring a separate processor and supporting logic. The STM8S207RBT3 provides 128 KB of Flash organized as 128K x 8 and operates at up to 24 MHz. STMicroelectronics describes it as part of the STM8S20xxx performance line, whose devices offer program-memory configurations from 32 to 128 KB. Its 64-LQFP package provides 64 electrical contacts and is suitable for compact industrial, consumer, communications and automation equipment. The STM8S207RB family is designed around an 8-bit CPU with dedicated peripheral resources for embedded control. The 24 MHz maximum operating frequency supports faster control loops and peripheral servicing than lower-frequency members of the STM8 family, while 128 KB of embedded Flash allows larger application code, bootloader logic and configuration data to be consolidated into one device. Typical applications include industrial control modules, motor and actuator controllers, communications equipment, sensor interfaces, appliance controllers and compact embedded platforms. The device is especially relevant where 128 KB of embedded program memory simplifies firmware deployment while the 64-LQFP package provides a conventional surface-mount footprint suitable for PCB assembly. PCB design should preserve the exact pin assignments, power requirements, decoupling and clock configuration defined in the STMicroelectronics DS5839 datasheet. Firmware migrations between orderable STM8S207RB variants should verify the temperature grade, package suffix and peripheral configuration before substitution. This page combines the manufacturer’s STM8S207RB family information with exact STM8S207RBT3 ordering data, package details, application guidance and engineering-focused design considerations. It helps buyers identify the correct MCU while making pin, memory, package and sourcing decisions with fewer document lookups.

RFQ צור קשר
STM8S207RBT6 - 24MHz 128KB 8-Bit MCU | STMicroelectronics
STM8S207RBT6

STM8S207RBT6 - 24MHz 128KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207RBT6 is an 8-bit STM8S performance-line microcontroller with a 24 MHz maximum CPU frequency, 128 KB of Flash program memory, 20 MIPS performance, and a 64-pin LQFP package measuring 10 x 10 mm. It is designed for embedded control applications requiring integrated communications, mixed-signal measurement, and broad peripheral support. An 8-bit microcontroller is a compact embedded computing device that executes firmware from nonvolatile Flash memory while using timers, serial interfaces, and analog inputs to control a target system. The STM8S207RBT6 belongs to the STM8S performance-line hierarchy of 8-bit RISC microcontrollers, combining an advanced Harvard-architecture core with integrated EEPROM, analog, timing, and communication peripherals. Key features include a maximum CPU frequency of 24 MHz, 128 KB of Flash, a three-stage pipeline, a 10-bit ADC, two UARTs, SPI, I2C, and CAN connectivity. According to the STM8S207RBT6 product information, these peripherals allow the device to consolidate functions that would otherwise require separate interface and conversion ICs. The LQFP-64 package also provides numerous general-purpose I/O pins for external sensing, actuation, and communication connections. The STM8 core uses Harvard architecture, separating instruction and data access paths, while the three-stage pipeline supports efficient instruction throughput. At the maximum 24 MHz operating frequency, the device delivers up to 20 MIPS. Integrated EEPROM supports parameter and configuration storage, although its exact capacity must be confirmed from the complete manufacturer datasheet before it is reserved in firmware. Typical applications include industrial controllers, motor-control and automation equipment, communication modules, building-control interfaces, consumer appliances, and compact embedded control panels. CAN, SPI, I2C, and UART support is particularly useful for systems that must connect sensors, actuators, human-interface modules, or service buses while retaining a compact embedded-control architecture. Designers should verify the complete 64-pin pinout, peripheral alternate-function mappings, clock configuration, and decoupling requirements against the manufacturer datasheet. The 10 x 10 mm LQFP footprint is easy to inspect after soldering, but its fine-pitch leads still require careful land-pattern and paste-volume control for reliable assembly. This product page consolidates verified manufacturer and distributor information, package details, sourcing data, application guidance, and temperature-grade replacement options into an engineering-focused reference. It distinguishes exact drop-in options from broader functional comparisons so designers can make a package- and pin-compatible selection without overlooking software or qualification constraints.

RFQ צור קשר