מוצרים (42,000+)

XC9536XL-7CS48C - 36-Macrocell 3.3V CPLD | AMD Xilinx
XC9536XL-7CS48C

XC9536XL-7CS48C - 36-Macrocell 3.3V CPLD | AMD Xilinx

AMD Xilinx XC9536XL-7CS48C is a 3.3 V complex programmable logic device with 36 macrocells, 36 user I/O pins, approximately 800 usable gates, and a 125 MHz maximum operating frequency in a 48-ball CSBGA package. The suffix identifies a 7 ns speed grade, commercial temperature grade, and the CS48C package configuration. It belongs to the XC9500 family of flash-based CPLDs intended for deterministic logic implementation without an external configuration device. A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple logic functions and non-volatile configuration memory into one integrated device. In the product hierarchy, a CPLD is a user-programmable logic device, a form of programmable logic, and a complement to FPGA technology. CPLDs are especially useful for interface logic, control sequencing, glue logic, bus arbitration, and other designs requiring deterministic startup and compact implementation. The XC9536XL provides 54V18 function blocks, a 5 ns pin-to-pin propagation-delay specification, and an in-system programmable architecture supporting at least 10,000 program and erase cycles. Its 3.3 V operating supply is suitable for modern control and interface circuits. The 36 macrocells can be interconnected to implement combinational and registered logic, while 36 I/O pins provide connections to external digital signals. The device uses a 0.35 µm CMOS process and is configured from flash memory, so the programmed logic remains available after power is removed without continuous configuration downloads. Its non-volatile architecture makes it appropriate for industrial controllers, embedded equipment, peripheral interfaces, and legacy platform support where predictable power-up behavior is important. Programming is handled with the AMD/Xilinx device-programming flow for the XC9500 family. Typical applications include industrial control and automation, peripheral interface bridges, embedded system glue logic, data-acquisition equipment, communication-control logic, and compact commercial controller boards. The commercial-grade XC9536XL-7CS48C is most appropriate when the system operates in a commercial temperature environment and does not require an industrial-qualified suffix. PCB design requires careful BGA escape routing, unobstructed access for programming or inspection, and clean power and ground distribution. Because the device is flash-programmable, engineers should verify the intended configuration file, programming algorithm, and board-level power sequence before production. The 48-ball CSBGA land pattern should be compared directly with the manufacturer package drawing rather than inferred from a generic BGA footprint. This product record combines the manufacturer datasheet, package characteristics, device architecture, programming considerations, and same-family drop-in comparisons. It also provides application-specific guidance and identifies practical distinctions among speed-grade, voltage, and temperature options so that engineers can select the correct XC9500-family device without assuming that every related MPN is interchangeable.

RFQ צור קשר
XC9536XL-7CS48I - 36-Macro-Cell 3.3V CPLD | AMD
XC9536XL-7CS48I

XC9536XL-7CS48I - 36-Macro-Cell 3.3V CPLD | AMD

The AMD XC9536XL-7CS48I is a 3.3 V complex programmable logic device in the XC9500XL family, providing 800 usable gates, 36 macro cells, and a maximum operating frequency of 125 MHz in a 48-pin CSBGA package. The -7 speed grade offers 5 ns propagation delay, making the device suitable for deterministic glue-logic, control, interface, and signal-conditioning implementations. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines programmable logic blocks, programmable interconnect, and I/O resources into a compact logic platform. The CPLD category belongs to programmable logic devices and sits below FPGA & CPLD in the broader integrated-circuit hierarchy. Unlike fixed-function logic, a CPLD allows designers to implement multiple digital functions in one device and revise the configuration during development. The XC9536XL uses two 54V18 function blocks and provides 36 macro cells with 800 usable gates. Its 3.3 V operating supply, 125 MHz maximum frequency, and 5 ns propagation delay support high-speed control logic where deterministic response and compact integration are important. The device also uses 0.35 μm CMOS technology and provides 36 I/O resources in its 48-terminal CSBGA package. This architecture is intended for communications and computing systems where compact logic consolidation can reduce component count and board area. Each macro cell supports programmable combinational or registered logic, while the embedded programmable interconnect routes signals among function blocks and I/O pins. This makes the XC9536XL suitable for implementing address decoding, control sequencing, state machines, bus arbitration, data routing, and peripheral-interface logic in a single programmable device. Typical uses include communications equipment, embedded control systems, industrial automation modules, test equipment, and computer peripheral interfaces. A design can place several small gate-level functions into one XC9536XL rather than using separate AND, OR, counter, or latch packages. Because the device is nonvolatile and programmable, logic revisions can also reduce assembly changes when interfaces evolve. The primary design consideration is PCB layout around the 48-pin CSBGA footprint and verification of the pin assignment against the selected CS package variant. Engineers should also confirm the -7 timing grade, industrial-temperature requirement, and 3.3 V interface conditions against the system timing budget. Because a CPLD is not an FPGA, designs requiring large on-chip memories, soft processors, or very high logic density should use an appropriate FPGA architecture instead. This product page combines the AMD XC9536XL device characteristics, package details, and drop-in family options with practical guidance for timing, PCB implementation, and replacement planning. It also distinguishes exact package and temperature-grade changes from speed-grade changes that may require timing revalidation.

RFQ צור קשר
XC9536XL-7CSG48C - 36-Macrocell 3.3V CPLD | AMD
XC9536XL-7CSG48C

XC9536XL-7CSG48C - 36-Macrocell 3.3V CPLD | AMD

The AMD XC9536XL-7CSG48C is a 3.3 V in-system-programmable CPLD with 36 macrocells, 36 I/O lines, a 7.5 ns propagation delay, and a 138.88 MHz maximum clock frequency. The device is packaged in a 48-ball, 7 mm × 7 mm CSBGA and is intended for compact designs requiring deterministic programmable logic. A complex programmable logic device, or CPLD, is a programmable-logic architecture that combines multiple macrocells and programmable interconnect resources into a single integrated circuit. The XC9500 family provides a practical bridge between simple GAL-type logic and larger FPGAs. It belongs to the hierarchy programmable logic device → CPLD → programmable-logic semiconductor, offering nonvolatile configuration and in-system programmability for glue logic, control logic, and interface adaptation. The XC9536XL provides 36 macrocells and 36 available I/O lines in a compact CSBGA-48 package. Its 7.5 ns pin-to-pin propagation-delay grade supports moderate-speed control and data-routing tasks, while the stated 138.88 MHz maximum clock frequency establishes the device’s operating performance ceiling. Flash-based configuration supports at least 10,000 program and erase cycles, and JTAG Boundary Scan Test provides a structured method for board-level testing. Programmable architecture makes the same physical device useful across multiple board revisions because logic equations, interconnections, and I/O behavior can be changed without replacing the package. The 3.3 V supply arrangement and 48-ball surface-mount format support compact industrial, communications, control, and embedded-equipment designs. Commercial-temperature selection is denoted by the C suffix, while the separate I suffix identifies an industrial-temperature option in the same device family. Typical uses include bus decoding, address and command generation, legacy-interface bridging, state-machine control, peripheral interconnection, and board-level glue logic. The combination of 36 macrocells and 36 I/Os is particularly useful when several fixed-function gates would otherwise require several separate standard logic devices. JTAG Boundary Scan Test also supports board bring-up and production test in multi-IC assemblies. PCB implementation requires careful treatment of the fine-pitch CSBGA footprint, power and ground distribution, and high-speed clock routing. The design should use the package-specific land pattern and ball assignment from the manufacturer package information, maintain continuous return paths beneath clock nets, and route JTAG signals with attention to signal integrity. Programming should follow the AMD/Xilinx device-programming procedure for the selected CPLD family. This page combines the manufacturer’s XC9536XL device documentation with package, programming, comparison, and replacement information for engineers evaluating the XC9536XL-7CSG48C. It also identifies same-package speed- and temperature-grade alternatives while preserving the distinction between a true PCB drop-in option and a merely functionally similar CPLD.

