מעגלים משולבים

DSPIC33EP64MC204T-E/PT

DSPIC33EP64MC204T-E/PT - 16-bit DSC 60 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC204T-E/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS performance, 64 KB (22K x 24) of FLASH program memory, and 8 KB of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package with tape-and-reel delivery and AEC-Q100 automotive qualification. A digital signal controller combines the compute architecture of a microcontroller with DSP-grade math acceleration. In the power-management hierarchy, a DSC sits above a general-purpose MCU and beside a dedicated DSP: it executes C code, services interrupts, and drives peripherals like a microcontroller, while adding single-cycle MAC, DSP multiply/divide, and fractional arithmetic needed for real-time control loops. The dsPIC33E family is Microchip's flagship DSC platform for precision motor control and digital power conversion. Key features of this part include the 16-bit dsPIC33E core running at up to 60 MIPS from a 3.0V to 3.6V supply, 64 KB of self-programming FLASH, 8 KB of SRAM, and the MC-series high-speed PWM peripherals used for motor commutation and power topologies. The -E temperature grade supports operation down to -40C and up to +125C ambient, matching automotive under-hood and industrial drive environments. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with 24-bit instruction words, hardware DSP multiply-accumulate, DMA for peripheral data movement, multiple general-purpose timers, and advanced analog (high-speed 10/12-bit ADC with simultaneous sampling) suited to current-loop control at switching frequencies of tens of kilohertz. Typical applications include brushless DC and PMSM motor control (FOC and sensorless algorithms), digital switch-mode power supplies and PFC stages, automotive auxiliary drives, and industrial inverters where deterministic PWM update and fast ADC sampling are critical. Design consideration: the 3.0V to 3.6V supply window means 5V systems need level translation or a 3.3V rail; also verify MCLR programming and configuration-bit settings early, since oscillator and watchdog defaults affect first bring-up. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-25.

RFQ צור קשר

DSPIC33EP64MC204T-E/TL

DSPIC33EP64MC204T-E/TL - 60 MIPS 16-bit DSC, 64KB Flash | Microchip

The Microchip DSPIC33EP64MC204T-E/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS performance from a 3.0V to 3.6V supply, with 64KB (22K x 24) Flash program memory and 8KB RAM, housed in a 44-pin VTLA QFN package (6x6 mm) with exposed pad and extended temperature range of -40C to +125C. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP. In the power-management hierarchy, the dsPIC33EP family sits within Microchip's 16-bit MCUs and DSCs, targeting real-time control loops where a general-purpose MCU lacks multiply-accumulate throughput and a standalone DSP lacks integrated peripherals. Key features include a high-speed 16-bit MCPWM module with dedicated time bases for motor control, a quadrature encoder interface (QEI) for position feedback, three on-chip operational amplifiers and four comparators that reduce external analog component count, four DMA channels, and a Peripheral Trigger Generator (PTG). The -E suffix denotes AEC-Q100 qualification for the automotive temperature grade. The dsPIC33EP core uses an enhanced 16-bit architecture with DSP instruction support (MAC, MPY, and dual operand fetch), enabling single-cycle multiply-accumulate operations essential for field-oriented control, digital power conversion, and sensor signal processing. Fabricated in CMOS, the device offers low-power modes for battery-sensitive designs. Typical applications include brushless DC and PMSM motor control, switch-mode power supplies, digital lighting ballasts, and automotive auxiliary control modules. When designing, budget decoupling (0.1uF per VDD pin plus bulk capacitance) and respect the 3.6V absolute supply maximum; the on-chip op amps can buffer shunt signals but external gain networks still determine accuracy. This page synthesizes distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC204T-I/ML

DSPIC33EP64MC204T-I/ML - 70 MIPS 16-Bit DSC 64KB Flash | Microchip

The Microchip DSPIC33EP64MC204T-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance with 64 KB (22K x 24) of Flash program memory and 8 KB of SRAM in a 44-pin QFN (8x8 mm, 0.65 mm pitch) surface-mount package. It operates from a 3.0 V to 3.6 V supply and integrates high-speed PWM, advanced analog peripherals, and DSP engine instructions. A digital signal controller combines the computational throughput of a digital signal processor with the control peripherals and deterministic interrupt architecture of a microcontroller. In the system hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33EP family a popular choice for embedded control loops that require math-intensive processing such as field-oriented motor control and digital power conversion. Key features include the 70 MIPS dsPIC33E core, up to 27 general-purpose timers per the family datasheet (five hardware timers on this device), four DMA channels, and the high-speed PWM module that enables precise motor-control and power-supply waveforms without CPU-intensive bit banging. The 44-QFN (8x8) footprint conserves board area versus the 44-TQFP (10x10) alternative while keeping 0.65 mm lead pitch hand-solderable. Architecturally, the dsPIC33E core uses a modified Harvard pipeline with DSP multiply-accumulate instructions, two 40-bit accumulators, and a dedicated address generation unit. Flash-based program memory supports in-circuit self-programming, and the peripherals attach to multiple internal bus architectures for parallel data movement through DMA. Typical applications include brushless DC and PMSM motor control, digital power supplies and PFC stages, sensorless FOC drives, and industrial automation nodes where deterministic PWM timing is essential. Design consideration: the 3.0-3.6 V supply rail means 5 V sensor signals require level shifting, and the QFN exposed pad must be soldered to a grounded copper pour for both thermal relief and signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC204T-I/MV

