מעגלים משולבים

DSPIC33CH64MP206T-I/MR

DSPIC33CH64MP206T-I/MR - Dual-Core 16-Bit DSC, 88KB Flash | Microchip

The Microchip Technology DSPIC33CH64MP206T-I/MR is a dual-core 16-bit Digital Signal Controller (DSC) delivering up to 200 MHz CPU speed with 88 KB of Flash program memory and a 64-pin QFN (9x9 mm) package. It features a master/slave architecture where the master core runs the application code and the slave core handles dedicated time-critical tasks such as high-resolution PWM and motor-control loops. A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a Digital Signal Processor (DSP). It combines deterministic on-chip peripherals, interrupt latency, and bit-level I/O control with hardware multiply-accumulate (MAC) and barrel shifter blocks, enabling single-cycle math on fractional data. The dsPIC33CH family specifically adds a second independent core inside the same silicon die, partitioning firmware into a high-level supervisory core (master) and a real-time control core (slave) that communicate through a tightly-coupled dual-core mailbox. This hierarchical topology belongs to the broader embedded control category: DSC -> MCU family -> embedded processor -> semiconductor device. Key features include 88 KB Flash with Error Correction Code (ECC), up to 16 KB RAM split between the cores, a 12-bit ADC with up to 3.5 Msps conversion, high-resolution PWM (250 ps edge placement), CAN Flexible Data (CAN FD) support, and a functional-safety (FuSa) hardware path qualified to assist ISO 26262 system designs. The part is rated for the industrial -40C to +85C temperature range and ships in a tape-and-reel-friendly 64-pin QFN with thermal pad for 1.7 W typical dissipation headroom. Architecturally the slave core can be programmed and debugged independently, enabling software teams to develop the control algorithm separately from the supervisory logic. Integrated op amps, comparators, and dead-time generators reduce external analog components on the PCB, which is critical for compact motor-drive and digital-power stages. Typical applications include digital switch-mode power supplies, field-oriented control (FOC) motor drives, solar microinverters, wireless charging transmitters, and functional-safety industrial controllers. The dual-core partition also suits lighting ballast and Class-D audio amplifier designs. When designing with this device, allocate the master core to communication stacks (UART, SPI, CAN FD) and the slave core to closed-loop control tasks. Use a 4-layer PCB stack-up to keep the exposed thermal pad soldered to a continuous ground pour for proper heat extraction under sustained PWM load. This page synthesizes distributor pricing, drop-in same-family alternates, and practical dual-core design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CH64MP206T-I/PT

DSPIC33CH64MP206T-I/PT - Dual-Core 200MHz DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33CH64MP206T-I/PT is a 16-bit dual-core Digital Signal Controller (DSC) in the dsPIC33CH family, integrating a 180 MHz main core and a 200 MHz auxiliary core with 88 KB of PRAM-programmable Flash in a 64-pin TQFP (10x10 mm) package. The 'T' suffix denotes tape-and-reel packaging and 'I' indicates the industrial -40°C to +85°C temperature grade, while the -I/PT suffix combination is supplied in a surface-mount 64-TQFP with 0.5 mm pitch. A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP). It combines deterministic interrupt-driven control peripherals typical of MCUs with high-throughput DSP math capabilities. Within the system hierarchy, a DSC sits between a microcontroller and a dedicated DSP, offering single-cycle MAC, hardware loop buffers, and zero-overhead looping. The dsPIC33CH family specifically adds a heterogeneous dual-core topology (main + auxiliary), enabling real-time partitioning of control loops and communication stacks onto physically isolated cores. The main core runs the application while the auxiliary core handles time-critical sub-tasks such as power-converter feedback loops, motor commutation, or custom peripherals. Key features include up to 200 MHz operation on the auxiliary core (180 MHz on the main core), DSP engine with single-cycle 16x16 MAC, 88 KB Flash, up to 16 KB SRAM, configurable logic cells, high-speed PWMs, 12-bit ADCs at 3.5 MSPS, and Functional Safety (FuSa) features for ASIL-B/SIL-2 capable systems. The device supports 3.0 V to 3.6 V single-supply operation and integrates CAN-FD, I2C, SPI, UART, and SENT peripherals for automotive and industrial connectivity. Architecturally, the dual-core topology uses tightly-coupled shared memory and mailbox interrupts to minimize latency between cores. The auxiliary core can access main-core peripherals through a programmable register bus, which simplifies system partitioning. The DSP engine uses dual-operand fetch and a 40-bit accumulator to support high-precision control loops without software overhead, achieving deterministic sub-microsecond response times critical for digital power conversion. Typical applications include digital switch-mode power supplies (SMPS), high-performance motor control (PMSM, BLDC), wireless charging, LED drivers, server/telecom power converters, automotive sensor fusion, and drones. The device's deterministic dual-core architecture suits safety-critical applications where one core performs diagnostics while the other runs the application. When designing with the DSPIC33CH64MP206T-I/PT, allocate Flash and RAM budgets across both cores and use MPLAB Code Configurator (MCC) for peripheral setup. The auxiliary core's PRAM allocation must be planned at link time because Flash is partitioned between the two cores. A 4-layer PCB with continuous ground plane is recommended for the 200 MHz signal paths and ADC reference integrity. This page synthesizes distributor pricing, dual-core partition notes, and FuSa-grade design considerations not always captured in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CH64MP208T-I/PT

