מוצרים (44,000+)

VSC8522XJQ-12 - 12-Port QSGMII GbE PHY | Microchip
VSC8522XJQ-12

VSC8522XJQ-12 - 12-Port QSGMII GbE PHY | Microchip

The Microchip Technology VSC8522XJQ-12 is a 12-port Gigabit Ethernet PHY with QSGMII connectivity and industrial-temperature positioning. It integrates 12 copper Gigabit Ethernet PHYs in one package, uses a power-efficient voltage-mode design, and is manufactured on 65 nm technology. The device is intended for multiport Ethernet equipment in which twelve physical-layer channels are required without implementing twelve separate PHY packages. Its QSGMII interface consolidates multiple Gigabit Ethernet channels onto a high-speed serial connection, while the integrated PHYs provide the physical-layer functions required between twisted-pair copper media and the digital MAC or switching layer. A multiport Gigabit Ethernet PHY is an interface IC that converts high-speed serial data into standards-compliant copper Ethernet signaling and converts received copper signals back into digital data. In the product hierarchy, the VSC8522 belongs to Ethernet PHYs, physical-layer interface ICs, interface ICs, and integrated semiconductors. Its 12 integrated PHYs make it particularly useful for access switches, industrial Ethernet equipment, and communication systems requiring dense copper-port implementations within a single device. The principal advantages of the VSC8522 are port integration, QSGMII connectivity, voltage-mode operation, and 65 nm implementation. Twelve integrated PHYs reduce the number of discrete Ethernet interface devices required in a multiport system. The voltage-mode architecture is specifically described by the manufacturer as power efficient, while the 65 nm process supports a cost-conscious implementation for networking equipment. The device family also incorporates Energy Efficient Ethernet functionality under IEEE 802.3az, addressing power reduction requirements in Ethernet networks. Technically, the VSC8522 family is organized around twelve 1000BASE-T copper PHY channels and a serial host-side interface. QSGMII allows the MAC or switching entity to communicate with multiple PHYs over a shared interface, reducing host pin requirements compared with separate parallel or serial interfaces for every channel. The voltage-mode implementation and integrated PHY count are important architectural characteristics, but clocking, power-supply sequencing, register access, magnetics integration, and media impedance details must be implemented according to the manufacturer datasheet and reference design. Typical uses include industrial Ethernet switches, telecommunication access equipment, network appliances with twelve copper ports, and factory-automation interfaces requiring Gigabit Ethernet connectivity. Industrial use is consistent with the target ordering code's industrial-temperature designation. QSGMII is particularly useful where the host processor would otherwise require many dedicated Ethernet interfaces, while the integrated PHY array simplifies board partitioning compared with a twelve-chip implementation. The principal design constraint is that QSGMII is not a generic plug-and-play Ethernet port. The host interface requires correct clocking, electrical layout, synchronization, and firmware or driver support, while each copper port requires its own magnetic-component and termination implementation. Maintain short, controlled-impedance high-speed traces, follow the reference layout, and validate magnetics and cable compatibility before production. Do not substitute a PHY with a different host interface without redesigning both the PCB and device driver. This product overview combines the manufacturer's family architecture with ordering, packaging, interface, and replacement information. It also organizes the main selection trade-offs among VSC8522 ordering variants and identifies which specifications require confirmation from the exact package datasheet before schematic release.

RFQ צור קשר
VSC8530XMW-03 Single-Port Copper Ethernet PHY | Microchip
VSC8530XMW-03

VSC8530XMW-03 Single-Port Copper Ethernet PHY | Microchip

The Microchip Technology VSC8530XMW-03 is a single-port industrial-grade copper Ethernet PHY with RGMII and RMII interfaces, IEEE 802.3az Energy Efficient Ethernet support, and Wake-on-LAN capability. It is packaged in a 48-QFN, 6 mm x 6 mm single-row surface-mount package for space-constrained Ethernet equipment. An Ethernet physical-layer transceiver, commonly called a copper PHY, converts logical data transmitted by a host controller into signals that can travel over twisted-pair Ethernet cabling. Within the network hierarchy, the VSC8530XMW-03 connects an Ethernet media system to an RGMII- or RMII-based digital controller. Its single-port design suits one copper Ethernet link while its 6 mm x 6 mm package supports compact industrial, communications, and embedded-network designs. The principal features of this device include support for RGMII and RMII host interfaces, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, and a broad selection of LVCMOS I/O levels. The combination of a compact 48-QFN package and low-power, small-form-factor design is particularly useful where board area, energy use, and standardized copper connectivity are important design constraints. The VSC8530 belongs to the VSC85xx family of industrial-grade single-port Fast Ethernet copper PHYs. The -03 device is associated with the 6 mm x 6 mm package variant of that family. Host-interface selection is a central design decision because RGMII and RMII provide different data widths and signaling arrangements. PCB layout must also preserve the high-speed digital signal integrity required between the PHY and host controller. Typical uses include industrial Ethernet controllers, communications equipment, embedded routers, single-port network appliances, and copper network interfaces operating in compact enclosures. The device can be used where one Ethernet port is sufficient and energy-efficient link operation helps reduce power consumption during inactive periods. Its Wake-on-LAN function supports remote activation and network-maintenance workflows. For implementation, follow the manufacturer pin-description table and recommended layout guidance when assigning all 48 package connections and decoupling capacitors. The exposed pad and thermal path require careful PCB design, while RGMII or RMII routing requires short, controlled-impedance connections. Confirm the exact interface mode, clocking arrangement, and termination requirements before releasing the PCB. This product page combines package identification, interface-focused engineering guidance, lifecycle information, and structured comparisons with the closest documented same-family alternatives. It is intended to help hardware engineers verify footprint compatibility, select the correct -03 revision, and plan an industrial copper Ethernet implementation with fewer board-level integration errors.

RFQ צור קשר
VSC8530XMW-04 - 1-Port 10/100 Cu PHY | Microchip
VSC8530XMW-04

VSC8530XMW-04 - 1-Port 10/100 Cu PHY | Microchip

The Microchip Technology VSC8530XMW-04 is a single-port copper Ethernet physical-layer transceiver supporting 10 Mbps and 100 Mbps operation. It provides RGMII and RMII host interfaces, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, and iTMP Synchronous Ethernet support. The device is packaged in a 48-pin, single-row QFN with a 6 mm by 6 mm body and exposed thermal pad. An Ethernet PHY, also called a copper physical-layer transceiver, converts logical data into signals that can traverse a twisted-pair Ethernet cable and recovers those signals at the receiving endpoint. Within the Ethernet hierarchy, the PHY sits between a MAC or switch fabric and a network transformer or integrated magnetics. The VSC8530XMW-04 therefore serves as the physical-layer interface for compact industrial, communications, and embedded Ethernet equipment. The principal features of this VSC8530-04 device include one 10/100BASE-T port, support for RGMII and RMII host interfaces, and broad LVCMOS I/O compatibility. IEEE 802.3az Energy Efficient Ethernet can reduce power consumption when link traffic is light, while Wake-on-LAN supports remote activation. iTMP Synchronous Ethernet adds timing-related functionality for systems requiring precise network clock support. The single-row QFN-48 construction measures 6 mm by 6 mm and is intended for space-constrained equipment. Its exposed pad provides the primary thermal and electrical connection to the PCB. RGMII offers a parallel, high-speed host connection for higher-performance Ethernet designs, whereas RMII reduces host interface pin count and can simplify routing on cost-sensitive or space-constrained platforms. Typical applications include industrial Ethernet gateways, compact network switches, embedded controllers, serial-to-Ethernet equipment, and communications equipment requiring a copper 10/100 connection. The device is also appropriate for synchronized network equipment requiring iTMP support and systems that need Wake-on-LAN behavior over wired Ethernet. PCB implementation requires careful high-speed signal routing, a controlled 50-ohm differential transmission path, adequate ground-plane continuity, and clean separation between Ethernet and sensitive analog circuitry. Place the PHY close to the magnetics or network connector, follow the manufacturer's reference-layout guidance, and provide the specified power, decoupling, and crystal or clock components. This product page consolidates the manufacturer's functional description, package information, interface options, sourcing fields, and drop-in alternatives into an engineering-focused reference. It also provides application guidance and a comparison of documented characteristics for easier design qualification and replacement assessment.

