מוצרים (42,000+)

XCKU035-1FBVA676C Kintex UltraScale FPGA 444K Cells | AMD
XCKU035-1FBVA676C

XCKU035-1FBVA676C Kintex UltraScale FPGA 444K Cells | AMD

The AMD Xilinx XCKU035-1FBVA676C is a Kintex UltraScale Field Programmable Gate Array built on TSMC's 20nm process, integrating 444,343 logic cells and 19,456,000 system gates in a 676-ball FCBGA package (27 mm × 27 mm) with 312 user I/Os. It runs a -1 speed grade targeting up to 630 MHz fabric performance, with 12.5 Gb/s capable transceivers (GTH) on select Kintex UltraScale SKUs and 240 DSP48E2 slices optimized for high-throughput fixed- and floating-point arithmetic. The commercial temperature grade (suffix C) supports 0 °C to +85 °C operation with a 0.95 V core voltage. What is an FPGA? A Field Programmable Gate Array (FPGA) is a programmable logic device that lets designers implement custom digital circuits after PCB fabrication by configuring an array of configurable logic blocks (CLBs), dedicated DSP slices, block RAM, and high-speed serial transceivers. Within the broader semiconductor hierarchy, an FPGA sits between general-purpose CPUs/GPUs (fixed instruction set, software-defined) and ASICs (fixed hardware). AMD's Kintex UltraScale family occupies the mid-range position in the UltraScale portfolio, sitting below Virtex UltraScale (highest logic density and bandwidth) and above Artix UltraScale (lowest cost and power). All Xilinx boards shift the value curve toward best-in-class price/performance/watt at 20nm. Key features of the XCKU035-1FBVA676C include up to 1,250 Mbps of DDR4 external memory interface support, integrated PCIe Gen3 hard cores, 4.7 Mb of distributed RAM, 240 DSP slices, and 16 GT transceivers on -1 speed grade parts in the larger Kintex UltraScale family. The device provides 312 high-performance SelectIO pins supporting multiple I/O standards including LVDS, HSTL, SSTL, and differential memory interfaces. The device also exposes 3 MMCM and 8 PLL mixed-mode clock managers for high-frequency clock synthesis and skew management. Architecturally, the Kintex UltraScale device uses UltraScale architecture enhancements over 7-series FPGAs - including new routing interconnect, more efficient clock networks, and improved block RAM and DSP resources. The 20nm planar CMOS process allows higher integration while keeping leakage power low, and the GT(GTH) transceivers support 12.5 Gb/s line rates for backplane and chip-to-chip serial interconnect. The XCKU035-1FBVA676C serves wireless baseband processing, software defined radio, high-definition video processing pipelines, high-speed serial backplane bridging, and PCIe accelerator card designs in the 100K–500K logic-cell density class. When laying out a board with this BGA, allocate 12 power rails (VCCINT, VCCAUX, VCCO, MGTAVCC, MGTAVTT, VBATT, MGTVCCAUX, VCCADC, VCCBRAM, VCCO_HP, VCCAUX_IO, plus GT helper rails) and follow the package-specific K7-PCB decaps guidance in UG583 to control simultaneous switching noise and SSN.

USD $467.66 במלאי
XCKU035-1FBVA900C - Kintex UltraScale FPGA | AMD
XCKU035-1FBVA900C

XCKU035-1FBVA900C - Kintex UltraScale FPGA | AMD

The AMD XCKU035-1FBVA900C is a Kintex UltraScale field-programmable gate array with 355,474 logic cells, 468 I/Os, and a 900-ball flip-chip BGA package. It operates from a nominal 0.95 V core supply, with a stated core-voltage range of 0.922 V to 0.979 V, and is built on a 20 nm process. The device is packaged as a 900-BBGA, FCBGA and targets industrial communications, high-speed processing, embedded vision, and infrastructure equipment requiring substantial parallel programmable logic. An FPGA is a reconfigurable semiconductor in the broader category of programmable logic devices. Unlike a fixed-function ASIC, an FPGA combines configurable logic blocks, programmable I/O, memory resources, clocking, and dedicated signal-processing or serial-transceiver blocks. The Kintex UltraScale family sits above AMD’s lower-density FPGA families in logic capacity and I/O resources, making it suitable for systems that must consolidate multiple fixed functions onto one board while retaining design flexibility. The XCKU035-1FBVA900C provides 468 I/Os, a 900-terminal package, and 355,474 logic cells. Its 0.922 V to 0.979 V core-voltage range leaves relatively little margin around the nominal 0.95 V operating point, so power delivery must account for transient behavior and package-level supply requirements. The commercial-grade ordering code is associated with a 0 °C to 85 °C operating-temperature range. Detailed resource counts, pin functions, configuration requirements, and power characteristics should be confirmed against the AMD Kintex UltraScale data sheet and package pinout files before schematic release. Kintex UltraScale devices combine programmable logic with dedicated resources for high-speed serial connectivity, memory-intensive data processing, and clock management. That architecture allows designers to implement parallel datapaths, protocol bridges, network packet processing, embedded control, and accelerator functions in one device. The 900-ball package provides a large I/O and power-delivery interface, but its fine pitch and high ball count make clean PCB layout, plane construction, via planning, and assembly process control essential. Typical uses include high-throughput network equipment, industrial control and test systems, video-processing infrastructure, telecommunications equipment, and embedded accelerators. The large pin count also makes the device suitable for designs requiring numerous high-speed interfaces, substantial external memory connectivity, or multiple voltage domains. Software tools, bitstreams, board support, and the selected transceiver or memory interfaces must be validated for the exact device suffix before production deployment. The primary engineering constraint is power integrity at the 0.95 V core rail. Designers should follow the AMD recommended decoupling, package-ball, and PCB-layer guidance, provide stable power across temperature, and validate signal integrity on every high-speed interface. Configuration pins, clock inputs, resets, and dedicated transceiver pins must be assigned according to the official package pinout rather than inferred from another 900-ball device. This product record combines the exact ordering information, package identity, core electrical conditions, resource headline, and current sourcing links with engineering guidance for power, layout, thermal, and lifecycle decisions. It also distinguishes true same-footprint family alternatives from differently packaged Kintex options so engineers can assess replacement feasibility without confusing package compatibility with functional similarity.

RFQ צור קשר
XCKU035-1FBVA900I - Kintex UltraScale FPGA | AMD Xilinx
XCKU035-1FBVA900I

XCKU035-1FBVA900I - Kintex UltraScale FPGA | AMD Xilinx

The AMD Xilinx XCKU035-1FBVA900I is a Kintex UltraScale field-programmable gate array with 468 I/O sites, 444343 logic cells, and a 0.922 V to 0.979 V supply-voltage range, packaged in a 900-pin FCBGA. This industrial-temperature device combines programmable logic, block RAM, DSP resources, and high-speed serial transceivers in a single 20 nm FPGA package. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. The Kintex UltraScale family belongs to the broader hierarchy of FPGA and CPLD devices, programmable-logic semiconductors, and integrated circuits. Instead of implementing a fixed digital function in application-specific silicon, an FPGA combines configurable logic, routing, memory, hard processors, dedicated arithmetic blocks, and I/O resources to accelerate parallel processing, networking, signal processing, and control tasks. The XCKU035-1FBVA900I provides 468 I/O and 444343 logic cells in a compact 31 mm by 31 mm 900-pin FCBGA. Its nominal core supply range of 0.922 V to 0.979 V supports modern high-performance FPGA power architectures, while the extensive I/O count allows simultaneous external interfaces. The -1 ordering code identifies the device performance grade, FBVA900 identifies the package family and pin count, and the final I identifies the industrial temperature option. Exact clock, block-RAM, DSP, transceiver, and power specifications should be taken from the appropriate AMD product-table and datasheet sections. The large logic-cell count permits multiple parallel datapaths to be implemented in one device, reducing the need for discrete glue logic and supporting designs with multiple interfaces. Dedicated serial transceivers are central to the Kintex UltraScale architecture and support high-speed serial links when their operating conditions and pin constraints are satisfied. Because the FPGA uses thousands of configurable elements and a large ball-grid-array package, its power, decoupling, thermal, and routing implementation must be designed with the relevant reference design rather than treated like a small digital IC. Typical applications include high-throughput networking equipment, industrial control and automation, test-and-measurement systems, embedded vision, aerospace and defense platforms, and high-bandwidth signal-processing equipment. The 468 available I/O sites are especially useful when a design must connect multiple buses, memory devices, clocks, transceivers, and control signals. A smaller FPGA may be sufficient for modest control logic, while a larger device or multiple FPGAs may be required when a design exceeds the available logic, memory, DSP, or transceiver resources. Power delivery is a primary layout consideration for this 900-pin FCBGA. Place the required power and ground connections directly beneath or as close as practical to their assigned balls, follow the AMD package and board-design guidance, and preserve the specified return-path geometry. A complete pin assignment must be checked against the UltraScale package pinout file before assigning any FPGA bank, differential pair, clock, or transceiver signal. This page combines exact orderable-part identification, package and interface facts, qualified same-family drop-in choices, and design guidance for evaluating the XCKU035-1FBVA900I in industrial FPGA systems.