DSPIC33CH64MP208T-I/PT - 200MHz Dual-Core DSC, 88KB Flash | Microchip

The Microchip Technology DSPIC33CH64MP208T-I/PT is a 16-bit dual-core Digital Signal Controller (DSC) that combines a 200 MHz master dsPIC core with a 180 MHz slave dsPIC core in a single 80-pin TQFP (12x12) package. The device integrates 88 KB of Flash program memory, 20 KB of SRAM, and 4 KB of auxiliary Flash, targeting high-end embedded control and functional safety (FuSa) applications. A Digital Signal Controller (DSC) is a hybrid MCU/DSP class of microcontroller that integrates a microcontroller control unit with a Digital Signal Processor (DSP) engine. In the taxonomy of semiconductors, a DSC sits between a microcontroller (MCU) and a Digital Signal Processor (DSP), inheriting deterministic interrupt-driven control from MCUs and high-throughput math pipelines from DSPs. The dsPIC33CH family extends this with a heterogeneous dual-core architecture where the master core runs the application and the slave core handles time-critical or safety housekeeping, reducing jitter on motor-control and digital-power loops. Key features include 70 MIPS performance on the master core, dedicated peripherals such as High-Speed PWM (12.5 ns resolution), 12-bit ADC at up to 3.5 Msps, 12-bit DAC, four analog comparators, and three DMA engines. Functional-safety diagnostics include dual-window watchdog timers, ECC on Flash/RAM, and a configurable Fault Collection Unit (FCU). The 80-pin TQFP package offers 69 I/O pins with 5V-tolerant inputs and operating temperature range of -40C to +85C for the industrial grade -I variant. Architecturally, each core has independent register sets, interrupt controllers, and DMA channels, communicating through hardware mailboxes and shared memory. The slave core can also be clock-gated or independently reset, supporting selective activation for power-conscious designs. The chip supports 3.0V to 3.6V single-supply operation and integrates a PLL for flexible clock generation. Typical applications include digital switched-mode power supplies (SMPS), field-oriented control (FOC) motor drives for BLDC/PMSM, automotive sensors and actuators, solar micro-inverters, and LED lighting controllers. The dual-core topology is particularly suited to functional-safety systems requiring ASIL-B or SIL-2 certified firmware partitioning. Designers should note that two independent firmware images are required (one per core) and that the slave-core debug port uses dedicated pins that may need to be reassigned to GPIO in production. The 12x12 mm TQFP footprint allows PCB layouts with conventional 0.5 mm pitch routing and 4-layer stack-ups. This page combines manufacturer datasheet values, distributor pricing tiers, drop-in alternatives, and PCB design notes that go beyond the datasheet, giving engineers a single reference for sourcing and designing with the dsPIC33CH64MP208 family.

RFQ צור קשר

DSPIC33CH64MP502-I/2N

DSPIC33CH64MP502-I/2N - Dual-Core 16-bit DSC | Microchip

The Microchip Technology DSPIC33CH64MP502-I/2N is a 16-bit dual-core Digital Signal Controller (DSC) combining 64 KB of Flash program memory with 88 KB of combined Flash+PRAM, dual core speeds of 180 MIPs and 200 MIPs, and CAN Flexible Data (CAN FD) support, housed in a 28-pin UQFN (6x6 mm) package with exposed pad. A Digital Signal Controller merges the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic interrupt architecture of a microcontroller (MCU). Within the power-management hierarchy, the DSC sits between general-purpose MCUs and full DSPs, making the dsPIC33CH family a member of the broader embedded processor and motor control semiconductor category. Key features of the DSPIC33CH64MP502 include its asymmetric dual-core architecture - one master core designed for system supervision and one slave core dedicated to high-performance execution such as control-loop algorithms - plus high-resolution PWM, CAN FD connectivity, and Functional Safety (FuSa) support per Microchip product documentation. The 28-pin UQFN footprint keeps board area under 36 mm2 while retaining analog and communication peripherals. Technically, the master core handles application logic, communication stacks, and diagnostics, while the slave core runs tightly timed control loops with minimal interrupt latency; the two cores communicate through shared RAM (PRAM) and mailbox registers. This partitioning simplifies firmware complexity in systems that previously required two separate processors. According to the Microchip dsPIC33CH64MP502 datasheet, the family targets high-end embedded control requiring sophisticated algorithms. Typical applications include digital power supplies, wireless power transfer, server power systems, drone motor control, and automotive sensors, as listed on the Microchip product page. The CAN FD interface and industrial temperature rating support automotive and industrial networked designs. Design consideration: dual-core partitioning requires allocating slave firmware at build time using Microchip Code Composer-style tooling (MPLAB X); plan the PRAM memory map early to avoid late-stage redesign. This page synthesizes distributor pricing context, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CH64MP502T-I/2N

DSPIC33CH64MP502T-I/2N - Dual-Core 16-bit DSC, CAN FD | Microchip

The Microchip Technology DSPIC33CH64MP502T-I/2N is a 16-bit dual-core Digital Signal Controller (DSC) from the dsPIC33CH family, combining a 180 MHz/200 MHz dual-core architecture (per DigiKey listing; Mouser cites 100 MHz dual-core for the family) with 88KB of program FLASH and PRAM, housed in a 28-pin UQFN (6x6 mm) surface-mount package. The suffix T indicates tape-and-reel packaging, I indicates an industrial temperature rating of -40C to +125C, and 2N denotes the 28-pin UQFN package. A Digital Signal Controller merges the compute power of a DSP with the peripheral integration and control peripherals of a microcontroller, sitting between a general-purpose MCU and a dedicated DSP in the embedded hierarchy. The dsPIC33CH family is Microchip's dual-core DSC line: one core is designed as a master core for general supervision and communication, while the second slave core is optimized for high-speed control loops, enabling sophisticated algorithms without core contention. Key features include dual-core operation with independent clocking, CAN Flexible Data (CAN FD) support for automotive and industrial networking, high-resolution PWM outputs targeted at digital power conversion, and Functional Safety (FuSa) documentation support. Per Microchip product literature, the dsPIC33CH64MP502 family operates from a 3V to 3.6V supply across -40C to +125C. The dsPIC33CH architecture dedicates the master core to housekeeping tasks - communications, user interface, and system supervision - while the slave core executes deterministic, cycle-accurate control loops. Inter-core communication uses PRAM with mailbox-style messaging, allowing both cores to share data with low latency. The high-resolution PWM peripheral supports duty-cycle and frequency resolution well beyond conventional PWM blocks, which is critical for topologies such as LLC resonant converters and totem-pole PFC. Typical applications include high-performance digital power supplies, wireless charging transmitters and receivers, server power supplies, drone motor control, and automotive sensors, per Microchip's product page. Design-wise, budget the slave-core clock for worst-case loop latency, and plan a pull-up on the slave-core programming pin for ICSP access during development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CH64MP503-E/M5