RFQ צור קשר
VSC8531XMW - Single-Port GbE Cu PHY | Microchip Technology
VSC8531XMW

VSC8531XMW - Single-Port GbE Cu PHY | Microchip Technology

The Microchip Technology VSC8531XMW is a low-power, single-port Gigabit Ethernet copper PHY with parallel RGMII and RMII MAC interfaces, designed for space-constrained 10/100/1000BASE-T equipment. It is housed in a 48-QFN package measuring 6 mm by 6 mm. The device supports both Gigabit and Fast Ethernet copper links while providing integrated line-side termination to reduce board area, external component count, and electromagnetic interference. An Ethernet physical layer transceiver converts digital MAC data into electrical signals for transmission over twisted-pair cabling, and reverses that process on the receive side. The VSC8531 belongs to the Ethernet PHY hierarchy, connecting a host processor or network controller through RGMII or RMII to a 10/100/1000BASE-T network interface. Its compact package and integrated termination suit access points, industrial gateways, switches, embedded controllers, and compact communication equipment. Key features include a single 10/100/1000BASE-T port, RGMII version 2.0 timing-compensation support, and configurable drive strength on the MAC interface. The RGMII compensation function removes the need for external on-board delay lines, simplifying high-speed layout. FindIC lists device supply levels of 0.95 V and 2.38 V for the VSC8531XMW configuration, while Microchip describes the part as a low-power PHY for 10/100/1000BASE-T applications. The PHY architecture integrates line-side termination directly into the package. This approach conserves board space, reduces component count, and can improve signal integrity by keeping the termination close to the copper magnetics. A single-row 48-QFN package also supports compact layouts, although the exposed pad requires careful thermal-via placement to transfer heat from the device. Typical uses include industrial Ethernet gateways, compact network switches, wireless access-point equipment, set-top boxes, embedded platforms, and telecom access hardware. The RMII option is useful with controllers using a reduced parallel interface, while RGMII supports higher-throughput Gigabit designs and includes on-die timing compensation that can simplify source-synchronous routing. For a robust layout, place the PHY close to the RJ45 connector and transformer, keep the line-side differential pairs short and matched, and provide a low-impedance ground plane around the exposed pad. Use the pin-description table and reference layout in the manufacturer datasheet when assigning nets and checking decoupling. This page combines package details, interface capabilities, application guidance, verified drop-in ordering options, and practical PCB considerations. It is intended to help engineers identify the correct VSC8531 configuration and plan a compact, EMI-conscious Gigabit Ethernet front end.

RFQ צור קשר
VSC8531XMW-01 - 1-Port Gigabit Copper PHY | Microchip
VSC8531XMW-01

VSC8531XMW-01 - 1-Port Gigabit Copper PHY | Microchip

The Microchip Technology VSC8531XMW-01 is a single-port Gigabit Ethernet copper PHY supporting 10/100/1000BASE-T operation through RGMII or RMII interfaces. It provides a 1 Gbps data rate, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN support, and broad LVCMOS interface-voltage compatibility in a 48-QFN package measuring 6 mm x 6 mm with a 0.4 mm terminal pitch. A copper PHY is an interface integrated circuit that converts data between a digital network processor and physical copper wiring. It belongs to the Ethernet interface IC hierarchy: PHY transceiver, physical-layer device, network interface IC, and semiconductor. The VSC8531XMW-01 combines 10/100/1000BASE-T physical signaling with configurable MAC-facing interfaces, allowing a network processor, router, switch, or embedded system to communicate through standard twisted-pair Ethernet links. Key features include one Gigabit copper port, RGMII and RMII support, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN operation, hardware-configured operating modes, and configurable MAC-interface drive strength. The broad I/O LVCMOS support is useful when the PHY must interface with systems using different logic levels. Hardware configuration is performed by sampling output pins on the rising edge of reset and holding selected pins high or low, reducing the need for complex register initialization in straightforward designs. The device is designed for space-constrained equipment where a 6 mm x 6 mm surface-mount package is valuable. Its single-row 48-QFN construction supports compact routing while providing separate Ethernet and MAC-side interfaces. According to the Microchip VSC8531-01 datasheet, the device can also operate in systems that power terminal equipment through the twisted pair in accordance with the power-over-Ethernet arrangement described in IEEE 802.3af Clause 33. Exact operating limits, internal clock requirements, and recommended magnetics depend on the selected system configuration. Typical applications include compact routers, Ethernet switches, industrial control equipment, set-top and network appliances, USB-to-Ethernet products, and embedded systems requiring 10/100/1000BASE-T connectivity. RGMII is appropriate for higher-throughput parallel processor interfaces, while RMII reduces pin count in cost- and power-sensitive embedded designs. Wake-on-LAN can support remote wake-up behavior in network equipment, and Energy Efficient Ethernet can reduce link activity when the traffic load is low. PCB implementation should follow the manufacturer's hardware design checklist for magnetics, termination, clocking, decoupling, and differential pair routing. Keep the PHY, Ethernet magnetics, and high-speed copper traces close together, provide the specified decoupling capacitors close to their supply pins, and route each differential pair as a controlled-impedance pair with minimal vias. Do not infer the complete pin configuration from a marketplace summary; use the pin-description and layout sections in the manufacturer datasheet before releasing a PCB. This page organizes the principal device identity, package information, application guidance, comparison points, and design considerations into one engineering-focused reference. It also distinguishes the exact VSC8531XMW-01 order code from related VSC8531 variants so procurement and PCB reuse decisions can be made against the appropriate Microchip ordering information.

RFQ צור קשר
VSC8531XMW-02 - GbE Cu PHY RGMII/RMII | Microchip 48-QFN
VSC8531XMW-02

VSC8531XMW-02 - GbE Cu PHY RGMII/RMII | Microchip 48-QFN

The Microchip VSC8531XMW-02 is a single-port Gigabit Ethernet copper PHY transceiver supporting RGMII and RMII MAC interfaces, housed in a 48-pin QFN (6x6 mm) package with RGMII/RMII MAC connectivity for 10/100/1000BASE-T applications. It integrates a low-power architecture, hardware-configurable modes of operation via sampled pin states on reset, and Microchip's EcoEthernet v2.0 technology with IEEE 802.3az Energy-Efficient Ethernet (EEE) support. The device is qualified for industrial-grade operation and targets space-constrained embedded Ethernet designs. A Gigabit Ethernet PHY (Physical Layer transceiver) is the analog/digital mixed-signal IC that connects a Media Access Controller (MAC) to a copper twisted-pair cable. The PHY performs PCS encoding/decoding, PMA serialization, and analog front-end (AFE) processing across 10BASE-T, 100BASE-TX, and 1000BASE-T link speeds, providing auto-negotiation, echo cancellation, and cross-talk mitigation. Inside the broader system hierarchy, the PHY sits between the MAC (typically inside an SoC or Ethernet switch) and the magnetic/transformer+RJ-45 connector, forming the lowest layer of the wired Ethernet stack. Key features of the VSC8531XMW-02 include 10/100/1000 Mbps tri-speed operation, RGMII and RMII MAC-side interfaces, Wake-on-LAN (WoL) magic-packet power management, Energy-Efficient Ethernet (EEE) per IEEE 802.3az, and Microsemi EcoEthernet v2.0 dynamic power optimization that scales power consumption with cable reach and link state. The 48-QFN (6x6) package integrates the analog front-end and digital core in a small thermal footprint suitable for compact board layouts. The device's hardware-configurable modes of operation, set by sampling output pins on the rising edge of reset, allow designers to select MII/RGMII/RMII modes, PHY address, and other system options without software intervention. Combined with its Wake-on-LAN support, the VSC8531XMW-02 is well suited for always-on networked embedded systems that need to balance deterministic latency with aggressive power savings. Typical applications include industrial Ethernet switches, factory automation controllers, IP cameras and surveillance equipment, network interface cards on embedded motherboards, small-form-factor routers and gateways, and IoT edge gateways requiring a 1 Gbps copper uplink. Its small 6x6 mm package is attractive for products where PCB real estate is at a premium. When designing with the VSC8531XMW-02, allocate adequate copper ground planes beneath the QFN thermal pad and adhere to the manufacturer's reference design magnetics recommendation. Ensure the MII/RGMII bus traces are length-matched within the skew budget specified by the datasheet to avoid marginal timing at 1 Gbps operation.

