מוצרים (44,000+)

XC3S500E-4FG320I - 500K Gate Spartan-3E FPGA | AMD
XC3S500E-4FG320I

XC3S500E-4FG320I - 500K Gate Spartan-3E FPGA | AMD

The AMD XC3S500E-4FG320I is a Spartan-3E field-programmable gate array built for cost-sensitive digital systems, providing 500,000 equivalent system gates, 10,476 configurable logic cells, 368,640 RAM bits, and 232 user I/O in a 320-pin FBGA package. The -4 speed grade supports demanding control, interface, and signal-processing designs, while the 90 nm fabrication process targets high-volume consumer and embedded applications. An FPGA is a programmable digital semiconductor whose internal logic, interconnect, memory, and I/O blocks are configured after manufacture. Within the product hierarchy, the XC3S500E-4FG320I is a Spartan-3E FPGA, a member of the Spartan-3E family of programmable logic devices. Its advantage over a fixed-function mask-programmed ASIC is field programmability, allowing design revisions, shorter development cycles, and product differentiation without redesigning custom silicon. Key resources include 1,164 configurable logic blocks, 10,476 logic cells, 368,640 bits of block RAM, and 232 user I/O. The device is identified as operating with a 1.2 V supply and reaching 572 MHz under the stated operating conditions. Its 320-FBGA, 19 x 19 mm surface-mount package provides a high pin count for designs requiring substantial external connectivity. The -4 designation identifies the device performance grade, while the I suffix identifies the industrial-temperature configuration. The Spartan-3E architecture combines programmable logic with dedicated block RAM and versatile I/O resources, making it suitable for embedded control, data acquisition, protocol bridging, image processing, and general-purpose digital acceleration. Compared with mask-programmed ASICs, it permits firmware-like bitstream updates in the field. Compared with larger programmable devices, it maintains a more compact resource profile and a package option suited to I/O-intensive but cost-controlled systems. Typical uses include industrial control panels, network-interface equipment, video timing and scaler logic, consumer peripherals, and embedded instrumentation. A design may use the FPGA for parallel interface bridging, protocol conversion, state-machine control, or pre-processing before a processor handles higher-level software. The 232 user I/O and 368,640 RAM bits permit simultaneous external connections and moderate data buffering without relying on external memory for every function. PCB implementation requires careful BGA escape routing, decoupling, power integrity, and thermal management. Follow the AMD Spartan-3E Family Data Sheet DS312 for the exact ball map, pin electrical characteristics, configuration requirements, and recommended power architecture. Before substituting any equivalent, verify ball assignments, supported I/O standards, clock resources, configuration interface behavior, and the voltage requirements of the assembled board. This page combines device resources, verified source links, package characteristics, application guidance, and drop-in comparison criteria for engineers evaluating the XC3S500E-4FG320I. The comparison information also distinguishes true same-footprint device options from larger Spartan-3E packages that would require a board redesign and therefore are not treated as drop-in replacements.

RFQ צור קשר
XC3S500E-4FT256I - 500K Gate Spartan-3E FPGA | AMD
XC3S500E-4FT256I

XC3S500E-4FT256I - 500K Gate Spartan-3E FPGA | AMD

The AMD/Xilinx XC3S500E-4FT256I is a Spartan-3E field-programmable gate array with 500,000 equivalent system gates, 10,476 logic cells, 1,164 configurable logic blocks, and 368,640 bits of block RAM. The device provides 190 programmable I/O pins and operates from a 1.2 V core supply in a 256-ball FTBGA package measuring 17 mm by 17 mm. Its -4 speed grade supports clocking up to 572 MHz, while the industrial suffix specifies operation from 0°C to 85°C. An FPGA is a semiconductor whose internal digital logic, interconnect, memory, and I/O can be configured after manufacture. The Spartan-3E family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, dedicated multipliers, and programmable input/output resources on one integrated circuit. This makes the XC3S500E suitable for designs requiring parallel data processing, control logic, protocol bridging, or high-speed interface termination. Principal resources include 10,476 logic cells distributed across 1,164 CLBs, together with 368,640 bits of onboard block RAM. The device offers 190 programmable I/O pins for external memory, communications links, control signals, and data buses. Its 90 nm fabrication technology and 1.2 V core supply define the core electrical characteristics, while the 256-FTBGA package supports compact, high-density surface-mount layouts. The Spartan-3E architecture combines programmable logic with dedicated block RAM and arithmetic resources. This allows designers to implement parallel datapaths without relying exclusively on external memory. The 572 MHz maximum clock figure applies to suitable device and design conditions, so final timing closure must account for the selected speed grade, logic mapping, routing, I/O standards, and board-level constraints. Typical uses include industrial control, communications equipment, instrumentation, video processing, embedded systems, and legacy processor or peripheral replacement. A design can place the FPGA between sensors or processors and external converters, or use its configurable logic to implement protocol conversion, data acquisition, timing, and control functions within one package. PCB design should follow the AMD package pinout, power-decoupling guidance, and ball-grid escape routing rules in DS312. Differential pairs and other sensitive signals require controlled impedance, while ground and supply distribution must be planned carefully for simultaneous switching activity. Toolchain, bitstream, and board-level validation are essential because legacy device migration can depend on software version and timing constraints. This product page combines device resource data, package characteristics, lifecycle information, replacement guidance, and practical PCB-design considerations to support faster engineering evaluation. It also distinguishes genuine same-footprint alternatives from package or resource variants that require redesign rather than simple replacement.

RFQ צור קשר
XC3S500E-4PQ208I - Spartan-3E FPGA 208-BFQFP | AMD
XC3S500E-4PQ208I

XC3S500E-4PQ208I - Spartan-3E FPGA 208-BFQFP | AMD

The AMD XC3S500E-4PQ208I is a Spartan-3E field-programmable gate array in a 208-BFQFP package. It provides 500,000 system gates, 10,476 configurable logic cells, 158 user I/O, and a 4 speed grade. The industrial-temperature suffix I supports operation from 0°C to 85°C. These characteristics make the device suitable for cost-sensitive embedded control, communications, industrial automation, and consumer-equipment designs requiring programmable logic and substantial parallel I/O. A field-programmable gate array is a semiconductor whose digital logic and connectivity are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. The Spartan-3E family combines configurable logic blocks, programmable I/O, block RAM, dedicated arithmetic resources, and clock-management functions on one device. This integration allows a board to implement control logic, protocol handling, data acquisition, and peripheral interfaces without relying on a collection of discrete logic ICs. The XC3S500E-4PQ208I includes 10,476 configurable logic cells and 158 user I/O, providing high connectivity for parallel buses, industrial interfaces, and embedded processor peripherals. Its 4 speed grade is intended for designs operating below the 5 speed-grade ceiling. The 208-pin surface-mount package supports higher I/O density than the smaller 100-pin and 132-pin alternatives in the same family, while the 28 mm by 28 mm footprint requires careful PCB routing and thermal analysis. Spartan-3E devices use configurable logic blocks and distributed or block memory resources to implement digital systems whose requirements may evolve after hardware design begins. The XC3S500E family also supports dedicated multipliers, block RAM, and clock functions for designs requiring arithmetic, local storage, or multiple clock domains. Configuration, pin constraints, timing, and power behavior should be evaluated with the current AMD FPGA design tools before schematic sign-off. Typical applications include industrial automation controllers, telecommunications line-card logic, data-acquisition systems, embedded control platforms, and instrumentation. In these systems, the high I/O count can connect external memories, transceivers, sensors, and parallel processors, while programmable logic allows firmware-independent field updates. Designers should confirm timing closure for the intended clock frequency and verify that the selected I/O standards suit each interface. PCB implementation requires a stable multilayer structure, continuous ground-plane coverage, and careful decoupling around every supply pin. The 208-BFQFP lead pitch requires a qualified assembly process, and exposed programming and configuration signals must be routed away from high-speed nodes. A finished design should also include a defined startup or configuration strategy so the FPGA operates deterministically after power application. This page combines package, logic-resource, temperature, and application guidance with practical drop-in replacement analysis. It also organizes pin, procurement, and selection questions around the device's industrial Spartan-3E positioning, helping engineers compare footprint compatibility, temperature grade, speed grade, and lifecycle needs before releasing a PCB.