RFQ צור קשר
XCKU035-1SFVA784I - 784-BFBGA Kintex UltraScale FPGA | AMD
XCKU035-1SFVA784I

XCKU035-1SFVA784I - 784-BFBGA Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU035-1SFVA784I is a Kintex UltraScale field-programmable gate array with 444343 programmable logic cells, 468 user I/O, and a 784-ball flip-chip BGA package. It is manufactured on a 20 nm process and uses a 0.95 V core supply. The -1 suffix identifies the standard -1 speed grade, while the SFVA784 designation identifies the 784-ball FCCSP package and the I suffix identifies the industrial-temperature option. A field-programmable gate array is a programmable-logic device in which configurable logic blocks, programmable I/O, embedded memory, DSP resources, and dedicated clocking resources are combined on one integrated circuit. FPGA technology sits between fixed-function ASICs and software-programmable processors. Unlike an ASIC, an FPGA allows logic, interfaces, and parallel processing pipelines to be modified after manufacture, while an FPGA delivers deterministic hardware-level performance without the sequential instruction overhead of a software CPU. Key device characteristics include 444343 logic cells, 468 user I/O, a 784-BFBGA package, 20 nm process technology, and a 0.95 V core operating voltage. These resources suit designs requiring extensive parallel processing, high pin count, programmable serial links, high-speed memory interfaces, and multi-gigabit data movement. The large ball count supports dense board escape routing and direct access to power, ground, configuration, clock, and user I/O resources. The Kintex UltraScale architecture combines programmable logic with dedicated hardware for DSP, memory, and serial connectivity. Its -1 speed grade is intended for standard industrial performance rather than the faster -2 or -3 grades. Because the XCKU035-1SFVA784I uses the same 784-ball package family as closely related Kintex UltraScale devices, board-level migration can be evaluated through AMD package and pinout resources rather than redesigning the footprint from scratch. Typical applications include industrial imaging, machine vision, video processing, network infrastructure, high-speed data acquisition, software-defined radio, test and measurement, and embedded accelerator cards. In these systems, parallel lanes and DSP blocks can process pixels, samples, or protocol packets concurrently, while programmable I/O adapts the board to external converters, transceivers, and memory components. Design work should begin with the AMD package pinout files and the device-specific pin description in the manufacturer documentation. Validate every power rail, decoupling strategy, configuration interface, clock source, and high-speed I/O constraint against the relevant hardware design guide. Confirm that the selected memory transceivers, board connectors, and auxiliary power regulators support the electrical requirements of the selected speed grade. This page combines device identification, package details, practical design guidance, and engineering-focused application analysis to support faster FPGA sourcing, prototyping, and board-design decisions.

RFQ צור קשר
XCKU035-2FBVA676E - 676-pin Kintex UltraScale FPGA | AMD
XCKU035-2FBVA676E

XCKU035-2FBVA676E - 676-pin Kintex UltraScale FPGA | AMD

The AMD (formerly Xilinx) XCKU035-2FBVA676E is a Kintex UltraScale field-programmable gate array (FPGA) IC delivering 355,474 logic cells (194,560 6-input LUTs), 19.45M total on-chip memory bits, and 312 user I/Os, fabricated in a 20 nm CMOS process and housed in a 676-ball flip-chip BGA (FCBGA-676) package. It is a logic-density mid-range device in the Kintex UltraScale family and is targeted at high-throughput DSP, 100G packet processing, and ASIC-prototyping workloads. The "-2" suffix denotes the -2 speed grade (the second-fastest bin in the family), and the "E" suffix denotes the extended (industrial) temperature screening of -40 C to +100 C. A Kintex UltraScale FPGA belongs to the broader UltraScale architecture family, which is positioned between cost-optimized Artix/Spartan devices and the highest-density Virtex UltraScale devices in the AMD product hierarchy. FPGAs (Field-Programmable Gate Arrays) are programmable logic devices containing large arrays of configurable logic blocks (CLBs), block RAM (BRAM), DSP slices, high-speed transceiver tiles (GTX/GTH), and clock-management tiles (CMTs/PLLs/MMCMs). The Kintex UltraScale tier targets price/performance-sensitive applications such as 100G optical line cards, software-defined radio, and high-end DSP prototyping. Key headline specifications include 1,700 Configurable Logic Blocks (CLBs) and 444,343 logic cells in some datasheet groupings (the modern nominal figure is 355,474), up to 19.45 Mbits of distributed + block RAM, 312 user I/Os in the FBVA676 package, and 16.3G transceivers (per UltraScale family documentation). The device integrates 20 CMT clock tiles and 240 DSP slices, providing substantial arithmetic throughput and flexible clocking. Architecturally, the Kintex UltraScale uses the UltraScale routing fabric with stacked 3D silicon interposer-style back-bias routing, supporting up to 16.3 Gb/s transceivers for chip-to-chip and backplane SERDES. The 20 nm node and monolithic die deliver higher performance-per-watt than prior 28 nm 7-series Kintex devices while maintaining PCIe Gen3 hard-IP blocks. Typical applications for the XCKU035-2FBVA676E include 100G Ethernet bridge/router line cards, software-defined radio baseband cards, ASIC prototyping with 100% RTL mapping, high-end video processing, and DSP front-end for radar/medical imaging. The wide logic/memory/transceiver budget makes it the typical "starting point" for ADC-DAC-coupled signal-processing cards. When designing with the XCKU035-2FBVA676E, ensure multi-rail decoupling per the AMD UltraScale PCB Design Guide (UG583) for power-rail sequencing. The industrial temperature screen (E) allows deployment in outdoor telecom and industrial-control applications beyond commercial grade. This page combines verified distributor pricing, drop-in alternative analysis across the Kintex UltraScale family, and practical design notes not consolidated on the AMD datasheet.

RFQ צור קשר
XCKU035-2FBVA676I - Kintex UltraScale FPGA, 444K Logic Cells | AMD
XCKU035-2FBVA676I

