מעגלים משולבים

DSPIC33EP512GP504T-I/PT

DSPIC33EP512GP504T-I/PT - 16-bit DSC 512KB Flash 70MIPS | Microchip

The Microchip Technology DSPIC33EP512GP504T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP general-purpose family, delivering 70 MIPS performance, 512KB (170K x 24) of Flash program memory, 48KB of RAM, and a 44-pin TQFP (10x10 mm) package operating from a 3.3V supply. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and ease of use of a microcontroller. In the system hierarchy, DSCs sit between general-purpose microcontrollers and dedicated DSP chips, offering single-cycle MAC instructions and DSP engine support alongside standard MCU peripherals such as UART, SPI, I2C, and CAN. The dsPIC33EP family is Microchip's high-performance 16-bit DSC generation built around an enhanced dsPIC33E core. Key features of this device include the 70 MIPS dsPIC33E core with DSP instruction extensions, integrated CAN 2.0B module for industrial networking, on-chip operational amplifiers and comparators that reduce external component count in analog signal chains, and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. The T suffix denotes tape-and-reel packaging, and the I suffix indicates the industrial temperature rating. Technically, the enhanced flash architecture supports self-programming and the device integrates a high-performance ADC with multiple sample-and-hold circuits suitable for precision motor control and power conversion feedback loops. The CTMU (Charge Time Measurement Unit) enables capacitive touch and time-based measurements. Typical applications include motor control drives, digital power supplies, industrial automation nodes using CAN, sensor fusion and conditioning systems leveraging the on-chip op amps, and general-purpose embedded control requiring DSP-level math throughput. When designing with this device, plan the 3.3V power rail decoupling carefully and reserve the Peripheral Pin Select (PPS) mapping early, since pin functions are software-assigned. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512GP504T-I/TL

DSPIC33EP512GP504T-I/TL - 16-bit 70 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP504T-I/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP general purpose family, delivering up to 70 MIPS performance with 512KB (170K x 24) of FLASH program memory and 48KB (24K x 16) of RAM, housed in a 44-pin VTLA (6x6 mm) QFN package with exposed pad. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, a DSC sits above a general-purpose MCU for math-intensive control loops such as digital power conversion, motor control, and sensing, making the dsPIC33EP family a bridge between classic PIC microcontrollers and dedicated DSPs. Key features include the 70 MIPS dsPIC33E core, hardware DSP engine with accumulators and fractional multiply support, CAN 2.0B connectivity, and up to four DMA channels that offload data movement from the CPU. According to the Microchip product page, the family offers superior ADC performance, CTMU (Charge Time Measurement Unit) for capacitive touch and time measurement, integrated op amps and comparators, and the Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. Technically, the device operates from a 3.0V to 3.6V supply with a maximum supply current around 55mA, uses CMOS process technology, and supports boundary scan (JTAG) debug. The 512KB self-programmable flash with ECC supports field firmware updates, while five 16-bit timers and flexible clocking (internal PLL from crystal or internal FRC) enable precise timing control in closed-loop systems. Typical applications include digital power supplies (PFC, LLC), BLDC/PMSM motor control, industrial sensing and instrumentation, and CAN-based automotive or industrial nodes, where the combination of DSP math throughput and CAN connectivity directly reduces external component count. A key design consideration: the I-temperature grade covers -40C to +85C; for -40C to +125C automotive environments choose the E-grade variant DSPIC33EP512GP504T-E/TL in the same footprint. Decouple VDD/VDDCORE per the power-up sequencing requirements in the reference manual to avoid brown-out reset issues. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with price data as of 2026-09-25.

RFQ צור קשר

DSPIC33EP512GP506-H/PT

DSPIC33EP512GP506-H/PT - 16-bit DSC 70 MIPS 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP506-H/PT is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 512 KB (170K x 24) Flash program memory and 48 KB RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package. A digital signal controller is a hybrid device that combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller. DSCs sit within the broader hierarchy of embedded processors - microcontroller unit (MCU) family, digital signal controller subfamily, digital signal processor category, and semiconductor - and are used where deterministic control loops and math-intensive signal processing must coexist in a single chip. Key features of this general purpose (GP) family member include integrated operational amplifiers and comparators (per Microchip product data: 'Op Amps, Comparators'), a high-speed PWM module for motor control and power conversion, a CAN 2.0B controller for industrial networking, and the Peripheral Trigger Generator (PTG) for autonomous hardware-task scheduling. Operating voltage is 3.3V, and the -H suffix denotes the extended temperature variant of the standard industrial part. Architecturally, the dsPIC33E core executes DSP instructions such as multiply-accumulate (MAC) with a hardware barrel shifter and dual address generation, achieving 70 MIPS peak throughput. The single-supply on-chip regulator simplifies power design, and boundary-scan/JTAG-style programming via ICSP interfaces to MPLAB X IDE and the MPLAB Snap or ICD 3/4 programmers. Typical applications include BLDC and PMSM motor control (using the high-speed PWM), digital power supplies and inverters, industrial automation nodes with CAN bus, and sensor signal conditioning leveraging the on-chip op amps before the ADC pipeline. Design consideration: the -H temperature option differs from the -I option in operating range; confirm the required grade before qualifying alternates, and verify that the 64-TQFP footprint (0.5 mm lead pitch) and pin assignment match when swapping family variants. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512GP506-I/MR