RFQ צור קשר
XC3S500E-4PQG208C - 500K Gate Spartan-3E FPGA | AMD
XC3S500E-4PQG208C

XC3S500E-4PQG208C - 500K Gate Spartan-3E FPGA | AMD

The AMD XC3S500E-4PQG208C is a Spartan-3E field-programmable gate array with 500,000 equivalent system gates, 10,476 logic cells, 1,164 configurable logic blocks, and 158 inputs in a 208-pin PQFP package. The device uses a 1.2 V supply and is identified by the provided data as supporting up to 572 MHz. It is a surface-mount programmable logic device for embedded control, signal processing, interface bridging, and parallel data acquisition systems. A field-programmable gate array, or FPGA, is a programmable digital logic device whose configurable logic and interconnect resources can be programmed after manufacture. FPGAs sit above fixed-function logic devices and programmable gate arrays in the digital-semiconductor hierarchy: a design can use programmable logic to implement counters, state machines, ALUs, control logic, and interface circuits without requiring a custom ASIC. Spartan-3E devices provide a practical balance between logic capacity, device cost, and design flexibility for embedded systems. The verified specifications identify the XC3S500E-4PQG208C as a 500K-gate Spartan-3E FPGA with 10,476 logic cells, 1,164 CLBs, 158 inputs, and a maximum clock frequency of 572 MHz. The 208-PQFP package provides a leaded, inspectable footprint for conventional surface-mount assembly. The C suffix and the verified distributor listings identify the exact commercial ordering code; the supplied sources do not provide a complete temperature-grade or lifecycle classification. This FPGA is suitable for control and sequencing logic where multiple parallel channels, counters, timers, and state machines must be implemented in one device. Its logic capacity can also support moderate data paths and protocol interfaces. The 572 MHz maximum clock figure should be treated as a device-level headline value; actual achievable clock rates depend on the selected I/O standard, timing constraints, routing, logic depth, and the external memory or transceiver interface. Typical applications include industrial automation, test-and-measurement front ends, communications adapters, embedded control systems, and signal-processing support. The package is particularly useful where a leaded package is preferred over a fine-pitch BGA and where the design requires a moderate number of I/O connections. Designers should verify board pinout, configuration requirements, power sequencing, I/O standards, and signal-integrity margins against the manufacturer datasheet before layout release. The principal design consideration is package-related routing and signal integrity. A 208-pin PQFP requires adequate copper clearances and controlled escape routing, especially for high-speed clock and interface nets. Configuration storage, bank supply voltages, decoupling, and pinout details must be implemented exactly as specified in the AMD Spartan-3E documentation. This page combines verified distributor and AMD documentation references with application guidance, lifecycle caveats, package-specific design notes, and explicitly qualified replacement analysis for engineers evaluating the XC3S500E-4PQG208C.

RFQ צור קשר
XC3S50A-4FT256C - 50K Spartan-3A FPGA | AMD | 256-FTBGA
XC3S50A-4FT256C

XC3S50A-4FT256C - 50K Spartan-3A FPGA | AMD | 256-FTBGA

AMD XC3S50A-4FT256C is a Spartan-3A field-programmable gate array with approximately 50,000 logic gates, 144 user I/O, and a 256-pin fine-pitch ball grid array package. The device operates from a 1.14 V to 1.26 V core-voltage range and is identified as a last-time-buy product. Its 4 speed grade supports cost-sensitive programmable logic applications where a compact, nonvolatile FPGA implementation is preferable to a fixed-function logic device. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and input/output functions are configured after manufacture. Within the FPGA hierarchy, the Spartan-3A family belongs to the low-to-medium-density programmable-logic segment. The XC3S50A combines approximately 50,000 gates, 144 I/O, and a 256-ball FTBGA package in a surface-mount device suitable for compact embedded control, interface, data-capture, and industrial automation equipment. The available specifications identify 144 user I/O, a 1.14 V to 1.26 V core-voltage range, and an approximate gate count of 50,000. These resources support parallel control logic, protocol interfaces, glue logic, and modest embedded processing systems. The C suffix identifies the commercial product variant, while the -4 portion denotes the device speed grade. Detailed RAM, clock, configuration, and I/O standards were not present in the supplied verified data and must be confirmed from the AMD Spartan-3A family datasheet before design release. The XC3S50A-4FT256C is supplied in tray packaging according to the available product listing. Its 256-pin fine-pitch BGA format creates a compact land pattern but requires careful PCB layout, via-in-pad or via-under-bump considerations, and assembly processes capable of handling closely spaced balls. Signal-integrity, power-delivery, thermal, and exact package-dimension guidance should be taken directly from the AMD DS529 family document and the device pinout information. Typical uses include industrial automation controllers, instrumentation, embedded communications, consumer interfaces, and cost-sensitive control systems. Because the part is listed as last time buy, new production should include lifecycle review, planned end-of-life inventory, and a qualified second source. Lead time is listed as 12 weeks, making procurement planning essential for designs that cannot tolerate a supply interruption. Design engineers should verify the exact pinout, supported I/O standards, configuration interface, memory resources, and power requirements in the AMD Spartan-3A family datasheet before layout release. This page consolidates the supplied distributor data, lifecycle information, pricing references, drop-in family variants, and practical implementation considerations to support engineering selection.

RFQ צור קשר
XC3S50A-4FT256I - Spartan-3A 256-LBGA FPGA | AMD
XC3S50A-4FT256I

XC3S50A-4FT256I - Spartan-3A 256-LBGA FPGA | AMD

The AMD XC3S50A-4FT256I is a Spartan-3A field-programmable gate array in a 256-ball, square, surface-mount LBGA package. The -4 suffix identifies the device speed grade, the FT code identifies the 256-ball package configuration, and the final I indicates industrial-temperature grading. Verified distributor information identifies the device as an FPGA with 144 I/O, 55,296 gates, and 1,584 logic cells. It is positioned for designs that require programmable digital logic, parallel interfaces, embedded control, and compact system integration. A field-programmable gate array is a semiconductor whose digital configuration is defined after fabrication. The FPGA category sits above programmable logic devices and below configurable digital system components, combining configurable logic blocks, programmable I/O, and dedicated resources in one integrated circuit. This hierarchy allows engineers to implement control, communications, data acquisition, signal processing, and interface logic on hardware that can be revised without changing the printed circuit board. The Spartan-3A family provides configurable logic blocks containing lookup tables and flip-flops, along with programmable general-purpose I/O and dedicated multiplier and accumulator resources in DSP48A slices. Those DSP48A resources are useful for multiply-accumulate operations, while the 144-I/O configuration supports systems with substantial external bus and control connectivity. The exact switching, timing, configuration-memory, and electrical limits must be confirmed in the AMD DS529 Spartan-3A family data sheet before a design is released. The XC3S50A-4FT256I is differentiated by its combination of the -4 performance grade, industrial-temperature grading, and 256-ball LBGA package. The industrial marking makes it more appropriate for temperature-controlled factory, telecom, and test equipment than a commercial-temperature alternative. The compact 17 x 17 mm package also supports dense board layouts, although its 256-ball geometry requires careful inspection and assembly planning. Typical applications include industrial automation, telecommunications, embedded instrumentation, data-acquisition systems, and compact control platforms. In these systems, the FPGA can consolidate parallel interface logic, perform protocol conversion, coordinate control sequencing, or implement DSP pipelines. Pairing it with an external data converter, communications transceiver, and nonvolatile configuration storage can produce a complete embedded processing subsystem. Designers should treat the 256-LBGA footprint as a demanding assembly constraint. The board should use an appropriate ball pitch and copper-compatible surface finish, while assembly planning must account for inspection, cleaning, placement, and solder-joint verification. Power rails, configuration sequencing, decoupling, clocking, and I/O standards should be designed from the complete AMD datasheet rather than inferred solely from the ordering code. This page combines verified distributor specifications, package data, and the AMD DS529 family reference with practical considerations that are not visible in a basic distributor listing. It also separates documented facts from parameters that still require schematic-level and board-level verification, helping engineers evaluate the XC3S50A-4FT256I for industrial FPGA designs without relying on assumptions.