XCKU035-2FBVA676I - Kintex UltraScale FPGA, 444K Logic Cells | AMD

The AMD XCKU035-2FBVA676I is a Kintex UltraScale Field Programmable Gate Array (FPGA) with 444,343 logic cells and 19,456,000 bits of block RAM, housed in a 676-ball Flip-Chip BGA package. Built on a 20nm process node and offered at a -2 (mid) speed grade, this device targets mid-range high-performance applications requiring an optimal balance of price, performance, and power efficiency. A Field Programmable Gate Array (FPGA) is a reconfigurable integrated circuit whose logic fabric, interconnect, and I/O can be programmed post-manufacture to implement arbitrary digital functions. FPGAs belong to the broader category of programmable logic devices (PLDs), which sit hierarchically under digital semiconductors and ICs. The Kintex UltraScale family from AMD (formerly Xilinx) addresses the spectrum between cost-optimized Artix and high-end Virtex devices, focusing on DSP, memory bandwidth, and transceiver integration. Key features of the XCKU035 include 312 maximum user I/Os, integrated DSP slices for high-throughput signal processing, dedicated block RAM (BRAM) for on-chip data storage, and high-speed serial transceivers suitable for chip-to-chip and backplane links. The device supports multiple configuration modes including JTAG, SPI, and BPI, enabling flexible boot strategies in production systems. The Kintex UltraScale architecture leverages a 20nm planar process with stacked-silicon interconnect (SSI) options in larger family members. The XCKU035 uses monolithic silicon, providing predictable performance and lower cost. The UltraScale architecture introduces enhanced routing, multi-die clocking, and improved DSP and BRAM utilization rates over prior 7-Series FPGAs. Typical applications of the XCKU035-2FBVA676I include high-speed data acquisition systems, software-defined radio (SDR) baseband processing, video broadcast equipment, industrial machine vision, 100G network interface cards, and aerospace telemetry. Its combination of logic density, memory bandwidth, and transceivers makes it well-suited for prototyping ASICs or low-volume production. When designing with the FBVA676 BGA, plan for high-density PCB fabrication with microvia or via-in-pad stackups, controlled-impedance traces for transceivers, and robust power distribution with high-frequency decoupling to satisfy simultaneous switching noise (SSN) requirements. This page synthesizes distributor pricing, FPGA drop-in alternatives within the same 676-BGA footprint, and practical design notes not typically presented in the manufacturer datasheet.

RFQ צור קשר
XCKU035-2FBVA900E - Kintex UltraScale FPGA | AMD
XCKU035-2FBVA900E

XCKU035-2FBVA900E - Kintex UltraScale FPGA | AMD

The AMD XCKU035-2FBVA900E is a Kintex UltraScale field-programmable gate array built around 444,343 logic cells and 1,700 configurable logic blocks in a 900-BBGA FCBGA package. The -2 designation identifies its performance speed grade, while the E suffix identifies the extended-temperature product option. The device is designed for high-throughput digital systems that require substantial parallel processing, high-speed serial links, and deterministic programmable logic. A field-programmable gate array, or FPGA, is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device, an application-specific integrated circuit alternative, and a semiconductor. Kintex UltraScale devices combine programmable logic with dedicated resources such as high-speed transceivers, DSP blocks, block RAM, and integrated memory controllers. Key characteristics of this configuration include 444,343 logic cells, 1,700 configurable logic blocks, and 520 input/output resources. The 900-BBGA package provides a high pin count suitable for parallel interfaces and multiple high-speed transceiver connections. A nominal 0.95 V core voltage is identified for the -2 device, while the available supply rails and configuration requirements must be followed according to the AMD data sheet for the specific package and speed grade. The -2 speed grade positions the XCKU035 between the lower-power -1 options and the highest-performance -3 option in the Kintex UltraScale family. Designers must also account for the large device's power consumption, thermal output, and multilayer PCB requirements. High-pin-count BGA construction calls for controlled escape routing, via-in-pad or via-beneath-array structures where appropriate, and careful power-plane distribution to maintain signal and power integrity. Typical applications include network infrastructure, video and image processing, high-speed data acquisition, industrial control, scientific instrumentation, and defense or communications systems. The device is particularly useful when a design requires deterministic parallel pipelines, real-time processing, or multiple simultaneous data paths and cannot be implemented efficiently in a smaller FPGA. When planning a board, use the AMD UltraScale package pinout files and the Kintex UltraScale data sheet to assign every package ball, power rail, configuration signal, and transceiver connection. Validate the selected -2 speed grade against the timing constraints of the design rather than relying on a generic device maximum. This page consolidates package, logic-resource, and sourcing information for engineers evaluating the XCKU035-2FBVA900E, together with verified same-family references, engineering selection guidance, and application-oriented design context that is not limited to a catalog parameter list.

RFQ צור קשר
XCKU035-2FBVA900I - Kintex UltraScale FPGA | AMD
XCKU035-2FBVA900I

XCKU035-2FBVA900I - Kintex UltraScale FPGA | AMD

The AMD XCKU035-2FBVA900I is a Kintex UltraScale field-programmable gate array with 444,343 logic cells, 468 user I/Os, and a 900-ball flip-chip BGA package. It uses 20 nm FPGA technology, supports internal core voltages spanning 0.922 V to 0.95 V, and combines programmable logic, DSP, block RAM, high-speed connectivity, and next-generation transceivers in one device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. An FPGA sits in the broader hierarchy of programmable logic devices, semiconductor integrated circuits, and digital processing systems. Its fabric contains configurable lookup tables, routing resources, fixed-function DSP blocks, block RAM, clocking, and input/output resources, allowing one package to implement multiple control, interface, and signal-processing functions. Key features include a 444,343-cell Kintex UltraScale fabric, 19,456,000 bits of block RAM, and 468 user I/O positions. AMD describes the device as using monolithic and next-generation stacked-silicon interconnect technology to balance performance, capacity, and cost. High DSP and block-RAM-to-logic ratios suit parallel filtering, FFT, video, and protocol-processing workloads, while the transceiver resources support high-speed serial links. The -2 speed designation identifies the device’s performance grade, while the FBVA900I ordering code identifies the 900-ball package and industrial temperature option. The FBVA package is designed for demanding boards where fine-pitch BGA routing, multilayer interconnects, controlled power delivery, and careful thermal design are essential. Its large I/O count also makes board escape routing and simultaneous-switching-noise analysis important parts of implementation. Typical applications include 100G networking equipment, data-center acceleration, industrial video processing, medical imaging, test and measurement systems, and high-throughput digital signal processing. In these systems, the FPGA can implement multiple pipelines in parallel while using block RAM for packet buffering and DSP blocks for filtering, modulation, or transforms. The large pin count also supports wide parallel interfaces when high-speed serial bandwidth is not required. Designers should treat the BGA substrate as a complete signal-integrity and power-delivery system. Use the manufacturer’s package pinout files and PCB guidance to assign every ball, plan power and ground planes, preserve return paths beneath high-speed interfaces, and control simultaneous switching activity. Validate the complete voltage regulator, decoupling, and thermal design across worst-case activity and ambient conditions. This product summary combines ordering data, package characteristics, pin-compatible options, application guidance, and PCB implementation considerations. It is designed to help engineers evaluate the XCKU035-2FBVA900I for high-density programmable-logic and signal-processing systems while keeping the final design tied to AMD’s official device documentation.

RFQ צור קשר
XCKU035-2SFVA784E - 468 I/O Kintex UltraScale FPGA | AMD
XCKU035-2SFVA784E

XCKU035-2SFVA784E - 468 I/O Kintex UltraScale FPGA | AMD

The AMD XCKU035-2SFVA784E is a Kintex UltraScale FPGA in a 784-pin FCCSP BGA package, combining 468 user I/O with high-performance programmable logic and signal-processing resources. The device is built on 20 nm technology and is positioned for communications, industrial control, test equipment, signal processing, and high-speed embedded systems where substantial parallel connectivity is required. Its 784-pin package provides a large number of user I/O and power connections, making it suitable for designs requiring high-bandwidth interfaces, multiple external memory or sensor connections, and complex control logic. A Field Programmable Gate Array (FPGA) is a semiconductor device whose digital logic can be configured after manufacture. The FPGA hierarchy places the XCKU035-2SFVA784E in the programmable-logic and system-level integration category, where configurable logic blocks, DSP resources, block RAM, high-speed I/O, and dedicated clocking or power resources are combined into a single device. Compared with a fixed-function ASIC, an FPGA allows hardware behavior to be revised during development, prototyping, and field upgrades. Key device attributes include 468 user I/O, a 784-pin FCCSP BGA package, a 23 mm by 23 mm package format, a stated 20 nm process technology, and a 0.922 V to 0.979 V supply-voltage range. The package exposes substantially more connectivity than smaller FPGA packages, which supports wide parallel data paths and multiple board-level interfaces. The listed 44,343 and 25,391 figures in distributor catalog records correspond to additional catalog attributes, but their precise technical definitions require confirmation from the AMD device documentation before they are used in a design calculation. The XCKU035-2SFVA784E is intended for engineers building parallel processing systems, high-speed networking equipment, industrial automation, medical or scientific instrumentation, and embedded signal-processing platforms. Its 468 I/O count is particularly useful for systems that need multiple control buses, high-speed transceivers, parallel ADC or DAC interfaces, clock distribution, or external memory connections. The large BGA package also requires careful PCB layout, power-plane design, thermal analysis, and manufacturing inspection. Use the AMD package pinout files and the manufacturer datasheet when assigning power, ground, configuration, clock, and user-I/O pins. Do not infer BGA ball assignments from a generic package drawing, because the XCKU035 device-specific pinout determines legal connections. The E suffix identifies the commercial temperature-grade ordering option, while the I ordering code represents a different qualification class and should not be substituted without checking the full ordering guide. This product page combines catalog specifications, package information, sourced comparison references, and practical engineering guidance for engineers evaluating the XCKU035-2SFVA784E for high-density programmable-logic platforms.