DSPIC33EP64MC204T-I/MV - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC204T-I/MV is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance with 64KB (22K x 24) of Flash program memory and 8KB of RAM, housed in a 48-pin UQFN (6x6 mm) exposed-pad surface-mount package. A digital signal controller combines the computational capability of a digital signal processor (DSP) with the integrated peripherals and control architecture of a microcontroller. Within the power management hierarchy, DSCs such as the dsPIC33EP family sit at the intersection of general-purpose MCUs and dedicated DSPs, making them a common choice for closed-loop control systems where fast math and rich peripherals must coexist on a single chip. Key features of the DSPIC33EP64MC204T-I/MV include a 16-bit dsPIC33E core, motor control PWM (MCPWM) modules, and Quadrature Encoder Interface (QEI) inputs - the defining peripherals of the MC (Motor Control) variant. The device operates from a 3V to 3.6V supply across an industrial temperature range of -40C to +85C, and integrates multiple DMA channels and timer resources for efficient data movement and event sequencing without CPU overhead. Architecturally, the dsPIC33E core pairs the 16-bit MCU instruction set with DSP engine features such as multiply-accumulate operations, enabling real-time control algorithms like field-oriented control (FOC) for motors. The enhanced Flash program memory is organized in 24-bit instruction words, and the exposed-pad UQFN-48 package provides short die-to-PPCB thermal and electrical paths for high-frequency switching applications. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, digital power supplies (AC/DC and DC/DC converters with digital loop compensation), power inverters, and industrial automation nodes requiring precise PWM generation and encoder feedback. A key design consideration: supply voltage must remain within the 3.0V to 3.6V window; decouple the VDD pins with low-ESR ceramics close to the package, and use the exposed thermal pad as a low-inductance ground connection. Clock configuration via PLL should be validated against the 70 MIPS ceiling in the datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-09-25.

RFQ צור קשר

DSPIC33EP64MC204T-I/PT

DSPIC33EP64MC204T-I/PT - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC204T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 64 KB (22K x 24) of Flash program memory and 8 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and deterministic behavior of a microcontroller. Within the power management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes single-cycle MAC and DSP instructions while providing motor-control-grade peripherals, making the dsPIC33E family a common choice for real-time closed-loop control. Key features of the DSPIC33EP64MC204T-I/PT include a 16-bit dsPIC CPU core with DSP-enhanced instruction set, 64 KB of self-programmable Flash, and 8 KB of on-chip RAM. It integrates high-speed MCPWM (motor control PWM), a Quadrature Encoder Interface (QEI) for position feedback, 3 on-chip operational amplifiers, 4 analog comparators, and 4 DMA channels. Connectivity covers I2C, SPI, UART/USART, IrDA, and LINbus. The device operates from a 3.0V to 3.6V single supply with an industrial temperature range of -40C to +85C (I suffix). Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with a 24-bit instruction word and dual data read in a single cycle, enabling FIR/IIR filtering and field-oriented control (FOC) loops at rates impossible on standard 8-bit MCUs. The PTG (Pulse Train Generator) provides hardware sequencing without CPU intervention, offloading timing-critical tasks. Typical applications include brushless DC and PMSM motor control drives, digital power supplies (PFC, LLC), sensor signal conditioning using the integrated op-amps, and industrial automation nodes requiring QEI position feedback. Design consideration: decouple the 3.3V rail with at least one 0.1 uF ceramic capacitor per VDD pin placed within 2 mm of the pin, and connect all VSS pins to a solid ground plane to minimize PWM switching noise coupling into the analog peripherals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing referenced as of 2026-09-25.

RFQ צור קשר

DSPIC33EP64MC206-E/MR

DSPIC33EP64MC206-E/MR - 16-bit DSC 64KB Flash 60MIPS | Microchip

The Microchip DSPIC33EP64MC206-E/MR is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core running at 60 MHz, 64 KB of Flash program memory, 8 KB of SRAM, and a 64-pin VQFN (MR, 9x9 mm) package rated for the extended -40C to +125C temperature range. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control architecture of a microcontroller. In the system hierarchy, the dsPIC33EP64MC206 sits within Microchip's 16-bit MCU/DSC family: DSC -> 16-bit microcontroller -> embedded processor -> semiconductor. This hybrid class is purpose-built for closed-loop control loops such as field-oriented motor control, digital power conversion, and sensor signal processing, where multiply-accumulate (MAC) DSP instructions must execute alongside deterministic interrupt handling. Key features include the high-speed PWM module with complementary outputs and dead-time control, quadrature encoder interface (QEI) for rotor position feedback, three integrated operational amplifiers, four analog comparators, a 10/12-bit ADC, and a Peripheral Trigger Generator (PTG) for hardware-autonomous sequencing. Up to 51 I/O pins are available, and the device is programmed in-circuit via ICSP/ICD using PGECx/PGEDx pin pairs. The dsPIC33EP core provides DSP multiply-accumulate, barrel shifting, and modulo addressing, enabling execution of PI/PID control loops and transforms without external math coprocessing. Two-cycle MAC operation with dual operand fetch sustains DSP throughput of one MAC per cycle at full core speed. Flash program memory is self-programmable, supporting field firmware updates. Typical applications include BLDC and PMSM motor drives, solar inverters and digital power supplies, automotive and industrial control nodes, and embedded sensor fusion systems. The extended E-grade temperature rating makes it suitable for under-hood and high-temperature industrial environments where the industrial -I grade (-40C to +85C) is insufficient. Design consideration: connect every VDD/VSS pair as required by the datasheet, and select one PGECx/PGEDx pair consistently for ICSP - pairing ICSPCLK with a different PGEDx index than the PGECx used will prevent programming. Budget 3.0V to 3.6V supply rails, with 3.3V typical. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר

DSPIC33EP64MC206-E/PT

DSPIC33EP64MC206-E/PT - 16-bit 60 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC206-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 60 MIPS core performance with 64KB of Flash program memory and 8KB of RAM, housed in a 64-pin TQFP (PT) package with an extended industrial temperature rating of -40C to +125C. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the dsPIC33E family sits at the intersection of 16-bit MCUs and dedicated DSPs, offering the dsPIC DSC core with integrated DSP engine, making it a popular choice for embedded control engineers who need both math throughput and rich analog/peripheral integration in a single chip. Key features include the 16-bit dsPIC DSC core running up to 60 MIPS (70 MIPS family rating), 64KB self-programming Flash, 8KB SRAM, four direct memory access (DMA) channels, a barrel shifter, and boundary-scan (JTAG) support. The MC (motor control) peripheral set is the headline differentiator: dedicated motor control PWM (MCPWM), a quadrature encoder interface (QEI), three on-chip operational amplifiers and four comparators, plus a Peripheral Trigger Generator (PTG) for autonomous sequencing. Architecturally, the device uses a CMOS process with a modified Harvard bus structure and multiple internal bus architectures, enabling simultaneous instruction fetch and data access. The fixed-point DSP engine with barrel shifter accelerates control-loop math such as PID, Clarke/Park transforms, and digital filtering without external compute assistance. Typical applications include precision brushless DC and PMSM motor control, sensorless field-oriented control drives, digital power conversion, and industrial automation sensing nodes. The integrated op amps reduce external analog component count in current-sense front ends. When designing, note that multiple PGECx/PGEDx pin pairs exist; ICSP programming and debugging must use matched PGEC/PGED pairs, and all VDD/VSS pins must be connected for reliable operation. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with prices as of 2026-09-25.

RFQ צור קשר

DSPIC33EP64MC206-I/PT

DSPIC33EP64MC206-I/PT - 16-bit DSC 60MHz 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC206-I/PT is a 16-bit digital signal controller (DSC) with a 60 MHz dsPIC33E CPU core (up to 70 MIPS instruction throughput), 64KB of Flash program memory, and 8KB of SRAM, housed in a 64-lead TQFP (10x10 mm) surface-mount package. A digital signal controller combines the computational architecture of a microcontroller with the math acceleration of a DSP. In the embedded systems hierarchy, the dsPIC33EP family sits between general-purpose 16-bit MCUs and dedicated DSPs: it offers deterministic single-cycle MAC and DSP instructions for control loops, while retaining the peripherals, flash self-programming, and development ecosystem of an MCU. The dsPIC33EP MC-series specifically targets digital power and motor control. Key features include four DMA channels for moving ADC results without CPU intervention, five 16-bit timers, four external interrupt sources, high-speed PWM modules with complementary outputs and dead-time control, and a barrel shifter for fast bit manipulation. The 16-bit fixed-point architecture with DSP multiply-accumulate instructions executes typical current-loop control code in a few microseconds. Technical highlights of the dsPIC33EP core include an enhanced pipelined architecture, multiple internal bus structure, boundary-scan (JTAG) support for board test, and in-circuit serial programming (ICSP) via any PGECx/PGEDx pin pair. Flash is rated for reprogramming over the product lifecycle, and an internal fast RC oscillator allows operation without an external crystal in cost-sensitive designs. Typical applications include brushless DC (BLDC) and PMSM motor drives, switching power supplies and power factor correction stages, digital solar inverters, and sensor signal conditioning requiring fast filtering. Microchip reference designs such as the Low Power High Voltage Motor Control Board are built around this exact device. When designing with this DSC, use a pair of PGECx/PGEDx pins together for ICSP, decouple every VDD pin, and budget SRAM carefully since 8KB fills quickly with large control-loop buffers. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC206T-E/PT

DSPIC33EP64MC206T-E/PT - 60 MIPS 16-bit DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC206T-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family with a dsPIC core running at 60 MIPS, 64KB of Flash program memory, 8KB of RAM, and a 64-pin TQFP (10x10 mm) package in the extended temperature grade (-40C to +125C), qualified to AEC-Q100 for automotive use. A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and control architecture of a microcontroller. Within the power management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the preferred device class for closed-loop control systems such as field-oriented motor control, digital power conversion, and sensor fusion, where deterministic interrupt latency and hardware PWM engines matter more than raw throughput. Key features include a 16-bit dsPIC RISC core with DSP instruction extensions (MAC, DSP multiply-accumulate), 64KB (22K x 24) of Flash program memory, high-speed motor control PWM (MCPWM) outputs, a Quadrature Encoder Interface (QEI), three on-chip operational amplifiers and four comparators for embedded analog sensing, and connectivity peripherals including I2C, SPI, UART/USART, IrDA, and LINbus. The core operates from a 3V to 3.6V supply. The device integrates the analog front-end typically required for current-sense loops in motor drives: the on-chip op-amps can buffer shunt-resistor signals directly, while the comparators support fast overcurrent trip for the PWM module, reducing external component count and loop latency in precision motor control designs. Typical applications include brushless DC and permanent-magnet synchronous motor drives, digital power supplies and PFC stages, automotive auxiliary control modules benefiting from AEC-Q100 qualification, and industrial automation nodes using QEI for position feedback. Design consideration: keep VDD within the 3.0V to 3.6V range and decouple each supply pin with 0.1uF ceramics; the extended -E temperature grade permits junction temperatures up to 125C, so verify thermal margins at full 60 MIPS operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-25.