RFQ צור קשר
VSC8531XMW-03 - 1G Ethernet PHY | Microchip | 48-QFN
VSC8531XMW-03

VSC8531XMW-03 - 1G Ethernet PHY | Microchip | 48-QFN

The Microchip Technology VSC8531XMW-03 is a single-port copper Ethernet PHY supporting 10 Mbps, 100 Mbps, and 1 Gbps operation, with 0.95 V and 2.38 V operating rails, in a 48-pin 6 mm × 6 mm QFN package. It is designed for compact network equipment and provides IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, SyncE, and RGMII/RMII interface support. A copper Ethernet PHY is a physical-layer interface IC that converts digital data into signals suitable for twisted-pair cabling and converts received cable signals back into digital data. Within the network architecture, it sits between a MAC or Ethernet controller and a network transformer or integrated copper interface. The VSC8531 combines that physical-layer function with energy-management and clocking features intended to reduce power use and support synchronization in network systems. The principal feature set includes one 10/100/1000BASE-T Ethernet channel, IEEE 802.3az EEE, Wake-on-LAN, synchronous Ethernet support, and broad LVCMOS I/O compatibility. These capabilities suit access equipment, industrial Ethernet endpoints, embedded gateways, and network infrastructure where board area is constrained. The 48-QFN package measures 6 mm on each side and includes an exposed pad according to the product description. The device separates digital and analog supply domains, with the listing identifying 0.95 V and 2.38 V operating voltages. That arrangement allows a PHY to operate alongside modern digital logic while using a dedicated supply for its analog circuitry. Its RGMII and RMII options let the same PHY family address processors with different parallel Ethernet interfaces, while SyncE support benefits designs that require deterministic timing across the network. Typical deployments include compact network switches, industrial controllers, telecom access equipment, and embedded communications systems. In these systems, the PHY connects a digital MAC or processor to the copper network medium, allowing standard 10/100/1000-Mbps Ethernet connectivity without requiring a larger discrete transceiver arrangement. Designers should use the manufacturer datasheet pin-description table when assigning every signal, especially the exposed pad, clock interface, power rails, and high-speed copper-side connections. Layout should follow the manufacturer’s recommended decoupling and magnetics-coupling guidance, with controlled differential routing and short return paths on the copper Ethernet side. This page organizes the verified product identity, interface capabilities, package details, sourcing information, drop-in alternatives, and engineering guidance into one procurement-oriented reference for engineers evaluating the VSC8531XMW-03.

RFQ צור קשר
VSC8531XMW-04 - 10/100 Ethernet PHY | Microchip
VSC8531XMW-04

VSC8531XMW-04 - 10/100 Ethernet PHY | Microchip

The Microchip Technology VSC8531XMW-04 is a single-port copper Ethernet physical-layer transceiver with IEEE 802.3az Energy Efficient Ethernet and Wake-on-LAN support. It is offered in a compact 48-QFN package measuring 6 mm by 6 mm for space-constrained network equipment. The device supports the widest range of I/O LVCMOS levels, making it suitable for bridging a standard 10/100 Ethernet MAC to a copper network medium through a conventional Ethernet transformer. An Ethernet physical-layer transceiver, or copper PHY, is the analog and digital interface between a network controller and twisted-pair cabling. It belongs to the broader network-interface hierarchy: Ethernet controller, Ethernet interface, network interface IC, and semiconductor. Unlike a media-access controller that processes higher-layer packets, a copper PHY handles line signaling, clock recovery, signal conditioning, auto-negotiation, and link establishment. Key device characteristics include support for IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN functionality, broad LVCMOS I/O support, and a single-row 48-QFN package. The 6 mm by 6 mm footprint saves board area compared with larger Ethernet PHY packages while retaining support for common 10/100 Ethernet interfaces. The VSC8531 family is specifically positioned for low-power, small-form-factor designs where board space is constrained. The -04 ordering suffix identifies the exact configuration offered under VSC8531XMW-04. Device-specific operating details, including exact speed options, transceiver media interfaces, voltage rails, temperature range, and clock requirements, should be confirmed against the manufacturer datasheet before schematic capture or PCB release. This distinction is important because similarly named VSC8531 order codes may differ in temperature grade, configuration, or production attributes while retaining the family-level package description. Typical applications include compact industrial Ethernet terminals, access-point equipment, embedded network controllers, print servers, set-top equipment, and other products that need a 10/100 copper Ethernet connection without allocating a large board footprint. The low-power and small-package positioning also makes the family suitable for space-sensitive consumer and communications equipment. Wake-on-LAN can support remote network wake-up functions, while Energy Efficient Ethernet can reduce link energy use when traffic is light. PCB design should reserve the complete 48-QFN land pattern, confirm the exposed-pad connection and thermal strategy, and place the PHY close to the Ethernet transformer or connector. Differential pairs should be routed as controlled-impedance nets with minimal stubs and symmetry. Decoupling and clock networks must follow the manufacturer’s recommended reference layout because an Ethernet PHY’s margin depends on clean power, low-noise clocks, and controlled magnetics-to-PHY signal integrity. This product page consolidates the manufacturer’s VSC8531 positioning, package information, and sourcing details with practical interface and layout guidance. It also identifies where engineers must consult the exact VSC8531XMW-04 datasheet for revision-specific electrical limits, pin assignments, ordering information, and design checklists.

RFQ צור קשר
VSC8531XMW-05 - 1-Port GbE Cu PHY, RGMII/RMII, 48-QFN | Microchip
VSC8531XMW-05

VSC8531XMW-05 - 1-Port GbE Cu PHY, RGMII/RMII, 48-QFN | Microchip

The Microchip VSC8531XMW-05 is a single-port Gigabit Ethernet copper PHY transceiver with RGMII/RMII MAC interface, housed in a 48-pin QFN (6 mm x 6 mm) package. Designed for industrial temperature applications, it supports 10/100/1000BASE-T operation on Category 5e twisted-pair cable and integrates IEEE 802.3az Energy Efficient Ethernet (EEE) plus Wake-on-LAN (WoL) for power-conscious networked devices. The device operates from a single 3.3 V supply with on-chip 1.0 V/1.2 V LDO regulators for its analog and digital cores. What is an Ethernet PHY? A PHY (physical layer transceiver) is the lowest layer of the OSI model, sitting between the MAC controller and the copper or fiber physical medium. Its job is to encode/decode packets using NRZ/PAM-2 signaling, perform line termination, equalization, and link training so that the upper-layer MAC receives serial data at the configured rate. In the system hierarchy, PHY -> transceiver -> LAN controller -> network interface -> embedded connectivity. The VSC8531 family is positioned for small-form-factor, low-power industrial Ethernet endpoints such as IP cameras, industrial sensors, and serial-server gateways. Key features include built-in PHY diagnostics (cable diagnostics with TDR-style fault detection), SyncE timing support, HP Auto-MDIX for automatic crossover, and the widest LVCMOS I/O voltage support in its class. Hardware configuration is via strapping pins and MDIO/MDC management interface, allowing port rate, duplex, and EEE behavior to be set without firmware. The 48-QFN package exposes a dedicated reference-clock input for Synchronous Ethernet (SyncE) applications. Architecturally, the VSC8531 uses an analog front-end with DSP-based adaptive equalization, an integrated 10/100/1000BASE-T line driver, and a digital loopback test path. The device achieves sub-700 mW power consumption at 1 Gbps full duplex and drops to roughly 150 mW in EEE low-power idle mode, making it attractive for thermally constrained and PoE-powered designs. Typical applications include industrial IoT gateways, factory-floor Ethernet nodes, IP surveillance cameras, building-automation controllers, and small-cell/femtocell baseband backhaul boards. It is also widely used in industrial sensor hubs and serial-to-Ethernet bridges where compact, low-power copper connectivity is required. When designing with this part, pay close attention to PCB stack-up: the analog supplies (VDDAxx) require star-grounding and bulk decoupling within 3 mm of each pin. Magnetics selection (1 G capable, 2000 Vrms isolation) and the 100 ohm differential pair routing must follow IEEE 802.3 return-loss masks. Use the MDIO interface to debug link-up issues rather than relying on strap defaults. This page synthesizes distributor pricing, drop-in alternatives, and practical layout notes that are not consolidated in the manufacturer datasheet, helping engineers shorten evaluation cycles and reduce PCB re-spin risk.