RFQ צור קשר
XC9536XL-7CSG48I - 36-Macrocell 3.3V CPLD | AMD
XC9536XL-7CSG48I

XC9536XL-7CSG48I - 36-Macrocell 3.3V CPLD | AMD

The AMD XC9536XL-7CSG48I is a 3.3 V complex programmable logic device containing 36 macrocells and approximately 800 programmable logic gates in a 48-CSBGA surface-mount package. Its -7 speed designation corresponds to a maximum propagation delay of 7.5 ns, making it suitable for systems requiring deterministic combinational and registered logic in a compact, nonvolatile programmable device. A CPLD is a user-programmable semiconductor that combines configurable logic and programmable interconnect structures. It belongs to the FPGA and CPLD category, where an FPGA provides broad gate-level programmability and a CPLD provides a more structured macrocell architecture for control logic, decoding, interface bridging, and fixed-function state machines. The XC9536XL family combines repeatable timing, nonvolatile configuration, and in-system programmability without the resource complexity of a large FPGA. The XC9500XL architecture provides 36 macrocells and 36 I/O positions. The device operates from a 3 V to 3.6 V internal supply and supports at least 10,000 program or erase cycles. The -7 grade provides a 7.5 ns maximum propagation delay, while the -I suffix identifies the industrial temperature option. Its 48-CSBGA package reduces board area compared with leaded packages but requires careful assembly and escape-routing planning because signal access beneath the BGA is constrained. The XL designation refers to the extended XC9500 architecture, while CSG48 identifies the package family and pin count. This device is useful when the design must be implemented as a compact, deterministic logic block rather than a processor-based solution. In-system programmability allows configuration updates, boot-time personality selection, or field reconfiguration when supported by the surrounding system architecture. The manufacturer datasheet remains the controlling reference for pin assignments, configuration behavior, timing, and absolute electrical limits. Typical uses include industrial control logic, peripheral address decoding, data-format conversion, bus-interface translation, compact coprocessor logic, legacy protocol handling, and system-boot coordination. The 36-macrocell capacity is particularly appropriate for multiple state machines, latch arrays, and combinational control paths. Designs requiring substantially more parallel logic, block RAM, high-speed transceivers, or soft processors should use a larger programmable-logic device instead. PCB implementation should prioritize BGA fanout, uninterrupted ground-plane continuity, and short connections to bypass capacitors. Because the 48-CSBGA footprint provides dense underside access, a multilayer board with solid ground planes is generally preferable to a two-layer assembly. Validate assembly capability, solder-paste volume, via-in-pad requirements, and component spacing against the manufacturer package drawing before release. This product page combines the XC9536XL device characteristics, verified distributor availability, same-package replacement analysis, comparison parameters, and practical implementation guidance. It helps engineers determine whether the XC9536XL-7CSG48I offers the required logic density, timing, voltage, package, and lifecycle fit before beginning a PCB or firmware design.

RFQ צור קשר
XC9536XL-7PC44C - 36-Macrocell CPLD, 34 I/O | Xilinx
XC9536XL-7PC44C

XC9536XL-7PC44C - 36-Macrocell CPLD, 34 I/O | Xilinx

The Xilinx XC9536XL-7PC44C is a high-performance, in-system-programmable CPLD with 36 macrocells, 34 user I/O pins, 800 usable gates, and a 44-pin PLCC package designated QCCJ. It operates from 3.3 V, supports at least 10,000 program-and-erase cycles, and is built on 0.35 µm CMOS technology. The -7 speed designation corresponds to a 178.6 MHz device rating, while the C suffix identifies the commercial temperature grade. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines a flexible logic architecture with nonvolatile configuration storage. CPLDs occupy the middle ground between simple programmable logic arrays and larger FPGAs. They are commonly used for glue logic, bus decoding, interface adaptation, state machines, address decoding, and control logic that benefits from fast deterministic routing and in-system reconfiguration. The XC9536XL architecture provides 54V18 function blocks, 36 macrocells, and approximately 800 usable gates. Its 34 I/O pins support the integration of multiple control and data signals in a compact device. In-system programmability allows the configuration memory to be updated while the circuit remains operational, making the CPLD useful for field upgrades, production programming, and prototype refinement without replacing the device. The XC9536XL-7PC44C uses 3.3 V CMOS technology and is specified in a 44-pin J-lead PLCC package with a square package code of QCCJ. Its 5 ns propagation-delay value provides deterministic behavior for control logic, while the 178.6 MHz speed rating supports clocked state machines and moderately timed interface functions. The commercial grade and 0.35 µm process place this device in a mature programmable-logic family. Typical applications include industrial control interfaces, peripheral bus decoding, instrumentation logic, embedded-system address translation, data acquisition control, and legacy platform consolidation. The 34-I/O count makes the device especially suitable for designs that need more logic than a small GAL or simple microcontroller output can provide, without requiring a large FPGA. PCB design should preserve the PLCC footprint and route programming and control signals away from high-speed or switching nodes. Use the manufacturer pin description table when assigning tracks, confirm decoupling requirements from DS058, and validate every external interface against the selected I/O standard. Because the device is lead-containing and RoHS non-compliant, its regulatory status must be considered for new commercial and export-sensitive designs. This page combines the device architecture, verified specifications, package details, drop-in alternatives, comparison data, and practical implementation guidance to support design selection, footprint verification, sourcing, and lifecycle-risk assessment.

RFQ צור קשר
XC9536XL-7PC44I - 36-Cell 7.5ns Flash CPLD | AMD
XC9536XL-7PC44I

XC9536XL-7PC44I - 36-Cell 7.5ns Flash CPLD | AMD

The AMD XC9536XL-7PC44I is a 36-cell FLASH complex programmable logic device with a 7.5 ns speed grade, 800 usable gates, 34 user I/Os, and a 44-pin PLCC package. Designed for industrial-temperature applications, the XC9536XL-7PC44I combines in-system programmability, test capabilities, and 3.3 V CMOS operation in a compact surface-mount package. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that converts Boolean equations and state-machine logic into a fixed digital circuit. Within the programmable-logic hierarchy, a CPLD belongs to the broader PLD family and provides an alternative to FPGA implementations when relatively compact logic, predictable timing, and in-system reconfiguration are important. The XC9500XL architecture uses interconnected function blocks and programmable interconnect resources to implement control, interface, and glue-logic functions. The XC9536XL-7PC44I provides 36 macrocells and 800 usable gates. Its 7.5 ns propagation-delay grade supports logic operating in the approximately 200 MHz internal-frequency class reported for this device family. Thirty-four user I/Os provide connections to external control and interface circuits. Because the part is FLASH-programmable, logic can be updated in circuit without removing the device, which is useful during prototype debugging, production configuration, and field maintenance. The XC9500XL family architecture is organized around two 36V18 function blocks, providing 800 usable gates and programmable routing between logic elements. Its enhanced pin-locking capability supports migration across density options within a compatible package footprint. The 7.5 ns speed grade distinguishes this industrial-temperature, PLCC-44 version from faster or slower members of the same family. Typical uses include industrial relay and monitoring control, programmable interface logic, bus decoding, sequencing, and embedded control glue logic. The XC9536XL-7PC44I is also appropriate for compact legacy systems that already use a 44-pin footprint and require a direct migration path to the XL device family. Designers must verify voltage compatibility, I/O standards, timing constraints, programming hardware, and the exact pin arrangement before substituting any alternative. For a robust board layout, place the device close to its support circuitry and route programming signals away from sensitive analog or high-speed nets. Follow the manufacturer datasheet for supply decoupling, ISP connections, test pins, and unused-pin treatment. Confirm that the existing PCB land pattern and pin assignments match the selected device ordering code before releasing a replacement order. This page combines the device architecture, ordering-code differences, verified package characteristics, and migration guidance with drop-in alternatives for engineering review. It also highlights the checks needed to distinguish an electrical drop-in from a merely similar CPLD before any board-level replacement is approved.