RFQ צור קשר
XC3S50A-4FTG256C - 50K Spartan-3A FPGA | AMD
XC3S50A-4FTG256C

XC3S50A-4FTG256C - 50K Spartan-3A FPGA | AMD

The AMD XC3S50A-4FTG256C is a Spartan-3A field-programmable gate array with 50K logic gates, 55,296 logic cells, 1,584 configurable slices, and 144 user I/O in a 256-ball FTBGA package. It is manufactured on 90 nm CMOS technology, operates from a 1.2 V core supply, and is specified at a nominal 667 MHz performance point. The -4 designation identifies its speed grade, while the final C suffix identifies the commercial temperature grade. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O functions are configured after fabrication. An FPGA belongs to the programmable-logic device hierarchy, alongside CPLDs, and provides parallel hardware implementation of control, signal-processing, communications, and data-acquisition functions. The Spartan-3A family combines moderate logic density with a large I/O count in a cost-conscious architecture for embedded control and industrial equipment. The XC3S50A-4FTG256C provides 144 user I/O, giving it substantial connectivity for parallel buses, control signals, and external interfaces. Its 1,584 slices divide the 55,296 logic cells into parallel programmable resources for combinational and sequential logic. The 50K-gate description provides a relative scale for system architects, while the 667 MHz figure establishes the device's timing-performance class for clocked designs. The 256-ball FTBGA package supports compact PCB integration but requires careful escape routing, via-in-pad considerations, and thermal design. A 90 nm fabrication process and 1.2 V core supply place this device in an established low-power FPGA generation. Designers should use the AMD DS529 family data sheet for package dimensions, pin definitions, configuration requirements, bank voltage rules, and supported I/O standards. Typical uses include industrial control systems, instrument interfaces, digital signal-processing front ends, communications equipment, and embedded test systems. Its combination of 144 I/O and 1,584 slices is useful when an application needs many parallel external connections or moderate logic parallelism rather than the density of a larger FPGA. Configuration storage, clocking, power sequencing, and JTAG programming remain essential board-level functions. When replacing another device, verify the exact BGA ball map, power rails, configuration interface, I/O voltage standards, and speed grade rather than relying only on the logic-cell count. The C-grade suffix and -4 speed designation affect system timing and environmental requirements. Use the manufacturer's package pinout and configuration guidance to validate every board-level connection before production release. This product record combines the verified Spartan-3A device characteristics with package-aware replacement guidance, commercial sourcing instructions, and practical design notes for 256-ball FTBGA implementation. It is intended to accelerate initial component screening while preserving the verification work required for production-quality FPGA designs.

RFQ צור קשר
XC3S50A-4TQ144C - 50K Spartan-3A FPGA | AMD/Xilinx
XC3S50A-4TQ144C

XC3S50A-4TQ144C - 50K Spartan-3A FPGA | AMD/Xilinx

The AMD/Xilinx XC3S50A-4TQ144C is a Spartan-3A field-programmable gate array with 55,296 system gates, 1,584 logic elements, 108 user I/Os, and a 144-pin TQFP package. Designed for high-volume, cost-sensitive commercial applications, the device uses a 90 nm process technology and a 1.2 V core. The “-4” grade identifies its performance speed grade, while the “C” suffix denotes the commercial temperature option. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O resources are configured after manufacture. An FPGA sits within the programmable-logic hierarchy above simple fixed logic devices and below software-configured processors. Unlike a mask-programmable ASIC, an FPGA allows design revisions, field updates, and logic changes without fabricating a new custom chip. The XC3S50A-4TQ144C combines a moderate logic capacity with 108 user I/Os in a surface-mount TQFP package. The primary headline features are 55,296 system gates, 1,584 logic elements, and 108 user I/Os. Search results also describe the device as a 50,000-system-gate Spartan-3A FPGA. Its 144-pin TQFP package provides 108 user I/Os for external interfaces and board-level connections, making this device suitable for compact embedded systems requiring substantial parallel connectivity. The Spartan-3A architecture combines configurable logic, programmable I/O, dedicated memory resources, and clock-management resources within a single programmable device. The 90 nm fabrication process supports a compact and cost-sensitive implementation compared with larger, more complex programmable-logic devices. The device’s combination of moderate gate capacity and high I/O availability allows designers to consolidate control, interface, and state-machine functions without using a discrete combination of multiple smaller devices. Typical applications include industrial control, instrumentation, communications equipment, consumer peripherals, embedded control, and general-purpose I/O expansion. The 108 user I/Os are especially useful for systems that need parallel data acquisition, digital control, display interfaces, or external memory connections. In these designs, the FPGA can implement parallel processing and control logic while its configuration system preserves update flexibility. A primary design consideration is supply voltage and I/O compatibility. The available source material specifies a 1.2 V core but does not provide the complete recommended operating ranges, I/O standard options, configuration memory requirements, or power-loss configuration behavior. These values must therefore be confirmed against the complete manufacturer datasheet before schematic capture, pin assignment, and PCB layout are released. This product data consolidates verified distributor specifications, package information, pricing, availability, and same-family replacement options with practical selection guidance. It adds value beyond a basic distributor listing by separating confirmed parameters from missing technical data and explaining where each Spartan-3A option is appropriate.

RFQ צור קשר
XC3S50A-4TQ144I - 50K Spartan-3A FPGA | AMD/Xilinx
XC3S50A-4TQ144I

XC3S50A-4TQ144I - 50K Spartan-3A FPGA | AMD/Xilinx

The AMD/Xilinx XC3S50A-4TQ144I is a Spartan-3A field-programmable gate array with 50,000 system gates, 1,584 configurable logic cells, 55,296 RAM bits, and 108 I/O in a 144-LQFP package. It operates from a 1.14 V to 1.26 V core supply and is specified for an industrial junction-temperature range of -40°C to 100°C. The -4 suffix identifies the device speed grade, while the TQ144 package designation identifies the surface-mount 144-lead package used by the XC3S50A family. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior can be programmed after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and ultimately a semiconductor. Compared with a fixed-function application-specific integrated circuit, an FPGA allows parallel hardware functions, interface adaptation, and design revisions without changing the PCB. The Spartan-3A family is positioned for compact, cost-sensitive designs requiring moderate logic density and extensive user I/O. The Spartan-3A architecture provides five principal programmable functional elements, including configurable logic blocks, programmable interconnect, dedicated block RAM, input/output blocks, and configuration resources. Each configurable logic block contains four-input lookup tables and flip-flop resources for implementing combinational and sequential logic. The available 1,584 logic cells and 55,296 RAM bits support control logic, bus arbitration, low-speed communication interfaces, instrumentation, and general-purpose digital processing. With 108 I/O, the XC3S50A-4TQ144I offers more interface capacity than the smallest devices in the Spartan-3A family. The 144-LQFP package exposes those I/O along with configuration and power pins on a conventional surface-mount footprint. The 50,000-gate rating describes the family’s system-gate scale rather than a guaranteed clock rate, while the -4 speed designation and the manufacturer’s timing specifications determine actual performance. Configuration and pinout details should be verified against the DS529 family datasheet before PCB release. Typical applications include industrial control, telecommunications equipment, consumer electronics, embedded instrumentation, interface bridging, and low-density signal-processing systems. In each case, the combination of 1,584 logic cells, 55,296 RAM bits, 108 I/O, and a compact 144-lead package allows logic and interface functions to be consolidated without adopting a larger FPGA or a separate microcontroller for basic control tasks. Designers should preserve the required core-supply decoupling, use the manufacturer-recommended configuration interface, and confirm every signal’s I/O standard, drive strength, slew rate, and termination requirements against the DS529 datasheet. Programming tools, bitstream compatibility, and end-of-life considerations should also be reviewed because FPGA toolchains and family support evolve over time. This page consolidates verified distributor availability, package and resource details, drop-in replacement analysis, and practical design guidance into a compact engineering reference. It distinguishes documented device facts from parameters that still require manufacturer-data or board-level confirmation.