RFQ צור קשר
VSC8538XHJ - Octal-Port Gigabit Ethernet PHY | Microchip
VSC8538XHJ

VSC8538XHJ - Octal-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8538XHJ is an octal-port 10/100/1000BASE-T Ethernet physical-layer transceiver in a 444-pin HS-BGA package with an exposed pad. It combines eight Gigabit Ethernet PHY channels, integrated line-side termination, and a patented low-EMI line driver in a 27 mm package. The device supports 1.8 V, 2.5 V, and 3.3 V supply options and consumes 650 mW per port in 1000BASE-T mode. A physical-layer transceiver, or PHY, is the interface between a digital network controller and twisted-pair copper cabling. The PHY performs line encoding, signal shaping, clock recovery, and analog termination while the upper network controller handles packet processing. Within the network interface hierarchy, the VSC8538XHJ sits below the MAC layer and above the physical copper medium, making it suitable for multi-port Ethernet aggregation, access equipment, and industrial switching systems. The principal feature of the VSC8538XHJ is its octal-port configuration, which integrates eight Gigabit Ethernet channels into one package. The integrated line-side termination removes the need for separate external termination networks on each copper pair, while the patented low-EMI driver is intended to reduce electromagnetic emissions. These features support dense designs where board area, cable-channel count, and EMI performance are important constraints. The operating supply options of 1.8 V, 2.5 V, and 3.3 V allow the PHY to operate alongside processors, FPGAs, and switching silicon that use different core or I/O voltage levels. Its specified 650 mW consumption in 1000BASE-T mode is a critical thermal figure for multi-port deployments because eight active channels can create substantial aggregate heat in a compact system. Typical uses include eight-port Gigabit Ethernet switches, network interface controllers, routers, industrial Ethernet equipment, test equipment, and access-aggregation hardware. The 444-HSBGA package provides high pin density for parallel data, clock, control, and power connections, but it also requires careful PCB layout, via-in-pad construction, and thermal management. For PCB design, use the manufacturer datasheet pin-description table and layout guidance when assigning tracks and thermal vias. Place decoupling capacitors close to the supply pins, provide a low-impedance ground reference, and preserve the high-speed differential routing geometry recommended for 1000BASE-T channels. This page consolidates package, power, interface, and application information with a parameter-level comparison against related Vitesse and Microsemi Ethernet PHYs. It also identifies the thermal, EMI, and layout considerations that determine whether the octal-port architecture is preferable to fewer discrete PHY channels.

RFQ צור קשר
VSC8540XMV-03 - 1-Port Cu PHY | Microchip Technology
VSC8540XMV-03

VSC8540XMV-03 - 1-Port Cu PHY | Microchip Technology

The Microchip Technology VSC8540XMV-03 is a single-port copper Ethernet PHY with integrated IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, Synchronous Ethernet, and FLF2 indication. It is packaged in a 68-pin QFN measuring 8 mm by 8 mm and is designed for space-constrained 10BASE-TX and EtherCAT applications. The device supports RGMII, MII, and related serial interfaces indicated by the manufacturer product information. A copper Ethernet PHY is a physical-layer transceiver that converts digital Ethernet data into signals suitable for transmission over twisted-pair cabling. In the network hierarchy, a PHY operates below the Ethernet MAC and above the physical cable. Its primary functions include line signaling, link negotiation, clock recovery, and recovery from impaired copper links. The VSC8540XMV-03 places these functions in a compact surface-mount package for embedded network equipment. The VSC8540XMV-03 provides Energy Efficient Ethernet and Wake-on-LAN support, allowing compatible systems to reduce link power when appropriate and preserve network activity during low-power operating states. Synchronous Ethernet support provides a mechanism for maintaining timing relationships in synchronous network architectures. FLF2 indication supplies a fault-related status function for systems that monitor link behavior. These features make the PHY applicable to industrial Ethernet, communications equipment, and embedded EtherCAT designs. The 8 mm by 8 mm single-row QFN package reduces PCB footprint compared with larger Ethernet transceivers. Its RGMII implementation is identified as compliant with RGMII version 2.0 timing compensation, eliminating the need for separate on-board delay lines in applicable designs. The manufacturer also highlights integrated line-side termination, which can conserve board space, lower electromagnetic interference, and improve system performance when the termination arrangement is implemented as specified. Typical uses include 10BASE-TX and EtherCAT equipment, compact industrial network interfaces, and communications systems requiring Wake-on-LAN or Energy Efficient Ethernet. The device can also support Synchronous Ethernet designs where the host and line timing architecture are compatible. The manufacturer product page identifies the VSC8540 family as a low-power, small-form-factor copper PHY intended for space-constrained applications. A key design consideration is signal integrity. Place the PHY, magnetic-interface network components, supply bypassing, clock sources, and high-speed digital interfaces according to the manufacturer reference design. Keep copper traces controlled and minimize discontinuities between the PHY and network connector because Ethernet margins can depend on trace geometry, component placement, and the integrity of the external magnetics. This page combines the manufacturer product description, package information, interface features, sourcing guidance, and practical implementation considerations in one engineering-focused reference. It also distinguishes the VSC8540XMV-03 from related family members and highlights the parameters that must be checked before PCB reuse or substitution.

RFQ צור קשר
VSC8540XMV-04 - 10/100M Cu PHY | Microchip | Ethernet
VSC8540XMV-04

VSC8540XMV-04 - 10/100M Cu PHY | Microchip | Ethernet

Microchip VSC8540XMV-04 is a single-port copper Ethernet PHY designed for space-constrained 10BASE-TX and EtherCAT equipment, with 100 Mbps operation, dual 0.95 V and 2.38 V supply domains, and a 68-QFN 8 mm × 8 mm package. The device also provides Energy Efficient Ethernet, Wake-on-LAN, Synchronous Ethernet, and FLF2 indication, making it suitable for compact industrial and telecom interfaces. A copper PHY, or physical-layer transceiver, is the integrated circuit that translates logical Ethernet data into signals suitable for twisted-pair cabling. In the hierarchy of network semiconductors, a PHY operates below the Ethernet media-access controller: the MAC organizes frames and protocol access, while the PHY manages the physical signaling, line coding, auto-negotiation, and cable connection. The VSC8540XMV-04 therefore belongs to the Ethernet interface and physical-layer transceiver segment of the broader semiconductor market. The headline capabilities of this device are its single 10/100 Mbps copper channel, 0.95 V and 2.38 V operating rails, and 68-QFN package. Its 10BASE-TX support targets 10 Mbps legacy networks, while 100BASE-TX operation supports Fast Ethernet links. Energy Efficient Ethernet can reduce power consumption when link traffic is low, and Wake-on-LAN allows a connected system to respond when an appropriate network wake event occurs. Technical integration centers on the combination of low-power PHY operation, Synchronous Ethernet support, FLF2 status indication, and a compact exposed-pad package. Synchronous Ethernet can help maintain synchronized timing for demanding network equipment, while FLF2 indication provides a hardware status signal for link-fault monitoring. The manufacturer datasheet also identifies compatibility with systems that supply power through the MDI or twisted-pair cable under IEEE 802.3af Clause 33, an important consideration for powered-device designs. Typical uses include industrial Ethernet controllers, EtherCAT equipment, compact network appliances, telecom equipment, and compact communications systems. Its small 8 mm × 8 mm footprint supports designs where board area is limited, while the feature set helps reduce the need for separate link-management or timing circuitry. System designers should still validate magnetics, termination, power sequencing, thermal performance, and signal-integrity margins against the target network environment. For PCB implementation, follow the manufacturer’s exposed-pad land pattern, thermal-via, and layout guidance. Keep the PHY supply and ground connections compact, provide the specified bypass capacitance at the device pins, and route high-speed copper PHY signals with continuous references and controlled impedance. Treat the exposed pad as both an electrical connection and a thermal path rather than treating it as an optional ground feature. This product page organizes the manufacturer’s Ethernet PHY information, package details, sourcing path, replacement analysis, and engineering guidance into one practical reference. It highlights how the VSC8540XMV-04 fits compact copper-networking designs while directing engineers to the manufacturer documentation for complete pin assignments, timing limits, magnetic-component recommendations, and layout constraints.