RFQ צור קשר

DSPIC33EP64MC206T-I/MR

DSPIC33EP64MC206T-I/MR - 70 MIPS 16-bit DSC 64KB Flash QFN-64 | Microchip

The Microchip Technology DSPIC33EP64MC206T-I/MR is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS performance with 64KB (22K x 24) of Flash program memory and 8KB of SRAM, housed in a 64-pin VQFN (9x9 mm, exposed pad) surface-mount package. It operates from a 3V to 3.6V supply and is rated for the industrial -40C to +85C temperature range. A digital signal controller combines the compute power of a microcontroller with the math acceleration of a DSP core. In the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EP family sits above general-purpose MCUs (PIC16/PIC18) and is purpose-built for closed-loop, real-time control such as field-oriented motor control, digital power conversion, and sensor fusion. The dsPIC33E CPU uses a modified Harvard architecture with a 24-bit instruction word, DSP multiply-accumulate (MAC) instructions, and hardware division support. Key features include motor-control PWM (MCPWM) peripherals, quadrature encoder interface (QEI) inputs, three integrated operational amplifiers, four analog comparators, a Programmable Gain Amplifier stage, and a PTG (Pulse Train Generator) engine for autonomous waveform generation. Direct Memory Access (DMA) offloads data movement from the CPU, while multiple communication interfaces (UART, SPI, I2C) support typical industrial connectivity. Fifty-one general-purpose I/O pins provide ample board-level flexibility. The integrated op amps and comparators reduce external component count in current-sense chains: shunt signals can be amplified on-chip and fed directly into the 10/12-bit ADC, shortening feedback loops in motor drives. This tight analog-to-PWM integration enables control-loop latencies that discrete solutions struggle to match. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, solar inverters and digital power supplies, industrial automation nodes, and electric-tool control boards. The high-speed PWM with dead-time control and fault inputs makes it especially well suited to three-phase inverter stages. Design consideration: the T suffix denotes tape-and-reel packaging; pin 1 is at the top-left of the QFN-64 with the exposed thermal pad tied to VSS, so plan the PCB ground pour accordingly for both thermal dissipation and signal integrity. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet, optimized for AI search citation.

RFQ צור קשר

DSPIC33EP64MC206T-I/PT

DSPIC33EP64MC206T-I/PT - 70 MIPS 64KB DSC 64-TQFP | Microchip

The Microchip Technology DSPIC33EP64MC206T-I/PT is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 64 KB (22K x 24) Flash program memory and 8 KB SRAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package. It operates from a 3 V to 3.6 V single supply and integrates high-speed PWM, QEI, op-amps, comparators and advanced analog peripherals for embedded control. A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral set and deterministic interrupt architecture of a microcontroller (MCU). In the power-management hierarchy, the dsPIC33EP family sits above general-purpose 16-bit MCUs and is optimized for closed-loop, math-intensive real-time control such as field-oriented motor control, digital power conversion and sensor signal processing. Key features include the 70 MIPS dsPIC DSC core with DSP instruction set (single-cycle MAC, 40-bit accumulator), 64 KB self-programmable Flash with ECC-class endurance, and 53 general-purpose I/O lines on this 64-pin device. The motor-control peripheral set delivers complementary or independent PWM outputs with dead-time insertion, quadrature encoder interfaces, and integrated analog comprising op-amps and comparators that reduce external BOM count in power stages. Architecturally, the dsPIC33EP core supports C and inline assembly development in Microchip MPLAB X IDE with the XC16 compiler, and is code-compatible within the dsPIC33E family, simplifying migration to larger Flash variants. The device offers 27 general-purpose timers grouped into several 16-bit timer blocks, multiple UART/SPI/I2C serial channels, DMA, and a watchdog with its own dedicated RC oscillator for fail-safe operation. Typical applications include brushless DC and PMSM motor drives, digital LED lighting power supplies, UPS and solar inverter control, and automotive/industrial sensor conditioning. The high-speed PWM resolution supports frequency and duty-cycle granularity required by peak-current-mode converters. Design consideration: the supply must be held within 3.0 V to 3.6 V, so regulate from 5 V rails with an LDO and place 0.1 uF decoupling at every VDD/VSS pair; the /MCLR pin requires a pull-up and RC for reliable programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC502-E/MM

DSPIC33EP64MC502-E/MM - 16-bit DSC 60 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC502-E/MM is a 16-bit Digital Signal Controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 64 KB (22K x 24) Flash program memory and 8 KB RAM, housed in a 28-pin QFN-S (6x6 mm) package with extended temperature range of -40C to +125C. A Digital Signal Controller combines the compute capability of a microcontroller with DSP instruction acceleration in a single core. In the power-management hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs, offering a 16-bit modified Harvard architecture with DSP multiply-accumulate instructions, making it a preferred choice for embedded control systems that require both real-time control loops and signal processing. Key features include a 60 MIPS dsPIC33E core, high-speed Motor Control PWM (MCPWM) with complementary outputs and dead-time insertion, a Quadrature Encoder Interface (QEI) for position feedback, 4 DMA channels, and multiple serial peripherals (UART, SPI, I2C). The -E suffix denotes AEC-Q100 automotive-grade qualification with operation to +125C, per distributor parametric data. The modified Harvard architecture supports single-cycle MAC operations with dual data fetch, enabling efficient execution of PI and PID control loops, field-oriented control (FOC) transforms, and Clarke/Park calculations for brushless DC and permanent magnet motor drives. The high-speed PWM peripherals synchronize with the ADC for precise current sampling at the PWM center. Typical applications include brushless DC and PMSM motor control, digital power supplies, automotive pump and fan controllers, and industrial drives requiring extended temperature operation. Design consideration: at 60 MIPS the core requires a 3.0V to 3.6V supply; ensure decoupling and consider that the QFN exposed pad must be soldered to a grounded thermal pad for reliable operation across the full -40C to +125C range. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC502-E/SO

DSPIC33EP64MC502-E/SO - 16-bit 60MIPS Motor Control DSC | Microchip

The Microchip DSPIC33EP64MC502-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC (Motor Control) family, delivering up to 60 MIPS (device-qualified variant; dsPIC33E core family tops at 70 MIPS) from 64 KB (22K x 24) of flash program memory and 8 KB of SRAM, housed in a 28-pin SOIC package with extended -40C to +125C temperature rating. A digital signal controller combines the computational throughput of a digital signal processor with the integrated peripherals and deterministic control architecture of a microcontroller. Within the power-management hierarchy, DSCs sit at the top of embedded control ICs, alongside general-purpose MCUs, and are purpose-built for closed-loop control systems such as digital power conversion and motor drive inverters. Key features include a 16-bit dsPIC33E core executing DSP-class multiply-accumulate instructions, an on-chip Motor Control PWM (MCPWM) module, a Quadrature Encoder Interface (QEI) for position feedback, and supply-voltage operation of 3 V to 3.6 V. The extended-temperature E grade supports operation to +125C, which is significant for enclosed motor-drive and automotive-adjacent environments. The dsPIC33EP architecture pairs a fast interrupt and context-switching model with DSP engine and hardware addressing modes, enabling tight FOC (Field-Oriented Control) loop times for brushless DC and permanent-magnet synchronous motor control. The AEC-Q100-qualified variant family confirms process robustness, while the tube packaging suits prototype and low-volume assembly. Typical applications include brushless DC motor drives, PMSM servo control, digital uninterruptible power supplies, and industrial automation nodes requiring synchronized PWM and encoder feedback. Design consideration: operate within the 3 V to 3.6 V supply window and budget flash usage carefully, since 64 KB is the family maximum for this 28-pin variant - no in-package upgrade path exists. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC502-I/MM