DSPIC33EP512GP506-I/MR - 70MIPS 512KB DSC VQFN-64 | Microchip

The Microchip Technology DSPIC33EP512GP506-I/MR is a 16-bit Digital Signal Controller (DSC) delivering 70 MIPS performance with 512 KB of Flash program memory and 48 KB of RAM, housed in a 64-pin VQFN (MR, 9x9 mm) package with exposed pad and industrial temperature rating of -40C to +85C. A Digital Signal Controller combines the deterministic control flow of a microcontroller with the multiply-accumulate throughput of a DSP engine, sitting between a general-purpose MCU and a dedicated DSP in the embedded processor hierarchy. This makes the dsPIC33E family well suited to closed-loop control systems such as digital power conversion, motor control, and sensor signal conditioning where both fast math and rich peripherals are required. Key features include the 16-channel 10/12-bit ADC with up to 1.1 Msps conversion rate, integrated op amps and comparators, high-speed PWM with complementary outputs and dead-time control, CAN 2.0B for industrial networking, and the Charge Time Measurement Unit (CTMU) for capacitive touch and precision time measurement. The Peripheral Trigger Generator (PTG) automates ADC sampling sequences, offloading the CPU. The dsPIC33EP core features a modified Harvard architecture with a 17x17-bit hardware multiplier, 40-bit barrel shifter, two 40-bit accumulators and dual-DSP multiply-accumulate in a single cycle. IEEE 1149.2 (JTAG) boundary scan, in-circuit programming (ICSP), and two program/complex data breakpoints support development and production test. Typical applications include brushless DC and PMSM motor drives, digital SMPS and PFC stages, UPS systems, industrial automation nodes, and sensor acquisition front ends. The 53 general-purpose I/O pins provide ample connectivity for gate drivers, relays and communication buses. Design consideration: power the device from a 3.0 V to 3.6 V rail, place the on-chip regulator capacitor (VCAP) close to its pin, and budget flash endurance at 100 erase/write cycles per Microchip's datasheet when implementing in-application programming. This page synthesizes distributor pricing, drop-in family alternatives, pinout data, and practical design notes not found together in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512GP506T-E/MR

DSPIC33EP512GP506T-E/MR - 60 MIPS 16-bit DSC | Microchip

The Microchip Technology DSPIC33EP512GP506T-E/MR is an AEC-Q100 qualified 16-bit digital signal controller (DSC) from the dsPIC33EP general purpose family, delivering up to 60 MIPS core performance with 512KB (170K x 24) of FLASH program memory, 24KB to 48KB of RAM depending on data source, in a 64-pin VQFN (9x9 mm) exposed-pad package operating at 3.3V over the extended -40C to +125C temperature range. A digital signal controller combines the deterministic interrupt architecture and peripheral set of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP: it runs real-time control loops (current loops, sensor fusion, digital power conversion) while also managing communication stacks and application logic on a single chip. Key features of this device include the dsPIC33E 16-bit core with DSP instruction extensions, CAN 2.0B communication, on-chip operational amplifiers and comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) that automates ADC triggering sequences without CPU intervention. The ADC subsystem provides the superior analog performance the dsPIC33E GP family is known for, enabling precise motor control and sensor-sampling applications. Architecturally, the device uses a modified Harvard pipeline with 24-bit-wide instructions, DSP multiply-accumulate hardware, and divide support. The wide FLASH word (170K x 24) improves code density for DSP-heavy routines, and the MR suffix denotes the 64-VQFN (9x9) exposed-pad package whose thermal pad improves junction-to-ambient performance for automotive-grade operation. Typical applications include automotive body and powertrain subsystems, brushless DC and PMSM motor control, digital power supplies (PFC and LLC stages), and industrial sensing nodes that need CAN connectivity with on-chip analog signal conditioning. For design, plan MCLR/ICSP programming access and decouple all VDD/VSS pin pairs with 0.1uF ceramics placed directly at the pins; the exposed pad must be soldered to a grounded copper pour for full thermal and EMC performance. This page synthesizes distributor data, drop-in alternatives, and engineering design notes beyond what the manufacturer datasheet provides.

RFQ צור קשר

DSPIC33EP512GP506T-I/PT

DSPIC33EP512GP506T-I/PT - 16-bit DSC 512KB Flash 64-TQFP | Microchip

The Microchip Technology DSPIC33EP512GP506T-I/PT is a 16-bit Digital Signal Controller (DSC) with a 70 MIPS dsPIC33E core, 512 KB of Flash program memory and 48 KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. The tape-and-reel suffix (T) supports automated high-volume assembly, and the I suffix denotes industrial temperature operation from -40C to +85C. A Digital Signal Controller combines the deterministic control of a microcontroller with the math throughput of a DSP. In the power-management hierarchy, the DSC sits above general-purpose MCUs (PIC16/PIC18 families) and complements general-purpose digital signal processors, making it the natural choice for closed-loop control loops executing PID and filtering algorithms in real time. Key differentiating features of the dsPIC33EP512GP506 family include the highest-speed 70 MIPS core in the dsPIC33E general-purpose line, superior ADC performance, integrated CAN 2.0B communication for industrial and automotive networking, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-domain measurements, and the Peripheral Trigger Generator (PTG) that automates peripheral sequencing and offloads the CPU. Integrated op amps and comparators further reduce external analog component count. Architecturally, the device uses a 16-bit modified Harvard core with DSP engine instructions (MAC, dual operand fetch), high-speed PWM capability, and 24-bit-wide instruction words with 170K x 24 program word addressing, which the Microchip USA listing confirms as 512KB Flash (170K x 24). Code density and deterministic interrupt latency make it suitable for tight control loops at full 70 MIPS operation. Typical applications include digital power supplies, motor control (BLDC, PMSM, ACIM), inverters and solar converters, industrial automation nodes on CAN bus, and sensing systems exploiting the CTMU. The integrated op amps condition current-shunt feedback directly, shortening the analog signal chain. Design considerations: run the device from a 3.0V-3.6V supply, keep VDD/VSS decoupling close to each supply pair, and verify 5V-tolerant pin usage per the family datasheet when interfacing legacy logic. Migration within the dsPIC33EP512GP50x family preserves the PCB footprint. This page synthesizes distributor availability data, drop-in family alternatives, and design guidance not consolidated in the manufacturer datasheet. Pricing as of 2026-09-25.