RFQ צור קשר
XC9536XL-7PCG44C - 36-Macrocell 3.3V CPLD | Xilinx
XC9536XL-7PCG44C

XC9536XL-7PCG44C - 36-Macrocell 3.3V CPLD | Xilinx

The Xilinx XC9536XL-7PCG44C is a 3.3 V in-system-programmable Flash CPLD with 36 macrocells, 34 user I/O pins, two 54V18 function blocks, and 800 usable gates in a 44-pin PLCC package. The -7 speed grade supports a maximum pin-to-pin propagation delay of 7.5 ns, making it suitable for general-purpose glue logic, control logic, bus interfacing, and legacy platform consolidation. A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor that combines interconnected macrocells, embedded Flash memory, and programmable interconnect resources. It belongs to the logic hierarchy that includes programmable logic devices, FPGA and CPLD devices, and general-purpose semiconductors. Unlike a fixed-function application-specific integrated circuit, a CPLD can be reprogrammed to implement several hardware configurations while retaining nonvolatile configuration memory. The XC9536XL architecture provides two 54V18 function blocks and 34 user I/O pins. Its in-system programming capability supports at least 10,000 program and erase cycles according to the product specification. A 200 MHz internal-frequency figure is also listed for this exact device. These characteristics make the part useful for compact controllers, peripheral adapters, industrial control logic, and legacy systems that need deterministic combinational and registered logic. The XC9500XL family architecture supports advanced in-system programming and test functions. The XC9536XL variant combines two high-performance function blocks with 800 usable gates, while the -7 suffix identifies its speed class. A maximum 7.5 ns propagation delay is important when designing timing closures around address decoding, control sequencing, and handshake logic. The device operates from a 3 V to 3.6 V internal supply, matching the listed 3.3 V operating class. Typical applications include industrial equipment control, communication-interface conditioning, data-acquisition modules, embedded peripheral bridging, and legacy control-system refreshes. In each case, the 36 available macrocells can be assigned to Boolean equations, counters, state machines, address decoding, and programmable interface functions. The 34 user I/O pins provide enough external connectivity for systems requiring moderate pin density rather than a large FPGA. Designers should preserve the PLCC footprint and verify signal standards, supply voltage, I/O limits, and timing before replacing an existing XC9536XL assembly. The nonvolatile ISP architecture simplifies field updates, but programming tools and the device configuration file remain part of the design dependency. Because this orderable variant is marked obsolete, an existing supported design should normally remain on the exact MPN rather than substitute a speed or temperature-grade variant without timing review. This page combines the verified device specifications, package information, lifecycle status, pinout availability, drop-in family variants, and practical design guidance. It also provides application-focused engineering context and a parameter comparison to help engineers assess whether the obsolete XC9536XL-7PCG44C still matches the electrical and mechanical requirements of an existing design.

RFQ צור קשר
XC9536XL-7VQ44C - 36-Macrocell 3.3V CPLD | Xilinx
XC9536XL-7VQ44C

XC9536XL-7VQ44C - 36-Macrocell 3.3V CPLD | Xilinx

The Xilinx XC9536XL-7VQ44C is a 36-macrocell, in-system programmable complex programmable logic device with 34 I/O pins, a 3 V to 3.6 V supply range, and a 44-pin VQFP package. It provides approximately 800 usable gates and a maximum propagation delay of 7.5 ns, making it suitable for compact interface, control, glue-logic, and legacy platform designs. A complex programmable logic device is a user-programmable semiconductor that combines nonvolatile configuration memory, programmable logic elements, interconnect resources, and general-purpose I/O. Within the broader hierarchy, a CPLD is a programmable logic device and semiconductor, positioned between discrete logic and larger programmable FPGA fabrics. The XC9500XL family is intended for designs requiring deterministic routing and stable logic implementation in moderate logic-density applications. Key device features include 36 macrocells, 34 I/O pins, and approximately 800 usable gates. The device supports in-system programming with at least 10,000 program and erase cycles, allowing logic configuration to be updated without removing it from its circuit board. Its specified operating supply range is 3 V to 3.6 V, while its operating temperature range is -40°C to +85°C. The XC9536XL-7VQ44C uses the FastCONNECT II switch-matrix architecture and contains 54V18 function blocks. According to the XC9536XL manufacturer datasheet, the associated logic implementation provides predictable timing across programmable configurations. These characteristics make the device useful for bus decoding, state-machine control, display and peripheral interfacing, legacy system control, and fixed-function logic that must be reconfigured during manufacturing or field updates. Typical applications include industrial automation, consumer electronics, telecommunications, embedded control panels, and board-level interface consolidation. The 34 available I/O pins provide sufficient connectivity for parallel buses, control signals, status indicators, and communication interfaces. In-System Programmability is particularly useful when production configurations, revision logic, or board test sequences vary between assembled units. When designing around this CPLD, confirm the voltage requirements of every attached I/O device before connecting it to the 3.3 V core. Keep programming access routed for reliable in-system operation, and account for signal conditioning, series resistance, and connector loading on externally exposed pins. The package also contains lead and is identified as RoHS non-compliant, which must be considered for regulated and environmentally restricted production programs. This page consolidates the device specifications, family alternatives, package constraints, and practical implementation guidance engineers need when evaluating the XC9536XL-7VQ44C for an existing 44-pin CPLD design.

RFQ צור קשר
XC9536XL-7VQ44I - 36-Macrocell 3.3V CPLD | AMD
XC9536XL-7VQ44I

XC9536XL-7VQ44I - 36-Macrocell 3.3V CPLD | AMD

The AMD XC9536XL-7VQ44I is a 3.3 V in-system programmable complex programmable logic device (CPLD) with 36 macrocells, 34 I/O pins, and a 44-pin VQFP package. It provides 7.5 ns-class propagation performance and uses Flash-based configuration memory for in-system programming and boundary-scan support. The XC9500XL family targets high-performance, low-voltage communications and computing systems where low power dissipation and device reliability are important. A CPLD is a programmable logic device that combines reconfigurable logic fabric with nonvolatile configuration memory. Within the product hierarchy, a CPLD is a programmable logic device, which is a type of semiconductor and digital logic IC. Unlike a fixed-function controller, the XC9536XL-7VQ44I can implement multiple digital functions in one device, including state machines, address decoding, interface logic, and control logic. The device provides 36 macrocells and 34 I/O pins in a compact 44-pin VQFP package. Its architecture includes 54V18 function blocks providing 800 usable gates, while the -7 speed designation identifies the device's 7.5 ns propagation-delay class. In-system programming supports configuration over the device's programming interface, and IEEE Std 1149.1 JTAG boundary scan supports inspection and debugging during hardware development. The XC9500XL architecture is intended for low-voltage operation and high-performance logic implementations. Its Flash-based configuration retains the programmed logic when power is removed, eliminating separate configuration-memory components. The I/O structure supports system integration at 3.3 V, with 5 V tolerant I/O capability described for this device family, allowing selected external signals to exceed the nominal core voltage under appropriate operating conditions. Typical applications include communications equipment, computing systems, industrial control, peripheral glue logic, bus-interface decoding, and compact control subsystems. The 36-macrocell capacity is particularly useful for designs requiring several interacting state machines or glue functions without implementing a larger programmable-logic device. Its 44-pin VQFP package also supports conventional board-level assembly and inspection. Designers should confirm pin assignments, voltage tolerances, programming requirements, and timing constraints against the manufacturer datasheet before layout release. Boundary-scan access is useful during bring-up, but production programming should use the documented device algorithm and supported programming hardware. Care is also required when combining 5 V tolerant inputs with 3.3 V outputs because voltage-tolerance conditions are not identical to output drive capability. This page consolidates device specifications, verified source links, engineering alternatives, comparison parameters, and practical design guidance for engineers evaluating the AMD XC9536XL-7VQ44I for compact low-voltage programmable-logic designs.