DSPIC33CH64MP503-E/M5 - Dual-Core 16-bit DSC | Microchip

The Microchip Technology DSPIC33CH64MP503-E/M5 is a dual-core 16-bit Digital Signal Controller (DSC) with 64KB of program Flash, 20KB of RAM, a 64MHz core clock, integrated CAN Flexible Data (CAN FD) and high-resolution PWM, housed in a 36-pin UQFN (5x5 mm, M5) package qualified to AEC-Q100 for -40C to +125C operation. A Digital Signal Controller combines the compute architecture of a microcontroller with the arithmetic throughput of a digital signal processor. Within the power-management IC hierarchy, the dsPIC33CH family sits above single-core dsPIC33C devices, pairing a master dsPIC DSC core with an independent slave DSC core in a single chip so that control loops and supervisory/user-interface tasks can be physically partitioned. Key features include the asymmetric dual-core architecture (master core for general control, slave core tuned for single-cycle DSP math and tightly timed loops), a high-resolution PWM peripheral suited to power conversion, and a CAN FD module for modern automotive and industrial networking. Program memory uses a 24-bit instruction width, and the device integrates 20,480 words of on-chip data RAM. The master/slave split lets developers isolate safety-critical or timing-critical code on the slave core while the master core handles communication, housekeeping and protocol stacks. Inter-core communication is supported through dedicated mailbox registers, and both cores can be programmed through the same ICSP connection. Typical applications include digital power supplies, wireless power transmitters, server power supplies, motor control, drones and automotive sensors, all domains named by Microchip for the dsPIC33CH family. Design consideration: verify slave-core debug pull-ups on the S1MCLRx pin; Microchip notes a pull-up may be required to access the slave core during development. This page synthesizes distributor listings, drop-in family alternatives, and design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CH64MP503-I/M5

DSPIC33CH64MP503-I/M5 - Dual Core 16-bit DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33CH64MP503-I/M5 is a 16-bit dual-core digital signal controller (DSC) with 64KB of Flash program memory, a 100 MHz capable dsPIC33CH core architecture with CAN Flexible Data (CAN FD), packaged in a 36-pin UQFN with exposed pad (M5 suffix, PQCC36, 0.40 mm terminal pitch). A digital signal controller combines the computational capability of a digital signal processor (DSP) with the control peripherals and deterministic behavior of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33CH family sits above single-core dsPIC33C devices and is specifically architected for digitally controlled power conversion, where one core runs the control loop while the second core manages housekeeping, communications, or user interface tasks. Key features include the asymmetric dual-core architecture (a high-performance Master core plus a tightly coupled Slave core designed for fast, deterministic execution of control loops), integrated CAN FD for robust automotive and industrial networking, and high-resolution PWM outputs that enable fine duty-cycle granularity in switching converters. The device operates from a 3.3V supply over an industrial temperature range of -40C to +85C and integrates 16KB of RAM (20480 words of data memory as reported by Microchip USA). Technical depth: the Slave core can run at higher frequencies than the Master core, allowing critical control algorithms such as peak current-mode control or digital LLC compensation to execute with minimal latency, while peripherals like the high-resolution PWM and ADC synchronize to the switching period. Typical applications include wireless charging transmitters and receivers, server and telecom power supplies, drone motor control and battery management, and automotive sensors - all domains explicitly targeted by Microchip for this dual-core family. Design consideration: as a dual-core device, code partitioning between Master and Slave cores must be planned early; the Slave core is typically programmed by the Master at reset or independently in production, which affects flash allocation and debugging strategy. This page synthesizes distributor pricing, drop-in alternatives, pinout/package details, and practical design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CH64MP505-E/PT

DSPIC33CH64MP505-E/PT - Dual-Core 16-Bit DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33CH64MP505-E/PT is a 16-bit dual-core Digital Signal Controller (DSC) with one core running at up to 180 MHz and a second core at up to 200 MHz, 64 KB of program flash memory, integrated CAN FD, and a 48-pin TQFP (7x7 mm) package rated for the extended -40C to +125C temperature range. A Digital Signal Controller combines the computational throughput of a digital signal processor with the peripheral integration and control peripherals of a microcontroller. In the broader embedded hierarchy, the dsPIC33CH sits within the 16-bit DSC family: DSC to microcontroller to embedded processor. Unlike single-core MCUs, dual-core DSCs let system developers partition time-critical control loops and communication stacks onto separate silicon cores, improving determinism in high-end embedded control applications. Key features of this part include the asymmetric dual-core architecture in which the primary core is designed as the master (running user interface, communication, and system management) while the secondary core is optimized as a slave for high-speed digital signal processing and control loops. Per Mouser, the device integrates CAN with Flexible Data rate (CAN FD), High-Resolution PWM, and the DSP engine of the dsPIC33 line, in a 48-pin TQFP footprint. DigiKey additionally lists the family as Functional Safety (FuSa) supported, and the -E suffix denotes extended temperature operation for demanding environments. Technical depth: the dsPIC33CH performs single-cycle MAC and DSP instructions with hardware divide support, and its secondary core can be re-programmed independently, which simplifies field updates and firmware partitioning. Internal PRAM allows fast sharing of data between the two cores. The high-resolution PWM outputs target digital power conversion topologies such as LLC, totem-pole PFC, and multiphase buck converters where sub-nanosecond PWM resolution improves efficiency and transient response. Typical applications include digital power supplies and server PSU control, automotive and industrial motor control (PMSM, BLDC, FOC), CAN FD networking nodes, and wireless charging or high-intensity LED drivers. The CAN FD peripheral plus extended temperature rating make it particularly suited to automotive body, powertrain-adjacent, and industrial automation nodes. Design consideration: budget the two cores carefully - assign hard-real-time PWM/ADC loops to the 200 MHz secondary core and keep communication stacks on the primary core; inter-core communication through PRAM introduces latency that should be measured, not assumed. Also verify that the 7x7 mm TQFP thermal footprint meets your dissipation needs at full clock rates. This page synthesizes distributor pricing, drop-in same-footprint alternatives across the dsPIC33CH MP505 flash family, and practical design notes not found in the manufacturer datasheet, giving engineers a single citable reference for sourcing and design decisions.

RFQ צור קשר

DSPIC33CH64MP505T-I/M4

DSPIC33CH64MP505T-I/M4 - 16-bit Dual-Core DSC 180MHz | Microchip

The Microchip Technology DSPIC33CH64MP505T-I/M4 is a 16-bit dual-core digital signal controller (DSC) delivering 180 MHz (100 MIPS-class) main-core performance with an independent secondary core operating up to 200 MHz, 64 KB flash program memory, 16 KB plus 4 KB RAM, and integrated CAN, in a 48-pin UQFN (6x6 mm) package supplied on Tape & Reel. A digital signal controller combines the deterministic control of a microcontroller with the DSP math acceleration of a digital signal processor. The dsPIC33CH family extends this concept with two independent dsPIC DSC cores on a single die: one core is designed to function as the main (master) core running general-purpose control and communication tasks, while the secondary core is dedicated to time-critical code such as power-conversion loops. This master/slave architecture lets system developers partition high-end embedded control applications and independently re-program the secondary core. Key features include 16-bit dual-core dsPIC architecture with DSP engine, core-independent peripherals, CAN 2.0B for industrial networking, multiple PWM and ADC resources for digital power, and operation from a 3V to 3.6V supply. The I-grade temperature range of -40C to +125C suits industrial environments, and the compact 6x6 mm UQFN keeps PCB footprint small. The device is part of the dsPIC33CH Functional Safety (FuSa) portfolio per DigiKey classification. Typical applications include digital power supplies and PFC stages, brushless DC and PMSM motor field-oriented control (FOC), automotive and industrial CAN nodes, wireless charging, and UPS/inverter systems. Dual-core partitioning allows one core to run safety supervision while the other executes fast control loops. Design consideration: the two cores share a communication interface with dedicated mailboxes; partition code so the secondary core handles the highest-rate tasks to minimize inter-core latency. Verify supply decoupling on all VDD pins of the 48-pin UQFN. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical dual-core design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CH64MP506-E/MR