RFQ צור קשר
XC3S50A-4TQG144C - Spartan-3A FPGA, 108 I/O | AMD
XC3S50A-4TQG144C

XC3S50A-4TQG144C - Spartan-3A FPGA, 108 I/O | AMD

The AMD XC3S50A-4TQG144C is a Spartan-3A field-programmable gate array with 15,840 logic cells, 108 user I/O, 1,584 internal configuration bits, and a 144-pin LQFP package. Its -4 speed designation supports operation up to 250 MHz, while 6.8 kB of block RAM provides dedicated on-chip storage for counters, packet buffers, and small data pipelines. The device is manufactured in a 1.2 V FPGA technology and targets compact embedded control, communications, instrumentation, and industrial logic systems. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and input/output behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, but provides substantially more configurable logic and routing resources. This makes it suitable for parallel data acquisition, protocol conversion, control sequencing, embedded signal processing, and other designs that benefit from hardware concurrency. Configuration data determines the implemented circuit, allowing design revisions without changing the PCB. The Spartan-3A architecture combines programmable logic blocks, dedicated block RAM, digital clock management resources, and selectable I/O standards in a single device. The 108 I/O positions give a board designer substantial connectivity in a 144-lead surface-mount package. The 250 MHz headline operating figure should not be interpreted as a guaranteed logic-clock rate for every arbitrary design; actual timing depends on the selected clocking resources, routing path, I/O standard, speed grade, and board conditions. The -4 suffix identifies the device speed grade, while the TQG144C portion identifies the 144-pin package and device-grade ordering information. This ordering code must be checked against the PCB footprint, temperature grade, and production requirements rather than treated as interchangeable with every XC3S50A suffix. The Spartan-3A family is an established programmable-logic platform, and the official DS529 family data sheet remains the primary document for configuration requirements, pin descriptions, electrical characteristics, and package drawings. Typical uses include industrial control and data acquisition, serial-interface bridging, embedded communications gateways, low-cost test equipment, and compact embedded processing systems. A microcontroller can handle supervisory control while the FPGA performs deterministic sampling, protocol conversion, or parallel computations in parallel with the processor. Such partitioning reduces pressure on a general-purpose CPU and can simplify timing-sensitive implementations. Board design should follow the AMD package pinout and configuration guidance exactly. Confirm that the LQFP-144 footprint, power rails, decoupling, configuration interface, and JTAG connections match the selected board revision. Because the Spartan-3A is a mature architecture, also verify software-tool support, bitstream compatibility, and the availability of any required configuration memory before committing the design to production. This product record combines the exact XC3S50A-4TQG144C identifiers with the AMD family data sheet and same-package replacement analysis. It also highlights practical configuration, layout, timing, and thermal checks that engineers can apply when qualifying an FPGA design for low-cost, compact, or industrial equipment.

RFQ צור קשר
XC3S50A-4TQG144I - 50K Spartan-3A FPGA | AMD Xilinx
XC3S50A-4TQG144I

XC3S50A-4TQG144I - 50K Spartan-3A FPGA | AMD Xilinx

AMD Xilinx XC3S50A-4TQG144I is a Spartan-3A field-programmable gate array with 50,000 system gates, 1,584 configurable logic cells, 55,296 RAM bits, and 108 user I/O in a 144-LQFP package. The device operates from a 1.14 V to 1.26 V core supply and is implemented using 90 nm CMOS technology, with a stated maximum clock frequency of 667 MHz. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. The XC3S50A belongs to the Spartan-3A hierarchy of low-cost FPGAs, combining programmable logic with block RAM and a high pin count. This makes it a practical platform for embedded control, protocol conversion, signal conditioning, and data acquisition where a fixed application-specific integrated circuit would be too specialized. The principal device characteristics include 1,584 logic cells organized into 176 logic array blocks, 55,296 bits of block RAM, and 108 user I/O. Its -4 speed designation corresponds to the stated 667 MHz performance level, while the industrial I suffix identifies the extended-temperature grade. The -40 °C to 100 °C junction-temperature range supports industrial and otherwise temperature-demanding equipment, provided the board-level thermal design keeps the junction within its rated limit. Spartan-3A devices combine programmable logic fabric, configurable I/O blocks, dedicated block RAM, and internal clocking resources on one die. The 1.2 V core architecture reduces supply requirements while leaving the I/O structure capable of supporting external system connections. Design timing, however, depends on the selected clock region, logic depth, routing congestion, I/O standards, and external timing budget, so the 667 MHz figure should not be interpreted as a guaranteed operating frequency for every design. Typical uses include industrial automation modules with sensors and actuators, telecommunications interface equipment, embedded display and control systems, and low-cost data-acquisition products. The 108 available user I/O are particularly useful when the design must bridge multiple buses, capture parallel signals, or provide discrete control outputs while keeping the logic in reprogrammable hardware. The principal design consideration is the 144-LQFP footprint. Place all decoupling capacitors close to the supply pins, preserve the manufacturer-defined VCC and ground connections, and assign I/O standards only through supported pins. Use the AMD Spartan-3A family data sheet for the complete pin table, configuration requirements, and board-level power sequencing before fabrication. This page combines device specifications, application guidance, engineering design notes, and a focused replacement comparison to help engineers evaluate the XC3S50A-4TQG144I beyond a basic distributor parameter listing.

RFQ צור קשר
XC3S50A-4VQ100C - 50K Spartan-3A FPGA | AMD | 100-TQFP
XC3S50A-4VQ100C

XC3S50A-4VQ100C - 50K Spartan-3A FPGA | AMD | 100-TQFP

AMD XC3S50A-4VQ100C is a Spartan-3A field-programmable gate array (FPGA) providing 1,584 logic cells, 55,296 RAM bits, 68 user I/Os, and approximately 50,000 logic gates in a 100-pin TQFP package. The device operates from a 1.14 V to 1.26 V core supply, uses 90 nm FPGA technology, and is implemented on a 0.667 GHz performance grade. A field-programmable gate array is a semiconductor device whose digital logic, memory, and I/O behavior are defined by a programmable configuration bitstream. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides reconfigurable parallel logic for cost-sensitive, I/O-intensive electronic products. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during development or, where configuration technology permits, after deployment. The Spartan-3A family targets high-volume designs requiring moderate logic density. This device includes 176 configurable logic blocks, 68 user I/Os, and 55,296 bits of block RAM. Supported configuration approaches include Master Serial mode using platform flash PROM, Master SPI mode using commodity serial flash, BPI mode using commodity parallel flash, Slave Parallel mode using SelectMAP or a processor, and Slave Serial mode. These interfaces allow the configuration source and board-level design to be selected according to cost, density, and update requirements. The XC3S50A-4VQ100C is identified as a -4 speed-grade device with 667 MHz performance, a 1.2 V core, and a commercial operating-temperature range of 0°C to 85°C junction temperature. Its 100-terminal surface-mount package provides 68 user I/O positions according to the verified distributor data. Configuration data is retained externally in a PROM or flash device, so the FPGA's implemented logic is not fixed at manufacture. Typical uses include industrial control interfaces, communication adapters, instrumentation, test equipment, embedded control, and general-purpose programmable logic. Its 68 I/Os make it appropriate for parallel data acquisition, control, bridging, and interface-conversion designs where a small pin count, legacy 90 nm economics, and reconfigurability are more important than the density offered by newer FPGA families. The primary design consideration is that configuration storage, programming, clocking, decoupling, and I/O voltage compatibility must be planned before schematic capture. Designers should use the AMD Spartan-3A family data sheet for the exact package pinout and device-specific constraints, and should verify the selected configuration PROM against the supported bitstream and interface requirements. This page consolidates the verified AMD and distributor specifications, exact package and resource information, commercially sourced alternatives, and practical replacement-selection guidance. It is intended to help engineers identify whether the XC3S50A-4VQ100C remains appropriate for an existing Spartan-3A design without overlooking temperature-grade or speed-grade differences.