RFQ צור קשר
XC9536XL-7VQ64C - 36-Macrocell 3.3V CPLD | AMD
XC9536XL-7VQ64C

XC9536XL-7VQ64C - 36-Macrocell 3.3V CPLD | AMD

AMD XC9536XL-7VQ64C is a 3.3 V complex programmable logic device with 36 macrocells, 36 I/O pins, 800 usable gates, and a 64-pin VQFP package. It is based on two 54V18 function blocks and provides a 7.5 ns propagation delay for the specified -7 speed grade. The device supports in-system programming and IEEE Std 1149.1 JTAG boundary-scan, making it suitable for compact communications, computing, control, and general-purpose logic designs. A CPLD is a programmable logic device that combines a structured array of logic macrocells with electrically erasable configuration memory. It belongs to the programmable-logic hierarchy alongside FPGAs, but typically offers simpler timing behavior, deterministic interconnect, and straightforward in-system reconfiguration. The XC9536XL family is positioned for low-voltage systems requiring moderate logic density and reliable nonvolatile configuration retention. The XC9536XL-7VQ64C provides 36 macrocells and 36 user I/O pins, with two 54V18 function blocks forming the device core. Its 800 usable gates support control logic, interface translation, state machines, data capture, and fixed-format peripheral bridging. In-system programming supports at least 10,000 program or erase cycles, while JTAG boundary-scan assists board-level validation and production test. The device operates from a 3.0 V to 3.6 V supply. Its -7 speed designation corresponds to a 7.5 ns propagation delay, whereas related family documentation also describes a 5 ns delay for other speed grades. The difference must be considered when defining clock and data-path constraints. Because all I/O and configuration signals share the device's 3.3 V domain, board designers should confirm input thresholds, output drive, and external interface levels against the manufacturer pin and timing tables. Typical uses include low-voltage communications interface logic, embedded control sequencing, data-acquisition front ends, peripheral emulation, and general-purpose glue logic. JTAG boundary-scan is particularly valuable in multi-board systems because it supports controlled interconnect testing during manufacturing and diagnostic operations. PCB implementation should preserve the manufacturer's 64-pin VQFP footprint, power and ground connections, decoupling strategy, and programming access. Place the input and output bypass capacitors close to their associated pins and route JTAG and configuration signals away from sensitive analog or high-speed nets. Validate timing at the selected system operating speed rather than relying only on the device's headline propagation delay. This page combines device specifications, family-level drop-in options, application guidance, and design notes to support component selection, PCB compatibility checks, and production sourcing. It also distinguishes verified electrical characteristics from parameters that still require confirmation from the full manufacturer datasheet.

RFQ צור קשר
XC9536XL-7VQ64I - 36-Macrocell 3.3V CPLD | AMD Xilinx
XC9536XL-7VQ64I

XC9536XL-7VQ64I - 36-Macrocell 3.3V CPLD | AMD Xilinx

The AMD Xilinx XC9536XL-7VQ64I is a 3.3 V in-system programmable CPLD containing 36 macrocells and 36 user I/O pins in a 64-pin VTQFP package. It provides 800 usable gates, 5 ns pin-to-pin propagation delay, and an internal system frequency listed up to 125 MHz. The device is designed for compact programmable logic, control, glue logic, and interface implementations requiring nonvolatile in-system reprogrammability. A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy alongside FPGA technology. Unlike mask-programmed fixed logic, a CPLD retains its programmed configuration in nonvolatile memory. The XC9536XL family combines macrocell-based logic with user I/O resources, making it useful for consolidating control logic, decoding, state machines, bus interface logic, and fixed-format glue functions into a relatively small device. The principal device attributes include 36 macrocells, 36 I/O pins, 3.3 V operation, 5 ns propagation delay, and 800 usable gates. Its I/O arrangement is intended for 3.3 V systems, while associated family information also identifies 5 V tolerant inputs and 2.5 V output capability. At least 10,000 program and erase cycles are specified for the in-system programmable configuration memory, allowing repeated field updates when the design, configuration data, or board behavior changes. The XC9536XL uses a macrocell-centered architecture in which each macrocell contributes combinational and registered logic resources. This structure gives the device deterministic programmable logic rather than the block-routing architecture of an FPGA. The XC9536XL-7 speed designation corresponds to the 5 ns performance grade identified for this family, making it more appropriate for timing-sensitive control paths than the slower -10 grade. The 0.35 µm CMOS implementation is a legacy process technology associated with the original XC9500XL generation. Typical uses include industrial control, instrumentation, power-system sequencing, peripheral interfacing, data acquisition, and legacy equipment upgrades. It is particularly useful when a board already contains a programmed XC9500XL design and needs another density or speed grade that remains mechanically and electrically compatible. The 64-pin package also supports designs needing more I/O than the smaller family members while avoiding a larger package. Design planning should verify the exact pin assignments, power rails, configuration pins, and I/O voltage assumptions in the manufacturer datasheet before layout release. Because this legacy family was created for 0.35 µm CMOS designs, software support and programming-cable compatibility can determine whether an unchanged architecture remains practical for a new production run. This product analysis combines the device architecture, programming characteristics, package information, timing grade, and directly comparable same-family options into an engineering-focused guide. It also distinguishes true package-compatible replacements from larger XC9500XL devices that require different footprints, helping designers avoid a replacement that changes the PCB rather than merely changing a bill-of-materials line.

RFQ צור קשר
XC9536XL-7VQG64C - 36-Macrocell 3.3V CPLD | AMD
XC9536XL-7VQG64C

XC9536XL-7VQG64C - 36-Macrocell 3.3V CPLD | AMD

AMD XC9536XL-7VQG64C is a 36-macrocell in-system programmable CPLD with 36 I/O, a 7.5 ns maximum pin-to-pin propagation delay, and a 3 V to 3.6 V internal supply range, housed in a 64-pin VTQFP package. The device provides 800 usable gates and a 125 MHz operating frequency within the FastFLASH XC9500XL family. A CPLD, or complex programmable logic device, is a programmable semiconductor that combines nonvolatile configuration memory, logic macrocells, and programmable I/O blocks. The XC9500XL family combines that architecture with in-system programming and IEEE Std 1149.1 JTAG boundary scan. This places the device in the hierarchy of programmable logic devices, alongside FPGAs and PAL-type programmable devices, while retaining a comparatively simple architecture for compact control, interface, and glue-logic designs. Key features include 36 macrocells, 36 user I/O, 800 usable gates, a 125 MHz maximum operating frequency, and 5 ns pin-to-pin logic delays as described for the family. In-system programming supports at least 10,000 program and erase cycles. JTAG boundary scan supports boundary testing, configuration debugging, and design iteration, while the 3.3 V supply range targets low-voltage communications and computing equipment. The XC9536XL architecture drives macrocell outputs directly into programmable I/O blocks, allowing logic functions to be assigned to available package pins through the configuration file. The -7 speed designation identifies the device timing grade associated with the 7.5 ns maximum propagation-delay listing. This grade is appropriate when design timing closes below the rated limit with the selected system clock, external interface, and loading conditions. Typical uses include interface bridging, control logic, state machines, bus decoding, peripheral control, and compact communications equipment. The 36 available I/O make it particularly useful for designs that need moderate parallel connectivity without the resource count and configuration complexity of a larger FPGA. JTAG also makes the device convenient for production programming, board validation, and field debugging. Designers should preserve the CPLD supply decoupling, route programming and JTAG signals carefully, and verify every external pin against the exact 64-pin package drawing. Although its nominal supply is 3.3 V, XC9536XL is not automatically interchangeable with a 5 V XC9536 design because the original family used 5 V I/O, while XC9500XL targets 3.3 V operation. This page combines the manufacturer device characteristics with practical programming, replacement, routing, and compatibility guidance. It also distinguishes speed-grade alternatives that preserve the 36-macrocell, 36-I/O architecture while changing timing or temperature qualification.