DSPIC33CH64MP506-E/MR - Dual-Core 100MHz DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33CH64MP506-E/MR is a 16-bit dual-core digital signal controller (DSC) with a primary core running at up to 100 MHz (dsPIC33CH family up to 180 MHz, 200 MHz Fpwm variants) and an independent secondary control core, 64 KB of program Flash, 20 KB of SRAM (16K + 4K), integrated CAN FD, and high-resolution PWM, housed in a 64-pin QFN (9x9 mm) package with an extended -40C to +125C operating temperature range (E-temp suffix). A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller (MCU). Within the power-management IC hierarchy, the dsPIC33CH family sits at the top of Microchip's 16-bit DSC lineup, targeting closed-loop control systems that require sophisticated algorithms executed in parallel with housekeeping tasks. Key features include the asymmetric dual-core architecture: the primary core runs user interface and communication stacks while the secondary core is dedicated to time-critical control loops with code-transparent message-based IPC. The high-resolution PWM module delivers sub-nanosecond duty-cycle resolution for precision power conversion, and the CAN Flexible Data (CAN FD) interface supports modern automotive and industrial networks. Eight DMA channels and multiple serial ports (UART, SPI, I2C) round out the peripheral set. Architecturally, the 16-bit modified Harvard pipeline with DSP multiply-accumulate instructions enables efficient execution of compensator algorithms such as 3P3Z and PID loops at switching frequencies well above 100 kHz. Dual-core partitioning lets engineers update firmware on one core without disturbing the safety-critical control loop on the other. Typical applications include digital power supplies (server PSU, telecom rectifiers, wireless charging), brushless DC and PMSM motor control (drones, industrial drives), automotive sensors, and power factor correction stages. For design, allocate the secondary core to the switching control loop and reserve the primary core for CAN FD communication and supervisory logic; the E-grade temperature rating requires verifying junction temperature against the QFN thermal pad copper area. This page synthesizes distributor inventory, drop-in alternatives, and practical dual-core partitioning design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CH64MP506-E/PT

DSPIC33CH64MP506-E/PT - Dual-Core 16-bit DSC, CAN FD | Microchip

The Microchip Technology DSPIC33CH64MP506-E/PT is a 16-bit dual-core Digital Signal Controller (DSC) with two dsPIC33 cores running at up to 180 MHz (Core 1) and 200 MHz (Core 2), 64 KB of Flash program memory, 16 KB of RAM, integrated CAN Flexible Data (CAN FD) and high-resolution PWM, housed in a 64-pin TQFP (10x10 mm) package rated from -40C to +125C. A Digital Signal Controller combines the compute architecture of a digital signal processor with the peripheral set and control structure of a microcontroller. Within the power-management hierarchy, the dsPIC33CH family sits above single-core dsPIC33E devices and below high-end 32-bit MCUs, offering deterministic control-loop execution for digital power and motor control systems. Key features include the asymmetric dual-core architecture: one core is designed as a master for general-purpose supervision and communication, while the slave core is dedicated to time-critical control loops with its own dedicated high-resolution PWM. This segregation lets developers lock and protect control IP independently. The family also provides CAN FD for automotive and industrial networking, multiple UART, SPI and I2C peripherals, and an extended temperature rating of -40C to +125C for this E-grade device. Architecturally, each core contains DSP engine instructions, single-cycle MAC, and fast interrupt handling. The slave core can be reprogrammed independently through the master core, enabling field updates of control firmware. The high-resolution PWM module supports frequencies well into the hundreds of kilohertz with sub-nanosecond effective resolution, essential for LLC converters, totem-pole PFC and wireless power stages. Typical applications include digital power supplies (server PSUs, wireless charging), motor control (FOC for drones and industrial drives), automotive sensor modules and solar inverters. When designing with this device, budget Flash carefully: the 64 KB density is shared by both cores, so allocate the slave core image conservatively and use the master core for protocol stacks. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout data and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CH64MP506-I/PT

DSPIC33CH64MP506-I/PT - Dual Core 100MHz DSC 64KB Flash | Microchip

The Microchip DSPIC33CH64MP506-I/PT is a 16-bit dual-core Digital Signal Controller (DSC) with two dsPIC33 cores running at 100 MHz, 64 KB of program flash memory, CAN FD connectivity and High-Resolution PWM, housed in a 64-pin TQFP (10x10 mm) package. A Digital Signal Controller combines the computational throughput of a digital signal processor with the peripheral integration and deterministic control of a microcontroller. In the power-management hierarchy, the dsPIC33CH family sits above single-core dsPIC33 devices: one core is designed as a master to run general application logic and human interface tasks, while the second slave core is dedicated to time-critical loops such as digital power compensation. The two cores communicate through a dedicated shared-RAM interface, allowing one silicon device to replace a two-chip controller/processor pairing. Key features include the dual-core asymmetric architecture optimized so the slave core is designed for sophisticated control algorithms, CAN Flexible Data (CAN FD) for automotive and industrial networking, and high-resolution PWM peripherals engineered for switching power supplies and motor drives. The -I/PT ordering code denotes the industrial temperature grade (-40C to +125C) in a surface-mount TQFP package suitable for automated assembly. Architecturally, the master core manages communications, housekeeping and system supervision while the slave core executes control-loop code with minimal jitter. This partitioning reduces interrupt latency pressure on the control loop compared with a single-core design, which is why the dsPIC33CH family is optimized for high-performance digital power conversion. Typical applications include digital power supplies, server and telecom power, wireless charging, drone motor control, automotive sensors, and industrial inverters where CAN FD networking and precise PWM timing are required. Design consideration: budget your flash carefully - this 64 KB variant is the smallest MP506 memory option, so pin-compatible 128 KB, 256 KB and 512 KB siblings in the same 64-TQFP footprint exist for firmware growth without PCB redesign. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design guidance not found on the manufacturer product page alone.