RFQ צור קשר

DSPIC33EP512GP806-E/MR

DSPIC33EP512GP806-E/MR - 60 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip DSPIC33EP512GP806-E/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP general purpose family, delivering 60 MIPS core performance with 512KB (170K x 24) of Flash program memory and 53KB (53248 bytes) of RAM, housed in a 64-pin VQFN (9x9 mm, MR) package rated from -40C to +125C. A digital signal controller combines the compute architecture of a microcontroller with DSP-capable instruction support in a single chip, sitting in the system hierarchy between a general-purpose MCU and a dedicated DSP. DSCs such as the dsPIC33EP family are widely used where deterministic control loops and math-intensive signal processing must coexist, such as motor control, digital power conversion, and embedded sensing. Key features of this device include the highest-speed 70 MIPS-class dsPIC33E core (clocked at 60 MIPS in the standard configuration), dual CAN 2.0B modules for robust industrial networking, an 8-bit parallel master port that simplifies graphic display interfacing, and integrated high-performance analog peripherals. Per distributor listings, the device provides 53 general-purpose I/O pins and operates from a 3.0V to 3.6V supply. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with DSP multiply-accumulate and divide instructions, providing strong code density and real-time responsiveness. The family datasheet (622 pages) documents high-speed PWM, advanced analog integration, and extensive serial connectivity (UART, SPI, I2C, dual CAN), allowing a single controller to close control loops and manage fieldbus communication concurrently. Typical applications include industrial automation nodes with dual CAN buses, motor control and digital power supplies leveraging the DSP engine and PWM peripherals, and HMI/display products using the parallel master port. The extended temperature range (-40C to +125C) suits harsh industrial and automotive-adjacent environments. Design consideration: this device is reported to be more sensitive to cross-talk on the PGEC/PGED programming lines than other PIC devices; adding a small (approx. 20 pF) capacitor from PGEC to VSS close to the chip improves debugger connectivity, per Northern Software engineering notes. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, providing unique selection value for engineers.

RFQ צור קשר

DSPIC33EP512GP806-I/MR

DSPIC33EP512GP806-I/MR - 16-bit DSC 70 MIPS 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP806-I/MR is a 16-bit digital signal controller (DSC) delivering 70 MIPS core performance with 512KB (170K x 24) of flash program memory and 53,248 bytes of RAM, housed in a 64-pin VQFN (9x9 mm) package with industrial temperature range (-40C to +85C). A digital signal controller combines the deterministic control structure of a microcontroller with the mathematical throughput of a digital signal processor. In the embedded system hierarchy, the dsPIC33E family sits between general-purpose 16-bit MCUs and full DSPs, making it well suited for closed-loop control applications that also require math-intensive algorithms such as PID, filters, and transforms. Key features include two independent ADC modules: one configurable as 10-bit, 1.1 Msps with four sample-and-hold circuits, or 12-bit, 500 ksps with one sample-and-hold; a second 10-bit, 1.1 Msps ADC with four sample-and-hold inputs. Combined, the two modules support eight sample-and-hold circuits using both 10-bit modules. The 64-pin device provides up to 24 analog channels with flexible and independent ADC trigger sources, plus up to three analog comparators. The GP (general purpose) family also integrates enhanced CAN communication and an 8-bit parallel master port for easier graphic display interfacing, alongside high-speed PWM output, making it a strong fit for motor control, digital power conversion, and industrial networking nodes. Typical applications include sensorless BLDC and PMSM motor control, switched-mode power supplies and digital lighting, industrial CAN networking gateways, and graphic-display-equipped control panels. The dual CAN capability allows bridging of two CAN buses on a single chip. Design consideration: Microchip documentation notes that all VDD and VSS pins must be connected for programming to succeed, and this device is more sensitive to cross-talk between PGEC and PGED programming lines than other PIC devices; route these traces short and away from aggressors. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes beyond the raw manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512GP806-I/PT

DSPIC33EP512GP806-I/PT - 70 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP806-I/PT is a 16-bit general purpose Digital Signal Controller (DSC) that integrates a 70 MIPS dsPIC33E core, 512 KB of Flash program memory, and 53,248 bytes of SRAM in a 64-pin TQFP (10x10 mm) industrial-temperature package. A Digital Signal Controller (DSC) combines the computational capability of a Digital Signal Processor (DSP) with the peripheral integration and programming simplicity of a microcontroller (MCU). In the semiconductor taxonomy, the dsPIC33E family sits between general-purpose 16-bit MCUs and dedicated DSPs, offering single-cycle MAC, hardware divide, and DSP-style addressing while retaining standard MCU peripherals such as UART, SPI, I2C, timers, and PWM. This dual identity lets engineers implement closed-loop control and signal processing on a single chip without a separate DSP. Key features include dual CAN 2.0B controllers for industrial networking, a Data Converter Interface (DCI) for audio codec connection, three analog comparators, a Real-Time Clock and Calendar (RTCC), and a Parallel Master Port (PMP) that simplifies 8-bit parallel graphic display interfacing. The enhanced Peripheral Pin Select (PPS) system allows remapping of many digital peripherals onto flexible RPn pins, dramatically improving board-level routing. Architecturally, the dsPIC33E core executes most instructions in a single cycle at up to 70 MIPS, with optimized C compiler support and DSP library routines for FIR/IIR filtering, FFT, and high-speed precision control loops. The integrated analog block and high-speed PWM modules support demanding embedded control designs while keeping BOM cost low. Typical applications include industrial automation, sensorless and sensored motor drives (FOC), CAN-based automotive and industrial nodes, digital audio and speech processing, and graphic-display-based HMI systems where the PMP accelerates frame-buffer writes. When designing with this device, provide proper decoupling on the internal core regulator (VCAP) pin and follow Microchip programming guidelines for PGEC/PGD pairs, which are sensitive to cross-talk. This page synthesizes distributor pricing, drop-in family alternatives, pinout references, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר

DSPIC33EP512GP806T-E/PT

DSPIC33EP512GP806T-E/PT - 16-Bit DSC 512KB 60MIPS | Microchip

The Microchip Technology DSPIC33EP512GP806T-E/PT is a 16-bit dsPIC33E Digital Signal Controller (DSC) with 512 KB (170K x 24) Flash program memory, 24 KB RAM, and a 60 MIPS dsPIC RISC core, housed in a 64-pin TQFP (10x10 mm) package. It is an AEC-Q100 automotive-grade device operating from a 3.0 V to 3.6 V supply. A Digital Signal Controller is a hybrid device that combines the real-time control peripherals and interrupt behavior of a microcontroller with the single-cycle multiply-accumulate (MAC) datapath of a digital signal processor. In the product taxonomy, a DSC sits between a general-purpose MCU and a dedicated DSP: it is a member of the microcontroller family, a subclass of embedded processors, and a component of the broader semiconductor IC category. The dsPIC33E family targets closed-loop control, digital filtering, and mixed-signal applications where deterministic latency matters more than raw throughput. The DSPIC33EP512GP806T-E/PT integrates dual CAN (CANbus) controllers, I2C, IrDA, LINbus, SPI, and UART/USART interfaces, plus DMA, PWM, and a watchdog timer (WDT). Its analog subsystem includes multiple 10-bit/12-bit ADC modules with up to 24 analog channels on 64-pin devices, sample-and-hold circuits, and up to three analog comparator modules with programmable 32-point voltage references. The 70 MIPS-class core executes digital filter algorithms and high-speed precision control loops in a single cycle per MAC. The 'T' suffix denotes tape-and-reel packaging, the 'E' suffix denotes the extended -40C to +125C temperature range, and the '/PT' suffix denotes the 64-pin TQFP (10x10) package. The automotive AEC-Q100 qualification makes this variant suitable for under-hood and body-control electronics, while the general-purpose 'GP' peripheral mix (dual CAN, rich ADC, no dedicated motor-control PWM) suits industrial gateways, sensor fusion nodes, and multi-axis control boards. Typical applications include automotive body control modules, industrial CAN gateways, digital power conversion, motor control, and instrumentation. Designers should note the 3.3 V core/supply requirement, the need for proper VDD/VSS decoupling on every supply pin pair, and the ICSP programming constraint that PGECx and PGEDx must be used as a matched pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512GP806T-I/MR

DSPIC33EP512GP806T-I/MR - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP806T-I/MR is a 16-bit dsPIC33EP general-purpose Digital Signal Controller (DSC) delivering 70 MIPS performance with 512KB (170K x 24) of Flash program memory and 53248 bytes of RAM, housed in a 64-pin VQFN (9x9 mm) package rated for -40C to +85C industrial operation. A Digital Signal Controller combines the deterministic interrupt architecture and peripherals of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the embedded systems hierarchy, the dsPIC33EP family sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice when control loops require both fast math and rich communication peripherals in a single chip. Key features include the 16-bit dsPIC33E CPU core running up to 70 MIPS with DSP instruction support, two enhanced CAN 2.0B modules for industrial and automotive networking, up to three analog comparators with 32-point programmable references, a Real-Time Clock and Calendar (RTCC), and a Parallel Master Port (PMP) that simplifies connection to graphic displays through an 8-bit parallel interface. The integrated analog subsystem provides high-performance ADC capability with 24 analog channels on 64-pin devices, flexible and independent ADC trigger sources, and support for simultaneous sampling through multiple sample-and-hold circuits. Communication coverage spans CAN, I2C, SPI, UART/USART, LINbus, IrDA, and DCI (Data Converter Interface) for audio codec connectivity. Peripheral Pin Select (PPS) allows digital peripherals to be remapped to unused physical pins, maximizing board layout flexibility. Typical applications include industrial motor control and digital power conversion ( exploiting the DSP engine and high-speed PWM), CAN-based automotive and industrial gateways (leveraging the dual CAN modules), and graphic-display human-machine interfaces driven through the PMP port. Design consideration: the T-suffix indicates Tape-and-Reel delivery; ensure your pick-and-place supports 9x9 mm QFN land patterns with exposed thermal pad, and plan decoupling of the multiple VDD/VSS pin pairs per Microchip layout guidelines. This page synthesizes distributor availability data, pin-compatible alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512GP806T-I/PT

DSPIC33EP512GP806T-I/PT - 16-bit DSC 70 MIPS 512KB | Microchip

The Microchip DSPIC33EP512GP806T-I/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS core performance with 512 KB (536 KB per some listings) of Flash program memory, 52 KB (53,248 bytes) of RAM, and dual CAN 2.0B controllers, housed in a 64-pin TQFP (10x10 mm) package. It belongs to the dsPIC33EP512GP806 general-purpose family of Digital Signal Controllers. A digital signal controller combines the computing power of a DSP core with the peripheral integration and ease of use of a microcontroller. In the system hierarchy, the dsPIC33EP family sits between general-purpose MCUs (such as the PIC24) and dedicated DSPs, executing digital filter algorithms, high-speed precision control loops, and digital audio/speech processing at up to 70 MIPS. Key features include the highest-speed 70 MIPS dsPIC33E core with excellent code density, superior ADC performance, enhanced dual CAN communication, an 8-bit parallel master port (PMP) for graphic display interfacing, RTCC real-time clock/calendar, DCI data converter interface for audio codecs, and three analog comparators. Peripherals also cover I2C, SPI, UART/USART, IrDA, and LINbus connectivity with DMA support. The 16-bit modified Harvard architecture executes two instructions per cycle at 3.3 V. The industrial temperature grade (-40C to +85C, suffix -I) suits harsh environments, and the T suffix denotes tape-and-reel packaging for automated assembly. Typical applications include motor control, industrial automation, digital power supplies, and CAN-networked automotive-adjacent systems. Design considerations: connect all VDD/VSS pins per the datasheet, since missing supply pins can cause programming failures on this family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512MC202-E/MM

DSPIC33EP512MC202-E/MM - 16-bit 60 MIPS DSC, 512KB Flash | Microchip

The Microchip DSPIC33EP512MC202-E/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC family, delivering 60 MIPS of computation with 512 KB (170K x 24) of Flash program memory and 48 KB of RAM in a 28-pin QFN-S (6x6 mm) package with an exposed thermal pad, rated for -40C to +125C operation. What is a digital signal controller? A DSC combines a microcontroller's deterministic peripherals and interrupt architecture with a digital signal processor's single-cycle MAC and DSP pipeline, occupying the design tier between a 16-bit MCU and a discrete DSP. In the semiconductor hierarchy a DSC sits within microcontrollers -> 16-bit MCUs -> DSP-enhanced MCUs, with motor-control and power-conversion as its two flagship applications. The dsPIC33E generation specifically targets precision closed-loop control where high-resolution PWM, on-chip analog front ends, and rotor-position feedback all converge in a single chip. Key features include a 60 MIPS dsPIC DSC core with 24-bit instruction word and dual-operand fetch, three pairs of complementary MCPWM outputs with programmable dead time and 7.14 ns PWM resolution, a quadrature encoder interface (QEI) for rotor position sensing, integrated operational amplifiers and analog comparators that absorb the analog front end of current-sense loops, a Peripheral Trigger Generator (PTG) that sequences ADC and PWM events without CPU intervention, plus 4 KB of EEPROM-like data Flash and 12-bit ADC with 1.1 Msps throughput. The QFN-S package's central exposed pad carries thermal dissipation and the ground reference. Architecturally, the part operates from 3.0 V to 3.6 V (3.3 V nominal), uses single-cycle multiply-accumulate for DSP kernels, and supports both ICSP and JTAG programming along with self-programming for field firmware updates. AEC-Q100 grade-1 thermal range (-40C to +125C) enables under-hood and industrial use. Typical applications include field-oriented control of PMSM and BLDC motors, digital PFC and LLC converters, UPS inverters, solar microinverters, and automotive auxiliary motor drives. Design consideration: a 3.3 V LDO with tight tolerance is mandatory because the core voltage window is narrow; the QFN's exposed pad must be soldered to a continuous ground pour that doubles as a thermal path. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EP MC family, and practical design notes that complement - not replace - the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512MC202-E/SO