RFQ צור קשר
VSC8541XMV - Gigabit Ethernet Copper PHY | Microchip
VSC8541XMV

VSC8541XMV - Gigabit Ethernet Copper PHY | Microchip

The Microchip Technology VSC8541XMV is a low-power, small-form-factor single-port Gigabit Ethernet copper PHY supporting 10/100/1000BASE-T communication in a 68-pin QFN package measuring 8 x 8 mm. It supports GMII, RGMII, MII, and RMII interfaces, with EEE, Wake-on-LAN, and Synchronous Ethernet capabilities for space-constrained networking equipment. A copper PHY is the physical-layer interface between a network switch, router, control system, or other digital controller and a twisted-pair Ethernet cable. Within the semiconductor hierarchy, the VSC8541XMV belongs to the Ethernet transceiver and interface-controller family, with broader application in industrial communication, access equipment, embedded systems, and 10/100/1000BASE-T network interfaces. Key features include support for all three Gigabit Ethernet copper rates, Energy Efficient Ethernet, Wake-on-LAN, and Synchronous Ethernet. Synchronous Ethernet is especially useful in carrier and timing-sensitive infrastructure because it allows Ethernet traffic to be referenced to a common clock. The four supported MAC-facing interfaces provide flexibility when connecting the PHY to processors, switches, routers, or custom Ethernet controllers. The VSC8541 device architecture is intended for compact, low-power Ethernet designs where board area is constrained. Its 8 x 8 mm QFN-68 construction supports high-density placement, while the RGMII and RMII options can simplify connections to systems with different parallel-interface requirements. GMII and MII provide additional options for designs using higher-speed or legacy parallel Ethernet interfaces. Typical applications include industrial Ethernet gateways, routers, switches, network interface cards, telecommunications access equipment, embedded Linux platforms, and copper backplane links. EEE can reduce power consumption when link activity is low, while Wake-on-LAN supports remote activation and network management. Synchronous Ethernet is useful in infrastructure requiring deterministic clock distribution across packet-processing equipment. When laying out a PCB, follow the Microchip VSC8541 Hardware Design Checklist for high-speed trace routing, supply decoupling, magnetic-component placement, and return-path continuity. Pay particular attention to impedance-controlled differential pairs, component-loop area, and grounding around the exposed thermal pad. The exact pin assignments and layer-specific layout guidance should be taken from the manufacturer datasheet corresponding to the ordered suffix. This product overview combines the confirmed VSC8541 family capabilities, package information, interface options, and hardware-design guidance with practical guidance for Ethernet PCB implementation. It also distinguishes the documented ordering variants that can be evaluated when an existing VSC8541XMV design requires a replacement.

RFQ צור קשר
VSC8541XMV-01 - Gigabit Ethernet PHY | Microchip Technology
VSC8541XMV-01

VSC8541XMV-01 - Gigabit Ethernet PHY | Microchip Technology

Microchip Technology VSC8541XMV-01 is a low-power, single-port Gigabit Ethernet copper PHY supporting 10/100/1000BASE-T in a 68-QFN 8 x 8 mm surface-mount package. The device provides EEE, Wake-on-LAN, Synchronous Ethernet, integrated line-side termination, and configurable GMII, RGMII, MII, and RMII interfaces for compact network equipment. An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts logical digital data transmitted by a network controller into signals suitable for copper cabling. The VSC8541 belongs to the Gigabit Ethernet PHY hierarchy, where it sits between a MAC or other digital Ethernet controller and a transformer-coupled RJ45 network interface. Its single-port architecture targets space-constrained industrial, telecom, enterprise, and embedded systems while combining synchronization and energy-saving features in one mixed-signal device. The principal features include support for 10, 100, and 1000 Mb/s operation over copper, EEE for lower-power links, Wake-on-LAN, Synchronous Ethernet, and four parallel MAC-interface options. Integrated line-side termination conserves board area and can reduce electromagnetic-interference sensitivity by eliminating external termination components. RGMII timing compensation avoids external delay-line components in suitable interface designs. The family documentation also identifies compatibility with DTE power supplied through the MDI, as described in IEEE 802.3af Clause 33. The VSC8541 family is designed for systems where board area, power consumption, and network timing matter. Its range of supported MAC interfaces allows the same PHY family to serve equipment with different Ethernet controllers and legacy parallel interfaces. Synchronous Ethernet is useful when the network timing reference must remain aligned across multiple system functions, while EEE can reduce link energy use during periods of low traffic. Integrated termination and timing compensation further reduce the number of discrete components around the magnetics and MAC connection. Typical applications include industrial Ethernet switches, telecom terminal equipment, carrier infrastructure, industrial automation controllers, compact network appliances, and embedded communications equipment. The 68-QFN 8 x 8 mm package reduces footprint compared with larger leaded or high-pin-count implementations, while its exposed pad supports heat transfer from the device into the PCB copper plane. The VSC8541XMV-01 is supplied in trays and is specified for a 0°C to 125°C operating-temperature range. Hardware implementation should follow the VSC8541 Hardware Design Checklist and the VSC8541 Evaluation Board User Guide. Keep the PHY-to-magnetics and PHY-to-MAC paths short, provide continuous ground-plane return paths, and observe the layout and decoupling recommendations for the selected interface mode. The exposed pad requires a deliberate thermal and electrical pad-connection strategy rather than being left as an isolated thermal-only feature. This product page combines the verified VSC8541 family capabilities, package and ordering information, interface details, related orderable variants, and implementation guidance into a design-focused reference. It also identifies the limits of drop-in sourcing: only candidates with a confirmed 68-QFN footprint and compatible pin arrangement are presented as alternatives.

RFQ צור קשר
VSC8541XMV-03 - Gigabit Ethernet Copper PHY | Microchip
VSC8541XMV-03

VSC8541XMV-03 - Gigabit Ethernet Copper PHY | Microchip

Microchip Technology VSC8541XMV-03 is a single-port Gigabit Ethernet copper PHY with EEE, Wake-on-LAN, and Synchronous Ethernet support. It supports 10/100/1000BASE-T operation and is packaged in a 68-pin, 8 mm x 8 mm QFN package. The device is intended for space-constrained Ethernet equipment requiring a compact interface between a network transformer or magnetics and the host digital electronics. An Ethernet copper PHY is an interface integrated circuit that translates digital Ethernet symbols into physical signaling for twisted-pair cables. Within the network interface hierarchy, the PHY connects the MAC and media-access-control logic to a 10/100/1000BASE-T physical layer. The VSC8541 family supports reduced-power operation and energy-efficient Ethernet, helping embedded and communications equipment lower power consumption when traffic demand is low. The VSC8541 combines a 1 Gb/s copper-channel capability with RGMII, RMII, and MII-style host interfaces identified by the manufacturer documentation. Synchronous Ethernet support is valuable in telecom and industrial systems where the physical clock must remain aligned with a common timing reference. Wake-on-LAN enables a system to react to designated network activity while most other functions are placed into a low-power state. The device uses an 8 mm x 8 mm QFN package, providing a comparatively compact solution for single-port designs. Its single-port architecture avoids the component count of a multi-port PHY solution. The exact pin assignments, clocking requirements, transceiver limits, operating-temperature grade, and recommended magnetics must be confirmed in the VSC8541 manufacturer datasheet before schematic release. The hardware design checklist also emphasizes first-pass design considerations for this device family. Typical installations include industrial Ethernet switches, telecom access equipment, embedded network controllers, serial-server platforms, and compact gateways. In each case, the PHY reduces the amount of physical-layer circuitry required at the board edge. The 68-pin QFN package also requires a land pattern capable of routing high-speed digital interfaces and supplying clean power to the copper transceiver. For a new layout, place the PHY close to the Ethernet connector and magnetics, and keep the digital host-interface section away from the copper-channel circuitry. Follow the manufacturer’s high-speed trace, via, decoupling, and return-path guidance. Validate magnetics selection, center-tap termination, isolation requirements, and cable reach before releasing production hardware. This page combines the manufacturer’s product positioning with package details, application guidance, drop-in ordering alternatives, and hardware design considerations. It is intended to help engineers identify the correct VSC8541 ordering code and plan a robust copper-Ethernet implementation without treating unreleased parameter data as a substitute for the datasheet.