RFQ צור קשר
XCKU035-2SFVA784I - 468 I/O Kintex UltraScale FPGA | AMD
XCKU035-2SFVA784I

XCKU035-2SFVA784I - 468 I/O Kintex UltraScale FPGA | AMD

AMD XCKU035-2SFVA784I is a Kintex UltraScale field-programmable gate array with 468 I/O channels, 444343 logic cells, and 19,456,000 bits of memory capacity, housed in a 784-BFBGA FCCSP package. The -2 designation identifies the performance grade, while the industrial-temperature suffix supports operation from -40°C to 100°C junction temperature. The device belongs to AMD's Kintex UltraScale family, built on a 20 nm process for high-performance programmable logic, signal processing, and high-speed connectivity. A field-programmable gate array is a semiconductor whose configurable logic, memory, and I/O resources can be programmed after manufacture. An FPGA sits above programmable logic within the broader digital semiconductor hierarchy, combining parallel or serial interfaces, digital signal processing, block RAM, and clocking resources in one device. This integration allows a board to implement multiple fixed-function ICs in a single reconfigurable silicon platform while shortening development cycles and supporting post-deployment updates. The XCKU035-2SFVA784I combines a large Kintex UltraScale logic resource with 468 user I/O in a high-pin-count BFBGA package. Its -2 speed grade provides a defined performance level for designs requiring substantial parallel processing or high-speed interface bandwidth. The package uses a fine-pitch ball-grid-array format intended primarily for multilayer PCB designs, where careful escape routing, via planning, and power-delivery design are essential. The 784-BFBGA package presents a demanding electrical and mechanical implementation challenge because hundreds of balls connect a large FPGA to a dense PCB. Designers must use a PCB stack-up and ball-out supported by the device documentation, provide clean power rails, preserve signal integrity on high-speed interfaces, and verify that the assembled board satisfies thermal and via-in-pad requirements. The industrial temperature rating makes the device suitable for equipment expected to operate across extended commercial and industrial environments, subject to correct thermal design. Typical uses include industrial control, test and measurement, networking, high-speed signal acquisition, video processing, and embedded communications systems. In these applications, the FPGA can implement parallel data paths, protocol conversion, real-time filtering, interface bridging, and control logic in one programmable device. Its combination of logic density, I/O availability, and 784-ball packaging supports systems where a smaller FPGA or several discrete logic devices would be less practical. Replacement planning must account for more than the device name. The speed grade, industrial-temperature suffix, package designation, and pinout all affect system timing, qualification, and PCB compatibility. A different package is not a drop-in replacement even when it uses the same Kintex UltraScale family, while a different speed or temperature grade can change design margins. Compare the exact ordering code and AMD documentation before approving a substitute. This product record combines the exact orderable MPN, package and resource details, verified cross-reference candidates, practical PCB considerations, and selection guidance. It supports engineers comparing FPGA capacity, package compatibility, industrial-temperature operation, and lifecycle needs before initiating a quote through the XAIPART Request a Quote form.

RFQ צור קשר
XCKU035-3FBVA676E - -3 Kintex UltraScale FPGA | AMD
XCKU035-3FBVA676E

XCKU035-3FBVA676E - -3 Kintex UltraScale FPGA | AMD

The AMD XCKU035-3FBVA676E is a Kintex UltraScale field-programmable gate array built on 20 nm FPGA technology, with 444,343 logic cells and a 676-ball FCBGA package. The -3 speed grade is the highest-performance grade in the XCKU035 family, making this device suited to demanding parallel processing, high-speed connectivity, signal processing, and accelerator workloads where logic density and timing performance are both important. A field-programmable gate array is a semiconductor whose digital logic, memory, and fixed hard blocks can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic semiconductor and a configurable SoC platform. The Kintex UltraScale family combines programmable logic fabric with high-speed serial transceivers, block RAM, DSP resources, and dedicated input/output resources for communications, industrial, defense, test, and embedded-processing systems. The XCKU035 device provides 444,343 logic cells, 1,945,600 related programmable resources, and 312 listed package-associated entries in the product listing. Its 676-ball FCBGA package supports a high-density pin arrangement required by a large FPGA. The -3 grade is specified for maximum performance within the family; the manufacturer documentation identifies -3 as the highest-performance speed grade, while -2, -1, and -1L are lower-speed or lower-static-power options. The device uses 20 nm FPGA technology and belongs to the Kintex UltraScale generation. Its architecture is intended for designs requiring substantial parallel logic, moderate-to-high-speed data movement, and flexible hardware customization. Exact transceiver count, DSP count, block-RAM capacity, I/O performance, operating-temperature limits, and power envelopes for the exact suffix must be confirmed in the package-specific AMD documentation before a production design is released. Typical Kintex UltraScale applications include high-speed network and storage interfaces, wireless and test-equipment basebands, industrial image processing, radar and signal-processing chains, high-performance embedded systems, and hardware accelerators. The large logic-cell count is especially useful when a design must combine parallel datapaths, buffering, protocol handling, control logic, and accelerator functions in one programmable device rather than across several fixed-function chips. PCB implementation should use the official 676-ball package outline, ball map, escape-routing rules, and power-decoupling recommendations. Because the package uses exposed thermal connections and high-speed I/O, plane assignment, via placement, return-path continuity, decoupling, and thermal management can materially affect signal integrity and junction temperature. This product page combines the exact XCKU035-3FBVA676E package and speed-grade identity with same-footprint family alternatives, application guidance, comparison parameters, and practical implementation notes. Verify the complete pin list, electrical limits, configuration method, and production status against AMD documentation for the exact ordering code before schematic capture or PCB release.

RFQ צור קשר
XCKU035-3FBVA900E - -3 Kintex UltraScale FPGA | AMD
XCKU035-3FBVA900E

XCKU035-3FBVA900E - -3 Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU035-3FBVA900E is a Kintex UltraScale field-programmable gate array built for high-performance programmable logic, signal processing, and accelerated system designs. The device uses the -3 speed grade, which AMD identifies as the highest-performance available Kintex UltraScale grade, and is packaged in a 900-BBGA FCBGA with 468 I/O sites. Its combination of large-scale parallel programmable logic and a high-density ball-grid-array package makes it suitable for demanding networking, industrial, test, defense, video, and compute-adjacent systems. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic can be configured after fabrication. The FPGA category sits above programmable logic devices in the broader semiconductor hierarchy and combines configurable logic blocks, block RAM, programmable I/O, dedicated processing resources, and high-speed interconnect fabric. Designers use this configurable architecture to implement parallel pipelines, protocol controllers, signal-processing functions, hardware accelerators, and complete interface subsystems without replacing custom silicon. The XCKU035 belongs to the Kintex UltraScale family, which balances large logic capacity with advanced serial connectivity and high-speed I/O. The -3 suffix identifies its performance grade, while FBVA900 identifies the 900-ball FCBGA package and E identifies the specified product-temperature option. The listed 468 I/O sites provide substantial board-level connectivity for high-speed memory, transceivers, clocks, and parallel interfaces. Exact resource counts, voltage ranges, transceiver counts, and timing limits should be confirmed against the AMD XCKU035 documentation for the selected design revision. At the architecture level, UltraScale devices organize programmable resources into advanced logic and memory blocks connected through a high-bandwidth network. This fabric supports wide parallel data paths and allows multiple logic, memory, and I/O-intensive blocks to operate concurrently. Designers can therefore partition functions into deterministic pipelines instead of relying on sequential processor execution. Board-level implementation still requires careful attention to pin assignment, power delivery, clock jitter, transceiver configuration, and thermal management. Typical applications include high-speed network-interface control, industrial automation and motion control, radar and signal-processing front ends, high-speed test equipment, video infrastructure, and embedded edge-computing systems. The 468-I/O package is particularly useful where a design needs numerous parallel interfaces alongside serial links. It is also appropriate for FPGA prototyping and hardware acceleration platforms that require considerably more parallel logic than small serial programmable logic devices. Design planning should begin with the AMD package pinout files and the device pin description, then reserve decoupling for each supply rail before assigning high-speed transceivers or external memory. A 900-BBGA device also requires a multilayer PCB with controlled-impedance routing, via-in-pad or equivalent interconnect structures, adequate thermal spreading, and assembly-process compatibility. Validate signal integrity, power sequencing, junction temperature, and configuration startup behavior in the final system rather than relying only on device-level simulation. This product record combines the exact AMD/Xilinx ordering code, package identity, I/O count, available speed-grade references, source documentation, and practical FPGA design guidance. It also identifies a same-package Kintex UltraScale option for speed or temperature planning while clearly separating those device options from true cross-brand equivalents.