RFQ צור קשר
XC3S50A-4VQ100I - 50K Spartan-3A FPGA | AMD | Industrial
XC3S50A-4VQ100I

XC3S50A-4VQ100I - 50K Spartan-3A FPGA | AMD | Industrial

AMD XC3S50A-4VQ100I is a Spartan-3A field-programmable gate array with 50,000 system gates, 1,584 logic cells, 68 user I/Os, and a maximum stated performance of 667 MHz, supplied in a 100-pin TQFP package. The device operates from a 1.2 V core supply and is specified for industrial-temperature use from -40°C to +100°C. A Spartan-3A FPGA is a programmable logic device within the broader semiconductor and FPGA hierarchy. Unlike a fixed-function application-specific integrated circuit, it combines configurable logic, programmable interconnect, memory resources, and general-purpose I/O. Its 100-pin TQFP package makes it suitable for designs requiring moderate logic density and external peripheral connectivity without using a large ball-grid-array package. The XC3S50A-4VQ100I provides 1,584 logic cells and 68 I/Os, allowing designers to implement control logic, interface protocols, data acquisition, or embedded state machines in one programmable device. The -4 speed designation identifies its performance grade, while the I suffix identifies the industrial-temperature option reported in the verified product data. The 90 nm fabrication process and 1.2 V core supply are consistent with the Spartan-3A generation. Its architecture supports configuration from several serial and parallel memory interfaces, including Master Serial, Master SPI, BPI, Slave Parallel, SelectMAP, and Slave Serial modes. Configuration storage can therefore use commodity serial flash, parallel flash, or platform flash, depending on board-level requirements. The exact configuration file size, supported I/O standards, and recommended termination network are not included in the supplied source snippets. Typical uses include industrial automation, communications equipment, test and measurement systems, embedded control, and I/O-intensive consumer or industrial products. The 68 available I/Os support external sensors, displays, memory devices, and communications transceivers, while the 50K-gate device size is appropriate for moderate parallel logic rather than high-throughput processor applications. Design planning should include correct configuration-pin connections, suitable bypass capacitors, and a verified JTAG programming chain. The 100-TQFP footprint also requires careful escape routing for fine-pitch leads and adequate board area for power distribution. Because a detailed pin map and current pricing were not present in the supplied data, the package pinout is intentionally left unavailable and the commercial tiers require a current quotation. This product record consolidates verified distributor specifications, same-family drop-in candidates, application guidance, and practical FPGA design considerations. It is intended to help engineers assess package compatibility, configuration strategy, thermal requirements, and procurement without substituting unsupported electrical or lifecycle assumptions.

RFQ צור קשר
XC3S50A-4VQG100C - 50K Spartan-3A FPGA VQFP-100 | AMD
XC3S50A-4VQG100C

XC3S50A-4VQG100C - 50K Spartan-3A FPGA VQFP-100 | AMD

The AMD Xilinx XC3S50A-4VQG100C is a Spartan-3A field-programmable gate array (FPGA) with 1,584 logic cells, 176 configurable logic blocks (CLBs) and 50,000 logic gates, packaged in a 100-pin VQFP (TQG100) surface-mount package with a 14 x 14 mm body. The device is built on a 90 nm CMOS process, uses a 1.2 V core supply and offers 68 user I/O, making it one of the smallest pin-count Spartan-3A options for cost-sensitive, I/O-intensive logic. A field-programmable gate array is a semiconductor whose internal interconnection and logic fabric are defined by a configuration bitstream loaded at power-up. In the device hierarchy an FPGA sits above programmable logic devices such as CPLDs and complex PLDs, and above that sit the ASIC and custom silicon it replaces. Because a single FPGA can implement what would otherwise require several glue-logic ICs and a microcontroller, it shortens development cycles and consolidates glue logic, interface adaptation and control functions onto a single silicon device. Key features of the XC3S50A-4VQG100C include the -4 speed grade, which corresponds to a 250 MHz system clock rate for this device, 68 user I/O in a compact 100-pin footprint, and the full Spartan-3A configuration feature set. Configuration is supported through Master Serial mode using a platform Flash PROM, Master SPI mode with commodity serial flash, BPI mode with commodity parallel flash, Slave Parallel mode (SelectMAP) using a processor, and Slave Serial mode. An on-chip oscillator and typical / startup clocking support the configuration and clock-management needs of small systems. Architecturally, the Spartan-3A fabric combines distributed RAM, dedicated block RAM, and 18 dedicated multipliers in DSP-enabled versions of the family, giving designers datapath resources without leaving the package. The 90 nm process delivers low static and dynamic power for a device with a 1.2 V core, while the -4 speed grade is the mainstream industrial and commercial cost point for designs that do not require the -5 grade timing margin. Typical applications for the XC3S50A-4VQG100C include industrial control and instrumentation front-ends, LED display and lighting controllers, low-cost sensor aggregation nodes, consumer appliance sequencers, small protocol converters and interface bridges, and education or prototyping platforms that need a compact, low-pin-count FPGA. A key design consideration is that the 100-pin VQFP footprint is among the tightest in the family, so routing to 68 I/O in a 14 x 14 mm area demands short, well-referenced escape routing and a solid ground plane under the device. Also note that the C suffix denotes the commercial 0 to 85 C temperature grade; industrial or extended-temperature assemblies should be selected when the end environment is wider.

RFQ צור קשר
XC3S50A-4VQG100I - Spartan-3A 68-I/O FPGA | AMD
XC3S50A-4VQG100I

XC3S50A-4VQG100I - Spartan-3A 68-I/O FPGA | AMD

The AMD XC3S50A-4VQG100I is a Spartan-3A field-programmable gate array with 1,584 configurable logic cells, 68 user I/O pins, a 1.2 V core supply, and a 100-pin TQFP package. The device is specified for an industrial temperature range of -40°C to +100°C, making it suitable for temperature-stable programmable control, signal conditioning, interface bridging, and embedded data-processing systems. A field-programmable gate array is a digital semiconductor whose configurable logic, interconnect, and I/O resources can be programmed after manufacture. The Spartan-3A family belongs to the FPGA and CPLD product hierarchy and combines programmable logic density with a relatively large I/O count. This balance allows one package to implement control logic, protocol interfaces, data acquisition functions, and peripheral connectivity without requiring a separate microcontroller for every task. The XC3S50A-4VQG100I provides approximately 50,000 logic gates, 68 user I/O pins, 1,584 logic cells, and a 1.2 V core. Its -4 designation identifies the device speed grade, while the industrial suffix supports operation from -40°C to +100°C. The 100-pin TQFP package also exposes more I/O than smaller FPGA packages and remains practical for conventional board assembly. Exact RAM, block-RAM, clock, and I/O voltage details should be confirmed in the manufacturer datasheet before final design release. The Spartan-3A architecture is useful when a design requires deterministic parallel logic, flexible pin assignment, and firmware-controlled reconfiguration. Typical implementation patterns include I/O-intensive industrial controllers, data-acquisition front ends, communication protocol converters, motion-control sequencing, and display-interface logic. Parallel processing and dedicated I/O access can reduce the need for external glue logic while preserving a compact embedded footprint. A key design consideration is power and timing. The 1.2 V core rail must be generated cleanly and decoupled close to the device, while every external I/O voltage must satisfy the selected bank's voltage limits. Designers should also use the exact Spartan-3A pin table when assigning balls or pins, account for configuration and startup behavior, and validate timing with the appropriate Xilinx development tools for the installed device and speed grade. This page combines the exact device characteristics with package-specific guidance, practical application fit, comparison criteria, and engineering-oriented replacement notes. These details help engineers distinguish direct package-compatible options from alternatives that may require a different footprint, speed grade, temperature grade, or FPGA architecture.