RFQ צור קשר
XC9536XL-7VQG64I - 36-Macrocell 3.3V CPLD | AMD/Xilinx
XC9536XL-7VQG64I

XC9536XL-7VQG64I - 36-Macrocell 3.3V CPLD | AMD/Xilinx

The AMD/Xilinx XC9536XL-7VQG64I is a 36-macrocell, 3.3 V in-system-programmable CPLD with 36 user I/O pins, approximately 800 usable gates, and a 64-pin VTQFP package. Its -7 speed designation corresponds to a maximum propagation delay of 7.5 ns, supporting general-purpose glue logic, control logic, interface adaptation, and legacy industrial system designs. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple programmable logic blocks with I/O structures. It occupies the broader hierarchy of programmable logic devices, alongside FPGAs, and is used to implement fixed or configurable digital functions. The XC9500XL architecture provides nonvolatile configuration, in-system programmability, and repeatable programming suitable for established control and interface products. The device provides 36 macrocells, 36 user I/O pins, and about 800 usable gates. Its architecture uses 54V18 function blocks and drives I/O blocks directly from the function-block outputs. In-system programmability supports at least 10,000 program and erase cycles, while enhanced pin-locking capability helps preserve board-level routing assignments during design migration within the XC9500XL family. The XC9500XL family uses 0.35 µm CMOS technology and operates from a 3.0 V to 3.6 V supply range. The XC9536XL-7VQG64I is identified as an industrial-grade variant in a 64-pin VTQFP package. The G package designation denotes a lead-free package, and product listings identify the device as RoHS compliant. Programmable transition behavior permits specified transient overshoot and undershoot during device state changes when the relevant duration and current limits are respected. Typical applications include industrial automation, embedded control, legacy peripheral control, programmable interface logic, board-level glue logic, and system power-sequencing support. Its 36 I/O pins make it useful where several digital lines must be routed among processors, memory devices, sensors, and communications interfaces while retaining a compact, nonvolatile logic implementation. Designers should preserve the device's 3.3 V supply assumptions and verify every signal against the XC9536XL DS058 pin table before PCB release. Use the manufacturer pinout and power-decoupling recommendations, connect the programming interface according to the defined JTAG or boundary-scan arrangement, and validate timing with the speed grade used in the original design. The -7 variant provides a 7.5 ns maximum propagation delay. This page combines the key family-level specifications, practical implementation guidance, same-footprint upgrade paths, and engineering trade-offs for engineers evaluating the XC9536XL-7VQG64I or planning a controlled migration to another XC9536XL speed, package, or temperature option.

RFQ צור קשר
XC9536XV-5VQ44C - 5ns 2.5V CPLD, 44-TQFP | AMD
XC9536XV-5VQ44C

XC9536XV-5VQ44C - 5ns 2.5V CPLD, 44-TQFP | AMD

The AMD XC9536XV-5VQ44C is a 2.5 V complex programmable logic device (CPLD) with 800 usable gates, two 54V18 function blocks, 34 I/O, and a maximum 5 ns pin-to-pin propagation delay, housed in a 44-pin TQFP surface-mount package. It combines in-system programmability, FastFLASH technology, low-power operation, and multi-voltage support for high-performance communications and computing systems. A CPLD is a programmable logic device that combines multiple programmable logic blocks with a deterministic interconnect structure. It occupies the hierarchy above basic programmable logic arrays but below field-programmable gate arrays, providing fixed in-system reconfiguration capability for glue logic, control logic, bus decoding, interface adaptation, and compact state-machine implementation. FastFLASH technology supports convenient configuration and reprogramming, while in-system programmability allows logic updates without removing the device from its circuit. The XC9536XV family provides 800 usable gates across two 54V18 function blocks. Its -5 speed designation corresponds to a 5 ns maximum pin-to-pin logic delay, making it suitable for communications, computing, and embedded control paths with defined timing requirements. The internal core voltage range is 2.37 V to 2.62 V. The device also supports multiple I/O voltage operation, allowing interface compatibility with surrounding system logic when the applicable voltage combinations are observed. The 44-pin package provides 34 usable I/O in the cited configuration and a surface-mount form factor suitable for automated assembly. Programmable functions are divided between two 54V18 blocks, enabling medium-density combinational and sequential logic without the resource overhead of a large FPGA. The architecture is particularly useful for deterministic control paths, peripheral interfacing, data-format conversion, and compact protocol handling where reusability and in-system programming are important. Typical uses include communications interface logic, embedded computing control, bus arbitration, peripheral bridging, and low-latency state-machine implementations. In each case, the device consolidates several small logic functions into one programmable component, reduces discrete gate count, and allows firmware-linked design revisions. A designer can also use the XC9572XV family member when additional logic capacity is needed while retaining the same package and voltage-oriented family platform. Designers should verify the complete pin description, supported I/O standards, configuration pins, and electrical constraints in the manufacturer datasheet before layout release. The package drawing and pin numbering must match the 44-TQFP footprint, while power and ground distribution should follow the datasheet recommendations for reliable signal integrity and predictable device operation. This page combines the XC9536XV device architecture, exact ordering information, practical logic-design guidance, and a parameter-focused comparison with supported same-footprint alternatives. It highlights the engineering trade-offs among speed grades and logic capacities while keeping purchasing, availability, and replacement questions aligned with the Request a Quote process on this page.

RFQ צור קשר
XC9572-10PC44C - 72-Macrocell 5V In-System CPLD | AMD
XC9572-10PC44C

XC9572-10PC44C - 72-Macrocell 5V In-System CPLD | AMD

AMD XC9572-10PC44C is a 72-macrocell, 5 V in-system programmable complex programmable logic device (CPLD) in a 44-pin PLCC package. It provides approximately 1,600 usable logic gates, 34 user I/O pins, 10 ns-class propagation delay, and operation from 4.5 V to 5.5 V. The device uses advanced CMOS 5 V FastFLASH technology and supports parallel programming of multiple XC9500-family devices. A CPLD is a programmable logic device that combines multiple logic functions into one integrated circuit. Its architecture is organized into interconnected function blocks and macrocells, allowing relatively compact logic designs to replace multiple programmable logic devices and discrete glue logic. In the broader semiconductor hierarchy, the XC9572 is a complex programmable logic device within the FPGA and CPLD category, and its in-system programming capability supports configuration without removing the package from a circuit board. Important features include 72 macrocells, approximately 1,600 usable gates, 34 I/O pins, and a nominal 5 ns pin-to-pin logic-delay class for the broader family. The XC9572-10PC44C speed designation identifies a 10 ns-class device. Its FastFLASH configuration memory is specified for at least 10,000 program-and-erase cycles, while in-system programmability enables manufacturing, test, and field-update workflows that would be impractical with conventional fuse-programmed PLDs. The device is divided into four function blocks, each containing 18 macrocells. This partitioning gives the designer a view of the logic architecture while retaining a unified package and pin assignment. The 5 V technology supports systems that already operate at 5 V, reducing the need for level conversion between legacy peripheral logic and the CPLD. The 44-pin PLCC package is also associated with lead-containing legacy construction, so new RoHS-restricted designs should verify compliance and sourcing requirements before production release. Typical applications include legacy industrial control, test-and-measurement equipment, printer and peripheral controllers, board-level glue logic, embedded system interfaces, and general-purpose in-system programmable control logic. Its 34 I/O pins make it useful for designs requiring moderate I/O density rather than very high logic capacity, and its 10 ns timing class can address control, decoding, state-machine, and interface functions that do not require modern FPGA speeds. The principal design considerations are 5 V signal compatibility, pin assignment stability, programming-tool compatibility, and legacy-package availability. Confirm the pinout and programming interface in the DS065 datasheet before schematic capture, and validate every external pull-up, pull-down, and termination resistor against the board-level interface requirements. For new production programs, verify the exact suffix, temperature grade, sourcing plan, and applicable environmental compliance. This page combines the XC9572 architecture, pin and programming guidance, lifecycle-related sourcing considerations, and a qualified drop-in assessment. Because the XC9500 family is a legacy 5 V platform and the verified cross-reference information identifies no exact cross-vendor replacement, engineers should treat device reuse and supply planning as separate decisions rather than assume that an equivalent PLCC CPLD is electrically interchangeable.