RFQ צור קשר
XCKU035-3SFVA784E - 444343 Logic Cells FPGA | AMD
XCKU035-3SFVA784E

XCKU035-3SFVA784E - 444343 Logic Cells FPGA | AMD

The AMD XCKU035-3SFVA784E is a Kintex UltraScale field-programmable gate array with 444,343 logic cells, 468 I/O, and 19,456,000 embedded memory bits, packaged in a 784-ball FCCSP BGA. The -3 designation identifies the highest-performance speed grade in the XCKU035 family. Its combination of substantial programmable logic, on-chip memory, and high I/O count supports demanding parallel processing, data acquisition, signal processing, and communication systems. A field-programmable gate array is a reconfigurable digital semiconductor in which interconnect and logic functions are established by loading a programmable configuration. Within the product hierarchy, an FPGA is a programmable logic device within the broader integrated-circuit category. Unlike a fixed-function ASIC, an FPGA allows field updates, hardware reuse, and shorter product-development cycles when logic requirements evolve after initial design. The XCKU035 family combines 444,343 logic cells with 19,456,000 embedded memory bits and as many as 468 I/O in this configuration. This resource density allows multiple parallel data paths to coexist within one device. The 784-ball package also supports high-density board escape routing, although its fine-pitch ball array requires careful PCB layout, controlled assembly, and comprehensive inspection. The -3 speed grade favors designs in which maximum logic performance is more important than lower power or cost. The -3SFVA784E ordering code identifies the device family, speed grade, package, and temperature or grade options. Programmable logic, DSP-oriented arithmetic, high-speed serial connectivity, and general-purpose I/O can be combined within the same Kintex UltraScale design. System designers should evaluate timing closure, power integrity, configuration storage, clocking, and transceiver requirements against their specific end product. Typical applications include high-speed data acquisition, industrial control, communications infrastructure, test and measurement, video processing, and high-throughput digital signal processing. The large logic and memory resources suit parallel algorithms, while the 468 I/O support extensive external connectivity. Projects with modest logic needs should use a smaller FPGA to reduce board area, power, and assembly complexity. PCB implementation is the central hardware consideration for this 784-ball device. Follow the AMD package pinout, recommended escape routing, and power-delivery guidance when defining the PCB stack-up. Validate high-speed nets, supply sequencing, configuration access, thermal paths, and assembly process controls before releasing production artwork. This page combines device-specific resource data, same-footprint alternatives, comparison parameters, and practical implementation guidance. It is designed to help engineers distinguish speed-grade and temperature-grade variants, prepare a pin-compatible replacement strategy, and select the appropriate Kintex UltraScale device for a complex FPGA system.

RFQ צור קשר
XCKU040-1FBVA676C - 530K-Cell Kintex UltraScale FPGA | AMD
XCKU040-1FBVA676C

XCKU040-1FBVA676C - 530K-Cell Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU040-1FBVA676C is a Kintex UltraScale field-programmable gate array built on a 20 nm process, providing 530,250 logic cells, 21,606,000 RAM bits, and 312 user I/O in a 676-pin FCBGA package. The device operates from a 0.95 V core supply and is assigned the -1 speed grade. A field-programmable gate array is a reconfigurable digital semiconductor that combines programmable logic, block RAM, digital signal processing resources, programmable I/O, and high-speed serial transceivers. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and general-purpose processors because its parallel architecture can accelerate bitstream-defined data paths. The Kintex UltraScale family occupies the performance and resource range between smaller UltraScale devices and larger UltraScale+ devices. The XCKU040 resource totals include approximately 242,400 logic blocks or CLBs, 530,250 logic elements or cells, and 21,606,000 RAM bits. Its 312 user I/O support digital connectivity on the board, while the -1 speed grade identifies its timing and power class. These resources make the device suitable for parallel processing, protocol handling, image processing, data acquisition, and embedded control systems requiring deterministic hardware execution. The FCBGA package integrates 676 package connections and supports dense board-level routing needed for high-speed interfaces and programmable logic. Its 27 x 27 mm form factor is confirmed for the XCKU040-1FBVA676C. Because this is a high-pin-count BGA device, exact power delivery, escape routing, and differential-pair layout must follow the AMD package pinout files and the applicable device guidance rather than general BGA assumptions. Typical deployments include industrial vision, test and measurement, communications infrastructure, scientific instrumentation, and embedded signal-processing systems. In these applications, the FPGA can execute multiple parallel data paths in parallel, reduce external processor loading, and provide deterministic latency through fixed hardware pipelines. The 312 user I/O also permit direct interfacing with sensors, converters, memory, and network transceivers. Designers should verify power sequencing, decoupling, thermal performance, and high-speed signal integrity against the AMD documentation for the exact package and speed grade. A 676-pin FCBGA also requires careful PCB stack-up, via-in-pad or microvia strategy, and assembly process control. Confirm the pinout by device rather than inferring it from another XCKU040 package option. This page consolidates the verified resource totals, package characteristics, speed-grade designation, and practical design considerations for the XCKU040-1FBVA676C. It also distinguishes same-footprint alternatives by speed and temperature grade so engineers can identify a suitable replacement without overlooking device qualification requirements.

RFQ צור קשר
XCKU040-1FBVA900C - Kintex UltraScale FPGA | AMD
XCKU040-1FBVA900C

XCKU040-1FBVA900C - Kintex UltraScale FPGA | AMD

The AMD XCKU040-1FBVA900C is a Kintex UltraScale field-programmable gate array with 424,200 logic cells, 468 I/O sites, and a 900-pin FCBGA package. It is built on a 20 nm process and uses a nominal 0.95 V core voltage. The -1 speed designation identifies the performance grade, while the FBVA900C package code identifies the 900-ball surface-mount configuration. A field-programmable gate array, or FPGA, is a programmable semiconductor whose logic fabric, programmable input/output blocks, embedded memory, and dedicated hardware resources can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic device, an integrated circuit, and a semiconductor. FPGAs are selected when designers need hardware parallelism, reconfigurable interfaces, high-speed serial connectivity, or adaptable logic without fabricating a custom ASIC. The XCKU040 device provides 424,200 programmable logic cells and 468 I/O sites in a 900-pin FCBGA package. Its 20 nm Kintex UltraScale architecture supports integration of programmable logic with high-speed serial transceivers, block RAM, DSP resources, and dedicated clocking resources. The 0.95 V nominal core voltage places the device in a performance-oriented logic family, although complete system operation requires the voltage rails, decoupling, clocking, configuration, and power-management solution specified by AMD. The -1 suffix is the speed grade and the C suffix denotes the applicable commercial temperature and product classification. The part number also identifies the exact package, ball count, and underlying device variant required for footprint matching. Because this is a large BGA package with hundreds of balls, PCB escape routing, via-in-pad or through-via fanout, solder mask control, and assembly thermal design are as important as the logic configuration. Typical uses for XCKU040-class Kintex UltraScale devices include high-speed data acquisition, programmable signal processing, network packet processing, test and measurement, industrial control, machine vision, and embedded high-performance computing. An AMD reference design identified as PMP10630 demonstrates a compact multi-rail power architecture for an XCKU040 FPGA, illustrating the system-level power complexity associated with this device. The principal design trade-off is performance capability versus board complexity. A 900-ball FCBGA supports a large pin and power budget, but it requires a dense multilayer PCB, controlled impedance routing, extensive decoupling, and careful power sequencing. Prototype validation should use AMD-compatible design tools, the official UltraScale package pinout files, and the manufacturer’s configuration and power-delivery guidance. This product analysis brings together the exact device identity, package characteristics, verified technical highlights, relevant application context, and design constraints that engineers must evaluate beyond the basic catalog description. It also distinguishes true package-compatible alternatives from nearby speed or package options that cannot replace the device without PCB redesign.