RFQ צור קשר
XC3S50AN-4FT256C - 50K Spartan-3AN FPGA | AMD
XC3S50AN-4FT256C

XC3S50AN-4FT256C - 50K Spartan-3AN FPGA | AMD

AMD XC3S50AN-4FT256C is a Spartan-3AN field-programmable gate array with 50,000 equivalent logic gates, 1,584 logic cells, 176 configurable logic blocks, 195 I/O, and a maximum clock frequency of 667 MHz. The device is supplied in a 256-ball grid array package and uses a 1.2 V core supply. Its combination of parallel programmable logic, dedicated digital signal processing resources, and embedded-memory capability makes it suitable for embedded signal-processing, communications, control, and industrial interface systems. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the broader programmable-logic hierarchy: programmable logic device, configurable logic device, FPGA, and semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA permits design changes, parallel processing, and hardware adaptation without changing the printed circuit board. The Spartan-3AN family combines configurable logic blocks, dedicated block RAM, and DSP resources in a programmable SoC-oriented architecture. Key device characteristics include 55,296 combinational gates, 1,584 configurable logic cells, 176 configurable logic blocks, 195 user I/O, and a listed maximum operating frequency of 667 MHz. The 90 nm fabrication process and 1.2 V core supply place the device in the classic low-power Spartan architecture. Its large BGA package also provides many signal connections for high-pin-count designs, although the dense ball grid requires careful escape-routing and assembly planning. The Spartan-3AN architecture supports parallel datapath implementation because multiple configurable logic blocks and dedicated arithmetic resources can operate concurrently. This is valuable for filters, fixed-point transforms, serial interfaces, and control logic that would require multiple conventional components in a fixed implementation. Designers can partition a system among lookup tables, flip-flops, block RAM, DSP arithmetic, dedicated I/O, and general-purpose I/O, then validate timing through the Spartan-3 FPGA design flow. Typical uses include industrial automation, data acquisition, instrumentation, communications infrastructure, embedded control, and digital signal-processing subsystems. The 195 I/O count supports multi-channel data collection and external interfaces, while the 667 MHz listed clock rate provides a high-speed fabric for pipelined processing. For designs requiring secure remote updates, embedded memory, or asynchronous serial configuration, the family-level Spartan-3AN features should be checked against the exact configuration and memory requirements. Board design requires careful attention to the 256-BGA footprint, multilayer PCB construction, via-in-pad and solder-mask practices where appropriate, and decoupling of the 1.2 V core and I/O supplies. Maintain the voltage and decoupling recommendations in the AMD Spartan-3AN family data sheet, and verify the pinout against the selected 256-ball package drawing rather than relying on family-level diagrams. This product record combines the exact ordering code, package information, Spartan-3AN resource figures, configuration references, and practical replacement guidance. It is intended to help engineers confirm footprint compatibility, evaluate known same-family alternatives, and plan an FPGA migration without overlooking bitstream, timing, assembly, or tool-chain consequences.

RFQ צור קשר
XC3S50AN-4FT256I - 1584 Logic Cells Spartan-3AN | AMD
XC3S50AN-4FT256I

XC3S50AN-4FT256I - 1584 Logic Cells Spartan-3AN | AMD

The AMD XC3S50AN-4FT256I is a Spartan-3AN field-programmable gate array with 1,584 logic elements, 55,296 RAM bits, and 195 programmable I/O pins, packaged in a 256-ball LBGA. It uses 90 nm fabrication technology, has a 1.2 V core supply, and supports operation across an industrial junction-temperature range of -40°C to +100°C. The device is identified as a four-speed-grade variant in a 256-ball surface-mount package. A field-programmable gate array, or FPGA, is a programmable semiconductor whose configurable logic blocks, block RAM, programmable input/output resources, and dedicated hardware blocks can be assembled into application-specific digital circuits. FPGAs sit between fixed-function logic devices and software processors within the broader semiconductor hierarchy. They are useful when a design needs parallel processing, deterministic hardware response, flexible interface support, or field updates without changing the printed circuit board. The XC3S50AN provides 176 configurable logic blocks, 1,584 logic cells, and 55,296 bits of block RAM. Its 195 programmable I/O pins support connections to external memories, processors, sensors, communications circuits, and industrial control peripherals. The four speed designation supports designs that require more timing margin than a lower-speed grade, while the industrial temperature suffix identifies its intended -40°C to +100°C junction-temperature operating class. This Spartan-3AN device uses a 90 nm FPGA process and a 1.2 V core supply. These characteristics place it among Xilinx and AMD’s low-density Spartan devices, where configuration flexibility is balanced against relatively modest logic capacity. Design teams should evaluate the available logic, RAM, and I/O resources against the target design rather than relying on nominal gate counts alone. Typical applications include industrial control, data acquisition, embedded communications, instrumentation, embedded processing, and low-density interface or control logic. The 195 available I/O pins are especially useful when the board must connect directly to multiple sensors, memory devices, transceivers, or mixed-signal peripheral circuits while preserving programmable logic for timing and control functions. Use the manufacturer pinout and configuration guidance when assigning the 256-ball footprint. Confirm every power, ground, configuration, clock, and user-I/O connection against DS557, and budget startup configuration time and core supply requirements in the system power sequence. The legacy device also requires an appropriate Xilinx development environment and device support for implementation, simulation, and programming. This page combines device specifications, verified package details, application guidance, replacement analysis, and practical implementation considerations in one engineering-focused reference. It is intended to help designers assess logic capacity, timing class, thermal range, package compatibility, tool-chain availability, and sourcing constraints before integrating the FPGA into a new or existing platform.

RFQ צור קשר
XC3S50AN-4TQ144I - 50K Spartan-3AN FPGA | Xilinx
XC3S50AN-4TQ144I

XC3S50AN-4TQ144I - 50K Spartan-3AN FPGA | Xilinx

The Xilinx XC3S50AN-4TQ144I is a Spartan-3AN field-programmable gate array with 55,296 RAM bits, 1,584 logic elements, and 108 user I/O pins in a 144-pin TQFP package. It uses 90 nm fabrication technology, operates from a 1.2 V core supply, and is rated for an industrial junction-temperature range of -40°C to 100°C. The -4 speed grade and industrial-temperature designation make it suitable for embedded control, communications, industrial automation, and compact digital signal-processing systems requiring reconfigurable logic. A field-programmable gate array, or FPGA, is a programmable digital semiconductor containing configurable logic blocks, programmable I/O, and embedded memory. Within the device hierarchy, the XC3S50AN-4TQ144I is a Spartan-3AN FPGA, a member of the Xilinx Spartan-3 family. Unlike a fixed-function application-specific integrated circuit, an FPGA can be programmed after manufacture to implement parallel processing, control logic, serial interfaces, protocol handling, or other system-specific functions. Principal features include 176 logic array blocks, 1,584 configurable logic elements, 55,296 bits of block RAM, and 108 user I/O pins. The -4 designation identifies the device speed grade, while the industrial suffix supports operation across a -40°C to 100°C junction-temperature range. The Spartan-3AN architecture also supports non-volatile configuration and data-storage capabilities, distinguishing it from the related Spartan-3A family. The 144-pin TQFP package exposes the device's programmable I/O and supply connections on a surface-mount PCB footprint. Its 108 user I/O count provides substantial parallel connectivity for external memories, data converters, communication transceivers, and general control peripherals. Designers should still confirm the exact I/O standard, pin assignment, and configuration requirements against the package-specific pinout before routing a new PCB. Typical applications include industrial control systems, data-acquisition equipment, embedded communications, instrumentation, video processing, and low-cost FPGA prototyping. The device is especially useful where logic parallelism or field reconfiguration provides more flexibility than a fixed microcontroller or application-specific controller. A key design consideration is that pin-compatible alternatives can differ in temperature grade, speed grade, embedded flash, and configuration behavior. Validate the complete ordering code, supported I/O standards, configuration memory interface, and power architecture before approving a replacement. This page combines package-aware alternatives, engineering guidance, and application analysis to support that decision. For this Spartan-3AN FPGA, the main design task is balancing flexible programmable logic against board-level requirements. The 50K-density device offers 1,584 logic elements and 108 user I/O pins, providing enough parallel resources for compact embedded systems without requiring a larger FPGA package. Its 90 nm process and 1.2 V core supply also require careful attention to bypass capacitance, signal integrity, thermal margins, and configuration startup behavior. Engineers should use the manufacturer datasheet and package pin table as the authority for final connectivity, supported voltage standards, and power sequencing.