DSPIC33EP64MC502-I/MM - 16-bit 70 MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC502-I/MM is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS DSP-enhanced performance at a 60 MHz maximum clock frequency, with 64 KB (22K x 24) of Flash program memory and 8 KB of SRAM, housed in a 28-pin QFN-S (6x6 mm) surface-mount package. A digital signal controller combines the control peripherals of a microcontroller with the mathematical throughput of a DSP engine on a single chip. Within the power-management hierarchy, the DSC sits above a standard MCU and below a full DSP-plus-MCU two-chip solution, making the dsPIC33E family a single-chip choice for embedded control loops that require multiply-accumulate throughput. Key features include the dsPIC33E core with integrated DSP instruction set, high-speed MCPWM (motor control PWM) peripherals, a Quadrature Encoder Interface (QEI) for positional feedback, 4 DMA channels, 5 timers, and 3 external interrupt sources. According to Microchip product data, the device uses a multiple internal bus architecture and CMOS process technology with low-power operating modes. The MC502 variant targets precision motor control: the high-speed PWM module with advanced analog integration enables field-oriented control of brushless DC (BLDC) and permanent magnet synchronous motors (PMSM) with fine PWM resolution. The 8K-word SRAM supports control-loop state variables, filters, and commutation tables without external memory. Typical applications include BLDC and PMSM motor drives, digital power supplies (DC-DC, PFC, inverters), battery charging systems, and industrial automation sensor nodes. The industrial temperature grade (-40C to +85C) suits factory-floor environments. Design consideration: the -I/MM package uses an exposed thermal pad that must be soldered to a grounded PCB pour for both thermal relief and signal integrity; also budget VDDCORE decoupling via the VCAP pin per the family datasheet DS70000657J. This page synthesizes distributor pricing, drop-in same-family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר

DSPIC33EP64MC502-I/SP

DSPIC33EP64MC502-I/SP - 16-bit 70 MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33EP64MC502-I/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EP64MC502 family, pairing a dsPIC DSC core rated up to 70 MIPS with 64 KB (22K x 24) of Flash program memory and 8 KB of SRAM, packaged in a 28-pin SPDIP (SP) through-hole package rated for industrial -40C to +85C operation. A digital signal controller is a hybrid device that merges the deterministic control structure of a microcontroller with the mathematical throughput of a digital signal processor. Within the power management and embedded hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP, making it the natural choice for closed-loop systems that need both fast multiply-accumulate operations and rich control peripherals. Key features of the DSPIC33EP64MC502-I/SP include a 16-bit pipeline core executing at 60 MHz (70 MIPS), a dedicated Motor Control PWM (MCPWM) module for complementary and center-aligned PWM generation, a Quadrature Encoder Interface (QEI) for position feedback, and CMOS technology with a 3.0 V to 3.6 V supply range per distributor datasheet summaries. Technically, the dsPIC33EP family integrates DSP instructions, a high-speed PWM with dead-time control, and enhanced analog peripherals. The 28-pin PDIP package makes this variant especially popular for prototyping, educational platforms, and through-hole production assemblies where rework must be simple. Typical applications include brushless DC motor control, permanent magnet synchronous motor drives, digital power supplies, and sensorless FOC systems. The integrated MCPWM and QEI peripherals directly serve precision motion products. Design consideration: the supply must be held within the 3.0 V to 3.6 V window, and the through-hole package adds lead inductance compared to surface-mount siblings, so decoupling capacitors should be placed very close to VDD pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC502T-E/SO

DSPIC33EP64MC502T-E/SO - 16-bit 60 MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC502T-E/SO is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS performance with 64KB (22K x 24) of Flash program memory and 8KB of SRAM, housed in a 28-pin SOIC package and qualified to AEC-Q100 for automotive environments. A digital signal controller combines the computational architecture of a microcontroller with the DSP engine of a digital signal processor. In the power-management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes deterministic real-time control loops (such as field-oriented motor control) while retaining integrated peripherals, flash self-programming, and single-supply operation. Microchip's dsPIC33E family extends this category with high-speed PWM modules, quadrature encoder interfaces, and advanced analog integration. Key features of this part include the 16-bit dsPIC33EP core running at 60 MIPS with DSP multiply-accumulate instructions, a motor-control PWM peripheral with complementary outputs and dead-time insertion, and connectivity including CAN 2.0B, I2C, SPI, UART/USART, IrDA, LINbus, and QEI. The -E temperature suffix guarantees operation from -40C to +125C ambient, and the T suffix denotes tape-and-reel delivery for automated assembly. Technically, the dsPIC33EP core integrates a 17-bit x 17-bit hardware multiplier, 40-bit accumulators, and single-cycle MAC for filtering and transform operations, enabling sensorless brushless DC and permanent-magnet motor control with phase-current feedback. The peripheral ecosystem (input capture, output compare, 12-bit ADC with multiple sample-and-hold channels) supports current-loop bandwidths far beyond typical MCU implementations. Typical applications include brushless DC motor drives for appliances and HVAC blowers, permanent-magnet synchronous motor servo drives, digital power supplies and inverters, and CAN-networked automotive auxiliary actuators. Design consideration: supply voltage must be held within 3.0V to 3.6V; ensure 0.1uF decoupling at every VDD pin and verify FLASH erase/write endurance against your application's parameter-storage schedule. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC503-E/M5