DSPIC33EP512MC202-E/SO - 70 MIPS 16-bit DSC | Microchip

The Microchip Technology DSPIC33EP512MC202-E/SO is a 16-bit digital signal controller (DSC) with a dsPIC33E core running up to 70 MIPS, 512 KB of Flash program memory and 48 KB of RAM, housed in a 28-pin SOIC (7.50 mm width) package rated for -40C to +125C operation. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. In the system hierarchy, the dsPIC33EP512MC202 sits within Microchip's dsPIC33 family of DSCs, which in turn belongs to the broader class of 16-bit embedded microcontrollers and semiconductor integrated circuits. DSCs are distinguished from general-purpose MCUs by integrated DSP engine instructions, hardware multiply-accumulate units, and motor-control-oriented peripherals. Key features of this part include the 70 MIPS dsPIC DSC core with DSP instruction support, 512 KB of on-chip Flash (24-bit program memory width) and 48 KB of SRAM, a multi-phase motor control PWM (MCPWM) module, and a quadrature encoder interface (QEI) for closed-loop servo feedback. The -E suffix denotes the extended automotive-relevant temperature range of -40C to +125C, suitable for harsh industrial and underhood environments. Architecturally, the device uses a modified Harvard bus structure with a multiple internal bus architecture, separating program and data paths so instruction fetch and data access overlap for deterministic DSP throughput. The high-speed PWM supports complementary outputs, dead-time insertion, and fault protection, which are essential for field-oriented control of brushless DC and permanent-magnet synchronous motors. Typical applications include precision sensorless FOC motor drives, industrial power conversion such as solar inverters and digital UPS systems, and embedded control in HVAC compressors, e-bikes, and servo amplifiers. The MCHV-2 motor-control development board from Microchip supports mounting a 28-pin SOIC dsPIC33 DSC directly for rapid prototyping. When designing with this controller, budget the peripheral pin mapping (PPS) assignments carefully on the limited 28-pin SOIC footprint, and provide a stable VDDCORE decoupling via the VCAP pin per the manufacturer datasheet. This page synthesizes verified distributor data, drop-in alternatives, pricing context, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single citable reference for the DSPIC33EP512MC202-E/SO.

RFQ צור קשר

DSPIC33EP512MC202-E/SP

DSPIC33EP512MC202-E/SP - 16-bit 60 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC202-E/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EP family with a 60 MIPS dsPIC33E core, 512KB (170K x 24) of Flash program memory, 48KB of RAM, and an extended-temperature -40C to +125C rating in a 28-pin SPDIP through-hole package. A digital signal controller combines the compute architecture of a microcontroller with DSP engine features such as multiply-accumulate instructions, dual data fetch, and modulo/bit-reversed addressing. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs and below full DSPs, offering deterministic real-time control plus math acceleration in one chip - the reason dsPIC33E devices dominate precision motor-control boards. Key features include the 16-bit dsPIC33E core with DSP and enhanced peripherals, 512KB self-programmable Flash with ECC, 48KB RAM, multiple MCPWM (motor-control PWM) modules, quadrature encoder interface (QEI), and wide 3V to 3.6V operation. The E-grade temperature suffix qualifies the part for -40C to +125C environments, and the device is listed as AEC-Q100 automotive capable per distributor parametric data. The architecture integrates a fast interrupt system, DMA, and an on-chip FRC oscillator, allowing single-chip designs for field-oriented-control (FOC) motor drives. The 24-bit instruction word improves code density versus 8-bit PICs, while hardware DSP support accelerates Clarke/Park transforms and PID loops. Typical applications include brushless DC and PMSM motor control, switched-mode power supplies, automotive body and engine-adjacent modules, and industrial automation nodes. The SPDIP package suits through-hole prototyping and serviceable industrial boards. Design consideration: the device requires a VCAP/VDDCORE capacitor on pin 27 for the internal 2.5V core regulator; place a low-ESR 10uF-class capacitor close to the pin per the Microchip datasheet. This page synthesizes distributor pricing, drop-in family alternatives, pinout detail, and design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512MC202-H/MM

DSPIC33EP512MC202-H/MM - 16-Bit 60 MIPS DSC 512KB Flash | Microchip

The Microchip DSPIC33EP512MC202-H/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC (Motor Control) family, delivering 60 MIPS performance with 512KB (170K x 24) of FLASH program memory and 48KB of RAM, housed in a 28-pin QFN-S (6x6 mm) package with exposed pad. A digital signal controller combines the computational power of a DSP with the deterministic behavior and peripheral set of a microcontroller. Within the power-management hierarchy, the dsPIC33E sits at the top of Microchip's 16-bit DSC portfolio, positioned above the PIC24 microcontroller line, and is optimized for closed-loop control loops such as field-oriented motor control, digital power conversion, and sensor processing. Key features include the 16-bit modified Harvard dsPIC core with integrated DSP multiply-accumulate instructions, dual operational amplifiers and high-speed comparators for embedded analog signal conditioning, a Motor Control PWM (MCPWM) module with complementary outputs and dead-time control, and a Quadrature Encoder Interface (QEI) for position feedback from rotary encoders. Technically, the device operates from a 3.0V to 3.6V supply at up to 60 MHz (60 MIPS), with five 16-bit timers, four DMA channels, and three external interrupt sources per Microchip USA product data. Programming is supported through In-Circuit Serial Programming (ICSP), with IEEE 1149.2-compatible JTAG boundary scan, two program and two complex data breakpoints, and trace/run-time watch debug capability. Typical applications include precision motor control for brushless DC and permanent-magnet synchronous motors, digital power supplies such as PFC and LLC converters, industrial automation drives, and high-intensity LED lighting ballasts, where the on-chip MCPWM, op amps, and QEI minimize external component count. Design consideration: the -H suffix denotes operation up to 150C ambient per distributor data; however, the 3.0-3.6V supply range requires level shifting for 5V logic interfaces, and the VCAP pin needs the datasheet-specified low-ESR capacitor for core regulation stability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512MC202-H/SO