RFQ צור קשר
VSC8541XMV-04 Single-Port Gigabit Cu PHY | Microchip
VSC8541XMV-04

VSC8541XMV-04 Single-Port Gigabit Cu PHY | Microchip

The Microchip VSC8541XMV-04 is a single-port, low-power copper Ethernet PHY designed for space-constrained 10/100/1000BASE-T equipment, with support for Energy Efficient Ethernet, Wake-on-LAN, and Synchronous Ethernet. It is packaged in a 68-pin QFN measuring 8 mm by 8 mm and provides GMII, RGMII, MII, and RMII interfaces. A copper PHY, or physical-layer transceiver, is the circuit that converts logical Ethernet data into signals suitable for transmission over twisted-pair cabling. Within the network hierarchy, the VSC8541XMV-04 is an Ethernet interface IC that connects a digital network processor, switch, router, or other host controller to a 10/100/1000BASE-T copper network. Its multiple interface options allow it to address systems with different clocking, data-width, and board-layout requirements. The device combines Gigabit-class network connectivity with low-power operation and a compact 68-QFN package. Energy Efficient Ethernet can reduce link power when the traffic load permits it, while Wake-on-LAN supports remotely waking compatible networked equipment. Synchronous Ethernet provides a mechanism for transferring timing information over Ethernet links, making the PHY relevant to infrastructure equipment that requires synchronization. The available GMII, RGMII, MII, and RMII interfaces are important selection criteria because they determine how the PHY connects to the host controller. GMII and RGMII support parallel Ethernet signaling, while MII and RMII are commonly associated with lower-speed or lower-pin-count implementations. The exact clocking, voltage, timing, and pin-level requirements should be verified against the manufacturer datasheet and hardware design checklist before layout is released. Typical uses include industrial Ethernet gateways, compact network switches, routers, telecommunications access equipment, set-top hardware, and embedded systems that require a single copper Ethernet port. Its 8 mm by 8 mm footprint saves board area compared with larger multi-port PHYs, while EEE and WoL features can improve power management and remote-access behavior. PCB implementation requires careful attention to high-speed digital routing, clock integrity, copper media interface layout, and power and ground distribution. Follow the VSC8541 Hardware Design Checklist for recommended component placement, magnetics-interface geometry, decoupling, and signal-integrity practices. Confirm the selected transformer, line-side filtering, and board stack-up against the applicable channel requirements. This product page combines the manufacturer feature description, package information, ordering-code comparisons, and practical implementation guidance. It also organizes same-family drop-in candidates and identifies which parameters still require confirmation from the individual device datasheet, helping engineers narrow a hardware revision or sourcing decision before completing a first-pass design.

RFQ צור קשר
VSC8552XKS-01 - Dual-Port Gigabit Ethernet PHY | Microchip
VSC8552XKS-01

VSC8552XKS-01 - Dual-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8552XKS-01 is a dual-port Gigabit Ethernet physical-layer transceiver supporting copper and fiber media in a 256-pin PBGA package measuring 17 mm by 17 mm. It combines two Gigabit Ethernet ports, configurable receive and transmit GMII interfaces, IEEE 802.3az Energy Efficient Ethernet, and recovered-clock functions for synchronous Ethernet designs. The device operates from a 1 V core supply according to its product listing. A Gigabit Ethernet PHY is the physical-layer component that converts digital MAC-layer data into electrical or optical signaling and recovers data from the medium. In the broader hierarchy, the VSC8552 belongs to Ethernet interface integrated circuits, network interface controllers, and communication semiconductors. Its dual-media architecture allows one PHY to support both copper and optical network paths when paired with suitable magnetics, optics, clocking, and system circuitry. Key features include support for 1000BASE-T copper and fiber media, IEEE 802.3az Energy Efficient Ethernet, dual recovered-clock outputs, programmable clock-squelch control, and ring-resiliency operation. The recovered clocks support Synchronous Ethernet applications, while clock squelch helps prevent unwanted clock propagation and timing loops. These features suit carrier equipment, enterprise networking, data-center links, industrial systems, and consumer gateways. The VSC8552 family provides a high level of integration for two-port designs. Supporting both copper and fiber media can simplify common control-plane and digital backplane logic across mixed network interfaces. The manufacturer also documents transitions among the VSC8504, VSC8552, VSC8572, and VSC8574 families, but replacement feasibility must be confirmed against the device pin list, media configuration, clocks, power design, and software configuration. Typical deployments include dual-port copper switches, fiber-to-copper network gateways, telecom access equipment, industrial Ethernet controllers, and Synchronous Ethernet equipment. The 256-pin PBGA requires careful high-density PCB layout, controlled-reference-voltage and clock routing, and a multilayer power-delivery network. Because this package exposes many power, ground, signal, and configuration pins, designers should use the manufacturer's pin-description table and recommended reference design rather than infer connectivity from the 17 mm square outline. For a new design, the main engineering trade-off is integration against board complexity. Two integrated ports and recovered-clock outputs reduce external active component count, while the large BGA footprint demands fine-pitch assembly, adequate via-in-pad or via-beneath-pad structures, and careful return-path design. Existing VSC8552 hardware should not be assumed to accept another family member without a board and firmware review; Microchip specifically notes that the VSC8562 is not pin-for-pin compatible with the VSC8552. This product page organizes the confirmed Ethernet, media, package, clocking, and power characteristics into an engineering-oriented selection reference. It also identifies the compatible family suffix documented for the same 256-pin PBGA footprint and highlights the board-level checks that engineers must complete before approving a substitution, firmware reuse, or second-source transition.

RFQ צור קשר
VSC8552XKS-04 - Dual-Port Gigabit Ethernet PHY | Microchip
VSC8552XKS-04

VSC8552XKS-04 - Dual-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8552XKS-04 is a dual-port Gigabit Ethernet physical-layer transceiver with a nominal 1 V supply, designed for automotive networking equipment and other space-constrained Ethernet systems. It is packaged in a 256-terminal PBGA measuring 17 mm by 17 mm and is specified for a -40 °C to +125 °C temperature range. The dual-port configuration integrates two Gigabit Ethernet PHYs in one high-density surface-mount package, reducing the component count required for dual-port network equipment. A Gigabit Ethernet PHY is a physical-layer transceiver that converts digital data into electrical signals for transmission over copper cabling and reconstructs received signals for the associated media-access controller. Within the Ethernet hierarchy, a PHY sits below the MAC layer and above the physical cable interface. The VSC8552 therefore belongs to the interface-IC and network-interface categories rather than the processor or switching-controller categories. Its two independent Gigabit Ethernet ports support equipment that requires two physical network connections within one device. The principal published features of the VSC8552 include dual-port Gigabit Ethernet operation and EcoEthernet IEEE 802.3az Energy Efficient Ethernet technology. IEEE 802.3az allows a compliant link to reduce power consumption when network traffic is light. A nominal 1 V core supply supports integration into modern high-speed digital equipment, while the automotive-grade temperature range allows operation from -40 °C to +125 °C in demanding environmental conditions. The 256-PBGA package provides 256 bottom-side terminals on a 17 mm by 17 mm square body. This dense land pattern can reduce board footprint but requires careful escape routing, via planning, and power-distribution design. Because the package combines two PHYs and a high pin count, PCB signal-integrity and thermal performance depend heavily on layer count, return paths, via geometry, and layout symmetry. The nominal 1 V supply should be distributed through low-impedance power and ground planes rather than narrow traces. Typical uses include automotive Ethernet gateways, vehicle network interfaces, industrial communication equipment, dual-port embedded systems, and access-network equipment. The dual-port architecture is particularly useful when one product must offer two copper Ethernet connections without using two separate PHY packages. The manufacturer identifies enterprise networks, data centers, and consumer electronics as VSC8552 application areas, while the automotive-temperature version is suited to vehicle electronics and other extended-temperature systems. The primary design consideration is that a valid replacement must match the 256-terminal PBGA footprint, ball map, supply requirements, clocking, register behavior, and Ethernet application requirements. The VSC8552XKS-05 is identified as an alternative catalog part in the same 17 mm by 17 mm 256-PBGA format, but firmware, feature, and lifecycle differences still need confirmation before it is treated as an unconditional production substitute. This page combines the manufacturer positioning, package and environmental characteristics, drop-in candidate review, comparison data, and practical design considerations into an engineering-oriented overview of the VSC8552XKS-04.