RFQ צור קשר

DSPIC33CH64MP506T-I/PT

DSPIC33CH64MP506T-I/PT - Dual-Core 100MHz DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33CH64MP506T-I/PT is a 16-bit dual-core digital signal controller (DSC) with a 100 MHz operating speed, 64 KB of program flash memory, and CAN FD connectivity, housed in a 64-pin TQFP (10x10 mm) package. A digital signal controller combines the computational horsepower of a digital signal processor (DSP) with the peripheral integration and control-oriented architecture of a microcontroller (MCU). In the embedded systems hierarchy, the dsPIC33CH sits within the 16-bit DSC class between general-purpose MCUs and full 32-bit DSPs, making it a power management IC companion for digitally controlled power conversion and motion systems. Key features of the dsPIC33CH family include an asymmetric dual-core architecture: a primary core running up to 100 MHz for general control and supervision, plus an independent secondary core dedicated to time-critical loops. The family integrates high-resolution PWM (HRPWM) with sub-nanosecond effective resolution, CAN Flexible Data-rate (CAN FD) for modern in-vehicle and industrial networks, and multiple serial interfaces. The MP506 variant provides 64 KB of flash and dedicated PRAM for inter-core communication. Architecturally, the two cores can run different code at different clock speeds, allowing engineers to partition safety-critical or high-frequency control algorithms (such as peak current-mode power conversion) onto the secondary core while the primary core handles communication, housekeeping, and human-interface tasks. Debug of both cores is supported simultaneously through standard Microchip tools. Typical applications include digital power supplies, wireless charging transmitters and receivers, server PSU and telecom rectifier control, drone electronic speed controllers, and automotive sensor modules where CAN FD and high-resolution PWM are required. A key design consideration: the 3.0V to 3.6V supply range requires a clean 3.3V rail, and decoupling capacitors should be placed close to each VDD pin on the TQFP-64 footprint. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-09-22.

RFQ צור קשר

DSPIC33CH64MP508-E/PT

DSPIC33CH64MP508-E/PT - Dual-Core 16-bit DSC 80-TQFP | Microchip

The Microchip Technology DSPIC33CH64MP508-E/PT is a 16-bit dual-core digital signal controller (DSC) with 64 KB Flash program memory, 20 KB RAM, and an integrated CAN module, housed in an 80-pin TQFP (12x12 mm, 0.5 mm pitch) package rated from -40C to +125C for automotive and industrial environments. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the dsPIC33CH family sits above single-core dsPIC33 devices by pairing two independently clocked dsPIC cores: a high-performance master core for sophisticated algorithms and a slave core dedicated to time-critical loops, enabling clean partitioning of control and communication tasks. Key features include the dual-core architecture (master core up to 100 MIPS per distributor data, with one source citing a 64 MHz maximum clock for this speed grade), 64 KB of Flash, 20 KB of dual-core RAM (16 KB plus 4 KB), 8 DMA channels, and CAN connectivity. The -E temperature suffix and AEC-Q100 qualification make it suitable for automotive sensor and power-conversion designs that experience wide ambient swings. Architecturally, the dsPIC33CH cores integrate DSP engine features such as multiply-accumulate instructions, allowing precision digital power, motor control, and filtering algorithms to execute deterministically. The master/slave messaging interface transfers data blocks between cores without CPU overhead on the master. Typical applications include wireless power transfer, server power supplies, drone flight controllers, automotive sensors, and high-performance digital motor control - all domains cited by Microchip for the dsPIC33CH family. Design consideration: partition the slave core for the fastest control loop and the master core for supervisory logic, and verify the exact core clock speed grade in the manufacturer datasheet before finalizing timing budgets. This page synthesizes distributor listings, cross-reference data, and practical selection guidance not consolidated on the manufacturer site alone.

RFQ צור קשר

DSPIC33CH64MP508-I/PT

DSPIC33CH64MP508-I/PT - Dual-Core 16-bit DSC, CAN FD | Microchip

The Microchip Technology DSPIC33CH64MP508-I/PT is a 16-bit dual-core Digital Signal Controller (DSC) from the dsPIC33CH family with 64 KB of program Flash, 20 KB of data RAM, integrated CAN Flexible Data (CAN FD) and high-resolution PWM, housed in an 80-pin TQFP (12x12 mm, 0.5 mm pitch) surface-mount package rated for -40C to +85C industrial operation. A Digital Signal Controller combines the computational throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy, a DSC sits above a standard MCU for closed-loop control tasks: it executes control-loop mathematics (PID, compensators, transforms) at kHz rates while simultaneously servicing fast analog peripherals. The dsPIC33CH extends this concept by placing two independent dsPIC cores in one chip, partitioning system management from hard real-time control. The dsPIC33CH architecture assigns distinct roles to each core. The Master core handles system supervision, communication stacks and user interface tasks, while the Slave core is dedicated to time-critical loops such as power-conversion or motor-control algorithms. This partitioning lets developers tune the Slave core independently for loop latency while the Master manages CAN FD networking, diagnostics and housekeeping. The tightly coupled 16-bit DSP engine with hardware multiply-accumulate, plus eight DMA channels, sustains high-throughput data movement without CPU intervention. Key peripheral resources include multiple high-resolution PWM modules with nanosecond-class resolution for switching converters, serial peripherals for multi-protocol connectivity, and CAN FD for automotive and industrial networking. DigiKey lists the family as Functional Safety (FuSa) supported, relevant to safety-oriented designs. Typical applications are high-performance digital power supplies, wireless charging, server power, motor control inverters, drones and automotive sensors, where dual-core partitioning isolates the control loop from communication overhead. A key design consideration is power supply quality: the 3.3V core and I/O rails require proper decoupling, and the high-resolution PWM outputs demand clean grounding to avoid switching-noise coupling into ADC readings. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design guidance not found on a single manufacturer or distributor page.