DSPIC33EP512MC202-H/SO - 16-bit 60MIPS DSC 512KB | Microchip

The Microchip Technology DSPIC33EP512MC202-H/SO is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS from 512 KB (170K x 24) of Flash program memory and 48 KB of RAM, housed in a 28-pin SOIC package and qualified to AEC-Q100 for automotive use (-H temperature grade). A digital signal controller combines the compute architecture of a microcontroller with DSP-grade math acceleration in a single core. In the power-management hierarchy, the dsPIC33E family sits at the top of Microchip's 16-bit controller line, integrating an enhanced DSP engine, high-speed MCPWM peripherals, a quadrature encoder interface (QEI), on-chip op-amps and comparators - the full analog front end needed for closed-loop power conversion and motor control. Key features include a 16-bit RISC core with DSP instruction extensions, 512 KB self-programmable Flash with in-circuit and in-application programming, dual program breakpoints and trace, and an IEEE 1149.2-compatible JTAG boundary scan. Two pairs of PGECx/PGEDx pins support ICSP programming and debugging with any Microchip debugger. The MCPWM module generates complementary high-speed PWM outputs with dead-time control for BLDC, PMSM, ACIM and stepper motors, while the QEI decodes incremental encoder feedback directly in hardware. Integrated op-amps and comparators condition current-shunt signals without external amplifiers, reducing BOM cost and board area. Typical applications include precision motor control (FOC and trapezoidal drives), digital power supplies and PFC stages, automotive auxiliary systems requiring AEC-Q100 qualification, and industrial automation sensing nodes. The 3.3 V supply rail simplifies integration with modern automotive and industrial logic. Design consideration: choose the -H/SO grade for 125C ambient environments; the pin-compatible -I/SO variant covers -40C to +85C industrial use at lower cost. Verify that 28-pin GPIO and DMA channel counts suffice before migrating from larger dsPIC33EP packages. This page synthesizes distributor pricing context, drop-in alternatives within the dsPIC33EP MC202 family, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512MC202-I/SO

DSPIC33EP512MC202-I/SO - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC202-I/SO is a 16-bit digital signal controller (DSC) delivering 70 MIPS core performance with 512 KB of Flash memory (170K x 24) and 48 KB of RAM, housed in a 28-pin SOIC (0.295 in, 7.50 mm width) package. It belongs to the dsPIC33EP family optimized for precision motor control and digital power conversion. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic interrupt architecture of a microcontroller. Within the power-management controller hierarchy, DSCs occupy the niche between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC, DSP-engine addressing modes, and high-resolution PWM peripherals on a single chip. Key features include the dsPIC33E CPU core running at up to 70 MIPS, dual on-chip op amps, a motor control PWM (MCPWM) module with complementary outputs and dead-time control, and a quadrature encoder interface (QEI) for closed-loop servo feedback. The 512 KB self-programming Flash and 48 KB SRAM enable complex field-oriented control (FOC) algorithms and advanced observers to be executed with headroom. The MC-family peripheral set targets embedded motor and power applications: high-speed PWM with edge- and center-aligned modes, multiple 12-bit ADC channels supporting simultaneous sampling, and DSP instructions (MAC, dual operand fetch) that accelerate PI loops, transforms, and filter kernels at deterministic rates. Typical applications include BLDC and PMSM motor drives, industrial automation, digital power supplies (LLC, totem-pole PFC), power inverters, and appliance control. The I temperature grade (-40C to +85C) covers industrial environments. Design consideration: budget supply decoupling on each VDD pin and place the VCAP stabilizing capacitor per the manufacturer datasheet to guarantee core-voltage integrity at 70 MIPS operation. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing, drop-in same-package alternatives, and practical design notes in one citable resource.

RFQ צור קשר

DSPIC33EP512MC202-I/SP

DSPIC33EP512MC202-I/SP - 16-bit DSC 70 MIPS 512KB Flash | Microchip

The Microchip DSPIC33EP512MC202-I/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 70 MIPS performance, 512KB (170K x 24) of Flash program memory, and 48KB of RAM, housed in a 28-pin SPDIP through-hole package rated for industrial temperatures. A digital signal controller combines the computational architecture of a microcontroller with the DSP capability of a digital signal processor. In the product hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs: it executes a modified Harvard 16-bit core with DSP engine extensions (40-bit accumulator, single-cycle MAC, modulo and bit-reversed addressing), making it a power-management-class device for control loops that need both decision logic and fast arithmetic. Key features include the 70 MIPS dsPIC33E core, up to 85 general-purpose I/O-capable pins on this 28-pin variant, a high-speed MCPWM module purpose-built for motor control, QEI quadrature encoder interface support, and multiple UART/SPI/I2C serial channels. Per Mouser, the device integrates '16B DSC 512KB Flash 48KB RAM MCPWM QEI' resources, and per DigiKey it is classified as a dsPIC 33EP Microcontroller IC, 16-Bit, 70 MIPs, 512KB FLASH, 28-SPDIP. The dsPIC33EP architecture includes an internal fast RC oscillator with PLL for flexible clocking up to 140 MIPS-equivalent internal instruction rates, a 3.0V to 3.6V operating supply, and in-circuit serial programming (ICSP) via any PGECx/PGEDx pin pair, which simplifies field upgrades through the MPLAB Snap or ICD programmers. Typical applications are precision motor control (BLDC, PMSM, stepper), digital power supplies (PFC, LLC controllers), industrial sensing and instrumentation, and embedded audio/conditioning signal chains where PWM precision plus DSP math are required in one chip. Design consideration: keep the VCAP/VDDCORE pin capacitor per the datasheet recommendation and pair any PGECx pin with the matching PGEDx pin when wiring ICSP, since pairs cannot be mixed. This page synthesizes distributor pricing, same-footprint drop-in memory variants, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single citable reference.