RFQ צור קשר
XC3S50AN-5FT256C 50K Spartan-3AN FPGA | AMD Xilinx
XC3S50AN-5FT256C

XC3S50AN-5FT256C 50K Spartan-3AN FPGA | AMD Xilinx

AMD Xilinx XC3S50AN-5FT256C is a Spartan-3AN field-programmable gate array built for compact, logic-intensive embedded systems. The device provides 1,584 logic cells organized into 176 configurable logic blocks, 55,296 bits of block RAM, and 195 user I/O in a 256-LBGA package. Its -5 speed grade supports design-dependent timing performance up to 667 MHz under the stated device conditions. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic, memory, and I/O in one device. FPGAs sit within programmable logic devices and broader semiconductor systems, allowing designers to implement parallel datapaths, control logic, interface bridges, and signal processing without relying on a fixed application-specific integrated circuit. The Spartan-3AN family combines this flexibility with low-power 90 nm fabrication. Important device characteristics include 1,584 logic cells, 176 CLBs, 55,296 bits of RAM, and 195 user I/O. The 17 mm by 17 mm surface-mount package also supports multiple configuration methods identified for the family, including serial and parallel configuration interfaces. These resources make the XC3S50AN suitable for embedded control, industrial automation, communications, and instrumentation systems where parallel logic can simplify an implementation. The -5 designation identifies a faster device grade than the -4 options commonly encountered in the Spartan-3AN family. This grade is useful when system timing requires additional performance margin, although final timing closure still depends on the selected I/O standards, clocking architecture, routing demand, and design complexity. The 90 nm process technology and 1.2 V core supply reflect the architecture's focus on low-power programmable logic rather than very high-performance logic density. Typical applications include industrial sensor and motion-control nodes, programmable logic controllers, communications gateways, instrument controllers, embedded test systems, and low-power edge-processing modules. Its 195 I/O count is particularly useful when a design must combine multiple buses, status indicators, serial links, and control outputs without using several companion logic devices. PCB implementation requires careful ball-grid-array layout and power planning. Place all required decoupling capacitors close to the associated supply balls, provide a clean ground reference, and route sensitive clock and configuration signals away from high-current switching nodes. Confirm the selected package land pattern, voltage rails, configuration interface, and I/O standards against the AMD Spartan-3AN documentation before releasing the PCB. This product page combines package, resource, I/O, and cross-reference information with same-footprint alternatives and practical design guidance. It supports engineers comparing FPGA capacity, speed grade, package compatibility, legacy-tool constraints, and migration risk before selecting a production device.

RFQ צור קשר
XC3S700A-4FG400C 700K FPGA, 311 I/O, 400-BGA | Xilinx
XC3S700A-4FG400C

XC3S700A-4FG400C 700K FPGA, 311 I/O, 400-BGA | Xilinx

The Xilinx XC3S700A-4FG400C is a Spartan-3A field-programmable gate array with approximately 700,000 system gates, 13,248 configurable logic cells, 311 I/O sites, and a 400-ball S-PBGA package measuring 21 mm by 21 mm. It operates from a 1.14 V minimum supply to a 1.26 V maximum supply, with a -4 speed grade and a commercial temperature range of 0°C to 85°C. An FPGA is a semiconductor whose digital logic, interconnect, and I/O can be configured after manufacture. Within the product hierarchy, the XC3S700A-4FG400C is a programmable logic device, then an FPGA, then a general-purpose semiconductor used for parallel processing, control, interface bridging, and embedded signal processing. The Spartan-3A family targets cost-sensitive applications requiring more capability than small CPLDs while avoiding the resource level of the largest FPGAs. Key features include approximately 700,000 system gates, 13,248 logic cells, 311 I/O, and up to 45 KB of block RAM according to the family datasheet information. The device is manufactured using a 90 nm process and uses a 1.2 V core supply. Its -4 designation identifies a performance grade, while the commercial-temperature suffix supports designs operating between 0°C and 85°C. The package provides 400 surface-mount balls arranged for high-density board integration. The Spartan-3A architecture combines programmable logic, dedicated arithmetic resources, block memory, programmable I/O, and dedicated configuration functions. With 667 MHz reported for the target device and 250 MHz cited in a summarized family specification, timing design must follow the speed-grade-specific AC and DC limits in AMD datasheet DS529. The 400-BGA footprint also requires careful via-in-pad, solder-mask, thermal, and signal-integrity planning during PCB layout. Typical applications include industrial control, networked communications equipment, video and image processing, consumer peripherals, and cost-sensitive embedded systems. The 311 I/O sites make the device useful for parallel interfaces and substantial external bus connectivity, while the integrated DSP and memory resources can reduce the need for external components. Designs must also account for configuration storage, clocking, decoupling, and JTAG programming requirements. The primary design trade-off is fixed legacy-device availability rather than raw logic capacity. Because the Spartan-3A family is an established platform, engineers should validate I/O standards, timing, tooling support, and PCB footprint compatibility before committing a new production design. Use AMD DS529 for the authoritative family pinout, package information, electrical characteristics, and configuration guidance. This product record combines the device specifications, package constraints, lifecycle considerations, drop-in comparisons, and practical PCB guidance into an engineering-focused reference. It also highlights the need to verify toolchain availability and current sourcing status before starting a design, particularly where long-lived industrial or aerospace programs depend on exact device continuity.

RFQ צור קשר
XC3S700A-4FG400I - 400-BGA Spartan-3A FPGA | AMD
XC3S700A-4FG400I

XC3S700A-4FG400I - 400-BGA Spartan-3A FPGA | AMD

The AMD XC3S700A-4FG400I is a Spartan-3A field-programmable gate array in a 400-ball grid-array package, with 13,248 logic cells, 311 user I/O, and 368,640 bits of configuration memory. The -4 speed designation identifies its performance grade, while the industrial I suffix denotes the specified operating-temperature class. The device is suitable for programmable control, interface, signal-processing, and embedded-system applications requiring substantially more I/O than small CPLDs provide. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs and ASICs, offering high parallelism and reconfigurable hardware. Unlike a fixed-function microcontroller, the XC3S700A-4FG400I can implement multiple independent logic paths, state machines, interfaces, and control functions in one configurable device. The Spartan-3A architecture provides 13,248 logic cells and 311 user I/O in the specified 400-BGA configuration. Its 368,640-bit configuration memory supports the programmed logic and routing network. The high I/O count is especially valuable for industrial controllers, communications interfaces, test equipment, and embedded systems that connect multiple sensors, converters, transceivers, and peripheral devices. According to the manufacturer datasheet DS529-1 (v2.0), the Spartan-3A family supports multiple package options and device configurations. The exact XC3S700A-4FG400I ordering code combines the XC3S700A device, -4 performance grade, FG400 package designation, and industrial-temperature suffix. Package construction, pin definitions, supported I/O standards, and configuration requirements must be implemented from the manufacturer pinout and package tables. Typical implementations include industrial automation, data acquisition, communications, embedded control, instrumentation, and general-purpose digital prototyping. The 311 available user I/O allow a single FPGA to bridge sensors and actuators while executing parallel control logic. Legacy designs may require the mature Spartan-3A tool flow, configuration memory interface, clocking architecture, and level-shifting considerations for modern mixed-signal systems. For new layouts, route configuration, dedicated pins, power, ground, and differential or high-speed interfaces according to the manufacturer package guidelines. Preserve the recommended decoupling and configuration startup behavior. Because this device is obsolete, verify the programmed bitstream, I/O standards, and timing against the archived design files before committing to a production replacement. This product record combines the device architecture, verified package and resource data, lifecycle information, pin-compatible family alternatives, and application-oriented design guidance. It supports engineers comparing the XC3S700A-4FG400I with other Spartan-3A speed grades and package variants while preserving the existing 400-BGA board footprint.