RFQ צור קשר
XC9572-10PC44I - 72-Macrocell 5V CPLD | AMD
XC9572-10PC44I

XC9572-10PC44I - 72-Macrocell 5V CPLD | AMD

The AMD XC9572-10PC44I is a 72-macrocell in-system-programmable CPLD built with 0.5 µm Advanced CMOS 5V Fast FLASH technology, providing 1,600 usable gates, 34 user I/O, and a 44-pin PLCC package. Its 10 ns speed grade delivers a 7.5 ns pin-to-pin logic delay and a maximum system clock frequency of 66.7 MHz. The industrial-temperature option operates from -40°C to 85°C. A complex programmable logic device, or CPLD, combines a user-programmable architecture with nonvolatile configuration memory for deterministic logic implementation. The XC9500 family belongs to the broader FPGA and CPLD hierarchy, while the XC9572 device provides 72 macrocells arranged in eight 36V18 function blocks. This architecture is useful when control logic requires repeatable routing, in-system reconfiguration, and fast implementation without using a mask-programmed ASIC. Key features include 34 user I/O, 72 macrocells, 1,600 usable gates, and 10,000-cycle minimum in-system programming endurance. The device accepts a 4.5 V to 5.5 V supply range and supports a nominal 5 V operating point. Parallel programming allows multiple XC9500 devices to be programmed together, helping shorten production programming cycles for multi-device boards. The device is based on Advanced CMOS 5V Fast FLASH technology and divides its logic into eight 36V18 function blocks. A stated 7.5 ns pin-to-pin delay makes it appropriate for control, address decoding, interface translation, and fixed-format logic where the design does not require the routing flexibility or performance of a modern FPGA. The 44-pin PLCC package also supports through-hole board assembly and socket-based prototype interchange. Typical uses include industrial control interfaces, legacy peripheral emulation, test-fixture sequencing, programmable interface logic, and board-level glue logic. The 34 I/O count is suitable for moderate control and communication interfaces, while 72 macrocells support Boolean equations, state machines, counters, address decoding, and protocol front ends. Its 5 V supply and industrial temperature range distinguish it from lower-voltage or commercial-temperature programmable-logic families. Designers should assign I/O voltage and drive requirements before laying out the board, follow the DS065 pin-description table for every PLCC connection, and verify that the connected bus timing fits the 10 ns speed grade. The in-system programming pins, power rails, decoupling, and test requirements must be implemented exactly as described in the manufacturer data sheet; poor programming-signal routing can prevent reliable configuration. This product summary consolidates the XC9572-10PC44I electrical characteristics, package information, programming capabilities, selection trade-offs, and practical replacement guidance into an engineering-focused reference for maintaining or redesigning 5 V CPLD-based systems.

RFQ צור קשר
XC9572-10PC84C - 72-Macrocell 5ns In-System CPLD | AMD Xilinx
XC9572-10PC84C

XC9572-10PC84C - 72-Macrocell 5ns In-System CPLD | AMD Xilinx

The AMD Xilinx XC9572-10PC84C is an in-system programmable complex programmable logic device with 72 macrocells, 69 I/O, and 1,600 usable gates. The -10 speed grade provides 5 ns pin-to-pin logic delays, while the device uses advanced 0.5 µm CMOS 5 V FastFLASH technology in an 84-pin plastic leaded chip carrier package. It operates from a 4.75 V to 5.25 V supply for commercial-temperature applications. A complex programmable logic device, or CPLD, is a programmable logic semiconductor that combines macrocell-based logic, programmable interconnect, and user I/O in one package. XC9500-family CPLDs occupy the hierarchy between simple programmable logic devices and larger FPGAs. Their nonvolatile FastFLASH configuration retains the implemented logic after power is removed, while in-system programming allows a programmed design to be updated through dedicated programming pins. Key features include 72 macrocells, 1,600 usable gates, 69 I/O, and a minimum of 10,000 program or erase cycles. Four 36V18 function blocks implement the device architecture, and parallel programming permits multiple XC9500 devices to be programmed simultaneously. The 5 ns pin-to-pin delay is the principal timing figure associated with the -10 speed grade, whereas 7.5 ns is also listed for the family’s product specification. The XC9572 architecture is suitable for general-purpose logic integration where deterministic combinational and registered functions must be implemented without an external configuration memory. Its nonvolatile programmable structure simplifies deployment in control logic, interface conditioning, protocol conversion, legacy bus arbitration, and board-level glue logic. The 69 available I/O support connections among external digital devices and internal macrocell logic. Typical applications include industrial controller interfaces, printer and peripheral control, legacy bus adapters, embedded test logic, programmable logic interfaces, and compact system-support functions. Parallel programming is particularly useful when several XC9500 devices occupy one board and must receive configuration data efficiently during manufacturing or field updates. Designers should use the AMD DS065 datasheet when assigning pins and checking the 84-pin PLCC footprint. The device requires a 4.75 V to 5.25 V core supply, and its nonvolatile FastFLASH programming architecture should be considered when designing the programming interface. PCB layouts must preserve access to all configuration pins and provide adequate clearance around the J-bend package terminals. This page consolidates the XC9572 architecture, package and environmental characteristics, programming facts, and verified comparison references into an engineering-focused guide. It also distinguishes the directly usable XC9572-10PCG84C comparison from functional CPLDs that do not share a verified pin-compatible footprint, helping engineers avoid unnecessary PCB redesign work.

RFQ צור קשר
XC9572-10PC84I - 72-Macrocell 10ns 5V CPLD | Xilinx
XC9572-10PC84I

XC9572-10PC84I - 72-Macrocell 10ns 5V CPLD | Xilinx

The Xilinx XC9572-10PC84I is an in-system programmable complex programmable logic device with 72 macrocells, 1,600 usable gates, 69 user I/O pins, and a 10 ns propagation-delay grade in an 84-pin PLCC package. It operates from a 4.5 V to 5.5 V supply and supports a 7.5 ns pin-to-pin delay with fCNT up to 125 MHz. A CPLD is a programmable-logic device that converts Boolean equations and state-machine descriptions into a configurable digital circuit. Positioned within the FPGA and CPLD category, it provides deterministic combinational and registered logic through a nonvolatile Flash architecture. Unlike a mask-programmed custom ASIC, a CPLD allows logic changes to be programmed or reprogrammed after manufacture, shortening product-development and field-update cycles. The XC9572 provides 72 macrocells, approximately 1,600 usable gates, and up to 72 user I/O positions according to the family-level product specification. Its 5 V in-system programming interface supports a minimum of 10,000 program-and-erase cycles. Parallel programming of multiple XC9500 devices is also supported, making the device suitable for replicated or coordinated logic sections within larger 5 V systems. The -10 speed grade corresponds to a nominal 10 ns propagation-delay class, while the family is specified for a 7.5 ns pin-to-pin delay on all pins and fCNT operation to 125 MHz. The device uses Advanced CMOS 5V Fast FLASH technology and provides a deterministic architecture suited to control logic, interface decoding, bus arbitration, state machines, and legacy peripheral emulation. Typical applications include industrial control, test and measurement equipment, printer and display controllers, embedded system glue logic, and peripheral compatibility designs. Its 69 I/O pins provide substantial connectivity for parallel buses and multi-bit interfaces, while 5 V operation supports systems that already use 5 V CMOS logic. When designing around this legacy CPLD, verify all 84 package positions against the DS065 pin-description tables and confirm that 5 V signal levels do not exceed the device limits. A replacement program should also verify timing, ISP behavior, pin assignment, and industrial temperature requirements rather than relying only on package dimensions. This product page combines the device specifications, package constraints, practical logic-design guidance, and same-family replacement options to support legacy CPLD design reviews, maintenance programs, and controlled board-level modernization.