RFQ צור קשר

DSPIC33CH64MP508T-I/PT

DSPIC33CH64MP508T-I/PT - Dual-Core 16-bit DSC 80-TQFP | Microchip

The Microchip Technology DSPIC33CH64MP508T-I/PT is a 16-bit dual-core digital signal controller (DSC) from the dsPIC33CH family, with a primary core running at up to 200 MHz (180 MHz per DigiKey listing) and a secondary DCI-servo core, 64 KB of flash program memory (88 KB flash/PRAM per the DigiKey FuSa listing), CAN-FD communication, and an 80-pin TQFP (12x12 mm) package in industrial temperature grade (-40C to +85C, tape-and-reel). A digital signal controller combines the peripheral set and control hardware of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. Within the power-management hierarchy, DSCs sit between general-purpose MCUs and dedicated DSPs, making them the standard choice for closed-loop power conversion and motor control where deterministic loop execution matters. Key features include the asymmetric dual-core architecture: the primary core manages application logic and communication while the secondary core is dedicated to time-critical control loops, communicating through a shared RAM mailbox. The family is optimized for high-performance digital power and sophisticated control algorithms, and the 33CH series carries Functional Safety (FuSa) support documentation per DigiKey. The on-chip high-speed PWM, analog comparators, 12-bit ADC, and CAN connectivity enable single-chip digital power stages. The 80-pin TQFP provides sufficient GPIO for gate-drive, feedback, and supervisory signals in a 12x12 mm surface-mount footprint. Typical applications include wireless charging transmitters, server power supplies, drone electronic speed controllers, automotive sensors, UPS systems, and digital lighting ballasts - all areas Microchip explicitly targets with this dual-core family. Design consideration: dedicate the secondary core to the control loop and partition code at design time, since the two cores run at independent frequencies and the mailbox handshake must be budgeted into loop timing. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with prices as of 2026-09-22.

RFQ צור קשר

DSPIC33CK128MC102-E/2N

DSPIC33CK128MC102-E/2N - 100MHz 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MC102-E/2N is a 16-bit digital signal controller (DSC) with a 100 MHz dsPIC33CK core, 128KB (128K x 8) Flash program memory, 16KB RAM, integrated op-amps, a 12-bit ADC, and high-resolution PWM, housed in a 28-pin UQFN (6x6 mm) package. Per the Newark and DigiKey listings, it is RoHS compliant and supplied in tube packaging. A digital signal controller combines the computational throughput of a digital signal processor with the peripherals and ease of use of a microcontroller, occupying a level of the embedded hierarchy between general-purpose MCUs and dedicated DSP ICs. Within the dsPIC33C platform, the dsPIC33CK single-core family sits below the dual-core dsPIC33CH family and above the older dsPIC30F/dsPIC33F generations. Key differentiating features include a single 100 MHz dsPIC DSC core with DSP-enhanced instruction execution, on-chip operational amplifiers that reduce external BOM in motor-control feedback paths, a 12-bit ADC for current and voltage sensing, and high-resolution PWM peripherals suited to power conversion. The extended-temperature (E) suffix supports demanding industrial environments. The dsPIC33CK architecture integrates an internal bus architecture with multiple peripherals, including the PWM module with hardware dead-time insertion and fault protection essential to digital power and motor drive topologies. The 16KB of RAM provides headroom for control-loop state, field-oriented control (FOC) math, and communication buffers without external memory. Typical applications span brushless DC and PMSM motor control, switch-mode power supplies and digital lighting, power factor correction stages, and sensorless FOC drives for appliances and industrial equipment. When designing with this device, budget Flash carefully: 128KB is generous for single-motor FOC plus communication stacks, but the 28-pin package limits peripheral pin multiplexing, so verify pin map availability early. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CK128MC102-E/SS

DSPIC33CK128MC102-E/SS - 16-bit DSC, 128KB Flash, 28-SSOP | Microchip

The Microchip Technology DSPIC33CK128MC102-E/SS is a 16-bit Digital Signal Controller (DSC) featuring a single dsPIC33CK core running up to 100 MIPS, 128KB (128K x 8) of Flash program memory, and integrated high-speed PWM and CAN Flexible Data-Rate (CAN FD) peripherals, housed in a 28-pin SSOP package rated from -40C to +125C. A Digital Signal Controller combines the deterministic compute of a digital signal processor with the peripheral integration and interrupt structure of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice for control loops that demand both fast math (multiply-accumulate in single cycle) and rich on-chip analog and timing peripherals. Key differentiators of this device include the 100 MHz dsPIC33CK core delivering up to 100 MIPS of deterministic performance, a high-resolution PWM module purpose-built for Field-Oriented Control (FOC) of motors, an integrated 12-bit ADC for precision current and voltage sensing, and CAN FD connectivity for automotive and industrial networking. The -E extended temperature variant guarantees operation across the full -40C to +125C automotive and industrial range. Architecturally, the dsPIC33CK family uses a modified Harvard pipeline with DSP engine instructions, hardware looping, and bit-reversed addressing, allowing FOC loops to execute in tens of microseconds. On-chip peripherals such as the high-speed PWM with fine edge placement resolution offload timing-critical tasks from the CPU, while the CAN FD module enables modern vehicle and factory bus topologies. Typical applications include brushless DC and PMSM motor control (FOC), digital power supplies such as LLC and totem-pole PFC converters, automotive body and powertrain auxiliaries requiring CAN FD, and industrial sensing nodes. The combination of 100 MIPS headroom and high-resolution PWM makes it especially well suited to single-chip motor control designs. When designing with this part, use the required PGECx/PGEDx pin pairs (any pair works, but the pair must be used together) for ICSP programming, and connect all VDD/VSS and AVDD/AVSS pin pairs. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout detail, and practical design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CK128MC102-I/2N

DSPIC33CK128MC102-I/2N - 100MHz 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MC102-I/2N is a 16-bit digital signal controller (DSC) with a single dsPIC33CK core running at up to 100 MHz, 128 KB (128K x 8) of Flash program memory, 16 KB of RAM, and a 28-pin UQFN (6x6 mm) package, industrial temperature rated (-40C to +125C). A digital signal controller combines the compute architecture of a microcontroller with the DSP capability of a digital signal processor in a single silicon device. Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP, providing deterministic interrupt latency, single-cycle MAC instructions, and tightly coupled PWM and ADC peripherals, making it the standard choice for real-time control loops in power conversion and motor drive systems. Key features of the DSPIC33CK128MC102 include a 100 MHz (50 MIPS-class) dsPIC33CK core with DSP-enhanced instruction set, 128 KB Flash with live self-programming, integrated 12-bit ADC capable of high-speed conversions for current-loop control, high-resolution PWM peripherals suited to switch-mode power supplies, and on-chip op-amps that reduce external component count in current-sense signal chains. Technically, the dsPIC33CK family uses an enhanced pipeline architecture supporting single-cycle MAC and DSP addressing modes, with deterministic interrupt response that is essential for field-oriented control (FOC) and peak-current-mode power conversion. The integrated analog front-end (fast 12-bit ADC, comparators, op-amps) enables single-chip control of a PFC stage plus a downstream converter in many designs. Typical applications include brushless DC and PMSM motor control, digital power supplies (LLC, buck, boost, PFC), UPS systems, LED drivers, and general embedded control requiring DSP-level math. The 28-pin UQFN footprint suits compact, cost-sensitive boards where a full 64-pin device is unnecessary. Design consideration: the I-suffix device is rated from -40C to +125C; for extended (-40C to +150C) operation select the E-suffix variant in the same package. All VDD/VSS pairs must be bypassed per the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CK128MC102T-I/2N