RFQ צור קשר
XCKU040-1FBVA900I - 530250-Cell Kintex UltraScale FPGA | AMD
XCKU040-1FBVA900I

XCKU040-1FBVA900I - 530250-Cell Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU040-1FBVA900I is a Kintex UltraScale field-programmable gate array with 530,250 logic cells, 468 user I/O, and a 900-ball FCBGA package. It is manufactured on 20 nm technology, operates from a 0.95 V core supply, and carries the industrial-temperature designation indicated by the I suffix. The -1 speed grade places the device in the entry performance tier of the XCKU040 family, while FBVA900 identifies its large 900-ball package and A900 package variant. A field-programmable gate array is a programmable-logic device whose configurable interconnect and logic resources implement digital functions after the device is manufactured. Within the broader hierarchy, an FPGA is a programmable logic device, a semiconductor, and a reconfigurable implementation platform. Kintex UltraScale devices combine scalable logic, memory, DSP, high-speed I/O, and dedicated clocking resources for systems requiring substantial parallel processing and deterministic data movement. The XCKU040-1FBVA900I is designed for industrial-temperature applications where a high pin count, 468 user I/O, and FPGA-scale programmable logic are important. Its 20 nm process implementation supports a 0.95 V core operating voltage, while the 900-ball package provides extensive signal access for high-bandwidth interfaces. The industrial suffix distinguishes its environmental qualification from commercial-temperature ordering codes, while the -1 grade identifies the device's performance class within the family. The 530,250-cell figure describes the device's programmable logic scale rather than a fixed number of independent processor cores. Designers can instantiate parallel datapaths, protocol engines, control logic, and hardware accelerators in one device, reducing the number of discrete components on complex digital platforms. Exact resource distributions, I/O standards, memory quantities, clocking limits, power data, and configuration requirements must be confirmed against the AMD device documentation for the final design. Typical implementation areas include industrial automation, high-speed communications, instrumentation, test and measurement, embedded control, signal processing, and adaptable compute platforms. In these systems, the large I/O count can support multiple interfaces and parallel buses, while the large logic fabric can consolidate functions that would otherwise require several discrete programmable or fixed-function devices. Board design must account for the 900-ball package, power sequencing, decoupling, configuration storage, thermal management, and high-speed routing. For a new Kintex UltraScale design, confirm the required package, speed grade, temperature range, supported I/O standards, power budget, and development-tool compatibility before schematic capture. For an existing XCKU040-1FBVA900I board, use the AMD package pinout files and device documentation when assigning every ball, power rail, configuration signal, and I/O constraint. This page combines the verified device identity with practical replacement, application, and PCB-planning guidance. It distinguishes documented XCKU040 family variants from unsupported substitutions and emphasizes that a true drop-in replacement must preserve the 900-ball footprint, electrical requirements, speed grade, temperature grade, and pin compatibility.

RFQ צור קשר
XCKU040-1SFVA784C - 530K Logic Cell Kintex UltraScale FPGA | AMD
XCKU040-1SFVA784C

XCKU040-1SFVA784C - 530K Logic Cell Kintex UltraScale FPGA | AMD

The AMD XCKU040-1SFVA784C is a Kintex UltraScale field-programmable gate array with 530,250 logic elements, 468 I/O, and 784-ball BFBGA packaging in a square FCCSP configuration. The device combines programmable logic resources, high-speed programmable I/O, dedicated memory, programmable clocking, and hard processing resources in one FPGA package. Its 784-BFBGA footprint supports dense designs requiring substantial interconnect bandwidth and pin access. A Kintex UltraScale FPGA is a semiconductor in the FPGA and CPLD family, which sits between fixed-function logic and software-programmable processors. Unlike an ASIC, an FPGA permits configuration-time changes to logic, memory organization, pin functions, and interfaces. Unlike a processor-centric system, it implements parallel datapaths directly in programmable hardware, reducing latency for tasks such as protocol termination, signal processing, storage interfacing, and data movement. The listed device provides 530,250 logic elements and 468 I/O, giving an architecture-oriented balance between compute capacity and external connectivity. The 468 available I/O can support high-pin-count interfaces, although designers must account for dedicated configuration, power, clock, and ground assignments when planning a board. Its -1 speed designation identifies a specific performance grade, while the 784-ball package provides the physical interface for power delivery, configuration, differential I/O, and internal fabric connectivity. The XCKU040 device belongs to the Kintex UltraScale generation, where programmable logic resources combine with dedicated hard blocks for memory and high-speed serial or parallel data movement. This mixed architecture is useful when a design needs both flexible control logic and deterministic parallel throughput. Exact core voltage, power envelope, RAM capacity, transceiver configuration, supported clocking resources, and static timing values should be established from the applicable AMD product documentation and device-specific implementation tools. Typical uses include industrial control and automation, network packet processing, test and measurement, high-speed storage interfaces, embedded vision, telecommunications equipment, and defense or aerospace platforms requiring programmable logic density. The 468-I/O count is particularly useful for designs combining multiple buses, sensor inputs, converters, memory interfaces, and communication links on a single board. PCB implementation should treat the 784-BFBGA package as a demanding fine-pitch design. Use the AMD package pinout and PCB library, provide a power and ground plane architecture appropriate for the complete device, and route high-speed interfaces according to the selected bank constraints. Confirm voltage compatibility, decoupling, configuration access, thermal performance, and all unused balls before releasing artwork for fabrication. This page consolidates the exact package and logic figures, verified sourcing links, pin-compatible Kintex UltraScale options, application guidance, and engineering-focused comparison points. It also distinguishes documented device facts from parameters that require the AMD datasheet, product selection guide, and Vivado implementation results before a production design is approved.

RFQ צור קשר
XCKU040-1SFVA784I - 530K Logic FPGA, 784-BGA | AMD
XCKU040-1SFVA784I

XCKU040-1SFVA784I - 530K Logic FPGA, 784-BGA | AMD

The AMD XCKU040-1SFVA784I is a Kintex UltraScale field-programmable gate array featuring 530,250 logic elements, 30,300 logic array blocks and configurable logic blocks, 21,606,000 RAM bits, and 468 user I/O pins in a 784-FCBGA package. It operates from a 0.922 V to 0.979 V supply range and is built on 20 nm FPGA technology. A field-programmable gate array is a semiconductor whose digital logic, memory, signal processing, and I/O behavior are configured after manufacture. The Kintex UltraScale family sits between FPGA performance and programmable logic device cost, combining substantial programmable resources with dedicated high-speed I/O and hardened interface capabilities. XCKU040-1SFVA784I is intended for designs requiring a large fabric, extensive parallel connectivity, and numerous user I/O rather than a small general-purpose microcontroller. The -1 speed grade identifies the device's performance class, while the SFVA784 package code identifies the 784-ball flip-chip ball-grid-array configuration. With 468 user I/O pins, the device can support substantial external connectivity. Its 21,606,000 RAM bits provide on-chip storage for packet buffering, data acquisition, video processing, control logic, and general-purpose FPGA workloads. The industrial temperature specification covers junction temperatures from -40 °C to 100 °C. The 20 nm Kintex UltraScale architecture combines programmable logic resources with dedicated resources for high-speed serial links, memory interfaces, and DSP-oriented processing. Engineers use the device for protocols, data acquisition, test equipment, industrial control, communications infrastructure, and embedded signal-processing systems. Device configuration, timing constraints, clocking, and I/O standards must be implemented through the associated AMD FPGA design flow. Typical deployments include high-speed network interfaces, radar and aerospace signal-processing platforms, factory automation controllers, high-resolution imaging systems, and telecommunications equipment. The 468 user I/O pins are especially useful where a design combines wide parallel buses with high-speed serial links. A 784-FCBGA package also demands careful PCB planning, including escape routing, power delivery, thermal management, and assembly-process compatibility. The principal design consideration is package complexity. A 784-ball BGA requires a dense multilayer PCB with controlled impedance, via-in-pad or escape routing, and accurate assembly alignment. Power rails must support the stated 0.922 V to 0.979 V operating range, and junction temperature must remain within the industrial limit. Use the AMD package pinout files and UltraScale design documentation when assigning every ball and power plane. This page combines the exact device specifications, package information, pin-compatible family alternatives, application guidance, and practical PCB considerations to support component selection and hardware planning without relying on the manufacturer datasheet alone.