RFQ צור קשר
XC9572-15PC44C - 72-Macrocell 5V CPLD | AMD PLCC
XC9572-15PC44C

XC9572-15PC44C - 72-Macrocell 5V CPLD | AMD PLCC

The AMD XC9572-15PC44C is a 72-macrocell in-system programmable complex programmable logic device with 34 user I/O pins, approximately 1,600 gates, and a 15 ns speed grade in a 44-pin PLCC package. It operates from a 4.75 V to 5.25 V internal supply and is based on Advanced CMOS 5 V FastFLASH technology. A CPLD is a programmable-logic semiconductor that combines a structured array of logic macrocells with a nonvolatile configuration memory. In the hierarchy of programmable devices, a CPLD sits between simple programmable logic arrays and more complex FPGAs: unlike mask-programmed logic, it can be configured after manufacture, while unlike most FPGAs it typically provides predictable routing and timing across its macrocell architecture. This makes the XC9500 family useful for consolidating fixed control, interface, and glue logic into one package. The XC9572 provides four logic-element blocks, 72 macrocells, and 34 user I/O pins. Its -15 designation corresponds to a 15 ns maximum propagation-delay class, while the product data also identifies the family as supporting parallel programming of multiple XC9500 devices. In-system programmability permits configuration through the same board connectors used by the finished system, reducing assembly work compared with separately programmed nonvolatile memory. Advanced CMOS 5 V FastFLASH technology stores the configuration nonvolatily and supports at least 10,000 program/erase cycles according to the retrieved specifications. The 5 V supply requirement and 44-pin J-lead PLCC construction distinguish this device from modern low-voltage, fine-pitch FPGA packages. That package is intended for legacy and maintenance-oriented industrial hardware rather than new compact portable products. Typical uses include industrial control logic, legacy interface adapters, programmable test fixtures, and board-level control systems where 34 I/O pins and deterministic logic blocks are more useful than a large general-purpose FPGA. Existing XC9500 designs can also retain the same configuration ecosystem while reducing the number of separate logic devices. The primary design consideration is package and supply continuity. The 44-pin PLCC footprint is not a modern board-standard land pattern, and the XC9500 family is legacy technology that is not recommended for new hardware designs. Engineers should preserve the existing footprint, verify timing at the required voltage and temperature, and plan configuration-cable, programming-software, and obsolescence continuity before committing to production quantities. This page consolidates the verified device specifications, manufacturer datasheet identity, distributor availability links, legacy-family context, and qualified drop-in comparison points so engineers can distinguish genuine replacements from parts that merely share the broad CPLD category.

RFQ צור קשר
XC9572-15PC44I - 72-Macrocell 15 ns CPLD | Xilinx
XC9572-15PC44I

XC9572-15PC44I - 72-Macrocell 15 ns CPLD | Xilinx

Xilinx Inc. XC9572-15PC44I is an Advanced CMOS 5 V Fast FLASH in-system programmable CPLD with 72 macrocells, 34 I/O lines, and a 15 ns speed grade in a 44-LCC J-lead package. The device supports parallel programming of multiple XC9500 devices and is specified for industrial-temperature operation. According to the manufacturer data sheet, the XC9500 family provides 5 ns pin-to-pin logic delays and counting frequencies up to 125 MHz across its available density and speed grades. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines programmable logic structures with configuration memory. Within the programmable-logic hierarchy, a CPLD sits between simple programmable logic arrays and higher-capacity FPGAs. The XC9500 family uses Fast FLASH architecture to retain configuration data and support in-system programming, allowing logic designs to be loaded or updated without removing the device from a circuit. The XC9572-15PC44I provides 72 macrocells and 34 I/O lines, making it suitable for consolidating control logic, interface adaptation, state machines, and fixed protocol functions. Its 15 ns speed designation identifies the timing grade, while the family-level 5 ns pin-to-pin delay provides a basis for high-speed signal-path implementation. Fast FLASH technology and parallel programming support also simplify multi-device configuration or manufacturing workflows. The XC9500 architecture is organized around macrocells connected through a programmable switch matrix. Each I/O can be assigned appropriate logic or I/O functions, allowing a single device to replace multiple conventional logic devices. Because configuration is nonvolatile, the programmed behavior remains available after power is removed without requiring configuration SRAM to be refreshed by an external controller. Typical applications include industrial control logic, instrumentation, communications interface logic, test equipment, embedded systems, and legacy peripheral expansion. The industrial temperature grade is appropriate for controlled industrial equipment, while the 44-LCC package offers a through-hole-compatible option for systems assembled with leaded components rather than fine-pitch surface-mount packages. When replacing this CPLD, verify the package pinout, macrocell density, I/O voltage, temperature grade, and timing grade before substitution. Faster speed-grade variants may provide timing margin, but they can change power characteristics and should not be assumed equivalent without design-level timing review. This page consolidates verified manufacturer specifications, distributor availability, same-family drop-in candidates, pricing status, pinout availability, and practical replacement guidance. It separates confirmed XC9572-15PC44I data from family-level limits and identifies missing commercial and mechanical details rather than estimating them.

RFQ צור קשר
XC9572-15PC84I - 72-Macrocell 15 ns CPLD | AMD Xilinx
XC9572-15PC84I

XC9572-15PC84I - 72-Macrocell 15 ns CPLD | AMD Xilinx

AMD Xilinx XC9572-15PC84I is a 72-macrocell in-system programmable complex programmable logic device (CPLD) in an 84-pin PLCC package. It operates from a 5 V supply, offers a 15 ns speed grade, and provides 1,600 usable gates for general-purpose logic integration. The industrial-temperature option is specified for an ambient range of -40°C to +85°C. A CPLD is a programmable-logic semiconductor that combines programmable AND/OR-style logic structures with configuration memory and I/O resources. The XC9572 belongs to the XC9500 5 V CPLD family, positioned between fixed logic and larger FPGAs. Its role in an electronics hierarchy is programmable logic device → CPLD → semiconductor, while its applications commonly include legacy control, interface, decoding, and glue-logic functions. Key features include Advanced CMOS 5 V Fast FLASH technology, in-system programming, parallel programming of multiple XC9500 devices, and fast pin-to-pin logic delays. According to the XC9500 family material, the family supports pin-to-pin delays as low as 5 ns and fCNT operation up to 125 MHz. These figures describe family capabilities; the XC9572-15PC84I carries the slower 15 ns grade designation. The XC9572 architecture contains 72 macrocells and 1,600 usable gates. Its FLASH-based configuration memory retains the programmed logic after power is removed, allowing field configuration through the in-system programming interface. Compared with mask-programmed logic, this makes the device suitable for prototypes, production runs with small volume changes, and board-level control logic that must be revised without changing the PCB artwork. Typical applications include industrial controller glue logic, peripheral interfacing, legacy bus decoding, data acquisition systems, embedded control, and general-purpose logic consolidation. The 84-pin PLCC package also supports socketed prototyping and repair workflows, while the industrial temperature grade supports equipment operating across the stated -40°C to +85°C ambient range. Designers should verify signal timing against the 15 ns grade, preserve required power and ground connections, and follow the DS065 programming and test guidance. Because this legacy device has been discontinued by the manufacturer, long-lived production programs should include lifecycle risk review, controlled inventory planning, and an approved redesign path. This page combines the manufacturer DS065 specification details, package and lifecycle information, verified alternatives, and practical design guidance. It is intended to help engineers determine compatibility, understand timing constraints, and plan a sensible replacement or redesign strategy for this discontinued programmable-logic device.