RFQ צור קשר

DSPIC33EP512MC202T-E/MM

DSPIC33EP512MC202T-E/MM - 60 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC202T-E/MM is a 16-bit digital signal controller (DSC) delivering up to 60 MIPS from its dsPIC33EP core, with 512KB (170K x 24) of FLASH program memory, 24KB of RAM, and Motor Control PWM peripherals, housed in a 28-pin QFN-S (6x6 mm) package with exposed thermal pad. A digital signal controller combines the compute power of a DSP (single-cycle MAC, DSP instruction set, hardware multipliers) with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, DSCs occupy the top tier of the dsPIC33 family, positioned as microcontroller units (MCUs) optimized for closed-loop control loops such as field-oriented motor control and digital power conversion. Key features include the 16-bit dsPIC core at 60 MIPS, 512KB self-programming FLASH, DMA controller for peripheral-to-memory transfers, Motor Control PWM (MCPWM) with complementary outputs and dead-time insertion, quadrature encoder interface (QEI), input capture/output compare channels, and integrated op-amps and comparators that reduce external BOM cost in analog front ends. The dsPIC33EP architecture adds a user-programmable PTG (Pulse Train Generator), watchdog timer, power-on reset, and in-circuit/in-application programming with JTAG boundary scan (IEEE 1149.2 compatible) for production test. Two program and two complex data breakpoints support real-time debugging via the standard Microchip debugger ecosystem (PICkit, ICD, REAL ICE). Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies (PFC, LLC), solar inverters, and industrial sensor interfaces. The MCPWM and QEI peripherals are purpose-built for precision motor control where 16-bit DSP math executes each control loop within microseconds. Design consideration: the extended-temperature E suffix (-40C to +125C) is essential for automotive bays and industrial enclosures; derate maximum MIPS versus junction temperature per the manufacturer datasheet, and place low-ESR decoupling on all VDD pairs of the QFN exposed pad. This page synthesizes distributor pricing, drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512MC202T-I/MM

DSPIC33EP512MC202T-I/MM - 16-bit 70 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC202T-I/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP family with 512KB (170K x 24-bit words) of Flash program memory, 48KB (49152 words) of RAM, and a DSP-enhanced core executing up to 70 MIPS at 60 MHz, housed in a 28-terminal 6x6 mm QFN (MM) surface-mount package. A digital signal controller combines the compute architecture of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33E family sits above general-purpose 16-bit MCUs by adding hardware DSP multiply-accumulate, motor-control PWM, and quadrature encoder interface peripherals, making it a dedicated motor-control class of semiconductor device. Key features include the MCPWM motor-control PWM module, QEI quadrature encoder interface, on-chip operational amplifiers and comparators, 5 timers, 4 DMA channels, 3 external interrupts, and IEEE 1149.2-compatible JTAG boundary scan with in-circuit and in-application programming. Supply voltage spans 3.0V to 3.6V with a 3.3V nominal rail, and the industrial-grade -I temperature suffix covers -40C to +85C operation. The dsPIC DSC core integrates a DSP engine with hardware MAC, modulo and bit-reversed addressing, and dual 40-bit accumulators, allowing FIR filter and field-oriented control loops to close deterministically while C-language application code runs on the same core. The Tape-and-Reel -T suffix supports automated high-volume pick-and-place assembly. Typical applications include precision Brushed/BLDC/PMSM and stepper motor control, digital power supplies, power factor correction, and industrial automation sensors that need deterministic DSP math with rich on-chip analog. Design consideration: connect every VDD and VSS pin pair and decouple each with low-ESR ceramic capacitors, since even one unconnected power pin can cause programming and debug failures on this family. This page synthesizes verified distributor specifications, drop-in same-family alternatives, pricing context, and practical design notes not consolidated in the manufacturer datasheet alone.

RFQ צור קשר

DSPIC33EP512MC202T-I/SO

DSPIC33EP512MC202T-I/SO - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512MC202T-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC (Motor Control) family, delivering up to 70 MIPS performance from its dsPIC33E core, with 512KB (170K x 24) of FLASH program memory, housed in a 28-pin SOIC (SO) package with industrial temperature rating (-40C to +85C). A digital signal controller combines the computational architecture of a microcontroller with the multiply-accumulate DSP engine of a digital signal processor. Within the power management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for control loops that need deterministic, high-rate execution, making dsPIC33EP devices a common choice where firmware-driven precision motor control, digital power conversion, and sensor processing converge in a single chip. Key features include the 70 MIPS dsPIC33E core with integrated DSP engine, 512KB self-programmable FLASH with ECC, multiple UART/SPI/I2C communication peripherals, high-speed 12-bit ADC, and the MC family's dedicated motor-control PWM peripherals. In-circuit serial programming (ICSP) and in-application programming simplify field updates, and JTAG/IEEE 1149.2 boundary-scan support aids board-level test. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with two program and two complex data breakpoints, plus DSP instructions (MAC, dual fetch) that accelerate control-loop math such as Clarke/Park transforms in FOC motor drives. Peripherals are clocked independently, allowing ADC sampling and PWM updates to run without CPU intervention. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies (LLC, totem-pole PFC), and industrial sensing nodes that combine fast acquisition with rich communications. The MC-family PWM and ADC peripherals are purpose-built for these closed-loop, time-critical topologies. Design consideration: use a matched PGECx/PGEDx pair for ICSP (for example PGEC2 with PGED2); mixing pins from different pairs will prevent programming. This page adds information gain beyond the datasheet: verified drop-in alternatives, cross-family comparisons, and practical design notes synthesized from distributor and manufacturer data.