RFQ צור קשר
XCKU040-2FBVA676E 530250-Cell Kintex UltraScale FPGA | AMD
XCKU040-2FBVA676E

XCKU040-2FBVA676E 530250-Cell Kintex UltraScale FPGA | AMD

The AMD XCKU040-2FBVA676E is a Kintex UltraScale field-programmable gate array with 530,250 logic cells, 21,606,000 RAM bits, 312 user I/Os, and a 676-ball FCBGA package. It combines programmable logic, block RAM, DSP resources, programmable I/O, and high-speed connectivity on a 20 nm device platform. A field-programmable gate array is a semiconductor whose digital logic, memory, signal processing, and interface functions are configured after manufacture. The FPGA hierarchy extends from configurable logic blocks and programmable I/O to system-level functions such as hardware acceleration, network interfaces, and embedded control. Kintex UltraScale devices occupy the middle of the AMD/Xilinx product portfolio between lower-cost UltraScale devices and higher-end Virtex UltraScale devices. Three headline resources define the XCKU040-2FBVA676E: 530,250 programmable logic cells, 21.606 million RAM bits, and 312 user I/Os. The -2 speed designation identifies its performance grade, while FBVA676 specifies the 676-ball fine-pitch BGA package. The package is designed for multilayer PCB construction where controlled power, ground, and high-speed routing are essential for reliable operation at FPGA switching speeds. The device is suitable for parallel processing, protocol termination, high-speed data capture, video processing, wireless infrastructure, and embedded systems requiring substantial programmable logic. Its 676-ball FCBGA footprint provides more I/O and power connectivity than lower-pin-count packages, enabling wide parallel interfaces and multiple high-speed transceivers. The 20 nm process generation supports a strong balance of logic density, memory bandwidth, power efficiency, and design flexibility. For communications equipment, the FPGA can implement datapath control, packet classification, aggregation, and interface conversion in one programmable device. Video and machine-vision systems can use parallel logic for pixel processing, while industrial control systems can combine deterministic interfaces with configurable logic. In test equipment, the device can generate or analyze high-volume digital data and implement protocol-specific logic without relying on a fixed-function ASIC. PCB design requires careful separation of power and ground planes, short return paths for high-speed signals, and pin-compatible fanout from the BGA. Decoupling should be distributed near the package power balls, while differential and serial channels require length-aware routing and continuous reference planes. The AMD UltraScale package pinout files and UG575 should be used directly when assigning every ball, configuring power rails, and validating board escape routing. This product page combines the device resource summary, package constraints, drop-in alternatives, application guidance, and practical design checks. It is intended to help engineers determine whether the Kintex UltraScale architecture, -2 speed grade, 312 I/O count, and 676-ball footprint match a specific system requirement before beginning schematic capture or PCB layout.

RFQ צור קשר
XCKU040-2FBVA676I - 424K Kintex UltraScale FPGA | AMD
XCKU040-2FBVA676I

XCKU040-2FBVA676I - 424K Kintex UltraScale FPGA | AMD

AMD XCKU040-2FBVA676I is a Kintex UltraScale field-programmable gate array with 424,200 logic cells, 312 user I/Os, a -2 speed grade, and a 676-BBGA FCBGA package. It is manufactured on 20 nm technology and uses a 0.95 V core supply. The device combines programmable logic, fixed and configurable I/O resources, embedded memory, high-speed serial connectivity, and dedicated processing resources in one package. An FPGA is a semiconductor whose digital circuit is configured after manufacture. A Kintex UltraScale belongs to the FPGA and adaptive-computing hierarchy, where programmable logic can accelerate parallel algorithms, implement communication interfaces, consolidate functions, and adapt to changing field requirements. Compared with a fixed-function ASIC, an FPGA allows design revisions through configuration rather than fabrication changes. The XCKU040-2FBVA676I offers 424,200 programmable logic cells and 312 user I/O in the industrial -2 speed-grade configuration. Its 676-BBGA FCBGA package supports high-density interconnection and is intended for demanding boards requiring substantial logic, memory resources, and external interface bandwidth. The -2 designation identifies the device's performance class within the Kintex UltraScale family. Kintex UltraScale devices combine programmable logic fabric with high-speed transceivers, memory interfaces, clocking resources, and hardened processing blocks. The 20 nm implementation and 0.95 V VCCINT operating point place substantial performance and power requirements on board-level power delivery. Configuration, programming, clock distribution, transceiver equalization, and I/O standards must therefore be treated as one integrated design problem rather than separate FPGA concerns. Typical uses include high-throughput signal processing, industrial networking, data acquisition, test and measurement, video infrastructure, communications equipment, and embedded processing accelerators. In these systems, the FPGA's parallel architecture can execute multiple lanes or filtering stages concurrently, while programmable I/O supports specialized interfaces. Design teams should select board-level transceivers, regulators, memory, and connectors that satisfy the signal-integrity and power-delivery limits for the selected I/O standards. A critical implementation concern is package and power integrity. The 676-BBGA device requires a dense multilayer PCB, careful escape routing, adequate thermal vias under the package, and decoupled supply rails. Add the exposed thermal pad or thermal-via structure specified by the package drawing, and verify every voltage rail against the AMD XCKU040 device documentation before schematic capture. This product record combines the verified device identity, package, logic-cell count, I/O count, technology node, voltage, and speed grade with practical guidance for FPGA selection, PCB implementation, power delivery, and migration. It is intended to help engineers identify the correct AMD/Xilinx device and plan a board-level design without confusing speed-grade, package, or lifecycle differences.

RFQ צור קשר
XCKU040-2FBVA900E - 530K-Cell Kintex UltraScale FPGA | AMD
XCKU040-2FBVA900E