RFQ צור קשר
XC3S700A-4FG484C - 13,248-Cell Spartan-3A FPGA | AMD
XC3S700A-4FG484C

XC3S700A-4FG484C - 13,248-Cell Spartan-3A FPGA | AMD

AMD XC3S700A-4FG484C is a Spartan-3A field-programmable gate array with 13,248 logic cells, 372 user I/O pins, and 368,640 bits of block RAM in a 484-FBGA surface-mount package. The device uses the -4 speed grade and a commercial junction-temperature range of 0°C to 85°C. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after fabrication. Within the broader hierarchy, an FPGA is a programmable-logic device and a user-programmable semiconductor. It replaces many application-specific ASIC functions when a design must be revised, expanded, or produced in relatively low volumes without changing the physical circuit design. The XC3S700A belongs to the Spartan-3A family and combines configurable logic blocks, dedicated block RAM, programmable I/O, and clocking resources. Its 13,248 logic cells provide substantial parallel-processing capacity for embedded control, data acquisition, communications, and industrial interface designs. The 372 user I/O pins support broad external connectivity, while 368,640 bits of block RAM support buffering, packet storage, data formatting, and state-holding functions. The -4 designation identifies the device's performance class within the Spartan-3A family. The FG484 package is a 23 mm × 23 mm FBGA intended for surface-mount assembly and provides the pin count required for designs exposing many external signals. Configuration data determines the implemented logic at startup, allowing the same physical device to support multiple firmware-defined functions. Typical applications include industrial automation controllers, data-acquisition systems, communications equipment, embedded video processing, consumer electronics, and automotive or telecommunications control modules. The large I/O count is particularly useful when a design combines parallel sensors, external memories, converters, communication transceivers, and high-speed digital interfaces on one programmable board. Designers should validate signal integrity at each interface, preserve the required configuration sequence, and use the manufacturer pinout and PCB guidelines for the 484-FBGA footprint. Power, clock, decoupling, and termination decisions must be checked against the selected I/O standards and the -4 timing constraints before release to production. This page combines the device's core resource figures, package details, lifecycle considerations, drop-in family options, and application guidance to support faster engineering selection. The AMD/Xilinx Spartan-3A family data sheet DS529 remains the primary technical reference for architecture, electrical characteristics, pin assignments, and package implementation.

RFQ צור קשר
XC3S700A-4FG484I - 700K Gate Spartan-3A FPGA | AMD
XC3S700A-4FG484I

XC3S700A-4FG484I - 700K Gate Spartan-3A FPGA | AMD

The AMD XC3S700A-4FG484I is a Spartan-3A field-programmable gate array with 700,000 logic gates, 13,248 logic cells, 372 user I/Os, and a 484-pin FBGA package. It uses 90 nm CMOS technology, operates from a 1.2 V core supply, and is listed with a maximum performance frequency of 667 MHz. The device provides the logic density and pin count required for embedded control, communications, signal processing, and industrial interface designs. A field-programmable gate array is a programmable semiconductor that combines configurable logic blocks, programmable interconnect, and input/output resources into one device. In the product hierarchy, an FPGA is a programmable-logic IC, while the Spartan-3A family occupies the cost-sensitive, low-to-medium-density segment. Instead of implementing a fixed digital function in mask-programmed silicon, engineers define the logic and signal routing in a hardware description and configure the FPGA after manufacture. The XC3S700A-4FG484I combines 700,000 gates with 372 user I/Os in a 23 x 23 mm FBGA-484 package. Its 13,248-cell architecture can support parallel datapaths, protocol bridges, control logic, and embedded state machines. The -4 speed designation identifies the device performance grade, while the 484-ball package supports dense board-level integration without relying on a large leaded package. The device is built on 90 nm CMOS technology and uses a 1.2 V core supply, making it appropriate for designs that need substantial programmable logic without the power and complexity of a larger FPGA. Its 667 MHz listed maximum frequency provides a useful timing target for synchronous control, clocked data paths, and communication interfaces. Exact timing closure remains design- and tool-dependent because external memory interfaces, I/O timing, and routing can alter the achievable clock. Typical uses include industrial networking equipment, programmable control systems, communications gateways, sensor aggregation, and embedded instrumentation. The 372 I/O count is especially useful when a design must connect multiple buses, capture parallel data, or bridge processors and peripherals. A single FPGA can consolidate control logic and interface adaptation without requiring several separate programmable devices. PCB implementation should follow the AMD package pinout and recommended power, decoupling, and thermal-layout guidance. The 484-ball FBGA requires careful escape routing, multiple power planes, and plane-via distribution to control impedance and return current. Designers should also budget device configuration time and verify that the selected bitstream, clocking architecture, and I/O standards are supported by the implementation flow. This product page combines the device specifications, manufacturer family documentation, package details, practical design considerations, and verified drop-in candidates. It also distinguishes ordering and temperature-grade suffixes so engineers can identify a direct replacement without assuming that a different commercial-grade or speed-grade variant is electrically identical.

RFQ צור קשר
XC4VFX100-10FFG1152C - 94,896-Cell FPGA | Xilinx | Industrial
XC4VFX100-10FFG1152C

XC4VFX100-10FFG1152C - 94,896-Cell FPGA | Xilinx | Industrial

The Xilinx, Inc. XC4VFX100-10FFG1152C is a Virtex-4 FX field-programmable gate array with 94,896 logic cells, 576 user I/Os and a maximum internal clock frequency of 1028 MHz. Manufactured on a 90 nm CMOS process, the device is packaged in a 1152-pin FCBGA and operates from 0°C to 85°C. An FPGA is a programmable semiconductor in which configurable logic blocks, memory resources, input/output circuitry and dedicated processing elements form a hardware function that is defined after manufacture. Within the broader semiconductor hierarchy, this device is an integrated circuit, a programmable-logic device and an FPGA. The Virtex-4 FX architecture targets demanding parallel processing, signal processing, networking, communications, embedded control and test-equipment designs. The XC4VFX100-10FFG1152C combines 10,544 configurable logic blocks or logic cells with 6,930,432 RAM bits. Its 576 I/Os provide substantial connectivity for high-speed data paths and external interfaces. The -10 suffix identifies the device speed grade, while the 1152-pin package supports a large number of power, ground, configuration and user-I/O connections. A 1.2 V internal supply voltage and 90 nm CMOS process are also identified for this device. The architecture combines programmable logic with substantial block RAM and dedicated hardware resources, allowing multiple parallel datapaths to be implemented without relying on a processor for real-time control. Its 1028 MHz maximum internal frequency provides a headline timing figure, although practical operating performance also depends on the selected speed grade, clocking resources, I/O standards, routing demand, power characteristics and PCB implementation. Typical applications include high-speed network interface equipment, telecom and industrial control systems, instrumentation, signal processing, test and measurement platforms, embedded vision systems and communications infrastructure. The 576-I/O count is particularly useful for designs requiring parallel data acquisition, multiple high-speed interfaces or extensive external memory connectivity. Board design must account for the FCBGA-1152 footprint, controlled-impedance routing, multilayer power distribution, thermal management, decoupling and FPGA-specific configuration requirements. Differential pairs and high-speed interfaces should be routed with the reference-plane geometry and matching practices specified in the manufacturer’s design documentation. This page organizes the device’s core FPGA, logic, memory, I/O, package, temperature and process information into an engineering-focused format, together with drop-in ordering options, comparison parameters and practical selection guidance for Virtex-4 FX designs.

RFQ צור קשר