RFQ צור קשר

DSPIC33EP512MC204-E/PT

DSPIC33EP512MC204-E/PT - 16-bit DSC 512KB Flash 60 MIPS | Microchip

The Microchip Technology DSPIC33EP512MC204-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring 512 KB (170K x 24) of Flash memory, 48 KB of RAM, and a dsPIC DSC core running at 60 MIPS (60 MHz), housed in a 44-pin TQFP (10x10 mm) package with extended temperature operation and AEC-Q100 automotive qualification. A digital signal controller combines the computational throughput of a microcontroller with the signal-processing capability of a DSP. Within the power management hierarchy of embedded systems, a DSC such as the dsPIC33EP512MC204 sits above general-purpose MCUs for control-loop-intensive tasks, providing single-cycle multiply-accumulate (MAC) DSP instructions alongside deterministic interrupt latency that real-time closed-loop control demands. Key differentiating features include the Motor Control PWM (MCPWM) module for multi-phase inverter drive, a Quadrature Encoder Interface (QEI) for position feedback, and integrated analog: on-chip operational amplifiers and comparators that reduce external component count in motor-control front ends. The 512 KB Flash supports complex field-oriented control (FOC) firmware with headroom for OTA-style field updates. Architecturally, the dsPIC33E core is a modified Harvard architecture with a 16-bit data path, 24-bit instruction words, and a pipelined execution unit. In-circuit serial programming (ICSP) is supported through any paired PGECx/PGEDx pin pair, and all VDD/VSS pairs must be connected during programming. Typical applications include precision brushless DC and PMSM motor control, industrial automation drives, automotive auxiliary motor systems (the -E suffix designates AEC-Q100 automotive-grade screening), and power conversion such as PFC and digital UPS stages. When designing, remember the core runs from a 3.3 V supply, and the 60 MIPS rating requires the correct oscillator configuration and PLL settings; consult the oscillator section of the manufacturer datasheet. This page synthesizes drop-in same-family alternatives, parametric comparisons, and engineering design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP512MC204-E/TL

DSPIC33EP512MC204-E/TL - 60 MIPS 512KB DSC | Microchip

The Microchip Technology DSPIC33EP512MC204-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance, 512KB (170K x 24) of Flash program memory, and 48KB of RAM in a 44-pin VTLA (6x6 mm) QFN package with exposed pad. The extended-temperature E suffix is qualified to AEC-Q100 for automotive use, operating from -40C to +125C. A digital signal controller combines the compute architecture of a microcontroller with DSP capability on a single die. In the power-management hierarchy of embedded systems, a DSC such as this sits at the node between general-purpose MCUs and standalone DSPs: it runs real-time control loops (current, speed, position) while executing filtering and transform algorithms on-chip, eliminating a second processor. Key features include the dsPIC33E core with DSP engine and hardware multiply-accumulate, dedicated Motor Control PWM (MCPWM) peripherals, Quadrature Encoder Interface (QEI) inputs, integrated operational amplifiers and comparators, 35 programmable I/O pins, and 12 timers/counters. The 3.3V supply (up to 3.6V maximum) suits modern low-voltage designs. Architecturally, the dsPIC33EP core executes most instructions in a single cycle at 60 MIPS, with X and Y data memories enabling simultaneous operand fetches for MAC-class instructions. The MCPWM module generates complementary or independent PWM channels with dead-time insertion, directly driving three-phase inverter bridges for field-oriented control (FOC) of PMSM and BLDC motors. Typical applications are precision motor control (servo drives, e-bike controllers, industrial pumps), digital power supplies (PFC, LLC converters), and embedded sensing systems that benefit from the QEI plus op-amp/comparator peripherals. Design consideration: the 6x6 QFN exposed pad must be soldered to a ground pour with thermal vias; also budget Flash carefully - the 512KB density is shared across one partition with no dual-partition boot swapping on this device. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EP family, and practical design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר

תת-קטגוריות

מוצרים (39,000+)

DSPIC33EP512GP504T-I/PT - 16-bit DSC 512KB Flash 70MIPS | Microchip

DSPIC33EP512GP504T-I/TL - 16-bit 70 MIPS DSC, 512KB Flash | Microchip

DSPIC33EP512GP506-H/PT - 16-bit DSC 70 MIPS 512KB Flash | Microchip

DSPIC33EP512GP506-I/MR - 70MIPS 512KB DSC VQFN-64 | Microchip

DSPIC33EP512GP506T-E/MR - 60 MIPS 16-bit DSC | Microchip

DSPIC33EP512GP506T-I/PT - 16-bit DSC 512KB Flash 64-TQFP | Microchip

DSPIC33EP512GP806-E/MR - 60 MIPS 16-bit DSC, 512KB Flash | Microchip

DSPIC33EP512GP806-I/MR - 16-bit DSC 70 MIPS 512KB Flash | Microchip

DSPIC33EP512GP806-I/PT - 70 MIPS 16-bit DSC 512KB Flash | Microchip

DSPIC33EP512GP806T-E/PT - 16-Bit DSC 512KB 60MIPS | Microchip

DSPIC33EP512GP806T-I/MR - 16-bit 70 MIPS DSC 512KB Flash | Microchip

DSPIC33EP512GP806T-I/PT - 16-bit DSC 70 MIPS 512KB | Microchip

DSPIC33EP512MC202-E/MM - 16-bit 60 MIPS DSC, 512KB Flash | Microchip

DSPIC33EP512MC202-E/SO - 70 MIPS 16-bit DSC | Microchip

DSPIC33EP512MC202-E/SP - 16-bit 60 MIPS DSC, 512KB Flash | Microchip

DSPIC33EP512MC202-H/MM - 16-Bit 60 MIPS DSC 512KB Flash | Microchip

DSPIC33EP512MC202-H/SO - 16-bit 60MIPS DSC 512KB | Microchip

DSPIC33EP512MC202-I/SO - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

DSPIC33EP512MC202-I/SP - 16-bit DSC 70 MIPS 512KB Flash | Microchip

DSPIC33EP512MC202T-E/MM - 60 MIPS 16-bit DSC 512KB Flash | Microchip

DSPIC33EP512MC202T-I/MM - 16-bit 70 MIPS DSC, 512KB Flash | Microchip

DSPIC33EP512MC202T-I/SO - 16-bit 70 MIPS DSC 512KB Flash | Microchip

DSPIC33EP512MC204-E/PT - 16-bit DSC 512KB Flash 60 MIPS | Microchip

DSPIC33EP512MC204-E/TL - 60 MIPS 512KB DSC | Microchip