XCKU040-2FBVA900E - 530K-Cell Kintex UltraScale FPGA | AMD

The AMD XCKU040-2FBVA900E is a Kintex UltraScale field-programmable gate array built on a 20 nm process, with 530,250 logic cells, 468 user I/Os, and 21,606,000 RAM bits in a 900-ball FCBGA package. It operates from a 0.95 V core supply and is designed for high-performance programmable-logic systems that require substantial parallel processing, high-speed serial connectivity, and deterministic programmable logic. A field-programmable gate array is a programmable-logic device that can be configured after manufacture to implement digital functions. Within the product hierarchy, this Kintex UltraScale device combines configurable logic blocks, block RAM, DSP resources, programmable input/output, and high-speed transceivers. The UltraScale architecture places these resources in a fabric designed for scalable data paths, making the device suitable for systems that need more flexibility than a fixed application-specific integrated circuit. Key device attributes include 530,250 logic cells, 30,300 logic-array blocks or configurable logic blocks, 468 user I/Os, and 21,606,000 bits of block RAM. The device uses a 0.95 V core supply and is manufactured in a 20 nm process. Its 900-ball flip-chip ball-grid-array package provides 31 mm by 31 mm body dimensions and supports a large pin count for power distribution, configuration, memory interfaces, transceivers, and general-purpose I/O. The -2 designation identifies the device’s performance-grade option within the XCKU040 family, while the final E suffix identifies the associated package and temperature-grade ordering variant. The 900-ball FCBGA footprint is intended for multilayer printed-circuit boards with controlled escape routing and power-delivery networks. Exact transceiver rates, maximum I/O standards, configuration characteristics, power consumption, and operating-temperature limits should be selected from the manufacturer’s device tables and package documentation. Typical applications include high-speed network packet processing, industrial control and automation, high-performance computing, test and measurement equipment, machine vision, signal processing, and adaptable accelerator logic. The large logic and RAM resources allow parallel algorithms to be implemented in programmable hardware, while the 468 user I/Os support interfaces to external memory, converters, transceivers, clocks, and board-level control signals. PCB implementation requires careful attention to ball-grid-array escape routing, layer transitions, power-plane geometry, decoupling, thermal management, and high-speed signal integrity. The 31 mm by 31 mm package also demands a controlled board-construction process because power delivery and thermal performance are tightly coupled in large FPGA designs. This page combines the exact orderable MPN, verified package and resource details, application guidance, comparison criteria, and practical design considerations. It also distinguishes package-compatible family variants from devices that require a different footprint, allowing engineering teams to assess replacement options without confusing functional similarity with true drop-in compatibility.

RFQ צור קשר
XCKU040-2FBVA900I - Kintex UltraScale FPGA | AMD
XCKU040-2FBVA900I

XCKU040-2FBVA900I - Kintex UltraScale FPGA | AMD

The AMD XCKU040-2FBVA900I is a Kintex UltraScale field-programmable gate array built on a 20 nm process, with 424,200 programmable logic cells, 468 user I/O, and a 900-ball FCBGA package. It operates from a 0.95 V core supply and is graded for industrial-temperature equipment. The device combines programmable logic, DSP resources, block RAM, high-speed serial connectivity, and hard processing blocks in one programmable device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interfaces, and signal-processing functions can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, embedded memory, dedicated DSP blocks, programmable input/output, and clocking resources. This makes it suitable when system functions must be updated, parallelized, or implemented with hardware-level timing rather than fixed application-specific logic. The XCKU040 provides 424,200 logic cells and 468 user I/O in a 900-ball FCBGA package. The -2 speed designation identifies the device's performance grade within the Kintex UltraScale family. Its 0.95 V core voltage reflects the use of advanced process technology, while the large I/O count supports interfaces to external memory, network transceivers, converters, and parallel digital systems. The Kintex UltraScale architecture integrates dedicated DSP, block RAM, memory controllers, high-speed transceivers, and security features. These resources allow designers to implement parallel signal processing, data acquisition, packet processing, and accelerator logic in a single device. Because the fabric is programmable, the same hardware platform can accommodate different algorithms and interface configurations when field updates are important. Typical applications include 5G and wireless infrastructure, high-speed networking, industrial vision, test and measurement, machine-learning accelerators, DSP processing, and high-performance embedded systems. The industrial grade and large I/O count are especially useful for equipment that must combine extensive parallel connectivity with programmable real-time processing. Board design requires careful attention to the 900-ball FCBGA footprint, multilayer power distribution, high-speed routing, decoupling, clocking, and thermal performance. Follow the AMD package pinout files and UltraScale design guidance to assign every ball and validate the power, clock, and transceiver configuration before fabrication. This product page consolidates the exact MPN identity, package information, selection guidance, drop-in family alternatives, comparison data, and practical design notes needed to evaluate the XCKU040-2FBVA900I for a new programmable-logic design.

RFQ צור קשר
XCKU040-2FFVA1156I - Kintex UltraScale FPGA 520 I/O | AMD
XCKU040-2FFVA1156I

XCKU040-2FFVA1156I - Kintex UltraScale FPGA 520 I/O | AMD

The AMD XCKU040-2FFVA1156I is a Kintex UltraScale FPGA with 520 user I/O, 21,606,000 system logic capacity, 530,250 DSP-equivalent resource units, speed grade -2, in a 1156-ball FCBGA package rated for industrial temperatures of -40C to +100C. A Field Programmable Gate Array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks (CLBs), DSP slices, block RAM, and programmable interconnect that designers configure after manufacturing. Within the power-management hierarchy of digital system ICs, an FPGA sits at the top of the programmable logic taxonomy: programmable logic device (PLD) -> FPGA -> system-on-chip FPGA. FPGAs are used where custom logic, parallelism, or post-deployment reconfigurability is required that fixed-function ASICs or microcontrollers cannot provide. Key features of the XCKU040-2FFVA1156I include the 20nm UltraScale architecture, which lowers total power consumption versus the previous 28nm 7-series generation, a -2 speed grade for high-performance designs, and an industrial (I-suffix) temperature rating of -40C to +100C. The 1156-ball flip-chip BGA provides 520 user I/O for high-bandwidth parallel interfaces, and the fabric includes MMCM and PLL clock management resources. On the technical side, the Kintex UltraScale family focuses on price/performance using monolithic 20nm die. The device core supply operates from 0.922V to 0.979V per the datasheet listing. The UltraScale architecture adds enhanced routing, higher DSP throughput, and improved clocking compared to Kintex-7, making the XCKU040 a popular mid-density choice between the XCKU035 and XCKU060. Typical applications include industrial image processing and machine vision, wireless baseband and RF front-end processing, medical ultrasound, and ASIC prototyping. The 520 I/O count suits multi-camera sensor aggregation and high-width data converters. Design consideration: FCBGA-1156 devices require careful PCB stackup design - escape routing under the 1.0mm ball pitch typically needs via-in-pad or at least 8 layers, and core voltage rails must meet the tight 0.922-0.979V tolerance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
XCKU040-2SFVA784E - 530K Logic Cells FPGA | AMD
XCKU040-2SFVA784E

XCKU040-2SFVA784E - 530K Logic Cells FPGA | AMD

The AMD XCKU040-2SFVA784E is a Kintex UltraScale FPGA with 530,000 system logic cells, 21,606 Kb of block RAM and 1,920 DSP slices in a 784-FCCSP BGA package. The -2 speed grade targets performance-oriented designs, while the extended-temperature suffix supports a 0°C to 100°C junction range. A field-programmable gate array is a programmable digital logic device within the broader FPGA and semiconductor hierarchy. Instead of implementing fixed Boolean logic in an ASIC, an FPGA combines configurable LUTs, routing resources, block RAM, DSP blocks and programmable I/O. This allows designers to implement parallel data processing, protocol bridging, control logic and high-speed interfaces on one integrated circuit. The XCKU040 device provides 530,000 system logic cells and 1,920 DSP slices, giving it substantial parallel arithmetic capacity. Its 21,606 Kb of block RAM supports buffering, packet storage and data-plane workloads. The SFVA784 package provides 468 I/O according to the product listing, enabling high pin-count connectivity for high-speed networking, industrial processing and test equipment. The package measures 23 mm by 23 mm. The 20 nm Kintex UltraScale architecture combines programmable logic with dedicated DSP, memory and high-speed I/O resources. The -2 performance designation identifies the device speed grade, while E identifies the extended-temperature product configuration. Bank-specific I/O standards and pin placement must be selected from the AMD package files when implementing memory interfaces, serial links or other high-speed peripherals. Typical uses include 100G networking equipment, industrial vision and control systems, signal-processing platforms, high-performance computing and communications infrastructure. The 468-I/O package is particularly useful when a design requires substantial parallel connectivity, multiple memory interfaces or high lane counts. The 1,920 DSP slices also suit filtering, modulation, FFT and other multiply-accumulate intensive operations. PCB implementation requires careful power delivery, decoupling and ball-grid-array layout. Follow the AMD package pinout files and UltraScale layout guidance for exact ball assignments. Provide continuous power and ground planes, place decoupling capacitors close to supply balls, and verify thermal performance across the full 0°C to 100°C junction range. This product page combines the verified device configuration, package details, search-driven technical queries, drop-in family options and practical implementation guidance. These resources help engineers identify the correct XCKU040 package and speed grade while planning resources, pin assignments, power delivery and replacement decisions.

RFQ צור קשר