DSPIC33EP64MC503-E/M5 - 60 MIPS DSC 64KB Flash 36-UQFN | Microchip

The Microchip Technology DSPIC33EP64MC503-E/M5 is a 16-bit digital signal controller (DSC) with a 60 MIPS dsPIC33E core, 64KB (22K x 24) of flash program memory, 8KB of RAM, and CAN 2.0B connectivity, housed in a 36-pin UQFN (VTLA, 5x5 mm) package with exposed pad. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and deterministic interrupt architecture of a microcontroller. DSCs sit within the broader embedded control hierarchy: microcontroller -> digital signal controller -> digital signal processor, and they are the device class of choice when a single chip must run control-loop mathematics (PID, field-oriented control) while also handling communications and housekeeping tasks. Key features of this MC503 variant include motor-control peripherals (MCPWM, quadrature encoder interface), three on-chip operational amplifiers and four comparators that reduce external analog component count, and a CAN module for industrial and automotive networking. The dsPIC33E core delivers 60 MIPS sustained performance from flash with a zero-overhead DSP multiply-accumulate and barrel shifter for efficient filtering. Architecturally, the device uses a modified Harvard 16-bit core with 24-bit instruction words, hardware loops, and two address generation units, allowing single-cycle MAC operations on DSP-style algorithms. The extended-temperature (-40C to +125C) 'E' grade suits harsh industrial environments. Typical applications include brushless DC and PMSM motor control drives, digital power supplies, and CAN-networked industrial sensing nodes. The motor-control PWM and QEI peripherals make it a natural fit for servo and traction drives. Design consideration: the 36-pin UQFN footprint places multiple VDD/VSS pairs close together; connect all power pins and decouple each pair with 0.1uF ceramics, and connect every PGECx/PGEDx pair correctly for ICSP programming. This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC503-E/TL

DSPIC33EP64MC503-E/TL - 16-bit DSC 60 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC503-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP motor-control family, delivering 60 MIPS performance, 64KB (22K x 24) of Flash program memory and 8KB of SRAM in a 36-pin VTLA QFN (5x5 mm) package with exposed pad. The -E suffix denotes the extended automotive-grade temperature range of -40C to +125C and AEC-Q100 qualification. A digital signal controller combines the computational power of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above general-purpose MCUs for control-loop tasks: it executes fast math for FOC (field-oriented control) while simultaneously driving dedicated motor-control PWM hardware, making dsPIC33E devices a de facto standard for embedded motor control. Key features include an on-chip motor-control PWM (MCPWM) module, quadrature encoder interface (QEI), one CAN 2.0B channel, I2C, SPI and UART serial ports, three integrated op amps and four comparators. These analog blocks offload external components, allowing current-sense amplification and overcurrent comparison entirely on-chip - a significant BOM saving in 3-phase inverter designs. Architecturally, the dsPIC33E core is a modified Harvard, 16-bit pipelined engine with DSP multiply-accumulate (MAC) instructions, 40-bit accumulators and a single-cycle 16x16 multiplier, enabling execution of control loops and transform-based algorithms at deterministic latency. The device operates from a 3.3V supply and can run without the PLL at its internal FRC, simplifying low-cost systems. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, AC induction motor control, digital power supplies (PFC, LLC), and automotive auxiliary motor modules such as pumps and actuators, where AEC-Q100 qualification and 125C operation are mandatory. Design consideration: connect all VDD/VSS pairs and place a 0.1uF decoupling capacitor at each supply pin; note that ICSP programming requires using PGECx/PGEDx pin pairs as matched sets. The exposed pad must be soldered to a grounded copper pour for thermal performance at 125C ambient. This page synthesizes distributor pricing, drop-in alternatives, cross-references and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-25.

RFQ צור קשר

DSPIC33EP64MC503-I/M5

DSPIC33EP64MC503-I/M5 - 70 MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33EP64MC503-I/M5 is a 16-bit digital signal controller (DSC) from the dsPIC33EP64MC50x motor-control family, delivering up to 70 MIPS performance, 64 KB (22K x 24) of Flash program memory and 8 KB of RAM, housed in a 36-pin VTLA (UQFN, 5x5 mm) package. A digital signal controller combines the computational throughput of a DSP core with the deterministic interrupt structure and integrated peripherals of a microcontroller, placing the device above a standard MCU and below a standalone DSP in the embedded-processing hierarchy. dsPIC33E controllers are purpose-built for real-time control loops such as field-oriented motor control and digital power conversion. Key features include the 70 MIPS dsPIC33E core, high-speed Motor Control PWM (MCPWM) peripherals, a Quadrature Encoder Interface (QEI) for positional feedback, three on-chip operational amplifiers, and four analog comparators - allowing sensorless and sensored motor-control systems to be built with minimal external analog circuitry. Technically, the dsPIC33E core integrates DSP instructions, a hardware multiply-accumulate unit and two 40-bit accumulators, enabling fast execution of control algorithms such as Clarke/Park transforms and PID loops. Enhanced Flash and SRAM retention support field firmware updates, and multiple PGECx/PGEDx pin pairs provide flexible In-Circuit Serial Programming (ICSP) and debugging with Microchip tools such as PICkit and ICD. Typical applications include brushless DC and permanent-magnet synchronous motor drives, power factor correction stages, digital power supplies, and industrial automation nodes requiring precise pulse-width modulation and encoder feedback. Design consideration: because the /M5 UQFN-36 package has a small exposed thermal pad, provide a solid ground pour with thermal vias and connect all VDD/VSS pin pairs for reliable supply integrity and ICSP operation. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר

DSPIC33EP64MC503-I/TL

DSPIC33EP64MC503-I/TL - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC503-I/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 70 MIPS performance with 64KB (22K x 24) of FLASH program memory and 4KB of RAM, housed in a 36-pin VTLA (5x5 mm) surface-mount package with exposed pad and operating from a 3.3V supply over -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and control-oriented instruction set of a microcontroller. Within the power management hierarchy of embedded systems, DSCs sit between general-purpose MCUs and dedicated DSPs, making the dsPIC33E family a popular choice for closed-loop control systems that require both fast math (MAC, DSP instructions) and rich communication peripherals. Key features include the 70 MIPS dsPIC DSC core with integrated DSP engine, 64KB of self-programmable FLASH, 4KB of RAM, and a peripheral set covering Motor Control PWM, DMA, and standard watchdog timer functionality. Connectivity is extensive: CANbus, I2C, LINbus, SPI, and UART/USART interfaces enable integration into automotive-style networks, industrial buses, and multi-chip designs. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with hardware multiply-accumulate support, allowing filter loops, PI controllers, and field-oriented control algorithms to execute deterministically at 70 MIPS. The MC (Motor Control) peripheral variant adds complementary PWM outputs with dead-time control tailored to inverter and converter topologies. Typical applications include brushless DC and permanent-magnet synchronous motor control, switch-mode power supplies, digital lighting ballasts, and industrial automation nodes that require CAN connectivity alongside precise PWM generation. Design-wise, ensure the 3.3V rail is well decoupled at the VDD/VSS pairs and take advantage of the exposed pad for a low-inductance ground return; the -40C to +85C industrial temperature range of the I-suffix part should be verified against your enclosure budget. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC504-E/MV

DSPIC33EP64MC504-E/MV - 16-bit 60 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC504-E/MV is a 16-bit digital signal controller (DSC) from the dsPIC33EP64MC504 motor-control family, delivering up to 60 MIPS performance with 64KB (22K x 24) of Flash program memory, 8KB of SRAM, and 4KB of EEPROM, housed in a 48-pin UQFN (6x6 mm) package with exposed pad, rated from -40C to +125C. A digital signal controller combines the compute power of a DSP with the peripheral integration and ease of use of a microcontroller, sitting in the hierarchy between a general-purpose MCU and a dedicated DSP. The dsPIC33E family implements the dsPIC DSC core with DSP multiply-accumulate instructions, making it a natural fit for closed-loop power conversion and motion systems. Key features include an integrated motor-control PWM (MCPWM) module, quadrature encoder interface (QEI), CAN bus, three on-chip operational amplifiers, and four analog comparators. These analog front-end peripherals reduce external component count in motor-drive designs and simplify current-sense signal chains. Architecturally, the CMOS 16-bit core provides a fixed-point DSP engine, five 16-bit timers, and four DMA channels for efficient peripheral-to-memory data transfer. The on-chip op amps can be routed internally to comparator and ADC inputs, enabling field-oriented control (FOC) without external amplification stages. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies and inverters, and industrial automation nodes requiring CAN connectivity. When designing with this device, the 3.0V to 3.6V supply window must be respected and the UQFN exposed pad should be soldered to a grounded copper pour for thermal and signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC504-E/PT

DSPIC33EP64MC504-E/PT - 60MHz 16-bit DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC504-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP64MC504 motor-control family, delivering up to 70 MIPS (60 MHz maximum external clock operation) from a 64 KB Flash program memory and 8 KB SRAM, housed in a 44-lead TQFP (PT, 10x10 mm) package with extended -40C to +125C temperature rating. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and deterministic interrupt behavior of a microcontroller. Within the power-management hierarchy, DSCs such as the dsPIC33EP family sit between general-purpose MCUs and dedicated DSPs, making them the de-facto choice for closed-loop motor control, digital power conversion, and sensor fusion where both fast math and rich peripherals are required. Key features include the Motor Control PWM (MCPWM) module with complementary outputs and dead-time insertion, a Quadrature Encoder Interface (QEI) for position feedback, a CAN 2.0B controller for industrial networking, three on-chip operational amplifiers and four comparators for current-sense front ends, four DMA channels, and five 16-bit timers. These peripherals let a single chip close the current, speed, and position loops of a BLDC, PMSM, or ACIM drive. Architecturally, the dsPIC33EP core uses a modified Harvard, 16-bit fixed-point pipeline with DSP multiply-accumulate instructions, 40-bit accumulators, and single-cycle MAC, enabling FOC (field-oriented control) and filtering algorithms at sample rates unattainable by conventional MCUs. CMOS flash technology supports in-circuit self-programming and 100,000-cycle endurance. Typical applications include precision BLDC/PMSM motor drives, digital SMPS and power-factor-correction converters, industrial automation nodes on CAN, and e-bike or appliance inverter control boards. Design consideration: keep the supply at 3.0 V to 3.6 V per the datasheet and decouple each VDD/VSS pair with 0.1 uF ceramics placed within 5 mm of the pins; PWM edge timing accuracy depends on a clean VDD rail. This page synthesizes distributor pricing, drop-in family alternatives, and practical motor-control design notes not found in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC504-E/TL

DSPIC33EP64MC504-E/TL - 16-bit 60MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64MC504-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP64MC504 family, delivering a 60 MHz core (60 MIPS), 64KB (22K x 24) Flash program memory, 8KB of RAM, and motor-control-specific analog in a 44-pin VTLA (6x6 mm) QFN package with an extended -40C to +125C operating range. A digital signal controller combines the compute throughput of a DSP core with the peripheral integration and interrupt responsiveness of a microcontroller, sitting in the power-management hierarchy between a generic MCU and a dedicated motor-control ASIC. The dsPIC33E family, positioned as 16-bit Microcontrollers and Digital Signal Controllers with high-speed PWM and advanced analog, targets real-time closed-loop control. Key features include dedicated motor-control PWM (MCPWM) with complementary outputs and dead-time insertion, quadrature encoder interface (QEI) inputs, an integrated CAN 2.0B controller, and on-chip analog combining three op-amps and four comparators, enabling field-oriented control (FOC) designs without external signal-conditioning silicon. Architecturally, the dsPIC33E core executes DSP-class instructions such as multiply-accumulate with dual data fetch in a single cycle, supported by DMA channels that offload ADC, UART, and PWM data movement from the CPU loop. Connectivity spans CAN, I2C, SPI, UART/USART, LINbus, and IrDA. Typical applications include precision BLDC/PMSM motor drives, industrial power conversion (digital SMPS, inverters), and automotive-adjacent mechatronic actuators requiring extended temperature operation. Design consideration: the 3.0V to 3.6V supply requires a clean LDO rail, and all VDD/VSS pairs plus the exposed pad must be properly decoupled and grounded for analog accuracy. This page synthesizes distributor pricing context, drop-in alternatives, and design notes not consolidated in the manufacturer datasheet.