RFQ צור קשר
XC9572-15PCG84C - 72-Macrocell 15 ns CPLD | AMD | PLCC-84
XC9572-15PCG84C

XC9572-15PCG84C - 72-Macrocell 15 ns CPLD | AMD | PLCC-84

The AMD XC9572-15PCG84C is a 72-macrocell, in-system-programmable CPLD with 1,600 usable logic gates, 69 I/O lines, and a 15 ns speed grade in an 84-lead PLCC package. It is designed for general-purpose logic integration where deterministic timing, field programmability, and a 5.25 V maximum supply voltage are important. The device belongs to the XC9500 CPLD family and uses FastFLASH technology for in-system programming and test. A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor positioned between simple fixed-function gates and larger FPGAs. Its internal architecture uses interconnected macrocells and a programmable interconnect to implement Boolean equations, state machines, interface logic, counters, and control functions. Within the broader programmable-logic hierarchy, the XC9572 sits as a compact CPLD: simpler to configure than an FPGA while providing flexible, nonvolatile in-system programmability for general-purpose logic consolidation. The XC9572 contains four 36V18 function blocks and 72 macrocells, providing 1,600 usable gates for moderate-density control logic. Its 69 user I/O pins support connection to external memories, interfaces, counters, and control peripherals. The 15 ns speed grade makes it useful when the design requires faster switching than slower legacy CPLD grades. The part also supports in-system programming and test, allowing configuration or functional updates without removing the device from its assembled circuit. The device is manufactured in advanced CMOS and operates from a nominal 5 V supply with a maximum supply voltage of 5.25 V. The commercial-temperature XC9572-15PCG84C is specified for 0 °C to 70 °C. Its 84-lead J-bend PLCC package has a stated size of 29.3116 mm by 29.3116 mm by 5.08 mm. The architecture is based on the XC9500 family’s FastFLASH technology and supports parallel programming of multiple XC9500 devices when system-level configuration requirements demand it. Typical applications include industrial control and sequencing, legacy peripheral interfacing, data-acquisition logic, display-control functions, embedded bus arbitration, and board-level glue logic. The 69 available I/O lines make it especially useful when consolidating several asynchronous control functions into one programmable device. It can also serve as a companion logic device beside processors, microcontrollers, FPGAs, or memory devices when a small amount of deterministic support logic is required. Designers should preserve the PLCC footprint when considering a replacement and verify pin assignments, voltage limits, and temperature grade before substitution. The package has 84 terminals, but the exact terminal names are not reproduced here; use the XC9572 In-system Programmable CPLD Data Sheet, DS065, when assigning PCB tracks and programming pins. Commercial availability should be confirmed through the Request a Quote form because this is a legacy programmable-logic device.

RFQ צור קשר
XC9572-7PC44C - 72-Macrocell 5V CPLD | AMD | PLCC-44
XC9572-7PC44C

XC9572-7PC44C - 72-Macrocell 5V CPLD | AMD | PLCC-44

AMD XC9572-7PC44C is a high-performance 5 V CPLD providing 72 macrocells, approximately 1.6K logic gates, and an 83.3 MHz maximum device frequency in a 44-lead PLCC package. The device uses 0.5 µm Advanced CMOS technology and supports 5 ns pin-to-pin logic delays, making it suitable for general-purpose logic integration, industrial automation, telecommunications infrastructure, and consumer electronics. A CPLD, or Complex Programmable Logic Device, is a user-programmable digital semiconductor that combines a programmable logic array with nonvolatile configuration memory. Its position in the broader hierarchy is programmable logic → programmable logic device → CPLD → configurable logic array. Unlike a mask-programmed logic device, a CPLD can be configured after manufacture, allowing the same board design to accommodate revised logic, production testing, and field updates. The XC9572-7PC44C provides 72 macrocells, approximately 1.6K gates, and a 5 ns speed grade. It uses FastFLASH configuration technology, supports in-system programming, and allows parallel programming of multiple XC9500 devices. The documented operating supply range is 4.75 V to 5.25 V, making the part appropriate for legacy 5 V logic systems rather than low-voltage designs operating directly from 3.3 V. The device combines 72 dedicated macrocells with a programmable interconnect. Each macrocell can implement registered or combinational logic, while the interconnect routes signals between macrocells and package pins. A 5 ns pin-to-pin delay supports designs requiring predictable combinational timing, while the -7 speed grade corresponds to the reported 83.3 MHz maximum frequency. These figures are device-level characteristics; actual system timing must also account for external setup time, clock skew, interconnect delays, and output loading. Typical uses include industrial control logic, telecommunications interface logic, test equipment, embedded control support, and consumer products. The 44-lead PLCC package supports surface mounting and can be useful where a socketed prototype or field replacement is desired. Its nonvolatile configuration storage allows the programmed logic to remain available after power removal without continuously rewriting the device. Designers should verify every unused PLCC pin, programming-interface connection, supply decoupling, and I/O voltage relationship against the manufacturer datasheet. The specified internal supply range is only 4.75 V to 5.25 V. External I/O voltage must not exceed VCCINT by more than the documented 4.0 V limit, and transient overshoot and undershoot must remain within the stated absolute-maximum conditions. This page combines verified device specifications, distributor and manufacturer source links, same-family replacement analysis, parameter comparisons, and practical CPLD design guidance. The alternatives are restricted to same-package, pin-compatible candidates; unavailable pricing, pin-level details, and certification fields are explicitly identified rather than inferred from unrelated records.

RFQ צור קשר
XC9572-7PC84C - 72-Macrocell 5V CPLD | AMD | PLCC-84
XC9572-7PC84C

XC9572-7PC84C - 72-Macrocell 5V CPLD | AMD | PLCC-84

The AMD XC9572-7PC84C is a 72-macrocell, 5 V in-system-programmable complex programmable logic device with 7.5 ns pin-to-pin logic delay, a maximum fCNT of 125 MHz, and an 84-lead PLCC package. The device provides 1,600 usable gates and up to 72 user I/O pins, while one distributor specification identifies 69 I/O pins for this exact orderable MPN. A CPLD is a programmable logic device that sits between fixed-function logic and an FPGA in the broader semiconductor hierarchy. Its nonvolatile architecture retains a programmed logic configuration after power removal, while its macrocell structure and in-system programming interface support practical field configuration, testing, and design migration. The XC9572 belongs to the XC9500 5 V CPLD family and uses Advanced CMOS 5V Fast FLASH technology. Key features include 72 macrocells, 1,600 usable gates, 7.5 ns pin-to-pin delay, operation to 125 MHz, 5 V in-system programming, and a stated programming endurance of at least 10,000 program or erase cycles. The family also supports parallel programming of multiple XC9500 devices. These characteristics make the XC9572 appropriate for consolidating medium-complexity control logic, interface decoding, state machines, and legacy glue logic. The XC9572-7PC84C is identified as a commercial-grade 84-terminal J-bend device in an 84-lead LCC package. The -7 speed designation corresponds to the verified 7.5 ns pin-to-pin delay, while the C suffix denotes the commercial ordering variant. Because this is a 5 V architecture, system designers must verify every attached signal against the device's input thresholds and supply requirements rather than treating it as a modern 3.3 V or 1.8 V CPLD. Typical applications include industrial control systems, legacy peripheral interfaces, programmable logic replacement, instrumentation, and compact control boards requiring nonvolatile logic with in-system reconfiguration. It is especially relevant where a small amount of moderate logic must be consolidated without moving the design to a larger FPGA. Its 84-lead PLCC footprint also supports migration among compatible XC9500 devices when macrocell count, timing, and pin assignment remain acceptable. The principal design consideration is compatibility with the original XC9500 implementation. Engineers should preserve the target's power architecture, verify every pin against the XC9572 package data, and confirm that the design meets the 7.5 ns timing requirement. The XC9572 is identified as RoHS non-compliant and contains lead, so new regulated production designs should require an explicit lifecycle and environmental review before procurement. This page consolidates verified manufacturer and distributor information, drop-in same-family options, parameter comparisons, and practical migration guidance. The alternatives and application passages are intentionally limited to package-compatible XC9500-family choices supported by the supplied evidence, avoiding unrelated FPGA replacements that would require redesign.

RFQ צור קשר