RFQ צור קשר
VSC8562XKS-14 - Dual-Port GbE PHY | Microchip | Ethernet
VSC8562XKS-14

VSC8562XKS-14 - Dual-Port GbE PHY | Microchip | Ethernet

The Microchip Technology VSC8562XKS-14 is a dual-port Gigabit Ethernet physical-layer transceiver supporting copper and fiber connectivity, with QSGMII and MACsec capability in a 256-pin PBGA package measuring 17 x 17 mm. The industrial-temperature ordering code identifies this configuration for equipment operating across industrial network environments. A Gigabit Ethernet PHY is the physical-layer component that converts digital data into electrical or optical signaling for a Gigabit Ethernet link. Within a network interface hierarchy, the PHY connects a digital Ethernet controller or switch to copper or fiber media. The VSC8562 integrates two Gigabit Ethernet ports, providing a compact multi-port solution for enterprise switching, industrial communication, cloud infrastructure, smart-grid equipment, video systems, and secure government or enterprise networks. The device combines dual copper or fiber ports with QSGMII connectivity and MACsec support. QSGMII provides a high-speed serial interface between a PHY and a switching or processing device. MACsec capabilities support hardware-assisted protection of Ethernet traffic at layer 2. Together, these functions target designs that require two Gigabit Ethernet links, efficient serial interconnection, and integrated traffic-security capability within one device. The VSC8562 uses Microchip's Intellisec technology for securing cloud-network applications. This positioning is significant because enterprise, government, database, collaboration, smart-grid, and industrial systems may require Ethernet security without implementing every protected link through discrete components. Integrating two PHY ports in one package also reduces board-level PHY count compared with separate single-port devices, although a complete design still requires careful power, clock, signal-integrity, and thermal implementation. Typical installations include access-switch line cards, industrial Ethernet gateways, network-interface modules, video infrastructure, smart-grid controllers, and cloud-network appliances. Each port can support copper or fiber connectivity according to the implementation and external network interface requirements. Product selection should be confirmed against the manufacturer datasheet for supported media, electrical characteristics, clocking, firmware configuration, refclk requirements, and PCB layout constraints. The main design consideration is that this highly integrated transceiver still requires a carefully engineered PCB. Differential Ethernet pairs, high-speed serial QSGMII links, reference clocks, power rails, decoupling networks, and the exposed-package thermal path must be routed according to the manufacturer's recommended layout. Differential pair geometry and return paths are especially important because incorrect impedance or coupling can reduce signal integrity despite correct logical configuration. This product page consolidates the verified ordering information, functional identity, package format, sourcing guidance, and design-focused context for the VSC8562XKS-14. It also distinguishes confirmed characteristics from parameters that require confirmation in the Microchip datasheet, helping engineers plan the PCB, power architecture, media interfaces, and compliance work before releasing a production design.

RFQ צור קשר
VSC8564XKS-11 - 4-Port GbE Cu/Fiber PHY | Microchip Technology
VSC8564XKS-11

VSC8564XKS-11 - 4-Port GbE Cu/Fiber PHY | Microchip Technology

The Microchip Technology VSC8564XKS-11 is a four-port Gigabit Ethernet PHY supporting copper or fiber connections, (Q)SGMII interfaces, and MACsec security in a 256-ball PBGA package measuring 17 x 17 mm. It combines four Gigabit Ethernet ports with hardware-assisted network security functions for equipment requiring secure network connectivity. A Gigabit Ethernet physical-layer transceiver, commonly called a GbE PHY, converts digital data into signals suitable for transmission over twisted-pair copper or optical media while receiving and recovering incoming signals. The PHY operates within the wider network-interface hierarchy of Ethernet controller, MAC, PHY, line driver, connector, and network medium. Integrating four ports in one package reduces the component count and board area required by multiport network equipment. The VSC8564 family supports copper and fiber connectivity, allowing one design platform to serve different media requirements. Its (Q)SGMII interface connects the PHY layer to a network processor or Ethernet switch through a high-speed serial link, while MACsec capability provides a mechanism for protecting Ethernet frames with hardware-based encryption and integrity protection. Microchip positions the device for cloud, database, collaboration, smart-grid, video, enterprise, government, and communications applications. The XKS-11 ordering code corresponds to the 256-PBGA, 17 x 17 mm package identified for this part. Such a large, fine-pitch package supports dense integration but requires careful PCB layout, power delivery, thermal management, and ball-by-ball inspection. Its exact electrical ratings, supported media configurations, clocking requirements, operating-temperature range, and power-consumption limits must be confirmed in the manufacturer datasheet before schematic release or production qualification. Typical uses include secure industrial gateways, enterprise network appliances, cloud-network equipment, smart-grid equipment, video systems, and other multiport Ethernet products. A four-port PHY is especially useful where one board must expose several copper ports or combine copper and optical network interfaces without using four separate single-port PHY devices. Layout planning should prioritize the high-speed (Q)SGMII connections, Ethernet magnetics interfaces, clock sources, decoupling networks, and exposed-package thermal management. Keep sensitive differential and clock routes short, reference a continuous ground plane, and follow the manufacturer's reference layout and component-placement guidance to control impedance, insertion loss, crosstalk, and electromagnetic interference. This page combines the manufacturer family description with package identification, application engineering guidance, sourcing pathways, and a structured comparison framework. Detailed pin assignments, electrical limits, media-specific configuration rules, and security implementation requirements should be taken directly from the Microchip VSC8564 documentation before schematic capture.

RFQ צור קשר
VSC8564XKS-14 4-Port GbE PHY | Microchip Technology
VSC8564XKS-14

VSC8564XKS-14 4-Port GbE PHY | Microchip Technology

The Microchip Technology VSC8564XKS-14 is a four-port Gigabit Ethernet interface IC with copper and fiber PHY support, QSGMII, and MACsec capability. It is configured for industrial-temperature operation and is packaged in a 256-pin PBGA measuring 17 mm by 17 mm. The device integrates four Gigabit Ethernet ports with serial interconnect and hardware security functions for communications equipment. An Ethernet interface IC is a semiconductor that connects an embedded system or communications processor to physical Ethernet networks. This device belongs to the Gigabit Ethernet controller and Ethernet transceiver hierarchy, combining physical-layer signaling, QSGMII-based port expansion, and MACsec support. Its 256-PBGA package provides a high pin count for four-port networking designs, power delivery, reference-clock connections, and high-speed serial interfaces. Key features include four Gigabit Ethernet ports, support for copper and fiber PHYs, QSGMII connectivity, and MACsec hardware acceleration. The industrial-temperature designation makes the device suitable for equipment expected to operate outside consumer-only temperature environments. Its 256-pin, 17 mm by 17 mm PBGA package is designed for multilayer PCB layouts, controlled impedance routing, and proper power and ground distribution beneath a dense component. The VSC8564 family uses a high-speed serial architecture to connect multiple Ethernet channels to a host processor or network controller. QSGMII provides a four-lane serial interface for parallel port aggregation, while MACsec support provides hardware assistance for protecting Ethernet traffic at line rate. Exact lane rates, protocol options, clock requirements, register details, and electrical characteristics should be confirmed in the manufacturer datasheet before schematic capture. Typical uses include industrial Ethernet switches, telecom access equipment, network appliances, fiber-to-copper media systems, and secure industrial gateways. In a four-port switch design, the device can provide PHY connectivity for multiple copper or fiber links while a host processor handles higher-layer switching and management functions. MACsec support is useful when equipment requires hardware-assisted link-layer encryption. PCB implementation requires careful attention to high-speed signal integrity, layer transitions, via symmetry, reference planes, and power delivery. Follow the Microchip layout guidance for the 256-PBGA footprint, preserve continuous ground references beneath the device, and use the recommended decoupling network at each supply input. Confirm all AC coupling, terminations, and clock connections against the applicable hardware design guidance. This page combines the exact product identity, source links, application engineering guidance, and verified drop-in compatibility information. Because detailed electrical tables and a public numbered pin list were not established, the unknown values are marked explicitly rather than inferred. Use the Microchip product page and device documentation for the final qualification, schematic, and layout release.