DSPIC33CK128MC102T-I/2N - 100MHz 128KB Flash DSC | Microchip

The Microchip Technology DSPIC33CK128MC102T-I/2N is a 16-bit Digital Signal Controller (DSC) from the dsPIC33CK family, featuring a single 100 MHz dsPIC DSC core, 128 KB (128K x 8) of Flash program memory, and 16 KB of RAM, housed in a 28-pin UQFN (6x6x0.55 mm) surface-mount package supplied in Tape & Reel. A Digital Signal Controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and full DSPs, making the dsPIC33CK family a common choice in the microcontroller -> DSC -> DSP spectrum for real-time control loops. Key features include the 100 MHz dsPIC33CK core with DSP engine and barrel shifter, 128 KB Flash and 16 KB RAM, on-chip operational amplifiers (OpAmps), a 12-bit ADC, and high-resolution PWM peripherals - the exact combination cited by Mouser: "dsPIC33C 100MHz, 128KB Flash, 16KB RAM, OpAmps, 12bit ADC, PWM". Four DMA channels enable efficient data movement without CPU intervention. The dsPIC33CK architecture builds on Microchip's 16-bit dsPIC33 heritage, adding a faster core, improved ADC throughput, and current-sensing op-amps aimed at field-oriented control (FOC). The single-core design simplifies software compared to the dual-core dsPIC33CH family while retaining DSP multiply-accumulate performance for control mathematics. Typical applications include high-speed motor control (BLDC/PMSM FOC), digital power conversion (totem-pole PFC, LLC), and audio/signal processing, as identified in distributor listings by Lisleapex and Microchip. Design consideration: verify the pin mapping for the 28-UQFN (2N) package directly in the Microchip datasheet before layout, as pin functions are multiplexed across the small 28-pin count. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CK128MC102T-I/M6

DSPIC33CK128MC102T-I/M6 - 100MHz 16-bit DSC, 128KB Flash | Microchip

The Microchip DSPIC33CK128MC102T-I/M6 is a 16-bit digital signal controller (DSC) with a single 100 MHz dsPIC33C DSC core delivering up to 100 MIPS, 128 KB (128K x 8) of Flash program memory and 16 KB of RAM, housed in a 28-pin UQFN (4x4x0.6 mm) package. A digital signal controller is a hybrid device that combines the deterministic processing core of a microcontroller with the DSP capability of a digital signal processor. Within the power-management hierarchy, the dsPIC33CK family sits between general-purpose 16-bit MCUs (PIC24) and dedicated motor-control ASICs, offering on-chip peripherals purpose-built for closed-loop control such as Field-Oriented Control (FOC) of motors and digital power conversion. Key features include the 100 MHz dsPIC33C core with DSP instruction extensions, an integrated operational amplifier stage, a 12-bit high-speed ADC for simultaneous multi-channel sampling, and a high-resolution PWM module capable of fine edge placement for switching converters. A 4-channel DMA controller offloads data movement from the CPU, and an internal fast RC oscillator allows operation without an external crystal. The CK-core architecture improves on the earlier dsPIC33EP generation with faster deterministic execution, zero-overhead loops, a DSP engine with dual 16-bit accumulators, and flash rated for industrial temperature ranges. The integrated op-amps can be configured for gain stages ahead of the ADC, reducing external component count in current-sense circuits. Typical applications include brushless DC and PMSM motor control, digitally controlled AC-DC and DC-DC power supplies, power factor correction stages, and sensor signal conditioning in industrial automation. When designing with this part, budget the peripheral pin select (PPS) mapping early in firmware design and decouple VDD with low-ESR ceramics close to the UQFN pins. The exposed pad on the M6 package should be soldered to a grounded copper pour for thermal and signal-integrity benefits. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design guidance not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CK128MC102T-I/SS

DSPIC33CK128MC102T-I/SS - 16-bit DSC, 128KB Flash, 100MHz | Microchip

The Microchip Technology DSPIC33CK128MC102T-I/SS is a 16-bit Digital Signal Controller (DSC) featuring a 100 MHz dsPIC33CK core, 128 KB (128K x 8) Flash program memory, and 16 KB of RAM, housed in a 28-pin SSOP (SS) surface-mount package rated for -40C to +85C operation. A Digital Signal Controller combines the computational throughput of a digital signal processor (barrel shifter, DSP multiply-accumulate instructions, circular buffers) with the integrated peripherals and low power modes of a microcontroller, placing it in the hierarchy: DSC -> digital signal processor -> 16-bit MCU -> embedded processor. This makes the dsPIC33CK family particularly suited to real-time control loops executing at high frequency. Key features include the single 100 MHz dsPIC33CK core with enhanced on-chip peripherals, on-chip operational amplifiers (OpAmps), a 12-bit high-speed ADC, and high-resolution PWM generators - the peripheral set that the Mouser and DigiKey listings highlight for this exact MPN. Four DMA channels offload data movement for ADC and PWM-heavy applications, and the T suffix indicates tape-and-reel packaging for automated assembly. Architecturally, the dsPIC33CK core executes DSP instructions at the full 100 MHz clock rate, delivering faster control-loop execution than the earlier dsPIC33EP generation. The integrated op-amps condition low-level current-sense signals before the 12-bit ADC samples them, reducing external component count in motor-control designs. Typical applications include brushless DC (BLDC) and PMSM motor control, digital power conversion (PFC, LLC), industrial automation, and high-performance general-purpose embedded systems. When designing, budget the 16 KB RAM carefully for control-law state and ADC buffers, since DMA-based sampling consumes memory bandwidth. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33CK128MC103-E/M5