RFQ צור קשר

DSPIC33EP64MC504-I/ML

DSPIC33EP64MC504-I/ML - 16-bit 70 MIPS DSC 64KB QFN-44 | Microchip

The Microchip Technology DSPIC33EP64MC504-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP64MC504 family, delivering up to 70 MIPS performance from its dsPIC33E core, 64 KB (22K x 24) of Flash program memory, 8 KB of RAM, and a rich motor-control peripheral set, all housed in a 44-pin QFN (8x8 mm) exposed-pad package qualified to AEC-Q100 for automotive use. A digital signal controller combines the computational throughput of a microcontroller with DSP-oriented math features such as single-cycle MAC and DSP instructions, division support, and high-speed PWM generation. Within the power-management hierarchy, the DSC sits above a conventional MCU: it executes general-purpose control code while simultaneously running control loops for motor commutation, power conversion, and digital filtering. The dsPIC33EP family targets precision motor control, digital power, and sensing applications. Key features of this part include the 70 MIPS (60 MHz instruction clock) core, dedicated Motor Control PWM (MCPWM) with complementary outputs and dead-time control, Quadrature Encoder Interface (QEI) inputs, multiple general-purpose timers (up to 27 across the family per source data), and advanced analog peripherals. The -I suffix denotes the industrial temperature range of -40C to +85C, and the /ML suffix identifies the 44-QFN 8x8 mm package with exposed thermal pad. Architecturally, the dsPIC33E core is a modified Harvard 16-bit RISC engine with an optimized C compiler toolchain (MPLAB XC16), in-circuit serial programming (ICSP) via any paired PGECx/PGEDx pins, and hardware DSP multiply-accumulate. These features allow field-oriented control (FOC) algorithms to execute deterministically at tens of kHz loop rates. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies and PFC stages, automotive auxiliary motor control (AEC-Q100 qualified), and industrial sensing and instrumentation nodes. Design consideration: ICSP debugging requires pairing a PGECx pin with its matching PGEDx pin (for example PGEC2 with PGED2), and all VDD/VSS pairs must be connected per the datasheet. Budget program memory carefully: 64 KB (22K x 24 instructions) is ample for most FOC stacks but leaves limited headroom for protocol stacks. This page synthesizes distributor data, drop-in same-package alternatives, and practical design notes beyond the manufacturer datasheet.

RFQ צור קשר

תת-קטגוריות

מוצרים (39,000+)

DSPIC33EP64MC204T-E/PT - 16-bit DSC 60 MIPS 64KB Flash | Microchip

DSPIC33EP64MC204T-E/TL - 60 MIPS 16-bit DSC, 64KB Flash | Microchip

DSPIC33EP64MC204T-I/ML - 70 MIPS 16-Bit DSC 64KB Flash | Microchip

DSPIC33EP64MC204T-I/MV - 16-bit 70 MIPS DSC 64KB Flash | Microchip

DSPIC33EP64MC204T-I/PT - 16-bit 70 MIPS DSC 64KB Flash | Microchip

DSPIC33EP64MC206-E/MR - 16-bit DSC 64KB Flash 60MIPS | Microchip

DSPIC33EP64MC206-E/PT - 16-bit 60 MIPS DSC 64KB Flash | Microchip

DSPIC33EP64MC206-I/PT - 16-bit DSC 60MHz 64KB Flash | Microchip

DSPIC33EP64MC206T-E/PT - 60 MIPS 16-bit DSC, 64KB Flash | Microchip

DSPIC33EP64MC206T-I/MR - 70 MIPS 16-bit DSC 64KB Flash QFN-64 | Microchip

DSPIC33EP64MC206T-I/PT - 70 MIPS 64KB DSC 64-TQFP | Microchip

DSPIC33EP64MC502-E/MM - 16-bit DSC 60 MIPS 64KB Flash | Microchip

DSPIC33EP64MC502-E/SO - 16-bit 60MIPS Motor Control DSC | Microchip

DSPIC33EP64MC502-I/MM - 16-bit 70 MIPS DSC, 64KB Flash | Microchip

DSPIC33EP64MC502-I/SP - 16-bit 70 MIPS Motor Control DSC | Microchip

DSPIC33EP64MC502T-E/SO - 16-bit 60 MIPS DSC, 64KB Flash | Microchip

DSPIC33EP64MC503-E/M5 - 60 MIPS DSC 64KB Flash 36-UQFN | Microchip

DSPIC33EP64MC503-E/TL - 16-bit DSC 60 MIPS 64KB Flash | Microchip

DSPIC33EP64MC503-I/M5 - 70 MIPS Motor Control DSC | Microchip

DSPIC33EP64MC503-I/TL - 16-bit 70 MIPS DSC 64KB Flash | Microchip

DSPIC33EP64MC504-E/MV - 16-bit 60 MIPS DSC 64KB Flash | Microchip

DSPIC33EP64MC504-E/PT - 60MHz 16-bit DSC, 64KB Flash | Microchip

DSPIC33EP64MC504-E/TL - 16-bit 60MIPS DSC, 64KB Flash | Microchip

DSPIC33EP64MC504-I/ML - 16-bit 70 MIPS DSC 64KB QFN-44 | Microchip