RFQ צור קשר
VSC8574XKS-02 - 4-Port Gigabit Ethernet PHY | Microchip
VSC8574XKS-02

VSC8574XKS-02 - 4-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8574XKS-02 is a quad-port Gigabit Ethernet PHY transceiver with copper and fiber connectivity, SGMII and QSGMII MAC interfaces, IEEE 1588 synchronization, and Ring Resiliency support. The device operates across 10/100/1000BASE-T links and is packaged in a surface-mount 256-ball PBGA measuring 17 x 17 mm. A Gigabit Ethernet physical-layer transceiver converts high-speed serial data into electrical signaling for copper media and optical signaling for fiber media. As a PHY, the VSC8574XKS-02 handles line coding, physical-layer encoding and decoding, clock recovery, link training, and the electrical interface between a network processor or switch ASIC and external transceivers. This four-port device consolidates multiple Ethernet channels into one package while supporting both conventional Gigabit Ethernet and QSGMII aggregation. Principal features include four Gigabit Ethernet ports, copper and fiber PHY operation, synchronized Ethernet, and IEEE 1588 precision timing through Microchip VeriTime technology. SGMII and QSGMII interfaces connect the PHY to a MAC through a high-speed serial link. Ring Resiliency provides a fault-tolerance mechanism for ring-based network topologies, reducing the operational impact of a broken link or inactive node. The -02 ordering designation identifies a specific Microchip configuration of the VSC8574 family. Configuration controls, supported features, and operating details should be confirmed against the VSC8574-02 manufacturer datasheet before schematic release. The PBGA-256 package requires a land pattern with dense, fine-pitch routing and careful power-plane integration, making high-layer-count board design, via-in-pad practice, and controlled-impedance layout central to a successful implementation. Typical deployments include enterprise access switches, telecom access equipment, industrial Ethernet gateways, network appliances, and carrier aggregation systems. Four integrated ports suit designs that need several copper links plus optical uplinks without distributing PHY functions across multiple devices. QSGMII reduces the number of high-speed serial connections to the host MAC when a wider aggregate fabric is required. For PCB implementation, treat each power rail as a separate distribution problem and place bulk and local decoupling capacitors close to the device supply pins. Keep the QSGMII and SGMII traces short, continuous, and impedance controlled, and avoid routing high-speed serial signals through noisy power or digital return paths. Differential pair geometry, reference-plane continuity, and via transitions should follow the layout guidance in the VSC8574 hardware design checklist.

RFQ צור קשר
VSC8574XKS-04 - 4-Port Gigabit Ethernet PHY | Microchip
VSC8574XKS-04

VSC8574XKS-04 - 4-Port Gigabit Ethernet PHY | Microchip

Microchip Technology VSC8574XKS-04 is a four-port Gigabit Ethernet PHY transceiver with SGMII and QSGMII MAC interfaces, packaged in a 256-pin PBGA measuring 17 mm by 17 mm. The device combines four Gigabit Ethernet physical-layer channels in one package and adds VeriTime IEEE 1588 timing support and Ring Resiliency technology for networking equipment requiring precise synchronization and resilient links. A Gigabit Ethernet PHY is the physical-layer component that converts between digital MAC-layer data and analog signals transmitted over copper cabling. Within the network hierarchy, the VSC8574 is an Ethernet transceiver, interface IC, and semiconductor. Its QSGMII interface supports aggregation of multiple lanes, while SGMII provides a serial gigabit interface between the PHY and a network MAC. This combination is suited to high-port-count switches, routers, telecom access equipment, industrial gateways, and server network interfaces. The primary features of the VSC8574XKS-04 include four Gigabit Ethernet ports, SGMII and QSGMII MAC-facing interfaces, VeriTime IEEE 1588 support, and Ring Resiliency capability. Ring Resiliency provides mechanisms for maintaining network operation when links or ring paths experience faults. IEEE 1588 timing support is particularly valuable in carrier-grade and industrial systems where synchronized clocks are required across packet-processing equipment. The VSC8574 family is implemented for high-performance communication systems and combines several physical-layer functions with serial MAC connectivity. The 256-pin PBGA package provides the necessary high-density connections for four channels, clocks, controls, and power delivery. Because the package has numerous power and high-speed signal pins, exact rail requirements, pin functions, clocking details, and electrical limits must be confirmed against the manufacturer datasheet and hardware design checklist before layout begins. Typical applications include multi-port Ethernet switches with four copper PHY channels, telecommunications aggregation equipment, industrial Ethernet networking, data-center networking, access-network infrastructure, and synchronized industrial control systems. The four integrated ports can reduce the number of discrete PHY devices needed in a line card while preserving a centralized MAC-facing QSGMII connection. PCB implementation should follow the manufacturer VSC8574 hardware design checklist. Keep local decoupling physically close to the appropriate power pins, minimize supply-path resistance, and use correctly positioned bulk and bypass capacitors. Differential and high-speed routing requires controlled impedance, short return paths, continuous reference planes, and careful separation between clocks, serial interfaces, and sensitive analog circuitry. This page combines manufacturer feature information, package details, application guidance, practical design considerations, and same-footprint replacement analysis. It is intended to help engineers identify whether the VSC8574XKS-04 fits a four-port Gigabit Ethernet design and to evaluate compatible family variants before committing a new hardware platform.

RFQ צור קשר
VSC8574XKS-10 - 4-Port Gigabit Ethernet PHY | Microchip
VSC8574XKS-10

VSC8574XKS-10 - 4-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8574XKS-10 is a four-port Gigabit Ethernet PHY transceiver with SGMII and QSGMII MAC interfaces, packaged in a 256-pin PBGA measuring 17 mm by 17 mm. It supports Gigabit Ethernet data rates, IEEE 1588 timing functions, and Ring Resiliency for carrier-network equipment requiring synchronized and resilient Ethernet links. A Gigabit Ethernet physical-layer transceiver is an interface IC that converts digital MAC data into electrical signaling for copper Ethernet connections. The VSC8574 belongs to the Ethernet interface hierarchy, where a multiport PHY supports several physical network ports while a host MAC supplies and receives packet data through a serial or quad-serial interface. Its four-port integration reduces component count in access switches, industrial gateways, telecom equipment, and network appliances. Key features include four Gigabit Ethernet ports, SGMII and QSGMII MAC connectivity, VeriTime IEEE 1588 support, and Ring Resiliency. SGMII provides a serial interface between the PHY and MAC, while QSGMII aggregates four lanes to support a quad-port network architecture. These interfaces let the device serve as the physical layer beneath a switching or aggregation ASIC. The manufacturer also identifies single-step and two-step IEEE 1588 timestamping, MPLS and Ethernet Y.1731 OAM support, and EcoEthernet 2.0 as part of the device feature set. The -10 ordering code identifies this configuration within the VSC8574 family, which is positioned for telecommunications and industrial networking applications. A 256-pin PBGA requires careful ball assignment and multilayer PCB construction because the high pin count supports multiple copper ports, clocks, control signals, data interfaces, and power distribution. Accurate high-speed routing, controlled impedance, local decoupling, and careful return-path continuity are central to achieving reliable operation. Typical uses include 10/100/1000Base-T access switches, industrial Ethernet gateways, telecom aggregation equipment, carrier Ethernet platforms, and synchronized networking systems. The four-port arrangement is particularly useful where each port must support Gigabit Ethernet while the system architecture uses QSGMII to connect the PHY bank to a central MAC or switching fabric. Ring Resiliency can improve service continuity in network topologies designed for rapid protection switching. Design the power network with separate filtering and decoupling strategies for the PHY, clocks, interfaces, and I/O. Keep bulk and local capacitors close to their associated supply pins, use continuous ground-plane references beneath high-speed links, and avoid stubs on clock and data nets. The Microchip VSC8574 Hardware Design Checklist provides guidance on bulk decoupling, ferrite-bead filtering, and supply distribution for this device family. This page consolidates the confirmed four-port Gigabit Ethernet functionality, package information, interface types, resilience features, sourcing workflow, and practical hardware considerations. It also organizes same-family drop-in alternatives and differentiates ordering variants without treating unrelated Ethernet PHYs as footprint-compatible replacements.

RFQ צור קשר