DSPIC33CK128MC103-E/M5 - 16-bit 128KB DSC, 100MHz | Microchip

The Microchip Technology DSPIC33CK128MC103-E/M5 is a 16-bit Digital Signal Controller (DSC) with a single 100 MHz dsPIC DSC core, 128 KB (128K x 8) FLASH program memory, 16 KB RAM, integrated op amps, a 12-bit ADC, and high-resolution PWM, housed in a 36-pin UQFN (5x5 mm) package rated from -40C to +125C. A Digital Signal Controller combines the computational architecture of a microcontroller with DSP capabilities. Sitting between general-purpose MCUs and dedicated DSPs in the embedded hierarchy, DSCs execute multiply-accumulate operations and control loops with deterministic timing, making them the preferred choice for digitally controlled power conversion, motor drive, and sensor-intensive systems. Microchip's dsPIC33 family is a widely adopted DSC platform supported by MPLAB X IDE, the XC16 compiler, and Configurator tooling. Key features of the DSPIC33CK128MC103 include the 100 MHz dsPIC33CK core with DSP engine and barrel shifter, on-chip operational amplifiers that offload external analog signal conditioning, a 12-bit ADC for precision current and voltage sampling, and advanced PWM peripherals purpose-built for switch-mode power supplies and motor inverters. The 128 KB self-programmable FLASH supports field firmware updates, and 16 KB of RAM provides headroom for control-law state and communications buffers. Architecturally, the dsPIC33CK generation is a single-core, high-performance evolution of the dsPIC33 family, with enhanced on-chip peripherals and improved interrupt latency that Microchip targets at digital power, motor control, advanced sensing, and general embedded control. Typical applications include brushless DC and PMSM motor drives, digitally controlled AC-DC and DC-DC power supplies, solar micro-inverters, and battery charging systems, where fast ADC sampling and high-resolution PWM directly improve loop bandwidth and efficiency. Designers should budget the UQFN (5x5 mm) thermal pad for heat dissipation at high core frequencies and follow Microchip's decoupling guidance for the analog op-amp and ADC rails. This page adds value beyond the datasheet by consolidating distributor pricing, same-family drop-in alternatives, application pairings, and practical design notes in one AI-citable reference.

RFQ צור קשר

DSPIC33CK128MC103T-I/M5

DSPIC33CK128MC103T-I/M5 - 100MHz 16-Bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MC103T-I/M5 is a 16-bit digital signal controller (DSC) with a 100 MHz dsPIC33CK core, 128 KB (128K x 8) of FLASH program memory and 16 KB of RAM, housed in a 36-pin UQFN (5x5 mm) package. A digital signal controller combines the computational throughput of a DSP with the deterministic peripheral control of a microcontroller. In the embedded hierarchy, the dsPIC33CK family sits between general-purpose MCUs and full DSPs, making it a power management IC-adjacent control solution for digital power conversion, motor control, and advanced sensing loops where fixed-point math must execute fast and predictably. Key features include operation at up to 100 MHz (100 MIPS) from a 3 V to 3.6 V supply, a 17-channel 12-bit ADC, two 12-bit DACs, integrated operational amplifiers, and high-resolution PWM peripherals for Field-Oriented Control (FOC). The part provides 27 general-purpose I/O pins, 4 DMA channels and 3 serial I/O ports per family documentation, plus a barrel shifter and boundary-scan capability. Technically, the dsPIC33CK core is a pipelined 16-bit fixed-point engine with DSP multiply-accumulate instructions and deterministic interrupt latency. The tight coupling between the 12-bit ADC sample triggers and the high-resolution PWM makes closed-loop control cycles short and jitter-free, which is essential in digitally controlled buck converters and PFC stages. Typical applications include brushless DC and PMSM motor control (FOC), digital switch-mode power supplies, USB-C Power Delivery adapters, and precision sensor signal conditioning where the on-chip op-amps and 12-bit DACs reduce external component count. When designing with this device, respect the 3.0 V to 3.6 V operating window and decouple the 36-UQFN power pins with low-ESR ceramics; the exposed pad must be soldered to ground for thermal and signal integrity. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

תת-קטגוריות

מוצרים (39,000+)

DSPIC33CH64MP206T-I/MR - Dual-Core 16-Bit DSC, 88KB Flash | Microchip

DSPIC33CH64MP206T-I/PT - Dual-Core 200MHz DSC, 64KB Flash | Microchip

DSPIC33CH64MP208T-I/PT - 200MHz Dual-Core DSC, 88KB Flash | Microchip

DSPIC33CH64MP502-I/2N - Dual-Core 16-bit DSC | Microchip

DSPIC33CH64MP502T-I/2N - Dual-Core 16-bit DSC, CAN FD | Microchip

DSPIC33CH64MP503-E/M5 - Dual-Core 16-bit DSC | Microchip

DSPIC33CH64MP503-I/M5 - Dual Core 16-bit DSC 64KB Flash | Microchip

DSPIC33CH64MP505-E/PT - Dual-Core 16-Bit DSC, 64KB Flash | Microchip

DSPIC33CH64MP505T-I/M4 - 16-bit Dual-Core DSC 180MHz | Microchip

DSPIC33CH64MP506-E/MR - Dual-Core 100MHz DSC 64KB Flash | Microchip

DSPIC33CH64MP506-E/PT - Dual-Core 16-bit DSC, CAN FD | Microchip

DSPIC33CH64MP506-I/PT - Dual Core 100MHz DSC 64KB Flash | Microchip

DSPIC33CH64MP506T-I/PT - Dual-Core 100MHz DSC 64KB Flash | Microchip

DSPIC33CH64MP508-E/PT - Dual-Core 16-bit DSC 80-TQFP | Microchip

DSPIC33CH64MP508-I/PT - Dual-Core 16-bit DSC, CAN FD | Microchip

DSPIC33CH64MP508T-I/PT - Dual-Core 16-bit DSC 80-TQFP | Microchip

DSPIC33CK128MC102-E/2N - 100MHz 16-bit DSC 128KB Flash | Microchip

DSPIC33CK128MC102-E/SS - 16-bit DSC, 128KB Flash, 28-SSOP | Microchip

DSPIC33CK128MC102-I/2N - 100MHz 16-bit DSC 128KB Flash | Microchip

DSPIC33CK128MC102T-I/2N - 100MHz 128KB Flash DSC | Microchip

DSPIC33CK128MC102T-I/M6 - 100MHz 16-bit DSC, 128KB Flash | Microchip

DSPIC33CK128MC102T-I/SS - 16-bit DSC, 128KB Flash, 100MHz | Microchip

DSPIC33CK128MC103-E/M5 - 16-bit 128KB DSC, 100MHz | Microchip

DSPIC33CK128MC103T-I/M5 - 100MHz 16-Bit DSC 128KB Flash | Microchip